aboutsummaryrefslogtreecommitdiff
path: root/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2008-05-01 11:05:58 -0600
committerGrant Likely <grant.likely@secretlab.ca>2008-05-01 11:05:58 -0600
commit80791be11145f7dd7f68c84741fc66e5164b7353 (patch)
tree9794b484b7a92896aade75517d60dc60d00e86ba /Documentation/powerpc/mpc52xx-device-tree-bindings.txt
parenteabd90944b3a00766e84da3d117ea0f3e0a3b1a3 (diff)
[POWERPC] mpc5200: Allow for fixed speed MII configurations
Various improvements for configuring the MPC5200 MII link from the device tree: * Look for 'current-speed' property for fixed speed MII links * Look for 'fsl,7-wire-mode' property for boards using the 7 wire mode * move definition of private data structure out of the header file Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Diffstat (limited to 'Documentation/powerpc/mpc52xx-device-tree-bindings.txt')
-rw-r--r--Documentation/powerpc/mpc52xx-device-tree-bindings.txt11
1 files changed, 11 insertions, 0 deletions
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
index cda7a7dffa6..6f12f1c79c0 100644
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
@@ -237,6 +237,17 @@ Each GPIO controller node should have the empty property gpio-controller and
according to the bit numbers in the GPIO control registers. The second cell
is for flags which is currently unsused.
+8) FEC nodes
+The FEC node can specify one of the following properties to configure
+the MII link:
+"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
+ mode instead of MII
+"current-speed" - Specifies that the MII should be configured for a fixed
+ speed. This property should contain two cells. The
+ first cell specifies the speed in Mbps and the second
+ should be '0' for half duplex and '1' for full duplex
+"phy-handle" - Contains a phandle to an Ethernet PHY.
+
IV - Extra Notes
================