Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits)
  ALSA: hda: Storage class should be before const qualifier
  ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies
  ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT
  ASoC: sdp4430 - add sdp4430 pcm ops to DAI.
  ASoC: TWL6040: Enable earphone path in codec
  ASoC: SDP4430: Add support for Earphone speaker
  ASoC: SDP4430: Add sdp4430 machine driver
  ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF
  ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function
  ALSA: sound/pci/asihpi: Use kzalloc
  ALSA: hdmi - dont fail on extra nodes
  ALSA: intelhdmi - add id for the CougarPoint chipset
  ALSA: intelhdmi - user friendly codec name
  ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS
  ALSA: asihpi: incorrect range check
  ALSA: asihpi: testing the wrong variable
  ALSA: es1688: add pedantic range checks
  ARM: McBSP: Add support for omap4 in McBSP driver
  ARM: McBSP: Fix request for irq in OMAP4
  OMAP: McBSP: Add 32-bit mode support
  ...

2 files changed, 21 insertions, 14 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index bfcbbf88c44..2075bbb8b3e 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -227,6 +227,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-asihpi
+  -----------------
+
+    Module for AudioScience ASI soundcards
+
+    enable_hpi_hwdep	- enable HPI hwdep for AudioScience soundcard
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-atiixp
   -----------------
 
@@ -622,28 +632,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     
     The power-management is supported.
 
-  Module snd-es968
-  ----------------
-
-    Module for sound cards based on ESS ES968 chip (PnP only).
-
-    This module supports multiple cards, PnP and autoprobe.
-    
-    The power-management is supported.
-
   Module snd-es1688
   -----------------
 
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
-    port	- port # for ES-1688 chip (0x220,0x240,0x260)
-    fm_port	- port # for OPL3 (option; share the same port as default)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
-    irq		- IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
+    fm_port	- port # for OPL3 (option; share the same port as default)
+
+    with isapnp=0, the following additional options are available:
+    port	- port # for ES-1688 chip (0x220,0x240,0x260)
+    irq		- IRQ # for ES-1688 chip (5,7,9,10)
     dma8	- DMA # for ES-1688 chip (0,1,3)
 
-    This module supports multiple cards and autoprobe (without MPU-401 port).
+    This module supports multiple cards and autoprobe (without MPU-401 port)
+    and PnP with the ES968 chip.
 
   Module snd-es18xx
   -----------------
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 98d14cb8a85..bdafdbd3256 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -204,7 +204,6 @@ generic parser regardless of the codec.  Usually the codec-specific
 parser is much better than the generic parser (as now).  Thus this
 option is more about the debugging purpose.
 
-
 Speaker and Headphone Output
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 One of the most frequent (and obvious) bugs with HD-audio is the
@@ -600,6 +599,9 @@ probing, the proc file is available, so you can get the raw codec
 information before modified by the driver.  Of course, the driver
 isn't usable with `probe_only=1`.  But you can continue the
 configuration via hwdep sysfs file if hda-reconfig option is enabled.
+Using `probe_only` mask 2 skips the reset of HDA codecs (use
+`probe_only=3` as module option). The hwdep interface can be used
+to determine the BIOS codec initialization.
 
 
 hda-verb