Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 60 insertions, 0 deletions

diff --git a/Documentation/memory.txt b/Documentation/memory.txt
new file mode 100644
index 00000000000..2b3dedd3953
--- /dev/null
+++ b/Documentation/memory.txt
@@ -0,0 +1,60 @@
+There are several classic problems related to memory on Linux
+systems.
+
+	1) There are some buggy motherboards which cannot properly 
+	   deal with the memory above 16MB.  Consider exchanging
+	   your motherboard.
+
+	2) You cannot do DMA on the ISA bus to addresses above
+	   16M.  Most device drivers under Linux allow the use
+           of bounce buffers which work around this problem.  Drivers
+	   that don't use bounce buffers will be unstable with
+	   more than 16M installed.  Drivers that use bounce buffers
+	   will be OK, but may have slightly higher overhead.
+	
+	3) There are some motherboards that will not cache above
+	   a certain quantity of memory.  If you have one of these
+	   motherboards, your system will be SLOWER, not faster
+	   as you add more memory.  Consider exchanging your 
+           motherboard.
+
+All of these problems can be addressed with the "mem=XXXM" boot option
+(where XXX is the size of RAM to use in megabytes).  
+It can also tell Linux to use less memory than is actually installed.
+If you use "mem=" on a machine with PCI, consider using "memmap=" to avoid
+physical address space collisions.
+
+See the documentation of your boot loader (LILO, loadlin, etc.) about
+how to pass options to the kernel.
+
+There are other memory problems which Linux cannot deal with.  Random
+corruption of memory is usually a sign of serious hardware trouble.
+Try:
+
+	* Reducing memory settings in the BIOS to the most conservative 
+          timings.
+
+	* Adding a cooling fan.
+
+	* Not overclocking your CPU.
+
+	* Having the memory tested in a memory tester or exchanged
+	  with the vendor. Consider testing it with memtest86 yourself.
+	
+	* Exchanging your CPU, cache, or motherboard for one that works.
+
+	* Disabling the cache from the BIOS.
+
+	* Try passing the "mem=4M" option to the kernel to limit
+	  Linux to using a very small amount of memory. Use "memmap="-option
+	  together with "mem=" on systems with PCI to avoid physical address
+	  space collisions.
+
+
+Other tricks:
+
+	* Try passing the "no-387" option to the kernel to ignore
+	  a buggy FPU.
+
+	* Try passing the "no-hlt" option to disable the potentially
+          buggy HLT instruction in your CPU.