Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/firmware/iscsi_ibft.c

1 files changed, 33 insertions, 2 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 3ca7f8f5652..fbcddc5abe2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -200,6 +200,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			acpi_display_output=video
 			See above.
 
+	acpi_early_pdc_eval	[HW,ACPI] Evaluate processor _PDC methods
+				early. Needed on some platforms to properly
+				initialize the EC.
+
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode
@@ -312,6 +316,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
+	alignment=	[KNL,ARM]
+			Allow the default userspace alignment fault handler
+			behaviour to be specified.  Bit 0 enables warnings,
+			bit 1 enables fixups, and bit 2 sends a segfault.
+
 	amd_iommu=	[HW,X86-84]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:
@@ -1739,6 +1748,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	nomfgpt		[X86-32] Disable Multi-Function General Purpose
 			Timer usage (for AMD Geode machines).
 
+	nopat		[X86] Disable PAT (page attribute table extension of
+			pagetables) support.
+
 	norandmaps	Don't use address space randomization.  Equivalent to
 			echo 0 > /proc/sys/kernel/randomize_va_space
 
@@ -1949,8 +1961,12 @@ and is between 256 and 4096 characters. It is defined in the file
 				IRQ routing is enabled.
 		noacpi		[X86] Do not use ACPI for IRQ routing
 				or for PCI scanning.
-		use_crs		[X86] Use _CRS for PCI resource
-				allocation.
+		use_crs		[X86] Use PCI host bridge window information
+				from ACPI.  On BIOSes from 2008 or later, this
+				is enabled by default.  If you need to use this,
+				please report a bug.
+		nocrs		[X86] Ignore PCI host bridge windows from ACPI.
+			        If you need to use this, please report a bug.
 		routeirq	Do IRQ routing for all PCI devices.
 				This is normally done in pci_enable_device(),
 				so this option is a temporary workaround
@@ -1999,6 +2015,14 @@ and is between 256 and 4096 characters. It is defined in the file
 		force	Enable ASPM even on devices that claim not to support it.
 			WARNING: Forcing ASPM on may cause system lockups.
 
+	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
+		off	Do not use native PCIe PME signaling.
+		force	Use native PCIe PME signaling even if the BIOS refuses
+			to allow the kernel to control the relevant PCIe config
+			registers.
+		nomsi	Do not use MSI for native PCIe PME signaling (this makes
+			all PCIe root ports use INTx for everything).
+
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
 	pd.		[PARIDE]
@@ -2704,6 +2728,13 @@ and is between 256 and 4096 characters. It is defined in the file
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
+	userpte=
+			[X86] Flags controlling user PTE allocations.
+
+				nohigh = do not allocate PTE pages in
+					HIGHMEM regardless of setting
+					of CONFIG_HIGHPTE.
+
 	vdso=		[X86,SH]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)