Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/stmmac/stmmac_main.c
	drivers/net/wireless/wl12xx/wl1271_cmd.c
	drivers/net/wireless/wl12xx/wl1271_main.c
	drivers/net/wireless/wl12xx/wl1271_spi.c
	net/core/ethtool.c
	net/mac80211/scan.c

1 files changed, 46 insertions, 30 deletions

diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index 0e58b453917..e8c8f4f06c6 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -41,11 +41,12 @@ SOF_TIMESTAMPING_SOFTWARE:     return system time stamp generated in
 SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
 SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
 following control message:
-    struct scm_timestamping {
-           struct timespec systime;
-           struct timespec hwtimetrans;
-           struct timespec hwtimeraw;
-    };
+
+struct scm_timestamping {
+	struct timespec systime;
+	struct timespec hwtimetrans;
+	struct timespec hwtimeraw;
+};
 
 recvmsg() can be used to get this control message for regular incoming
 packets. For send time stamps the outgoing packet is looped back to
@@ -87,12 +88,13 @@ by the network device and will be empty without that support.
 SIOCSHWTSTAMP:
 
 Hardware time stamping must also be initialized for each device driver
-that is expected to do hardware time stamping. The parameter is:
+that is expected to do hardware time stamping. The parameter is defined in
+/include/linux/net_tstamp.h as:
 
 struct hwtstamp_config {
-    int flags;           /* no flags defined right now, must be zero */
-    int tx_type;         /* HWTSTAMP_TX_* */
-    int rx_filter;       /* HWTSTAMP_FILTER_* */
+	int flags;	/* no flags defined right now, must be zero */
+	int tx_type;	/* HWTSTAMP_TX_* */
+	int rx_filter;	/* HWTSTAMP_FILTER_* */
 };
 
 Desired behavior is passed into the kernel and to a specific device by
@@ -139,42 +141,56 @@ enum {
 	/* time stamp any incoming packet */
 	HWTSTAMP_FILTER_ALL,
 
-        /* return value: time stamp all packets requested plus some others */
-        HWTSTAMP_FILTER_SOME,
+	/* return value: time stamp all packets requested plus some others */
+	HWTSTAMP_FILTER_SOME,
 
 	/* PTP v1, UDP, any kind of event packet */
 	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
 
-        ...
+	/* for the complete list of values, please check
+	 * the include file /include/linux/net_tstamp.h
+	 */
 };
 
 
 DEVICE IMPLEMENTATION
 
 A driver which supports hardware time stamping must support the
-SIOCSHWTSTAMP ioctl. Time stamps for received packets must be stored
-in the skb with skb_hwtstamp_set().
+SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with
+the actual values as described in the section on SIOCSHWTSTAMP.
+
+Time stamps for received packets must be stored in the skb. To get a pointer
+to the shared time stamp structure of the skb call skb_hwtstamps(). Then
+set the time stamps in the structure:
+
+struct skb_shared_hwtstamps {
+	/* hardware time stamp transformed into duration
+	 * since arbitrary point in time
+	 */
+	ktime_t	hwtstamp;
+	ktime_t	syststamp; /* hwtstamp transformed to system time base */
+};
 
 Time stamps for outgoing packets are to be generated as follows:
-- In hard_start_xmit(), check if skb_hwtstamp_check_tx_hardware()
-  returns non-zero. If yes, then the driver is expected
-  to do hardware time stamping.
+- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero.
+  If yes, then the driver is expected to do hardware time stamping.
 - If this is possible for the skb and requested, then declare
-  that the driver is doing the time stamping by calling
-  skb_hwtstamp_tx_in_progress(). A driver not supporting
-  hardware time stamping doesn't do that. A driver must never
-  touch sk_buff::tstamp! It is used to store how time stamping
-  for an outgoing packets is to be done.
+  that the driver is doing the time stamping by setting the field
+  skb_tx(skb)->in_progress non-zero. You might want to keep a pointer
+  to the associated skb for the next step and not free the skb. A driver
+  not supporting hardware time stamping doesn't do that. A driver must
+  never touch sk_buff::tstamp! It is used to store software generated
+  time stamps by the network subsystem.
 - As soon as the driver has sent the packet and/or obtained a
   hardware time stamp for it, it passes the time stamp back by
   calling skb_hwtstamp_tx() with the original skb, the raw
-  hardware time stamp and a handle to the device (necessary
-  to convert the hardware time stamp to system time). If obtaining
-  the hardware time stamp somehow fails, then the driver should
-  not fall back to software time stamping. The rationale is that
-  this would occur at a later time in the processing pipeline
-  than other software time stamping and therefore could lead
-  to unexpected deltas between time stamps.
-- If the driver did not call skb_hwtstamp_tx_in_progress(), then
+  hardware time stamp. skb_hwtstamp_tx() clones the original skb and
+  adds the timestamps, therefore the original skb has to be freed now.
+  If obtaining the hardware time stamp somehow fails, then the driver
+  should not fall back to software time stamping. The rationale is that
+  this would occur at a later time in the processing pipeline than other
+  software time stamping and therefore could lead to unexpected deltas
+  between time stamps.
+- If the driver did not call set skb_tx(skb)->in_progress, then
   dev_hard_start_xmit() checks whether software time stamping
   is wanted as fallback and potentially generates the time stamp.