Merge branch 'topic/isa' into topic/misc

6 files changed, 75 insertions, 22 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 2075bbb8b3e..d0eb696d32e 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -300,6 +300,74 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
            control correctly. If you have problems regarding this, try
            another ALSA compliant mixer (alsamixer works).
 
+  Module snd-azt1605
+  ------------------
+
+    Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605
+    chipset.
+
+    port	- port # for BASE (0x220,0x240,0x260,0x280)
+    wss_port	- port # for WSS (0x530,0x604,0xe80,0xf40)
+    irq		- IRQ # for WSS (7,9,10,11)
+    dma1	- DMA # for WSS playback (0,1,3)
+    dma2	- DMA # for WSS capture (0,1), -1 = disabled (default)
+    mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+    mpu_irq	- IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
+    fm_port	- port # for OPL3 (0x388), -1 = disabled (default)
+
+    This module supports multiple cards. It does not support autoprobe: port,
+    wss_port, irq and dma1 have to be specified. The other values are
+    optional.
+
+    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+    or the value stored in the card's EEPROM for cards that have an EEPROM and
+    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+    be choosen freely from the options enumerated above.
+
+    If dma2 is specified and different from dma1, the card will operate in
+    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+    enable capture since only channels 0 and 1 are available for capture.
+
+    Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+    mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+    Whatever IRQ and DMA channels you pick, be sure to reserve them for
+    legacy ISA in your BIOS.
+
+  Module snd-azt2316
+  ------------------
+
+    Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316
+    chipset.
+
+    port	- port # for BASE (0x220,0x240,0x260,0x280)
+    wss_port	- port # for WSS (0x530,0x604,0xe80,0xf40)
+    irq		- IRQ # for WSS (7,9,10,11)
+    dma1	- DMA # for WSS playback (0,1,3)
+    dma2	- DMA # for WSS capture (0,1), -1 = disabled (default)
+    mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+    mpu_irq	- IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
+    fm_port	- port # for OPL3 (0x388), -1 = disabled (default)
+
+    This module supports multiple cards. It does not support autoprobe: port,
+    wss_port, irq and dma1 have to be specified. The other values are
+    optional.
+
+    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+    or the value stored in the card's EEPROM for cards that have an EEPROM and
+    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+    be choosen freely from the options enumerated above.
+
+    If dma2 is specified and different from dma1, the card will operate in
+    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+    enable capture since only channels 0 and 1 are available for capture.
+
+    Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+    mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+    Whatever IRQ and DMA channels you pick, be sure to reserve them for
+    legacy ISA in your BIOS.
+
   Module snd-aw2
   --------------
 
@@ -1285,7 +1353,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     about this driver.  Note that it has been discontinued, but the 
     Voyetra Turtle Beach knowledge base entry for it is still available
     at
-	http://www.turtlebeach.com/site/kb_ftp/790.asp
+	http://www.turtlebeach.com
 
   Module snd-msnd-pinnacle
   ------------------------
@@ -1641,20 +1709,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
 
-  Module snd-sgalaxy
-  ------------------
-
-    Module for Aztech Sound Galaxy sound card.
-
-    sbport	- Port # for SB16 interface (0x220,0x240)
-    wssport	- Port # for WSS interface (0x530,0xe80,0xf40,0x604)
-    irq		- IRQ # (7,9,10,11)
-    dma1	- DMA #
-
-    This module supports multiple cards.
-
-    The power-management is supported.
-
   Module snd-sscape
   -----------------
 
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index bdafdbd3256..278cc2122ea 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -562,7 +562,7 @@ compare the codec registers directly.
 Send a bug report either the followings:
 
 kernel-bugzilla::
-  http://bugme.linux-foundation.org/
+  https://bugzilla.kernel.org/
 alsa-devel ML::
   alsa-devel@alsa-project.org
 
diff --git a/Documentation/sound/alsa/soc/DAI.txt b/Documentation/sound/alsa/soc/DAI.txt
index 0ebd7ea9706..c9679264c55 100644
--- a/Documentation/sound/alsa/soc/DAI.txt
+++ b/Documentation/sound/alsa/soc/DAI.txt
@@ -13,7 +13,7 @@ frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
 frame is 21uS long and is divided into 13 time slots.
 
 The AC97 specification can be found at :-
-http://www.intel.com/design/chipsets/audio/ac97_r23.pdf
+http://www.intel.com/p/en_US/business/design
 
 
 I2S
diff --git a/Documentation/sound/alsa/soc/codec.txt b/Documentation/sound/alsa/soc/codec.txt
index 1e95342ed72..37ba3a72cb7 100644
--- a/Documentation/sound/alsa/soc/codec.txt
+++ b/Documentation/sound/alsa/soc/codec.txt
@@ -143,7 +143,7 @@ struct snd_soc_ops {
 };
 
 Please refer to the ALSA driver PCM documentation for details.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 
 5 - DAPM description.
diff --git a/Documentation/sound/alsa/soc/platform.txt b/Documentation/sound/alsa/soc/platform.txt
index b681d17fc38..06d835987c6 100644
--- a/Documentation/sound/alsa/soc/platform.txt
+++ b/Documentation/sound/alsa/soc/platform.txt
@@ -39,7 +39,7 @@ struct snd_soc_platform {
 };
 
 Please refer to the ALSA driver documentation for details of audio DMA.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 An example DMA driver is soc/pxa/pxa2xx-pcm.c
 
diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS
index fd42b05b2f5..c615debbf08 100644
--- a/Documentation/sound/oss/README.OSS
+++ b/Documentation/sound/oss/README.OSS
@@ -36,7 +36,7 @@ with OSS API.
 
 Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z"
 contain useful utilities to be used with this driver.
-See http://www.opensound.com/ossfree/getting.html for
+See http://www.opensound.com/ossfree/ for
 download instructions.
 
 If you are looking for the installation instructions, please
@@ -1438,7 +1438,7 @@ of this driver (see http://www.4Front-tech.com/oss.html for more info).
 There are some common audio chipsets that are not supported yet. For example
 Sierra Aria and IBM Mwave. It's possible that these architectures
 get some support in future but I can't make any promises. Just look
-at the home page (http://www.opensound.com/ossfree/new_cards.html)
+at the home page (http://www.opensound.com/ossfree/)
 for latest info.
 
 Information about unsupported sound cards and chipsets is welcome as well
@@ -1449,7 +1449,6 @@ If you have any corrections and/or comments, please contact me.
 Hannu Savolainen
 hannu@opensound.com
 
-Personal home page:	   http://www.compusonic.fi/~hannu
 home page of OSS/Free: http://www.opensound.com/ossfree
 
 home page of commercial OSS