Merge branch 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup changes from Tejun Heo:
 "A lot of activities on cgroup side.  The big changes are focused on
  making cgroup hierarchy handling saner.

   - cgroup_rmdir() had peculiar semantics - it allowed cgroup
     destruction to be vetoed by individual controllers and tried to
     drain refcnt synchronously.  The vetoing never worked properly and
     caused good deal of contortions in cgroup.  memcg was the last
     reamining user.  Michal Hocko removed the usage and cgroup_rmdir()
     path has been simplified significantly.  This was done in a
     separate branch so that the memcg people can base further memcg
     changes on top.

   - The above allowed cleaning up cgroup lifecycle management and
     implementation of generic cgroup iterators which are used to
     improve hierarchy support.

   - cgroup_freezer updated to allow migration in and out of a frozen
     cgroup and handle hierarchy.  If a cgroup is frozen, all descendant
     cgroups are frozen.

   - netcls_cgroup and netprio_cgroup updated to handle hierarchy
     properly.

   - Various fixes and cleanups.

   - Two merge commits.  One to pull in memcg and rmdir cleanups (needed
     to build iterators).  The other pulled in cgroup/for-3.7-fixes for
     device_cgroup fixes so that further device_cgroup patches can be
     stacked on top."

Fixed up a trivial conflict in mm/memcontrol.c as per Tejun (due to
commit bea8c150a7 ("memcg: fix hotplugged memory zone oops") in master
touching code close to commit 2ef37d3fe4 ("memcg: Simplify
mem_cgroup_force_empty_list error handling") in for-3.8)

* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (65 commits)
  cgroup: update Documentation/cgroups/00-INDEX
  cgroup_rm_file: don't delete the uncreated files
  cgroup: remove subsystem files when remounting cgroup
  cgroup: use cgroup_addrm_files() in cgroup_clear_directory()
  cgroup: warn about broken hierarchies only after css_online
  cgroup: list_del_init() on removed events
  cgroup: fix lockdep warning for event_control
  cgroup: move list add after list head initilization
  netprio_cgroup: allow nesting and inherit config on cgroup creation
  netprio_cgroup: implement netprio[_set]_prio() helpers
  netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx
  netprio_cgroup: reimplement priomap expansion
  netprio_cgroup: shorten variable names in extend_netdev_table()
  netprio_cgroup: simplify write_priomap()
  netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking
  cgroup: remove obsolete guarantee from cgroup_task_migrate.
  cgroup: add cgroup->id
  cgroup, cpuset: remove cgroup_subsys->post_clone()
  cgroup: s/CGRP_CLONE_CHILDREN/CGRP_CPUSET_CLONE_CHILDREN/
  cgroup: rename ->create/post_create/pre_destroy/destroy() to ->css_alloc/online/offline/free()
  ...

4 files changed, 82 insertions, 52 deletions

diff --git a/Documentation/cgroups/00-INDEX b/Documentation/cgroups/00-INDEX
index 3f58fa3d6d0..f78b90a35ad 100644
--- a/Documentation/cgroups/00-INDEX
+++ b/Documentation/cgroups/00-INDEX
@@ -1,7 +1,11 @@
 00-INDEX
 	- this file
+blkio-controller.txt
+	- Description for Block IO Controller, implementation and usage details.
 cgroups.txt
 	- Control Groups definition, implementation details, examples and API.
+cgroup_event_listener.c
+	- A user program for cgroup listener.
 cpuacct.txt
 	- CPU Accounting Controller; account CPU usage for groups of tasks.
 cpusets.txt
@@ -10,9 +14,13 @@ devices.txt
 	- Device Whitelist Controller; description, interface and security.
 freezer-subsystem.txt
 	- checkpointing; rationale to not use signals, interface.
+hugetlb.txt
+	- HugeTLB Controller implementation and usage details.
 memcg_test.txt
 	- Memory Resource Controller; implementation details.
 memory.txt
 	- Memory Resource Controller; design, accounting, interface, testing.
+net_prio.txt
+	- Network priority cgroups details and usages.
 resource_counter.txt
 	- Resource Counter API.
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 9e04196c4d7..bcf1a00b06a 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -299,11 +299,9 @@ a cgroup hierarchy's release_agent path is empty.
 1.5 What does clone_children do ?
 ---------------------------------
 
-If the clone_children flag is enabled (1) in a cgroup, then all
-cgroups created beneath will call the post_clone callbacks for each
-subsystem of the newly created cgroup. Usually when this callback is
-implemented for a subsystem, it copies the values of the parent
-subsystem, this is the case for the cpuset.
+This flag only affects the cpuset controller. If the clone_children
+flag is enabled (1) in a cgroup, a new cpuset cgroup will copy its
+configuration from the parent during initialization.
 
 1.6 How do I use cgroups ?
 --------------------------
@@ -553,16 +551,16 @@ call to cgroup_unload_subsys(). It should also set its_subsys.module =
 THIS_MODULE in its .c file.
 
 Each subsystem may export the following methods. The only mandatory
-methods are create/destroy. Any others that are null are presumed to
+methods are css_alloc/free. Any others that are null are presumed to
 be successful no-ops.
 
-struct cgroup_subsys_state *create(struct cgroup *cgrp)
+struct cgroup_subsys_state *css_alloc(struct cgroup *cgrp)
 (cgroup_mutex held by caller)
 
-Called to create a subsystem state object for a cgroup. The
+Called to allocate a subsystem state object for a cgroup. The
 subsystem should allocate its subsystem state object for the passed
 cgroup, returning a pointer to the new object on success or a
-negative error code. On success, the subsystem pointer should point to
+ERR_PTR() value. On success, the subsystem pointer should point to
 a structure of type cgroup_subsys_state (typically embedded in a
 larger subsystem-specific object), which will be initialized by the
 cgroup system. Note that this will be called at initialization to
@@ -571,24 +569,33 @@ identified by the passed cgroup object having a NULL parent (since
 it's the root of the hierarchy) and may be an appropriate place for
 initialization code.
 
-void destroy(struct cgroup *cgrp)
+int css_online(struct cgroup *cgrp)
 (cgroup_mutex held by caller)
 
-The cgroup system is about to destroy the passed cgroup; the subsystem
-should do any necessary cleanup and free its subsystem state
-object. By the time this method is called, the cgroup has already been
-unlinked from the file system and from the child list of its parent;
-cgroup->parent is still valid. (Note - can also be called for a
-newly-created cgroup if an error occurs after this subsystem's
-create() method has been called for the new cgroup).
+Called after @cgrp successfully completed all allocations and made
+visible to cgroup_for_each_child/descendant_*() iterators. The
+subsystem may choose to fail creation by returning -errno. This
+callback can be used to implement reliable state sharing and
+propagation along the hierarchy. See the comment on
+cgroup_for_each_descendant_pre() for details.
 
-int pre_destroy(struct cgroup *cgrp);
+void css_offline(struct cgroup *cgrp);
 
-Called before checking the reference count on each subsystem. This may
-be useful for subsystems which have some extra references even if
-there are not tasks in the cgroup. If pre_destroy() returns error code,
-rmdir() will fail with it. From this behavior, pre_destroy() can be
-called multiple times against a cgroup.
+This is the counterpart of css_online() and called iff css_online()
+has succeeded on @cgrp. This signifies the beginning of the end of
+@cgrp. @cgrp is being removed and the subsystem should start dropping
+all references it's holding on @cgrp. When all references are dropped,
+cgroup removal will proceed to the next step - css_free(). After this
+callback, @cgrp should be considered dead to the subsystem.
+
+void css_free(struct cgroup *cgrp)
+(cgroup_mutex held by caller)
+
+The cgroup system is about to free @cgrp; the subsystem should free
+its subsystem state object. By the time this method is called, @cgrp
+is completely unused; @cgrp->parent is still valid. (Note - can also
+be called for a newly-created cgroup if an error occurs after this
+subsystem's create() method has been called for the new cgroup).
 
 int can_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
 (cgroup_mutex held by caller)
@@ -635,14 +642,6 @@ void exit(struct task_struct *task)
 
 Called during task exit.
 
-void post_clone(struct cgroup *cgrp)
-(cgroup_mutex held by caller)
-
-Called during cgroup_create() to do any parameter
-initialization which might be required before a task could attach.  For
-example, in cpusets, no task may attach before 'cpus' and 'mems' are set
-up.
-
 void bind(struct cgroup *root)
 (cgroup_mutex held by caller)
 
diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt
index 7e62de1e59f..c96a72cbb30 100644
--- a/Documentation/cgroups/freezer-subsystem.txt
+++ b/Documentation/cgroups/freezer-subsystem.txt
@@ -49,13 +49,49 @@ prevent the freeze/unfreeze cycle from becoming visible to the tasks
 being frozen. This allows the bash example above and gdb to run as
 expected.
 
-The freezer subsystem in the container filesystem defines a file named
-freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the
-cgroup. Subsequently writing "THAWED" will unfreeze the tasks in the cgroup.
-Reading will return the current state.
+The cgroup freezer is hierarchical. Freezing a cgroup freezes all
+tasks beloning to the cgroup and all its descendant cgroups. Each
+cgroup has its own state (self-state) and the state inherited from the
+parent (parent-state). Iff both states are THAWED, the cgroup is
+THAWED.
 
-Note freezer.state doesn't exist in root cgroup, which means root cgroup
-is non-freezable.
+The following cgroupfs files are created by cgroup freezer.
+
+* freezer.state: Read-write.
+
+  When read, returns the effective state of the cgroup - "THAWED",
+  "FREEZING" or "FROZEN". This is the combined self and parent-states.
+  If any is freezing, the cgroup is freezing (FREEZING or FROZEN).
+
+  FREEZING cgroup transitions into FROZEN state when all tasks
+  belonging to the cgroup and its descendants become frozen. Note that
+  a cgroup reverts to FREEZING from FROZEN after a new task is added
+  to the cgroup or one of its descendant cgroups until the new task is
+  frozen.
+
+  When written, sets the self-state of the cgroup. Two values are
+  allowed - "FROZEN" and "THAWED". If FROZEN is written, the cgroup,
+  if not already freezing, enters FREEZING state along with all its
+  descendant cgroups.
+
+  If THAWED is written, the self-state of the cgroup is changed to
+  THAWED.  Note that the effective state may not change to THAWED if
+  the parent-state is still freezing. If a cgroup's effective state
+  becomes THAWED, all its descendants which are freezing because of
+  the cgroup also leave the freezing state.
+
+* freezer.self_freezing: Read only.
+
+  Shows the self-state. 0 if the self-state is THAWED; otherwise, 1.
+  This value is 1 iff the last write to freezer.state was "FROZEN".
+
+* freezer.parent_freezing: Read only.
+
+  Shows the parent-state.  0 if none of the cgroup's ancestors is
+  frozen; otherwise, 1.
+
+The root cgroup is non-freezable and the above interface files don't
+exist.
 
 * Examples of usage :
 
@@ -85,18 +121,3 @@ to unfreeze all tasks in the container :
 
 This is the basic mechanism which should do the right thing for user space task
 in a simple scenario.
-
-It's important to note that freezing can be incomplete. In that case we return
-EBUSY. This means that some tasks in the cgroup are busy doing something that
-prevents us from completely freezing the cgroup at this time. After EBUSY,
-the cgroup will remain partially frozen -- reflected by freezer.state reporting
-"FREEZING" when read. The state will remain "FREEZING" until one of these
-things happens:
-
-	1) Userspace cancels the freezing operation by writing "THAWED" to
-		the freezer.state file
-	2) Userspace retries the freezing operation by writing "FROZEN" to
-		the freezer.state file (writing "FREEZING" is not legal
-		and returns EINVAL)
-	3) The tasks that blocked the cgroup from entering the "FROZEN"
-		state disappear from the cgroup's set of tasks.
diff --git a/Documentation/cgroups/net_prio.txt b/Documentation/cgroups/net_prio.txt
index 01b32263559..a82cbd28ea8 100644
--- a/Documentation/cgroups/net_prio.txt
+++ b/Documentation/cgroups/net_prio.txt
@@ -51,3 +51,5 @@ One usage for the net_prio cgroup is with mqprio qdisc allowing application
 traffic to be steered to hardware/driver based traffic classes. These mappings
 can then be managed by administrators or other networking protocols such as
 DCBX.
+
+A new net_prio cgroup inherits the parent's configuration.