Merge branch 'marvell/dt' into late2/dt

* marvell/dt: (41 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

6 files changed, 94 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
index 80b9a94d9a2..8b53273cb22 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
+++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
@@ -38,3 +38,23 @@ Example:
 		reg-names = "mux status", "mux mask";
 		mrvl,intc-nr-irqs = <2>;
 	};
+
+* Marvell Orion Interrupt controller
+
+Required properties
+- compatible :  Should be "marvell,orion-intc".
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. Supported value is <1>.
+- interrupt-controller : Declare this node to be an interrupt controller.
+- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
+        One entry in the list represents 32 interrupts.
+
+Example:
+
+	intc: interrupt-controller {
+        	compatible = "marvell,orion-intc", "marvell,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+                reg = <0xfed20204 0x04>,
+		      <0xfed20214 0x04>;
+        };
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
new file mode 100644
index 00000000000..b5cdd20cde9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/marvell.txt
@@ -0,0 +1,16 @@
+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata"
+- reg           : Address range of controller
+- interrupts    : Interrupt controller is using
+- nr-ports      : Number of SATA ports in use.
+
+Example:
+
+	sata@80000 {
+		compatible = "marvell,orion-sata";
+		reg = <0x80000 0x5000>;
+		interrupts = <21>;
+		nr-ports = <2>;
+	}
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 05428f39d9a..e13787498bc 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -27,3 +27,26 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
       };
+
+* Marvell Orion GPIO Controller
+
+Required properties:
+- compatible         : Should be "marvell,orion-gpio"
+- reg                : Address and length of the register set for controller.
+- gpio-controller    : So we know this is a gpio controller.
+- ngpio              : How many gpios this controller has.
+- interrupts	     : Up to 4 Interrupts for the controller.
+
+Optional properties:
+- mask-offset        : For SMP Orions, offset for Nth CPU
+
+Example:
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpio = <32>;
+			interrupts = <35>, <36>, <37>, <38>;
+		};
diff --git a/Documentation/devicetree/bindings/mtd/orion-nand.txt b/Documentation/devicetree/bindings/mtd/orion-nand.txt
index b2356b7d2fa..2d6ab660e60 100644
--- a/Documentation/devicetree/bindings/mtd/orion-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/orion-nand.txt
@@ -1,7 +1,7 @@
 NAND support for Marvell Orion SoC platforms
 
 Required properties:
-- compatible : "mrvl,orion-nand".
+- compatible : "marvell,orion-nand".
 - reg : Base physical address of the NAND and length of memory mapped
 	region
 
@@ -24,7 +24,7 @@ nand@f4000000 {
 	ale = <1>;
 	bank-width = <1>;
 	chip-delay = <25>;
-	compatible = "mrvl,orion-nand";
+	compatible = "marvell,orion-nand";
 	reg = <0xf4000000 0x400>;
 
 	partition@0 {
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
new file mode 100644
index 00000000000..a3ff50fc76f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -0,0 +1,19 @@
+Marvell Orion SPI device
+
+Required properties:
+- compatible : should be "marvell,orion-spi".
+- reg : offset and length of the register set for the device
+- cell-index : Which of multiple SPI controllers is this.
+Optional properties:
+- interrupts : Is currently not used.
+
+Example:
+       spi@10600 {
+	       compatible = "marvell,orion-spi";
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+	       cell-index = <0>;
+	       reg = <0x10600 0x28>;
+	       interrupts = <23>;
+	       status = "disabled";
+       };
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
new file mode 100644
index 00000000000..0b2503ab0a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -0,0 +1,14 @@
+* Marvell Orion Watchdog Time
+
+Required Properties:
+
+- Compatibility : "marvell,orion-wdt"
+- reg		: Address of the timer registers
+
+Example:
+
+	wdt@20300 {
+		compatible = "marvell,orion-wdt";
+		reg = <0x20300 0x28>;
+		status = "okay";
+	};