diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-10 10:55:52 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-01-10 10:55:52 -0800 |
| commit | dbe950f201a8edd353b0bd9079e8d536ee4ce37c (patch) | |
| tree | dffbada6b3d33cc67383758570de22b4f45693b6 | |
| parent | f62f61917d72c1fb0101ad405664f6fc868d676b (diff) | |
| parent | da733563be5a9da26fe81d9f007262d00b846e22 (diff) | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
Input: tc3589x-keypad - add missing kerneldoc
Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages
Input: ucb1400_ts - convert to threaded IRQ
Input: ucb1400_ts - drop inline annotations
Input: usb1400_ts - add __devinit/__devexit section annotations
Input: ucb1400_ts - set driver owner
Input: ucb1400_ts - convert to use dev_pm_ops
Input: psmouse - make sure we do not use stale methods
Input: evdev - do not block waiting for an event if fd is nonblock
Input: evdev - if no events and non-block, return EAGAIN not 0
Input: evdev - only allow reading events if a full packet is present
Input: add driver for pixcir i2c touchscreens
Input: samsung-keypad - implement runtime power management support
Input: tegra-kbc - report wakeup key for some platforms
Input: tegra-kbc - add device tree bindings
Input: add driver for AUO In-Cell touchscreens using pixcir ICs
Input: mpu3050 - configure the sampling method
Input: mpu3050 - ensure we enable interrupts
Input: mpu3050 - add of_match table for device-tree probing
Input: sentelic - document the latest hardware
...
Fix up fairly trivial conflicts (device tree matching conflicting with
some independent cleanups) in drivers/input/keyboard/samsung-keypad.c
132 files changed, 5550 insertions, 1645 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index 82d4df13644..0130d6683c1 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -15,9 +15,9 @@ Contact: linux-input@vger.kernel.org Description: Attribute group for control of the status LEDs and the OLEDs. This attribute group is only available for Intuos 4 M, L, - and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only). - Therefore its presence implicitly signifies the presence of - said LEDs and OLEDs on the tablet device. + and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD + (LEDs only). Therefore its presence implicitly signifies the + presence of said LEDs and OLEDs on the tablet device. What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance Date: August 2011 @@ -41,16 +41,17 @@ Date: August 2011 Contact: linux-input@vger.kernel.org Description: Writing to this file sets which one of the four (for Intuos 4) - or of the right four (for Cintiq 21UX2) status LEDs is active (0..3). - The other three LEDs on the same side are always inactive. + or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status + LEDs is active (0..3). The other three LEDs on the same side are + always inactive. What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select Date: September 2011 Contact: linux-input@vger.kernel.org Description: - Writing to this file sets which one of the left four (for Cintiq 21UX2) - status LEDs is active (0..3). The other three LEDs on the left are always - inactive. + Writing to this file sets which one of the left four (for Cintiq 21UX2 + and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on + the left are always inactive. What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance Date: August 2011 diff --git a/Documentation/devicetree/bindings/input/tegra-kbc.txt b/Documentation/devicetree/bindings/input/tegra-kbc.txt new file mode 100644 index 00000000000..5ecfa99089b --- /dev/null +++ b/Documentation/devicetree/bindings/input/tegra-kbc.txt @@ -0,0 +1,18 @@ +* Tegra keyboard controller + +Required properties: +- compatible: "nvidia,tegra20-kbc" + +Optional properties: +- debounce-delay: delay in milliseconds per row scan for debouncing +- repeat-delay: delay in milliseconds before repeat starts +- ghost-filter: enable ghost filtering for this device +- wakeup-source: configure keyboard as a wakeup source for suspend/resume + +Example: + +keyboard: keyboard { + compatible = "nvidia,tegra20-kbc"; + reg = <0x7000e200 0x100>; + ghost-filter; +}; diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt new file mode 100644 index 00000000000..f274c28b510 --- /dev/null +++ b/Documentation/input/alps.txt @@ -0,0 +1,188 @@ +ALPS Touchpad Protocol +---------------------- + +Introduction +------------ + +Currently the ALPS touchpad driver supports four protocol versions in use by +ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various +protocol versions is contained in the following sections. + +Detection +--------- + +All ALPS touchpads should respond to the "E6 report" command sequence: +E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or +00-00-64. + +If the E6 report is successful, the touchpad model is identified using the "E7 +report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is +matched against known models in the alps_model_data_array. + +With protocol versions 3 and 4, the E7 report model signature is always +73-02-64. To differentiate between these versions, the response from the +"Enter Command Mode" sequence must be inspected as described below. + +Command Mode +------------ + +Protocol versions 3 and 4 have a command mode that is used to read and write +one-byte device registers in a 16-bit address space. The command sequence +EC-EC-EC-E9 places the device in command mode, and the device will respond +with 88-07 followed by a third byte. This third byte can be used to determine +whether the devices uses the version 3 or 4 protocol. + +To exit command mode, PSMOUSE_CMD_SETSTREAM (EA) is sent to the touchpad. + +While in command mode, register addresses can be set by first sending a +specific command, either EC for v3 devices or F5 for v4 devices. Then the +address is sent one nibble at a time, where each nibble is encoded as a +command with optional data. This enoding differs slightly between the v3 and +v4 protocols. + +Once an address has been set, the addressed register can be read by sending +PSMOUSE_CMD_GETINFO (E9). The first two bytes of the response contains the +address of the register being read, and the third contains the value of the +register. Registers are written by writing the value one nibble at a time +using the same encoding used for addresses. + +Packet Format +------------- + +In the following tables, the following notation is used. + + CAPITALS = stick, miniscules = touchpad + +?'s can have different meanings on different models, such as wheel rotation, +extra buttons, stick buttons on a dualpoint, etc. + +PS/2 packet format +------------------ + + byte 0: 0 0 YSGN XSGN 1 M R L + byte 1: X7 X6 X5 X4 X3 X2 X1 X0 + byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + +Note that the device never signals overflow condition. + +ALPS Absolute Mode - Protocol Verion 1 +-------------------------------------- + + byte 0: 1 0 0 0 1 x9 x8 x7 + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 ? ? l r ? fin ges + byte 3: 0 ? ? ? ? y9 y8 y7 + byte 4: 0 y6 y5 y4 y3 y2 y1 y0 + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + +ALPS Absolute Mode - Protocol Version 2 +--------------------------------------- + + byte 0: 1 ? ? ? 1 ? ? ? + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 x10 x9 x8 x7 ? fin ges + byte 3: 0 y9 y8 y7 1 M R L + byte 4: 0 y6 y5 y4 y3 y2 y1 y0 + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + +Dualpoint device -- interleaved packet format +--------------------------------------------- + + byte 0: 1 1 0 0 1 1 1 1 + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 x10 x9 x8 x7 0 fin ges + byte 3: 0 0 YSGN XSGN 1 1 1 1 + byte 4: X7 X6 X5 X4 X3 X2 X1 X0 + byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 + byte 6: 0 y9 y8 y7 1 m r l + byte 7: 0 y6 y5 y4 y3 y2 y1 y0 + byte 8: 0 z6 z5 z4 z3 z2 z1 z0 + +ALPS Absolute Mode - Protocol Version 3 +--------------------------------------- + +ALPS protocol version 3 has three different packet formats. The first two are +associated with touchpad events, and the third is associatd with trackstick +events. + +The first type is the touchpad position packet. + + byte 0: 1 ? x1 x0 1 1 1 1 + byte 1: 0 x10 x9 x8 x7 x6 x5 x4 + byte 2: 0 y10 y9 y8 y7 y6 y5 y4 + byte 3: 0 M R L 1 m r l + byte 4: 0 mt x3 x2 y3 y2 y1 y0 + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + +Note that for some devices the trackstick buttons are reported in this packet, +and on others it is reported in the trackstick packets. + +The second packet type contains bitmaps representing the x and y axes. In the +bitmaps a given bit is set if there is a finger covering that position on the +given axis. Thus the bitmap packet can be used for low-resolution multi-touch +data, although finger tracking is not possible. This packet also encodes the +number of contacts (f1 and f0 in the table below). + + byte 0: 1 1 x1 x0 1 1 1 1 + byte 1: 0 x8 x7 x6 x5 x4 x3 x2 + byte 2: 0 y7 y6 y5 y4 y3 y2 y1 + byte 3: 0 y10 y9 y8 1 1 1 1 + byte 4: 0 x14 x13 x12 x11 x10 x9 y0 + byte 5: 0 1 ? ? ? ? f1 f0 + +This packet only appears after a position packet with the mt bit set, and +ususally only appears when there are two or more contacts (although +ocassionally it's seen with only a single contact). + +The final v3 packet type is the trackstick packet. + + byte 0: 1 1 x7 y7 1 1 1 1 + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 y6 y5 y4 y3 y2 y1 y0 + byte 3: 0 1 0 0 1 0 0 0 + byte 4: 0 z4 z3 z2 z1 z0 ? ? + byte 5: 0 0 1 1 1 1 1 1 + +ALPS Absolute Mode - Protocol Version 4 +--------------------------------------- + +Protocol version 4 has an 8-byte packet format. + + byte 0: 1 ? x1 x0 1 1 1 1 + byte 1: 0 x10 x9 x8 x7 x6 x5 x4 + byte 2: 0 y10 y9 y8 y7 y6 y5 y4 + byte 3: 0 1 x3 x2 y3 y2 y1 y0 + byte 4: 0 ? ? ? 1 ? r l + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + byte 6: bitmap data (described below) + byte 7: bitmap data (described below) + +The last two bytes represent a partial bitmap packet, with 3 full packets +required to construct a complete bitmap packet. Once assembled, the 6-byte +bitmap packet has the following format: + + byte 0: 0 1 x7 x6 x5 x4 x3 x2 + byte 1: 0 x1 x0 y4 y3 y2 y1 y0 + byte 2: 0 0 ? x14 x13 x12 x11 x10 + byte 3: 0 x9 x8 y9 y8 y7 y6 y5 + byte 4: 0 0 0 0 0 0 0 0 + byte 5: 0 0 0 0 0 0 0 y10 + +There are several things worth noting here. + + 1) In the bitmap data, bit 6 of byte 0 serves as a sync byte to + identify the first fragment of a bitmap packet. + + 2) The bitmaps represent the same data as in the v3 bitmap packets, although + the packet layout is different. + + 3) There doesn't seem to be a count of the contact points anywhere in the v4 + protocol packets. Deriving a count of contact points must be done by + analyzing the bitmaps. + + 4) There is a 3 to 1 ratio of position packets to bitmap packets. Therefore + MT position can only be updated for every third ST position update, and + the count of contact points can only be updated every third packet as + well. + +So far no v4 devices with tracksticks have been encountered. diff --git a/Documentation/input/gpio-tilt.txt b/Documentation/input/gpio-tilt.txt new file mode 100644 index 00000000000..06d60c3ff5e --- /dev/null +++ b/Documentation/input/gpio-tilt.txt @@ -0,0 +1,103 @@ +Driver for tilt-switches connected via GPIOs +============================================ + +Generic driver to read data from tilt switches connected via gpios. +Orientation can be provided by one or more than one tilt switches, +i.e. each tilt switch providing one axis, and the number of axes +is also not limited. + + +Data structures: +---------------- + +The array of struct gpio in the gpios field is used to list the gpios +that represent the current tilt state. + +The array of struct gpio_tilt_axis describes the axes that are reported +to the input system. The values set therein are used for the +input_set_abs_params calls needed to init the axes. + +The array of struct gpio_tilt_state maps gpio states to the corresponding +values to report. The gpio state is represented as a bitfield where the +bit-index corresponds to the index of the gpio in the struct gpio array. +In the same manner the values stored in the axes array correspond to +the elements of the gpio_tilt_axis-array. + + +Example: +-------- + +Example configuration for a single TS1003 tilt switch that rotates around +one axis in 4 steps and emitts the current tilt via two GPIOs. + +static int sg060_tilt_enable(struct device *dev) { + /* code to enable the sensors */ +}; + +static void sg060_tilt_disable(struct device *dev) { + /* code to disable the sensors */ +}; + +static struct gpio sg060_tilt_gpios[] = { + { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" }, + { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" }, +}; + +static struct gpio_tilt_state sg060_tilt_states[] = { + { + .gpios = (0 << 1) | (0 << 0), + .axes = (int[]) { + 0, + }, + }, { + .gpios = (0 << 1) | (1 << 0), + .axes = (int[]) { + 1, /* 90 degrees */ + }, + }, { + .gpios = (1 << 1) | (1 << 0), + .axes = (int[]) { + 2, /* 180 degrees */ + }, + }, { + .gpios = (1 << 1) | (0 << 0), + .axes = (int[]) { + 3, /* 270 degrees */ + }, + }, +}; + +static struct gpio_tilt_axis sg060_tilt_axes[] = { + { + .axis = ABS_RY, + .min = 0, + .max = 3, + .fuzz = 0, + .flat = 0, + }, +}; + +static struct gpio_tilt_platform_data sg060_tilt_pdata= { + .gpios = sg060_tilt_gpios, + .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios), + + .axes = sg060_tilt_axes, + .nr_axes = ARRAY_SIZE(sg060_tilt_axes), + + .states = sg060_tilt_states, + .nr_states = ARRAY_SIZE(sg060_tilt_states), + + .debounce_interval = 100, + + .poll_interval = 1000, + .enable = sg060_tilt_enable, + .disable = sg060_tilt_disable, +}; + +static struct platform_device sg060_device_tilt = { + .name = "gpio-tilt-polled", + .id = -1, + .dev = { + .platform_data = &sg060_tilt_pdata, + }, +}; diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt index b2ef125b71f..89251e2a3eb 100644 --- a/Documentation/input/sentelic.txt +++ b/Documentation/input/sentelic.txt @@ -1,5 +1,5 @@ -Copyright (C) 2002-2010 Sentelic Corporation. -Last update: Jan-13-2010 +Copyright (C) 2002-2011 Sentelic Corporation. +Last update: Dec-07-2011 ============================================================================== * Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons) @@ -140,6 +140,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|--------- Byte 1: Bit7~Bit6 => 00, Normal data packet => 01, Absolute coordination packet => 10, Notify packet + => 11, Normal data packet with on-pad click Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. When both fingers are up, the last two reports have zero valid bit. @@ -164,6 +165,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|--------- Byte 1: Bit7~Bit6 => 00, Normal data packet => 01, Absolute coordinates packet => 10, Notify packet + => 11, Normal data packet with on-pad click Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. When both fingers are up, the last two reports have zero valid bit. @@ -188,6 +190,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|--------- Byte 1: Bit7~Bit6 => 00, Normal data packet => 01, Absolute coordinates packet => 10, Notify packet + => 11, Normal data packet with on-pad click Bit5 => 1 Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): 0: left button is generated by the on-pad command @@ -205,7 +208,7 @@ Byte 4: Bit7 => scroll right button Bit6 => scroll left button Bit5 => scroll down button Bit4 => scroll up button - * Note that if gesture and additional buttoni (Bit4~Bit7) + * Note that if gesture and additional button (Bit4~Bit7) happen at the same time, the button information will not be sent. Bit3~Bit0 => Reserved @@ -227,6 +230,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|--------- Byte 1: Bit7~Bit6 => 00, Normal data packet => 01, Absolute coordinates packet => 10, Notify packet + => 11, Normal data packet with on-pad click Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. When both fingers are up, the last two reports have zero valid bit. @@ -253,6 +257,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|--------- Byte 1: Bit7~Bit6 => 00, Normal data packet => 01, Absolute coordination packet => 10, Notify packet + => 11, Normal data packet with on-pad click Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up. When both fingers are up, the last two reports have zero valid bit. @@ -279,8 +284,9 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|--------- Byte 1: Bit7~Bit6 => 00, Normal data packet => 01, Absolute coordination packet => 10, Notify packet + => 11, Normal data packet with on-pad click Bit5 => 1 - Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1): + Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1): 0: left button is generated by the on-pad command 1: left button is generated by the external button Bit3 => 1 @@ -307,6 +313,110 @@ Sample sequence of Multi-finger, Multi-coordinate mode: abs pkt 2, ..., notify packet (valid bit == 0) ============================================================================== +* Absolute position for STL3888-Cx and STL3888-Dx. +============================================================================== +Single Finger, Absolute Coordinate Mode (SFAC) + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Coordinate mode(always 0 in SFAC mode): + 0: single-finger absolute coordinates (SFAC) mode + 1: multi-finger, multiple coordinates (MFMC) mode + Bit4 => 0: The LEFT button is generated by on-pad command (OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => Always 1, as specified by PS/2 protocol. + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => 4th mouse button(forward one page) + Bit5 => 5th mouse button(backward one page) + Bit6 => scroll left button + Bit7 => scroll right button + +Multi Finger, Multiple Coordinates Mode (MFMC): + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordination packet + => 10, Notify packet + Bit5 => Coordinate mode (always 1 in MFMC mode): + 0: single-finger absolute coordinates (SFAC) mode + 1: multi-finger, multiple coordinates (MFMC) mode + Bit4 => 0: The LEFT button is generated by on-pad command (OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => Always 1, as specified by PS/2 protocol. + Bit2 => Finger index, 0 is the first finger, 1 is the second finger. + If bit 1 and 0 are all 1 and bit 4 is 0, the middle external + button is pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: X coordinate (xpos[9:2]) +Byte 3: Y coordinate (ypos[9:2]) +Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0]) + Bit3~Bit2 => X coordinate (ypos[1:0]) + Bit4 => 4th mouse button(forward one page) + Bit5 => 5th mouse button(backward one page) + Bit6 => scroll left button + Bit7 => scroll right button + + When one of the two fingers is up, the device will output four consecutive +MFMC#0 report packets with zero X and Y to represent 1st finger is up or +four consecutive MFMC#1 report packets with zero X and Y to represent that +the 2nd finger is up. On the other hand, if both fingers are up, the device +will output four consecutive single-finger, absolute coordinate(SFAC) packets +with zero X and Y. + +Notify Packet for STL3888-Cx/Dx + Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------| + 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0| + |---------------| |---------------| |---------------| |---------------| + +Byte 1: Bit7~Bit6 => 00, Normal data packet + => 01, Absolute coordinates packet + => 10, Notify packet + Bit5 => Always 0 + Bit4 => 0: The LEFT button is generated by on-pad command(OPC) + 1: The LEFT button is generated by external button + Default is 1 even if the LEFT button is not pressed. + Bit3 => 1 + Bit2 => Middle Button, 1 is pressed, 0 is not pressed. + Bit1 => Right Button, 1 is pressed, 0 is not pressed. + Bit0 => Left Button, 1 is pressed, 0 is not pressed. +Byte 2: Message type: + 0xba => gesture information + 0xc0 => one finger hold-rotating gesture +Byte 3: The first parameter for the received message: + 0xba => gesture ID (refer to the 'Gesture ID' section) + 0xc0 => region ID +Byte 4: The second parameter for the received message: + 0xba => N/A + 0xc0 => finger up/down information + +Sample sequence of Multi-finger, Multi-coordinates mode: + + notify packet (valid bit == 1), MFMC packet 1 (byte 1, bit 2 == 0), + MFMC packet 2 (byte 1, bit 2 == 1), MFMC packet 1, MFMC packet 2, + ..., notify packet (valid bit == 0) + + That is, when the device is in MFMC mode, the host will receive + interleaved absolute coordinate packets for each finger. + +============================================================================== * FSP Enable/Disable packet ============================================================================== Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 @@ -348,9 +458,10 @@ http://www.computer-engineering.org/ps2mouse/ ============================================================================== 1. Identify FSP by reading device ID(0x00) and version(0x01) register -2. Determine number of buttons by reading status2 (0x0b) register +2a. For FSP version < STL3888 Cx, determine number of buttons by reading + the 'test mode status' (0x20) register: - buttons = reg[0x0b] & 0x30 + buttons = reg[0x20] & 0x30 if buttons == 0x30 or buttons == 0x20: # two/four buttons @@ -365,6 +476,10 @@ http://www.computer-engineering.org/ps2mouse/ Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' section A for packet parsing detail +2b. For FSP version >= STL3888 Cx: + Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse' + section A for packet parsing detail (ignore byte 4, bit ~ 7) + ============================================================================== * Programming Sequence for Register Reading/Writing ============================================================================== @@ -374,7 +489,7 @@ Register inversion requirement: Following values needed to be inverted(the '~' operator in C) before being sent to FSP: - 0xe9, 0xee, 0xf2 and 0xff. + 0xe8, 0xe9, 0xee, 0xf2, 0xf3 and 0xff. Register swapping requirement: @@ -415,7 +530,18 @@ Register reading sequence: 8. send 0xe9(status request) PS/2 command to FSP; - 9. the response read from FSP should be the requested register value. + 9. the 4th byte of the response read from FSP should be the + requested register value(?? indicates don't care byte): + + host: 0xe9 + 3888: 0xfa (??) (??) (val) + + * Note that since the Cx release, the hardware will return 1's + complement of the register value at the 3rd byte of status request + result: + + host: 0xe9 + 3888: 0xfa (??) (~val) (val) Register writing sequence: @@ -465,71 +591,194 @@ Register writing sequence: 9. the register writing sequence is completed. + * Note that since the Cx release, the hardware will return 1's + complement of the register value at the 3rd byte of status request + result. Host can optionally send another 0xe9 (status request) PS/2 + command to FSP at the end of register writing to verify that the + register writing operation is successful (?? indicates don't care + byte): + + host: 0xe9 + 3888: 0xfa (??) (~val) (val) + +============================================================================== +* Programming Sequence for Page Register Reading/Writing +============================================================================== + + In order to overcome the limitation of maximum number of registers +supported, the hardware separates register into different groups called +'pages.' Each page is able to include up to 255 registers. + + The default page after power up is 0x82; therefore, if one has to get +access to register 0x8301, one has to use following sequence to switch +to page 0x83, then start reading/writing from/to offset 0x01 by using +the register read/write sequence described in previous section. + +Page register reading sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. send 0x66 PS/2 command to FSP; + + 3. send 0x88 PS/2 command to FSP; + + 4. send 0xf3 PS/2 command to FSP; + + 5. send 0x83 PS/2 command to FSP; + + 6. send 0x88 PS/2 command to FSP; + + 7. send 0xe9(status request) PS/2 command to FSP; + + 8. the response read from FSP should be the requested page value. + +Page register writing sequence: + + 1. send 0xf3 PS/2 command to FSP; + + 2. send 0x38 PS/2 command to FSP; + + 3. send 0x88 PS/2 command to FSP; + + 4. send 0xf3 PS/2 command to FSP; + + 5. if the page address being written is not required to be + inverted(refer to the 'Register inversion requirement' section), + goto step 6 + + 5a. send 0x47 PS/2 command to FSP; + + 5b. send the inverted page address to FSP and goto step 9; + + 6. if the page address being written is not required to be + swapped(refer to the 'Register swapping requirement' section), + goto step 7 + + 6a. send 0x44 PS/2 command to FSP; + + 6b. send the swapped page address to FSP and goto step 9; + + 7. send 0x33 PS/2 command to FSP; + + 8. send the page address to FSP; + + 9. the page register writing sequence is completed. + +============================================================================== +* Gesture ID +============================================================================== + + Unlike other devices which sends multiple fingers' coordinates to host, +FSP processes multiple fingers' coordinates internally and convert them +into a 8 bits integer, namely 'Gesture ID.' Following is a list of +supported gesture IDs: + + ID Description + 0x86 2 finger straight up + 0x82 2 finger straight down + 0x80 2 finger straight right + 0x84 2 finger straight left + 0x8f 2 finger zoom in + 0x8b 2 finger zoom out + 0xc0 2 finger curve, counter clockwise + 0xc4 2 finger curve, clockwise + 0x2e 3 finger straight up + 0x2a 3 finger straight down + 0x28 3 finger straight right + 0x2c 3 finger straight left + 0x38 palm + ============================================================================== * Register Listing ============================================================================== + Registers are represented in 16 bits values. The higher 8 bits represent +the page address and the lower 8 bits represent the relative offset within +that particular page. Refer to the 'Programming Sequence for Page Register +Reading/Writing' section for instructions on how to change current page +address. + offset width default r/w name -0x00 bit7~bit0 0x01 RO device ID +0x8200 bit7~bit0 0x01 RO device ID -0x01 bit7~bit0 0xc0 RW version ID +0x8201 bit7~bit0 RW version ID + 0xc1: STL3888 Ax + 0xd0 ~ 0xd2: STL3888 Bx + 0xe0 ~ 0xe1: STL3888 Cx + 0xe2 ~ 0xe3: STL3888 Dx -0x02 bit7~bit0 0x01 RO vendor ID +0x8202 bit7~bit0 0x01 RO vendor ID -0x03 bit7~bit0 0x01 RO product ID +0x8203 bit7~bit0 0x01 RO product ID -0x04 bit3~bit0 0x01 RW revision ID +0x8204 bit3~bit0 0x01 RW revision ID -0x0b RO test mode status 1 - bit3 1 RO 0: rotate 180 degree, 1: no rotation +0x820b test mode status 1 + bit3 1 RO 0: rotate 180 degree + 1: no rotation + *only supported by H/W prior to Cx - bit5~bit4 RO number of buttons - 11 => 2, lbtn/rbtn - 10 => 4, lbtn/rbtn/scru/scrd - 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr - 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn +0x820f register file page control + bit2 0 RW 1: rotate 180 degree + 0: no rotation + *supported since Cx -0x0f RW register file page control bit0 0 RW 1 to enable page 1 register files + *only supported by H/W prior to Cx -0x10 RW system control 1 +0x8210 RW system control 1 bit0 1 RW Reserved, must be 1 bit1 0 RW Reserved, must be 0 - bit4 1 RW Reserved, must be 0 - bit5 0 RW register clock gating enable + bit4 0 RW Reserved, must be 0 + bit5 1 RW register clock gating enable 0: read only, 1: read/write enable (Note that following registers does not require clock gating being enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e 40 41 42 43. In addition to that, this bit must be 1 when gesture mode is enabled) -0x31 RW on-pad command detection +0x8220 test mode status + bit5~bit4 RO number of buttons + 11 => 2, lbtn/rbtn + 10 => 4, lbtn/rbtn/scru/scrd + 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr + 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn + *only supported by H/W prior to Cx + +0x8231 RW on-pad command detection bit7 0 RW on-pad command left button down tag enable 0: disable, 1: enable + *only supported by H/W prior to Cx -0x34 RW on-pad command control 5 +0x8234 RW on-pad command control 5 bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5 (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx bit7 0 RW on-pad tap zone enable 0: disable, 1: enable + *only supported by H/W prior to Cx -0x35 RW on-pad command control 6 +0x8235 RW on-pad command control 6 bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5 (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx -0x36 RW on-pad command control 7 +0x8236 RW on-pad command control 7 bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5 (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx -0x37 RW on-pad command control 8 +0x8237 RW on-pad command control 8 bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5 (Note that position unit is in 0.5 scanline) + *only supported by H/W prior to Cx -0x40 RW system control 5 +0x8240 RW system control 5 bit1 0 RW FSP Intellimouse mode enable 0: disable, 1: enable + *only supported by H/W prior to Cx bit2 0 RW movement + abs. coordinate mode enable 0: disable, 1: enable @@ -537,6 +786,7 @@ offset width default r/w name bit 1 is not set. However, the format is different from that of bit 1. In addition, when bit 1 and bit 2 are set at the same time, bit 2 will override bit 1.) + *only supported by H/W prior to Cx bit3 0 RW abs. coordinate only mode enable 0: disable, 1: enable @@ -544,9 +794,11 @@ offset width default r/w name bit 1 is not set. However, the format is different from that of bit 1. In addition, when bit 1, bit 2 and bit 3 are set at the same time, bit 3 will override bit 1 and 2.) + *only supported by H/W prior to Cx bit5 0 RW auto switch enable 0: disable, 1: enable + *only supported by H/W prior to Cx bit6 0 RW G0 abs. + notify packet format enable 0: disable, 1: enable @@ -554,18 +806,68 @@ offset width default r/w name bit 2 and 3. That is, if any of those bit is 1, host will receive absolute coordinates; otherwise, host only receives packets with relative coordinate.) + *only supported by H/W prior to Cx bit7 0 RW EN_PS2_F2: PS/2 gesture mode 2nd finger packet enable 0: disable, 1: enable + *only supported by H/W prior to Cx -0x43 RW on-pad control +0x8243 RW on-pad control bit0 0 RW on-pad control enable 0: disable, 1: enable (Note that if this bit is cleared, bit 3/5 will be ineffective) + *only supported by H/W prior to Cx bit3 0 RW on-pad fix vertical scrolling enable 0: disable, 1: enable + *only supported by H/W prior to Cx bit5 0 RW on-pad fix horizontal scrolling enable 0: disable, 1: enable + *only supported by H/W prior to Cx + +0x8290 RW software control register 1 + bit0 0 RW absolute coordination mode + 0: disable, 1: enable + *supported since Cx + + bit1 0 RW gesture ID output + 0: disable, 1: enable + *supported since Cx + + bit2 0 RW two fingers' coordinates output + 0: disable, 1: enable + *supported since Cx + + bit3 0 RW finger up one packet output + 0: disable, 1: enable + *supported since Cx + + bit4 0 RW absolute coordination continuous mode + 0: disable, 1: enable + *supported since Cx + + bit6~bit5 00 RW gesture group selection + 00: basic + 01: suite + 10: suite pro + 11: advanced + *supported since Cx + + bit7 0 RW Bx packet output compatible mode + 0: disable, 1: enable *supported since Cx + *supported since Cx + + +0x833d RW on-pad command control 1 + bit7 1 RW on-pad command detection enable + 0: disable, 1: enable + *supported since Cx + +0x833e RW on-pad command detection + bit7 0 RW on-pad command left button down tag + enable. Works only in H/W based PS/2 + data packet mode. + 0: disable, 1: enable + *supported since Cx diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h index 4f3572a1c68..20bb0545f99 100644 --- a/arch/arm/mach-tegra/include/mach/kbc.h +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -53,6 +53,7 @@ struct tegra_kbc_platform_data { struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; const struct matrix_keymap_data *keymap_data; + u32 wakeup_key; bool wakeup; bool use_fn_map; bool use_ghost_filter; diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h index b59a6483cd8..c81ace332a1 100644 --- a/arch/arm/plat-samsung/include/plat/keypad.h +++ b/arch/arm/plat-samsung/include/plat/keypad.h @@ -13,32 +13,7 @@ #ifndef __PLAT_SAMSUNG_KEYPAD_H #define __PLAT_SAMSUNG_KEYPAD_H -#include <linux/input/matrix_keypad.h> - -#define SAMSUNG_MAX_ROWS 8 -#define SAMSUNG_MAX_COLS 8 - -/** - * struct samsung_keypad_platdata - Platform device data for Samsung Keypad. - * @keymap_data: pointer to &matrix_keymap_data. - * @rows: number of keypad row supported. - * @cols: number of keypad col supported. - * @no_autorepeat: disable key autorepeat. - * @wakeup: controls whether the device should be set up as wakeup source. - * @cfg_gpio: configure the GPIO. - * - * Initialisation data specific to either the machine or the platform - * for the device driver to use or call-back when configuring gpio. - */ -struct samsung_keypad_platdata { - const struct matrix_keymap_data *keymap_data; - unsigned int rows; - unsigned int cols; - bool no_autorepeat; - bool wakeup; - - void (*cfg_gpio)(unsigned int rows, unsigned int cols); -}; +#include <linux/input/samsung-keypad.h> /** * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device. diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 4cf25347b01..76457d50bc3 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -369,7 +369,7 @@ static int evdev_fetch_next_event(struct evdev_client *client, spin_lock_irq(&client->buffer_lock); - have_event = client->head != client->tail; + have_event = client->packet_head != client->tail; if (have_event) { *event = client->buffer[client->tail++]; client->tail &= client->bufsize - 1; @@ -391,14 +391,13 @@ static ssize_t evdev_read(struct file *file, char __user *buffer, if (count < input_event_size()) return -EINVAL; - if (client->packet_head == client->tail && evdev->exist && - (file->f_flags & O_NONBLOCK)) - return -EAGAIN; - - retval = wait_event_interruptible(evdev->wait, - client->packet_head != client->tail || !evdev->exist); - if (retval) - return retval; + if (!(file->f_flags & O_NONBLOCK)) { + retval = wait_event_interruptible(evdev->wait, + client->packet_head != client->tail || + !evdev->exist); + if (retval) + return retval; + } if (!evdev->exist) return -ENODEV; @@ -412,6 +411,9 @@ static ssize_t evdev_read(struct file *file, char __user *buffer, retval += input_event_size(); } + if (retval == 0 && (file->f_flags & O_NONBLOCK)) + return -EAGAIN; + return retval; } diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c index 7dfe1009fae..7f161d93203 100644 --- a/drivers/input/input-polldev.c +++ b/drivers/input/input-polldev.c @@ -84,10 +84,12 @@ static ssize_t input_polldev_set_poll(struct device *dev, { struct input_polled_dev *polldev = dev_get_drvdata(dev); struct input_dev *input = polldev->input; - unsigned long interval; + unsigned int interval; + int err; - if (strict_strtoul(buf, 0, &interval)) - return -EINVAL; + err = kstrtouint(buf, 0, &interval); + if (err) + return err; if (interval < polldev->poll_interval_min) return -EINVAL; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 615c21f2a55..cdc385b2cf7 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -221,6 +221,22 @@ config KEYBOARD_TCA6416 To compile this driver as a module, choose M here: the module will be called tca6416_keypad. +config KEYBOARD_TCA8418 + tristate "TCA8418 Keypad Support" + depends on I2C + help + This driver implements basic keypad functionality + for keys connected through TCA8418 keypad decoder. + + Say Y here if your device has keys connected to + TCA8418 keypad decoder. + + If enabled the complete TCA8418 device will be managed through + this driver. + + To compile this driver as a module, choose M here: the + module will be called tca8418_keypad. + config KEYBOARD_MATRIX tristate "GPIO driven matrix keypad support" depends on GENERIC_GPIO @@ -425,9 +441,10 @@ config KEYBOARD_PMIC8XXX config KEYBOARD_SAMSUNG tristate "Samsung keypad support" - depends on SAMSUNG_DEV_KEYPAD + depends on HAVE_CLK help - Say Y here if you want to use the Samsung keypad. + Say Y here if you want to use the keypad on your Samsung mobile + device. To compile this driver as a module, choose M here: the module will be called samsung-keypad. diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index ddde0fd476f..df7061f1291 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o +obj-$(CONFIG_KEYBOARD_TCA8418) += tca8418_keypad.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c index 3db8006dac3..e9e8674dfda 100644 --- a/drivers/input/keyboard/adp5520-keys.c +++ b/drivers/input/keyboard/adp5520-keys.c @@ -202,18 +202,7 @@ static struct platform_driver adp5520_keys_driver = { .probe = adp5520_keys_probe, .remove = __devexit_p(adp5520_keys_remove), }; - -static int __init adp5520_keys_init(void) -{ - return platform_driver_register(&adp5520_keys_driver); -} -module_init(adp5520_keys_init); - -static void __exit adp5520_keys_exit(void) -{ - platform_driver_unregister(&adp5520_keys_driver); -} -module_exit(adp5520_keys_exit); +module_platform_driver(adp5520_keys_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("Keys ADP5520 Driver"); diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c index 79172af164f..6df5f6aa790 100644 --- a/drivers/input/keyboard/amikbd.c +++ b/drivers/input/keyboard/amikbd.c @@ -259,19 +259,6 @@ static struct platform_driver amikbd_driver = { .owner = THIS_MODULE, }, }; - -static int __init amikbd_init(void) -{ - return platform_driver_probe(&amikbd_driver, amikbd_probe); -} - -module_init(amikbd_init); - -static void __exit amikbd_exit(void) -{ - platform_driver_unregister(&amikbd_driver); -} - -module_exit(amikbd_exit); +module_platform_driver(amikbd_driver); MODULE_ALIAS("platform:amiga-keyboard"); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 19cfc0cf558..e05a2e7073c 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1305,7 +1305,7 @@ static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_extra; unsigned char old_set; @@ -1313,7 +1313,11 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun if (!atkbd->write) return -EIO; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->extra != value) { @@ -1389,11 +1393,15 @@ static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_scroll; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->scroll != value) { @@ -1433,7 +1441,7 @@ static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; unsigned char old_set; bool old_extra; @@ -1441,7 +1449,11 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) if (!atkbd->write) return -EIO; - if (strict_strtoul(buf, 10, &value) || (value != 2 && value != 3)) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value != 2 && value != 3) return -EINVAL; if (atkbd->set != value) { @@ -1484,14 +1496,18 @@ static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_softrepeat, old_softraw; if (!atkbd->write) return -EIO; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->softrepeat != value) { @@ -1534,11 +1550,15 @@ static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; - unsigned long value; + unsigned int value; int err; bool old_softraw; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (atkbd->softraw != value) { diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index 7d989603f87..8eb9116e0a5 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -384,7 +384,7 @@ static int bfin_kpad_resume(struct platform_device *pdev) # define bfin_kpad_resume NULL #endif -struct platform_driver bfin_kpad_device_driver = { +static struct platform_driver bfin_kpad_device_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, @@ -394,19 +394,7 @@ struct platform_driver bfin_kpad_device_driver = { .suspend = bfin_kpad_suspend, .resume = bfin_kpad_resume, }; - -static int __init bfin_kpad_init(void) -{ - return platform_driver_register(&bfin_kpad_device_driver); -} - -static void __exit bfin_kpad_exit(void) -{ - platform_driver_unregister(&bfin_kpad_device_driver); -} - -module_init(bfin_kpad_init); -module_exit(bfin_kpad_exit); +module_platform_driver(bfin_kpad_device_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index 9d82b3aeff5..46982524755 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -328,18 +328,7 @@ static struct platform_driver davinci_ks_driver = { }, .remove = __devexit_p(davinci_ks_remove), }; - -static int __init davinci_ks_init(void) -{ - return platform_driver_probe(&davinci_ks_driver, davinci_ks_probe); -} -module_init(davinci_ks_init); - -static void __exit davinci_ks_exit(void) -{ - platform_driver_unregister(&davinci_ks_driver); -} -module_exit(davinci_ks_exit); +module_platform_driver(davinci_ks_driver); MODULE_AUTHOR("Miguel Aguilar"); MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver"); diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c index 4662c5da801..0ba69f3fcb5 100644 --- a/drivers/input/keyboard/ep93xx_keypad.c +++ b/drivers/input/keyboard/ep93xx_keypad.c @@ -390,19 +390,7 @@ static struct platform_driver ep93xx_keypad_driver = { .suspend = ep93xx_keypad_suspend, .resume = ep93xx_keypad_resume, }; - -static int __init ep93xx_keypad_init(void) -{ - return platform_driver_register(&ep93xx_keypad_driver); -} - -static void __exit ep93xx_keypad_exit(void) -{ - platform_driver_unregister(&ep93xx_keypad_driver); -} - -module_init(ep93xx_keypad_init); -module_exit(ep93xx_keypad_exit); +module_platform_driver(ep93xx_keypad_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c index 4c17aff2065..20c8ab17221 100644 --- a/drivers/input/keyboard/gpio_keys_polled.c +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -241,19 +241,7 @@ static struct platform_driver gpio_keys_polled_driver = { .owner = THIS_MODULE, }, }; - -static int __init gpio_keys_polled_init(void) -{ - return platform_driver_register(&gpio_keys_polled_driver); -} - -static void __exit gpio_keys_polled_exit(void) -{ - platform_driver_unregister(&gpio_keys_polled_driver); -} - -module_init(gpio_keys_polled_init); -module_exit(gpio_keys_polled_exit); +module_platform_driver(gpio_keys_polled_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index ccebd2d0915..fb87b3bcadb 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -619,19 +619,7 @@ static struct platform_driver imx_keypad_driver = { .probe = imx_keypad_probe, .remove = __devexit_p(imx_keypad_remove), }; - -static int __init imx_keypad_init(void) -{ - return platform_driver_register(&imx_keypad_driver); -} - -static void __exit imx_keypad_exit(void) -{ - platform_driver_unregister(&imx_keypad_driver); -} - -module_init(imx_keypad_init); -module_exit(imx_keypad_exit); +module_platform_driver(imx_keypad_driver); MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>"); MODULE_DESCRIPTION("IMX Keypad Port Driver"); diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c index 7197c569874..24f3ea01c4d 100644 --- a/drivers/input/keyboard/jornada680_kbd.c +++ b/drivers/input/keyboard/jornada680_kbd.c @@ -260,19 +260,7 @@ static struct platform_driver jornada680kbd_driver = { .probe = jornada680kbd_probe, .remove = __devexit_p(jornada680kbd_remove), }; - -static int __init jornada680kbd_init(void) -{ - return platform_driver_register(&jornada680kbd_driver); -} - -static void __exit jornada680kbd_exit(void) -{ - platform_driver_unregister(&jornada680kbd_driver); -} - -module_init(jornada680kbd_init); -module_exit(jornada680kbd_exit); +module_platform_driver(jornada680kbd_driver); MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>"); MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver"); diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c index 0aa6740e60d..eeafc30b207 100644 --- a/drivers/input/keyboard/jornada720_kbd.c +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -174,16 +174,4 @@ static struct platform_driver jornada720_kbd_driver = { .probe = jornada720_kbd_probe, .remove = __devexit_p(jornada720_kbd_remove), }; - -static int __init jornada720_kbd_init(void) -{ - return platform_driver_register(&jornada720_kbd_driver); -} - -static void __exit jornada720_kbd_exit(void) -{ - platform_driver_unregister(&jornada720_kbd_driver); -} - -module_init(jornada720_kbd_init); -module_exit(jornada720_kbd_exit); +module_platform_driver(jornada720_kbd_driver); diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 82d1dc8badd..21823bfc791 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -545,13 +545,12 @@ static ssize_t lm8323_pwm_store_time(struct device *dev, { struct led_classdev *led_cdev = dev_get_drvdata(dev); struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev); - int ret; - unsigned long time; + int ret, time; - ret = strict_strtoul(buf, 10, &time); + ret = kstrtoint(buf, 10, &time); /* Numbers only, please. */ if (ret) - return -EINVAL; + return ret; pwm->fade_time = time; @@ -613,9 +612,9 @@ static ssize_t lm8323_set_disable(struct device *dev, { struct lm8323_chip *lm = dev_get_drvdata(dev); int ret; - unsigned long i; + unsigned int i; - ret = strict_strtoul(buf, 10, &i); + ret = kstrtouint(buf, 10, &i); mutex_lock(&lm->lock); lm->kp_enabled = !i; diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index e2ae657717e..9b223d73de3 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -496,19 +496,7 @@ static struct platform_driver matrix_keypad_driver = { #endif }, }; - -static int __init matrix_keypad_init(void) -{ - return platform_driver_register(&matrix_keypad_driver); -} - -static void __exit matrix_keypad_exit(void) -{ - platform_driver_unregister(&matrix_keypad_driver); -} - -module_init(matrix_keypad_init); -module_exit(matrix_keypad_exit); +module_platform_driver(matrix_keypad_driver); MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c index fcdec5e2b29..5a71e55c9c5 100644 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -379,7 +379,7 @@ static const struct dev_pm_ops ske_keypad_dev_pm_ops = { }; #endif -struct platform_driver ske_keypad_driver = { +static struct platform_driver ske_keypad_driver = { .driver = { .name = "nmk-ske-keypad", .owner = THIS_MODULE, @@ -390,18 +390,7 @@ struct platform_driver ske_keypad_driver = { .probe = ske_keypad_probe, .remove = __devexit_p(ske_keypad_remove), }; - -static int __init ske_keypad_init(void) -{ - return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe); -} -module_init(ske_keypad_init); - -static void __exit ske_keypad_exit(void) -{ - platform_driver_unregister(&ske_keypad_driver); -} -module_exit(ske_keypad_exit); +module_platform_driver(ske_keypad_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>"); diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 323bcdfff24..6b630d9d3df 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -473,20 +473,7 @@ static struct platform_driver omap_kp_driver = { .owner = THIS_MODULE, }, }; - -static int __init omap_kp_init(void) -{ - printk(KERN_INFO "OMAP Keypad Driver\n"); - return platform_driver_register(&omap_kp_driver); -} - -static void __exit omap_kp_exit(void) -{ - platform_driver_unregister(&omap_kp_driver); -} - -module_init(omap_kp_init); -module_exit(omap_kp_exit); +module_platform_driver(omap_kp_driver); MODULE_AUTHOR("Timo Teräs"); MODULE_DESCRIPTION("OMAP Keypad Driver"); diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index c51a3c4a7fe..d5c5d77f4b8 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -335,18 +335,7 @@ static struct platform_driver omap4_keypad_driver = { .owner = THIS_MODULE, }, }; - -static int __init omap4_keypad_init(void) -{ - return platform_driver_register(&omap4_keypad_driver); -} -module_init(omap4_keypad_init); - -static void __exit omap4_keypad_exit(void) -{ - platform_driver_unregister(&omap4_keypad_driver); -} -module_exit(omap4_keypad_exit); +module_platform_driver(omap4_keypad_driver); MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("OMAP4 Keypad Driver"); diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c index 1f1a5563f60..abe728c7b88 100644 --- a/drivers/input/keyboard/opencores-kbd.c +++ b/drivers/input/keyboard/opencores-kbd.c @@ -163,18 +163,7 @@ static struct platform_driver opencores_kbd_device_driver = { .name = "opencores-kbd", }, }; - -static int __init opencores_kbd_init(void) -{ - return platform_driver_register(&opencores_kbd_device_driver); -} -module_init(opencores_kbd_init); - -static void __exit opencores_kbd_exit(void) -{ - platform_driver_unregister(&opencores_kbd_device_driver); -} -module_exit(opencores_kbd_exit); +module_platform_driver(opencores_kbd_device_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>"); diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index e7cc51d0fb3..01a1c9f8a38 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -780,18 +780,7 @@ static struct platform_driver pmic8xxx_kp_driver = { .pm = &pm8xxx_kp_pm_ops, }, }; - -static int __init pmic8xxx_kp_init(void) -{ - return platform_driver_register(&pmic8xxx_kp_driver); -} -module_init(pmic8xxx_kp_init); - -static void __exit pmic8xxx_kp_exit(void) -{ - platform_driver_unregister(&pmic8xxx_kp_driver); -} -module_exit(pmic8xxx_kp_exit); +module_platform_driver(pmic8xxx_kp_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("PMIC8XXX keypad driver"); diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index eca6ae63de1..29fe1b2be1c 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -602,19 +602,7 @@ static struct platform_driver pxa27x_keypad_driver = { #endif }, }; - -static int __init pxa27x_keypad_init(void) -{ - return platform_driver_register(&pxa27x_keypad_driver); -} - -static void __exit pxa27x_keypad_exit(void) -{ - platform_driver_unregister(&pxa27x_keypad_driver); -} - -module_init(pxa27x_keypad_init); -module_exit(pxa27x_keypad_exit); +module_platform_driver(pxa27x_keypad_driver); MODULE_DESCRIPTION("PXA27x Keypad Controller Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c index 35451bf780c..d7f1134b789 100644 --- a/drivers/input/keyboard/pxa930_rotary.c +++ b/drivers/input/keyboard/pxa930_rotary.c @@ -195,18 +195,7 @@ static struct platform_driver pxa930_rotary_driver = { .probe = pxa930_rotary_probe, .remove = __devexit_p(pxa930_rotary_remove), }; - -static int __init pxa930_rotary_init(void) -{ - return platform_driver_register(&pxa930_rotary_driver); -} -module_init(pxa930_rotary_init); - -static void __exit pxa930_rotary_exit(void) -{ - platform_driver_unregister(&pxa930_rotary_driver); -} -module_exit(pxa930_rotary_exit); +module_platform_driver(pxa930_rotary_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Driver for PXA93x Enhanced Rotary Controller"); diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c index 8a0060cd398..17ba7f9f80f 100644 --- a/drivers/input/keyboard/samsung-keypad.c +++ b/drivers/input/keyboard/samsung-keypad.c @@ -20,11 +20,13 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/of.h> #include <linux/of_gpio.h> #include <linux/sched.h> -#include <plat/keypad.h> +#include <linux/input/samsung-keypad.h> #define SAMSUNG_KEYIFCON 0x00 #define SAMSUNG_KEYIFSTSCLR 0x04 @@ -65,10 +67,12 @@ enum samsung_keypad_type { struct samsung_keypad { struct input_dev *input_dev; + struct platform_device *pdev; struct clk *clk; void __iomem *base; wait_queue_head_t wait; bool stopped; + bool wake_enabled; int irq; enum samsung_keypad_type type; unsigned int row_shift; @@ -155,6 +159,8 @@ static irqreturn_t samsung_keypad_irq(int irq, void *dev_id) unsigned int val; bool key_down; + pm_runtime_get_sync(&keypad->pdev->dev); + do { val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR); /* Clear interrupt. */ @@ -169,6 +175,8 @@ static irqreturn_t samsung_keypad_irq(int irq, void *dev_id) } while (key_down && !keypad->stopped); + pm_runtime_put_sync(&keypad->pdev->dev); + return IRQ_HANDLED; } @@ -176,6 +184,8 @@ static void samsung_keypad_start(struct samsung_keypad *keypad) { unsigned int val; + pm_runtime_get_sync(&keypad->pdev->dev); + /* Tell IRQ thread that it may poll the device. */ keypad->stopped = false; @@ -188,12 +198,16 @@ static void samsung_keypad_start(struct samsung_keypad *keypad) /* KEYIFCOL reg clear. */ writel(0, keypad->base + SAMSUNG_KEYIFCOL); + + pm_runtime_put_sync(&keypad->pdev->dev); } static void samsung_keypad_stop(struct samsung_keypad *keypad) { unsigned int val; + pm_runtime_get_sync(&keypad->pdev->dev); + /* Signal IRQ thread to stop polling and disable the handler. */ keypad->stopped = true; wake_up(&keypad->wait); @@ -214,6 +228,8 @@ static void samsung_keypad_stop(struct samsung_keypad *keypad) * re-enable the handler. */ enable_irq(keypad->irq); + + pm_runtime_put_sync(&keypad->pdev->dev); } static int samsung_keypad_open(struct input_dev *input_dev) @@ -418,9 +434,11 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) } keypad->input_dev = input_dev; + keypad->pdev = pdev; keypad->row_shift = row_shift; keypad->rows = pdata->rows; keypad->cols = pdata->cols; + keypad->stopped = true; init_waitqueue_head(&keypad->wait); if (pdev->dev.of_node) { @@ -467,13 +485,14 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) goto err_put_clk; } + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + pm_runtime_enable(&pdev->dev); + error = input_register_device(keypad->input_dev); if (error) goto err_free_irq; - device_init_wakeup(&pdev->dev, pdata->wakeup); - platform_set_drvdata(pdev, keypad); - if (pdev->dev.of_node) { devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap); devm_kfree(&pdev->dev, (void *)pdata->keymap_data); @@ -483,6 +502,9 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev) err_free_irq: free_irq(keypad->irq, keypad); + pm_runtime_disable(&pdev->dev); + device_init_wakeup(&pdev->dev, 0); + platform_set_drvdata(pdev, NULL); err_put_clk: clk_put(keypad->clk); samsung_keypad_dt_gpio_free(keypad); @@ -499,6 +521,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev) { struct samsung_keypad *keypad = platform_get_drvdata(pdev); + pm_runtime_disable(&pdev->dev); device_init_wakeup(&pdev->dev, 0); platform_set_drvdata(pdev, NULL); @@ -519,11 +542,57 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_RUNTIME +static int samsung_keypad_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + unsigned int val; + int error; + + if (keypad->stopped) + return 0; + + /* This may fail on some SoCs due to lack of controller support */ + error = enable_irq_wake(keypad->irq); + if (!error) + keypad->wake_enabled = true; + + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val |= SAMSUNG_KEYIFCON_WAKEUPEN; + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); + + return 0; +} + +static int samsung_keypad_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + unsigned int val; + + if (keypad->stopped) + return 0; + + clk_enable(keypad->clk); + + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val &= ~SAMSUNG_KEYIFCON_WAKEUPEN; + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + if (keypad->wake_enabled) + disable_irq_wake(keypad->irq); + + return 0; +} +#endif + +#ifdef CONFIG_PM_SLEEP static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad, bool enable) { - struct device *dev = keypad->input_dev->dev.parent; unsigned int val; clk_enable(keypad->clk); @@ -531,11 +600,11 @@ static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad, val = readl(keypad->base + SAMSUNG_KEYIFCON); if (enable) { val |= SAMSUNG_KEYIFCON_WAKEUPEN; - if (device_may_wakeup(dev)) + if (device_may_wakeup(&keypad->pdev->dev)) enable_irq_wake(keypad->irq); } else { val &= ~SAMSUNG_KEYIFCON_WAKEUPEN; - if (device_may_wakeup(dev)) + if (device_may_wakeup(&keypad->pdev->dev)) disable_irq_wake(keypad->irq); } writel(val, keypad->base + SAMSUNG_KEYIFCON); @@ -578,12 +647,13 @@ static int samsung_keypad_resume(struct device *dev) return 0; } +#endif static const struct dev_pm_ops samsung_keypad_pm_ops = { - .suspend = samsung_keypad_suspend, - .resume = samsung_keypad_resume, + SET_SYSTEM_SLEEP_PM_OPS(samsung_keypad_suspend, samsung_keypad_resume) + SET_RUNTIME_PM_OPS(samsung_keypad_runtime_suspend, + samsung_keypad_runtime_resume, NULL) }; -#endif #ifdef CONFIG_OF static const struct of_device_id samsung_keypad_dt_match[] = { @@ -615,27 +685,13 @@ static struct platform_driver samsung_keypad_driver = { .name = "samsung-keypad", .owner = THIS_MODULE, .of_match_table = samsung_keypad_dt_match, -#ifdef CONFIG_PM .pm = &samsung_keypad_pm_ops, -#endif }, .id_table = samsung_keypad_driver_ids, }; - -static int __init samsung_keypad_init(void) -{ - return platform_driver_register(&samsung_keypad_driver); -} -module_init(samsung_keypad_init); - -static void __exit samsung_keypad_exit(void) -{ - platform_driver_unregister(&samsung_keypad_driver); -} -module_exit(samsung_keypad_exit); +module_platform_driver(samsung_keypad_driver); MODULE_DESCRIPTION("Samsung keypad driver"); MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-keypad"); diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 934aeb583b3..da54ad5db15 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -337,19 +337,7 @@ static struct platform_driver sh_keysc_device_driver = { .pm = &sh_keysc_dev_pm_ops, } }; - -static int __init sh_keysc_init(void) -{ - return platform_driver_register(&sh_keysc_device_driver); -} - -static void __exit sh_keysc_exit(void) -{ - platform_driver_unregister(&sh_keysc_device_driver); -} - -module_init(sh_keysc_init); -module_exit(sh_keysc_exit); +module_platform_driver(sh_keysc_device_driver); MODULE_AUTHOR("Magnus Damm"); MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver"); diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index d712dffd215..c88bd63dc9c 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -326,18 +326,7 @@ static struct platform_driver spear_kbd_driver = { #endif }, }; - -static int __init spear_kbd_init(void) -{ - return platform_driver_register(&spear_kbd_driver); -} -module_init(spear_kbd_init); - -static void __exit spear_kbd_exit(void) -{ - platform_driver_unregister(&spear_kbd_driver); -} -module_exit(spear_kbd_exit); +module_platform_driver(spear_kbd_driver); MODULE_AUTHOR("Rajeev Kumar"); MODULE_DESCRIPTION("SPEAr Keyboard Driver"); diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c index ab7610ca10e..9397cf9c625 100644 --- a/drivers/input/keyboard/stmpe-keypad.c +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -368,18 +368,7 @@ static struct platform_driver stmpe_keypad_driver = { .probe = stmpe_keypad_probe, .remove = __devexit_p(stmpe_keypad_remove), }; - -static int __init stmpe_keypad_init(void) -{ - return platform_driver_register(&stmpe_keypad_driver); -} -module_init(stmpe_keypad_init); - -static void __exit stmpe_keypad_exit(void) -{ - platform_driver_unregister(&stmpe_keypad_driver); -} -module_exit(stmpe_keypad_exit); +module_platform_driver(stmpe_keypad_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("STMPExxxx keypad driver"); diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index f60c9e82f20..2dee3e4e7c6 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -74,11 +74,13 @@ /** * struct tc_keypad - data structure used by keypad driver + * @tc3589x: pointer to tc35893 * @input: pointer to input device object * @board: keypad platform device * @krow: number of rows * @kcol: number of coloumns * @keymap: matrix scan code table for keycodes + * @keypad_stopped: holds keypad status */ struct tc_keypad { struct tc3589x *tc3589x; @@ -453,18 +455,7 @@ static struct platform_driver tc3589x_keypad_driver = { .probe = tc3589x_keypad_probe, .remove = __devexit_p(tc3589x_keypad_remove), }; - -static int __init tc3589x_keypad_init(void) -{ - return platform_driver_register(&tc3589x_keypad_driver); -} -module_init(tc3589x_keypad_init); - -static void __exit tc3589x_keypad_exit(void) -{ - return platform_driver_unregister(&tc3589x_keypad_driver); -} -module_exit(tc3589x_keypad_exit); +module_platform_driver(tc3589x_keypad_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer"); diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c new file mode 100644 index 00000000000..958ec107bfb --- /dev/null +++ b/drivers/input/keyboard/tca8418_keypad.c @@ -0,0 +1,430 @@ +/* + * Driver for TCA8418 I2C keyboard + * + * Copyright (C) 2011 Fuel7, Inc. All rights reserved. + * + * Author: Kyle Manna <kyle.manna@fuel7.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * If you can't comply with GPLv2, alternative licensing terms may be + * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary + * alternative licensing inquiries. + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/tca8418_keypad.h> + +/* TCA8418 hardware limits */ +#define TCA8418_MAX_ROWS 8 +#define TCA8418_MAX_COLS 10 + +/* TCA8418 register offsets */ +#define REG_CFG 0x01 +#define REG_INT_STAT 0x02 +#define REG_KEY_LCK_EC 0x03 +#define REG_KEY_EVENT_A 0x04 +#define REG_KEY_EVENT_B 0x05 +#define REG_KEY_EVENT_C 0x06 +#define REG_KEY_EVENT_D 0x07 +#define REG_KEY_EVENT_E 0x08 +#define REG_KEY_EVENT_F 0x09 +#define REG_KEY_EVENT_G 0x0A +#define REG_KEY_EVENT_H 0x0B +#define REG_KEY_EVENT_I 0x0C +#define REG_KEY_EVENT_J 0x0D +#define REG_KP_LCK_TIMER 0x0E +#define REG_UNLOCK1 0x0F +#define REG_UNLOCK2 0x10 +#define REG_GPIO_INT_STAT1 0x11 +#define REG_GPIO_INT_STAT2 0x12 +#define REG_GPIO_INT_STAT3 0x13 +#define REG_GPIO_DAT_STAT1 0x14 +#define REG_GPIO_DAT_STAT2 0x15 +#define REG_GPIO_DAT_STAT3 0x16 +#define REG_GPIO_DAT_OUT1 0x17 +#define REG_GPIO_DAT_OUT2 0x18 +#define REG_GPIO_DAT_OUT3 0x19 +#define REG_GPIO_INT_EN1 0x1A +#define REG_GPIO_INT_EN2 0x1B +#define REG_GPIO_INT_EN3 0x1C +#define REG_KP_GPIO1 0x1D +#define REG_KP_GPIO2 0x1E +#define REG_KP_GPIO3 0x1F +#define REG_GPI_EM1 0x20 +#define REG_GPI_EM2 0x21 +#define REG_GPI_EM3 0x22 +#define REG_GPIO_DIR1 0x23 +#define REG_GPIO_DIR2 0x24 +#define REG_GPIO_DIR3 0x25 +#define REG_GPIO_INT_LVL1 0x26 +#define REG_GPIO_INT_LVL2 0x27 +#define REG_GPIO_INT_LVL3 0x28 +#define REG_DEBOUNCE_DIS1 0x29 +#define REG_DEBOUNCE_DIS2 0x2A +#define REG_DEBOUNCE_DIS3 0x2B +#define REG_GPIO_PULL1 0x2C +#define REG_GPIO_PULL2 0x2D +#define REG_GPIO_PULL3 0x2E + +/* TCA8418 bit definitions */ +#define CFG_AI BIT(7) +#define CFG_GPI_E_CFG BIT(6) +#define CFG_OVR_FLOW_M BIT(5) +#define CFG_INT_CFG BIT(4) +#define CFG_OVR_FLOW_IEN BIT(3) +#define CFG_K_LCK_IEN BIT(2) +#define CFG_GPI_IEN BIT(1) +#define CFG_KE_IEN BIT(0) + +#define INT_STAT_CAD_INT BIT(4) +#define INT_STAT_OVR_FLOW_INT BIT(3) +#define INT_STAT_K_LCK_INT BIT(2) +#define INT_STAT_GPI_INT BIT(1) +#define INT_STAT_K_INT BIT(0) + +/* TCA8418 register masks */ +#define KEY_LCK_EC_KEC 0x7 +#define KEY_EVENT_CODE 0x7f +#define KEY_EVENT_VALUE 0x80 + + +static const struct i2c_device_id tca8418_id[] = { + { TCA8418_NAME, 8418, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tca8418_id); + +struct tca8418_keypad { + unsigned int rows; + unsigned int cols; + unsigned int keypad_mask; /* Mask for keypad col/rol regs */ + unsigned int irq; + unsigned int row_shift; + + struct i2c_client *client; + struct input_dev *input; + + /* Flexible array member, must be at end of struct */ + unsigned short keymap[]; +}; + +/* + * Write a byte to the TCA8418 + */ +static int tca8418_write_byte(struct tca8418_keypad *keypad_data, + int reg, u8 val) +{ + int error; + + error = i2c_smbus_write_byte_data(keypad_data->client, reg, val); + if (error < 0) { + dev_err(&keypad_data->client->dev, + "%s failed, reg: %d, val: %d, error: %d\n", + __func__, reg, val, error); + return error; + } + + return 0; +} + +/* + * Read a byte from the TCA8418 + */ +static int tca8418_read_byte(struct tca8418_keypad *keypad_data, + int reg, u8 *val) +{ + int error; + + error = i2c_smbus_read_byte_data(keypad_data->client, reg); + if (error < 0) { + dev_err(&keypad_data->client->dev, + "%s failed, reg: %d, error: %d\n", + __func__, reg, error); + return error; + } + + *val = (u8)error; + + return 0; +} + +static void tca8418_read_keypad(struct tca8418_keypad *keypad_data) +{ + int error, col, row; + u8 reg, state, code; + + /* Initial read of the key event FIFO */ + error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, ®); + + /* Assume that key code 0 signifies empty FIFO */ + while (error >= 0 && reg > 0) { + state = reg & KEY_EVENT_VALUE; + code = reg & KEY_EVENT_CODE; + + row = code / TCA8418_MAX_COLS; + col = code % TCA8418_MAX_COLS; + + row = (col) ? row : row - 1; + col = (col) ? col - 1 : TCA8418_MAX_COLS - 1; + + code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift); + input_event(keypad_data->input, EV_MSC, MSC_SCAN, code); + input_report_key(keypad_data->input, + keypad_data->keymap[code], state); + + /* Read for next loop */ + error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, ®); + } + + if (error < 0) + dev_err(&keypad_data->client->dev, + "unable to read REG_KEY_EVENT_A\n"); + + input_sync(keypad_data->input); +} + +/* + * Threaded IRQ handler and this can (and will) sleep. + */ +static irqreturn_t tca8418_irq_handler(int irq, void *dev_id) +{ + struct tca8418_keypad *keypad_data = dev_id; + u8 reg; + int error; + + error = tca8418_read_byte(keypad_data, REG_INT_STAT, ®); + if (error) { + dev_err(&keypad_data->client->dev, + "unable to read REG_INT_STAT\n"); + goto exit; + } + + if (reg & INT_STAT_OVR_FLOW_INT) + dev_warn(&keypad_data->client->dev, "overflow occurred\n"); + + if (reg & INT_STAT_K_INT) + tca8418_read_keypad(keypad_data); + +exit: + /* Clear all interrupts, even IRQs we didn't check (GPI, CAD, LCK) */ + reg = 0xff; + error = tca8418_write_byte(keypad_data, REG_INT_STAT, reg); + if (error) + dev_err(&keypad_data->client->dev, + "unable to clear REG_INT_STAT\n"); + + return IRQ_HANDLED; +} + +/* + * Configure the TCA8418 for keypad operation + */ +static int __devinit tca8418_configure(struct tca8418_keypad *keypad_data) +{ + int reg, error; + + /* Write config register, if this fails assume device not present */ + error = tca8418_write_byte(keypad_data, REG_CFG, + CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN); + if (error < 0) + return -ENODEV; + + + /* Assemble a mask for row and column registers */ + reg = ~(~0 << keypad_data->rows); + reg += (~(~0 << keypad_data->cols)) << 8; + keypad_data->keypad_mask = reg; + + /* Set registers to keypad mode */ + error |= tca8418_write_byte(keypad_data, REG_KP_GPIO1, reg); + error |= tca8418_write_byte(keypad_data, REG_KP_GPIO2, reg >> 8); + error |= tca8418_write_byte(keypad_data, REG_KP_GPIO3, reg >> 16); + + /* Enable column debouncing */ + error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS1, reg); + error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8); + error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16); + + return error; +} + +static int __devinit tca8418_keypad_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct tca8418_keypad_platform_data *pdata = + client->dev.platform_data; + struct tca8418_keypad *keypad_data; + struct input_dev *input; + int error, row_shift, max_keys; + + /* Copy the platform data */ + if (!pdata) { + dev_dbg(&client->dev, "no platform data\n"); + return -EINVAL; + } + + if (!pdata->keymap_data) { + dev_err(&client->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!pdata->rows || pdata->rows > TCA8418_MAX_ROWS) { + dev_err(&client->dev, "invalid rows\n"); + return -EINVAL; + } + + if (!pdata->cols || pdata->cols > TCA8418_MAX_COLS) { + dev_err(&client->dev, "invalid columns\n"); + return -EINVAL; + } + + /* Check i2c driver capabilities */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) { + dev_err(&client->dev, "%s adapter not supported\n", + dev_driver_string(&client->adapter->dev)); + return -ENODEV; + } + + row_shift = get_count_order(pdata->cols); + max_keys = pdata->rows << row_shift; + + /* Allocate memory for keypad_data, keymap and input device */ + keypad_data = kzalloc(sizeof(*keypad_data) + + max_keys * sizeof(keypad_data->keymap[0]), GFP_KERNEL); + if (!keypad_data) + return -ENOMEM; + + keypad_data->rows = pdata->rows; + keypad_data->cols = pdata->cols; + keypad_data->client = client; + keypad_data->row_shift = row_shift; + + /* Initialize the chip or fail if chip isn't present */ + error = tca8418_configure(keypad_data); + if (error < 0) + goto fail1; + + /* Configure input device */ + input = input_allocate_device(); + if (!input) { + error = -ENOMEM; + goto fail1; + } + keypad_data->input = input; + + input->name = client->name; + input->dev.parent = &client->dev; + + input->id.bustype = BUS_I2C; + input->id.vendor = 0x0001; + input->id.product = 0x001; + input->id.version = 0x0001; + + input->keycode = keypad_data->keymap; + input->keycodesize = sizeof(keypad_data->keymap[0]); + input->keycodemax = max_keys; + + __set_bit(EV_KEY, input->evbit); + if (pdata->rep) + __set_bit(EV_REP, input->evbit); + + input_set_capability(input, EV_MSC, MSC_SCAN); + + input_set_drvdata(input, keypad_data); + + matrix_keypad_build_keymap(pdata->keymap_data, row_shift, + input->keycode, input->keybit); + + if (pdata->irq_is_gpio) + client->irq = gpio_to_irq(client->irq); + + error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler, + IRQF_TRIGGER_FALLING, + client->name, keypad_data); + if (error) { + dev_dbg(&client->dev, + "Unable to claim irq %d; error %d\n", + client->irq, error); + goto fail2; + } + + error = input_register_device(input); + if (error) { + dev_dbg(&client->dev, + "Unable to register input device, error: %d\n", error); + goto fail3; + } + + i2c_set_clientdata(client, keypad_data); + return 0; + +fail3: + free_irq(client->irq, keypad_data); +fail2: + input_free_device(input); +fail1: + kfree(keypad_data); + return error; +} + +static int __devexit tca8418_keypad_remove(struct i2c_client *client) +{ + struct tca8418_keypad *keypad_data = i2c_get_clientdata(client); + + free_irq(keypad_data->client->irq, keypad_data); + + input_unregister_device(keypad_data->input); + + kfree(keypad_data); + + return 0; +} + + +static struct i2c_driver tca8418_keypad_driver = { + .driver = { + .name = TCA8418_NAME, + .owner = THIS_MODULE, + }, + .probe = tca8418_keypad_probe, + .remove = __devexit_p(tca8418_keypad_remove), + .id_table = tca8418_id, +}; + +static int __init tca8418_keypad_init(void) +{ + return i2c_add_driver(&tca8418_keypad_driver); +} +subsys_initcall(tca8418_keypad_init); + +static void __exit tca8418_keypad_exit(void) +{ + i2c_del_driver(&tca8418_keypad_driver); +} +module_exit(tca8418_keypad_exit); + +MODULE_AUTHOR("Kyle Manna <kyle.manna@fuel7.com>"); +MODULE_DESCRIPTION("Keypad driver for TCA8418"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index cf3228b0ab9..a136e2e832b 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/interrupt.h> +#include <linux/of.h> #include <linux/clk.h> #include <linux/slab.h> #include <mach/clk.h> @@ -52,6 +53,7 @@ /* KBC Interrupt Register */ #define KBC_INT_0 0x4 #define KBC_INT_FIFO_CNT_INT_STATUS (1 << 2) +#define KBC_INT_KEYPRESS_INT_STATUS (1 << 0) #define KBC_ROW_CFG0_0 0x8 #define KBC_COL_CFG0_0 0x18 @@ -74,15 +76,17 @@ struct tegra_kbc { unsigned int cp_to_wkup_dly; bool use_fn_map; bool use_ghost_filter; + bool keypress_caused_wake; const struct tegra_kbc_platform_data *pdata; unsigned short keycode[KBC_MAX_KEY * 2]; unsigned short current_keys[KBC_MAX_KPENT]; unsigned int num_pressed_keys; + u32 wakeup_key; struct timer_list timer; struct clk *clk; }; -static const u32 tegra_kbc_default_keymap[] = { +static const u32 tegra_kbc_default_keymap[] __devinitdata = { KEY(0, 2, KEY_W), KEY(0, 3, KEY_S), KEY(0, 4, KEY_A), @@ -217,7 +221,8 @@ static const u32 tegra_kbc_default_keymap[] = { KEY(31, 4, KEY_HELP), }; -static const struct matrix_keymap_data tegra_kbc_default_keymap_data = { +static const +struct matrix_keymap_data tegra_kbc_default_keymap_data __devinitdata = { .keymap = tegra_kbc_default_keymap, .keymap_size = ARRAY_SIZE(tegra_kbc_default_keymap), }; @@ -409,6 +414,9 @@ static irqreturn_t tegra_kbc_isr(int irq, void *args) */ tegra_kbc_set_fifo_interrupt(kbc, false); mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies); + } else if (val & KBC_INT_KEYPRESS_INT_STATUS) { + /* We can be here only through system resume path */ + kbc->keypress_caused_wake = true; } spin_unlock_irqrestore(&kbc->lock, flags); @@ -576,6 +584,56 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata, return true; } +#ifdef CONFIG_OF +static struct tegra_kbc_platform_data * __devinit +tegra_kbc_dt_parse_pdata(struct platform_device *pdev) +{ + struct tegra_kbc_platform_data *pdata; + struct device_node *np = pdev->dev.of_node; + + if (!np) + return NULL; + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + if (!of_property_read_u32(np, "debounce-delay", &prop)) + pdata->debounce_cnt = prop; + + if (!of_property_read_u32(np, "repeat-delay", &prop)) + pdata->repeat_cnt = prop; + + if (of_find_property(np, "needs-ghost-filter", NULL)) + pdata->use_ghost_filter = true; + + if (of_find_property(np, "wakeup-source", NULL)) + pdata->wakeup = true; + + /* + * All currently known keymaps with device tree support use the same + * pin_cfg, so set it up here. + */ + for (i = 0; i < KBC_MAX_ROW; i++) { + pdata->pin_cfg[i].num = i; + pdata->pin_cfg[i].is_row = true; + } + + for (i = 0; i < KBC_MAX_COL; i++) { + pdata->pin_cfg[KBC_MAX_ROW + i].num = i; + pdata->pin_cfg[KBC_MAX_ROW + i].is_row = false; + } + + return pdata; +} +#else +static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata( + struct platform_device *pdev) +{ + return NULL; +} +#endif + static int __devinit tegra_kbc_probe(struct platform_device *pdev) { const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data; @@ -590,21 +648,28 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) unsigned int scan_time_rows; if (!pdata) - return -EINVAL; + pdata = tegra_kbc_dt_parse_pdata(pdev); - if (!tegra_kbc_check_pin_cfg(pdata, &pdev->dev, &num_rows)) + if (!pdata) return -EINVAL; + if (!tegra_kbc_check_pin_cfg(pdata, &pdev->dev, &num_rows)) { + err = -EINVAL; + goto err_free_pdata; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "failed to get I/O memory\n"); - return -ENXIO; + err = -ENXIO; + goto err_free_pdata; } irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "failed to get keyboard IRQ\n"); - return -ENXIO; + err = -ENXIO; + goto err_free_pdata; } kbc = kzalloc(sizeof(*kbc), GFP_KERNEL); @@ -674,9 +739,10 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data; matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT, input_dev->keycode, input_dev->keybit); + kbc->wakeup_key = pdata->wakeup_key; - err = request_irq(kbc->irq, tegra_kbc_isr, IRQF_TRIGGER_HIGH, - pdev->name, kbc); + err = request_irq(kbc->irq, tegra_kbc_isr, + IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc); if (err) { dev_err(&pdev->dev, "failed to request keyboard IRQ\n"); goto err_put_clk; @@ -706,6 +772,9 @@ err_free_mem_region: err_free_mem: input_free_device(input_dev); kfree(kbc); +err_free_pdata: + if (!pdev->dev.platform_data) + kfree(pdata); return err; } @@ -715,6 +784,8 @@ static int __devexit tegra_kbc_remove(struct platform_device *pdev) struct tegra_kbc *kbc = platform_get_drvdata(pdev); struct resource *res; + platform_set_drvdata(pdev, NULL); + free_irq(kbc->irq, pdev); clk_put(kbc->clk); @@ -723,9 +794,14 @@ static int __devexit tegra_kbc_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, resource_size(res)); - kfree(kbc); + /* + * If we do not have platform data attached to the device we + * allocated it ourselves and thus need to free it. + */ + if (!pdev->dev.platform_data) + kfree(kbc->pdata); - platform_set_drvdata(pdev, NULL); + kfree(kbc); return 0; } @@ -754,6 +830,8 @@ static int tegra_kbc_suspend(struct device *dev) tegra_kbc_setup_wakekeys(kbc, true); msleep(30); + kbc->keypress_caused_wake = false; + enable_irq(kbc->irq); enable_irq_wake(kbc->irq); } else { if (kbc->idev->users) @@ -780,7 +858,19 @@ static int tegra_kbc_resume(struct device *dev) tegra_kbc_set_fifo_interrupt(kbc, true); - enable_irq(kbc->irq); + if (kbc->keypress_caused_wake && kbc->wakeup_key) { + /* + * We can't report events directly from the ISR + * because timekeeping is stopped when processing + * wakeup request and we get a nasty warning when + * we try to call do_gettimeofday() in evdev + * handler. + */ + input_report_key(kbc->idev, kbc->wakeup_key, 1); + input_sync(kbc->idev); + input_report_key(kbc->idev, kbc->wakeup_key, 0); + input_sync(kbc->idev); + } } else { if (kbc->idev->users) err = tegra_kbc_start(kbc); @@ -793,6 +883,12 @@ static int tegra_kbc_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, tegra_kbc_suspend, tegra_kbc_resume); +static const struct of_device_id tegra_kbc_of_match[] = { + { .compatible = "nvidia,tegra20-kbc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra_kbc_of_match); + static struct platform_driver tegra_kbc_driver = { .probe = tegra_kbc_probe, .remove = __devexit_p(tegra_kbc_remove), @@ -800,20 +896,10 @@ static struct platform_driver tegra_kbc_driver = { .name = "tegra-kbc", .owner = THIS_MODULE, .pm = &tegra_kbc_pm_ops, + .of_match_table = tegra_kbc_of_match, }, }; - -static void __exit tegra_kbc_exit(void) -{ - platform_driver_unregister(&tegra_kbc_driver); -} -module_exit(tegra_kbc_exit); - -static int __init tegra_kbc_init(void) -{ - return platform_driver_register(&tegra_kbc_driver); -} -module_init(tegra_kbc_init); +module_platform_driver(tegra_kbc_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Rakesh Iyer <riyer@nvidia.com>"); diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c index 66e55e5cfdd..fb39c94b6fd 100644 --- a/drivers/input/keyboard/tnetv107x-keypad.c +++ b/drivers/input/keyboard/tnetv107x-keypad.c @@ -322,19 +322,7 @@ static struct platform_driver keypad_driver = { .driver.name = "tnetv107x-keypad", .driver.owner = THIS_MODULE, }; - -static int __init keypad_init(void) -{ - return platform_driver_register(&keypad_driver); -} - -static void __exit keypad_exit(void) -{ - platform_driver_unregister(&keypad_driver); -} - -module_init(keypad_init); -module_exit(keypad_exit); +module_platform_driver(keypad_driver); MODULE_AUTHOR("Cyril Chemparathy"); MODULE_DESCRIPTION("TNETV107X Keypad Driver"); diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c index a26922cf0e8..a588578037e 100644 --- a/drivers/input/keyboard/twl4030_keypad.c +++ b/drivers/input/keyboard/twl4030_keypad.c @@ -460,18 +460,7 @@ static struct platform_driver twl4030_kp_driver = { .owner = THIS_MODULE, }, }; - -static int __init twl4030_kp_init(void) -{ - return platform_driver_register(&twl4030_kp_driver); -} -module_init(twl4030_kp_init); - -static void __exit twl4030_kp_exit(void) -{ - platform_driver_unregister(&twl4030_kp_driver); -} -module_exit(twl4030_kp_exit); +module_platform_driver(twl4030_kp_driver); MODULE_AUTHOR("Texas Instruments"); MODULE_DESCRIPTION("TWL4030 Keypad Driver"); diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c index 318586dadac..99bbb7e775a 100644 --- a/drivers/input/keyboard/w90p910_keypad.c +++ b/drivers/input/keyboard/w90p910_keypad.c @@ -262,19 +262,7 @@ static struct platform_driver w90p910_keypad_driver = { .owner = THIS_MODULE, }, }; - -static int __init w90p910_keypad_init(void) -{ - return platform_driver_register(&w90p910_keypad_driver); -} - -static void __exit w90p910_keypad_exit(void) -{ - platform_driver_unregister(&w90p910_keypad_driver); -} - -module_init(w90p910_keypad_init); -module_exit(w90p910_keypad_exit); +module_platform_driver(w90p910_keypad_driver); MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); MODULE_DESCRIPTION("w90p910 keypad driver"); diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c index 3dca3c14510..f2e0cbc5ab6 100644 --- a/drivers/input/misc/88pm860x_onkey.c +++ b/drivers/input/misc/88pm860x_onkey.c @@ -137,18 +137,7 @@ static struct platform_driver pm860x_onkey_driver = { .probe = pm860x_onkey_probe, .remove = __devexit_p(pm860x_onkey_remove), }; - -static int __init pm860x_onkey_init(void) -{ - return platform_driver_register(&pm860x_onkey_driver); -} -module_init(pm860x_onkey_init); - -static void __exit pm860x_onkey_exit(void) -{ - platform_driver_unregister(&pm860x_onkey_driver); -} -module_exit(pm860x_onkey_exit); +module_platform_driver(pm860x_onkey_driver); MODULE_DESCRIPTION("Marvell 88PM860x ONKEY driver"); MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 22d875fde53..7b46781c30c 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -179,6 +179,31 @@ config INPUT_APANEL To compile this driver as a module, choose M here: the module will be called apanel. +config INPUT_GP2A + tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver" + depends on I2C + depends on GENERIC_GPIO + help + Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip + hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called gp2ap002a00f. + +config INPUT_GPIO_TILT_POLLED + tristate "Polled GPIO tilt switch" + depends on GENERIC_GPIO + select INPUT_POLLDEV + help + This driver implements support for tilt switches connected + to GPIO pins that are not capable of generating interrupts. + + The list of gpios to use and the mapping of their states + to specific angles is done via platform data. + + To compile this driver as a module, choose M here: the + module will be called gpio_tilt_polled. + config INPUT_IXP4XX_BEEPER tristate "IXP4XX Beeper support" depends on ARCH_IXP4XX diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index a244fc6a781..46671a875b9 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -22,6 +22,8 @@ obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o +obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o +obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c index 3d3288a78fd..79d90163363 100644 --- a/drivers/input/misc/ab8500-ponkey.c +++ b/drivers/input/misc/ab8500-ponkey.c @@ -139,18 +139,7 @@ static struct platform_driver ab8500_ponkey_driver = { .probe = ab8500_ponkey_probe, .remove = __devexit_p(ab8500_ponkey_remove), }; - -static int __init ab8500_ponkey_init(void) -{ - return platform_driver_register(&ab8500_ponkey_driver); -} -module_init(ab8500_ponkey_init); - -static void __exit ab8500_ponkey_exit(void) -{ - platform_driver_unregister(&ab8500_ponkey_driver); -} -module_exit(ab8500_ponkey_exit); +module_platform_driver(ab8500_ponkey_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>"); diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c index f29de22fdda..34d401efd4a 100644 --- a/drivers/input/misc/adxl34x-spi.c +++ b/drivers/input/misc/adxl34x-spi.c @@ -122,7 +122,6 @@ static SIMPLE_DEV_PM_OPS(adxl34x_spi_pm, adxl34x_spi_suspend, static struct spi_driver adxl34x_driver = { .driver = { .name = "adxl34x", - .bus = &spi_bus_type, .owner = THIS_MODULE, .pm = &adxl34x_spi_pm, }, diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c index 09244804fb9..1cf72fe513e 100644 --- a/drivers/input/misc/adxl34x.c +++ b/drivers/input/misc/adxl34x.c @@ -452,10 +452,10 @@ static ssize_t adxl34x_disable_store(struct device *dev, const char *buf, size_t count) { struct adxl34x *ac = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtouint(buf, 10, &val); if (error) return error; @@ -541,10 +541,10 @@ static ssize_t adxl34x_rate_store(struct device *dev, const char *buf, size_t count) { struct adxl34x *ac = dev_get_drvdata(dev); - unsigned long val; + unsigned char val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtou8(buf, 10, &val); if (error) return error; @@ -576,10 +576,10 @@ static ssize_t adxl34x_autosleep_store(struct device *dev, const char *buf, size_t count) { struct adxl34x *ac = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtouint(buf, 10, &val); if (error) return error; @@ -623,13 +623,13 @@ static ssize_t adxl34x_write_store(struct device *dev, const char *buf, size_t count) { struct adxl34x *ac = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; /* * This allows basic ADXL register write access for debug purposes. */ - error = strict_strtoul(buf, 16, &val); + error = kstrtouint(buf, 16, &val); if (error) return error; diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index 874a51c2fbb..f63341f20b9 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -42,13 +42,13 @@ static int ati_remote2_set_mask(const char *val, const struct kernel_param *kp, unsigned int max) { - unsigned long mask; + unsigned int mask; int ret; if (!val) return -EINVAL; - ret = strict_strtoul(val, 0, &mask); + ret = kstrtouint(val, 0, &mask); if (ret) return ret; @@ -720,11 +720,12 @@ static ssize_t ati_remote2_store_channel_mask(struct device *dev, struct usb_device *udev = to_usb_device(dev); struct usb_interface *intf = usb_ifnum_to_if(udev, 0); struct ati_remote2 *ar2 = usb_get_intfdata(intf); - unsigned long mask; + unsigned int mask; int r; - if (strict_strtoul(buf, 0, &mask)) - return -EINVAL; + r = kstrtouint(buf, 0, &mask); + if (r) + return r; if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK) return -EINVAL; @@ -769,10 +770,12 @@ static ssize_t ati_remote2_store_mode_mask(struct device *dev, struct usb_device *udev = to_usb_device(dev); struct usb_interface *intf = usb_ifnum_to_if(udev, 0); struct ati_remote2 *ar2 = usb_get_intfdata(intf); - unsigned long mask; + unsigned int mask; + int err; - if (strict_strtoul(buf, 0, &mask)) - return -EINVAL; + err = kstrtouint(buf, 0, &mask); + if (err) + return err; if (mask & ~ATI_REMOTE2_MAX_MODE_MASK) return -EINVAL; diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c index d00edc9f39d..1c4146fccfd 100644 --- a/drivers/input/misc/bfin_rotary.c +++ b/drivers/input/misc/bfin_rotary.c @@ -264,18 +264,7 @@ static struct platform_driver bfin_rotary_device_driver = { #endif }, }; - -static int __init bfin_rotary_init(void) -{ - return platform_driver_register(&bfin_rotary_device_driver); -} -module_init(bfin_rotary_init); - -static void __exit bfin_rotary_exit(void) -{ - platform_driver_unregister(&bfin_rotary_device_driver); -} -module_exit(bfin_rotary_exit); +module_platform_driver(bfin_rotary_device_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c index fd8407a2963..53e43d29514 100644 --- a/drivers/input/misc/cobalt_btns.c +++ b/drivers/input/misc/cobalt_btns.c @@ -163,16 +163,4 @@ static struct platform_driver cobalt_buttons_driver = { .owner = THIS_MODULE, }, }; - -static int __init cobalt_buttons_init(void) -{ - return platform_driver_register(&cobalt_buttons_driver); -} - -static void __exit cobalt_buttons_exit(void) -{ - platform_driver_unregister(&cobalt_buttons_driver); -} - -module_init(cobalt_buttons_init); -module_exit(cobalt_buttons_exit); +module_platform_driver(cobalt_buttons_driver); diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index 7283dd2a1ad..35083c6836c 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -267,17 +267,6 @@ static struct platform_driver dm355evm_keys_driver = { .name = "dm355evm_keys", }, }; - -static int __init dm355evm_keys_init(void) -{ - return platform_driver_register(&dm355evm_keys_driver); -} -module_init(dm355evm_keys_init); - -static void __exit dm355evm_keys_exit(void) -{ - platform_driver_unregister(&dm355evm_keys_driver); -} -module_exit(dm355evm_keys_exit); +module_platform_driver(dm355evm_keys_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c new file mode 100644 index 00000000000..71fba8c2fc6 --- /dev/null +++ b/drivers/input/misc/gp2ap002a00f.c @@ -0,0 +1,299 @@ +/* + * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc. + * + * Author: Courtney Cavin <courtney.cavin@sonyericsson.com> + * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/input/gp2ap002a00f.h> + +struct gp2a_data { + struct input_dev *input; + const struct gp2a_platform_data *pdata; + struct i2c_client *i2c_client; +}; + +enum gp2a_addr { + GP2A_ADDR_PROX = 0x0, + GP2A_ADDR_GAIN = 0x1, + GP2A_ADDR_HYS = 0x2, + GP2A_ADDR_CYCLE = 0x3, + GP2A_ADDR_OPMOD = 0x4, + GP2A_ADDR_CON = 0x6 +}; + +enum gp2a_controls { + /* Software Shutdown control: 0 = shutdown, 1 = normal operation */ + GP2A_CTRL_SSD = 0x01 +}; + +static int gp2a_report(struct gp2a_data *dt) +{ + int vo = gpio_get_value(dt->pdata->vout_gpio); + + input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo); + input_sync(dt->input); + + return 0; +} + +static irqreturn_t gp2a_irq(int irq, void *handle) +{ + struct gp2a_data *dt = handle; + + gp2a_report(dt); + + return IRQ_HANDLED; +} + +static int gp2a_enable(struct gp2a_data *dt) +{ + return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD, + GP2A_CTRL_SSD); +} + +static int gp2a_disable(struct gp2a_data *dt) +{ + return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD, + 0x00); +} + +static int gp2a_device_open(struct input_dev *dev) +{ + struct gp2a_data *dt = input_get_drvdata(dev); + int error; + + error = gp2a_enable(dt); + if (error < 0) { + dev_err(&dt->i2c_client->dev, + "unable to activate, err %d\n", error); + return error; + } + + gp2a_report(dt); + + return 0; +} + +static void gp2a_device_close(struct input_dev *dev) +{ + struct gp2a_data *dt = input_get_drvdata(dev); + int error; + + error = gp2a_disable(dt); + if (error < 0) + dev_err(&dt->i2c_client->dev, + "unable to deactivate, err %d\n", error); +} + +static int __devinit gp2a_initialize(struct gp2a_data *dt) +{ + int error; + + error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN, + 0x08); + if (error < 0) + return error; + + error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS, + 0xc2); + if (error < 0) + return error; + + error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE, + 0x04); + if (error < 0) + return error; + + error = gp2a_disable(dt); + + return error; +} + +static int __devinit gp2a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct gp2a_platform_data *pdata = client->dev.platform_data; + struct gp2a_data *dt; + int error; + + if (!pdata) + return -EINVAL; + + if (pdata->hw_setup) { + error = pdata->hw_setup(client); + if (error < 0) + return error; + } + + error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME); + if (error) + goto err_hw_shutdown; + + dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL); + if (!dt) { + error = -ENOMEM; + goto err_free_gpio; + } + + dt->pdata = pdata; + dt->i2c_client = client; + + error = gp2a_initialize(dt); + if (error < 0) + goto err_free_mem; + + dt->input = input_allocate_device(); + if (!dt->input) { + error = -ENOMEM; + goto err_free_mem; + } + + input_set_drvdata(dt->input, dt); + + dt->input->open = gp2a_device_open; + dt->input->close = gp2a_device_close; + dt->input->name = GP2A_I2C_NAME; + dt->input->id.bustype = BUS_I2C; + dt->input->dev.parent = &client->dev; + + input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY); + + error = request_threaded_irq(client->irq, NULL, gp2a_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + GP2A_I2C_NAME, dt); + if (error) { + dev_err(&client->dev, "irq request failed\n"); + goto err_free_input_dev; + } + + error = input_register_device(dt->input); + if (error) { + dev_err(&client->dev, "device registration failed\n"); + goto err_free_irq; + } + + device_init_wakeup(&client->dev, pdata->wakeup); + i2c_set_clientdata(client, dt); + + return 0; + +err_free_irq: + free_irq(client->irq, dt); +err_free_input_dev: + input_free_device(dt->input); +err_free_mem: + kfree(dt); +err_free_gpio: + gpio_free(pdata->vout_gpio); +err_hw_shutdown: + if (pdata->hw_shutdown) + pdata->hw_shutdown(client); + return error; +} + +static int __devexit gp2a_remove(struct i2c_client *client) +{ + struct gp2a_data *dt = i2c_get_clientdata(client); + const struct gp2a_platform_data *pdata = dt->pdata; + + device_init_wakeup(&client->dev, false); + + free_irq(client->irq, dt); + + input_unregister_device(dt->input); + kfree(dt); + + gpio_free(pdata->vout_gpio); + + if (pdata->hw_shutdown) + pdata->hw_shutdown(client); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int gp2a_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gp2a_data *dt = i2c_get_clientdata(client); + int retval = 0; + + if (device_may_wakeup(&client->dev)) { + enable_irq_wake(client->irq); + } else { + mutex_lock(&dt->input->mutex); + if (dt->input->users) + retval = gp2a_disable(dt); + mutex_unlock(&dt->input->mutex); + } + + return retval; +} + +static int gp2a_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct gp2a_data *dt = i2c_get_clientdata(client); + int retval = 0; + + if (device_may_wakeup(&client->dev)) { + disable_irq_wake(client->irq); + } else { + mutex_lock(&dt->input->mutex); + if (dt->input->users) + retval = gp2a_enable(dt); + mutex_unlock(&dt->input->mutex); + } + + return retval; +} +#endif + +static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume); + +static const struct i2c_device_id gp2a_i2c_id[] = { + { GP2A_I2C_NAME, 0 }, + { } +}; + +static struct i2c_driver gp2a_i2c_driver = { + .driver = { + .name = GP2A_I2C_NAME, + .owner = THIS_MODULE, + .pm = &gp2a_pm, + }, + .probe = gp2a_probe, + .remove = __devexit_p(gp2a_remove), + .id_table = gp2a_i2c_id, +}; + +static int __init gp2a_init(void) +{ + return i2c_add_driver(&gp2a_i2c_driver); +} + +static void __exit gp2a_exit(void) +{ + i2c_del_driver(&gp2a_i2c_driver); +} + +module_init(gp2a_init); +module_exit(gp2a_exit); + +MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>"); +MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c new file mode 100644 index 00000000000..277a0574c19 --- /dev/null +++ b/drivers/input/misc/gpio_tilt_polled.c @@ -0,0 +1,213 @@ +/* + * Driver for tilt switches connected via GPIO lines + * not capable of generating interrupts + * + * Copyright (C) 2011 Heiko Stuebner <heiko@sntech.de> + * + * based on: drivers/input/keyboard/gpio_keys_polled.c + * + * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/input/gpio_tilt.h> + +#define DRV_NAME "gpio-tilt-polled" + +struct gpio_tilt_polled_dev { + struct input_polled_dev *poll_dev; + struct device *dev; + const struct gpio_tilt_platform_data *pdata; + + int last_state; + + int threshold; + int count; +}; + +static void gpio_tilt_polled_poll(struct input_polled_dev *dev) +{ + struct gpio_tilt_polled_dev *tdev = dev->private; + const struct gpio_tilt_platform_data *pdata = tdev->pdata; + struct input_dev *input = dev->input; + struct gpio_tilt_state *tilt_state = NULL; + int state, i; + + if (tdev->count < tdev->threshold) { + tdev->count++; + } else { + state = 0; + for (i = 0; i < pdata->nr_gpios; i++) + state |= (!!gpio_get_value(pdata->gpios[i].gpio) << i); + + if (state != tdev->last_state) { + for (i = 0; i < pdata->nr_states; i++) + if (pdata->states[i].gpios == state) + tilt_state = &pdata->states[i]; + + if (tilt_state) { + for (i = 0; i < pdata->nr_axes; i++) + input_report_abs(input, + pdata->axes[i].axis, + tilt_state->axes[i]); + + input_sync(input); + } + + tdev->count = 0; + tdev->last_state = state; + } + } +} + +static void gpio_tilt_polled_open(struct input_polled_dev *dev) +{ + struct gpio_tilt_polled_dev *tdev = dev->private; + const struct gpio_tilt_platform_data *pdata = tdev->pdata; + + if (pdata->enable) + pdata->enable(tdev->dev); + + /* report initial state of the axes */ + tdev->last_state = -1; + tdev->count = tdev->threshold; + gpio_tilt_polled_poll(tdev->poll_dev); +} + +static void gpio_tilt_polled_close(struct input_polled_dev *dev) +{ + struct gpio_tilt_polled_dev *tdev = dev->private; + const struct gpio_tilt_platform_data *pdata = tdev->pdata; + + if (pdata->disable) + pdata->disable(tdev->dev); +} + +static int __devinit gpio_tilt_polled_probe(struct platform_device *pdev) +{ + const struct gpio_tilt_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct gpio_tilt_polled_dev *tdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int error, i; + + if (!pdata || !pdata->poll_interval) + return -EINVAL; + + tdev = kzalloc(sizeof(struct gpio_tilt_polled_dev), GFP_KERNEL); + if (!tdev) { + dev_err(dev, "no memory for private data\n"); + return -ENOMEM; + } + + error = gpio_request_array(pdata->gpios, pdata->nr_gpios); + if (error) { + dev_err(dev, + "Could not request tilt GPIOs: %d\n", error); + goto err_free_tdev; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + dev_err(dev, "no memory for polled device\n"); + error = -ENOMEM; + goto err_free_gpios; + } + + poll_dev->private = tdev; + poll_dev->poll = gpio_tilt_polled_poll; + poll_dev->poll_interval = pdata->poll_interval; + poll_dev->open = gpio_tilt_polled_open; + poll_dev->close = gpio_tilt_polled_close; + + input = poll_dev->input; + + input->name = pdev->name; + input->phys = DRV_NAME"/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + __set_bit(EV_ABS, input->evbit); + for (i = 0; i < pdata->nr_axes; i++) + input_set_abs_params(input, pdata->axes[i].axis, + pdata->axes[i].min, pdata->axes[i].max, + pdata->axes[i].fuzz, pdata->axes[i].flat); + + tdev->threshold = DIV_ROUND_UP(pdata->debounce_interval, + pdata->poll_interval); + + tdev->poll_dev = poll_dev; + tdev->dev = dev; + tdev->pdata = pdata; + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(dev, "unable to register polled device, err=%d\n", + error); + goto err_free_polldev; + } + + platform_set_drvdata(pdev, tdev); + + return 0; + +err_free_polldev: + input_free_polled_device(poll_dev); +err_free_gpios: + gpio_free_array(pdata->gpios, pdata->nr_gpios); +err_free_tdev: + kfree(tdev); + + return error; +} + +static int __devexit gpio_tilt_polled_remove(struct platform_device *pdev) +{ + struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev); + const struct gpio_tilt_platform_data *pdata = tdev->pdata; + + platform_set_drvdata(pdev, NULL); + + input_unregister_polled_device(tdev->poll_dev); + input_free_polled_device(tdev->poll_dev); + + gpio_free_array(pdata->gpios, pdata->nr_gpios); + + kfree(tdev); + + return 0; +} + +static struct platform_driver gpio_tilt_polled_driver = { + .probe = gpio_tilt_polled_probe, + .remove = __devexit_p(gpio_tilt_polled_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(gpio_tilt_polled_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); +MODULE_DESCRIPTION("Polled GPIO tilt driver"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c index 302ab46ce75..50e28306830 100644 --- a/drivers/input/misc/ixp4xx-beeper.c +++ b/drivers/input/misc/ixp4xx-beeper.c @@ -168,16 +168,5 @@ static struct platform_driver ixp4xx_spkr_platform_driver = { .remove = __devexit_p(ixp4xx_spkr_remove), .shutdown = ixp4xx_spkr_shutdown, }; +module_platform_driver(ixp4xx_spkr_platform_driver); -static int __init ixp4xx_spkr_init(void) -{ - return platform_driver_register(&ixp4xx_spkr_platform_driver); -} - -static void __exit ixp4xx_spkr_exit(void) -{ - platform_driver_unregister(&ixp4xx_spkr_platform_driver); -} - -module_init(ixp4xx_spkr_init); -module_exit(ixp4xx_spkr_exit); diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c index 7de0ded4ccc..23cf0827104 100644 --- a/drivers/input/misc/max8925_onkey.c +++ b/drivers/input/misc/max8925_onkey.c @@ -166,18 +166,7 @@ static struct platform_driver max8925_onkey_driver = { .probe = max8925_onkey_probe, .remove = __devexit_p(max8925_onkey_remove), }; - -static int __init max8925_onkey_init(void) -{ - return platform_driver_register(&max8925_onkey_driver); -} -module_init(max8925_onkey_init); - -static void __exit max8925_onkey_exit(void) -{ - platform_driver_unregister(&max8925_onkey_driver); -} -module_exit(max8925_onkey_exit); +module_platform_driver(max8925_onkey_driver); MODULE_DESCRIPTION("Maxim MAX8925 ONKEY driver"); MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c index 09b05228865..8428f1e8e83 100644 --- a/drivers/input/misc/mc13783-pwrbutton.c +++ b/drivers/input/misc/mc13783-pwrbutton.c @@ -255,7 +255,7 @@ static int __devexit mc13783_pwrbutton_remove(struct platform_device *pdev) return 0; } -struct platform_driver mc13783_pwrbutton_driver = { +static struct platform_driver mc13783_pwrbutton_driver = { .probe = mc13783_pwrbutton_probe, .remove = __devexit_p(mc13783_pwrbutton_remove), .driver = { @@ -264,17 +264,7 @@ struct platform_driver mc13783_pwrbutton_driver = { }, }; -static int __init mc13783_pwrbutton_init(void) -{ - return platform_driver_register(&mc13783_pwrbutton_driver); -} -module_init(mc13783_pwrbutton_init); - -static void __exit mc13783_pwrbutton_exit(void) -{ - platform_driver_unregister(&mc13783_pwrbutton_driver); -} -module_exit(mc13783_pwrbutton_exit); +module_platform_driver(mc13783_pwrbutton_driver); MODULE_ALIAS("platform:mc13783-pwrbutton"); MODULE_DESCRIPTION("MC13783 Power Button"); diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c index f71dc728da5..208d1a1cc7f 100644 --- a/drivers/input/misc/mpu3050.c +++ b/drivers/input/misc/mpu3050.c @@ -41,18 +41,67 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> -#define MPU3050_CHIP_ID_REG 0x00 #define MPU3050_CHIP_ID 0x69 -#define MPU3050_XOUT_H 0x1D -#define MPU3050_PWR_MGM 0x3E -#define MPU3050_PWR_MGM_POS 6 -#define MPU3050_PWR_MGM_MASK 0x40 #define MPU3050_AUTO_DELAY 1000 #define MPU3050_MIN_VALUE -32768 #define MPU3050_MAX_VALUE 32767 +#define MPU3050_DEFAULT_POLL_INTERVAL 200 +#define MPU3050_DEFAULT_FS_RANGE 3 + +/* Register map */ +#define MPU3050_CHIP_ID_REG 0x00 +#define MPU3050_SMPLRT_DIV 0x15 +#define MPU3050_DLPF_FS_SYNC 0x16 +#define MPU3050_INT_CFG 0x17 +#define MPU3050_XOUT_H 0x1D +#define MPU3050_PWR_MGM 0x3E +#define MPU3050_PWR_MGM_POS 6 + +/* Register bits */ + +/* DLPF_FS_SYNC */ +#define MPU3050_EXT_SYNC_NONE 0x00 +#define MPU3050_EXT_SYNC_TEMP 0x20 +#define MPU3050_EXT_SYNC_GYROX 0x40 +#define MPU3050_EXT_SYNC_GYROY 0x60 +#define MPU3050_EXT_SYNC_GYROZ 0x80 +#define MPU3050_EXT_SYNC_ACCELX 0xA0 +#define MPU3050_EXT_SYNC_ACCELY 0xC0 +#define MPU3050_EXT_SYNC_ACCELZ 0xE0 +#define MPU3050_EXT_SYNC_MASK 0xE0 +#define MPU3050_FS_250DPS 0x00 +#define MPU3050_FS_500DPS 0x08 +#define MPU3050_FS_1000DPS 0x10 +#define MPU3050_FS_2000DPS 0x18 +#define MPU3050_FS_MASK 0x18 +#define MPU3050_DLPF_CFG_256HZ_NOLPF2 0x00 +#define MPU3050_DLPF_CFG_188HZ 0x01 +#define MPU3050_DLPF_CFG_98HZ 0x02 +#define MPU3050_DLPF_CFG_42HZ 0x03 +#define MPU3050_DLPF_CFG_20HZ 0x04 +#define MPU3050_DLPF_CFG_10HZ 0x05 +#define MPU3050_DLPF_CFG_5HZ 0x06 +#define MPU3050_DLPF_CFG_2100HZ_NOLPF 0x07 +#define MPU3050_DLPF_CFG_MASK 0x07 +/* INT_CFG */ +#define MPU3050_RAW_RDY_EN 0x01 +#define MPU3050_MPU_RDY_EN 0x02 +#define MPU3050_LATCH_INT_EN 0x04 +/* PWR_MGM */ +#define MPU3050_PWR_MGM_PLL_X 0x01 +#define MPU3050_PWR_MGM_PLL_Y 0x02 +#define MPU3050_PWR_MGM_PLL_Z 0x03 +#define MPU3050_PWR_MGM_CLKSEL 0x07 +#define MPU3050_PWR_MGM_STBY_ZG 0x08 +#define MPU3050_PWR_MGM_STBY_YG 0x10 +#define MPU3050_PWR_MGM_STBY_XG 0x20 +#define MPU3050_PWR_MGM_SLEEP 0x40 +#define MPU3050_PWR_MGM_RESET 0x80 +#define MPU3050_PWR_MGM_MASK 0x40 + struct axis_data { s16 x; s16 y; @@ -148,9 +197,20 @@ static void mpu3050_set_power_mode(struct i2c_client *client, u8 val) static int mpu3050_input_open(struct input_dev *input) { struct mpu3050_sensor *sensor = input_get_drvdata(input); + int error; pm_runtime_get(sensor->dev); + /* Enable interrupts */ + error = i2c_smbus_write_byte_data(sensor->client, MPU3050_INT_CFG, + MPU3050_LATCH_INT_EN | + MPU3050_RAW_RDY_EN | + MPU3050_MPU_RDY_EN); + if (error < 0) { + pm_runtime_put(sensor->dev); + return error; + } + return 0; } @@ -192,6 +252,51 @@ static irqreturn_t mpu3050_interrupt_thread(int irq, void *data) } /** + * mpu3050_hw_init - initialize hardware + * @sensor: the sensor + * + * Called during device probe; configures the sampling method. + */ +static int __devinit mpu3050_hw_init(struct mpu3050_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + int ret; + u8 reg; + + /* Reset */ + ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, + MPU3050_PWR_MGM_RESET); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM); + if (ret < 0) + return ret; + + ret &= ~MPU3050_PWR_MGM_CLKSEL; + ret |= MPU3050_PWR_MGM_PLL_Z; + ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, ret); + if (ret < 0) + return ret; + + /* Output frequency divider. The poll interval */ + ret = i2c_smbus_write_byte_data(client, MPU3050_SMPLRT_DIV, + MPU3050_DEFAULT_POLL_INTERVAL - 1); + if (ret < 0) + return ret; + + /* Set low pass filter and full scale */ + reg = MPU3050_DEFAULT_FS_RANGE; + reg |= MPU3050_DLPF_CFG_42HZ << 3; + reg |= MPU3050_EXT_SYNC_NONE << 5; + ret = i2c_smbus_write_byte_data(client, MPU3050_DLPF_FS_SYNC, reg); + if (ret < 0) + return ret; + + return 0; +} + +/** * mpu3050_probe - device detection callback * @client: i2c client of found device * @id: id match information @@ -256,10 +361,14 @@ static int __devinit mpu3050_probe(struct i2c_client *client, pm_runtime_set_active(&client->dev); + error = mpu3050_hw_init(sensor); + if (error) + goto err_pm_set_suspended; + error = request_threaded_irq(client->irq, NULL, mpu3050_interrupt_thread, IRQF_TRIGGER_RISING, - "mpu_int", sensor); + "mpu3050", sensor); if (error) { dev_err(&client->dev, "can't get IRQ %d, error %d\n", client->irq, error); @@ -348,11 +457,18 @@ static const struct i2c_device_id mpu3050_ids[] = { }; MODULE_DEVICE_TABLE(i2c, mpu3050_ids); +static const struct of_device_id mpu3050_of_match[] = { + { .compatible = "invn,mpu3050", }, + { }, +}; +MODULE_DEVICE_TABLE(of, mpu3050_of_match); + static struct i2c_driver mpu3050_i2c_driver = { .driver = { .name = "mpu3050", .owner = THIS_MODULE, .pm = &mpu3050_pm, + .of_match_table = mpu3050_of_match, }, .probe = mpu3050_probe, .remove = __devexit_p(mpu3050_remove), diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c index 99335c28625..e09b4fe8191 100644 --- a/drivers/input/misc/pcap_keys.c +++ b/drivers/input/misc/pcap_keys.c @@ -125,19 +125,7 @@ static struct platform_driver pcap_keys_device_driver = { .owner = THIS_MODULE, } }; - -static int __init pcap_keys_init(void) -{ - return platform_driver_register(&pcap_keys_device_driver); -}; - -static void __exit pcap_keys_exit(void) -{ - platform_driver_unregister(&pcap_keys_device_driver); -}; - -module_init(pcap_keys_init); -module_exit(pcap_keys_exit); +module_platform_driver(pcap_keys_device_driver); MODULE_DESCRIPTION("Motorola PCAP2 input events driver"); MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>"); diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c index 95562735728..53891de80b0 100644 --- a/drivers/input/misc/pcf50633-input.c +++ b/drivers/input/misc/pcf50633-input.c @@ -113,18 +113,7 @@ static struct platform_driver pcf50633_input_driver = { .probe = pcf50633_input_probe, .remove = __devexit_p(pcf50633_input_remove), }; - -static int __init pcf50633_input_init(void) -{ - return platform_driver_register(&pcf50633_input_driver); -} -module_init(pcf50633_input_init); - -static void __exit pcf50633_input_exit(void) -{ - platform_driver_unregister(&pcf50633_input_driver); -} -module_exit(pcf50633_input_exit); +module_platform_driver(pcf50633_input_driver); MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>"); MODULE_DESCRIPTION("PCF50633 input driver"); diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c index 34f4d2e0f50..b2484aa07f3 100644 --- a/drivers/input/misc/pcspkr.c +++ b/drivers/input/misc/pcspkr.c @@ -134,17 +134,5 @@ static struct platform_driver pcspkr_platform_driver = { .remove = __devexit_p(pcspkr_remove), .shutdown = pcspkr_shutdown, }; +module_platform_driver(pcspkr_platform_driver); - -static int __init pcspkr_init(void) -{ - return platform_driver_register(&pcspkr_platform_driver); -} - -static void __exit pcspkr_exit(void) -{ - platform_driver_unregister(&pcspkr_platform_driver); -} - -module_init(pcspkr_init); -module_exit(pcspkr_exit); diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c index 43192930824..dfbfb463ea5 100644 --- a/drivers/input/misc/pm8xxx-vibrator.c +++ b/drivers/input/misc/pm8xxx-vibrator.c @@ -277,18 +277,7 @@ static struct platform_driver pm8xxx_vib_driver = { .pm = &pm8xxx_vib_pm_ops, }, }; - -static int __init pm8xxx_vib_init(void) -{ - return platform_driver_register(&pm8xxx_vib_driver); -} -module_init(pm8xxx_vib_init); - -static void __exit pm8xxx_vib_exit(void) -{ - platform_driver_unregister(&pm8xxx_vib_driver); -} -module_exit(pm8xxx_vib_exit); +module_platform_driver(pm8xxx_vib_driver); MODULE_ALIAS("platform:pm8xxx_vib"); MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework"); diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index b3cfb9c71e6..0f83d0f1d01 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -213,18 +213,7 @@ static struct platform_driver pmic8xxx_pwrkey_driver = { .pm = &pm8xxx_pwr_key_pm_ops, }, }; - -static int __init pmic8xxx_pwrkey_init(void) -{ - return platform_driver_register(&pmic8xxx_pwrkey_driver); -} -module_init(pmic8xxx_pwrkey_init); - -static void __exit pmic8xxx_pwrkey_exit(void) -{ - platform_driver_unregister(&pmic8xxx_pwrkey_driver); -} -module_exit(pmic8xxx_pwrkey_exit); +module_platform_driver(pmic8xxx_pwrkey_driver); MODULE_ALIAS("platform:pmic8xxx_pwrkey"); MODULE_DESCRIPTION("PMIC8XXX Power Key driver"); diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c index 57c294f0719..fc84c8a5114 100644 --- a/drivers/input/misc/pwm-beeper.c +++ b/drivers/input/misc/pwm-beeper.c @@ -180,18 +180,7 @@ static struct platform_driver pwm_beeper_driver = { .pm = PWM_BEEPER_PM_OPS, }, }; - -static int __init pwm_beeper_init(void) -{ - return platform_driver_register(&pwm_beeper_driver); -} -module_init(pwm_beeper_init); - -static void __exit pwm_beeper_exit(void) -{ - platform_driver_unregister(&pwm_beeper_driver); -} -module_exit(pwm_beeper_exit); +module_platform_driver(pwm_beeper_driver); MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); MODULE_DESCRIPTION("PWM beeper driver"); diff --git a/drivers/input/misc/rb532_button.c b/drivers/input/misc/rb532_button.c index e2c7f622a0b..aeb02bcf723 100644 --- a/drivers/input/misc/rb532_button.c +++ b/drivers/input/misc/rb532_button.c @@ -100,19 +100,7 @@ static struct platform_driver rb532_button_driver = { .owner = THIS_MODULE, }, }; - -static int __init rb532_button_init(void) -{ - return platform_driver_register(&rb532_button_driver); -} - -static void __exit rb532_button_exit(void) -{ - platform_driver_unregister(&rb532_button_driver); -} - -module_init(rb532_button_init); -module_exit(rb532_button_exit); +module_platform_driver(rb532_button_driver); MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 2be21694fac..f07f784198b 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -284,19 +284,7 @@ static struct platform_driver rotary_encoder_driver = { .owner = THIS_MODULE, } }; - -static int __init rotary_encoder_init(void) -{ - return platform_driver_register(&rotary_encoder_driver); -} - -static void __exit rotary_encoder_exit(void) -{ - platform_driver_unregister(&rotary_encoder_driver); -} - -module_init(rotary_encoder_init); -module_exit(rotary_encoder_exit); +module_platform_driver(rotary_encoder_driver); MODULE_ALIAS("platform:" DRV_NAME); MODULE_DESCRIPTION("GPIO rotary encoder driver"); diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c index 1a80c0dab83..5d9fd557119 100644 --- a/drivers/input/misc/sgi_btns.c +++ b/drivers/input/misc/sgi_btns.c @@ -164,17 +164,6 @@ static struct platform_driver sgi_buttons_driver = { .owner = THIS_MODULE, }, }; - -static int __init sgi_buttons_init(void) -{ - return platform_driver_register(&sgi_buttons_driver); -} - -static void __exit sgi_buttons_exit(void) -{ - platform_driver_unregister(&sgi_buttons_driver); -} +module_platform_driver(sgi_buttons_driver); MODULE_LICENSE("GPL"); -module_init(sgi_buttons_init); -module_exit(sgi_buttons_exit); diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c index 38e4b507b94..19a68828cd8 100644 --- a/drivers/input/misc/twl4030-pwrbutton.c +++ b/drivers/input/misc/twl4030-pwrbutton.c @@ -107,25 +107,14 @@ static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev) } static struct platform_driver twl4030_pwrbutton_driver = { + .probe = twl4030_pwrbutton_probe, .remove = __exit_p(twl4030_pwrbutton_remove), .driver = { .name = "twl4030_pwrbutton", .owner = THIS_MODULE, }, }; - -static int __init twl4030_pwrbutton_init(void) -{ - return platform_driver_probe(&twl4030_pwrbutton_driver, - twl4030_pwrbutton_probe); -} -module_init(twl4030_pwrbutton_init); - -static void __exit twl4030_pwrbutton_exit(void) -{ - platform_driver_unregister(&twl4030_pwrbutton_driver); -} -module_exit(twl4030_pwrbutton_exit); +module_platform_driver(twl4030_pwrbutton_driver); MODULE_ALIAS("platform:twl4030_pwrbutton"); MODULE_DESCRIPTION("Triton2 Power Button"); diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 3c1a432c14d..37651373a95 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -278,21 +278,9 @@ static struct platform_driver twl4030_vibra_driver = { #endif }, }; - -static int __init twl4030_vibra_init(void) -{ - return platform_driver_register(&twl4030_vibra_driver); -} -module_init(twl4030_vibra_init); - -static void __exit twl4030_vibra_exit(void) -{ - platform_driver_unregister(&twl4030_vibra_driver); -} -module_exit(twl4030_vibra_exit); +module_platform_driver(twl4030_vibra_driver); MODULE_ALIAS("platform:twl4030-vibra"); - MODULE_DESCRIPTION("TWL4030 Vibra driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Nokia Corporation"); diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index ad153a417ee..45874fed523 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -410,18 +410,7 @@ static struct platform_driver twl6040_vibra_driver = { .pm = &twl6040_vibra_pm_ops, }, }; - -static int __init twl6040_vibra_init(void) -{ - return platform_driver_register(&twl6040_vibra_driver); -} -module_init(twl6040_vibra_init); - -static void __exit twl6040_vibra_exit(void) -{ - platform_driver_unregister(&twl6040_vibra_driver); -} -module_exit(twl6040_vibra_exit); +module_platform_driver(twl6040_vibra_driver); MODULE_ALIAS("platform:twl6040-vibra"); MODULE_DESCRIPTION("TWL6040 Vibra driver"); diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c index c3d7ba5f5b4..47f18d6bce4 100644 --- a/drivers/input/misc/wm831x-on.c +++ b/drivers/input/misc/wm831x-on.c @@ -145,18 +145,7 @@ static struct platform_driver wm831x_on_driver = { .owner = THIS_MODULE, }, }; - -static int __init wm831x_on_init(void) -{ - return platform_driver_register(&wm831x_on_driver); -} -module_init(wm831x_on_init); - -static void __exit wm831x_on_exit(void) -{ - platform_driver_unregister(&wm831x_on_driver); -} -module_exit(wm831x_on_exit); +module_platform_driver(wm831x_on_driver); MODULE_ALIAS("platform:wm831x-on"); MODULE_DESCRIPTION("WM831x ON pin"); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 003587c71f4..bd87380bd87 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -17,13 +17,63 @@ #include <linux/slab.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/serio.h> #include <linux/libps2.h> #include "psmouse.h" #include "alps.h" -#define ALPS_OLDPROTO 0x01 /* old style input */ +/* + * Definitions for ALPS version 3 and 4 command mode protocol + */ +#define ALPS_V3_X_MAX 2000 +#define ALPS_V3_Y_MAX 1400 + +#define ALPS_BITMAP_X_BITS 15 +#define ALPS_BITMAP_Y_BITS 11 + +#define ALPS_CMD_NIBBLE_10 0x01f2 + +static const struct alps_nibble_commands alps_v3_nibble_commands[] = { + { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */ + { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ + { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ + { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ + { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ + { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ + { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ + { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ + { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ + { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ + { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ + { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ + { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ + { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ + { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ + { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ +}; + +static const struct alps_nibble_commands alps_v4_nibble_commands[] = { + { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */ + { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ + { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ + { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ + { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ + { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ + { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ + { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ + { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ + { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ + { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ + { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ + { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ + { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ + { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ + { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ +}; + + #define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */ #define ALPS_PASS 0x04 /* device has a pass-through port */ @@ -35,30 +85,33 @@ 6-byte ALPS packet */ static const struct alps_model_info alps_model_data[] = { - { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ - { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */ - { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, - { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, - { { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 }, /* HP ze1115 */ - { { 0x63, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */ - { { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */ - { { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */ - { { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 }, - { { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */ - { { 0x73, 0x00, 0x0a }, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */ - { { 0x73, 0x02, 0x0a }, 0xf8, 0xf8, 0 }, - { { 0x73, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */ - { { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */ - { { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, - { { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */ + { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ + { { 0x33, 0x02, 0x0a }, 0x00, ALPS_PROTO_V1, 0x88, 0xf8, 0 }, /* UMAX-530T */ + { { 0x53, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x53, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x60, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, /* HP ze1115 */ + { { 0x63, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x63, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x63, 0x02, 0x28 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */ + { { 0x63, 0x02, 0x3c }, 0x00, ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */ + { { 0x63, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */ + { { 0x63, 0x02, 0x64 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x63, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */ + { { 0x73, 0x00, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */ + { { 0x73, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, + { { 0x73, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */ + { { 0x20, 0x02, 0x0e }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */ + { { 0x22, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, + { { 0x22, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */ /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ - { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, + { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, - { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ - { { 0x52, 0x01, 0x14 }, 0xff, 0xff, - ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ + { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ + { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, + ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ + { { 0x73, 0x02, 0x64 }, 0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT }, + { { 0x73, 0x02, 0x64 }, 0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT }, + { { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 }, }; /* @@ -67,42 +120,7 @@ static const struct alps_model_info alps_model_data[] = { * isn't valid per PS/2 spec. */ -/* - * PS/2 packet format - * - * byte 0: 0 0 YSGN XSGN 1 M R L - * byte 1: X7 X6 X5 X4 X3 X2 X1 X0 - * byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * - * Note that the device never signals overflow condition. - * - * ALPS absolute Mode - new format - * - * byte 0: 1 ? ? ? 1 ? ? ? - * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 - * byte 2: 0 x10 x9 x8 x7 ? fin ges - * byte 3: 0 y9 y8 y7 1 M R L - * byte 4: 0 y6 y5 y4 y3 y2 y1 y0 - * byte 5: 0 z6 z5 z4 z3 z2 z1 z0 - * - * Dualpoint device -- interleaved packet format - * - * byte 0: 1 1 0 0 1 1 1 1 - * byte 1: 0 x6 x5 x4 x3 x2 x1 x0 - * byte 2: 0 x10 x9 x8 x7 0 fin ges - * byte 3: 0 0 YSGN XSGN 1 1 1 1 - * byte 4: X7 X6 X5 X4 X3 X2 X1 X0 - * byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 - * byte 6: 0 y9 y8 y7 1 m r l - * byte 7: 0 y6 y5 y4 y3 y2 y1 y0 - * byte 8: 0 z6 z5 z4 z3 z2 z1 z0 - * - * CAPITALS = stick, miniscules = touchpad - * - * ?'s can have different meanings on different models, - * such as wheel rotation, extra buttons, stick buttons - * on a dualpoint, etc. - */ +/* Packet formats are described in Documentation/input/alps.txt */ static bool alps_is_valid_first_byte(const struct alps_model_info *model, unsigned char data) @@ -137,7 +155,7 @@ static void alps_report_buttons(struct psmouse *psmouse, input_sync(dev2); } -static void alps_process_packet(struct psmouse *psmouse) +static void alps_process_packet_v1_v2(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; const struct alps_model_info *model = priv->i; @@ -147,7 +165,7 @@ static void alps_process_packet(struct psmouse *psmouse) int x, y, z, ges, fin, left, right, middle; int back = 0, forward = 0; - if (model->flags & ALPS_OLDPROTO) { + if (model->proto_version == ALPS_PROTO_V1) { left = packet[2] & 0x10; right = packet[2] & 0x08; middle = 0; @@ -239,6 +257,403 @@ static void alps_process_packet(struct psmouse *psmouse) input_sync(dev); } +/* + * Process bitmap data from v3 and v4 protocols. Returns the number of + * fingers detected. A return value of 0 means at least one of the + * bitmaps was empty. + * + * The bitmaps don't have enough data to track fingers, so this function + * only generates points representing a bounding box of all contacts. + * These points are returned in x1, y1, x2, and y2 when the return value + * is greater than 0. + */ +static int alps_process_bitmap(unsigned int x_map, unsigned int y_map, + int *x1, int *y1, int *x2, int *y2) +{ + struct alps_bitmap_point { + int start_bit; + int num_bits; + }; + + int fingers_x = 0, fingers_y = 0, fingers; + int i, bit, prev_bit; + struct alps_bitmap_point x_low = {0,}, x_high = {0,}; + struct alps_bitmap_point y_low = {0,}, y_high = {0,}; + struct alps_bitmap_point *point; + + if (!x_map || !y_map) + return 0; + + *x1 = *y1 = *x2 = *y2 = 0; + + prev_bit = 0; + point = &x_low; + for (i = 0; x_map != 0; i++, x_map >>= 1) { + bit = x_map & 1; + if (bit) { + if (!prev_bit) { + point->start_bit = i; + fingers_x++; + } + point->num_bits++; + } else { + if (prev_bit) + point = &x_high; + else + point->num_bits = 0; + } + prev_bit = bit; + } + + /* + * y bitmap is reversed for what we need (lower positions are in + * higher bits), so we process from the top end. + */ + y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS); + prev_bit = 0; + point = &y_low; + for (i = 0; y_map != 0; i++, y_map <<= 1) { + bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1)); + if (bit) { + if (!prev_bit) { + point->start_bit = i; + fingers_y++; + } + point->num_bits++; + } else { + if (prev_bit) + point = &y_high; + else + point->num_bits = 0; + } + prev_bit = bit; + } + + /* + * Fingers can overlap, so we use the maximum count of fingers + * on either axis as the finger count. + */ + fingers = max(fingers_x, fingers_y); + + /* + * If total fingers is > 1 but either axis reports only a single + * contact, we have overlapping or adjacent fingers. For the + * purposes of creating a bounding box, divide the single contact + * (roughly) equally between the two points. + */ + if (fingers > 1) { + if (fingers_x == 1) { + i = x_low.num_bits / 2; + x_low.num_bits = x_low.num_bits - i; + x_high.start_bit = x_low.start_bit + i; + x_high.num_bits = max(i, 1); + } else if (fingers_y == 1) { + i = y_low.num_bits / 2; + y_low.num_bits = y_low.num_bits - i; + y_high.start_bit = y_low.start_bit + i; + y_high.num_bits = max(i, 1); + } + } + + *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) / + (2 * (ALPS_BITMAP_X_BITS - 1)); + *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) / + (2 * (ALPS_BITMAP_Y_BITS - 1)); + + if (fingers > 1) { + *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) / + (2 * (ALPS_BITMAP_X_BITS - 1)); + *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) / + (2 * (ALPS_BITMAP_Y_BITS - 1)); + } + + return fingers; +} + +static void alps_set_slot(struct input_dev *dev, int slot, bool active, + int x, int y) +{ + input_mt_slot(dev, slot); + input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); + if (active) { + input_report_abs(dev, ABS_MT_POSITION_X, x); + input_report_abs(dev, ABS_MT_POSITION_Y, y); + } +} + +static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers, + int x1, int y1, int x2, int y2) +{ + alps_set_slot(dev, 0, num_fingers != 0, x1, y1); + alps_set_slot(dev, 1, num_fingers == 2, x2, y2); +} + +static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = priv->dev2; + int x, y, z, left, right, middle; + + /* Sanity check packet */ + if (!(packet[0] & 0x40)) { + psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n"); + return; + } + + /* + * There's a special packet that seems to indicate the end + * of a stream of trackstick data. Filter these out. + */ + if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f) + return; + + x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f)); + y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f)); + z = (packet[4] & 0x7c) >> 2; + + /* + * The x and y values tend to be quite large, and when used + * alone the trackstick is difficult to use. Scale them down + * to compensate. + */ + x /= 8; + y /= 8; + + input_report_rel(dev, REL_X, x); + input_report_rel(dev, REL_Y, -y); + + /* + * Most ALPS models report the trackstick buttons in the touchpad + * packets, but a few report them here. No reliable way has been + * found to differentiate between the models upfront, so we enable + * the quirk in response to seeing a button press in the trackstick + * packet. + */ + left = packet[3] & 0x01; + right = packet[3] & 0x02; + middle = packet[3] & 0x04; + + if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) && + (left || right || middle)) + priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS; + + if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) { + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_MIDDLE, middle); + } + + input_sync(dev); + return; +} + +static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct input_dev *dev2 = priv->dev2; + int x, y, z; + int left, right, middle; + int x1 = 0, y1 = 0, x2 = 0, y2 = 0; + int fingers = 0, bmap_fingers; + unsigned int x_bitmap, y_bitmap; + + /* + * There's no single feature of touchpad position and bitmap packets + * that can be used to distinguish between them. We rely on the fact + * that a bitmap packet should always follow a position packet with + * bit 6 of packet[4] set. + */ + if (priv->multi_packet) { + /* + * Sometimes a position packet will indicate a multi-packet + * sequence, but then what follows is another position + * packet. Check for this, and when it happens process the + * position packet as usual. + */ + if (packet[0] & 0x40) { + fingers = (packet[5] & 0x3) + 1; + x_bitmap = ((packet[4] & 0x7e) << 8) | + ((packet[1] & 0x7f) << 2) | + ((packet[0] & 0x30) >> 4); + y_bitmap = ((packet[3] & 0x70) << 4) | + ((packet[2] & 0x7f) << 1) | + (packet[4] & 0x01); + + bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap, + &x1, &y1, &x2, &y2); + + /* + * We shouldn't report more than one finger if + * we don't have two coordinates. + */ + if (fingers > 1 && bmap_fingers < 2) + fingers = bmap_fingers; + + /* Now process position packet */ + packet = priv->multi_data; + } else { + priv->multi_packet = 0; + } + } + + /* + * Bit 6 of byte 0 is not usually set in position packets. The only + * times it seems to be set is in situations where the data is + * suspect anyway, e.g. a palm resting flat on the touchpad. Given + * this combined with the fact that this bit is useful for filtering + * out misidentified bitmap packets, we reject anything with this + * bit set. + */ + if (packet[0] & 0x40) + return; + + if (!priv->multi_packet && (packet[4] & 0x40)) { + priv->multi_packet = 1; + memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); + return; + } + + priv->multi_packet = 0; + + left = packet[3] & 0x01; + right = packet[3] & 0x02; + middle = packet[3] & 0x04; + + x = ((packet[1] & 0x7f) << 4) | ((packet[4] & 0x30) >> 2) | + ((packet[0] & 0x30) >> 4); + y = ((packet[2] & 0x7f) << 4) | (packet[4] & 0x0f); + z = packet[5] & 0x7f; + + /* + * Sometimes the hardware sends a single packet with z = 0 + * in the middle of a stream. Real releases generate packets + * with x, y, and z all zero, so these seem to be flukes. + * Ignore them. + */ + if (x && y && !z) + return; + + /* + * If we don't have MT data or the bitmaps were empty, we have + * to rely on ST data. + */ + if (!fingers) { + x1 = x; + y1 = y; + fingers = z > 0 ? 1 : 0; + } + + if (z >= 64) + input_report_key(dev, BTN_TOUCH, 1); + else + input_report_key(dev, BTN_TOUCH, 0); + + alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); + + input_report_key(dev, BTN_TOOL_FINGER, fingers == 1); + input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3); + input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4); + + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + input_report_key(dev, BTN_MIDDLE, middle); + + if (z > 0) { + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + } + input_report_abs(dev, ABS_PRESSURE, z); + + input_sync(dev); + + if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { + left = packet[3] & 0x10; + right = packet[3] & 0x20; + middle = packet[3] & 0x40; + + input_report_key(dev2, BTN_LEFT, left); + input_report_key(dev2, BTN_RIGHT, right); + input_report_key(dev2, BTN_MIDDLE, middle); + input_sync(dev2); + } +} + +static void alps_process_packet_v3(struct psmouse *psmouse) +{ + unsigned char *packet = psmouse->packet; + + /* + * v3 protocol packets come in three types, two representing + * touchpad data and one representing trackstick data. + * Trackstick packets seem to be distinguished by always + * having 0x3f in the last byte. This value has never been + * observed in the last byte of either of the other types + * of packets. + */ + if (packet[5] == 0x3f) { + alps_process_trackstick_packet_v3(psmouse); + return; + } + + alps_process_touchpad_packet_v3(psmouse); +} + +static void alps_process_packet_v4(struct psmouse *psmouse) +{ + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + int x, y, z; + int left, right; + + left = packet[4] & 0x01; + right = packet[4] & 0x02; + + x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | + ((packet[0] & 0x30) >> 4); + y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); + z = packet[5] & 0x7f; + + if (z >= 64) + input_report_key(dev, BTN_TOUCH, 1); + else + input_report_key(dev, BTN_TOUCH, 0); + + if (z > 0) { + input_report_abs(dev, ABS_X, x); + input_report_abs(dev, ABS_Y, y); + } + input_report_abs(dev, ABS_PRESSURE, z); + + input_report_key(dev, BTN_TOOL_FINGER, z > 0); + input_report_key(dev, BTN_LEFT, left); + input_report_key(dev, BTN_RIGHT, right); + + input_sync(dev); +} + +static void alps_process_packet(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + const struct alps_model_info *model = priv->i; + + switch (model->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: + alps_process_packet_v1_v2(psmouse); + break; + case ALPS_PROTO_V3: + alps_process_packet_v3(psmouse); + break; + case ALPS_PROTO_V4: + alps_process_packet_v4(psmouse); + break; + } +} + static void alps_report_bare_ps2_packet(struct psmouse *psmouse, unsigned char packet[], bool report_buttons) @@ -344,7 +759,7 @@ static void alps_flush_packet(unsigned long data) serio_pause_rx(psmouse->ps2dev.serio); - if (psmouse->pktcnt == 6) { + if (psmouse->pktcnt == psmouse->pktsize) { /* * We did not any more data in reasonable amount of time. @@ -395,8 +810,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) return PSMOUSE_BAD_DATA; } - /* Bytes 2 - 6 should have 0 in the highest bit */ - if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 && + /* Bytes 2 - pktsize should have 0 in the highest bit */ + if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", psmouse->pktcnt - 1, @@ -404,7 +819,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) return PSMOUSE_BAD_DATA; } - if (psmouse->pktcnt == 6) { + if (psmouse->pktcnt == psmouse->pktsize) { alps_process_packet(psmouse); return PSMOUSE_FULL_PACKET; } @@ -412,11 +827,127 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) return PSMOUSE_GOOD_DATA; } +static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct alps_data *priv = psmouse->private; + int command; + unsigned char *param; + unsigned char dummy[4]; + + BUG_ON(nibble > 0xf); + + command = priv->nibble_commands[nibble].command; + param = (command & 0x0f00) ? + dummy : (unsigned char *)&priv->nibble_commands[nibble].data; + + if (ps2_command(ps2dev, param, command)) + return -1; + + return 0; +} + +static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + struct alps_data *priv = psmouse->private; + int i, nibble; + + if (ps2_command(ps2dev, NULL, priv->addr_command)) + return -1; + + for (i = 12; i >= 0; i -= 4) { + nibble = (addr >> i) & 0xf; + if (alps_command_mode_send_nibble(psmouse, nibble)) + return -1; + } + + return 0; +} + +static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[4]; + + if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) + return -1; + + /* + * The address being read is returned in the first two bytes + * of the result. Check that this address matches the expected + * address. + */ + if (addr != ((param[0] << 8) | param[1])) + return -1; + + return param[2]; +} + +static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr) +{ + if (alps_command_mode_set_addr(psmouse, addr)) + return -1; + return __alps_command_mode_read_reg(psmouse, addr); +} + +static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value) +{ + if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf)) + return -1; + if (alps_command_mode_send_nibble(psmouse, value & 0xf)) + return -1; + return 0; +} + +static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr, + u8 value) +{ + if (alps_command_mode_set_addr(psmouse, addr)) + return -1; + return __alps_command_mode_write_reg(psmouse, value); +} + +static int alps_enter_command_mode(struct psmouse *psmouse, + unsigned char *resp) +{ + unsigned char param[4]; + struct ps2dev *ps2dev = &psmouse->ps2dev; + + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { + psmouse_err(psmouse, "failed to enter command mode\n"); + return -1; + } + + if (param[0] != 0x88 && param[1] != 0x07) { + psmouse_dbg(psmouse, + "unknown response while entering command mode: %2.2x %2.2x %2.2x\n", + param[0], param[1], param[2]); + return -1; + } + + if (resp) + *resp = param[2]; + return 0; +} + +static inline int alps_exit_command_mode(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) + return -1; + return 0; +} + static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version) { struct ps2dev *ps2dev = &psmouse->ps2dev; static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 }; unsigned char param[4]; + const struct alps_model_info *model = NULL; int i; /* @@ -464,12 +995,41 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version = (param[0] << 8) | (param[1] << 4) | i; } - for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) + for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { if (!memcmp(param, alps_model_data[i].signature, - sizeof(alps_model_data[i].signature))) - return alps_model_data + i; + sizeof(alps_model_data[i].signature))) { + model = alps_model_data + i; + break; + } + } - return NULL; + if (model && model->proto_version > ALPS_PROTO_V2) { + /* + * Need to check command mode response to identify + * model + */ + model = NULL; + if (alps_enter_command_mode(psmouse, param)) { + psmouse_warn(psmouse, + "touchpad failed to enter command mode\n"); + } else { + for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { + if (alps_model_data[i].proto_version > ALPS_PROTO_V2 && + alps_model_data[i].command_mode_resp == param[0]) { + model = alps_model_data + i; + break; + } + } + alps_exit_command_mode(psmouse); + + if (!model) + psmouse_dbg(psmouse, + "Unknown command mode response %2.2x\n", + param[0]); + } + } + + return model; } /* @@ -477,7 +1037,7 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int * subsequent commands. It looks like glidepad is behind stickpointer, * I'd thought it would be other way around... */ -static int alps_passthrough_mode(struct psmouse *psmouse, bool enable) +static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable) { struct ps2dev *ps2dev = &psmouse->ps2dev; int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11; @@ -494,7 +1054,7 @@ static int alps_passthrough_mode(struct psmouse *psmouse, bool enable) return 0; } -static int alps_absolute_mode(struct psmouse *psmouse) +static int alps_absolute_mode_v1_v2(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; @@ -565,17 +1125,17 @@ static int alps_tap_mode(struct psmouse *psmouse, int enable) static int alps_poll(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; - unsigned char buf[6]; + unsigned char buf[sizeof(psmouse->packet)]; bool poll_failed; if (priv->i->flags & ALPS_PASS) - alps_passthrough_mode(psmouse, true); + alps_passthrough_mode_v2(psmouse, true); poll_failed = ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0; if (priv->i->flags & ALPS_PASS) - alps_passthrough_mode(psmouse, false); + alps_passthrough_mode_v2(psmouse, false); if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0) return -1; @@ -592,13 +1152,13 @@ static int alps_poll(struct psmouse *psmouse) return 0; } -static int alps_hw_init(struct psmouse *psmouse) +static int alps_hw_init_v1_v2(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; const struct alps_model_info *model = priv->i; if ((model->flags & ALPS_PASS) && - alps_passthrough_mode(psmouse, true)) { + alps_passthrough_mode_v2(psmouse, true)) { return -1; } @@ -607,13 +1167,13 @@ static int alps_hw_init(struct psmouse *psmouse) return -1; } - if (alps_absolute_mode(psmouse)) { + if (alps_absolute_mode_v1_v2(psmouse)) { psmouse_err(psmouse, "Failed to enable absolute mode\n"); return -1; } if ((model->flags & ALPS_PASS) && - alps_passthrough_mode(psmouse, false)) { + alps_passthrough_mode_v2(psmouse, false)) { return -1; } @@ -626,6 +1186,297 @@ static int alps_hw_init(struct psmouse *psmouse) return 0; } +/* + * Enable or disable passthrough mode to the trackstick. Must be in + * command mode when calling this function. + */ +static int alps_passthrough_mode_v3(struct psmouse *psmouse, bool enable) +{ + int reg_val; + + reg_val = alps_command_mode_read_reg(psmouse, 0x0008); + if (reg_val == -1) + return -1; + + if (enable) + reg_val |= 0x01; + else + reg_val &= ~0x01; + + if (__alps_command_mode_write_reg(psmouse, reg_val)) + return -1; + + return 0; +} + +/* Must be in command mode when calling this function */ +static int alps_absolute_mode_v3(struct psmouse *psmouse) +{ + int reg_val; + + reg_val = alps_command_mode_read_reg(psmouse, 0x0004); + if (reg_val == -1) + return -1; + + reg_val |= 0x06; + if (__alps_command_mode_write_reg(psmouse, reg_val)) + return -1; + + return 0; +} + +static int alps_hw_init_v3(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val; + unsigned char param[4]; + + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + + if (alps_enter_command_mode(psmouse, NULL)) + goto error; + + /* Check for trackstick */ + reg_val = alps_command_mode_read_reg(psmouse, 0x0008); + if (reg_val == -1) + goto error; + if (reg_val & 0x80) { + if (alps_passthrough_mode_v3(psmouse, true)) + goto error; + if (alps_exit_command_mode(psmouse)) + goto error; + + /* + * E7 report for the trackstick + * + * There have been reports of failures to seem to trace back + * to the above trackstick check failing. When these occur + * this E7 report fails, so when that happens we continue + * with the assumption that there isn't a trackstick after + * all. + */ + param[0] = 0x64; + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { + psmouse_warn(psmouse, "trackstick E7 report failed\n"); + } else { + psmouse_dbg(psmouse, + "trackstick E7 report: %2.2x %2.2x %2.2x\n", + param[0], param[1], param[2]); + + /* + * Not sure what this does, but it is absolutely + * essential. Without it, the touchpad does not + * work at all and the trackstick just emits normal + * PS/2 packets. + */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + alps_command_mode_send_nibble(psmouse, 0x9) || + alps_command_mode_send_nibble(psmouse, 0x4)) { + psmouse_err(psmouse, + "Error sending magic E6 sequence\n"); + goto error_passthrough; + } + } + + if (alps_enter_command_mode(psmouse, NULL)) + goto error_passthrough; + if (alps_passthrough_mode_v3(psmouse, false)) + goto error; + } + + if (alps_absolute_mode_v3(psmouse)) { + psmouse_err(psmouse, "Failed to enter absolute mode\n"); + goto error; + } + + reg_val = alps_command_mode_read_reg(psmouse, 0x0006); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) + goto error; + + reg_val = alps_command_mode_read_reg(psmouse, 0x0007); + if (reg_val == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0144) == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, 0x04)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0159) == -1) + goto error; + if (__alps_command_mode_write_reg(psmouse, 0x03)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0163) == -1) + goto error; + if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03)) + goto error; + + if (alps_command_mode_read_reg(psmouse, 0x0162) == -1) + goto error; + if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04)) + goto error; + + /* + * This ensures the trackstick packets are in the format + * supported by this driver. If bit 1 isn't set the packet + * format is different. + */ + if (alps_command_mode_write_reg(psmouse, 0x0008, 0x82)) + goto error; + + alps_exit_command_mode(psmouse); + + /* Set rate and enable data reporting */ + param[0] = 0x64; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { + psmouse_err(psmouse, "Failed to enable data reporting\n"); + return -1; + } + + return 0; + +error_passthrough: + /* Something failed while in passthrough mode, so try to get out */ + if (!alps_enter_command_mode(psmouse, NULL)) + alps_passthrough_mode_v3(psmouse, false); +error: + /* + * Leaving the touchpad in command mode will essentially render + * it unusable until the machine reboots, so exit it here just + * to be safe + */ + alps_exit_command_mode(psmouse); + return -1; +} + +/* Must be in command mode when calling this function */ +static int alps_absolute_mode_v4(struct psmouse *psmouse) +{ + int reg_val; + + reg_val = alps_command_mode_read_reg(psmouse, 0x0004); + if (reg_val == -1) + return -1; + + reg_val |= 0x02; + if (__alps_command_mode_write_reg(psmouse, reg_val)) + return -1; + + return 0; +} + +static int alps_hw_init_v4(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[4]; + + priv->nibble_commands = alps_v4_nibble_commands; + priv->addr_command = PSMOUSE_CMD_DISABLE; + + if (alps_enter_command_mode(psmouse, NULL)) + goto error; + + if (alps_absolute_mode_v4(psmouse)) { + psmouse_err(psmouse, "Failed to enter absolute mode\n"); + goto error; + } + + if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03)) + goto error; + + if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03)) + goto error; + + alps_exit_command_mode(psmouse); + + /* + * This sequence changes the output from a 9-byte to an + * 8-byte format. All the same data seems to be present, + * just in a more compact format. + */ + param[0] = 0xc8; + param[1] = 0x64; + param[2] = 0x50; + if (ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[2], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) + return -1; + + /* Set rate and enable data reporting */ + param[0] = 0x64; + if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { + psmouse_err(psmouse, "Failed to enable data reporting\n"); + return -1; + } + + return 0; + +error: + /* + * Leaving the touchpad in command mode will essentially render + * it unusable until the machine reboots, so exit it here just + * to be safe + */ + alps_exit_command_mode(psmouse); + return -1; +} + +static int alps_hw_init(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + const struct alps_model_info *model = priv->i; + int ret = -1; + + switch (model->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: + ret = alps_hw_init_v1_v2(psmouse); + break; + case ALPS_PROTO_V3: + ret = alps_hw_init_v3(psmouse); + break; + case ALPS_PROTO_V4: + ret = alps_hw_init_v4(psmouse); + break; + } + + return ret; +} + static int alps_reconnect(struct psmouse *psmouse) { const struct alps_model_info *model; @@ -666,6 +1517,8 @@ int alps_init(struct psmouse *psmouse) psmouse->private = priv; + psmouse_reset(psmouse); + model = alps_get_model(psmouse, &version); if (!model) goto init_fail; @@ -693,8 +1546,29 @@ int alps_init(struct psmouse *psmouse) BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); - input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); - input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); + + switch (model->proto_version) { + case ALPS_PROTO_V1: + case ALPS_PROTO_V2: + input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); + break; + case ALPS_PROTO_V3: + set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); + input_mt_init_slots(dev1, 2); + input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0); + input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0); + + set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); + set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); + set_bit(BTN_TOOL_QUADTAP, dev1->keybit); + /* fall through */ + case ALPS_PROTO_V4: + input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0); + input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0); + break; + } + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); if (model->flags & ALPS_WHEEL) { @@ -737,7 +1611,7 @@ int alps_init(struct psmouse *psmouse) psmouse->poll = alps_poll; psmouse->disconnect = alps_disconnect; psmouse->reconnect = alps_reconnect; - psmouse->pktsize = 6; + psmouse->pktsize = model->proto_version == ALPS_PROTO_V4 ? 8 : 6; /* We are having trouble resyncing ALPS touchpads so disable it for now */ psmouse->resync_time = 0; diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 904ed8b3c8b..a00a4ab92a0 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -12,20 +12,39 @@ #ifndef _ALPS_H #define _ALPS_H +#define ALPS_PROTO_V1 0 +#define ALPS_PROTO_V2 1 +#define ALPS_PROTO_V3 2 +#define ALPS_PROTO_V4 3 + struct alps_model_info { unsigned char signature[3]; + unsigned char command_mode_resp; /* v3/v4 only */ + unsigned char proto_version; unsigned char byte0, mask0; unsigned char flags; }; +struct alps_nibble_commands { + int command; + unsigned char data; +}; + struct alps_data { struct input_dev *dev2; /* Relative device */ char phys[32]; /* Phys */ const struct alps_model_info *i;/* Info */ + const struct alps_nibble_commands *nibble_commands; + int addr_command; /* Command to set register address */ int prev_fin; /* Finger bit from previous packet */ + int multi_packet; /* Multi-packet data in progress */ + unsigned char multi_data[6]; /* Saved multi-packet data */ + u8 quirks; struct timer_list timer; }; +#define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */ + #ifdef CONFIG_MOUSE_PS2_ALPS int alps_detect(struct psmouse *psmouse, bool set_properties); int alps_init(struct psmouse *psmouse); diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c index ff5f61a0fd3..39be7b82c04 100644 --- a/drivers/input/mouse/amimouse.c +++ b/drivers/input/mouse/amimouse.c @@ -140,25 +140,13 @@ static int __exit amimouse_remove(struct platform_device *pdev) } static struct platform_driver amimouse_driver = { + .probe = amimouse_probe, .remove = __exit_p(amimouse_remove), .driver = { .name = "amiga-mouse", .owner = THIS_MODULE, }, }; - -static int __init amimouse_init(void) -{ - return platform_driver_probe(&amimouse_driver, amimouse_probe); -} - -module_init(amimouse_init); - -static void __exit amimouse_exit(void) -{ - platform_driver_unregister(&amimouse_driver); -} - -module_exit(amimouse_exit); +module_platform_driver(amimouse_driver); MODULE_ALIAS("platform:amiga-mouse"); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index e2a9867c19d..d2c0db159b1 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -43,6 +43,24 @@ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, } /* + * V3 and later support this fast command + */ +static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c, + unsigned char *param) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) || + ps2_command(ps2dev, NULL, c) || + ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { + psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c); + return -1; + } + + return 0; +} + +/* * A retrying version of ps2_command */ static int elantech_ps2_command(struct psmouse *psmouse, @@ -863,13 +881,13 @@ static int elantech_set_range(struct psmouse *psmouse, i = (etd->fw_version > 0x020800 && etd->fw_version < 0x020900) ? 1 : 2; - if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) return -1; fixed_dpi = param[1] & 0x10; if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) { - if (synaptics_send_cmd(psmouse, ETP_SAMPLE_QUERY, param)) + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, param)) return -1; *x_max = (etd->capabilities[1] - i) * param[1] / 2; @@ -888,7 +906,7 @@ static int elantech_set_range(struct psmouse *psmouse, break; case 3: - if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) return -1; *x_max = (0x0f & param[0]) << 8 | param[1]; @@ -896,7 +914,7 @@ static int elantech_set_range(struct psmouse *psmouse, break; case 4: - if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param)) + if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param)) return -1; *x_max = (0x0f & param[0]) << 8 | param[1]; @@ -913,6 +931,30 @@ static int elantech_set_range(struct psmouse *psmouse, } /* + * (value from firmware) * 10 + 790 = dpi + * we also have to convert dpi to dots/mm (*10/254 to avoid floating point) + */ +static unsigned int elantech_convert_res(unsigned int val) +{ + return (val * 10 + 790) * 10 / 254; +} + +static int elantech_get_resolution_v4(struct psmouse *psmouse, + unsigned int *x_res, + unsigned int *y_res) +{ + unsigned char param[3]; + + if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param)) + return -1; + + *x_res = elantech_convert_res(param[1] & 0x0f); + *y_res = elantech_convert_res((param[1] & 0xf0) >> 4); + + return 0; +} + +/* * Set the appropriate event bits for the input subsystem */ static int elantech_set_input_params(struct psmouse *psmouse) @@ -920,6 +962,7 @@ static int elantech_set_input_params(struct psmouse *psmouse) struct input_dev *dev = psmouse->dev; struct elantech_data *etd = psmouse->private; unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0; + unsigned int x_res = 0, y_res = 0; if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width)) return -1; @@ -967,10 +1010,20 @@ static int elantech_set_input_params(struct psmouse *psmouse) break; case 4: + if (elantech_get_resolution_v4(psmouse, &x_res, &y_res)) { + /* + * if query failed, print a warning and leave the values + * zero to resemble synaptics.c behavior. + */ + psmouse_warn(psmouse, "couldn't query resolution data.\n"); + } + __set_bit(BTN_TOOL_QUADTAP, dev->keybit); /* For X to recognize me as touchpad. */ input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); + input_abs_set_res(dev, ABS_X, x_res); + input_abs_set_res(dev, ABS_Y, y_res); /* * range of pressure and width is the same as v2, * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility. @@ -983,6 +1036,8 @@ static int elantech_set_input_params(struct psmouse *psmouse) input_mt_init_slots(dev, ETP_MAX_FINGERS); input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); + input_abs_set_res(dev, ABS_MT_POSITION_X, x_res); + input_abs_set_res(dev, ABS_MT_POSITION_Y, y_res); input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2, ETP_PMAX_V2, 0, 0); /* @@ -1031,16 +1086,13 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse, struct elantech_data *etd = psmouse->private; struct elantech_attr_data *attr = data; unsigned char *reg = (unsigned char *) etd + attr->field_offset; - unsigned long value; + unsigned char value; int err; - err = strict_strtoul(buf, 16, &value); + err = kstrtou8(buf, 16, &value); if (err) return err; - if (value > 0xff) - return -EINVAL; - /* Do we need to preserve some bits for version 2 hardware too? */ if (etd->hw_version == 1) { if (attr->reg == 0x10) @@ -1233,9 +1285,11 @@ static int elantech_set_properties(struct elantech_data *etd) } } - /* - * Turn on packet checking by default. - */ + /* decide which send_cmd we're gonna use early */ + etd->send_cmd = etd->hw_version >= 3 ? elantech_send_cmd : + synaptics_send_cmd; + + /* Turn on packet checking by default */ etd->paritycheck = 1; /* @@ -1291,7 +1345,7 @@ int elantech_init(struct psmouse *psmouse) "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n", etd->hw_version, param[0], param[1], param[2]); - if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, + if (etd->send_cmd(psmouse, ETP_CAPABILITIES_QUERY, etd->capabilities)) { psmouse_err(psmouse, "failed to query capabilities.\n"); goto init_fail; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index 9e5f1aabea7..46db3be45ac 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -20,6 +20,7 @@ #define ETP_FW_VERSION_QUERY 0x01 #define ETP_CAPABILITIES_QUERY 0x02 #define ETP_SAMPLE_QUERY 0x03 +#define ETP_RESOLUTION_QUERY 0x04 /* * Command values for register reading or writing @@ -135,6 +136,7 @@ struct elantech_data { unsigned int width; struct finger_pos mt[ETP_MAX_FINGERS]; unsigned char parity[256]; + int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param); }; #ifdef CONFIG_MOUSE_PS2_ELANTECH diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index 58902fbb989..a9ad8e1402b 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -178,18 +178,7 @@ static struct platform_driver gpio_mouse_device_driver = { .owner = THIS_MODULE, } }; - -static int __init gpio_mouse_init(void) -{ - return platform_driver_register(&gpio_mouse_device_driver); -} -module_init(gpio_mouse_init); - -static void __exit gpio_mouse_exit(void) -{ - platform_driver_unregister(&gpio_mouse_device_driver); -} -module_exit(gpio_mouse_exit); +module_platform_driver(gpio_mouse_device_driver); MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("GPIO mouse driver"); diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index 0470dd46b56..1c5d521de60 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -789,11 +789,14 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct hgpk_data *priv = psmouse->private; - unsigned long value; + unsigned int value; int err; - err = strict_strtoul(buf, 10, &value); - if (err || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; if (value != priv->powered) { @@ -881,11 +884,14 @@ static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct hgpk_data *priv = psmouse->private; - unsigned long value; + unsigned int value; int err; - err = strict_strtoul(buf, 10, &value); - if (err || value != 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value != 1) return -EINVAL; /* diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index faac2c3bef7..84de2fc6acc 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -155,9 +155,14 @@ static ssize_t ps2pp_attr_show_smartscroll(struct psmouse *psmouse, static ssize_t ps2pp_attr_set_smartscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long value; + unsigned int value; + int err; - if (strict_strtoul(buf, 10, &value) || value > 1) + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) return -EINVAL; ps2pp_set_smartscroll(psmouse, value); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 9f352fbd7b4..de7e8bc17b1 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -127,7 +127,7 @@ struct psmouse_protocol { * relevant events to the input module once full packet has arrived. */ -static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) +psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) { struct input_dev *dev = psmouse->dev; unsigned char *packet = psmouse->packet; @@ -418,6 +418,49 @@ int psmouse_reset(struct psmouse *psmouse) return 0; } +/* + * Here we set the mouse resolution. + */ + +void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) +{ + static const unsigned char params[] = { 0, 1, 2, 2, 3 }; + unsigned char p; + + if (resolution == 0 || resolution > 200) + resolution = 200; + + p = params[resolution / 50]; + ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES); + psmouse->resolution = 25 << p; +} + +/* + * Here we set the mouse report rate. + */ + +static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) +{ + static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 }; + unsigned char r; + int i = 0; + + while (rates[i] > rate) i++; + r = rates[i]; + ps2_command(&psmouse->ps2dev, &r, PSMOUSE_CMD_SETRATE); + psmouse->rate = r; +} + +/* + * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. + */ + +static int psmouse_poll(struct psmouse *psmouse) +{ + return ps2_command(&psmouse->ps2dev, psmouse->packet, + PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)); +} + /* * Genius NetMouse magic init. @@ -603,6 +646,56 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties) } /* + * Apply default settings to the psmouse structure. Most of them will + * be overridden by individual protocol initialization routines. + */ + +static void psmouse_apply_defaults(struct psmouse *psmouse) +{ + struct input_dev *input_dev = psmouse->dev; + + memset(input_dev->evbit, 0, sizeof(input_dev->evbit)); + memset(input_dev->keybit, 0, sizeof(input_dev->keybit)); + memset(input_dev->relbit, 0, sizeof(input_dev->relbit)); + memset(input_dev->absbit, 0, sizeof(input_dev->absbit)); + memset(input_dev->mscbit, 0, sizeof(input_dev->mscbit)); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(EV_REL, input_dev->evbit); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + + __set_bit(REL_X, input_dev->relbit); + __set_bit(REL_Y, input_dev->relbit); + + psmouse->set_rate = psmouse_set_rate; + psmouse->set_resolution = psmouse_set_resolution; + psmouse->poll = psmouse_poll; + psmouse->protocol_handler = psmouse_process_byte; + psmouse->pktsize = 3; + psmouse->reconnect = NULL; + psmouse->disconnect = NULL; + psmouse->cleanup = NULL; + psmouse->pt_activate = NULL; + psmouse->pt_deactivate = NULL; +} + +/* + * Apply default settings to the psmouse structure and call specified + * protocol detection or initialization routine. + */ +static int psmouse_do_detect(int (*detect)(struct psmouse *psmouse, + bool set_properties), + struct psmouse *psmouse, bool set_properties) +{ + if (set_properties) + psmouse_apply_defaults(psmouse); + + return detect(psmouse, set_properties); +} + +/* * psmouse_extensions() probes for any extensions to the basic PS/2 protocol * the mouse may have. */ @@ -616,7 +709,7 @@ static int psmouse_extensions(struct psmouse *psmouse, * We always check for lifebook because it does not disturb mouse * (it only checks DMI information). */ - if (lifebook_detect(psmouse, set_properties) == 0) { + if (psmouse_do_detect(lifebook_detect, psmouse, set_properties) == 0) { if (max_proto > PSMOUSE_IMEX) { if (!set_properties || lifebook_init(psmouse) == 0) return PSMOUSE_LIFEBOOK; @@ -628,15 +721,18 @@ static int psmouse_extensions(struct psmouse *psmouse, * upsets the thinkingmouse). */ - if (max_proto > PSMOUSE_IMEX && thinking_detect(psmouse, set_properties) == 0) + if (max_proto > PSMOUSE_IMEX && + psmouse_do_detect(thinking_detect, psmouse, set_properties) == 0) { return PSMOUSE_THINKPS; + } /* * Try Synaptics TouchPad. Note that probing is done even if Synaptics protocol * support is disabled in config - we need to know if it is synaptics so we * can reset it properly after probing for intellimouse. */ - if (max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse, set_properties) == 0) { + if (max_proto > PSMOUSE_PS2 && + psmouse_do_detect(synaptics_detect, psmouse, set_properties) == 0) { synaptics_hardware = true; if (max_proto > PSMOUSE_IMEX) { @@ -667,7 +763,8 @@ static int psmouse_extensions(struct psmouse *psmouse, */ if (max_proto > PSMOUSE_IMEX) { ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); - if (alps_detect(psmouse, set_properties) == 0) { + if (psmouse_do_detect(alps_detect, + psmouse, set_properties) == 0) { if (!set_properties || alps_init(psmouse) == 0) return PSMOUSE_ALPS; /* @@ -681,7 +778,7 @@ static int psmouse_extensions(struct psmouse *psmouse, * Try OLPC HGPK touchpad. */ if (max_proto > PSMOUSE_IMEX && - hgpk_detect(psmouse, set_properties) == 0) { + psmouse_do_detect(hgpk_detect, psmouse, set_properties) == 0) { if (!set_properties || hgpk_init(psmouse) == 0) return PSMOUSE_HGPK; /* @@ -694,7 +791,7 @@ static int psmouse_extensions(struct psmouse *psmouse, * Try Elantech touchpad. */ if (max_proto > PSMOUSE_IMEX && - elantech_detect(psmouse, set_properties) == 0) { + psmouse_do_detect(elantech_detect, psmouse, set_properties) == 0) { if (!set_properties || elantech_init(psmouse) == 0) return PSMOUSE_ELANTECH; /* @@ -703,18 +800,21 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } - if (max_proto > PSMOUSE_IMEX) { - if (genius_detect(psmouse, set_properties) == 0) + if (psmouse_do_detect(genius_detect, + psmouse, set_properties) == 0) return PSMOUSE_GENPS; - if (ps2pp_init(psmouse, set_properties) == 0) + if (psmouse_do_detect(ps2pp_init, + psmouse, set_properties) == 0) return PSMOUSE_PS2PP; - if (trackpoint_detect(psmouse, set_properties) == 0) + if (psmouse_do_detect(trackpoint_detect, + psmouse, set_properties) == 0) return PSMOUSE_TRACKPOINT; - if (touchkit_ps2_detect(psmouse, set_properties) == 0) + if (psmouse_do_detect(touchkit_ps2_detect, + psmouse, set_properties) == 0) return PSMOUSE_TOUCHKIT_PS2; } @@ -723,7 +823,8 @@ static int psmouse_extensions(struct psmouse *psmouse, * Trackpoint devices (causing TP_READ_ID command to time out). */ if (max_proto > PSMOUSE_IMEX) { - if (fsp_detect(psmouse, set_properties) == 0) { + if (psmouse_do_detect(fsp_detect, + psmouse, set_properties) == 0) { if (!set_properties || fsp_init(psmouse) == 0) return PSMOUSE_FSP; /* @@ -741,17 +842,23 @@ static int psmouse_extensions(struct psmouse *psmouse, ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); psmouse_reset(psmouse); - if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse, set_properties) == 0) + if (max_proto >= PSMOUSE_IMEX && + psmouse_do_detect(im_explorer_detect, + psmouse, set_properties) == 0) { return PSMOUSE_IMEX; + } - if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse, set_properties) == 0) + if (max_proto >= PSMOUSE_IMPS && + psmouse_do_detect(intellimouse_detect, + psmouse, set_properties) == 0) { return PSMOUSE_IMPS; + } /* * Okay, all failed, we have a standard mouse here. The number of the buttons * is still a question, though. We assume 3. */ - ps2bare_detect(psmouse, set_properties); + psmouse_do_detect(ps2bare_detect, psmouse, set_properties); if (synaptics_hardware) { /* @@ -819,6 +926,13 @@ static const struct psmouse_protocol psmouse_protocols[] = { .detect = synaptics_detect, .init = synaptics_init, }, + { + .type = PSMOUSE_SYNAPTICS_RELATIVE, + .name = "SynRelPS/2", + .alias = "synaptics-relative", + .detect = synaptics_detect, + .init = synaptics_init_relative, + }, #endif #ifdef CONFIG_MOUSE_PS2_ALPS { @@ -958,39 +1072,6 @@ static int psmouse_probe(struct psmouse *psmouse) } /* - * Here we set the mouse resolution. - */ - -void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) -{ - static const unsigned char params[] = { 0, 1, 2, 2, 3 }; - unsigned char p; - - if (resolution == 0 || resolution > 200) - resolution = 200; - - p = params[resolution / 50]; - ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES); - psmouse->resolution = 25 << p; -} - -/* - * Here we set the mouse report rate. - */ - -static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) -{ - static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 }; - unsigned char r; - int i = 0; - - while (rates[i] > rate) i++; - r = rates[i]; - ps2_command(&psmouse->ps2dev, &r, PSMOUSE_CMD_SETRATE); - psmouse->rate = r; -} - -/* * psmouse_initialize() initializes the mouse to a sane state. */ @@ -1035,16 +1116,6 @@ static void psmouse_deactivate(struct psmouse *psmouse) psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); } -/* - * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. - */ - -static int psmouse_poll(struct psmouse *psmouse) -{ - return ps2_command(&psmouse->ps2dev, psmouse->packet, - PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)); -} - /* * psmouse_resync() attempts to re-validate current protocol. @@ -1245,18 +1316,9 @@ static int psmouse_switch_protocol(struct psmouse *psmouse, input_dev->dev.parent = &psmouse->ps2dev.serio->dev; - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); - input_dev->keybit[BIT_WORD(BTN_MOUSE)] = - BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); - input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); - - psmouse->set_rate = psmouse_set_rate; - psmouse->set_resolution = psmouse_set_resolution; - psmouse->poll = psmouse_poll; - psmouse->protocol_handler = psmouse_process_byte; - psmouse->pktsize = 3; - if (proto && (proto->detect || proto->init)) { + psmouse_apply_defaults(psmouse); + if (proto->detect && proto->detect(psmouse, true) < 0) return -1; @@ -1558,13 +1620,12 @@ static ssize_t psmouse_show_int_attr(struct psmouse *psmouse, void *offset, char static ssize_t psmouse_set_int_attr(struct psmouse *psmouse, void *offset, const char *buf, size_t count) { unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset); - unsigned long value; - - if (strict_strtoul(buf, 10, &value)) - return -EINVAL; + unsigned int value; + int err; - if ((unsigned int)value != value) - return -EINVAL; + err = kstrtouint(buf, 10, &value); + if (err) + return err; *field = value; @@ -1671,10 +1732,12 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long value; + unsigned int value; + int err; - if (strict_strtoul(buf, 10, &value)) - return -EINVAL; + err = kstrtouint(buf, 10, &value); + if (err) + return err; psmouse->set_rate(psmouse, value); return count; @@ -1682,10 +1745,12 @@ static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const static ssize_t psmouse_attr_set_resolution(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long value; + unsigned int value; + int err; - if (strict_strtoul(buf, 10, &value)) - return -EINVAL; + err = kstrtouint(buf, 10, &value); + if (err) + return err; psmouse->set_resolution(psmouse, value); return count; diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 9b84b0c4e37..6a417092d01 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -8,6 +8,7 @@ #define PSMOUSE_CMD_SETSTREAM 0x00ea #define PSMOUSE_CMD_SETPOLL 0x00f0 #define PSMOUSE_CMD_POLL 0x00eb /* caller sets number of bytes to receive */ +#define PSMOUSE_CMD_RESET_WRAP 0x00ec #define PSMOUSE_CMD_GETID 0x02f2 #define PSMOUSE_CMD_SETRATE 0x10f3 #define PSMOUSE_CMD_ENABLE 0x00f4 @@ -93,6 +94,7 @@ enum psmouse_type { PSMOUSE_HGPK, PSMOUSE_ELANTECH, PSMOUSE_FSP, + PSMOUSE_SYNAPTICS_RELATIVE, PSMOUSE_AUTO /* This one should always be last */ }; @@ -102,6 +104,7 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command); int psmouse_reset(struct psmouse *psmouse); void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state); void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution); +psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse); struct psmouse_attribute { struct device_attribute dattr; diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c index ee3b0ca9d59..a9e4bfdf31f 100644 --- a/drivers/input/mouse/pxa930_trkball.c +++ b/drivers/input/mouse/pxa930_trkball.c @@ -250,19 +250,7 @@ static struct platform_driver pxa930_trkball_driver = { .probe = pxa930_trkball_probe, .remove = __devexit_p(pxa930_trkball_remove), }; - -static int __init pxa930_trkball_init(void) -{ - return platform_driver_register(&pxa930_trkball_driver); -} - -static void __exit pxa930_trkball_exit(void) -{ - platform_driver_unregister(&pxa930_trkball_driver); -} - -module_init(pxa930_trkball_init); -module_exit(pxa930_trkball_exit); +module_platform_driver(pxa930_trkball_driver); MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>"); MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver"); diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 86d6f39178b..e36847de761 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -408,7 +408,7 @@ static int fsp_onpad_hscr(struct psmouse *psmouse, bool enable) static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long reg, val; + int reg, val; char *rest; ssize_t retval; @@ -416,7 +416,11 @@ static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data, if (rest == buf || *rest != ' ' || reg > 0xff) return -EINVAL; - if (strict_strtoul(rest + 1, 16, &val) || val > 0xff) + retval = kstrtoint(rest + 1, 16, &val); + if (retval) + return retval; + + if (val > 0xff) return -EINVAL; if (fsp_reg_write_enable(psmouse, true)) @@ -448,10 +452,13 @@ static ssize_t fsp_attr_set_getreg(struct psmouse *psmouse, void *data, const char *buf, size_t count) { struct fsp_data *pad = psmouse->private; - unsigned long reg; - int val; + int reg, val, err; + + err = kstrtoint(buf, 16, ®); + if (err) + return err; - if (strict_strtoul(buf, 16, ®) || reg > 0xff) + if (reg > 0xff) return -EINVAL; if (fsp_reg_read(psmouse, reg, &val)) @@ -480,9 +487,13 @@ static ssize_t fsp_attr_show_pagereg(struct psmouse *psmouse, static ssize_t fsp_attr_set_pagereg(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long val; + int val, err; - if (strict_strtoul(buf, 16, &val) || val > 0xff) + err = kstrtoint(buf, 16, &val); + if (err) + return err; + + if (val > 0xff) return -EINVAL; if (fsp_page_reg_write(psmouse, val)) @@ -505,9 +516,14 @@ static ssize_t fsp_attr_show_vscroll(struct psmouse *psmouse, static ssize_t fsp_attr_set_vscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long val; + unsigned int val; + int err; + + err = kstrtouint(buf, 10, &val); + if (err) + return err; - if (strict_strtoul(buf, 10, &val) || val > 1) + if (val > 1) return -EINVAL; fsp_onpad_vscr(psmouse, val); @@ -529,9 +545,14 @@ static ssize_t fsp_attr_show_hscroll(struct psmouse *psmouse, static ssize_t fsp_attr_set_hscroll(struct psmouse *psmouse, void *data, const char *buf, size_t count) { - unsigned long val; + unsigned int val; + int err; + + err = kstrtouint(buf, 10, &val); + if (err) + return err; - if (strict_strtoul(buf, 10, &val) || val > 1) + if (val > 1) return -EINVAL; fsp_onpad_hscr(psmouse, val); diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index a6dcd18e9ad..8081a0a5d60 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -269,19 +269,49 @@ static int synaptics_query_hardware(struct psmouse *psmouse) return 0; } -static int synaptics_set_absolute_mode(struct psmouse *psmouse) +static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) +{ + static unsigned char param = 0xc8; + struct synaptics_data *priv = psmouse->private; + + if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) + return 0; + + if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) + return -1; + + if (ps2_command(&psmouse->ps2dev, ¶m, PSMOUSE_CMD_SETRATE)) + return -1; + + /* Advanced gesture mode also sends multi finger data */ + priv->capabilities |= BIT(1); + + return 0; +} + +static int synaptics_set_mode(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; - priv->mode = SYN_BIT_ABSOLUTE_MODE; - if (SYN_ID_MAJOR(priv->identity) >= 4) + priv->mode = 0; + if (priv->absolute_mode) + priv->mode |= SYN_BIT_ABSOLUTE_MODE; + if (priv->disable_gesture) priv->mode |= SYN_BIT_DISABLE_GESTURE; + if (psmouse->rate >= 80) + priv->mode |= SYN_BIT_HIGH_RATE; if (SYN_CAP_EXTENDED(priv->capabilities)) priv->mode |= SYN_BIT_W_MODE; if (synaptics_mode_cmd(psmouse, priv->mode)) return -1; + if (priv->absolute_mode && + synaptics_set_advanced_gesture_mode(psmouse)) { + psmouse_err(psmouse, "Advanced gesture mode init failed.\n"); + return -1; + } + return 0; } @@ -300,26 +330,6 @@ static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate) synaptics_mode_cmd(psmouse, priv->mode); } -static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) -{ - static unsigned char param = 0xc8; - struct synaptics_data *priv = psmouse->private; - - if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || - SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))) - return 0; - - if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) - return -1; - if (ps2_command(&psmouse->ps2dev, ¶m, PSMOUSE_CMD_SETRATE)) - return -1; - - /* Advanced gesture mode also sends multi finger data */ - priv->capabilities |= BIT(1); - - return 0; -} - /***************************************************************************** * Synaptics pass-through PS/2 port support ****************************************************************************/ @@ -1143,8 +1153,24 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) { int i; + /* Things that apply to both modes */ __set_bit(INPUT_PROP_POINTER, dev->propbit); + __set_bit(EV_KEY, dev->evbit); + __set_bit(BTN_LEFT, dev->keybit); + __set_bit(BTN_RIGHT, dev->keybit); + if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) + __set_bit(BTN_MIDDLE, dev->keybit); + + if (!priv->absolute_mode) { + /* Relative mode */ + __set_bit(EV_REL, dev->evbit); + __set_bit(REL_X, dev->relbit); + __set_bit(REL_Y, dev->relbit); + return; + } + + /* Absolute mode */ __set_bit(EV_ABS, dev->evbit); set_abs_position_params(dev, priv, ABS_X, ABS_Y); input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); @@ -1170,20 +1196,14 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) if (SYN_CAP_PALMDETECT(priv->capabilities)) input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0); - __set_bit(EV_KEY, dev->evbit); __set_bit(BTN_TOUCH, dev->keybit); __set_bit(BTN_TOOL_FINGER, dev->keybit); - __set_bit(BTN_LEFT, dev->keybit); - __set_bit(BTN_RIGHT, dev->keybit); if (SYN_CAP_MULTIFINGER(priv->capabilities)) { __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, dev->keybit); } - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) - __set_bit(BTN_MIDDLE, dev->keybit); - if (SYN_CAP_FOUR_BUTTON(priv->capabilities) || SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) { __set_bit(BTN_FORWARD, dev->keybit); @@ -1205,10 +1225,58 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv) } } +static ssize_t synaptics_show_disable_gesture(struct psmouse *psmouse, + void *data, char *buf) +{ + struct synaptics_data *priv = psmouse->private; + + return sprintf(buf, "%c\n", priv->disable_gesture ? '1' : '0'); +} + +static ssize_t synaptics_set_disable_gesture(struct psmouse *psmouse, + void *data, const char *buf, + size_t len) +{ + struct synaptics_data *priv = psmouse->private; + unsigned int value; + int err; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; + + if (value > 1) + return -EINVAL; + + if (value == priv->disable_gesture) + return len; + + priv->disable_gesture = value; + if (value) + priv->mode |= SYN_BIT_DISABLE_GESTURE; + else + priv->mode &= ~SYN_BIT_DISABLE_GESTURE; + + if (synaptics_mode_cmd(psmouse, priv->mode)) + return -EIO; + + return len; +} + +PSMOUSE_DEFINE_ATTR(disable_gesture, S_IWUSR | S_IRUGO, NULL, + synaptics_show_disable_gesture, + synaptics_set_disable_gesture); + static void synaptics_disconnect(struct psmouse *psmouse) { + struct synaptics_data *priv = psmouse->private; + + if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity)) + device_remove_file(&psmouse->ps2dev.serio->dev, + &psmouse_attr_disable_gesture.dattr); + synaptics_reset(psmouse); - kfree(psmouse->private); + kfree(priv); psmouse->private = NULL; } @@ -1245,17 +1313,11 @@ static int synaptics_reconnect(struct psmouse *psmouse) return -1; } - if (synaptics_set_absolute_mode(psmouse)) { + if (synaptics_set_mode(psmouse)) { psmouse_err(psmouse, "Unable to initialize device.\n"); return -1; } - if (synaptics_set_advanced_gesture_mode(psmouse)) { - psmouse_err(psmouse, - "Advanced gesture mode reconnect failed.\n"); - return -1; - } - if (old_priv.identity != priv->identity || old_priv.model_id != priv->model_id || old_priv.capabilities != priv->capabilities || @@ -1332,20 +1394,18 @@ void __init synaptics_module_init(void) broken_olpc_ec = dmi_check_system(olpc_dmi_table); } -int synaptics_init(struct psmouse *psmouse) +static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) { struct synaptics_data *priv; + int err = -1; /* - * The OLPC XO has issues with Synaptics' absolute mode; similarly to - * the HGPK, it quickly degrades and the hardware becomes jumpy and - * overly sensitive. Not only that, but the constant packet spew - * (even at a lowered 40pps rate) overloads the EC such that key - * presses on the keyboard are missed. Given all of that, don't - * even attempt to use Synaptics mode. Relative mode seems to work - * just fine. + * The OLPC XO has issues with Synaptics' absolute mode; the constant + * packet spew overloads the EC such that key presses on the keyboard + * are missed. Given that, don't even attempt to use Absolute mode. + * Relative mode seems to work just fine. */ - if (broken_olpc_ec) { + if (absolute_mode && broken_olpc_ec) { psmouse_info(psmouse, "OLPC XO detected, not enabling Synaptics protocol.\n"); return -ENODEV; @@ -1362,13 +1422,12 @@ int synaptics_init(struct psmouse *psmouse) goto init_fail; } - if (synaptics_set_absolute_mode(psmouse)) { - psmouse_err(psmouse, "Unable to initialize device.\n"); - goto init_fail; - } + priv->absolute_mode = absolute_mode; + if (SYN_ID_DISGEST_SUPPORTED(priv->identity)) + priv->disable_gesture = true; - if (synaptics_set_advanced_gesture_mode(psmouse)) { - psmouse_err(psmouse, "Advanced gesture mode init failed.\n"); + if (synaptics_set_mode(psmouse)) { + psmouse_err(psmouse, "Unable to initialize device.\n"); goto init_fail; } @@ -1393,12 +1452,19 @@ int synaptics_init(struct psmouse *psmouse) psmouse->model = ((priv->model_id & 0x00ff0000) >> 8) | (priv->model_id & 0x000000ff); - psmouse->protocol_handler = synaptics_process_byte; + if (absolute_mode) { + psmouse->protocol_handler = synaptics_process_byte; + psmouse->pktsize = 6; + } else { + /* Relative mode follows standard PS/2 mouse protocol */ + psmouse->protocol_handler = psmouse_process_byte; + psmouse->pktsize = 3; + } + psmouse->set_rate = synaptics_set_rate; psmouse->disconnect = synaptics_disconnect; psmouse->reconnect = synaptics_reconnect; psmouse->cleanup = synaptics_reset; - psmouse->pktsize = 6; /* Synaptics can usually stay in sync without extra help */ psmouse->resync_time = 0; @@ -1417,11 +1483,32 @@ int synaptics_init(struct psmouse *psmouse) psmouse->rate = 40; } + if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity)) { + err = device_create_file(&psmouse->ps2dev.serio->dev, + &psmouse_attr_disable_gesture.dattr); + if (err) { + psmouse_err(psmouse, + "Failed to create disable_gesture attribute (%d)", + err); + goto init_fail; + } + } + return 0; init_fail: kfree(priv); - return -1; + return err; +} + +int synaptics_init(struct psmouse *psmouse) +{ + return __synaptics_init(psmouse, true); +} + +int synaptics_init_relative(struct psmouse *psmouse) +{ + return __synaptics_init(psmouse, false); } bool synaptics_supported(void) diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 622aea8dd7e..fd26ccca13d 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -100,6 +100,7 @@ #define SYN_ID_MINOR(i) (((i) >> 16) & 0xff) #define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i)) #define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47) +#define SYN_ID_DISGEST_SUPPORTED(i) (SYN_ID_MAJOR(i) >= 4) /* synaptics special commands */ #define SYN_PS_SET_MODE2 0x14 @@ -159,6 +160,9 @@ struct synaptics_data { unsigned char mode; /* current mode byte */ int scroll; + bool absolute_mode; /* run in Absolute mode */ + bool disable_gesture; /* disable gestures */ + struct serio *pt_port; /* Pass-through serio port */ struct synaptics_mt_state mt_state; /* Current mt finger state */ @@ -175,6 +179,7 @@ struct synaptics_data { void synaptics_module_init(void); int synaptics_detect(struct psmouse *psmouse, bool set_properties); int synaptics_init(struct psmouse *psmouse); +int synaptics_init_relative(struct psmouse *psmouse); void synaptics_reset(struct psmouse *psmouse); bool synaptics_supported(void); diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c index 54b2fa892e1..22b21801813 100644 --- a/drivers/input/mouse/trackpoint.c +++ b/drivers/input/mouse/trackpoint.c @@ -89,10 +89,12 @@ static ssize_t trackpoint_set_int_attr(struct psmouse *psmouse, void *data, struct trackpoint_data *tp = psmouse->private; struct trackpoint_attr_data *attr = data; unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset); - unsigned long value; + unsigned char value; + int err; - if (strict_strtoul(buf, 10, &value) || value > 255) - return -EINVAL; + err = kstrtou8(buf, 10, &value); + if (err) + return err; *field = value; trackpoint_write(&psmouse->ps2dev, attr->command, value); @@ -115,9 +117,14 @@ static ssize_t trackpoint_set_bit_attr(struct psmouse *psmouse, void *data, struct trackpoint_data *tp = psmouse->private; struct trackpoint_attr_data *attr = data; unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset); - unsigned long value; + unsigned int value; + int err; + + err = kstrtouint(buf, 10, &value); + if (err) + return err; - if (strict_strtoul(buf, 10, &value) || value > 1) + if (value > 1) return -EINVAL; if (attr->inverted) diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c index d363dc4571a..35864c6130b 100644 --- a/drivers/input/serio/altera_ps2.c +++ b/drivers/input/serio/altera_ps2.c @@ -196,18 +196,7 @@ static struct platform_driver altera_ps2_driver = { .of_match_table = altera_ps2_match, }, }; - -static int __init altera_ps2_init(void) -{ - return platform_driver_register(&altera_ps2_driver); -} -module_init(altera_ps2_init); - -static void __exit altera_ps2_exit(void) -{ - platform_driver_unregister(&altera_ps2_driver); -} -module_exit(altera_ps2_exit); +module_platform_driver(altera_ps2_driver); MODULE_DESCRIPTION("Altera University Program PS2 controller driver"); MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>"); diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c index 95280f9207e..421a7442e46 100644 --- a/drivers/input/serio/at32psif.c +++ b/drivers/input/serio/at32psif.c @@ -358,19 +358,7 @@ static struct platform_driver psif_driver = { .suspend = psif_suspend, .resume = psif_resume, }; - -static int __init psif_init(void) -{ - return platform_driver_probe(&psif_driver, psif_probe); -} - -static void __exit psif_exit(void) -{ - platform_driver_unregister(&psif_driver); -} - -module_init(psif_init); -module_exit(psif_exit); +module_platform_driver(psif_driver); MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver"); diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index d37a48e099d..86564414b75 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -991,7 +991,7 @@ static int i8042_controller_init(void) * Reset the controller and reset CRT to the original value set by BIOS. */ -static void i8042_controller_reset(void) +static void i8042_controller_reset(bool force_reset) { i8042_flush(); @@ -1016,7 +1016,7 @@ static void i8042_controller_reset(void) * Reset the controller if requested. */ - if (i8042_reset) + if (i8042_reset || force_reset) i8042_controller_selftest(); /* @@ -1139,9 +1139,9 @@ static int i8042_controller_resume(bool force_reset) * upsetting it. */ -static int i8042_pm_reset(struct device *dev) +static int i8042_pm_suspend(struct device *dev) { - i8042_controller_reset(); + i8042_controller_reset(true); return 0; } @@ -1163,13 +1163,20 @@ static int i8042_pm_thaw(struct device *dev) return 0; } +static int i8042_pm_reset(struct device *dev) +{ + i8042_controller_reset(false); + + return 0; +} + static int i8042_pm_restore(struct device *dev) { return i8042_controller_resume(false); } static const struct dev_pm_ops i8042_pm_ops = { - .suspend = i8042_pm_reset, + .suspend = i8042_pm_suspend, .resume = i8042_pm_resume, .thaw = i8042_pm_thaw, .poweroff = i8042_pm_reset, @@ -1185,7 +1192,7 @@ static const struct dev_pm_ops i8042_pm_ops = { static void i8042_shutdown(struct platform_device *dev) { - i8042_controller_reset(); + i8042_controller_reset(false); } static int __init i8042_create_kbd_port(void) @@ -1424,7 +1431,7 @@ static int __init i8042_probe(struct platform_device *dev) out_fail: i8042_free_aux_ports(); /* in case KBD failed but AUX not */ i8042_free_irqs(); - i8042_controller_reset(); + i8042_controller_reset(false); i8042_platform_device = NULL; return error; @@ -1434,7 +1441,7 @@ static int __devexit i8042_remove(struct platform_device *dev) { i8042_unregister_ports(); i8042_free_irqs(); - i8042_controller_reset(); + i8042_controller_reset(false); i8042_platform_device = NULL; return 0; diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c index 7ec3c97dc1b..8b44ddc8041 100644 --- a/drivers/input/serio/rpckbd.c +++ b/drivers/input/serio/rpckbd.c @@ -143,16 +143,4 @@ static struct platform_driver rpckbd_driver = { .owner = THIS_MODULE, }, }; - -static int __init rpckbd_init(void) -{ - return platform_driver_register(&rpckbd_driver); -} - -static void __exit rpckbd_exit(void) -{ - platform_driver_unregister(&rpckbd_driver); -} - -module_init(rpckbd_init); -module_exit(rpckbd_exit); +module_platform_driver(rpckbd_driver); diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c index d64c5a43aaa..127c391dece 100644 --- a/drivers/input/serio/xilinx_ps2.c +++ b/drivers/input/serio/xilinx_ps2.c @@ -369,19 +369,7 @@ static struct platform_driver xps2_of_driver = { .probe = xps2_of_probe, .remove = __devexit_p(xps2_of_remove), }; - -static int __init xps2_init(void) -{ - return platform_driver_register(&xps2_of_driver); -} - -static void __exit xps2_cleanup(void) -{ - platform_driver_unregister(&xps2_of_driver); -} - -module_init(xps2_init); -module_exit(xps2_cleanup); +module_platform_driver(xps2_of_driver); MODULE_AUTHOR("Xilinx, Inc."); MODULE_DESCRIPTION("Xilinx XPS PS/2 driver"); diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index d5ef3debd04..205d16aab44 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -1198,9 +1198,9 @@ static ssize_t store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - long x; + int x; - if (strict_strtol(buf, 10, &x)) { + if (kstrtoint(buf, 10, &x)) { size_t len = buf[count - 1] == '\n' ? count - 1 : count; if (strncmp(buf, "disable", len)) @@ -1240,9 +1240,9 @@ static ssize_t store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - long y; + int y; - if (strict_strtol(buf, 10, &y)) { + if (kstrtoint(buf, 10, &y)) { size_t len = buf[count - 1] == '\n' ? count - 1 : count; if (strncmp(buf, "disable", len)) @@ -1277,12 +1277,13 @@ static ssize_t store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - long j; + int err, j; - if (strict_strtol(buf, 10, &j)) - return -EINVAL; + err = kstrtoint(buf, 10, &j); + if (err) + return err; - aiptek->newSetting.jitterDelay = (int)j; + aiptek->newSetting.jitterDelay = j; return count; } @@ -1306,12 +1307,13 @@ static ssize_t store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - long d; + int err, d; - if (strict_strtol(buf, 10, &d)) - return -EINVAL; + err = kstrtoint(buf, 10, &d); + if (err) + return err; - aiptek->newSetting.programmableDelay = (int)d; + aiptek->newSetting.programmableDelay = d; return count; } @@ -1557,11 +1559,13 @@ static ssize_t store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - long w; + int err, w; - if (strict_strtol(buf, 10, &w)) return -EINVAL; + err = kstrtoint(buf, 10, &w); + if (err) + return err; - aiptek->newSetting.wheel = (int)w; + aiptek->newSetting.wheel = w; return count; } diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 8f9cde3e0ec..2a97b7e76db 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -28,7 +28,9 @@ #define HID_USAGE_Y_TILT 0x3e #define HID_USAGE_FINGER 0x22 #define HID_USAGE_STYLUS 0x20 -#define HID_COLLECTION 0xc0 +#define HID_COLLECTION 0xa1 +#define HID_COLLECTION_LOGICAL 0x02 +#define HID_COLLECTION_END 0xc0 enum { WCM_UNDEFINED = 0, @@ -66,7 +68,8 @@ static int wacom_get_report(struct usb_interface *intf, u8 type, u8 id, do { retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), USB_REQ_GET_REPORT, - USB_TYPE_CLASS | USB_RECIP_INTERFACE, + USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber, buf, size, 100); @@ -164,7 +167,70 @@ static void wacom_close(struct input_dev *dev) usb_autopm_put_interface(wacom->intf); } -static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, +static int wacom_parse_logical_collection(unsigned char *report, + struct wacom_features *features) +{ + int length = 0; + + if (features->type == BAMBOO_PT) { + + /* Logical collection is only used by 3rd gen Bamboo Touch */ + features->pktlen = WACOM_PKGLEN_BBTOUCH3; + features->device_type = BTN_TOOL_DOUBLETAP; + + /* + * Stylus and Touch have same active area + * so compute physical size based on stylus + * data before its overwritten. + */ + features->x_phy = + (features->x_max * features->x_resolution) / 100; + features->y_phy = + (features->y_max * features->y_resolution) / 100; + + features->x_max = features->y_max = + get_unaligned_le16(&report[10]); + + length = 11; + } + return length; +} + +/* + * Interface Descriptor of wacom devices can be incomplete and + * inconsistent so wacom_features table is used to store stylus + * device's packet lengths, various maximum values, and tablet + * resolution based on product ID's. + * + * For devices that contain 2 interfaces, wacom_features table is + * inaccurate for the touch interface. Since the Interface Descriptor + * for touch interfaces has pretty complete data, this function exists + * to query tablet for this missing information instead of hard coding in + * an additional table. + * + * A typical Interface Descriptor for a stylus will contain a + * boot mouse application collection that is not of interest and this + * function will ignore it. + * + * It also contains a digitizer application collection that also is not + * of interest since any information it contains would be duplicate + * of what is in wacom_features. Usually it defines a report of an array + * of bytes that could be used as max length of the stylus packet returned. + * If it happens to define a Digitizer-Stylus Physical Collection then + * the X and Y logical values contain valid data but it is ignored. + * + * A typical Interface Descriptor for a touch interface will contain a + * Digitizer-Finger Physical Collection which will define both logical + * X/Y maximum as well as the physical size of tablet. Since touch + * interfaces haven't supported pressure or distance, this is enough + * information to override invalid values in the wacom_features table. + * + * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical + * Collection. Instead they define a Logical Collection with a single + * Logical Maximum for both X and Y. + */ +static int wacom_parse_hid(struct usb_interface *intf, + struct hid_descriptor *hid_desc, struct wacom_features *features) { struct usb_device *dev = interface_to_usbdev(intf); @@ -244,8 +310,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi /* penabled only accepts exact bytes of data */ if (features->type == TABLETPC2FG) features->pktlen = WACOM_PKGLEN_GRAPHIRE; - if (features->type == BAMBOO_PT) - features->pktlen = WACOM_PKGLEN_BBFUN; features->device_type = BTN_TOOL_PEN; features->x_max = get_unaligned_le16(&report[i + 3]); @@ -287,8 +351,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi /* penabled only accepts exact bytes of data */ if (features->type == TABLETPC2FG) features->pktlen = WACOM_PKGLEN_GRAPHIRE; - if (features->type == BAMBOO_PT) - features->pktlen = WACOM_PKGLEN_BBFUN; features->device_type = BTN_TOOL_PEN; features->y_max = get_unaligned_le16(&report[i + 3]); @@ -302,6 +364,11 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi i++; break; + /* + * Requiring Stylus Usage will ignore boot mouse + * X/Y values and some cases of invalid Digitizer X/Y + * values commonly reported. + */ case HID_USAGE_STYLUS: pen = 1; i++; @@ -309,10 +376,20 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi } break; - case HID_COLLECTION: + case HID_COLLECTION_END: /* reset UsagePage and Finger */ finger = usage = 0; break; + + case HID_COLLECTION: + i++; + switch (report[i]) { + case HID_COLLECTION_LOGICAL: + i += wacom_parse_logical_collection(&report[i], + features); + break; + } + break; } } @@ -348,7 +425,8 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat WAC_HID_FEATURE_REPORT, report_id, rep_data, 4, 1); } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES); - } else if (features->type != TABLETPC) { + } else if (features->type != TABLETPC && + features->device_type == BTN_TOOL_PEN) { do { rep_data[0] = 2; rep_data[1] = 2; @@ -485,7 +563,8 @@ static int wacom_led_control(struct wacom *wacom) if (!buf) return -ENOMEM; - if (wacom->wacom_wac.features.type == WACOM_21UX2) + if (wacom->wacom_wac.features.type == WACOM_21UX2 || + wacom->wacom_wac.features.type == WACOM_24HD) led = (wacom->led.select[1] << 4) | 0x40; led |= wacom->led.select[0] | 0x4; @@ -704,6 +783,7 @@ static int wacom_initialize_leds(struct wacom *wacom) &intuos4_led_attr_group); break; + case WACOM_24HD: case WACOM_21UX2: wacom->led.select[0] = 0; wacom->led.select[1] = 0; @@ -738,6 +818,7 @@ static void wacom_destroy_leds(struct wacom *wacom) &intuos4_led_attr_group); break; + case WACOM_24HD: case WACOM_21UX2: sysfs_remove_group(&wacom->intf->dev.kobj, &cintiq_led_attr_group); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 2ee47d01a3b..88672ec296c 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -452,7 +452,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom) if ((data[1] & 0xb8) == 0xa0) { t = (data[6] << 2) | ((data[7] >> 6) & 3); if ((features->type >= INTUOS4S && features->type <= INTUOS4L) || - features->type == WACOM_21UX2) { + features->type == WACOM_21UX2 || features->type == WACOM_24HD) { t = (t << 1) | (data[1] & 1); } input_report_abs(input, ABS_PRESSURE, t); @@ -519,6 +519,56 @@ static int wacom_intuos_irq(struct wacom_wac *wacom) input_report_key(input, wacom->tool[1], 0); input_report_abs(input, ABS_MISC, 0); } + } else if (features->type == WACOM_24HD) { + input_report_key(input, BTN_0, (data[6] & 0x01)); + input_report_key(input, BTN_1, (data[6] & 0x02)); + input_report_key(input, BTN_2, (data[6] & 0x04)); + input_report_key(input, BTN_3, (data[6] & 0x08)); + input_report_key(input, BTN_4, (data[6] & 0x10)); + input_report_key(input, BTN_5, (data[6] & 0x20)); + input_report_key(input, BTN_6, (data[6] & 0x40)); + input_report_key(input, BTN_7, (data[6] & 0x80)); + input_report_key(input, BTN_8, (data[8] & 0x01)); + input_report_key(input, BTN_9, (data[8] & 0x02)); + input_report_key(input, BTN_A, (data[8] & 0x04)); + input_report_key(input, BTN_B, (data[8] & 0x08)); + input_report_key(input, BTN_C, (data[8] & 0x10)); + input_report_key(input, BTN_X, (data[8] & 0x20)); + input_report_key(input, BTN_Y, (data[8] & 0x40)); + input_report_key(input, BTN_Z, (data[8] & 0x80)); + + /* + * Three "buttons" are available on the 24HD which are + * physically implemented as a touchstrip. Each button + * is approximately 3 bits wide with a 2 bit spacing. + * The raw touchstrip bits are stored at: + * ((data[3] & 0x1f) << 8) | data[4]) + */ + input_report_key(input, KEY_PROG1, data[4] & 0x07); + input_report_key(input, KEY_PROG2, data[4] & 0xE0); + input_report_key(input, KEY_PROG3, data[3] & 0x1C); + + if (data[1] & 0x80) { + input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); + } else { + /* Out of proximity, clear wheel value. */ + input_report_abs(input, ABS_WHEEL, 0); + } + + if (data[2] & 0x80) { + input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f)); + } else { + /* Out of proximity, clear second wheel value. */ + input_report_abs(input, ABS_THROTTLE, 0); + } + + if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) { + input_report_key(input, wacom->tool[1], 1); + input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); + } else { + input_report_key(input, wacom->tool[1], 0); + input_report_abs(input, ABS_MISC, 0); + } } else { if (features->type == WACOM_21UX2) { input_report_key(input, BTN_0, (data[5] & 0x01)); @@ -799,6 +849,9 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) unsigned char *data = wacom->data; int i; + if (data[0] != 0x02) + return 0; + for (i = 0; i < 2; i++) { int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); bool touch = data[offset + 3] & 0x80; @@ -837,18 +890,77 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) return 0; } +static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data) +{ + struct input_dev *input = wacom->input; + int slot_id = data[0] - 2; /* data[0] is between 2 and 17 */ + bool touch = data[1] & 0x80; + + touch = touch && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, slot_id); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + + if (touch) { + int x = (data[2] << 4) | (data[4] >> 4); + int y = (data[3] << 4) | (data[4] & 0x0f); + int w = data[6]; + + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, w); + } +} + +static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data) +{ + struct input_dev *input = wacom->input; + + input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); + input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); + input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); + input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); +} + +static int wacom_bpt3_touch(struct wacom_wac *wacom) +{ + struct input_dev *input = wacom->input; + unsigned char *data = wacom->data; + int count = data[1] & 0x03; + int i; + + if (data[0] != 0x02) + return 0; + + /* data has up to 7 fixed sized 8-byte messages starting at data[2] */ + for (i = 0; i < count; i++) { + int offset = (8 * i) + 2; + int msg_id = data[offset]; + + if (msg_id >= 2 && msg_id <= 17) + wacom_bpt3_touch_msg(wacom, data + offset); + else if (msg_id == 128) + wacom_bpt3_button_msg(wacom, data + offset); + + } + + input_mt_report_pointer_emulation(input, true); + + input_sync(input); + + return 0; +} + static int wacom_bpt_pen(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned char *data = wacom->data; int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; - /* - * Similar to Graphire protocol, data[1] & 0x20 is proximity and - * data[1] & 0x18 is tool ID. 0x30 is safety check to ignore - * 2 unused tool ID's. - */ - prox = (data[1] & 0x30) == 0x30; + if (data[0] != 0x02) + return 0; + + prox = (data[1] & 0x20) == 0x20; /* * All reports shared between PEN and RUBBER tool must be @@ -912,7 +1024,9 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) { if (len == WACOM_PKGLEN_BBTOUCH) return wacom_bpt_touch(wacom); - else if (len == WACOM_PKGLEN_BBFUN) + else if (len == WACOM_PKGLEN_BBTOUCH3) + return wacom_bpt3_touch(wacom); + else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN) return wacom_bpt_pen(wacom); return 0; @@ -955,6 +1069,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) case CINTIQ: case WACOM_BEE: case WACOM_21UX2: + case WACOM_24HD: sync = wacom_intuos_irq(wacom_wac); break; @@ -1031,9 +1146,9 @@ void wacom_setup_device_quirks(struct wacom_features *features) features->type == BAMBOO_PT) features->quirks |= WACOM_QUIRK_MULTI_INPUT; - /* quirks for bamboo touch */ + /* quirk for bamboo touch with 2 low res touches */ if (features->type == BAMBOO_PT && - features->device_type == BTN_TOOL_DOUBLETAP) { + features->pktlen == WACOM_PKGLEN_BBTOUCH) { features->x_max <<= 5; features->y_max <<= 5; features->x_fuzz <<= 5; @@ -1110,6 +1225,26 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; + case WACOM_24HD: + __set_bit(BTN_A, input_dev->keybit); + __set_bit(BTN_B, input_dev->keybit); + __set_bit(BTN_C, input_dev->keybit); + __set_bit(BTN_X, input_dev->keybit); + __set_bit(BTN_Y, input_dev->keybit); + __set_bit(BTN_Z, input_dev->keybit); + + for (i = 0; i < 10; i++) + __set_bit(BTN_0 + i, input_dev->keybit); + + __set_bit(KEY_PROG1, input_dev->keybit); + __set_bit(KEY_PROG2, input_dev->keybit); + __set_bit(KEY_PROG3, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); + wacom_setup_cintiq(wacom_wac); + break; + case WACOM_21UX2: __set_bit(BTN_A, input_dev->keybit); __set_bit(BTN_B, input_dev->keybit); @@ -1240,7 +1375,21 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); - input_mt_init_slots(input_dev, 2); + if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { + __set_bit(BTN_TOOL_TRIPLETAP, + input_dev->keybit); + __set_bit(BTN_TOOL_QUADTAP, + input_dev->keybit); + + input_mt_init_slots(input_dev, 16); + + input_set_abs_params(input_dev, + ABS_MT_TOUCH_MAJOR, + 0, 255, 0, 0); + } else { + input_mt_init_slots(input_dev, 2); + } + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, features->x_max, features->x_fuzz, 0); @@ -1425,6 +1574,9 @@ static const struct wacom_features wacom_features_0xBB = static const struct wacom_features wacom_features_0xBC = { "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047, 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; +static const struct wacom_features wacom_features_0xF4 = + { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023, 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; @@ -1509,6 +1661,15 @@ static const struct wacom_features wacom_features_0xDA = static struct wacom_features wacom_features_0xDB = { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xDD = + { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023, + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xDE = + { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023, + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xDF = + { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN, 21648, 13700, 1023, + 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x6004 = { "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1604,6 +1765,9 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD8) }, { USB_DEVICE_WACOM(0xDA) }, { USB_DEVICE_WACOM(0xDB) }, + { USB_DEVICE_WACOM(0xDD) }, + { USB_DEVICE_WACOM(0xDE) }, + { USB_DEVICE_WACOM(0xDF) }, { USB_DEVICE_WACOM(0xF0) }, { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0x90) }, @@ -1616,6 +1780,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xE6) }, { USB_DEVICE_WACOM(0xEC) }, { USB_DEVICE_WACOM(0x47) }, + { USB_DEVICE_WACOM(0xF4) }, { USB_DEVICE_LENOVO(0x6004) }, { } }; diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 53eb71b6833..050acaefee7 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -12,7 +12,7 @@ #include <linux/types.h> /* maximum packet length for USB devices */ -#define WACOM_PKGLEN_MAX 32 +#define WACOM_PKGLEN_MAX 64 /* packet length for individual models */ #define WACOM_PKGLEN_PENPRTN 7 @@ -22,6 +22,8 @@ #define WACOM_PKGLEN_TPC1FG 5 #define WACOM_PKGLEN_TPC2FG 14 #define WACOM_PKGLEN_BBTOUCH 20 +#define WACOM_PKGLEN_BBTOUCH3 64 +#define WACOM_PKGLEN_BBPEN 10 /* device IDs */ #define STYLUS_DEVICE_ID 0x02 @@ -57,6 +59,7 @@ enum { INTUOS4S, INTUOS4, INTUOS4L, + WACOM_24HD, WACOM_21UX2, CINTIQ, WACOM_BEE, diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c index b3aebc2166b..05f30b73c3c 100644 --- a/drivers/input/touchscreen/88pm860x-ts.c +++ b/drivers/input/touchscreen/88pm860x-ts.c @@ -217,18 +217,7 @@ static struct platform_driver pm860x_touch_driver = { .probe = pm860x_touch_probe, .remove = __devexit_p(pm860x_touch_remove), }; - -static int __init pm860x_touch_init(void) -{ - return platform_driver_register(&pm860x_touch_driver); -} -module_init(pm860x_touch_init); - -static void __exit pm860x_touch_exit(void) -{ - platform_driver_unregister(&pm860x_touch_driver); -} -module_exit(pm860x_touch_exit); +module_platform_driver(pm860x_touch_driver); MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x"); MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 3488ffe1fa0..4af2a18eb3b 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -98,6 +98,19 @@ config TOUCHSCREEN_ATMEL_MXT To compile this driver as a module, choose M here: the module will be called atmel_mxt_ts. +config TOUCHSCREEN_AUO_PIXCIR + tristate "AUO in-cell touchscreen using Pixcir ICs" + depends on I2C + depends on GPIOLIB + help + Say Y here if you have a AUO display with in-cell touchscreen + using Pixcir ICs. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called auo-pixcir-ts. + config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" depends on SA1100_BITSY @@ -177,6 +190,16 @@ config TOUCHSCREEN_EETI To compile this driver as a module, choose M here: the module will be called eeti_ts. +config TOUCHSCREEN_EGALAX + tristate "EETI eGalax multi-touch panel support" + depends on I2C + help + Say Y here to enable support for I2C connected EETI + eGalax multi-touch panels. + + To compile this driver as a module, choose M here: the + module will be called egalax_ts. + config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" select SERIO @@ -435,6 +458,18 @@ config TOUCHSCREEN_UCB1400 To compile this driver as a module, choose M here: the module will be called ucb1400_ts. +config TOUCHSCREEN_PIXCIR + tristate "PIXCIR I2C touchscreens" + depends on I2C + help + Say Y here if you have a pixcir i2c touchscreen + controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called pixcir_i2c_ts. + config TOUCHSCREEN_WM831X tristate "Support for WM831x touchscreen controllers" depends on MFD_WM831X @@ -541,6 +576,7 @@ config TOUCHSCREEN_USB_COMPOSITE - GoTop Super_Q2/GogoPen/PenPower tablets - JASTEC USB Touch Controller/DigiTech DTR-02U - Zytronic controllers + - Elo TouchSystems 2700 IntelliTouch Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -620,6 +656,11 @@ config TOUCHSCREEN_USB_JASTEC bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_ELO + default y + bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT + depends on TOUCHSCREEN_USB_COMPOSITE + config TOUCHSCREEN_USB_E2I default y bool "e2i Touchscreen controller (e.g. from Mimo 740)" diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index f957676035a..496091e8846 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o +obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o @@ -23,6 +24,7 @@ obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o +obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o @@ -39,6 +41,7 @@ obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o +obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index baa43df6502..49a36df0b75 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -488,10 +488,10 @@ static ssize_t ad7877_disable_store(struct device *dev, const char *buf, size_t count) { struct ad7877 *ts = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtouint(buf, 10, &val); if (error) return error; @@ -518,10 +518,10 @@ static ssize_t ad7877_dac_store(struct device *dev, const char *buf, size_t count) { struct ad7877 *ts = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtouint(buf, 10, &val); if (error) return error; @@ -548,10 +548,10 @@ static ssize_t ad7877_gpio3_store(struct device *dev, const char *buf, size_t count) { struct ad7877 *ts = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtouint(buf, 10, &val); if (error) return error; @@ -579,10 +579,10 @@ static ssize_t ad7877_gpio4_store(struct device *dev, const char *buf, size_t count) { struct ad7877 *ts = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtouint(buf, 10, &val); if (error) return error; @@ -853,7 +853,6 @@ static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume); static struct spi_driver ad7877_driver = { .driver = { .name = "ad7877", - .bus = &spi_bus_type, .owner = THIS_MODULE, .pm = &ad7877_pm, }, diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c index c789b974c79..0dac6712f42 100644 --- a/drivers/input/touchscreen/ad7879-i2c.c +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -16,30 +16,6 @@ #define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */ -#ifdef CONFIG_PM_SLEEP -static int ad7879_i2c_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct ad7879 *ts = i2c_get_clientdata(client); - - ad7879_suspend(ts); - - return 0; -} - -static int ad7879_i2c_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct ad7879 *ts = i2c_get_clientdata(client); - - ad7879_resume(ts); - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(ad7879_i2c_pm, ad7879_i2c_suspend, ad7879_i2c_resume); - /* All registers are word-sized. * AD7879 uses a high-byte first convention. */ @@ -47,7 +23,7 @@ static int ad7879_i2c_read(struct device *dev, u8 reg) { struct i2c_client *client = to_i2c_client(dev); - return swab16(i2c_smbus_read_word_data(client, reg)); + return i2c_smbus_read_word_swapped(client, reg); } static int ad7879_i2c_multi_read(struct device *dev, @@ -68,7 +44,7 @@ static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val) { struct i2c_client *client = to_i2c_client(dev); - return i2c_smbus_write_word_data(client, reg, swab16(val)); + return i2c_smbus_write_word_swapped(client, reg, val); } static const struct ad7879_bus_ops ad7879_i2c_bus_ops = { @@ -119,7 +95,7 @@ static struct i2c_driver ad7879_i2c_driver = { .driver = { .name = "ad7879", .owner = THIS_MODULE, - .pm = &ad7879_i2c_pm, + .pm = &ad7879_pm_ops, }, .probe = ad7879_i2c_probe, .remove = __devexit_p(ad7879_i2c_remove), @@ -141,4 +117,3 @@ module_exit(ad7879_i2c_exit); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("i2c:ad7879"); diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c index b1643c8fa7c..9b2e1c2b197 100644 --- a/drivers/input/touchscreen/ad7879-spi.c +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -22,30 +22,6 @@ #define AD7879_WRITECMD(reg) (AD7879_CMD(reg)) #define AD7879_READCMD(reg) (AD7879_CMD(reg) | AD7879_CMD_READ) -#ifdef CONFIG_PM_SLEEP -static int ad7879_spi_suspend(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct ad7879 *ts = spi_get_drvdata(spi); - - ad7879_suspend(ts); - - return 0; -} - -static int ad7879_spi_resume(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct ad7879 *ts = spi_get_drvdata(spi); - - ad7879_resume(ts); - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(ad7879_spi_pm, ad7879_spi_suspend, ad7879_spi_resume); - /* * ad7879_read/write are only used for initial setup and for sysfs controls. * The main traffic is done in ad7879_collect(). @@ -174,9 +150,8 @@ static int __devexit ad7879_spi_remove(struct spi_device *spi) static struct spi_driver ad7879_spi_driver = { .driver = { .name = "ad7879", - .bus = &spi_bus_type, .owner = THIS_MODULE, - .pm = &ad7879_spi_pm, + .pm = &ad7879_pm_ops, }, .probe = ad7879_spi_probe, .remove = __devexit_p(ad7879_spi_remove), diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index 3b2e9ed2aee..e2482b40da5 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -281,8 +281,11 @@ static void ad7879_close(struct input_dev* input) __ad7879_disable(ts); } -void ad7879_suspend(struct ad7879 *ts) +#ifdef CONFIG_PM_SLEEP +static int ad7879_suspend(struct device *dev) { + struct ad7879 *ts = dev_get_drvdata(dev); + mutex_lock(&ts->input->mutex); if (!ts->suspended && !ts->disabled && ts->input->users) @@ -291,11 +294,14 @@ void ad7879_suspend(struct ad7879 *ts) ts->suspended = true; mutex_unlock(&ts->input->mutex); + + return 0; } -EXPORT_SYMBOL(ad7879_suspend); -void ad7879_resume(struct ad7879 *ts) +static int ad7879_resume(struct device *dev) { + struct ad7879 *ts = dev_get_drvdata(dev); + mutex_lock(&ts->input->mutex); if (ts->suspended && !ts->disabled && ts->input->users) @@ -304,8 +310,13 @@ void ad7879_resume(struct ad7879 *ts) ts->suspended = false; mutex_unlock(&ts->input->mutex); + + return 0; } -EXPORT_SYMBOL(ad7879_resume); +#endif + +SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume); +EXPORT_SYMBOL(ad7879_pm_ops); static void ad7879_toggle(struct ad7879 *ts, bool disable) { @@ -340,10 +351,10 @@ static ssize_t ad7879_disable_store(struct device *dev, const char *buf, size_t count) { struct ad7879 *ts = dev_get_drvdata(dev); - unsigned long val; + unsigned int val; int error; - error = strict_strtoul(buf, 10, &val); + error = kstrtouint(buf, 10, &val); if (error) return error; diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h index 6b45a27236c..6fd13c48d37 100644 --- a/drivers/input/touchscreen/ad7879.h +++ b/drivers/input/touchscreen/ad7879.h @@ -21,8 +21,8 @@ struct ad7879_bus_ops { int (*write)(struct device *dev, u8 reg, u16 val); }; -void ad7879_suspend(struct ad7879 *); -void ad7879_resume(struct ad7879 *); +extern const struct dev_pm_ops ad7879_pm_ops; + struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq, const struct ad7879_bus_ops *bops); void ad7879_remove(struct ad7879 *); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index de31ec6fe9e..23fd9018565 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -602,10 +602,12 @@ static ssize_t ads7846_disable_store(struct device *dev, const char *buf, size_t count) { struct ads7846 *ts = dev_get_drvdata(dev); - unsigned long i; + unsigned int i; + int err; - if (strict_strtoul(buf, 10, &i)) - return -EINVAL; + err = kstrtouint(buf, 10, &i); + if (err) + return err; if (i) ads7846_disable(ts); @@ -1424,7 +1426,6 @@ static int __devexit ads7846_remove(struct spi_device *spi) static struct spi_driver ads7846_driver = { .driver = { .name = "ads7846", - .bus = &spi_bus_type, .owner = THIS_MODULE, .pm = &ads7846_pm, }, diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index 8034cbb20f7..d016cb26d12 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -429,18 +429,7 @@ static struct platform_driver atmel_wm97xx_driver = { .suspend = atmel_wm97xx_suspend, .resume = atmel_wm97xx_resume, }; - -static int __init atmel_wm97xx_init(void) -{ - return platform_driver_probe(&atmel_wm97xx_driver, atmel_wm97xx_probe); -} -module_init(atmel_wm97xx_init); - -static void __exit atmel_wm97xx_exit(void) -{ - platform_driver_unregister(&atmel_wm97xx_driver); -} -module_exit(atmel_wm97xx_exit); +module_platform_driver(atmel_wm97xx_driver); MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32"); diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c index 122a8788365..201b2d2ec1b 100644 --- a/drivers/input/touchscreen/atmel_tsadcc.c +++ b/drivers/input/touchscreen/atmel_tsadcc.c @@ -351,20 +351,7 @@ static struct platform_driver atmel_tsadcc_driver = { .name = "atmel_tsadcc", }, }; - -static int __init atmel_tsadcc_init(void) -{ - return platform_driver_register(&atmel_tsadcc_driver); -} - -static void __exit atmel_tsadcc_exit(void) -{ - platform_driver_unregister(&atmel_tsadcc_driver); -} - -module_init(atmel_tsadcc_init); -module_exit(atmel_tsadcc_exit); - +module_platform_driver(atmel_tsadcc_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Atmel TouchScreen Driver"); diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c new file mode 100644 index 00000000000..94fb9fbb08a --- /dev/null +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -0,0 +1,652 @@ +/* + * Driver for AUO in-cell touchscreens + * + * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> + * + * loosely based on auo_touch.c from Dell Streak vendor-kernel + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2008 QUALCOMM USA, INC. + * + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/input/auo-pixcir-ts.h> + +/* + * Coordinate calculation: + * X1 = X1_LSB + X1_MSB*256 + * Y1 = Y1_LSB + Y1_MSB*256 + * X2 = X2_LSB + X2_MSB*256 + * Y2 = Y2_LSB + Y2_MSB*256 + */ +#define AUO_PIXCIR_REG_X1_LSB 0x00 +#define AUO_PIXCIR_REG_X1_MSB 0x01 +#define AUO_PIXCIR_REG_Y1_LSB 0x02 +#define AUO_PIXCIR_REG_Y1_MSB 0x03 +#define AUO_PIXCIR_REG_X2_LSB 0x04 +#define AUO_PIXCIR_REG_X2_MSB 0x05 +#define AUO_PIXCIR_REG_Y2_LSB 0x06 +#define AUO_PIXCIR_REG_Y2_MSB 0x07 + +#define AUO_PIXCIR_REG_STRENGTH 0x0d +#define AUO_PIXCIR_REG_STRENGTH_X1_LSB 0x0e +#define AUO_PIXCIR_REG_STRENGTH_X1_MSB 0x0f + +#define AUO_PIXCIR_REG_RAW_DATA_X 0x2b +#define AUO_PIXCIR_REG_RAW_DATA_Y 0x4f + +#define AUO_PIXCIR_REG_X_SENSITIVITY 0x6f +#define AUO_PIXCIR_REG_Y_SENSITIVITY 0x70 +#define AUO_PIXCIR_REG_INT_SETTING 0x71 +#define AUO_PIXCIR_REG_INT_WIDTH 0x72 +#define AUO_PIXCIR_REG_POWER_MODE 0x73 + +#define AUO_PIXCIR_REG_VERSION 0x77 +#define AUO_PIXCIR_REG_CALIBRATE 0x78 + +#define AUO_PIXCIR_REG_TOUCHAREA_X1 0x1e +#define AUO_PIXCIR_REG_TOUCHAREA_Y1 0x1f +#define AUO_PIXCIR_REG_TOUCHAREA_X2 0x20 +#define AUO_PIXCIR_REG_TOUCHAREA_Y2 0x21 + +#define AUO_PIXCIR_REG_EEPROM_CALIB_X 0x42 +#define AUO_PIXCIR_REG_EEPROM_CALIB_Y 0xad + +#define AUO_PIXCIR_INT_TPNUM_MASK 0xe0 +#define AUO_PIXCIR_INT_TPNUM_SHIFT 5 +#define AUO_PIXCIR_INT_RELEASE (1 << 4) +#define AUO_PIXCIR_INT_ENABLE (1 << 3) +#define AUO_PIXCIR_INT_POL_HIGH (1 << 2) +#define AUO_PIXCIR_INT_MODE_MASK 0x03 + +/* + * Power modes: + * active: scan speed 60Hz + * sleep: scan speed 10Hz can be auto-activated, wakeup on 1st touch + * deep sleep: scan speed 1Hz can only be entered or left manually. + */ +#define AUO_PIXCIR_POWER_ACTIVE 0x00 +#define AUO_PIXCIR_POWER_SLEEP 0x01 +#define AUO_PIXCIR_POWER_DEEP_SLEEP 0x02 +#define AUO_PIXCIR_POWER_MASK 0x03 + +#define AUO_PIXCIR_POWER_ALLOW_SLEEP (1 << 2) +#define AUO_PIXCIR_POWER_IDLE_TIME(ms) ((ms & 0xf) << 4) + +#define AUO_PIXCIR_CALIBRATE 0x03 + +#define AUO_PIXCIR_EEPROM_CALIB_X_LEN 62 +#define AUO_PIXCIR_EEPROM_CALIB_Y_LEN 36 + +#define AUO_PIXCIR_RAW_DATA_X_LEN 18 +#define AUO_PIXCIR_RAW_DATA_Y_LEN 11 + +#define AUO_PIXCIR_STRENGTH_ENABLE (1 << 0) + +/* Touchscreen absolute values */ +#define AUO_PIXCIR_REPORT_POINTS 2 +#define AUO_PIXCIR_MAX_AREA 0xff +#define AUO_PIXCIR_PENUP_TIMEOUT_MS 10 + +struct auo_pixcir_ts { + struct i2c_client *client; + struct input_dev *input; + char phys[32]; + + /* special handling for touch_indicate interupt mode */ + bool touch_ind_mode; + + wait_queue_head_t wait; + bool stopped; +}; + +struct auo_point_t { + int coord_x; + int coord_y; + int area_major; + int area_minor; + int orientation; +}; + +static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts, + struct auo_point_t *point) +{ + struct i2c_client *client = ts->client; + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + uint8_t raw_coord[8]; + uint8_t raw_area[4]; + int i, ret; + + /* touch coordinates */ + ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB, + 8, raw_coord); + if (ret < 0) { + dev_err(&client->dev, "failed to read coordinate, %d\n", ret); + return ret; + } + + /* touch area */ + ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1, + 4, raw_area); + if (ret < 0) { + dev_err(&client->dev, "could not read touch area, %d\n", ret); + return ret; + } + + for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { + point[i].coord_x = + raw_coord[4 * i + 1] << 8 | raw_coord[4 * i]; + point[i].coord_y = + raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2]; + + if (point[i].coord_x > pdata->x_max || + point[i].coord_y > pdata->y_max) { + dev_warn(&client->dev, "coordinates (%d,%d) invalid\n", + point[i].coord_x, point[i].coord_y); + point[i].coord_x = point[i].coord_y = 0; + } + + /* determine touch major, minor and orientation */ + point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]); + point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]); + point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1]; + } + + return 0; +} + +static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id) +{ + struct auo_pixcir_ts *ts = dev_id; + struct i2c_client *client = ts->client; + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS]; + int i; + int ret; + int fingers = 0; + int abs = -1; + + while (!ts->stopped) { + + /* check for up event in touch touch_ind_mode */ + if (ts->touch_ind_mode) { + if (gpio_get_value(pdata->gpio_int) == 0) { + input_mt_sync(ts->input); + input_report_key(ts->input, BTN_TOUCH, 0); + input_sync(ts->input); + break; + } + } + + ret = auo_pixcir_collect_data(ts, point); + if (ret < 0) { + /* we want to loop only in touch_ind_mode */ + if (!ts->touch_ind_mode) + break; + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); + continue; + } + + for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) { + if (point[i].coord_x > 0 || point[i].coord_y > 0) { + input_report_abs(ts->input, ABS_MT_POSITION_X, + point[i].coord_x); + input_report_abs(ts->input, ABS_MT_POSITION_Y, + point[i].coord_y); + input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR, + point[i].area_major); + input_report_abs(ts->input, ABS_MT_TOUCH_MINOR, + point[i].area_minor); + input_report_abs(ts->input, ABS_MT_ORIENTATION, + point[i].orientation); + input_mt_sync(ts->input); + + /* use first finger as source for singletouch */ + if (fingers == 0) + abs = i; + + /* number of touch points could also be queried + * via i2c but would require an additional call + */ + fingers++; + } + } + + input_report_key(ts->input, BTN_TOUCH, fingers > 0); + + if (abs > -1) { + input_report_abs(ts->input, ABS_X, point[abs].coord_x); + input_report_abs(ts->input, ABS_Y, point[abs].coord_y); + } + + input_sync(ts->input); + + /* we want to loop only in touch_ind_mode */ + if (!ts->touch_ind_mode) + break; + + wait_event_timeout(ts->wait, ts->stopped, + msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS)); + } + + return IRQ_HANDLED; +} + +/* + * Set the power mode of the device. + * Valid modes are + * - AUO_PIXCIR_POWER_ACTIVE + * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch + * - AUO_PIXCIR_POWER_DEEP_SLEEP + */ +static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + ret &= ~AUO_PIXCIR_POWER_MASK; + ret |= mode; + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret); + if (ret) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_POWER_MODE, ret); + return ret; + } + + return 0; +} + +static __devinit int auo_pixcir_int_config(struct auo_pixcir_ts *ts, + int int_setting) +{ + struct i2c_client *client = ts->client; + struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + ret &= ~AUO_PIXCIR_INT_MODE_MASK; + ret |= int_setting; + ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */ + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, + ret); + if (ret < 0) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND; + + return 0; +} + +/* control the generation of interrupts on the device side */ +static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING); + if (ret < 0) { + dev_err(&client->dev, "unable to read reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + if (enable) + ret |= AUO_PIXCIR_INT_ENABLE; + else + ret &= ~AUO_PIXCIR_INT_ENABLE; + + ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING, + ret); + if (ret < 0) { + dev_err(&client->dev, "unable to write reg %Xh, %d\n", + AUO_PIXCIR_REG_INT_SETTING, ret); + return ret; + } + + return 0; +} + +static int auo_pixcir_start(struct auo_pixcir_ts *ts) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE); + if (ret < 0) { + dev_err(&client->dev, "could not set power mode, %d\n", + ret); + return ret; + } + + ts->stopped = false; + mb(); + enable_irq(client->irq); + + ret = auo_pixcir_int_toggle(ts, 1); + if (ret < 0) { + dev_err(&client->dev, "could not enable interrupt, %d\n", + ret); + disable_irq(client->irq); + return ret; + } + + return 0; +} + +static int auo_pixcir_stop(struct auo_pixcir_ts *ts) +{ + struct i2c_client *client = ts->client; + int ret; + + ret = auo_pixcir_int_toggle(ts, 0); + if (ret < 0) { + dev_err(&client->dev, "could not disable interrupt, %d\n", + ret); + return ret; + } + + /* disable receiving of interrupts */ + disable_irq(client->irq); + ts->stopped = true; + mb(); + wake_up(&ts->wait); + + return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP); +} + +static int auo_pixcir_input_open(struct input_dev *dev) +{ + struct auo_pixcir_ts *ts = input_get_drvdata(dev); + int ret; + + ret = auo_pixcir_start(ts); + if (ret) + return ret; + + return 0; +} + +static void auo_pixcir_input_close(struct input_dev *dev) +{ + struct auo_pixcir_ts *ts = input_get_drvdata(dev); + + auo_pixcir_stop(ts); + + return; +} + +#ifdef CONFIG_PM_SLEEP +static int auo_pixcir_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + /* when configured as wakeup source, device should always wake system + * therefore start device if necessary + */ + if (device_may_wakeup(&client->dev)) { + /* need to start device if not open, to be wakeup source */ + if (!input->users) { + ret = auo_pixcir_start(ts); + if (ret) + goto unlock; + } + + enable_irq_wake(client->irq); + ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP); + } else if (input->users) { + ret = auo_pixcir_stop(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} + +static int auo_pixcir_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + struct input_dev *input = ts->input; + int ret = 0; + + mutex_lock(&input->mutex); + + if (device_may_wakeup(&client->dev)) { + disable_irq_wake(client->irq); + + /* need to stop device if it was not open on suspend */ + if (!input->users) { + ret = auo_pixcir_stop(ts); + if (ret) + goto unlock; + } + + /* device wakes automatically from SLEEP */ + } else if (input->users) { + ret = auo_pixcir_start(ts); + } + +unlock: + mutex_unlock(&input->mutex); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, auo_pixcir_suspend, + auo_pixcir_resume); + +static int __devinit auo_pixcir_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + struct auo_pixcir_ts *ts; + struct input_dev *input_dev; + int ret; + + if (!pdata) + return -EINVAL; + + ts = kzalloc(sizeof(struct auo_pixcir_ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + ret = gpio_request(pdata->gpio_int, "auo_pixcir_ts_int"); + if (ret) { + dev_err(&client->dev, "request of gpio %d failed, %d\n", + pdata->gpio_int, ret); + goto err_gpio_int; + } + + if (pdata->init_hw) + pdata->init_hw(client); + + ts->client = client; + ts->touch_ind_mode = 0; + init_waitqueue_head(&ts->wait); + + snprintf(ts->phys, sizeof(ts->phys), + "%s/input0", dev_name(&client->dev)); + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&client->dev, "could not allocate input device\n"); + goto err_input_alloc; + } + + ts->input = input_dev; + + input_dev->name = "AUO-Pixcir touchscreen"; + input_dev->phys = ts->phys; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + input_dev->open = auo_pixcir_input_open; + input_dev->close = auo_pixcir_input_close; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + + __set_bit(BTN_TOUCH, input_dev->keybit); + + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0); + + /* For multi touch */ + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, + pdata->x_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, + pdata->y_max, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, + AUO_PIXCIR_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, + AUO_PIXCIR_MAX_AREA, 0, 0); + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); + + ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION); + if (ret < 0) + goto err_fw_vers; + dev_info(&client->dev, "firmware version 0x%X\n", ret); + + ret = auo_pixcir_int_config(ts, pdata->int_setting); + if (ret) + goto err_fw_vers; + + input_set_drvdata(ts->input, ts); + ts->stopped = true; + + ret = request_threaded_irq(client->irq, NULL, auo_pixcir_interrupt, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + input_dev->name, ts); + if (ret) { + dev_err(&client->dev, "irq %d requested failed\n", client->irq); + goto err_fw_vers; + } + + /* stop device and put it into deep sleep until it is opened */ + ret = auo_pixcir_stop(ts); + if (ret < 0) + goto err_input_register; + + ret = input_register_device(input_dev); + if (ret) { + dev_err(&client->dev, "could not register input device\n"); + goto err_input_register; + } + + i2c_set_clientdata(client, ts); + + return 0; + +err_input_register: + free_irq(client->irq, ts); +err_fw_vers: + input_free_device(input_dev); +err_input_alloc: + if (pdata->exit_hw) + pdata->exit_hw(client); + gpio_free(pdata->gpio_int); +err_gpio_int: + kfree(ts); + + return ret; +} + +static int __devexit auo_pixcir_remove(struct i2c_client *client) +{ + struct auo_pixcir_ts *ts = i2c_get_clientdata(client); + const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data; + + free_irq(client->irq, ts); + + input_unregister_device(ts->input); + + if (pdata->exit_hw) + pdata->exit_hw(client); + + gpio_free(pdata->gpio_int); + + kfree(ts); + + return 0; +} + +static const struct i2c_device_id auo_pixcir_idtable[] = { + { "auo_pixcir_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable); + +static struct i2c_driver auo_pixcir_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "auo_pixcir_ts", + .pm = &auo_pixcir_pm_ops, + }, + .probe = auo_pixcir_probe, + .remove = __devexit_p(auo_pixcir_remove), + .id_table = auo_pixcir_idtable, +}; + +static int __init auo_pixcir_init(void) +{ + return i2c_add_driver(&auo_pixcir_driver); +} +module_init(auo_pixcir_init); + +static void __exit auo_pixcir_exit(void) +{ + i2c_del_driver(&auo_pixcir_driver); +} +module_exit(auo_pixcir_exit); + +MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index 2b72a5923c1..36b65cf10d7 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -379,18 +379,7 @@ static struct platform_driver da9034_touch_driver = { .probe = da9034_touch_probe, .remove = __devexit_p(da9034_touch_remove), }; - -static int __init da9034_touch_init(void) -{ - return platform_driver_register(&da9034_touch_driver); -} -module_init(da9034_touch_init); - -static void __exit da9034_touch_exit(void) -{ - platform_driver_unregister(&da9034_touch_driver); -} -module_exit(da9034_touch_exit); +module_platform_driver(da9034_touch_driver); MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>"); diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c new file mode 100644 index 00000000000..eadcc2e83c7 --- /dev/null +++ b/drivers/input/touchscreen/egalax_ts.c @@ -0,0 +1,303 @@ +/* + * Driver for EETI eGalax Multiple Touch Controller + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * + * based on max11801_ts.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* EETI eGalax serial touch screen controller is a I2C based multiple + * touch screen controller, it supports 5 point multiple touch. */ + +/* TODO: + - auto idle mode support +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/input/mt.h> + +/* + * Mouse Mode: some panel may configure the controller to mouse mode, + * which can only report one point at a given time. + * This driver will ignore events in this mode. + */ +#define REPORT_MODE_MOUSE 0x1 +/* + * Vendor Mode: this mode is used to transfer some vendor specific + * messages. + * This driver will ignore events in this mode. + */ +#define REPORT_MODE_VENDOR 0x3 +/* Multiple Touch Mode */ +#define REPORT_MODE_MTTOUCH 0x4 + +#define MAX_SUPPORT_POINTS 5 + +#define EVENT_VALID_OFFSET 7 +#define EVENT_VALID_MASK (0x1 << EVENT_VALID_OFFSET) +#define EVENT_ID_OFFSET 2 +#define EVENT_ID_MASK (0xf << EVENT_ID_OFFSET) +#define EVENT_IN_RANGE (0x1 << 1) +#define EVENT_DOWN_UP (0X1 << 0) + +#define MAX_I2C_DATA_LEN 10 + +#define EGALAX_MAX_X 32760 +#define EGALAX_MAX_Y 32760 +#define EGALAX_MAX_TRIES 100 + +struct egalax_ts { + struct i2c_client *client; + struct input_dev *input_dev; +}; + +static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) +{ + struct egalax_ts *ts = dev_id; + struct input_dev *input_dev = ts->input_dev; + struct i2c_client *client = ts->client; + u8 buf[MAX_I2C_DATA_LEN]; + int id, ret, x, y, z; + int tries = 0; + bool down, valid; + u8 state; + + do { + ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN); + } while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES); + + if (ret < 0) + return IRQ_HANDLED; + + if (buf[0] != REPORT_MODE_MTTOUCH) { + /* ignore mouse events and vendor events */ + return IRQ_HANDLED; + } + + state = buf[1]; + x = (buf[3] << 8) | buf[2]; + y = (buf[5] << 8) | buf[4]; + z = (buf[7] << 8) | buf[6]; + + valid = state & EVENT_VALID_MASK; + id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET; + down = state & EVENT_DOWN_UP; + + if (!valid || id > MAX_SUPPORT_POINTS) { + dev_dbg(&client->dev, "point invalid\n"); + return IRQ_HANDLED; + } + + input_mt_slot(input_dev, id); + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down); + + dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d", + down ? "down" : "up", id, x, y, z); + + if (down) { + input_report_abs(input_dev, ABS_MT_POSITION_X, x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, y); + input_report_abs(input_dev, ABS_MT_PRESSURE, z); + } + + input_mt_report_pointer_emulation(input_dev, true); + input_sync(input_dev); + + return IRQ_HANDLED; +} + +/* wake up controller by an falling edge of interrupt gpio. */ +static int egalax_wake_up_device(struct i2c_client *client) +{ + int gpio = irq_to_gpio(client->irq); + int ret; + + ret = gpio_request(gpio, "egalax_irq"); + if (ret < 0) { + dev_err(&client->dev, + "request gpio failed, cannot wake up controller: %d\n", + ret); + return ret; + } + + /* wake up controller via an falling edge on IRQ gpio. */ + gpio_direction_output(gpio, 0); + gpio_set_value(gpio, 1); + + /* controller should be waken up, return irq. */ + gpio_direction_input(gpio); + gpio_free(gpio); + + return 0; +} + +static int __devinit egalax_firmware_version(struct i2c_client *client) +{ + static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 }; + int ret; + + ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN); + if (ret < 0) + return ret; + + return 0; +} + +static int __devinit egalax_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct egalax_ts *ts; + struct input_dev *input_dev; + int ret; + int error; + + ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL); + if (!ts) { + dev_err(&client->dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_ts; + } + + ts->client = client; + ts->input_dev = input_dev; + + /* controller may be in sleep, wake it up. */ + egalax_wake_up_device(client); + + ret = egalax_firmware_version(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to read firmware version\n"); + error = -EIO; + goto err_free_dev; + } + + input_dev->name = "EETI eGalax Touch Screen"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); + + input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0); + input_set_abs_params(input_dev, + ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0); + input_set_abs_params(input_dev, + ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0); + input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS); + + input_set_drvdata(input_dev, ts); + + error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "egalax_ts", ts); + if (error < 0) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_dev; + } + + error = input_register_device(ts->input_dev); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, ts); + return 0; + +err_free_irq: + free_irq(client->irq, ts); +err_free_dev: + input_free_device(input_dev); +err_free_ts: + kfree(ts); + + return error; +} + +static __devexit int egalax_ts_remove(struct i2c_client *client) +{ + struct egalax_ts *ts = i2c_get_clientdata(client); + + free_irq(client->irq, ts); + + input_unregister_device(ts->input_dev); + kfree(ts); + + return 0; +} + +static const struct i2c_device_id egalax_ts_id[] = { + { "egalax_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, egalax_ts_id); + +#ifdef CONFIG_PM_SLEEP +static int egalax_ts_suspend(struct device *dev) +{ + static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = { + 0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0 + }; + struct i2c_client *client = to_i2c_client(dev); + int ret; + + ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN); + return ret > 0 ? 0 : ret; +} + +static int egalax_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + return egalax_wake_up_device(client); +} +#endif + +static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); + +static struct i2c_driver egalax_ts_driver = { + .driver = { + .name = "egalax_ts", + .owner = THIS_MODULE, + .pm = &egalax_ts_pm_ops, + }, + .id_table = egalax_ts_id, + .probe = egalax_ts_probe, + .remove = __devexit_p(egalax_ts_remove), +}; + +static int __init egalax_ts_init(void) +{ + return i2c_add_driver(&egalax_ts_driver); +} + +static void __exit egalax_ts_exit(void) +{ + i2c_del_driver(&egalax_ts_driver); +} + +module_init(egalax_ts_init); +module_exit(egalax_ts_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c index 62811de6f18..81e33862394 100644 --- a/drivers/input/touchscreen/htcpen.c +++ b/drivers/input/touchscreen/htcpen.c @@ -47,12 +47,6 @@ static int invert_y; module_param(invert_y, bool, 0644); MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted"); -static struct pnp_device_id pnp_ids[] = { - { .id = "PNP0cc0" }, - { .id = "" } -}; -MODULE_DEVICE_TABLE(pnp, pnp_ids); - static irqreturn_t htcpen_interrupt(int irq, void *handle) { struct input_dev *htcpen_dev = handle; @@ -237,6 +231,7 @@ static struct dmi_system_id __initdata htcshift_dmi_table[] = { }, { } }; +MODULE_DEVICE_TABLE(dmi, htcshift_dmi_table); static int __init htcpen_isa_init(void) { diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c index 327695268e0..3cd7a837f82 100644 --- a/drivers/input/touchscreen/intel-mid-touch.c +++ b/drivers/input/touchscreen/intel-mid-touch.c @@ -664,18 +664,7 @@ static struct platform_driver mrstouch_driver = { .probe = mrstouch_probe, .remove = __devexit_p(mrstouch_remove), }; - -static int __init mrstouch_init(void) -{ - return platform_driver_register(&mrstouch_driver); -} -module_init(mrstouch_init); - -static void __exit mrstouch_exit(void) -{ - platform_driver_unregister(&mrstouch_driver); -} -module_exit(mrstouch_exit); +module_platform_driver(mrstouch_driver); MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com"); MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver"); diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index 50076c2d59e..c3848ad2325 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -172,16 +172,4 @@ static struct platform_driver jornada720_ts_driver = { .owner = THIS_MODULE, }, }; - -static int __init jornada720_ts_init(void) -{ - return platform_driver_register(&jornada720_ts_driver); -} - -static void __exit jornada720_ts_exit(void) -{ - platform_driver_unregister(&jornada720_ts_driver); -} - -module_init(jornada720_ts_init); -module_exit(jornada720_ts_exit); +module_platform_driver(jornada720_ts_driver); diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c index 0a484ed5295..afcd0691ec6 100644 --- a/drivers/input/touchscreen/lpc32xx_ts.c +++ b/drivers/input/touchscreen/lpc32xx_ts.c @@ -392,18 +392,7 @@ static struct platform_driver lpc32xx_ts_driver = { .pm = LPC32XX_TS_PM_OPS, }, }; - -static int __init lpc32xx_ts_init(void) -{ - return platform_driver_register(&lpc32xx_ts_driver); -} -module_init(lpc32xx_ts_init); - -static void __exit lpc32xx_ts_exit(void) -{ - platform_driver_unregister(&lpc32xx_ts_driver); -} -module_exit(lpc32xx_ts_exit); +module_platform_driver(lpc32xx_ts_driver); MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com"); MODULE_DESCRIPTION("LPC32XX TSC Driver"); diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index e966c29ff1b..7d2b2136e5a 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -302,19 +302,7 @@ static struct platform_driver mainstone_wm97xx_driver = { .name = "wm97xx-touch", }, }; - -static int __init mainstone_wm97xx_init(void) -{ - return platform_driver_register(&mainstone_wm97xx_driver); -} - -static void __exit mainstone_wm97xx_exit(void) -{ - platform_driver_unregister(&mainstone_wm97xx_driver); -} - -module_init(mainstone_wm97xx_init); -module_exit(mainstone_wm97xx_exit); +module_platform_driver(mainstone_wm97xx_driver); /* Module information */ MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>"); diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index ede02743eac..68f86f7dabb 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -240,18 +240,7 @@ static struct platform_driver mc13783_ts_driver = { .name = MC13783_TS_NAME, }, }; - -static int __init mc13783_ts_init(void) -{ - return platform_driver_probe(&mc13783_ts_driver, &mc13783_ts_probe); -} -module_init(mc13783_ts_init); - -static void __exit mc13783_ts_exit(void) -{ - platform_driver_unregister(&mc13783_ts_driver); -} -module_exit(mc13783_ts_exit); +module_platform_driver(mc13783_ts_driver); MODULE_DESCRIPTION("MC13783 input touchscreen driver"); MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index 5803bd0c1cc..5226194aa78 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -36,7 +36,6 @@ struct migor_ts_priv { struct i2c_client *client; struct input_dev *input; - struct delayed_work work; int irq; }; @@ -44,15 +43,24 @@ static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11, 0x01, 0x06, 0x07, }; static const u_int8_t migor_ts_dis_seq[17] = { }; -static void migor_ts_poscheck(struct work_struct *work) +static irqreturn_t migor_ts_isr(int irq, void *dev_id) { - struct migor_ts_priv *priv = container_of(work, - struct migor_ts_priv, - work.work); + struct migor_ts_priv *priv = dev_id; unsigned short xpos, ypos; unsigned char event; u_int8_t buf[16]; + /* + * The touch screen controller chip is hooked up to the CPU + * using I2C and a single interrupt line. The interrupt line + * is pulled low whenever someone taps the screen. To deassert + * the interrupt line we need to acknowledge the interrupt by + * communicating with the controller over the slow i2c bus. + * + * Since I2C bus controller may sleep we are using threaded + * IRQ here. + */ + memset(buf, 0, sizeof(buf)); /* Set Index 0 */ @@ -72,41 +80,25 @@ static void migor_ts_poscheck(struct work_struct *work) xpos = ((buf[11] & 0x03) << 8 | buf[10]); event = buf[12]; - if (event == EVENT_PENDOWN || event == EVENT_REPEAT) { + switch (event) { + case EVENT_PENDOWN: + case EVENT_REPEAT: input_report_key(priv->input, BTN_TOUCH, 1); input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/ input_report_abs(priv->input, ABS_Y, xpos); input_sync(priv->input); - } else if (event == EVENT_PENUP) { + break; + + case EVENT_PENUP: input_report_key(priv->input, BTN_TOUCH, 0); input_sync(priv->input); + break; } - out: - enable_irq(priv->irq); -} - -static irqreturn_t migor_ts_isr(int irq, void *dev_id) -{ - struct migor_ts_priv *priv = dev_id; - - /* the touch screen controller chip is hooked up to the cpu - * using i2c and a single interrupt line. the interrupt line - * is pulled low whenever someone taps the screen. to deassert - * the interrupt line we need to acknowledge the interrupt by - * communicating with the controller over the slow i2c bus. - * - * we can't acknowledge from interrupt context since the i2c - * bus controller may sleep, so we just disable the interrupt - * here and handle the acknowledge using delayed work. - */ - - disable_irq_nosync(irq); - schedule_delayed_work(&priv->work, HZ / 20); + out: return IRQ_HANDLED; } - static int migor_ts_open(struct input_dev *dev) { struct migor_ts_priv *priv = input_get_drvdata(dev); @@ -131,15 +123,6 @@ static void migor_ts_close(struct input_dev *dev) disable_irq(priv->irq); - /* cancel pending work and wait for migor_ts_poscheck() to finish */ - if (cancel_delayed_work_sync(&priv->work)) { - /* - * if migor_ts_poscheck was canceled we need to enable IRQ - * here to balance disable done in migor_ts_isr. - */ - enable_irq(priv->irq); - } - /* disable controller */ i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq)); @@ -154,23 +137,20 @@ static int migor_ts_probe(struct i2c_client *client, int error; priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&client->dev, "failed to allocate driver data\n"); - error = -ENOMEM; - goto err0; - } - - dev_set_drvdata(&client->dev, priv); - input = input_allocate_device(); - if (!input) { - dev_err(&client->dev, "Failed to allocate input device.\n"); + if (!priv || !input) { + dev_err(&client->dev, "failed to allocate memory\n"); error = -ENOMEM; - goto err1; + goto err_free_mem; } + priv->client = client; + priv->input = input; + priv->irq = client->irq; + input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + __set_bit(BTN_TOUCH, input->keybit); input_set_abs_params(input, ABS_X, 95, 955, 0, 0); input_set_abs_params(input, ABS_Y, 85, 935, 0, 0); @@ -184,39 +164,34 @@ static int migor_ts_probe(struct i2c_client *client, input_set_drvdata(input, priv); - priv->client = client; - priv->input = input; - INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck); - priv->irq = client->irq; - - error = input_register_device(input); - if (error) - goto err1; - - error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW, - client->name, priv); + error = request_threaded_irq(priv->irq, NULL, migor_ts_isr, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + client->name, priv); if (error) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); - goto err2; + goto err_free_mem; } + error = input_register_device(input); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, priv); device_init_wakeup(&client->dev, 1); + return 0; - err2: - input_unregister_device(input); - input = NULL; /* so we dont try to free it below */ - err1: + err_free_irq: + free_irq(priv->irq, priv); + err_free_mem: input_free_device(input); kfree(priv); - err0: - dev_set_drvdata(&client->dev, NULL); return error; } static int migor_ts_remove(struct i2c_client *client) { - struct migor_ts_priv *priv = dev_get_drvdata(&client->dev); + struct migor_ts_priv *priv = i2c_get_clientdata(client); free_irq(priv->irq, priv); input_unregister_device(priv->input); @@ -230,7 +205,7 @@ static int migor_ts_remove(struct i2c_client *client) static int migor_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct migor_ts_priv *priv = dev_get_drvdata(&client->dev); + struct migor_ts_priv *priv = i2c_get_clientdata(client); if (device_may_wakeup(&client->dev)) enable_irq_wake(priv->irq); @@ -241,7 +216,7 @@ static int migor_ts_suspend(struct device *dev) static int migor_ts_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); - struct migor_ts_priv *priv = dev_get_drvdata(&client->dev); + struct migor_ts_priv *priv = i2c_get_clientdata(client); if (device_may_wakeup(&client->dev)) disable_irq_wake(priv->irq); diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c index ea6ef16e59b..f57aeb80f7e 100644 --- a/drivers/input/touchscreen/pcap_ts.c +++ b/drivers/input/touchscreen/pcap_ts.c @@ -252,19 +252,7 @@ static struct platform_driver pcap_ts_driver = { .pm = PCAP_TS_PM_OPS, }, }; - -static int __init pcap_ts_init(void) -{ - return platform_driver_register(&pcap_ts_driver); -} - -static void __exit pcap_ts_exit(void) -{ - platform_driver_unregister(&pcap_ts_driver); -} - -module_init(pcap_ts_init); -module_exit(pcap_ts_exit); +module_platform_driver(pcap_ts_driver); MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver"); MODULE_AUTHOR("Daniel Ribeiro / Harald Welte"); diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c new file mode 100644 index 00000000000..d5ac09a1ee5 --- /dev/null +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -0,0 +1,239 @@ +/* + * Driver for Pixcir I2C touchscreen controllers. + * + * Copyright (C) 2010-2011 Pixcir, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/pixcir_ts.h> + +struct pixcir_i2c_ts_data { + struct i2c_client *client; + struct input_dev *input; + const struct pixcir_ts_platform_data *chip; + bool exiting; +}; + +static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) +{ + struct pixcir_i2c_ts_data *tsdata = data; + u8 rdbuf[10], wrbuf[1] = { 0 }; + u8 touch; + int ret; + + ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); + if (ret != sizeof(wrbuf)) { + dev_err(&tsdata->client->dev, + "%s: i2c_master_send failed(), ret=%d\n", + __func__, ret); + return; + } + + ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf)); + if (ret != sizeof(rdbuf)) { + dev_err(&tsdata->client->dev, + "%s: i2c_master_recv failed(), ret=%d\n", + __func__, ret); + return; + } + + touch = rdbuf[0]; + if (touch) { + u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; + u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; + u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; + u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; + + input_report_key(tsdata->input, BTN_TOUCH, 1); + input_report_abs(tsdata->input, ABS_X, posx1); + input_report_abs(tsdata->input, ABS_Y, posy1); + + input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); + input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); + input_mt_sync(tsdata->input); + + if (touch == 2) { + input_report_abs(tsdata->input, + ABS_MT_POSITION_X, posx2); + input_report_abs(tsdata->input, + ABS_MT_POSITION_Y, posy2); + input_mt_sync(tsdata->input); + } + } else { + input_report_key(tsdata->input, BTN_TOUCH, 0); + } + + input_sync(tsdata->input); +} + +static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) +{ + struct pixcir_i2c_ts_data *tsdata = dev_id; + + while (!tsdata->exiting) { + pixcir_ts_poscheck(tsdata); + + if (tsdata->chip->attb_read_val()) + break; + + msleep(20); + } + + return IRQ_HANDLED; +} + +#ifdef CONFIG_PM_SLEEP +static int pixcir_i2c_ts_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int pixcir_i2c_ts_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops, + pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume); + +static int __devinit pixcir_i2c_ts_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct pixcir_ts_platform_data *pdata = client->dev.platform_data; + struct pixcir_i2c_ts_data *tsdata; + struct input_dev *input; + int error; + + if (!pdata) { + dev_err(&client->dev, "platform data not defined\n"); + return -EINVAL; + } + + tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL); + input = input_allocate_device(); + if (!tsdata || !input) { + dev_err(&client->dev, "Failed to allocate driver data!\n"); + error = -ENOMEM; + goto err_free_mem; + } + + tsdata->client = client; + tsdata->input = input; + tsdata->chip = pdata; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + input_set_abs_params(input, ABS_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input, ABS_Y, 0, pdata->y_max, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + + input_set_drvdata(input, tsdata); + + error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr, + IRQF_TRIGGER_FALLING, + client->name, tsdata); + if (error) { + dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); + goto err_free_mem; + } + + error = input_register_device(input); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, tsdata); + device_init_wakeup(&client->dev, 1); + + return 0; + +err_free_irq: + free_irq(client->irq, tsdata); +err_free_mem: + input_free_device(input); + kfree(tsdata); + return error; +} + +static int __devexit pixcir_i2c_ts_remove(struct i2c_client *client) +{ + struct pixcir_i2c_ts_data *tsdata = i2c_get_clientdata(client); + + device_init_wakeup(&client->dev, 0); + + tsdata->exiting = true; + mb(); + free_irq(client->irq, tsdata); + + input_unregister_device(tsdata->input); + kfree(tsdata); + + return 0; +} + +static const struct i2c_device_id pixcir_i2c_ts_id[] = { + { "pixcir_ts", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id); + +static struct i2c_driver pixcir_i2c_ts_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "pixcir_ts", + .pm = &pixcir_dev_pm_ops, + }, + .probe = pixcir_i2c_ts_probe, + .remove = __devexit_p(pixcir_i2c_ts_remove), + .id_table = pixcir_i2c_ts_id, +}; + +static int __init pixcir_i2c_ts_init(void) +{ + return i2c_add_driver(&pixcir_i2c_ts_driver); +} +module_init(pixcir_i2c_ts_init); + +static void __exit pixcir_i2c_ts_exit(void) +{ + i2c_del_driver(&pixcir_i2c_ts_driver); +} +module_exit(pixcir_i2c_ts_exit); + +MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>"); +MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 64ce697a345..bf1a0640006 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -432,19 +432,7 @@ static struct platform_driver s3c_ts_driver = { .probe = s3c2410ts_probe, .remove = __devexit_p(s3c2410ts_remove), }; - -static int __init s3c2410ts_init(void) -{ - return platform_driver_register(&s3c_ts_driver); -} - -static void __exit s3c2410ts_exit(void) -{ - platform_driver_unregister(&s3c_ts_driver); -} - -module_init(s3c2410ts_init); -module_exit(s3c2410ts_exit); +module_platform_driver(s3c_ts_driver); MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, " "Ben Dooks <ben@simtec.co.uk>, " diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index ae88e13c99f..692b685720c 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -379,20 +379,7 @@ static struct platform_driver stmpe_ts_driver = { .probe = stmpe_input_probe, .remove = __devexit_p(stmpe_ts_remove), }; - -static int __init stmpe_ts_init(void) -{ - return platform_driver_register(&stmpe_ts_driver); -} - -module_init(stmpe_ts_init); - -static void __exit stmpe_ts_exit(void) -{ - platform_driver_unregister(&stmpe_ts_driver); -} - -module_exit(stmpe_ts_exit); +module_platform_driver(stmpe_ts_driver); MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>"); MODULE_DESCRIPTION("STMPEXXX touchscreen driver"); diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c index 0e8f63e5b36..7e748809735 100644 --- a/drivers/input/touchscreen/tnetv107x-ts.c +++ b/drivers/input/touchscreen/tnetv107x-ts.c @@ -378,19 +378,7 @@ static struct platform_driver tsc_driver = { .driver.name = "tnetv107x-ts", .driver.owner = THIS_MODULE, }; - -static int __init tsc_init(void) -{ - return platform_driver_register(&tsc_driver); -} - -static void __exit tsc_exit(void) -{ - platform_driver_unregister(&tsc_driver); -} - -module_init(tsc_init); -module_exit(tsc_exit); +module_platform_driver(tsc_driver); MODULE_AUTHOR("Cyril Chemparathy"); MODULE_DESCRIPTION("TNETV107X Touchscreen Driver"); diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index 43031492d73..6c6f6d8ea9b 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -371,18 +371,7 @@ static struct platform_driver tps6507x_ts_driver = { .probe = tps6507x_ts_probe, .remove = __devexit_p(tps6507x_ts_remove), }; - -static int __init tps6507x_ts_init(void) -{ - return platform_driver_register(&tps6507x_ts_driver); -} -module_init(tps6507x_ts_init); - -static void __exit tps6507x_ts_exit(void) -{ - platform_driver_unregister(&tps6507x_ts_driver); -} -module_exit(tps6507x_ts_exit); +module_platform_driver(tps6507x_ts_driver); MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>"); MODULE_DESCRIPTION("TPS6507x - TouchScreen driver"); diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 3b5b5df04dd..d2b57536fee 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -20,24 +20,24 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/completion.h> #include <linux/delay.h> +#include <linux/sched.h> +#include <linux/wait.h> #include <linux/input.h> #include <linux/device.h> #include <linux/interrupt.h> -#include <linux/suspend.h> -#include <linux/kthread.h> -#include <linux/freezer.h> #include <linux/ucb1400.h> +#define UCB1400_TS_POLL_PERIOD 10 /* ms */ + static int adcsync; static int ts_delay = 55; /* us */ static int ts_delay_pressure; /* us */ /* Switch to interrupt mode. */ -static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97) +static void ucb1400_ts_mode_int(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ac97, UCB_TS_CR, + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | UCB_TS_CR_MODE_INT); @@ -47,13 +47,15 @@ static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97) * Switch to pressure mode, and read pressure. We don't need to wait * here, since both plates are being driven. */ -static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); + udelay(ts_delay_pressure); + return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync); } @@ -63,7 +65,7 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb) * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ -static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | @@ -86,7 +88,7 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb) * gives a faster response time. Even so, we need to wait about 55us * for things to stabilise. */ -static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) +static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | @@ -107,7 +109,7 @@ static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb) * Switch to X plate resistance mode. Set MX to ground, PX to * supply. Measure current. */ -static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | @@ -119,7 +121,7 @@ static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb) * Switch to Y plate resistance mode. Set MY to ground, PY to * supply. Measure current. */ -static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) +static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) { ucb1400_reg_write(ucb->ac97, UCB_TS_CR, UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | @@ -127,26 +129,26 @@ static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb) return ucb1400_adc_read(ucb->ac97, 0, adcsync); } -static inline int ucb1400_ts_pen_up(struct snd_ac97 *ac97) +static int ucb1400_ts_pen_up(struct ucb1400_ts *ucb) { - unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR); + unsigned short val = ucb1400_reg_read(ucb->ac97, UCB_TS_CR); return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW); } -static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97) +static void ucb1400_ts_irq_enable(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX); - ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0); - ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, UCB_IE_TSPX); + ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_TSPX); } -static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97) +static void ucb1400_ts_irq_disable(struct ucb1400_ts *ucb) { - ucb1400_reg_write(ac97, UCB_IE_FAL, 0); + ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0); } -static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y) +static void ucb1400_ts_report_event(struct input_dev *idev, u16 pressure, u16 x, u16 y) { input_report_abs(idev, ABS_X, x); input_report_abs(idev, ABS_Y, y); @@ -162,7 +164,7 @@ static void ucb1400_ts_event_release(struct input_dev *idev) input_sync(idev); } -static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb) +static void ucb1400_clear_pending_irq(struct ucb1400_ts *ucb) { unsigned int isr; @@ -171,32 +173,34 @@ static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb) ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); if (isr & UCB_IE_TSPX) - ucb1400_ts_irq_disable(ucb->ac97); + ucb1400_ts_irq_disable(ucb); else - dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr); - enable_irq(ucb->irq); + dev_dbg(&ucb->ts_idev->dev, + "ucb1400: unexpected IE_STATUS = %#x\n", isr); } -static int ucb1400_ts_thread(void *_ucb) +/* + * A restriction with interrupts exists when using the ucb1400, as + * the codec read/write routines may sleep while waiting for codec + * access completion and uses semaphores for access control to the + * AC97 bus. Therefore the driver is forced to use threaded interrupt + * handler. + */ +static irqreturn_t ucb1400_irq(int irqnr, void *devid) { - struct ucb1400_ts *ucb = _ucb; - struct task_struct *tsk = current; - int valid = 0; - struct sched_param param = { .sched_priority = 1 }; + struct ucb1400_ts *ucb = devid; + unsigned int x, y, p; + bool penup; - sched_setscheduler(tsk, SCHED_FIFO, ¶m); + if (unlikely(irqnr != ucb->irq)) + return IRQ_NONE; - set_freezable(); - while (!kthread_should_stop()) { - unsigned int x, y, p; - long timeout; + ucb1400_clear_pending_irq(ucb); - ucb->ts_restart = 0; + /* Start with a small delay before checking pendown state */ + msleep(UCB1400_TS_POLL_PERIOD); - if (ucb->irq_pending) { - ucb->irq_pending = 0; - ucb1400_handle_pending_irq(ucb); - } + while (!ucb->stopped && !(penup = ucb1400_ts_pen_up(ucb))) { ucb1400_adc_enable(ucb->ac97); x = ucb1400_ts_read_xpos(ucb); @@ -204,91 +208,62 @@ static int ucb1400_ts_thread(void *_ucb) p = ucb1400_ts_read_pressure(ucb); ucb1400_adc_disable(ucb->ac97); - /* Switch back to interrupt mode. */ - ucb1400_ts_mode_int(ucb->ac97); - - msleep(10); - - if (ucb1400_ts_pen_up(ucb->ac97)) { - ucb1400_ts_irq_enable(ucb->ac97); - - /* - * If we spat out a valid sample set last time, - * spit out a "pen off" sample here. - */ - if (valid) { - ucb1400_ts_event_release(ucb->ts_idev); - valid = 0; - } - - timeout = MAX_SCHEDULE_TIMEOUT; - } else { - valid = 1; - ucb1400_ts_evt_add(ucb->ts_idev, p, x, y); - timeout = msecs_to_jiffies(10); - } + ucb1400_ts_report_event(ucb->ts_idev, p, x, y); - wait_event_freezable_timeout(ucb->ts_wait, - ucb->irq_pending || ucb->ts_restart || - kthread_should_stop(), timeout); + wait_event_timeout(ucb->ts_wait, ucb->stopped, + msecs_to_jiffies(UCB1400_TS_POLL_PERIOD)); } - /* Send the "pen off" if we are stopping with the pen still active */ - if (valid) - ucb1400_ts_event_release(ucb->ts_idev); + ucb1400_ts_event_release(ucb->ts_idev); - ucb->ts_task = NULL; - return 0; + if (!ucb->stopped) { + /* Switch back to interrupt mode. */ + ucb1400_ts_mode_int(ucb); + ucb1400_ts_irq_enable(ucb); + } + + return IRQ_HANDLED; } -/* - * A restriction with interrupts exists when using the ucb1400, as - * the codec read/write routines may sleep while waiting for codec - * access completion and uses semaphores for access control to the - * AC97 bus. A complete codec read cycle could take anywhere from - * 60 to 100uSec so we *definitely* don't want to spin inside the - * interrupt handler waiting for codec access. So, we handle the - * interrupt by scheduling a RT kernel thread to run in process - * context instead of interrupt context. - */ -static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid) +static void ucb1400_ts_stop(struct ucb1400_ts *ucb) { - struct ucb1400_ts *ucb = devid; + /* Signal IRQ thread to stop polling and disable the handler. */ + ucb->stopped = true; + mb(); + wake_up(&ucb->ts_wait); + disable_irq(ucb->irq); - if (irqnr == ucb->irq) { - disable_irq_nosync(ucb->irq); - ucb->irq_pending = 1; - wake_up(&ucb->ts_wait); - return IRQ_HANDLED; - } - return IRQ_NONE; + ucb1400_ts_irq_disable(ucb); + ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0); +} + +/* Must be called with ts->lock held */ +static void ucb1400_ts_start(struct ucb1400_ts *ucb) +{ + /* Tell IRQ thread that it may poll the device. */ + ucb->stopped = false; + mb(); + + ucb1400_ts_mode_int(ucb); + ucb1400_ts_irq_enable(ucb); + + enable_irq(ucb->irq); } static int ucb1400_ts_open(struct input_dev *idev) { struct ucb1400_ts *ucb = input_get_drvdata(idev); - int ret = 0; - BUG_ON(ucb->ts_task); + ucb1400_ts_start(ucb); - ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts"); - if (IS_ERR(ucb->ts_task)) { - ret = PTR_ERR(ucb->ts_task); - ucb->ts_task = NULL; - } - - return ret; + return 0; } static void ucb1400_ts_close(struct input_dev *idev) { struct ucb1400_ts *ucb = input_get_drvdata(idev); - if (ucb->ts_task) - kthread_stop(ucb->ts_task); - - ucb1400_ts_irq_disable(ucb->ac97); - ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0); + ucb1400_ts_stop(ucb); } #ifndef NO_IRQ @@ -299,7 +274,8 @@ static void ucb1400_ts_close(struct input_dev *idev) * Try to probe our interrupt, rather than relying on lots of * hard-coded machine dependencies. */ -static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb) +static int __devinit ucb1400_ts_detect_irq(struct ucb1400_ts *ucb, + struct platform_device *pdev) { unsigned long mask, timeout; @@ -321,7 +297,7 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb) UCB_ADC_DAT_VALID)) { cpu_relax(); if (time_after(jiffies, timeout)) { - printk(KERN_ERR "ucb1400: timed out in IRQ probe\n"); + dev_err(&pdev->dev, "timed out in IRQ probe\n"); probe_irq_off(mask); return -ENODEV; } @@ -342,11 +318,11 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb) return 0; } -static int ucb1400_ts_probe(struct platform_device *dev) +static int __devinit ucb1400_ts_probe(struct platform_device *pdev) { + struct ucb1400_ts *ucb = pdev->dev.platform_data; int error, x_res, y_res; u16 fcsr; - struct ucb1400_ts *ucb = dev->dev.platform_data; ucb->ts_idev = input_allocate_device(); if (!ucb->ts_idev) { @@ -356,27 +332,19 @@ static int ucb1400_ts_probe(struct platform_device *dev) /* Only in case the IRQ line wasn't supplied, try detecting it */ if (ucb->irq < 0) { - error = ucb1400_ts_detect_irq(ucb); + error = ucb1400_ts_detect_irq(ucb, pdev); if (error) { - printk(KERN_ERR "UCB1400: IRQ probe failed\n"); + dev_err(&pdev->dev, "IRQ probe failed\n"); goto err_free_devs; } } + dev_dbg(&pdev->dev, "found IRQ %d\n", ucb->irq); init_waitqueue_head(&ucb->ts_wait); - error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING, - "UCB1400", ucb); - if (error) { - printk(KERN_ERR "ucb1400: unable to grab irq%d: %d\n", - ucb->irq, error); - goto err_free_devs; - } - printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq); - input_set_drvdata(ucb->ts_idev, ucb); - ucb->ts_idev->dev.parent = &dev->dev; + ucb->ts_idev->dev.parent = &pdev->dev; ucb->ts_idev->name = "UCB1400 touchscreen interface"; ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97, AC97_VENDOR_ID1); @@ -398,12 +366,23 @@ static int ucb1400_ts_probe(struct platform_device *dev) x_res = ucb1400_ts_read_xres(ucb); y_res = ucb1400_ts_read_yres(ucb); ucb1400_adc_disable(ucb->ac97); - printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res); + dev_dbg(&pdev->dev, "x/y = %d/%d\n", x_res, y_res); input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0); input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0); input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0); + ucb1400_ts_stop(ucb); + + error = request_threaded_irq(ucb->irq, NULL, ucb1400_irq, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "UCB1400", ucb); + if (error) { + dev_err(&pdev->dev, + "unable to grab irq%d: %d\n", ucb->irq, error); + goto err_free_devs; + } + error = input_register_device(ucb->ts_idev); if (error) goto err_free_irq; @@ -416,56 +395,61 @@ err_free_devs: input_free_device(ucb->ts_idev); err: return error; - } -static int ucb1400_ts_remove(struct platform_device *dev) +static int __devexit ucb1400_ts_remove(struct platform_device *pdev) { - struct ucb1400_ts *ucb = dev->dev.platform_data; + struct ucb1400_ts *ucb = pdev->dev.platform_data; free_irq(ucb->irq, ucb); input_unregister_device(ucb->ts_idev); + return 0; } -#ifdef CONFIG_PM -static int ucb1400_ts_resume(struct platform_device *dev) +#ifdef CONFIG_PM_SLEEP +static int ucb1400_ts_suspend(struct device *dev) { - struct ucb1400_ts *ucb = dev->dev.platform_data; - - if (ucb->ts_task) { - /* - * Restart the TS thread to ensure the - * TS interrupt mode is set up again - * after sleep. - */ - ucb->ts_restart = 1; - wake_up(&ucb->ts_wait); - } + struct ucb1400_ts *ucb = dev->platform_data; + struct input_dev *idev = ucb->ts_idev; + + mutex_lock(&idev->mutex); + + if (idev->users) + ucb1400_ts_start(ucb); + + mutex_unlock(&idev->mutex); + return 0; +} + +static int ucb1400_ts_resume(struct device *dev) +{ + struct ucb1400_ts *ucb = dev->platform_data; + struct input_dev *idev = ucb->ts_idev; + + mutex_lock(&idev->mutex); + + if (idev->users) + ucb1400_ts_stop(ucb); + + mutex_unlock(&idev->mutex); return 0; } -#else -#define ucb1400_ts_resume NULL #endif +static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops, + ucb1400_ts_suspend, ucb1400_ts_resume); + static struct platform_driver ucb1400_ts_driver = { .probe = ucb1400_ts_probe, - .remove = ucb1400_ts_remove, - .resume = ucb1400_ts_resume, + .remove = __devexit_p(ucb1400_ts_remove), .driver = { .name = "ucb1400_ts", + .owner = THIS_MODULE, + .pm = &ucb1400_ts_pm_ops, }, }; - -static int __init ucb1400_ts_init(void) -{ - return platform_driver_register(&ucb1400_ts_driver); -} - -static void __exit ucb1400_ts_exit(void) -{ - platform_driver_unregister(&ucb1400_ts_driver); -} +module_platform_driver(ucb1400_ts_driver); module_param(adcsync, bool, 0444); MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin."); @@ -479,8 +463,5 @@ MODULE_PARM_DESC(ts_delay_pressure, "delay between panel setup and pressure read." " Default = 0us."); -module_init(ucb1400_ts_init); -module_exit(ucb1400_ts_exit); - MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index e539d92cc62..06cef3ccc63 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -16,6 +16,7 @@ * - JASTEC USB touch controller/DigiTech DTR-02U * - Zytronic capacitive touchscreen * - NEXIO/iNexio + * - Elo TouchSystems 2700 IntelliTouch * * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -138,6 +139,7 @@ enum { DEVTYPE_ZYTRONIC, DEVTYPE_TC45USB, DEVTYPE_NEXIO, + DEVTYPE_ELO, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -239,6 +241,10 @@ static const struct usb_device_id usbtouch_devices[] = { .driver_info = DEVTYPE_NEXIO}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO}, +#endif + {} }; @@ -945,6 +951,24 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt) /***************************************************************************** + * ELO part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + +static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[3] << 8) | pkt[2]; + dev->y = (pkt[5] << 8) | pkt[4]; + dev->touch = pkt[6] > 0; + dev->press = pkt[6]; + + return 1; +} +#endif + + +/***************************************************************************** * the different device descriptors */ #ifdef MULTI_PACKET @@ -953,6 +977,18 @@ static void usbtouch_process_multi(struct usbtouch_usb *usbtouch, #endif static struct usbtouch_device_info usbtouch_dev_info[] = { +#ifdef CONFIG_TOUCHSCREEN_USB_ELO + [DEVTYPE_ELO] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .max_press = 0xff, + .rept_size = 8, + .read_data = elo_read_data, + }, +#endif + #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX [DEVTYPE_EGALAX] = { .min_xc = 0x0, diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c index 217aa51135c..9396b21d0e8 100644 --- a/drivers/input/touchscreen/w90p910_ts.c +++ b/drivers/input/touchscreen/w90p910_ts.c @@ -331,19 +331,7 @@ static struct platform_driver w90x900ts_driver = { .owner = THIS_MODULE, }, }; - -static int __init w90x900ts_init(void) -{ - return platform_driver_register(&w90x900ts_driver); -} - -static void __exit w90x900ts_exit(void) -{ - platform_driver_unregister(&w90x900ts_driver); -} - -module_init(w90x900ts_init); -module_exit(w90x900ts_exit); +module_platform_driver(w90x900ts_driver); MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>"); MODULE_DESCRIPTION("w90p910 touch screen driver!"); diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c index 9175d49d254..4bc851a9dc3 100644 --- a/drivers/input/touchscreen/wm831x-ts.c +++ b/drivers/input/touchscreen/wm831x-ts.c @@ -401,18 +401,7 @@ static struct platform_driver wm831x_ts_driver = { .probe = wm831x_ts_probe, .remove = __devexit_p(wm831x_ts_remove), }; - -static int __init wm831x_ts_init(void) -{ - return platform_driver_register(&wm831x_ts_driver); -} -module_init(wm831x_ts_init); - -static void __exit wm831x_ts_exit(void) -{ - platform_driver_unregister(&wm831x_ts_driver); -} -module_exit(wm831x_ts_exit); +module_platform_driver(wm831x_ts_driver); /* Module information */ MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c index 0a707bbbbea..bf0869a7a78 100644 --- a/drivers/input/touchscreen/zylonite-wm97xx.c +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -224,19 +224,7 @@ static struct platform_driver zylonite_wm97xx_driver = { .name = "wm97xx-touch", }, }; - -static int __init zylonite_wm97xx_init(void) -{ - return platform_driver_register(&zylonite_wm97xx_driver); -} - -static void __exit zylonite_wm97xx_exit(void) -{ - platform_driver_unregister(&zylonite_wm97xx_driver); -} - -module_init(zylonite_wm97xx_init); -module_exit(zylonite_wm97xx_exit); +module_platform_driver(zylonite_wm97xx_driver); /* Module information */ MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); diff --git a/include/linux/input/auo-pixcir-ts.h b/include/linux/input/auo-pixcir-ts.h new file mode 100644 index 00000000000..75d4be71771 --- /dev/null +++ b/include/linux/input/auo-pixcir-ts.h @@ -0,0 +1,56 @@ +/* + * Driver for AUO in-cell touchscreens + * + * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de> + * + * based on auo_touch.h from Dell Streak kernel + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2008 QUALCOMM USA, INC. + * + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __AUO_PIXCIR_TS_H__ +#define __AUO_PIXCIR_TS_H__ + +/* + * Interrupt modes: + * periodical: interrupt is asserted periodicaly + * compare coordinates: interrupt is asserted when coordinates change + * indicate touch: interrupt is asserted during touch + */ +#define AUO_PIXCIR_INT_PERIODICAL 0x00 +#define AUO_PIXCIR_INT_COMP_COORD 0x01 +#define AUO_PIXCIR_INT_TOUCH_IND 0x02 + +/* + * @gpio_int interrupt gpio + * @int_setting one of AUO_PIXCIR_INT_* + * @init_hw hardwarespecific init + * @exit_hw hardwarespecific shutdown + * @x_max x-resolution + * @y_max y-resolution + */ +struct auo_pixcir_ts_platdata { + int gpio_int; + + int int_setting; + + void (*init_hw)(struct i2c_client *); + void (*exit_hw)(struct i2c_client *); + + unsigned int x_max; + unsigned int y_max; +}; + +#endif diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h new file mode 100644 index 00000000000..aad2fd44a61 --- /dev/null +++ b/include/linux/input/gp2ap002a00f.h @@ -0,0 +1,22 @@ +#ifndef _GP2AP002A00F_H_ +#define _GP2AP002A00F_H_ + +#include <linux/i2c.h> + +#define GP2A_I2C_NAME "gp2ap002a00f" + +/** + * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data + * @vout_gpio: The gpio connected to the object detected pin (VOUT) + * @wakeup: Set to true if the proximity can wake the device from suspend + * @hw_setup: Callback for setting up hardware such as gpios and vregs + * @hw_shutdown: Callback for properly shutting down hardware + */ +struct gp2a_platform_data { + int vout_gpio; + bool wakeup; + int (*hw_setup)(struct i2c_client *client); + int (*hw_shutdown)(struct i2c_client *client); +}; + +#endif diff --git a/include/linux/input/gpio_tilt.h b/include/linux/input/gpio_tilt.h new file mode 100644 index 00000000000..c1cc52d380e --- /dev/null +++ b/include/linux/input/gpio_tilt.h @@ -0,0 +1,73 @@ +#ifndef _INPUT_GPIO_TILT_H +#define _INPUT_GPIO_TILT_H + +/** + * struct gpio_tilt_axis - Axis used by the tilt switch + * @axis: Constant describing the axis, e.g. ABS_X + * @min: minimum value for abs_param + * @max: maximum value for abs_param + * @fuzz: fuzz value for abs_param + * @flat: flat value for abs_param + */ +struct gpio_tilt_axis { + int axis; + int min; + int max; + int fuzz; + int flat; +}; + +/** + * struct gpio_tilt_state - state description + * @gpios: bitfield of gpio target-states for the value + * @axes: array containing the axes settings for the gpio state + * The array indizes must correspond to the axes defined + * in platform_data + * + * This structure describes a supported axis settings + * and the necessary gpio-state which represent it. + * + * The n-th bit in the bitfield describes the state of the n-th GPIO + * from the gpios-array defined in gpio_regulator_config below. + */ +struct gpio_tilt_state { + int gpios; + int *axes; +}; + +/** + * struct gpio_tilt_platform_data + * @gpios: Array containing the gpios determining the tilt state + * @nr_gpios: Number of gpios + * @axes: Array of gpio_tilt_axis descriptions + * @nr_axes: Number of axes + * @states: Array of gpio_tilt_state entries describing + * the gpio state for specific tilts + * @nr_states: Number of states available + * @debounce_interval: debounce ticks interval in msecs + * @poll_interval: polling interval in msecs - for polling driver only + * @enable: callback to enable the tilt switch + * @disable: callback to disable the tilt switch + * + * This structure contains gpio-tilt-switch configuration + * information that must be passed by platform code to the + * gpio-tilt input driver. + */ +struct gpio_tilt_platform_data { + struct gpio *gpios; + int nr_gpios; + + struct gpio_tilt_axis *axes; + int nr_axes; + + struct gpio_tilt_state *states; + int nr_states; + + int debounce_interval; + + unsigned int poll_interval; + int (*enable)(struct device *dev); + void (*disable)(struct device *dev); +}; + +#endif diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h new file mode 100644 index 00000000000..7163d91c037 --- /dev/null +++ b/include/linux/input/pixcir_ts.h @@ -0,0 +1,10 @@ +#ifndef _PIXCIR_I2C_TS_H +#define _PIXCIR_I2C_TS_H + +struct pixcir_ts_platform_data { + int (*attb_read_val)(void); + int x_max; + int y_max; +}; + +#endif diff --git a/include/linux/input/samsung-keypad.h b/include/linux/input/samsung-keypad.h new file mode 100644 index 00000000000..f25619bfd8a --- /dev/null +++ b/include/linux/input/samsung-keypad.h @@ -0,0 +1,43 @@ +/* + * Samsung Keypad platform data definitions + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __SAMSUNG_KEYPAD_H +#define __SAMSUNG_KEYPAD_H + +#include <linux/input/matrix_keypad.h> + +#define SAMSUNG_MAX_ROWS 8 +#define SAMSUNG_MAX_COLS 8 + +/** + * struct samsung_keypad_platdata - Platform device data for Samsung Keypad. + * @keymap_data: pointer to &matrix_keymap_data. + * @rows: number of keypad row supported. + * @cols: number of keypad col supported. + * @no_autorepeat: disable key autorepeat. + * @wakeup: controls whether the device should be set up as wakeup source. + * @cfg_gpio: configure the GPIO. + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio. + */ +struct samsung_keypad_platdata { + const struct matrix_keymap_data *keymap_data; + unsigned int rows; + unsigned int cols; + bool no_autorepeat; + bool wakeup; + + void (*cfg_gpio)(unsigned int rows, unsigned int cols); +}; + +#endif /* __SAMSUNG_KEYPAD_H */ diff --git a/include/linux/input/tca8418_keypad.h b/include/linux/input/tca8418_keypad.h new file mode 100644 index 00000000000..e71a85dc2cb --- /dev/null +++ b/include/linux/input/tca8418_keypad.h @@ -0,0 +1,44 @@ +/* + * TCA8418 keypad platform support + * + * Copyright (C) 2011 Fuel7, Inc. All rights reserved. + * + * Author: Kyle Manna <kyle.manna@fuel7.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * If you can't comply with GPLv2, alternative licensing terms may be + * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary + * alternative licensing inquiries. + */ + +#ifndef _TCA8418_KEYPAD_H +#define _TCA8418_KEYPAD_H + +#include <linux/types.h> +#include <linux/input/matrix_keypad.h> + +#define TCA8418_I2C_ADDR 0x34 +#define TCA8418_NAME "tca8418_keypad" + +struct tca8418_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + unsigned rows; + unsigned cols; + bool rep; + bool irq_is_gpio; +}; + +#endif diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index 5c75153f944..d21b33c4c6c 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -96,13 +96,11 @@ struct ucb1400_gpio { struct ucb1400_ts { struct input_dev *ts_idev; - struct task_struct *ts_task; int id; - wait_queue_head_t ts_wait; - unsigned int ts_restart:1; int irq; - unsigned int irq_pending; /* not bit field shared */ struct snd_ac97 *ac97; + wait_queue_head_t ts_wait; + bool stopped; }; struct ucb1400 { |