Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 34 insertions, 0 deletions

diff --git a/Documentation/i2c/busses/i2c-via b/Documentation/i2c/busses/i2c-via
new file mode 100644
index 00000000000..55edfe1a640
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-via
@@ -0,0 +1,34 @@
+Kernel driver i2c-via
+
+Supported adapters:
+  * VIA Technologies, InC. VT82C586B
+    Datasheet: Publicly available at the VIA website
+
+Author: Kyösti Mälkki <kmalkki@cc.hut.fi>
+
+Description
+-----------
+
+i2c-via is an i2c bus driver for motherboards with VIA chipset.
+
+The following VIA pci chipsets are supported:
+ - MVP3, VP3, VP2/97, VPX/97 
+ - others with South bridge VT82C586B
+
+Your lspci listing must show this :
+
+ Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
+
+    Problems?
+ 
+ Q: You have VT82C586B on the motherboard, but not in the listing. 
+ 
+ A: Go to your BIOS setup, section PCI devices or similar.
+    Turn USB support on, and try again. 
+
+ Q: No error messages, but still i2c doesn't seem to work.
+
+ A: This can happen. This driver uses the pins VIA recommends in their
+    datasheets, but there are several ways the motherboard manufacturer
+    can actually wire the lines.
+