Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull clock framework update from Michael Turquette:
 "The common clock framework changes for 3.9 are almost entirely fixes.

  None are dire enough to be Cc'd to stable which may be interpreted to
  mean that users of the framework are reaching stability.  Lots of new
  adoption of this framework is via DeviceTree data and that comes
  through the respective architecture and platform trees instead of
  through the clk framework tree.

  Two new features are improved debugfs output and an improvement to how
  DT clocks are initialized by reusing a common method."

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (25 commits)
  clk: sunxi: remove stale Makefile entry
  clk: vexpress: Use common of_clk_init() function
  clk: zynq: Use common of_clk_init() function
  clk: vt8500: Use common of_clk_init() function
  clk: highbank: Use common of_clk_init() function
  clk: sunxi: Use common of_clk_init() function
  clk: add common of_clk_init() function
  clk: Deduplicate exit code in clk_set_rate
  clk: beautify Makefile
  clk-divider: fix macros
  clk: prima2: enable dt-binding clkdev mapping
  clk: mxs: Index is always positive
  clk: max77686: Avoid double free at remove time
  clk: remove exported function from __init section
  clk: vt8500: Add support for WM8750/WM8850 PLL clocks
  clk: vt8500: Fix division-by-0 when requested rate=0
  clk: vt8500: Fix device clock divisor calculations
  clk: vt8500: Fix error in PLL calculations on non-exact match.
  clk: max77686: Remove unnecessary NULL checking for container_of()
  clk: JSON debugfs clock tree summary
  ...

1 files changed, 73 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/prima2-clock.txt b/Documentation/devicetree/bindings/clock/prima2-clock.txt
new file mode 100644
index 00000000000..5016979c0f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/prima2-clock.txt
@@ -0,0 +1,73 @@
+* Clock bindings for CSR SiRFprimaII
+
+Required properties:
+- compatible: Should be "sirf,prima2-clkc"
+- reg: Address and length of the register set
+- interrupts: Should contain clock controller interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of prima2
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	rtc			0
+	osc             	1
+	pll1            	2
+	pll2            	3
+	pll3            	4
+	mem             	5
+	sys             	6
+	security        	7
+	dsp             	8
+	gps             	9
+	mf              	10
+	io              	11
+	cpu             	12
+	uart0           	13
+	uart1           	14
+	uart2           	15
+	tsc             	16
+	i2c0            	17
+	i2c1            	18
+	spi0            	19
+	spi1            	20
+	pwmc            	21
+	efuse           	22
+	pulse           	23
+	dmac0           	24
+	dmac1           	25
+	nand            	26
+	audio           	27
+	usp0            	28
+	usp1            	29
+	usp2            	30
+	vip             	31
+	gfx             	32
+	mm              	33
+	lcd             	34
+	vpp             	35
+	mmc01           	36
+	mmc23           	37
+	mmc45           	38
+	usbpll          	39
+	usb0            	40
+	usb1			41
+
+Examples:
+
+clks: clock-controller@88000000 {
+	compatible = "sirf,prima2-clkc";
+	reg = <0x88000000 0x1000>;
+	interrupts = <3>;
+	#clock-cells = <1>;
+};
+
+i2c0: i2c@b00e0000 {
+	cell-index = <0>;
+	compatible = "sirf,prima2-i2c";
+	reg = <0xb00e0000 0x10000>;
+	interrupts = <24>;
+	clocks = <&clks 17>;
+};