V4L/DVB (5062): SN9C102 driver updates

- Add support for SN9C105 and SN9C120
- Add some more USB device identifiers
- Add support for OV7660
- Implement audio ioctl's and VIDIOC_ENUM_FRAMESIZES
- Add preliminary support for 0x0c45/0x6007
- Documentation updates
- Generic improvements
Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 152 insertions, 94 deletions

diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt
index 8cda472db36..2913da3d087 100644
--- a/Documentation/video4linux/sn9c102.txt
+++ b/Documentation/video4linux/sn9c102.txt
@@ -1,5 +1,5 @@
 
-			 SN9C10x PC Camera Controllers
+			 SN9C1xx PC Camera Controllers
 				Driver for Linux
 			 =============================
 
@@ -53,20 +53,14 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 
 4. Overview and features
 ========================
-This driver attempts to support the video interface of the devices mounting the
-SONiX SN9C101, SN9C102 and SN9C103 PC Camera Controllers.
-
-It's worth to note that SONiX has never collaborated with the author during the
-development of this project, despite several requests for enough detailed
-specifications of the register tables, compression engine and video data format
-of the above chips. Nevertheless, these informations are no longer necessary,
-because all the aspects related to these chips are known and have been
-described in detail in this documentation.
+This driver attempts to support the video interface of the devices assembling
+the SONiX SN9C101, SN9C102, SN9C103, SN9C105 and SN9C120 PC Camera Controllers
+("SN9C1xx" from now on).
 
 The driver relies on the Video4Linux2 and USB core modules. It has been
 designed to run properly on SMP systems as well.
 
-The latest version of the SN9C10x driver can be found at the following URL:
+The latest version of the SN9C1xx driver can be found at the following URL:
 http://www.linux-projects.org/
 
 Some of the features of the driver are:
@@ -85,11 +79,11 @@ Some of the features of the driver are:
   high compression quality (see also "Notes for V4L2 application developers"
   and "Video frame formats" paragraphs);
 - full support for the capabilities of many of the possible image sensors that
-  can be connected to the SN9C10x bridges, including, for instance, red, green,
+  can be connected to the SN9C1xx bridges, including, for instance, red, green,
   blue and global gain adjustments and exposure (see "Supported devices"
   paragraph for details);
 - use of default color settings for sunlight conditions;
-- dynamic I/O interface for both SN9C10x and image sensor control and
+- dynamic I/O interface for both SN9C1xx and image sensor control and
   monitoring (see "Optional device control through 'sysfs'" paragraph);
 - dynamic driver control thanks to various module parameters (see "Module
   parameters" paragraph);
@@ -130,8 +124,8 @@ necessary:
 	CONFIG_USB_UHCI_HCD=m
 	CONFIG_USB_OHCI_HCD=m
 
-The SN9C103 controller also provides a built-in microphone interface. It is
-supported by the USB Audio driver thanks to the ALSA API:
+The SN9C103, SN9c105 and SN9C120 controllers also provide a built-in microphone
+interface. It is supported by the USB Audio driver thanks to the ALSA API:
 
 	# Sound
 	#
@@ -155,18 +149,27 @@ And finally:
 6. Module loading
 =================
 To use the driver, it is necessary to load the "sn9c102" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+after every other module required: "videodev", "v4l2_common", "compat_ioctl32",
+"usbcore" and, depending on the USB host controller you have, "ehci-hcd",
+"uhci-hcd" or "ohci-hcd".
 
 Loading can be done as shown below:
 
 	[root@localhost home]# modprobe sn9c102
 
-At this point the devices should be recognized. You can invoke "dmesg" to
-analyze kernel messages and verify that the loading process has gone well:
+Note that the module is called "sn9c102" for historic reasons, althought it
+does not just support the SN9C102.
+
+At this point all the devices supported by the driver and connected to the USB
+ports should be recognized. You can invoke "dmesg" to analyze kernel messages
+and verify that the loading process has gone well:
 
 	[user@localhost home]$ dmesg
 
+or, to isolate all the kernel messages generated by the driver:
+
+	[user@localhost home]$ dmesg | grep sn9c102
+
 
 7. Module parameters
 ====================
@@ -198,10 +201,11 @@ Default:        0
 -------------------------------------------------------------------------------
 Name:           frame_timeout
 Type:           uint array (min = 0, max = 64)
-Syntax:         <n[,...]>
-Description:    Timeout for a video frame in seconds. This parameter is
-		specific for each detected camera. This parameter can be
-		changed at runtime thanks to the /sys filesystem interface.
+Syntax:         <0|n[,...]>
+Description:    Timeout for a video frame in seconds before returning an I/O
+		error; 0 for infinity. This parameter is specific for each
+		detected camera and can be changed at runtime thanks to the
+		/sys filesystem interface.
 Default:        2
 -------------------------------------------------------------------------------
 Name:           debug
@@ -223,20 +227,21 @@ Default:        2
 8. Optional device control through "sysfs" [1]
 ==========================================
 If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
-it is possible to read and write both the SN9C10x and the image sensor
+it is possible to read and write both the SN9C1xx and the image sensor
 registers by using the "sysfs" filesystem interface.
 
 Every time a supported device is recognized, a write-only file named "green" is
 created in the /sys/class/video4linux/videoX directory. You can set the green
 channel's gain by writing the desired value to it. The value may range from 0
-to 15 for SN9C101 or SN9C102 bridges, from 0 to 127 for SN9C103 bridges.
-Similarly, only for SN9C103 controllers, blue and red gain control files are
-available in the same directory, for which accepted values may range from 0 to
-127.
+to 15 for the SN9C101 or SN9C102 bridges, from 0 to 127 for the SN9C103,
+SN9C105 and SN9C120 bridges.
+Similarly, only for the SN9C103, SN9C105 and SN9120 controllers, blue and red
+gain control files are available in the same directory, for which accepted
+values may range from 0 to 127.
 
 There are other four entries in the directory above for each registered camera:
 "reg", "val", "i2c_reg" and "i2c_val". The first two files control the
-SN9C10x bridge, while the other two control the sensor chip. "reg" and
+SN9C1xx bridge, while the other two control the sensor chip. "reg" and
 "i2c_reg" hold the values of the current register index where the following
 reading/writing operations are addressed at through "val" and "i2c_val". Their
 use is not intended for end-users. Note that "i2c_reg" and "i2c_val" will not
@@ -259,61 +264,84 @@ Now let's set the green gain's register of the SN9C101 or SN9C102 chips to 2:
 	[root@localhost #] echo 0x11 > reg
 	[root@localhost #] echo 2 > val
 
-Note that the SN9C10x always returns 0 when some of its registers are read.
+Note that the SN9C1xx always returns 0 when some of its registers are read.
 To avoid race conditions, all the I/O accesses to the above files are
 serialized.
-
 The sysfs interface also provides the "frame_header" entry, which exports the
 frame header of the most recent requested and captured video frame. The header
-is always 18-bytes long and is appended to every video frame by the SN9C10x
+is always 18-bytes long and is appended to every video frame by the SN9C1xx
 controllers. As an example, this additional information can be used by the user
 application for implementing auto-exposure features via software.
 
-The following table describes the frame header:
-
-Byte #  Value         Description
-------  -----         -----------
-0x00    0xFF          Frame synchronisation pattern.
-0x01    0xFF          Frame synchronisation pattern.
-0x02    0x00          Frame synchronisation pattern.
-0x03    0xC4          Frame synchronisation pattern.
-0x04    0xC4          Frame synchronisation pattern.
-0x05    0x96          Frame synchronisation pattern.
-0x06    0xXX          Unknown meaning. The exact value depends on the chip;
-		      possible values are 0x00, 0x01 and 0x20.
-0x07    0xXX          Variable value, whose bits are ff00uzzc, where ff is a
-		      frame counter, u is unknown, zz is a size indicator
-		      (00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
-		      "compression enabled" (1 = yes, 0 = no).
-0x08    0xXX          Brightness sum inside Auto-Exposure area (low-byte).
-0x09    0xXX          Brightness sum inside Auto-Exposure area (high-byte).
-		      For a pure white image, this number will be equal to 500
-		      times the area of the specified AE area. For images
-		      that are not pure white, the value scales down according
-		      to relative whiteness.
-0x0A    0xXX          Brightness sum outside Auto-Exposure area (low-byte).
-0x0B    0xXX          Brightness sum outside Auto-Exposure area (high-byte).
-		      For a pure white image, this number will be equal to 125
-		      times the area outside of the specified AE area. For
-		      images that are not pure white, the value scales down
-		      according to relative whiteness.
-		      according to relative whiteness.
-
-The following bytes are used by the SN9C103 bridge only:
-
-0x0C    0xXX          Unknown meaning
-0x0D    0xXX          Unknown meaning
-0x0E    0xXX          Unknown meaning
-0x0F    0xXX          Unknown meaning
-0x10    0xXX          Unknown meaning
-0x11    0xXX          Unknown meaning
+The following table describes the frame header exported by the SN9C101 and
+SN9C102:
+
+Byte #  Value or bits Description
+------  ------------- -----------
+0x00    0xFF          Frame synchronisation pattern
+0x01    0xFF          Frame synchronisation pattern
+0x02    0x00          Frame synchronisation pattern
+0x03    0xC4          Frame synchronisation pattern
+0x04    0xC4          Frame synchronisation pattern
+0x05    0x96          Frame synchronisation pattern
+0x06    [3:0]         Read channel gain control = (1+R_GAIN/8)
+	[7:4]         Blue channel gain control = (1+B_GAIN/8)
+0x07    [ 0 ]         Compression mode. 0=No compression, 1=Compression enabled
+	[2:1]         Maximum scale factor for compression
+	[ 3 ]         1 = USB fifo(2K bytes) is full
+	[ 4 ]         1 = Digital gain is finish
+	[ 5 ]         1 = Exposure is finish
+	[7:6]         Frame index
+0x08    [7:0]         Y sum inside Auto-Exposure area (low-byte)
+0x09    [7:0]         Y sum inside Auto-Exposure area (high-byte)
+		      where Y sum = (R/4 + 5G/16 + B/8) / 32
+0x0A    [7:0]         Y sum outside Auto-Exposure area (low-byte)
+0x0B    [7:0]         Y sum outside Auto-Exposure area (high-byte)
+		      where Y sum = (R/4 + 5G/16 + B/8) / 128
+0x0C    0xXX          Not used
+0x0D    0xXX          Not used
+0x0E    0xXX          Not used
+0x0F    0xXX          Not used
+0x10    0xXX          Not used
+0x11    0xXX          Not used
+
+The following table describes the frame header exported by the SN9C103:
+
+Byte #  Value or bits Description
+------  ------------- -----------
+0x00    0xFF          Frame synchronisation pattern
+0x01    0xFF          Frame synchronisation pattern
+0x02    0x00          Frame synchronisation pattern
+0x03    0xC4          Frame synchronisation pattern
+0x04    0xC4          Frame synchronisation pattern
+0x05    0x96          Frame synchronisation pattern
+0x06    [6:0]         Read channel gain control = (1/2+R_GAIN/64)
+0x07    [6:0]         Blue channel gain control = (1/2+B_GAIN/64)
+	[7:4]
+0x08    [ 0 ]         Compression mode. 0=No compression, 1=Compression enabled
+	[2:1]         Maximum scale factor for compression
+	[ 3 ]         1 = USB fifo(2K bytes) is full
+	[ 4 ]         1 = Digital gain is finish
+	[ 5 ]         1 = Exposure is finish
+	[7:6]         Frame index
+0x09    [7:0]         Y sum inside Auto-Exposure area (low-byte)
+0x0A    [7:0]         Y sum inside Auto-Exposure area (high-byte)
+		      where Y sum = (R/4 + 5G/16 + B/8) / 32
+0x0B    [7:0]         Y sum outside Auto-Exposure area (low-byte)
+0x0C    [7:0]         Y sum outside Auto-Exposure area (high-byte)
+		      where Y sum = (R/4 + 5G/16 + B/8) / 128
+0x0D    [1:0]         Audio frame number
+	[ 2 ]         1 = Audio is recording
+0x0E    [7:0]         Audio summation (low-byte)
+0x0F    [7:0]         Audio summation (high-byte)
+0x10    [7:0]         Audio sample count
+0x11    [7:0]         Audio peak data in audio frame
 
 The AE area (sx, sy, ex, ey) in the active window can be set by programming the
-registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C10x controllers, where one unit
+registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C1xx controllers, where one unit
 corresponds to 32 pixels.
 
-[1] Part of the meaning of the frame header has been documented by Bertrik
-    Sikken.
+[1] The frame headers exported by the SN9C105 and SN9C120 are not described.
 
 
 9. Supported devices
@@ -323,15 +351,19 @@ here. They have never collaborated with the author, so no advertising.
 
 From the point of view of a driver, what unambiguously identify a device are
 its vendor and product USB identifiers. Below is a list of known identifiers of
-devices mounting the SN9C10x PC camera controllers:
+devices assembling the SN9C1xx PC camera controllers:
 
 Vendor ID  Product ID
 ---------  ----------
+0x0471     0x0327
+0x0471     0x0328
 0x0c45     0x6001
 0x0c45     0x6005
 0x0c45     0x6007
 0x0c45     0x6009
 0x0c45     0x600d
+0x0c45     0x6011
+0x0c45     0x6019
 0x0c45     0x6024
 0x0c45     0x6025
 0x0c45     0x6028
@@ -342,6 +374,7 @@ Vendor ID  Product ID
 0x0c45     0x602d
 0x0c45     0x602e
 0x0c45     0x6030
+0x0c45     0x603f
 0x0c45     0x6080
 0x0c45     0x6082
 0x0c45     0x6083
@@ -368,24 +401,40 @@ Vendor ID  Product ID
 0x0c45     0x60bb
 0x0c45     0x60bc
 0x0c45     0x60be
+0x0c45     0x60c0
+0x0c45     0x60c8
+0x0c45     0x60cc
+0x0c45     0x60ea
+0x0c45     0x60ec
+0x0c45     0x60fa
+0x0c45     0x60fb
+0x0c45     0x60fc
+0x0c45     0x60fe
+0x0c45     0x6130
+0x0c45     0x613a
+0x0c45     0x613b
+0x0c45     0x613c
+0x0c45     0x613e
 
 The list above does not imply that all those devices work with this driver: up
-until now only the ones that mount the following image sensors are supported;
-kernel messages will always tell you whether this is the case:
+until now only the ones that assemble the following image sensors are
+supported; kernel messages will always tell you whether this is the case (see
+"Module loading" paragraph):
 
 Model       Manufacturer
 -----       ------------
 HV7131D     Hynix Semiconductor, Inc.
 MI-0343     Micron Technology, Inc.
 OV7630      OmniVision Technologies, Inc.
+OV7660      OmniVision Technologies, Inc.
 PAS106B     PixArt Imaging, Inc.
 PAS202BCA   PixArt Imaging, Inc.
 PAS202BCB   PixArt Imaging, Inc.
 TAS5110C1B  Taiwan Advanced Sensor Corporation
 TAS5130D1B  Taiwan Advanced Sensor Corporation
 
-All the available control settings of each image sensor are supported through
-the V4L2 interface.
+Some of the available control settings of each image sensor are supported
+through the V4L2 interface.
 
 Donations of new models for further testing and support would be much
 appreciated. Non-available hardware will not be supported by the author of this
@@ -429,12 +478,15 @@ supplied by this driver).
 
 11. Video frame formats [1]
 =======================
-The SN9C10x PC Camera Controllers can send images in two possible video
-formats over the USB: either native "Sequential RGB Bayer" or Huffman
-compressed. The latter is used to achieve high frame rates. The current video
-format may be selected or queried from the user application by calling the
-VIDIOC_S_FMT or VIDIOC_G_FMT ioctl's, as described in the V4L2 API
-specifications.
+The SN9C1xx PC Camera Controllers can send images in two possible video
+formats over the USB: either native "Sequential RGB Bayer" or compressed.
+The compression is used to achieve high frame rates. With regard to the
+SN9C101, SN9C102 and SN9C103, the compression is based on the Huffman encoding
+algorithm described below, while the SN9C105 and SN9C120 the compression is
+based on the JPEG standard.
+The current video format may be selected or queried from the user application
+by calling the VIDIOC_S_FMT or VIDIOC_G_FMT ioctl's, as described in the V4L2
+API specifications.
 
 The name "Sequential Bayer" indicates the organization of the red, green and
 blue pixels in one video frame. Each pixel is associated with a 8-bit long
@@ -447,14 +499,14 @@ G[m]   R[m+1]  G[m+2]  R[m+2]  ...   G[2m-2]        R[2m-1]
 ...                                  G[n(m-2)]      R[n(m-1)]
 
 The above matrix also represents the sequential or progressive read-out mode of
-the (n, m) Bayer color filter array used in many CCD/CMOS image sensors.
+the (n, m) Bayer color filter array used in many CCD or CMOS image sensors.
 
-One compressed video frame consists of a bitstream that encodes for every R, G,
-or B pixel the difference between the value of the pixel itself and some
-reference pixel value. Pixels are organised in the Bayer pattern and the Bayer
-sub-pixels are tracked individually and alternatingly. For example, in the
-first line values for the B and G1 pixels are alternatingly encoded, while in
-the second line values for the G2 and R pixels are alternatingly encoded.
+The Huffman compressed video frame consists of a bitstream that encodes for
+every R, G, or B pixel the difference between the value of the pixel itself and
+some reference pixel value. Pixels are organised in the Bayer pattern and the
+Bayer sub-pixels are tracked individually and alternatingly. For example, in
+the first line values for the B and G1 pixels are alternatingly encoded, while
+in the second line values for the G2 and R pixels are alternatingly encoded.
 
 The pixel reference value is calculated as follows:
 - the 4 top left pixels are encoded in raw uncompressed 8-bit format;
@@ -470,8 +522,9 @@ The pixel reference value is calculated as follows:
   decoding.
 
 The algorithm purely describes the conversion from compressed Bayer code used
-in the SN9C10x chips to uncompressed Bayer. Additional steps are required to
-convert this to a color image (i.e. a color interpolation algorithm).
+in the SN9C101, SN9C102 and SN9C103 chips to uncompressed Bayer. Additional
+steps are required to convert this to a color image (i.e. a color interpolation
+algorithm).
 
 The following Huffman codes have been found:
 0: +0 (relative to reference pixel value)
@@ -506,13 +559,18 @@ order):
 - Philippe Coval for having helped testing the PAS202BCA image sensor;
 - Joao Rodrigo Fuzaro, Joao Limirio, Claudio Filho and Caio Begotti for the
   donation of a webcam;
+- Dennis Heitmann for the donation of a webcam;
 - Jon Hollstrom for the donation of a webcam;
+- Nick McGill for the donation of a webcam;
 - Carlos Eduardo Medaglia Dyonisio, who added the support for the PAS202BCB
   image sensor;
 - Stefano Mozzi, who donated 45 EU;
 - Andrew Pearce for the donation of a webcam;
+- John Pullan for the donation of a webcam;
 - Bertrik Sikken, who reverse-engineered and documented the Huffman compression
-  algorithm used in the SN9C10x controllers and implemented the first decoder;
+  algorithm used in the SN9C101, SN9C102 and SN9C103 controllers and
+  implemented the first decoder;
 - Mizuno Takafumi for the donation of a webcam;
 - an "anonymous" donator (who didn't want his name to be revealed) for the
   donation of a webcam.
+- an anonymous donator for the donation of four webcams.