aboutsummaryrefslogtreecommitdiff
path: root/Documentation/powerpc/booting-without-of.txt
diff options
context:
space:
mode:
authorStephen Neuendorffer <stephen.neuendorffer@xilinx.com>2008-01-09 06:35:07 +1100
committerGrant Likely <grant.likely@secretlab.ca>2008-01-09 07:56:30 -0700
commitab99eee8ac902a0e176231447f318a0ed68f45d8 (patch)
tree404df81250ce8156cd601988584f00150da090b9 /Documentation/powerpc/booting-without-of.txt
parentfaa6511109026f1549619ebce972be00d1b921ce (diff)
[POWERPC] Xilinx: Update booting-without-of.
This now better describes what the UBoot device tree generator actually does. In particular: 1) Nodes have a label derived from the device name, and a node name derived from a generic version of the device type, e.g. 'ethernet', 'serial', etc. 2) Usage of compound nodes (representing more than one device in the same IP) which actually works. This requires having a valid compatible node, and all the other things that a bus normally has. I've chosen 'xlnx,compound' as the bus name to describe these compound nodes. In addition, I've clarified some of the language relating to how mhs nodes should be represent in the device tree. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'Documentation/powerpc/booting-without-of.txt')
-rw-r--r--Documentation/powerpc/booting-without-of.txt56
1 files changed, 33 insertions, 23 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index ee0209a7de3..a9e2d5ea9a0 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2292,7 +2292,7 @@ platforms are moved over to use the flattened-device-tree model.
properties of the device node. In general, device nodes for IP-cores
will take the following form:
- (name)@(base-address) {
+ (name): (generic-name)@(base-address) {
compatible = "xlnx,(ip-core-name)-(HW_VER)"
[, (list of compatible devices), ...];
reg = <(baseaddr) (size)>;
@@ -2302,6 +2302,9 @@ platforms are moved over to use the flattened-device-tree model.
xlnx,(parameter2) = <(int-value)>;
};
+ (generic-name): an open firmware-style name that describes the
+ generic class of device. Preferably, this is one word, such
+ as 'serial' or 'ethernet'.
(ip-core-name): the name of the ip block (given after the BEGIN
directive in system.mhs). Should be in lowercase
and all underscores '_' converted to dashes '-'.
@@ -2310,9 +2313,9 @@ platforms are moved over to use the flattened-device-tree model.
dropped from the parameter name, the name is converted
to lowercase and all underscore '_' characters are
converted to dashes '-'.
- (baseaddr): the C_BASEADDR parameter.
+ (baseaddr): the baseaddr parameter value (often named C_BASEADDR).
(HW_VER): from the HW_VER parameter.
- (size): equals C_HIGHADDR - C_BASEADDR + 1
+ (size): the address range size (often C_HIGHADDR - C_BASEADDR + 1).
Typically, the compatible list will include the exact IP core version
followed by an older IP core version which implements the same
@@ -2342,11 +2345,11 @@ platforms are moved over to use the flattened-device-tree model.
becomes the following device tree node:
- opb-uartlite-0@ec100000 {
+ opb_uartlite_0: serial@ec100000 {
device_type = "serial";
compatible = "xlnx,opb-uartlite-1.00.b";
reg = <ec100000 10000>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <1 0>; // got this from the opb_intc parameters
current-speed = <d#115200>; // standard serial device prop
clock-frequency = <d#50000000>; // standard serial device prop
@@ -2355,16 +2358,19 @@ platforms are moved over to use the flattened-device-tree model.
xlnx,use-parity = <0>;
};
- Some IP cores actually implement 2 or more logical devices. In this case,
- the device should still describe the whole IP core with a single node
- and add a child node for each logical device. The ranges property can
- be used to translate from parent IP-core to the registers of each device.
- (Note: this makes the assumption that both logical devices have the same
- bus binding. If this is not true, then separate nodes should be used for
- each logical device). The 'cell-index' property can be used to enumerate
- logical devices within an IP core. For example, the following is the
- system.mhs entry for the dual ps2 controller found on the ml403 reference
- design.
+ Some IP cores actually implement 2 or more logical devices. In
+ this case, the device should still describe the whole IP core with
+ a single node and add a child node for each logical device. The
+ ranges property can be used to translate from parent IP-core to the
+ registers of each device. In addition, the parent node should be
+ compatible with the bus type 'xlnx,compound', and should contain
+ #address-cells and #size-cells, as with any other bus. (Note: this
+ makes the assumption that both logical devices have the same bus
+ binding. If this is not true, then separate nodes should be used
+ for each logical device). The 'cell-index' property can be used to
+ enumerate logical devices within an IP core. For example, the
+ following is the system.mhs entry for the dual ps2 controller found
+ on the ml403 reference design.
BEGIN opb_ps2_dual_ref
PARAMETER INSTANCE = opb_ps2_dual_ref_0
@@ -2386,21 +2392,24 @@ platforms are moved over to use the flattened-device-tree model.
It would result in the following device tree nodes:
- opb_ps2_dual_ref_0@a9000000 {
+ opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
ranges = <0 a9000000 2000>;
// If this device had extra parameters, then they would
// go here.
ps2@0 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <0 40>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
ps2@1000 {
compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
reg = <1000 40>;
- interrupt-parent = <&opb-intc>;
+ interrupt-parent = <&opb_intc_0>;
interrupts = <3 0>;
cell-index = <0>;
};
@@ -2463,17 +2472,18 @@ platforms are moved over to use the flattened-device-tree model.
Gives this device tree (some properties removed for clarity):
- plb-v34-0 {
+ plb@0 {
#address-cells = <1>;
#size-cells = <1>;
+ compatible = "xlnx,plb-v34-1.02.a";
device_type = "ibm,plb";
ranges; // 1:1 translation
- plb-bram-if-cntrl-0@ffff0000 {
+ plb_bram_if_cntrl_0: bram@ffff0000 {
reg = <ffff0000 10000>;
}
- opb-v20-0 {
+ opb@20000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <20000000 20000000 20000000
@@ -2481,11 +2491,11 @@ platforms are moved over to use the flattened-device-tree model.
80000000 80000000 40000000
c0000000 c0000000 20000000>;
- opb-uart16550-0@a0000000 {
+ opb_uart16550_0: serial@a0000000 {
reg = <a00000000 2000>;
};
- opb-intc-0@d1000fc0 {
+ opb_intc_0: interrupt-controller@d1000fc0 {
reg = <d1000fc0 20>;
};
};