Create/use more directory structure in the Documentation/ tree.

Create Documentation/blockdev/ sub-directory and populate it.
Populate the Documentation/serial/ sub-directory.
Move MSI-HOWTO.txt to Documentation/PCI/.
Move ioctl-number.txt to Documentation/ioctl/.
Update all relevant 00-INDEX files.
Update all relevant Kconfig files and source files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

1 files changed, 0 insertions, 523 deletions

diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio
deleted file mode 100644
index 5337e80a5b9..00000000000
--- a/Documentation/moxa-smartio
+++ /dev/null
@@ -1,523 +0,0 @@
-=============================================================================
-          MOXA Smartio/Industio Family Device Driver Installation Guide
-		    for Linux Kernel 2.4.x, 2.6.x
-	       Copyright (C) 2008, Moxa Inc.
-=============================================================================
-Date: 01/21/2008
-
-Content
-
-1. Introduction
-2. System Requirement
-3. Installation
-   3.1 Hardware installation
-   3.2 Driver files
-   3.3 Device naming convention
-   3.4 Module driver configuration
-   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
-   3.6 Custom configuration
-   3.7 Verify driver installation
-4. Utilities
-5. Setserial
-6. Troubleshooting
-
------------------------------------------------------------------------------
-1. Introduction
-
-   The Smartio/Industio/UPCI family Linux driver supports following multiport
-   boards.
-
-    - 2 ports multiport board
-	CP-102U, CP-102UL, CP-102UF
-	CP-132U-I, CP-132UL,
-	CP-132, CP-132I, CP132S, CP-132IS,
-	CI-132, CI-132I, CI-132IS,
-	(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
-
-    - 4 ports multiport board
-	CP-104EL,
-	CP-104UL, CP-104JU,
-	CP-134U, CP-134U-I,
-	C104H/PCI, C104HS/PCI,
-	CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
-	C104H, C104HS,
-	CI-104J, CI-104JS,
-	CI-134, CI-134I, CI-134IS,
-	(C114HI, CT-114I, C104P)
-	POS-104UL,
-	CB-114,
-	CB-134I
-
-    - 8 ports multiport board
-	CP-118EL, CP-168EL,
-	CP-118U, CP-168U,
-	C168H/PCI,
-	C168H, C168HS,
-	(C168P),
-	CB-108
-
-   This driver and installation procedure have been developed upon Linux Kernel
-   2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
-   to maintain compatibility, this version has also been properly tested with
-   RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
-   occurs, please contact Moxa at support@moxa.com.tw.
-
-   In addition to device driver, useful utilities are also provided in this
-   version. They are
-    - msdiag     Diagnostic program for displaying installed Moxa
-                 Smartio/Industio boards.
-    - msmon      Monitor program to observe data count and line status signals.
-    - msterm     A simple terminal program which is useful in testing serial
-	         ports.
-    - io-irq.exe Configuration program to setup ISA boards. Please note that
-                 this program can only be executed under DOS.
-
-   All the drivers and utilities are published in form of source code under
-   GNU General Public License in this version. Please refer to GNU General
-   Public License announcement in each source code file for more detail.
-
-   In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
-
-   This version of driver can be installed as Loadable Module (Module driver)
-   or built-in into kernel (Static driver). You may refer to following
-   installation procedure for suitable one. Before you install the driver,
-   please refer to hardware installation procedure in the User's Manual.
-
-   We assume the user should be familiar with following documents.
-   - Serial-HOWTO
-   - Kernel-HOWTO
-
------------------------------------------------------------------------------
-2. System Requirement
-   - Hardware platform: Intel x86 machine
-   - Kernel version: 2.4.x or 2.6.x
-   - gcc version 2.72 or later
-   - Maximum 4 boards can be installed in combination
-
------------------------------------------------------------------------------
-3. Installation
-
-   3.1 Hardware installation
-   3.2 Driver files
-   3.3 Device naming convention
-   3.4 Module driver configuration
-   3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x.
-   3.6 Custom configuration
-   3.7 Verify driver installation
-
-
-   3.1 Hardware installation
-
-       There are two types of buses, ISA and PCI, for Smartio/Industio
-       family multiport board.
-
-       ISA board
-       ---------
-       You'll have to configure CAP address, I/O address, Interrupt Vector
-       as well as IRQ before installing this driver. Please refer to hardware
-       installation procedure in User's Manual before proceed any further.
-       Please make sure the JP1 is open after the ISA board is set properly.
-
-       PCI/UPCI board
-       --------------
-       You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
-       with other ISA devices. Please refer to hardware installation
-       procedure in User's Manual in advance.
-
-       PCI IRQ Sharing
-       -----------
-       Each port within the same multiport board shares the same IRQ. Up to
-       4 Moxa Smartio/Industio PCI Family multiport boards can be installed
-       together on one system and they can share the same IRQ.
-
-
-   3.2 Driver files
-
-       The driver file may be obtained from ftp, CD-ROM or floppy disk. The
-       first step, anyway, is to copy driver file "mxser.tgz" into specified
-       directory. e.g. /moxa. The execute commands as below.
-
-       # cd /
-       # mkdir moxa
-       # cd /moxa
-       # tar xvf /dev/fd0
-
-       or
-
-       # cd /
-       # mkdir moxa
-       # cd /moxa
-       # cp /mnt/cdrom/<driver directory>/mxser.tgz .
-       # tar xvfz mxser.tgz
-
-
-   3.3 Device naming convention
-
-       You may find all the driver and utilities files in /moxa/mxser.
-       Following installation procedure depends on the model you'd like to
-       run the driver. If you prefer module driver, please refer to 3.4.
-       If static driver is required, please refer to 3.5.
-
-       Dialin and callout port
-       -----------------------
-       This driver remains traditional serial device properties. There are
-       two special file name for each serial port. One is dial-in port
-       which is named "ttyMxx". For callout port, the naming convention
-       is "cumxx".
-
-       Device naming when more than 2 boards installed
-       -----------------------------------------------
-       Naming convention for each Smartio/Industio multiport board is
-       pre-defined as below.
-
-       Board Num.	 Dial-in Port	      Callout port
-       1st board	ttyM0  - ttyM7	      cum0  - cum7
-       2nd board	ttyM8  - ttyM15       cum8  - cum15
-       3rd board	ttyM16 - ttyM23       cum16 - cum23
-       4th board	ttyM24 - ttym31       cum24 - cum31
-
-
-       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-       Under Kernel 2.6 the cum Device is Obsolete. So use ttyM*
-       device instead.
-       !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-       Board sequence
-       --------------
-       This driver will activate ISA boards according to the parameter set
-       in the driver. After all specified ISA board activated, PCI board
-       will be installed in the system automatically driven.
-       Therefore the board number is sorted by the CAP address of ISA boards.
-       For PCI boards, their sequence will be after ISA boards and C168H/PCI
-       has higher priority than C104H/PCI boards.
-
-   3.4 Module driver configuration
-       Module driver is easiest way to install. If you prefer static driver
-       installation, please skip this paragraph.
-
-
-       ------------- Prepare to use the MOXA driver--------------------
-       3.4.1 Create tty device with correct major number
-          Before using MOXA driver, your system must have the tty devices
-          which are created with driver's major number. We offer one shell
-          script "msmknod" to simplify the procedure.
-          This step is only needed to be executed once. But you still
-          need to do this procedure when:
-          a. You change the driver's major number. Please refer the "3.7"
-             section.
-          b. Your total installed MOXA boards number is changed. Maybe you
-             add/delete one MOXA board.
-          c. You want to change the tty name. This needs to modify the
-             shell script "msmknod"
-
-          The procedure is:
-	  # cd /moxa/mxser/driver
-	  # ./msmknod
-
-          This shell script will require the major number for dial-in
-          device and callout device to create tty device. You also need
-          to specify the total installed MOXA board number. Default major
-          numbers for dial-in device and callout device are 30, 35. If
-          you need to change to other number, please refer section "3.7"
-          for more detailed procedure.
-          Msmknod will delete any special files occupying the same device
-          naming.
-
-       3.4.2 Build the MOXA driver and utilities
-          Before using the MOXA driver and utilities, you need compile the
-          all the source code. This step is only need to be executed once.
-          But you still re-compile the source code if you modify the source
-          code. For example, if you change the driver's major number (see
-          "3.7" section), then you need to do this step again.
-
-          Find "Makefile" in /moxa/mxser, then run
-
-	  # make clean; make install
-
-          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
-	  For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
-	  # make clean; make installsp1
-
-	  For Red Hat Enterprise Linux AS4/ES4/WS4:
-	  # make clean; make installsp2
-          !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
-
-	  The driver files "mxser.o" and utilities will be properly compiled
-	  and copied to system directories respectively.
-
-       ------------- Load MOXA driver--------------------
-       3.4.3 Load the MOXA driver
-
-	  # modprobe mxser <argument>
-
-	  will activate the module driver. You may run "lsmod" to check
-	  if "mxser" is activated. If the MOXA board is ISA board, the
-          <argument> is needed. Please refer to section "3.4.5" for more
-          information.
-
-
-       ------------- Load MOXA driver on boot --------------------
-       3.4.4 For the above description, you may manually execute
-          "modprobe mxser" to activate this driver and run
-	  "rmmod mxser" to remove it.
-          However, it's better to have a boot time configuration to
-          eliminate manual operation. Boot time configuration can be
-          achieved by rc file. We offer one "rc.mxser" file to simplify
-          the procedure under "moxa/mxser/driver".
-
-          But if you use ISA board, please modify the "modprobe ..." command
-          to add the argument (see "3.4.5" section). After modifying the
-          rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
-          manually to make sure the modification is ok. If any error
-          encountered, please try to modify again. If the modification is
-          completed, follow the below step.
-
-	  Run following command for setting rc files.
-
-	  # cd /moxa/mxser/driver
-	  # cp ./rc.mxser /etc/rc.d
-	  # cd /etc/rc.d
-
-	  Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
-	  create it by vi, run "chmod 755 rc.serial" to change the permission.
-	  Add "/etc/rc.d/rc.mxser" in last line,
-
-          Reboot and check if moxa.o activated by "lsmod" command.
-
-       3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system,
-          you'll have to add parameter to specify CAP address of given
-	  board while activating "mxser.o". The format for parameters are
-	  as follows.
-
-	  modprobe mxser ioaddr=0x???,0x???,0x???,0x???
-				|      |     |	  |
-				|      |     |	  +- 4th ISA board
-				|      |     +------ 3rd ISA board
-				|      +------------ 2nd ISA board
-				+------------------- 1st ISA board
-
-   3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
-
-       Note: To use static driver, you must install the linux kernel
-             source package.
-
-       3.5.1 Backup the built-in driver in the kernel.
-          # cd /usr/src/linux/drivers/char
-          # mv mxser.c mxser.c.old
-
-          For Red Hat 7.x user, you need to create link:
-          # cd /usr/src
-          # ln -s linux-2.4 linux
-
-       3.5.2 Create link
-	  # cd /usr/src/linux/drivers/char
-	  # ln -s /moxa/mxser/driver/mxser.c mxser.c
-
-       3.5.3 Add CAP address list for ISA boards. For PCI boards user,
-          please skip this step.
-
-	  In module mode, the CAP address for ISA board is given by
-	  parameter. In static driver configuration, you'll have to
-	  assign it within driver's source code. If you will not
-	  install any ISA boards, you may skip to next portion.
-	  The instructions to modify driver source code are as
-	  below.
-	  a. # cd /moxa/mxser/driver
-	     # vi mxser.c
-	  b. Find the array mxserBoardCAP[] as below.
-
-	     static int mxserBoardCAP[]
-	     = {0x00, 0x00, 0x00, 0x00};
-
-	  c. Change the address within this array using vi. For
-	     example, to driver 2 ISA boards with CAP address
-	     0x280 and 0x180 as 1st and 2nd board. Just to change
-	     the source code as follows.
-
-	     static int mxserBoardCAP[]
-	     = {0x280, 0x180, 0x00, 0x00};
-
-       3.5.4 Setup kernel configuration
-
-          Configure the kernel:
-
-            # cd /usr/src/linux
-            # make menuconfig
-
-          You will go into a menu-driven system. Please select [Character
-          devices][Non-standard serial port support], enable the [Moxa
-          SmartIO support] driver with "[*]" for built-in (not "[M]"), then
-          select [Exit] to exit this program.
-
-       3.5.5 Rebuild kernel
-	  The following are for Linux kernel rebuilding, for your
-          reference only.
-	  For appropriate details, please refer to the Linux document.
-
-	   a. cd /usr/src/linux
-	   b. make clean	     /* take a few minutes */
-	   c. make dep		     /* take a few minutes */
-	   d. make bzImage	     /* take probably 10-20 minutes */
-	   e. make install	     /* copy boot image to correct position */
-	   f. Please make sure the boot kernel (vmlinuz) is in the
-	      correct position.
-	   g. If you use 'lilo' utility, you should check /etc/lilo.conf
-	      'image' item specified the path which is the 'vmlinuz' path,
-	      or you will load wrong (or old) boot kernel image (vmlinuz).
-	      After checking /etc/lilo.conf, please run "lilo".
-
-	  Note that if the result of "make bzImage" is ERROR, then you have to
-	  go back to Linux configuration Setup. Type "make menuconfig" in
-          directory /usr/src/linux.
-
-
-       3.5.6 Make tty device and special file
-          # cd /moxa/mxser/driver
-          # ./msmknod
-
-       3.5.7 Make utility
-	  # cd /moxa/mxser/utility
-	  # make clean; make install
-
-       3.5.8 Reboot
-
-
-
-   3.6 Custom configuration
-       Although this driver already provides you default configuration, you
-       still can change the device name and major number. The instruction to
-       change these parameters are shown as below.
-
-       Change Device name
-       ------------------
-       If you'd like to use other device names instead of default naming
-       convention, all you have to do is to modify the internal code
-       within the shell script "msmknod". First, you have to open "msmknod"
-       by vi. Locate each line contains "ttyM" and "cum" and change them
-       to the device name you desired. "msmknod" creates the device names
-       you need next time executed.
-
-       Change Major number
-       -------------------
-       If major number 30 and 35 had been occupied, you may have to select
-       2 free major numbers for this driver. There are 3 steps to change
-       major numbers.
-
-       3.6.1 Find free major numbers
-	  In /proc/devices, you may find all the major numbers occupied
-	  in the system. Please select 2 major numbers that are available.
-	  e.g. 40, 45.
-       3.6.2 Create special files
-	  Run /moxa/mxser/driver/msmknod to create special files with
-	  specified major numbers.
-       3.6.3 Modify driver with new major number
-	  Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
-	  contains "MXSERMAJOR". Change the content as below.
-	  #define	  MXSERMAJOR		  40
-	  #define	  MXSERCUMAJOR		  45
-       3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
-
-   3.7 Verify driver installation
-       You may refer to /var/log/messages to check the latest status
-       log reported by this driver whenever it's activated.
-
------------------------------------------------------------------------------
-4. Utilities
-   There are 3 utilities contained in this driver. They are msdiag, msmon and
-   msterm. These 3 utilities are released in form of source code. They should
-   be compiled into executable file and copied into /usr/bin.
-
-   Before using these utilities, please load driver (refer 3.4 & 3.5) and
-   make sure you had run the "msmknod" utility.
-
-   msdiag - Diagnostic
-   --------------------
-   This utility provides the function to display what Moxa Smartio/Industio
-   board found by driver in the system.
-
-   msmon - Port Monitoring
-   -----------------------
-   This utility gives the user a quick view about all the MOXA ports'
-   activities. One can easily learn each port's total received/transmitted
-   (Rx/Tx) character count since the time when the monitoring is started.
-   Rx/Tx throughputs per second are also reported in interval basis (e.g.
-   the last 5 seconds) and in average basis (since the time the monitoring
-   is started). You can reset all ports' count by <HOME> key. <+> <->
-   (plus/minus) keys to change the displaying time interval. Press <ENTER>
-   on the port, that cursor stay, to view the port's communication
-   parameters, signal status, and input/output queue.
-
-   msterm - Terminal Emulation
-   ---------------------------
-   This utility provides data sending and receiving ability of all tty ports,
-   especially for MOXA ports. It is quite useful for testing simple
-   application, for example, sending AT command to a modem connected to the
-   port or used as a terminal for login purpose. Note that this is only a
-   dumb terminal emulation without handling full screen operation.
-
------------------------------------------------------------------------------
-5. Setserial
-
-   Supported Setserial parameters are listed as below.
-
-   uart		  set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
-   close_delay	  set the amount of time(in 1/100 of a second) that DTR
-		  should be kept low while being closed.
-   closing_wait   set the amount of time(in 1/100 of a second) that the
-		  serial port should wait for data to be drained while
-		  being closed, before the receiver is disable.
-   spd_hi	  Use  57.6kb  when  the application requests 38.4kb.
-   spd_vhi	  Use  115.2kb	when  the application requests 38.4kb.
-   spd_shi	  Use  230.4kb	when  the application requests 38.4kb.
-   spd_warp	  Use  460.8kb	when  the application requests 38.4kb.
-   spd_normal	  Use  38.4kb  when  the application requests 38.4kb.
-   spd_cust	  Use  the custom divisor to set the speed when  the
-		  application requests 38.4kb.
-   divisor	  This option set the custom divison.
-   baud_base	  This option set the base baud rate.
-
------------------------------------------------------------------------------
-6. Troubleshooting
-
-   The boot time error messages and solutions are stated as clearly as
-   possible. If all the possible solutions fail, please contact our technical
-   support team to get more help.
-
-
-   Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board
-              and after are ignored.
-   Solution:
-   To avoid this problem, please unplug fifth and after board, because Moxa
-   driver supports up to 4 boards.
-
-   Error msg: Request_irq fail, IRQ(?) may be conflict with another device.
-   Solution:
-   Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
-   which device causes the situation, please check /proc/interrupts to find
-   free IRQ and simply change another free IRQ for Moxa board.
-
-   Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid.
-   Solution:
-   Each port within the same multiport board shares the same IRQ. Please set
-   one IRQ (IRQ doesn't equal to zero) for one Moxa board.
-
-   Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx).
-   Solution:
-   Moxa ISA board needs an interrupt vector.Please refer to user's manual
-   "Hardware Installation" chapter to set interrupt vector.
-
-   Error msg: Couldn't install MOXA Smartio/Industio family driver!
-   Solution:
-   Load Moxa driver fail, the major number may conflict with other devices.
-   Please refer to previous section 3.7 to change a free major number for
-   Moxa driver.
-
-   Error msg: Couldn't install MOXA Smartio/Industio family callout driver!
-   Solution:
-   Load Moxa callout driver fail, the callout device major number may
-   conflict with other devices. Please refer to previous section 3.7 to
-   change a free callout device major number for Moxa driver.
-
-
------------------------------------------------------------------------------
-