[PATCH] configfs: User-driven configuration filesystem

Configfs, a file system for userspace-driven kernel object configuration.
The OCFS2 stack makes extensive use of this for propagation of cluster
configuration information into kernel.

Signed-off-by: Joel Becker <joel.becker@oracle.com>

2 files changed, 908 insertions, 0 deletions

diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
new file mode 100644
index 00000000000..c4ff96b7c4e
--- /dev/null
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -0,0 +1,434 @@
+
+configfs - Userspace-driven kernel object configuation.
+
+Joel Becker <joel.becker@oracle.com>
+
+Updated: 31 March 2005
+
+Copyright (c) 2005 Oracle Corporation,
+	Joel Becker <joel.becker@oracle.com>
+
+
+[What is configfs?]
+
+configfs is a ram-based filesystem that provides the converse of
+sysfs's functionality.  Where sysfs is a filesystem-based view of
+kernel objects, configfs is a filesystem-based manager of kernel
+objects, or config_items.
+
+With sysfs, an object is created in kernel (for example, when a device
+is discovered) and it is registered with sysfs.  Its attributes then
+appear in sysfs, allowing userspace to read the attributes via
+readdir(3)/read(2).  It may allow some attributes to be modified via
+write(2).  The important point is that the object is created and
+destroyed in kernel, the kernel controls the lifecycle of the sysfs
+representation, and sysfs is merely a window on all this.
+
+A configfs config_item is created via an explicit userspace operation:
+mkdir(2).  It is destroyed via rmdir(2).  The attributes appear at
+mkdir(2) time, and can be read or modified via read(2) and write(2).
+As with sysfs, readdir(3) queries the list of items and/or attributes.
+symlink(2) can be used to group items together.  Unlike sysfs, the
+lifetime of the representation is completely driven by userspace.  The
+kernel modules backing the items must respond to this.
+
+Both sysfs and configfs can and should exist together on the same
+system.  One is not a replacement for the other.
+
+[Using configfs]
+
+configfs can be compiled as a module or into the kernel.  You can access
+it by doing
+
+	mount -t configfs none /config
+
+The configfs tree will be empty unless client modules are also loaded.
+These are modules that register their item types with configfs as
+subsystems.  Once a client subsystem is loaded, it will appear as a
+subdirectory (or more than one) under /config.  Like sysfs, the
+configfs tree is always there, whether mounted on /config or not.
+
+An item is created via mkdir(2).  The item's attributes will also
+appear at this time.  readdir(3) can determine what the attributes are,
+read(2) can query their default values, and write(2) can store new
+values.  Like sysfs, attributes should be ASCII text files, preferably
+with only one value per file.  The same efficiency caveats from sysfs
+apply.  Don't mix more than one attribute in one attribute file.
+
+Like sysfs, configfs expects write(2) to store the entire buffer at
+once.  When writing to configfs attributes, userspace processes should
+first read the entire file, modify the portions they wish to change, and
+then write the entire buffer back.  Attribute files have a maximum size
+of one page (PAGE_SIZE, 4096 on i386).
+
+When an item needs to be destroyed, remove it with rmdir(2).  An
+item cannot be destroyed if any other item has a link to it (via
+symlink(2)).  Links can be removed via unlink(2).
+
+[Configuring FakeNBD: an Example]
+
+Imagine there's a Network Block Device (NBD) driver that allows you to
+access remote block devices.  Call it FakeNBD.  FakeNBD uses configfs
+for its configuration.  Obviously, there will be a nice program that
+sysadmins use to configure FakeNBD, but somehow that program has to tell
+the driver about it.  Here's where configfs comes in.
+
+When the FakeNBD driver is loaded, it registers itself with configfs.
+readdir(3) sees this just fine:
+
+	# ls /config
+	fakenbd
+
+A fakenbd connection can be created with mkdir(2).  The name is
+arbitrary, but likely the tool will make some use of the name.  Perhaps
+it is a uuid or a disk name:
+
+	# mkdir /config/fakenbd/disk1
+	# ls /config/fakenbd/disk1
+	target device rw
+
+The target attribute contains the IP address of the server FakeNBD will
+connect to.  The device attribute is the device on the server.
+Predictably, the rw attribute determines whether the connection is
+read-only or read-write.
+
+	# echo 10.0.0.1 > /config/fakenbd/disk1/target
+	# echo /dev/sda1 > /config/fakenbd/disk1/device
+	# echo 1 > /config/fakenbd/disk1/rw
+
+That's it.  That's all there is.  Now the device is configured, via the
+shell no less.
+
+[Coding With configfs]
+
+Every object in configfs is a config_item.  A config_item reflects an
+object in the subsystem.  It has attributes that match values on that
+object.  configfs handles the filesystem representation of that object
+and its attributes, allowing the subsystem to ignore all but the
+basic show/store interaction.
+
+Items are created and destroyed inside a config_group.  A group is a
+collection of items that share the same attributes and operations.
+Items are created by mkdir(2) and removed by rmdir(2), but configfs
+handles that.  The group has a set of operations to perform these tasks
+
+A subsystem is the top level of a client module.  During initialization,
+the client module registers the subsystem with configfs, the subsystem
+appears as a directory at the top of the configfs filesystem.  A
+subsystem is also a config_group, and can do everything a config_group
+can.
+
+[struct config_item]
+
+	struct config_item {
+		char                    *ci_name;
+		char                    ci_namebuf[UOBJ_NAME_LEN];
+		struct kref             ci_kref;
+		struct list_head        ci_entry;
+		struct config_item      *ci_parent;
+		struct config_group     *ci_group;
+		struct config_item_type *ci_type;
+		struct dentry           *ci_dentry;
+	};
+
+	void config_item_init(struct config_item *);
+	void config_item_init_type_name(struct config_item *,
+					const char *name,
+					struct config_item_type *type);
+	struct config_item *config_item_get(struct config_item *);
+	void config_item_put(struct config_item *);
+
+Generally, struct config_item is embedded in a container structure, a
+structure that actually represents what the subsystem is doing.  The
+config_item portion of that structure is how the object interacts with
+configfs.
+
+Whether statically defined in a source file or created by a parent
+config_group, a config_item must have one of the _init() functions
+called on it.  This initializes the reference count and sets up the
+appropriate fields.
+
+All users of a config_item should have a reference on it via
+config_item_get(), and drop the reference when they are done via
+config_item_put().
+
+By itself, a config_item cannot do much more than appear in configfs.
+Usually a subsystem wants the item to display and/or store attributes,
+among other things.  For that, it needs a type.
+
+[struct config_item_type]
+
+	struct configfs_item_operations {
+		void (*release)(struct config_item *);
+		ssize_t (*show_attribute)(struct config_item *,
+					  struct configfs_attribute *,
+					  char *);
+		ssize_t (*store_attribute)(struct config_item *,
+					   struct configfs_attribute *,
+					   const char *, size_t);
+		int (*allow_link)(struct config_item *src,
+				  struct config_item *target);
+		int (*drop_link)(struct config_item *src,
+				 struct config_item *target);
+	};
+
+	struct config_item_type {
+		struct module                           *ct_owner;
+		struct configfs_item_operations         *ct_item_ops;
+		struct configfs_group_operations        *ct_group_ops;
+		struct configfs_attribute               **ct_attrs;
+	};
+
+The most basic function of a config_item_type is to define what
+operations can be performed on a config_item.  All items that have been
+allocated dynamically will need to provide the ct_item_ops->release()
+method.  This method is called when the config_item's reference count
+reaches zero.  Items that wish to display an attribute need to provide
+the ct_item_ops->show_attribute() method.  Similarly, storing a new
+attribute value uses the store_attribute() method.
+
+[struct configfs_attribute]
+
+	struct configfs_attribute {
+		char                    *ca_name;
+		struct module           *ca_owner;
+		mode_t                  ca_mode;
+	};
+
+When a config_item wants an attribute to appear as a file in the item's
+configfs directory, it must define a configfs_attribute describing it.
+It then adds the attribute to the NULL-terminated array
+config_item_type->ct_attrs.  When the item appears in configfs, the
+attribute file will appear with the configfs_attribute->ca_name
+filename.  configfs_attribute->ca_mode specifies the file permissions.
+
+If an attribute is readable and the config_item provides a
+ct_item_ops->show_attribute() method, that method will be called
+whenever userspace asks for a read(2) on the attribute.  The converse
+will happen for write(2).
+
+[struct config_group]
+
+A config_item cannot live in a vaccum.  The only way one can be created
+is via mkdir(2) on a config_group.  This will trigger creation of a
+child item.
+
+	struct config_group {
+		struct config_item		cg_item;
+		struct list_head		cg_children;
+		struct configfs_subsystem 	*cg_subsys;
+		struct config_group		**default_groups;
+	};
+
+	void config_group_init(struct config_group *group);
+	void config_group_init_type_name(struct config_group *group,
+					 const char *name,
+					 struct config_item_type *type);
+
+
+The config_group structure contains a config_item.  Properly configuring
+that item means that a group can behave as an item in its own right.
+However, it can do more: it can create child items or groups.  This is
+accomplished via the group operations specified on the group's
+config_item_type.
+
+	struct configfs_group_operations {
+		struct config_item *(*make_item)(struct config_group *group,
+						 const char *name);
+		struct config_group *(*make_group)(struct config_group *group,
+						   const char *name);
+		int (*commit_item)(struct config_item *item);
+		void (*drop_item)(struct config_group *group,
+				  struct config_item *item);
+	};
+
+A group creates child items by providing the
+ct_group_ops->make_item() method.  If provided, this method is called from mkdir(2) in the group's directory.  The subsystem allocates a new
+config_item (or more likely, its container structure), initializes it,
+and returns it to configfs.  Configfs will then populate the filesystem
+tree to reflect the new item.
+
+If the subsystem wants the child to be a group itself, the subsystem
+provides ct_group_ops->make_group().  Everything else behaves the same,
+using the group _init() functions on the group.
+
+Finally, when userspace calls rmdir(2) on the item or group,
+ct_group_ops->drop_item() is called.  As a config_group is also a
+config_item, it is not necessary for a seperate drop_group() method.
+The subsystem must config_item_put() the reference that was initialized
+upon item allocation.  If a subsystem has no work to do, it may omit
+the ct_group_ops->drop_item() method, and configfs will call
+config_item_put() on the item on behalf of the subsystem.
+
+IMPORTANT: drop_item() is void, and as such cannot fail.  When rmdir(2)
+is called, configfs WILL remove the item from the filesystem tree
+(assuming that it has no children to keep it busy).  The subsystem is
+responsible for responding to this.  If the subsystem has references to
+the item in other threads, the memory is safe.  It may take some time
+for the item to actually disappear from the subsystem's usage.  But it
+is gone from configfs.
+
+A config_group cannot be removed while it still has child items.  This
+is implemented in the configfs rmdir(2) code.  ->drop_item() will not be
+called, as the item has not been dropped.  rmdir(2) will fail, as the
+directory is not empty.
+
+[struct configfs_subsystem]
+
+A subsystem must register itself, ususally at module_init time.  This
+tells configfs to make the subsystem appear in the file tree.
+
+	struct configfs_subsystem {
+		struct config_group	su_group;
+		struct semaphore	su_sem;
+	};
+
+	int configfs_register_subsystem(struct configfs_subsystem *subsys);
+	void configfs_unregister_subsystem(struct configfs_subsystem *subsys);
+
+	A subsystem consists of a toplevel config_group and a semaphore.
+The group is where child config_items are created.  For a subsystem,
+this group is usually defined statically.  Before calling
+configfs_register_subsystem(), the subsystem must have initialized the
+group via the usual group _init() functions, and it must also have
+initialized the semaphore.
+	When the register call returns, the subsystem is live, and it
+will be visible via configfs.  At that point, mkdir(2) can be called and
+the subsystem must be ready for it.
+
+[An Example]
+
+The best example of these basic concepts is the simple_children
+subsystem/group and the simple_child item in configfs_example.c  It
+shows a trivial object displaying and storing an attribute, and a simple
+group creating and destroying these children.
+
+[Hierarchy Navigation and the Subsystem Semaphore]
+
+There is an extra bonus that configfs provides.  The config_groups and
+config_items are arranged in a hierarchy due to the fact that they
+appear in a filesystem.  A subsystem is NEVER to touch the filesystem
+parts, but the subsystem might be interested in this hierarchy.  For
+this reason, the hierarchy is mirrored via the config_group->cg_children
+and config_item->ci_parent structure members.
+
+A subsystem can navigate the cg_children list and the ci_parent pointer
+to see the tree created by the subsystem.  This can race with configfs'
+management of the hierarchy, so configfs uses the subsystem semaphore to
+protect modifications.  Whenever a subsystem wants to navigate the
+hierarchy, it must do so under the protection of the subsystem
+semaphore.
+
+A subsystem will be prevented from acquiring the semaphore while a newly
+allocated item has not been linked into this hierarchy.   Similarly, it
+will not be able to acquire the semaphore while a dropping item has not
+yet been unlinked.  This means that an item's ci_parent pointer will
+never be NULL while the item is in configfs, and that an item will only
+be in its parent's cg_children list for the same duration.  This allows
+a subsystem to trust ci_parent and cg_children while they hold the
+semaphore.
+
+[Item Aggregation Via symlink(2)]
+
+configfs provides a simple group via the group->item parent/child
+relationship.  Often, however, a larger environment requires aggregation
+outside of the parent/child connection.  This is implemented via
+symlink(2).
+
+A config_item may provide the ct_item_ops->allow_link() and
+ct_item_ops->drop_link() methods.  If the ->allow_link() method exists,
+symlink(2) may be called with the config_item as the source of the link.
+These links are only allowed between configfs config_items.  Any
+symlink(2) attempt outside the configfs filesystem will be denied.
+
+When symlink(2) is called, the source config_item's ->allow_link()
+method is called with itself and a target item.  If the source item
+allows linking to target item, it returns 0.  A source item may wish to
+reject a link if it only wants links to a certain type of object (say,
+in its own subsystem).
+
+When unlink(2) is called on the symbolic link, the source item is
+notified via the ->drop_link() method.  Like the ->drop_item() method,
+this is a void function and cannot return failure.  The subsystem is
+responsible for responding to the change.
+
+A config_item cannot be removed while it links to any other item, nor
+can it be removed while an item links to it.  Dangling symlinks are not
+allowed in configfs.
+
+[Automatically Created Subgroups]
+
+A new config_group may want to have two types of child config_items.
+While this could be codified by magic names in ->make_item(), it is much
+more explicit to have a method whereby userspace sees this divergence.
+
+Rather than have a group where some items behave differently than
+others, configfs provides a method whereby one or many subgroups are
+automatically created inside the parent at its creation.  Thus,
+mkdir("parent) results in "parent", "parent/subgroup1", up through
+"parent/subgroupN".  Items of type 1 can now be created in
+"parent/subgroup1", and items of type N can be created in
+"parent/subgroupN".
+
+These automatic subgroups, or default groups, do not preclude other
+children of the parent group.  If ct_group_ops->make_group() exists,
+other child groups can be created on the parent group directly.
+
+A configfs subsystem specifies default groups by filling in the
+NULL-terminated array default_groups on the config_group structure.
+Each group in that array is populated in the configfs tree at the same
+time as the parent group.  Similarly, they are removed at the same time
+as the parent.  No extra notification is provided.  When a ->drop_item()
+method call notifies the subsystem the parent group is going away, it
+also means every default group child associated with that parent group.
+
+As a consequence of this, default_groups cannot be removed directly via
+rmdir(2).  They also are not considered when rmdir(2) on the parent
+group is checking for children.
+
+[Committable Items]
+
+NOTE: Committable items are currently unimplemented.
+
+Some config_items cannot have a valid initial state.  That is, no
+default values can be specified for the item's attributes such that the
+item can do its work.  Userspace must configure one or more attributes,
+after which the subsystem can start whatever entity this item
+represents.
+
+Consider the FakeNBD device from above.  Without a target address *and*
+a target device, the subsystem has no idea what block device to import.
+The simple example assumes that the subsystem merely waits until all the
+appropriate attributes are configured, and then connects.  This will,
+indeed, work, but now every attribute store must check if the attributes
+are initialized.  Every attribute store must fire off the connection if
+that condition is met.
+
+Far better would be an explicit action notifying the subsystem that the
+config_item is ready to go.  More importantly, an explicit action allows
+the subsystem to provide feedback as to whether the attibutes are
+initialized in a way that makes sense.  configfs provides this as
+committable items.
+
+configfs still uses only normal filesystem operations.  An item is
+committed via rename(2).  The item is moved from a directory where it
+can be modified to a directory where it cannot.
+
+Any group that provides the ct_group_ops->commit_item() method has
+committable items.  When this group appears in configfs, mkdir(2) will
+not work directly in the group.  Instead, the group will have two
+subdirectories: "live" and "pending".  The "live" directory does not
+support mkdir(2) or rmdir(2) either.  It only allows rename(2).  The
+"pending" directory does allow mkdir(2) and rmdir(2).  An item is
+created in the "pending" directory.  Its attributes can be modified at
+will.  Userspace commits the item by renaming it into the "live"
+directory.  At this point, the subsystem recieves the ->commit_item()
+callback.  If all required attributes are filled to satisfaction, the
+method returns zero and the item is moved to the "live" directory.
+
+As rmdir(2) does not work in the "live" directory, an item must be
+shutdown, or "uncommitted".  Again, this is done via rename(2), this
+time from the "live" directory back to the "pending" one.  The subsystem
+is notified by the ct_group_ops->uncommit_object() method.
+
+
diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example.c
new file mode 100644
index 00000000000..f3c6e4946f9
--- /dev/null
+++ b/Documentation/filesystems/configfs/configfs_example.c
@@ -0,0 +1,474 @@
+/*
+ * vim: noexpandtab ts=8 sts=0 sw=8:
+ *
+ * configfs_example.c - This file is a demonstration module containing
+ *      a number of configfs subsystems.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * Based on sysfs:
+ * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
+ *
+ * configfs Copyright (C) 2005 Oracle.  All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/configfs.h>
+
+
+
+/*
+ * 01-childless
+ *
+ * This first example is a childless subsystem.  It cannot create
+ * any config_items.  It just has attributes.
+ *
+ * Note that we are enclosing the configfs_subsystem inside a container.
+ * This is not necessary if a subsystem has no attributes directly
+ * on the subsystem.  See the next example, 02-simple-children, for
+ * such a subsystem.
+ */
+
+struct childless {
+	struct configfs_subsystem subsys;
+	int showme;
+	int storeme;
+};
+
+struct childless_attribute {
+	struct configfs_attribute attr;
+	ssize_t (*show)(struct childless *, char *);
+	ssize_t (*store)(struct childless *, const char *, size_t);
+};
+
+static inline struct childless *to_childless(struct config_item *item)
+{
+	return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL;
+}
+
+static ssize_t childless_showme_read(struct childless *childless,
+				     char *page)
+{
+	ssize_t pos;
+
+	pos = sprintf(page, "%d\n", childless->showme);
+	childless->showme++;
+
+	return pos;
+}
+
+static ssize_t childless_storeme_read(struct childless *childless,
+				      char *page)
+{
+	return sprintf(page, "%d\n", childless->storeme);
+}
+
+static ssize_t childless_storeme_write(struct childless *childless,
+				       const char *page,
+				       size_t count)
+{
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	childless->storeme = tmp;
+
+	return count;
+}
+
+static ssize_t childless_description_read(struct childless *childless,
+					  char *page)
+{
+	return sprintf(page,
+"[01-childless]\n"
+"\n"
+"The childless subsystem is the simplest possible subsystem in\n"
+"configfs.  It does not support the creation of child config_items.\n"
+"It only has a few attributes.  In fact, it isn't much different\n"
+"than a directory in /proc.\n");
+}
+
+static struct childless_attribute childless_attr_showme = {
+	.attr	= { .ca_owner = THIS_MODULE, .ca_name = "showme", .ca_mode = S_IRUGO },
+	.show	= childless_showme_read,
+};
+static struct childless_attribute childless_attr_storeme = {
+	.attr	= { .ca_owner = THIS_MODULE, .ca_name = "storeme", .ca_mode = S_IRUGO | S_IWUSR },
+	.show	= childless_storeme_read,
+	.store	= childless_storeme_write,
+};
+static struct childless_attribute childless_attr_description = {
+	.attr = { .ca_owner = THIS_MODULE, .ca_name = "description", .ca_mode = S_IRUGO },
+	.show = childless_description_read,
+};
+
+static struct configfs_attribute *childless_attrs[] = {
+	&childless_attr_showme.attr,
+	&childless_attr_storeme.attr,
+	&childless_attr_description.attr,
+	NULL,
+};
+
+static ssize_t childless_attr_show(struct config_item *item,
+				   struct configfs_attribute *attr,
+				   char *page)
+{
+	struct childless *childless = to_childless(item);
+	struct childless_attribute *childless_attr =
+		container_of(attr, struct childless_attribute, attr);
+	ssize_t ret = 0;
+
+	if (childless_attr->show)
+		ret = childless_attr->show(childless, page);
+	return ret;
+}
+
+static ssize_t childless_attr_store(struct config_item *item,
+				    struct configfs_attribute *attr,
+				    const char *page, size_t count)
+{
+	struct childless *childless = to_childless(item);
+	struct childless_attribute *childless_attr =
+		container_of(attr, struct childless_attribute, attr);
+	ssize_t ret = -EINVAL;
+
+	if (childless_attr->store)
+		ret = childless_attr->store(childless, page, count);
+	return ret;
+}
+
+static struct configfs_item_operations childless_item_ops = {
+	.show_attribute		= childless_attr_show,
+	.store_attribute	= childless_attr_store,
+};
+
+static struct config_item_type childless_type = {
+	.ct_item_ops	= &childless_item_ops,
+	.ct_attrs	= childless_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct childless childless_subsys = {
+	.subsys = {
+		.su_group = {
+			.cg_item = {
+				.ci_namebuf = "01-childless",
+				.ci_type = &childless_type,
+			},
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 02-simple-children
+ *
+ * This example merely has a simple one-attribute child.  Note that
+ * there is no extra attribute structure, as the child's attribute is
+ * known from the get-go.  Also, there is no container for the
+ * subsystem, as it has no attributes of its own.
+ */
+
+struct simple_child {
+	struct config_item item;
+	int storeme;
+};
+
+static inline struct simple_child *to_simple_child(struct config_item *item)
+{
+	return item ? container_of(item, struct simple_child, item) : NULL;
+}
+
+static struct configfs_attribute simple_child_attr_storeme = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "storeme",
+	.ca_mode = S_IRUGO | S_IWUSR,
+};
+
+static struct configfs_attribute *simple_child_attrs[] = {
+	&simple_child_attr_storeme,
+	NULL,
+};
+
+static ssize_t simple_child_attr_show(struct config_item *item,
+				      struct configfs_attribute *attr,
+				      char *page)
+{
+	ssize_t count;
+	struct simple_child *simple_child = to_simple_child(item);
+
+	count = sprintf(page, "%d\n", simple_child->storeme);
+
+	return count;
+}
+
+static ssize_t simple_child_attr_store(struct config_item *item,
+				       struct configfs_attribute *attr,
+				       const char *page, size_t count)
+{
+	struct simple_child *simple_child = to_simple_child(item);
+	unsigned long tmp;
+	char *p = (char *) page;
+
+	tmp = simple_strtoul(p, &p, 10);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	if (tmp > INT_MAX)
+		return -ERANGE;
+
+	simple_child->storeme = tmp;
+
+	return count;
+}
+
+static void simple_child_release(struct config_item *item)
+{
+	kfree(to_simple_child(item));
+}
+
+static struct configfs_item_operations simple_child_item_ops = {
+	.release		= simple_child_release,
+	.show_attribute		= simple_child_attr_show,
+	.store_attribute	= simple_child_attr_store,
+};
+
+static struct config_item_type simple_child_type = {
+	.ct_item_ops	= &simple_child_item_ops,
+	.ct_attrs	= simple_child_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+
+static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
+{
+	struct simple_child *simple_child;
+
+	simple_child = kmalloc(sizeof(struct simple_child), GFP_KERNEL);
+	if (!simple_child)
+		return NULL;
+
+	memset(simple_child, 0, sizeof(struct simple_child));
+
+	config_item_init_type_name(&simple_child->item, name,
+				   &simple_child_type);
+
+	simple_child->storeme = 0;
+
+	return &simple_child->item;
+}
+
+static struct configfs_attribute simple_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *simple_children_attrs[] = {
+	&simple_children_attr_description,
+	NULL,
+};
+
+static ssize_t simple_children_attr_show(struct config_item *item,
+			   		 struct configfs_attribute *attr,
+			   		 char *page)
+{
+	return sprintf(page,
+"[02-simple-children]\n"
+"\n"
+"This subsystem allows the creation of child config_items.  These\n"
+"items have only one attribute that is readable and writeable.\n");
+}
+
+static struct configfs_item_operations simple_children_item_ops = {
+	.show_attribute	= simple_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations simple_children_group_ops = {
+	.make_item	= simple_children_make_item,
+};
+
+static struct config_item_type simple_children_type = {
+	.ct_item_ops	= &simple_children_item_ops,
+	.ct_group_ops	= &simple_children_group_ops,
+	.ct_attrs	= simple_children_attrs,
+};
+
+static struct configfs_subsystem simple_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "02-simple-children",
+			.ci_type = &simple_children_type,
+		},
+	},
+};
+
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * 03-group-children
+ *
+ * This example reuses the simple_children group from above.  However,
+ * the simple_children group is not the subsystem itself, it is a
+ * child of the subsystem.  Creation of a group in the subsystem creates
+ * a new simple_children group.  That group can then have simple_child
+ * children of its own.
+ */
+
+struct simple_children {
+	struct config_group group;
+};
+
+static struct config_group *group_children_make_group(struct config_group *group, const char *name)
+{
+	struct simple_children *simple_children;
+
+	simple_children = kmalloc(sizeof(struct simple_children),
+				  GFP_KERNEL);
+	if (!simple_children)
+		return NULL;
+
+	memset(simple_children, 0, sizeof(struct simple_children));
+
+	config_group_init_type_name(&simple_children->group, name,
+				    &simple_children_type);
+
+	return &simple_children->group;
+}
+
+static struct configfs_attribute group_children_attr_description = {
+	.ca_owner = THIS_MODULE,
+	.ca_name = "description",
+	.ca_mode = S_IRUGO,
+};
+
+static struct configfs_attribute *group_children_attrs[] = {
+	&group_children_attr_description,
+	NULL,
+};
+
+static ssize_t group_children_attr_show(struct config_item *item,
+			   		struct configfs_attribute *attr,
+			   		char *page)
+{
+	return sprintf(page,
+"[03-group-children]\n"
+"\n"
+"This subsystem allows the creation of child config_groups.  These\n"
+"groups are like the subsystem simple-children.\n");
+}
+
+static struct configfs_item_operations group_children_item_ops = {
+	.show_attribute	= group_children_attr_show,
+};
+
+/*
+ * Note that, since no extra work is required on ->drop_item(),
+ * no ->drop_item() is provided.
+ */
+static struct configfs_group_operations group_children_group_ops = {
+	.make_group	= group_children_make_group,
+};
+
+static struct config_item_type group_children_type = {
+	.ct_item_ops	= &group_children_item_ops,
+	.ct_group_ops	= &group_children_group_ops,
+	.ct_attrs	= group_children_attrs,
+};
+
+static struct configfs_subsystem group_children_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "03-group-children",
+			.ci_type = &group_children_type,
+		},
+	},
+};
+
+/* ----------------------------------------------------------------- */
+
+/*
+ * We're now done with our subsystem definitions.
+ * For convenience in this module, here's a list of them all.  It
+ * allows the init function to easily register them.  Most modules
+ * will only have one subsystem, and will only call register_subsystem
+ * on it directly.
+ */
+static struct configfs_subsystem *example_subsys[] = {
+	&childless_subsys.subsys,
+	&simple_children_subsys,
+	&group_children_subsys,
+	NULL,
+};
+
+static int __init configfs_example_init(void)
+{
+	int ret;
+	int i;
+	struct configfs_subsystem *subsys;
+
+	for (i = 0; example_subsys[i]; i++) {
+		subsys = example_subsys[i];
+
+		config_group_init(&subsys->su_group);
+		init_MUTEX(&subsys->su_sem);
+		ret = configfs_register_subsystem(subsys);
+		if (ret) {
+			printk(KERN_ERR "Error %d while registering subsystem %s\n",
+			       ret,
+			       subsys->su_group.cg_item.ci_namebuf);
+			goto out_unregister;
+		}
+	}
+
+	return 0;
+
+out_unregister:
+	for (; i >= 0; i--) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+
+	return ret;
+}
+
+static void __exit configfs_example_exit(void)
+{
+	int i;
+
+	for (i = 0; example_subsys[i]; i++) {
+		configfs_unregister_subsystem(example_subsys[i]);
+	}
+}
+
+module_init(configfs_example_init);
+module_exit(configfs_example_exit);
+MODULE_LICENSE("GPL");