Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits)
  amd74xx: remove /proc/ide/amd74xx
  amd74xx/via82cxxx: don't initialize drive->dn
  sis5513: remove /proc/ide/sis
  ide: remove CONFIG_IDEDMA_ONLYDISK
  ide: add "hdx=nodma" kernel parameter
  ide: remove hwif->autodma and drive->autodma
  ide: remove "idex=dma" kernel parameter
  ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED
  ide: use PCI_VDEVICE() macro
  sis5513: clear prefetch and postwrite for ATAPI devices
  it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
  ide: unexport noautodma
  ide: unexport ide_tune_dma
  ide: remove ->ide_dma_check (take 2)
  ide-pmac: add PIO autotune fallback to ->ide_dma_check
  ide-cris: add PIO autotune fallback to ->ide_dma_check
  sl82c105: add PIO autotune fallback to ->ide_dma_check
  cs5530/sc1200: add PIO autotune fallback to ->ide_dma_check
  ide: remove ide_use_fast_pio()
  ide: remove drive->init_speed zeroing
  ...

48 files changed, 449 insertions, 1699 deletions

diff --git a/Documentation/ide.txt b/Documentation/ide.txt
index 3bb9f9c9861..1d50f23a5ca 100644
--- a/Documentation/ide.txt
+++ b/Documentation/ide.txt
@@ -242,6 +242,8 @@ Summary of ide driver parameters for kernel command line
 			  and quite likely to cause trouble with
 			  older/odd IDE drives.
 
+ "hdx=nodma"		: disallow DMA
+
  "hdx=swapdata"		: when the drive is a disk, byte swap all data
 
  "hdx=bswap"		: same as above..........
@@ -278,8 +280,6 @@ Summary of ide driver parameters for kernel command line
  "idex=four"		: four drives on idex and ide(x^1) share same ports
 			
  "idex=reset"		: reset interface after probe
- 
- "idex=dma"		: automatically configure/use DMA if possible.
 
  "idex=ata66"		: informs the interface that it has an 80c cable
 			  for chipsets that are ATA-66 capable, but the
@@ -288,8 +288,6 @@ Summary of ide driver parameters for kernel command line
 
  "ide=reverse"		: formerly called to pci sub-system, but now local.
 
- "ide=nodma"		: disable DMA globally for the IDE subsystem.
-
 The following are valid ONLY on ide0, which usually corresponds
 to the first ATA interface found on the particular host, and the defaults for
 the base,ctl ports must not be altered.
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 8982c093243..6d9fd92763f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -435,24 +435,6 @@ config BLK_DEV_IDEDMA_PCI
 	bool
 	select BLK_DEV_IDEPCI
 
-config BLK_DEV_IDEDMA_FORCED
-	bool "Force enable legacy 2.0.X HOSTS to use DMA"
-	depends on BLK_DEV_IDEDMA_PCI
-	help
-	  This is an old piece of lost code from Linux 2.0 Kernels.
-
-	  Generally say N here.
-
-# TODO: remove it
-config IDEDMA_ONLYDISK
-	bool "Enable DMA only for disks "
-	depends on BLK_DEV_IDEDMA_PCI
-	help
-	  This is used if you know your ATAPI Devices are going to fail DMA
-	  Transfers.
-
-	  Generally say N here.
-
 config BLK_DEV_AEC62XX
 	tristate "AEC62XX chipset support"
 	select BLK_DEV_IDEDMA_PCI
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index bd1f5b67037..e4875cef78b 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -309,14 +309,6 @@ static int icside_dma_on(ide_drive_t *drive)
 	return 0;
 }
 
-static int icside_dma_check(ide_drive_t *drive)
-{
-	if (ide_tune_dma(drive))
-		return 0;
-
-	return -1;
-}
-
 static int icside_dma_end(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
@@ -423,8 +415,6 @@ static void icside_dma_lost_irq(ide_drive_t *drive)
 
 static void icside_dma_init(ide_hwif_t *hwif)
 {
-	printk("    %s: SG-DMA", hwif->name);
-
 	hwif->atapi_dma		= 1;
 	hwif->mwdma_mask	= 7; /* MW0..2 */
 	hwif->swdma_mask	= 7; /* SW0..2 */
@@ -432,9 +422,7 @@ static void icside_dma_init(ide_hwif_t *hwif)
 	hwif->dmatable_cpu	= NULL;
 	hwif->dmatable_dma	= 0;
 	hwif->set_dma_mode	= icside_set_dma_mode;
-	hwif->autodma		= 1;
 
-	hwif->ide_dma_check	= icside_dma_check;
 	hwif->dma_host_off	= icside_dma_host_off;
 	hwif->dma_off_quietly	= icside_dma_off_quietly;
 	hwif->dma_host_on	= icside_dma_host_on;
@@ -446,11 +434,6 @@ static void icside_dma_init(ide_hwif_t *hwif)
 	hwif->ide_dma_test_irq	= icside_dma_test_irq;
 	hwif->dma_timeout	= icside_dma_timeout;
 	hwif->dma_lost_irq	= icside_dma_lost_irq;
-
-	hwif->drives[0].autodma = hwif->autodma;
-	hwif->drives[1].autodma = hwif->autodma;
-
-	printk(" capable%s\n", hwif->autodma ? ", auto-enable" : "");
 }
 #else
 #define icside_dma_init(hwif)	(0)
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index c306c9f534a..06c75f18eb8 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -664,7 +664,6 @@ cris_ide_inb(unsigned long reg)
 	return (unsigned char)cris_ide_inw(reg);
 }
 
-static int cris_dma_check (ide_drive_t *drive);
 static int cris_dma_end (ide_drive_t *drive);
 static int cris_dma_setup (ide_drive_t *drive);
 static void cris_dma_exec_cmd (ide_drive_t *drive, u8 command);
@@ -792,7 +791,6 @@ init_e100_ide (void)
 		hwif->ata_output_data = &cris_ide_output_data;
 		hwif->atapi_input_bytes = &cris_atapi_input_bytes;
 		hwif->atapi_output_bytes = &cris_atapi_output_bytes;
-		hwif->ide_dma_check = &cris_dma_check;
 		hwif->ide_dma_end = &cris_dma_end;
 		hwif->dma_setup = &cris_dma_setup;
 		hwif->dma_exec_cmd = &cris_dma_exec_cmd;
@@ -808,11 +806,10 @@ init_e100_ide (void)
 		hwif->dma_off_quietly = &cris_dma_off;
 		hwif->cbl = ATA_CBL_PATA40;
 		hwif->pio_mask = ATA_PIO4,
+		hwif->drives[0].autotune = 1;
+		hwif->drives[1].autotune = 1;
 		hwif->ultra_mask = cris_ultra_mask;
 		hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
-		hwif->autodma = 1;
-		hwif->drives[0].autodma = 1;
-		hwif->drives[1].autodma = 1;
 	}
 
 	/* Reset pulse */
@@ -1018,14 +1015,6 @@ static ide_startstop_t cris_dma_intr (ide_drive_t *drive)
  * the caller should revert to PIO for the current request.
  */
 
-static int cris_dma_check(ide_drive_t *drive)
-{
-	if (ide_tune_dma(drive))
-		return 0;
-
-	return -1;
-}
-
 static int cris_dma_end(ide_drive_t *drive)
 {
 	drive->waiting_for_dma = 0;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index a4cbbbaccde..bc57ce6bf0b 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -338,35 +338,30 @@ static int config_drive_for_dma (ide_drive_t *drive)
 	ide_hwif_t *hwif = drive->hwif;
 	struct hd_driveid *id = drive->id;
 
-	/* consult the list of known "bad" drives */
-	if (__ide_dma_bad_drive(drive))
-		return -1;
-
 	if (drive->media != ide_disk && hwif->atapi_dma == 0)
-		return -1;
+		return 0;
 
-	if ((id->capability & 1) && drive->autodma) {
-		/*
-		 * Enable DMA on any drive that has
-		 * UltraDMA (mode 0/1/2/3/4/5/6) enabled
-		 */
-		if ((id->field_valid & 4) && ((id->dma_ultra >> 8) & 0x7f))
-			return 0;
-		/*
-		 * Enable DMA on any drive that has mode2 DMA
-		 * (multi or single) enabled
-		 */
-		if (id->field_valid & 2)	/* regular DMA */
-			if ((id->dma_mword & 0x404) == 0x404 ||
-			    (id->dma_1word & 0x404) == 0x404)
-				return 0;
-
-		/* Consult the list of known "good" drives */
-		if (ide_dma_good_drive(drive))
-			return 0;
-	}
+	/*
+	 * Enable DMA on any drive that has
+	 * UltraDMA (mode 0/1/2/3/4/5/6) enabled
+	 */
+	if ((id->field_valid & 4) && ((id->dma_ultra >> 8) & 0x7f))
+		return 1;
+
+	/*
+	 * Enable DMA on any drive that has mode2 DMA
+	 * (multi or single) enabled
+	 */
+	if (id->field_valid & 2)	/* regular DMA */
+		if ((id->dma_mword & 0x404) == 0x404 ||
+		    (id->dma_1word & 0x404) == 0x404)
+			return 1;
+
+	/* Consult the list of known "good" drives */
+	if (ide_dma_good_drive(drive))
+		return 1;
 
-	return -1;
+	return 0;
 }
 
 /**
@@ -627,6 +622,8 @@ static int __ide_dma_test_irq(ide_drive_t *drive)
 			drive->name, __FUNCTION__);
 	return 0;
 }
+#else
+static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
 #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
 
 int __ide_dma_bad_drive (ide_drive_t *drive)
@@ -758,17 +755,20 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
 
 EXPORT_SYMBOL_GPL(ide_find_dma_mode);
 
-int ide_tune_dma(ide_drive_t *drive)
+static int ide_tune_dma(ide_drive_t *drive)
 {
 	u8 speed;
 
-	if ((drive->id->capability & 1) == 0 || drive->autodma == 0)
+	if (noautodma || drive->nodma || (drive->id->capability & 1) == 0)
 		return 0;
 
 	/* consult the list of known "bad" drives */
 	if (__ide_dma_bad_drive(drive))
 		return 0;
 
+	if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
+		return config_drive_for_dma(drive);
+
 	speed = ide_max_dma_mode(drive);
 
 	if (!speed)
@@ -783,7 +783,22 @@ int ide_tune_dma(ide_drive_t *drive)
 	return 1;
 }
 
-EXPORT_SYMBOL_GPL(ide_tune_dma);
+static int ide_dma_check(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	int vdma = (hwif->host_flags & IDE_HFLAG_VDMA)? 1 : 0;
+
+	if (!vdma && ide_tune_dma(drive))
+		return 0;
+
+	/* TODO: always do PIO fallback */
+	if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
+		return -1;
+
+	ide_set_max_pio(drive);
+
+	return vdma ? 0 : -1;
+}
 
 void ide_dma_verbose(ide_drive_t *drive)
 {
@@ -842,7 +857,7 @@ int ide_set_dma(ide_drive_t *drive)
 	ide_hwif_t *hwif = drive->hwif;
 	int rc;
 
-	rc = hwif->ide_dma_check(drive);
+	rc = ide_dma_check(drive);
 
 	switch(rc) {
 	case -1: /* DMA needs to be disabled */
@@ -1019,8 +1034,6 @@ void ide_setup_dma (ide_hwif_t *hwif, unsigned long dma_base, unsigned int num_p
 		hwif->ide_dma_on = &__ide_dma_on;
 	if (!hwif->dma_host_on)
 		hwif->dma_host_on = &ide_dma_host_on;
-	if (!hwif->ide_dma_check)
-		hwif->ide_dma_check = &config_drive_for_dma;
 	if (!hwif->dma_setup)
 		hwif->dma_setup = &ide_dma_setup;
 	if (!hwif->dma_exec_cmd)
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 04273d3c147..ec835e37e72 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -219,11 +219,11 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
 
 	case ide_pm_restore_dma:	/* Resume step 3 (restore DMA) */
 		/*
-		 * Right now, all we do is call hwif->ide_dma_check(drive),
+		 * Right now, all we do is call ide_set_dma(drive),
 		 * we could be smarter and check for current xfer_speed
 		 * in struct drive etc...
 		 */
-		if (drive->hwif->ide_dma_check == NULL)
+		if (drive->hwif->ide_dma_on == NULL)
 			break;
 		drive->hwif->dma_off_quietly(drive);
 		/*
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index aa738833bed..d4d790f91f9 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -776,7 +776,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 //		msleep(50);
 
 #ifdef CONFIG_BLK_DEV_IDEDMA
-	if (hwif->ide_dma_check)	 /* check if host supports DMA */
+	if (hwif->ide_dma_on)	/* check if host supports DMA */
 		hwif->dma_host_off(drive);
 #endif
 
@@ -830,7 +830,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 #ifdef CONFIG_BLK_DEV_IDEDMA
 	if (speed >= XFER_SW_DMA_0)
 		hwif->dma_host_on(drive);
-	else if (hwif->ide_dma_check)	/* check if host supports DMA */
+	else if (hwif->ide_dma_on)	/* check if host supports DMA */
 		hwif->dma_off_quietly(drive);
 #endif
 
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 0e2562f0f74..af86433baed 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -96,21 +96,6 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
 	return min(speed, mode);
 }
 
-int ide_use_fast_pio(ide_drive_t *drive)
-{
-	struct hd_driveid *id = drive->id;
-
-	if ((id->capability & 1) && drive->autodma)
-		return 1;
-
-	if ((id->capability & 8) || (id->field_valid & 2))
-		return 1;
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(ide_use_fast_pio);
-
 /*
  * Standard (generic) timings for PIO modes, from ATA2 specification.
  * These timings are for access to the IDE data port register *only*.
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 34b1fb65bc7..3c945d64d84 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -835,16 +835,7 @@ static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
 
 			drive->nice1 = 1;
 
-			/*
-			 * MAJOR HACK BARF :-/
-			 *
-			 * FIXME: chipsets own this cruft!
-			 */
-			/*
-			 * Move here to prevent module loading clashing.
-			 */
-	//		drive->autodma = hwif->autodma;
-			if (hwif->ide_dma_check) {
+			if (hwif->ide_dma_on) {
 				/*
 				 * Force DMAing for the beginning of the check.
 				 * Some chipsets appear to do interesting
@@ -852,10 +843,7 @@ static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
 				 *   PARANOIA!!!
 				 */
 				hwif->dma_off_quietly(drive);
-#ifdef CONFIG_IDEDMA_ONLYDISK
-				if (drive->media == ide_disk)
-#endif
-					ide_set_dma(drive);
+				ide_set_dma(drive);
 			}
 		}
 	}
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 5c0e4078b5c..5b090662683 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -100,8 +100,6 @@ static int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
 
 int noautodma = 0;
 
-EXPORT_SYMBOL(noautodma);
-
 #ifdef CONFIG_BLK_DEV_IDEACPI
 int ide_noacpi = 0;
 int ide_noacpitfs = 1;
@@ -418,7 +416,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 	hwif->dma_exec_cmd		= tmp_hwif->dma_exec_cmd;
 	hwif->dma_start			= tmp_hwif->dma_start;
 	hwif->ide_dma_end		= tmp_hwif->ide_dma_end;
-	hwif->ide_dma_check		= tmp_hwif->ide_dma_check;
 	hwif->ide_dma_on		= tmp_hwif->ide_dma_on;
 	hwif->dma_off_quietly		= tmp_hwif->dma_off_quietly;
 	hwif->ide_dma_test_irq		= tmp_hwif->ide_dma_test_irq;
@@ -461,7 +458,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 	hwif->select_data		= tmp_hwif->select_data;
 	hwif->extra_base		= tmp_hwif->extra_base;
 	hwif->extra_ports		= tmp_hwif->extra_ports;
-	hwif->autodma			= tmp_hwif->autodma;
 
 	hwif->hwif_data			= tmp_hwif->hwif_data;
 }
@@ -823,7 +819,7 @@ int set_using_dma(ide_drive_t *drive, int arg)
 	if (!drive->id || !(drive->id->capability & 1))
 		goto out;
 
-	if (hwif->ide_dma_check == NULL)
+	if (hwif->ide_dma_on == NULL)
 		goto out;
 
 	err = -EBUSY;
@@ -1276,7 +1272,7 @@ static int __init ide_setup(char *s)
 	if (!strcmp(s, "ide=nodma")) {
 		printk(" : Prevented DMA\n");
 		noautodma = 1;
-		return 1;
+		goto obsolete_option;
 	}
 
 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
@@ -1310,7 +1306,7 @@ static int __init ide_setup(char *s)
 	 */
 	if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
 		const char *hd_words[] = {
-			"none", "noprobe", "nowerr", "cdrom", "minus5",
+			"none", "noprobe", "nowerr", "cdrom", "nodma",
 			"autotune", "noautotune", "minus8", "swapdata", "bswap",
 			"noflush", "remap", "remap63", "scsi", NULL };
 		unit = s[2] - 'a';
@@ -1338,6 +1334,9 @@ static int __init ide_setup(char *s)
 				drive->ready_stat = 0;
 				hwif->noprobe = 0;
 				goto done;
+			case -5: /* nodma */
+				drive->nodma = 1;
+				goto done;
 			case -6: /* "autotune" */
 				drive->autotune = IDE_TUNE_AUTO;
 				goto obsolete_option;
@@ -1399,7 +1398,7 @@ static int __init ide_setup(char *s)
 		 */
 		static const char *ide_words[] = {
 			"noprobe", "serialize", "minus3", "minus4",
-			"reset", "dma", "ata66", "minus8", "minus9",
+			"reset", "minus6", "ata66", "minus8", "minus9",
 			"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
 			"dtc2278", "umc8672", "ali14xx", NULL };
 		hw = s[3] - '0';
@@ -1478,6 +1477,7 @@ static int __init ide_setup(char *s)
 			case -10: /* minus10 */
 			case -9: /* minus9 */
 			case -8: /* minus8 */
+			case -6:
 			case -4:
 			case -3:
 				goto bad_option;
@@ -1492,9 +1492,6 @@ static int __init ide_setup(char *s)
 #else
 				goto bad_hwif;
 #endif
-			case -6: /* dma */
-				hwif->autodma = 1;
-				goto obsolete_option;
 			case -5: /* "reset" */
 				hwif->reset = 1;
 				goto obsolete_option;
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 4cdb519f983..e8e360c2619 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -28,7 +28,7 @@
     and other provisions required by the GPL.  If you do not delete
     the provisions above, a recipient may use your version of this
     file under either the MPL or the GPL.
-    
+
 ======================================================================*/
 
 #include <linux/module.h>
@@ -327,13 +327,13 @@ failed:
     After a card is removed, ide_release() will unregister the net
     device, and release the PCMCIA configuration.  If the device is
     still open, this will be postponed until it is closed.
-    
+
 ======================================================================*/
 
 void ide_release(struct pcmcia_device *link)
 {
     ide_info_t *info = link->priv;
-    
+
     DEBUG(0, "ide_release(0x%p)\n", link);
 
     if (info->ndev) {
@@ -353,11 +353,12 @@ void ide_release(struct pcmcia_device *link)
     stuff to run after an event is received.  A CARD_REMOVAL event
     also sets some flags to discourage the ide drivers from
     talking to the ports.
-    
+
 ======================================================================*/
 
 static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_FUNC_ID(4),
+	PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000),	/* Corsair */
 	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
 	PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),	/* I-O Data CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
@@ -366,7 +367,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
- 	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
+	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */
 	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
 	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),	/* Viking CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar, Viking CFA */
@@ -384,6 +385,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 892d08f61dc..47c035a550e 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -351,11 +351,18 @@ static int auide_dma_setup(ide_drive_t *drive)
 	return 0;
 }
 
-static int auide_dma_check(ide_drive_t *drive)
+static u8 auide_mdma_filter(ide_drive_t *drive)
 {
-	u8 speed = ide_max_dma_mode(drive);
+	/*
+	 * FIXME: ->white_list and ->black_list are based on completely bogus
+	 * ->ide_dma_check implementation which didn't set neither the host
+	 * controller timings nor the device for the desired transfer mode.
+	 *
+	 * They should be either removed or 0x00 MWDMA mask should be
+	 * returned for devices on the ->black_list.
+	 */
 
-	if( dbdma_init_done == 0 ){
+	if (dbdma_init_done == 0) {
 		auide_hwif.white_list = ide_in_drive_list(drive->id,
 							  dma_white_list);
 		auide_hwif.black_list = ide_in_drive_list(drive->id,
@@ -366,22 +373,11 @@ static int auide_dma_check(ide_drive_t *drive)
 	}
 
 	/* Is the drive in our DMA black list? */
-
-	if ( auide_hwif.black_list ) {
-		drive->using_dma = 0;
-
-		/* Borrowed the warning message from ide-dma.c */
-
+	if (auide_hwif.black_list)
 		printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
-		       drive->name, drive->id->model);	       
-	}
-	else
-		drive->using_dma = 1;
-
-	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
-		return 0;
+				    drive->name, drive->id->model);
 
-	return -1;
+	return drive->hwif->mwdma_mask;
 }
 
 static int auide_dma_test_irq(ide_drive_t *drive)
@@ -692,7 +688,8 @@ static int au_ide_probe(struct device *dev)
 	hwif->dma_off_quietly		= &auide_dma_off_quietly;
 	hwif->dma_timeout		= &auide_dma_timeout;
 
-	hwif->ide_dma_check             = &auide_dma_check;
+	hwif->mdma_filter		= &auide_mdma_filter;
+
 	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
 	hwif->dma_start                 = &auide_dma_start;
 	hwif->ide_dma_end               = &auide_dma_end;
@@ -703,19 +700,14 @@ static int au_ide_probe(struct device *dev)
 	hwif->dma_lost_irq		= &auide_dma_lost_irq;
 	hwif->ide_dma_on                = &auide_dma_on;
 
-	hwif->autodma                   = 1;
-	hwif->drives[0].autodma         = hwif->autodma;
-	hwif->drives[1].autodma         = hwif->autodma;
 	hwif->atapi_dma                 = 1;
 
 #else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
-	hwif->autodma                   = 0;
 	hwif->channel                   = 0;
 	hwif->hold                      = 1;
 	hwif->select_data               = 0;    /* no chipset-specific code */
 	hwif->config_data               = 0;    /* no chipset-specific code */
 
-	hwif->drives[0].autodma         = 0;
 	hwif->drives[0].autotune        = 1;    /* 1=autotune, 2=noautotune, 0=default */
 #endif
 	hwif->drives[0].no_io_32bit     = 1;   
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index d6cb2d5143c..3a4c2c26a77 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/aec62xx.c		Version 0.24	May 24, 2007
+ * linux/drivers/ide/pci/aec62xx.c		Version 0.25	Aug 1, 2007
  *
  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
@@ -141,17 +141,6 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0);
 }
 
-static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
-{
-	if (ide_tune_dma(drive))
-		return 0;
-
-	if (ide_use_fast_pio(drive))
-		ide_set_max_pio(drive);
-
-	return -1;
-}
-
 static void aec62xx_dma_lost_irq (ide_drive_t *drive)
 {
 	switch (HWIF(drive)->pci_dev->device) {
@@ -207,15 +196,14 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 	} else
 		hwif->set_dma_mode = &aec6260_set_mode;
 
-	if (!hw