x86: isolate PIC/PIT in/out calls

Rather than remove and/or mangle inb_p/outb_p we want to remove the use
of them from inappropriate places. For the PIC/PIT this may eventually
depend on 32/64bitism or similar so start by adding inb/outb_pit and
inb/outb_pic so that we can make them use any scheme we settle on without
disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can
make inb_pit use udelay without messing up inb_p).

Floppy already does this for the fdc. That really only leaves the CMOS as
a core logic item to tackle, and bits of parallel port handling in the
chipset layers.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

7 files changed, 45 insertions, 39 deletions

diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 955dd43b167..d4438ef296d 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1174,11 +1174,11 @@ static void reinit_timer(void)
 
 	spin_lock_irqsave(&i8253_lock, flags);
 	/* set the clock to HZ */
-	outb_p(0x34, PIT_MODE);		/* binary, mode 2, LSB/MSB, ch 0 */
+	outb_pit(0x34, PIT_MODE);		/* binary, mode 2, LSB/MSB, ch 0 */
 	udelay(10);
-	outb_p(LATCH & 0xff, PIT_CH0);	/* LSB */
+	outb_pit(LATCH & 0xff, PIT_CH0);	/* LSB */
 	udelay(10);
-	outb(LATCH >> 8, PIT_CH0);	/* MSB */
+	outb_pit(LATCH >> 8, PIT_CH0);	/* MSB */
 	udelay(10);
 	spin_unlock_irqrestore(&i8253_lock, flags);
 #endif
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index c76fef1ce35..ef62b07b2b4 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -43,26 +43,26 @@ static void init_pit_timer(enum clock_event_mode mode,
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		/* binary, mode 2, LSB/MSB, ch 0 */
-		outb_p(0x34, PIT_MODE);
-		outb_p(LATCH & 0xff , PIT_CH0);	/* LSB */
-		outb(LATCH >> 8 , PIT_CH0);	/* MSB */
+		outb_pit(0x34, PIT_MODE);
+		outb_pit(LATCH & 0xff , PIT_CH0);	/* LSB */
+		outb_pit(LATCH >> 8 , PIT_CH0);		/* MSB */
 		break;
 
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
 		if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
 		    evt->mode == CLOCK_EVT_MODE_ONESHOT) {
-			outb_p(0x30, PIT_MODE);
-			outb_p(0, PIT_CH0);
-			outb_p(0, PIT_CH0);
+			outb_pit(0x30, PIT_MODE);
+			outb_pit(0, PIT_CH0);
+			outb_pit(0, PIT_CH0);
 		}
 		pit_disable_clocksource();
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* One shot setup */
-		outb_p(0x38, PIT_MODE);
 		pit_disable_clocksource();
+		outb_pit(0x38, PIT_MODE);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
@@ -80,8 +80,8 @@ static void init_pit_timer(enum clock_event_mode mode,
 static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
 {
 	spin_lock(&i8253_lock);
-	outb_p(delta & 0xff , PIT_CH0);	/* LSB */
-	outb(delta >> 8 , PIT_CH0);	/* MSB */
+	outb_pit(delta & 0xff , PIT_CH0);	/* LSB */
+	outb_pit(delta >> 8 , PIT_CH0);		/* MSB */
 	spin_unlock(&i8253_lock);
 
 	return 0;
@@ -153,15 +153,15 @@ static cycle_t pit_read(void)
 	 * count), it cannot be newer.
 	 */
 	jifs = jiffies;
-	outb_p(0x00, PIT_MODE);	/* latch the count ASAP */
-	count = inb_p(PIT_CH0);	/* read the latched count */
-	count |= inb_p(PIT_CH0) << 8;
+	outb_pit(0x00, PIT_MODE);	/* latch the count ASAP */
+	count = inb_pit(PIT_CH0);	/* read the latched count */
+	count |= inb_pit(PIT_CH0) << 8;
 
 	/* VIA686a test code... reset the latch if count > max + 1 */
 	if (count > LATCH) {
-		outb_p(0x34, PIT_MODE);
-		outb_p(LATCH & 0xff, PIT_CH0);
-		outb(LATCH >> 8, PIT_CH0);
+		outb_pit(0x34, PIT_MODE);
+		outb_pit(LATCH & 0xff, PIT_CH0);
+		outb_pit(LATCH >> 8, PIT_CH0);
 		count = LATCH - 1;
 	}
 
diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c
index f201e7da1bb..2d25b77102f 100644
--- a/arch/x86/kernel/i8259_32.c
+++ b/arch/x86/kernel/i8259_32.c
@@ -289,20 +289,20 @@ void init_8259A(int auto_eoi)
 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
 
 	/*
-	 * outb_p - this has to work on a wide range of PC hardware.
+	 * outb_pic - this has to work on a wide range of PC hardware.
 	 */
-	outb_p(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
-	outb_p(0x20 + 0, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
-	outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
+	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
+	outb_pic(0x20 + 0, PIC_MASTER_IMR);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+	outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR);	/* 8259A-1 (the master) has a slave on IR2 */
 	if (auto_eoi)	/* master does Auto EOI */
-		outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
 	else		/* master expects normal EOI */
-		outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
 
-	outb_p(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
-	outb_p(0x20 + 8, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
-	outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
-	outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
+	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
+	outb_pic(0x20 + 8, PIC_SLAVE_IMR);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);	/* 8259A-2 is a slave on master's IR2 */
+	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */
 	if (auto_eoi)
 		/*
 		 * In AEOI mode we just have to mask the interrupt
diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c
index 99c8406ae25..d3edb9f23f2 100644
--- a/arch/x86/kernel/i8259_64.c
+++ b/arch/x86/kernel/i8259_64.c
@@ -359,25 +359,25 @@ void init_8259A(int auto_eoi)
 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
 
 	/*
-	 * outb_p - this has to work on a wide range of PC hardware.
+	 * outb_pic - this has to work on a wide range of PC hardware.
 	 */
-	outb_p(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
+	outb_pic(0x11, PIC_MASTER_CMD);	/* ICW1: select 8259A-1 init */
 	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
-	outb_p(IRQ0_VECTOR, PIC_MASTER_IMR);
+	outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
 	/* 8259A-1 (the master) has a slave on IR2 */
-	outb_p(0x04, PIC_MASTER_IMR);
+	outb_pic(0x04, PIC_MASTER_IMR);
 	if (auto_eoi)	/* master does Auto EOI */
-		outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+		outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
 	else		/* master expects normal EOI */
-		outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+		outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
 
-	outb_p(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
+	outb_pic(0x11, PIC_SLAVE_CMD);	/* ICW1: select 8259A-2 init */
 	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
-	outb_p(IRQ8_VECTOR, PIC_SLAVE_IMR);
+	outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
 	/* 8259A-2 is a slave on master's IR2 */
-	outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR);
+	outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
 	/* (slave's support for AEOI in flat mode is to be investigated) */
-	outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
+	outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
 
 	if (auto_eoi)
 		/*
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 57f9ef5a324..a2b030780aa 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -237,7 +237,7 @@ static void __devinit vmi_time_init_clockevent(void)
 void __init vmi_time_init(void)
 {
 	/* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */
-	outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
+	outb_pit(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
 
 	vmi_time_init_clockevent();
 	setup_irq(0, &vmi_clock_action);
diff --git a/include/asm-x86/i8253.h b/include/asm-x86/i8253.h
index 747548ec5d1..b51c0487fc4 100644
--- a/include/asm-x86/i8253.h
+++ b/include/asm-x86/i8253.h
@@ -12,4 +12,7 @@ extern struct clock_event_device *global_clock_event;
 
 extern void setup_pit_timer(void);
 
+#define inb_pit		inb_p
+#define outb_pit	outb_p
+
 #endif	/* __ASM_I8253_H__ */
diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h
index cabcc6cf392..67c319e0efc 100644
--- a/include/asm-x86/i8259.h
+++ b/include/asm-x86/i8259.h
@@ -29,4 +29,7 @@ extern void enable_8259A_irq(unsigned int irq);
 extern void disable_8259A_irq(unsigned int irq);
 extern unsigned int startup_8259A_irq(unsigned int irq);
 
+#define inb_pic		inb_p
+#define outb_pic	outb_p
+
 #endif	/* __ASM_I8259_H__ */