Documentation sysfs-bus-usb: Move files with known users to stable

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 126 insertions, 127 deletions

diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
new file mode 100644
index 00000000000..6b59aeaee75
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-usb
@@ -0,0 +1,126 @@
+What:		/sys/bus/usb/devices/.../power/persist
+Date:		May 2007
+KernelVersion:	2.6.23
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		If CONFIG_USB_PERSIST is set, then each USB device directory
+		will contain a file named power/persist.  The file holds a
+		boolean value (0 or 1) indicating whether or not the
+		"USB-Persist" facility is enabled for the device.  Since the
+		facility is inherently dangerous, it is disabled by default
+		for all devices except hubs.  For more information, see
+		Documentation/usb/persist.txt.
+
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/device/.../power/connected_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been connected to the machine.  This
+		file is read-only.
+Users:
+		PowerTOP <power@bughost.org>
+		http://www.lesswatts.org/projects/powertop/
+
+What:		/sys/bus/usb/device/.../power/active_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been active, i.e. not in a suspended
+		state.  This file is read-only.
+
+		Tools can use this file and the connected_duration file to
+		compute the percentage of time that a device has been active.
+		For example,
+		echo $((100 * `cat active_duration` / `cat connected_duration`))
+		will give an integer percentage.  Note that this does not
+		account for counter wrap.
+Users:
+		PowerTOP <power@bughost.org>
+		http://www.lesswatts.org/projects/powertop/
+
+What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date:		January 2008
+KernelVersion:	2.6.27
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		When read, this file returns 1 if the interface driver
+		for this interface supports autosuspend.  It also
+		returns 1 if no driver has claimed this interface, as an
+		unclaimed interface will not stop the device from being
+		autosuspended if all other interface drivers are idle.
+		The file returns 0 if autosuspend support has not been
+		added to the driver.
+Users:
+		USB PM tool
+		git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch
+
+What:		/sys/bus/usb/devices/.../devnum
+KernelVersion:	since at least 2.6.18
+Description:
+		Device address on the USB bus.
+
+What:		/sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion:	since at least 2.6.18
+Description:
+		bConfigurationValue of the *active* configuration for the
+		device. Writing 0 or -1 to bConfigurationValue will reset the
+		active configuration (unconfigure the device). Writing
+		another value will change the active configuration.
+
+		Note that some devices, in violation of the USB spec, have a
+		configuration with a value equal to 0. Writing 0 to
+		bConfigurationValue for these devices will install that
+		configuration, rather then unconfigure the device.
+
+		Writing -1 will always unconfigure the device.
+
+What:		/sys/bus/usb/devices/.../busnum
+KernelVersion:	2.6.22
+Description:
+		Bus-number of the USB-bus the device is connected to.
+
+What:		/sys/bus/usb/devices/.../descriptors
+KernelVersion:	2.6.26
+Description:
+		Binary file containing cached descriptors of the device. The
+		binary data consists of the device descriptor followed by the
+		descriptors for each configuration of the device.
+		Note that the wTotalLength of the config descriptors can not
+		be trusted, as the device may have a smaller config descriptor
+		than it advertises. The bLength field of each (sub) descriptor
+		can be trusted, and can be used to seek forward one (sub)
+		descriptor at a time until the next config descriptor is found.
+		All descriptors read from this file are in bus-endian format
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 0053ae262a0..1430f584b26 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -1,81 +1,3 @@
-What:		/sys/bus/usb/devices/.../power/autosuspend
-Date:		March 2007
-KernelVersion:	2.6.21
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		Each USB device directory will contain a file named
-		power/autosuspend.  This file holds the time (in seconds)
-		the device must be idle before it will be autosuspended.
-		0 means the device will be autosuspended as soon as
-		possible.  Negative values will prevent the device from
-		being autosuspended at all, and writing a negative value
-		will resume the device if it is already suspended.
-
-		The autosuspend delay for newly-created devices is set to
-		the value of the usbcore.autosuspend module parameter.
-
-What:		/sys/bus/usb/devices/.../power/persist
-Date:		May 2007
-KernelVersion:	2.6.23
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		If CONFIG_USB_PERSIST is set, then each USB device directory
-		will contain a file named power/persist.  The file holds a
-		boolean value (0 or 1) indicating whether or not the
-		"USB-Persist" facility is enabled for the device.  Since the
-		facility is inherently dangerous, it is disabled by default
-		for all devices except hubs.  For more information, see
-		Documentation/usb/persist.txt.
-
-What:		/sys/bus/usb/device/.../power/connected_duration
-Date:		January 2008
-KernelVersion:	2.6.25
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been connected to the machine.  This
-		file is read-only.
-Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
-
-What:		/sys/bus/usb/device/.../power/active_duration
-Date:		January 2008
-KernelVersion:	2.6.25
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been active, i.e. not in a suspended
-		state.  This file is read-only.
-
-		Tools can use this file and the connected_duration file to
-		compute the percentage of time that a device has been active.
-		For example,
-		echo $((100 * `cat active_duration` / `cat connected_duration`))
-		will give an integer percentage.  Note that this does not
-		account for counter wrap.
-Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
-
-What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
-Date:		January 2008
-KernelVersion:	2.6.27
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		When read, this file returns 1 if the interface driver
-		for this interface supports autosuspend.  It also
-		returns 1 if no driver has claimed this interface, as an
-		unclaimed interface will not stop the device from being
-		autosuspended if all other interface drivers are idle.
-		The file returns 0 if autosuspend support has not been
-		added to the driver.
-Users:
-		USB PM tool
-		git://git.moblin.org/users/sarah/usb-pm-tool/
-
 What:		/sys/bus/usb/device/.../authorized
 Date:		July 2008
 KernelVersion:	2.6.26
@@ -172,17 +94,6 @@ Description:
 		device IDs, exactly like reading from the entry
 		"/sys/bus/usb/drivers/.../new_id"
 
-What:		/sys/bus/usb/device/.../avoid_reset_quirk
-Date:		December 2009
-Contact:	Oliver Neukum <oliver@neukum.org>
-Description:
-		Writing 1 to this file tells the kernel that this
-		device will morph into another mode when it is reset.
-		Drivers will not use reset for error handling for
-		such devices.
-Users:
-		usb_modeswitch
-
 What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
 Date:		September 2011
 Contact:	Andiry Xu <andiry.xu@amd.com>
@@ -263,41 +174,3 @@ Description:
 		Supported values are 0 - 15.
 		More information on how besl values map to microseconds can be found in
 		USB 2.0 ECN Errata for Link Power Management, section 4.10)
-
-What:		/sys/bus/usb/devices/.../devnum
-KernelVersion:	since at least 2.6.18
-Description:
-		Device address on the USB bus.
-
-What:		/sys/bus/usb/devices/.../bConfigurationValue
-KernelVersion:	since at least 2.6.18
-Description:
-		bConfigurationValue of the *active* configuration for the
-		device. Writing 0 or -1 to bConfigurationValue will reset the
-		active configuration (unconfigure the device). Writing
-		another value will change the active configuration.
-
-		Note that some devices, in violation of the USB spec, have a
-		configuration with a value equal to 0. Writing 0 to
-		bConfigurationValue for these devices will install that
-		configuration, rather then unconfigure the device.
-
-		Writing -1 will always unconfigure the device.
-
-What:		/sys/bus/usb/devices/.../busnum
-KernelVersion:	2.6.22
-Description:
-		Bus-number of the USB-bus the device is connected to.
-
-What:		/sys/bus/usb/devices/.../descriptors
-KernelVersion:	2.6.26
-Description:
-		Binary file containing cached descriptors of the device. The
-		binary data consists of the device descriptor followed by the
-		descriptors for each configuration of the device.
-		Note that the wTotalLength of the config descriptors can not
-		be trusted, as the device may have a smaller config descriptor
-		than it advertises. The bLength field of each (sub) descriptor
-		can be trusted, and can be used to seek forward one (sub)
-		descriptor at a time until the next config descriptor is found.
-		All descriptors read from this file are in bus-endian format