Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Changes are seen in a wide range of codes, mainly due to ASoC DAPM
  requirements; HD-audio shows a high peak in diffstat, it's just a
  removal of bunch of old static quirks.

  Some highlights:

   - HDPM: Updates for AIO/RayDAT support, TCO/sync support

   - RME96: Add PCM sync support

   - HD-audio:

     * A few HDMI/DP audio updates (CA assignment fix, stream switching
       fix, Intel DP device list support)
     * Device specific fixes (ASUS/CXT HP mic support, Thinkpad mic
       improvements, Chromebook fixes, STAC9228 Dell fixes)
     * Replace the all static quirks for AD codecs with the generic
       parser
     * WAKEEN support for handling irqs in the power saving mode

   - USB-audio: Clean up implicit fb handling and related codes

   - DAPM is now mandatory for ASoC CODEC drivers; all existing drivers
     have had some level of DAPM support added.  In addition, a lot of
     cleanups and improvements in DAPM.

   - Support for ASoC cross-platform compile test

   - New drivers and support for Analog Devices ADAU1702 and
     ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and
     WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas
     R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and
     PCM1792A and Wolfson Microelectronics WM8997

   - DT bindings for kirkwood and i.MX S/PDIF

   - Clean up and bug fixes: ssm2602, rt5640 and sgtl5000.

   - Core helpers for bitbanged AC'97 reset"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (375 commits)
  ALSA: hda - Re-setup HDMI pin and audio infoframe on stream switches
  ALSA: hda - hdmi: Fallback to ALSA allocation when selecting CA
  ASoC: mxs-sgtl5000: Configure the dai_links as unidirectional
  ASoC: soc-pcm: Allow to specify unidirectional dai_link
  ASoC: fsl_spdif: Staticse non-exported symbols
  ASoC: ssm2602: Fix cache sync
  ASoC: Remove unused sysfs_registered field from snd_soc_codec struct
  ASoC: Remove unused debugfs_dapm field from snd_soc_{platform,codec} struct
  ASoC: Remove unused control_type field from snd_soc_codec struct
  ASoC: fsl: Add one blank space after ':=' in Makefile
  ASoC: fsl: Add wrapping for dev_dbg() in fsl_spdif.c
  ASoC: rt5640: change widget sequence for depop
  ASoC: dapm: Fix auto-disable for inverted controls
  ASoC: fsl: Drop SND_SOC_FSL_UTILS from SND_SOC_IMX_SPDIF
  ASoC: Samsung: Do not queue cyclic buffers multiple times
  ASoC: ep93xx-i2s: Remove unnecessary dev_set_drvdata()
  ASoC: designware_i2s: Remove unnecessary dev_set_drvdata()
  ASoC: fsl_spdif: remove redundant dev_err call in fsl_spdif_probe()
  ASoC: fsl: Add S/PDIF machine driver
  ASoc: kirkwood: Use the Kirkwood audio driver in Dove boards
  ...

1 files changed, 22 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
index 38e51ad2e07..a45ae08c8ed 100644
--- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -7,9 +7,30 @@ Required properties:
 - reg: Should contain SSC registers location and length
 - interrupts: Should contain SSC interrupt
 
-Example:
+
+Required properties for devices compatible with "atmel,at91sam9g45-ssc":
+- dmas: DMA specifier, consisting of a phandle to DMA controller node,
+  the memory interface and SSC DMA channel ID (for tx and rx).
+  See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+- dma-names: Must be "tx", "rx".
+
+Examples:
+- PDC transfer:
 ssc0: ssc@fffbc000 {
 	compatible = "atmel,at91rm9200-ssc";
 	reg = <0xfffbc000 0x4000>;
 	interrupts = <14 4 5>;
 };
+
+- DMA transfer:
+ssc0: ssc@f0010000 {
+      compatible = "atmel,at91sam9g45-ssc";
+      reg = <0xf0010000 0x4000>;
+      interrupts = <28 4 5>;
+      dmas = <&dma0 1 13>,
+	     <&dma0 1 14>;
+      dma-names = "tx", "rx";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+      status = "disabled";
+};