V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friends

Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg
and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr.

This simplifies this API substantially.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

23 files changed, 126 insertions, 269 deletions

diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index ba4706afc5f..e395a9cdc53 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -370,19 +370,20 @@ from the remove() callback ensures that this is always done correctly.
 The bridge driver also has some helper functions it can use:
 
 struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter,
-	       "module_foo", "chipid", 0x36);
+	       "module_foo", "chipid", 0x36, NULL);
 
 This loads the given module (can be NULL if no module needs to be loaded) and
 calls i2c_new_device() with the given i2c_adapter and chip/address arguments.
 If all goes well, then it registers the subdev with the v4l2_device.
 
-You can also use v4l2_i2c_new_probed_subdev() which is very similar to
-v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses
-that it should probe. Internally it calls i2c_new_probed_device().
+You can also use the last argument of v4l2_i2c_new_subdev() to pass an array
+of possible I2C addresses that it should probe. These probe addresses are
+only used if the previous argument is 0. A non-zero argument means that you
+know the exact i2c address so in that case no probing will take place.
 
 Both functions return NULL if something went wrong.
 
-Note that the chipid you pass to v4l2_i2c_new_(probed_)subdev() is usually
+Note that the chipid you pass to v4l2_i2c_new_subdev() is usually
 the same as the module name. It allows you to specify a chip variant, e.g.
 "saa7114" or "saa7115". In general though the i2c driver autodetects this.
 The use of chipid is something that needs to be looked at more closely at a
@@ -410,11 +411,6 @@ the irq and platform_data arguments after the subdev was setup. The older
 v4l2_i2c_new_(probed_)subdev functions will call s_config as well, but with
 irq set to 0 and platform_data set to NULL.
 
-Note that in the next kernel release the functions v4l2_i2c_new_subdev,
-v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr will all be
-replaced by a single v4l2_i2c_new_subdev that is identical to
-v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments.
-
 struct video_device
 -------------------
 
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 830c4a933f6..57dd9195daf 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -212,7 +212,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 		   be abstracted out if we ever need to support a different
 		   demod) */
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"au8522", "au8522", 0x8e >> 1);
+				"au8522", "au8522", 0x8e >> 1, NULL);
 		if (sd == NULL)
 			printk(KERN_ERR "analog subdev registration failed\n");
 	}
@@ -221,7 +221,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		/* Load the tuner module, which does the attach */
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"tuner", "tuner", dev->board.tuner_addr);
+				"tuner", "tuner", dev->board.tuner_addr, NULL);
 		if (sd == NULL)
 			printk(KERN_ERR "tuner subdev registration fail\n");
 
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index b42251fa96b..12279f6d9bc 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3524,8 +3524,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		};
 		struct v4l2_subdev *sd;
 
-		sd = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, "saa6588", "saa6588", addrs);
+		sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+			&btv->c.i2c_adap, "saa6588", "saa6588", 0, addrs);
 		btv->has_saa6588 = (sd != NULL);
 	}
 
@@ -3549,8 +3549,8 @@ void __devinit bttv_init_card2(struct bttv *btv)
 			I2C_CLIENT_END
 		};
 
-		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, "msp3400", "msp3400", addrs);
+		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+			&btv->c.i2c_adap, "msp3400", "msp3400", 0, addrs);
 		if (btv->sd_msp34xx)
 			return;
 		goto no_audio;
@@ -3563,16 +3563,16 @@ void __devinit bttv_init_card2(struct bttv *btv)
 			I2C_CLIENT_END
 		};
 
-		if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
 			return;
 		goto no_audio;
 	}
 
 	case 3: {
 		/* The user specified that we should probe for tvaudio */
-		btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+		btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+			&btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
 		if (btv->sd_tvaudio)
 			return;
 		goto no_audio;
@@ -3591,13 +3591,13 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	   it really is a msp3400, so it will return NULL when the device
 	   found is really something else (e.g. a tea6300). */
 	if (!bttv_tvcards[btv->c.type].no_msp34xx) {
-		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 			&btv->c.i2c_adap, "msp3400", "msp3400",
-			I2C_ADDR_MSP3400 >> 1);
+			0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
 	} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
-		btv->sd_msp34xx = v4l2_i2c_new_probed_subdev_addr(&btv->c.v4l2_dev,
+		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 			&btv->c.i2c_adap, "msp3400", "msp3400",
-			I2C_ADDR_MSP3400_ALT >> 1);
+			0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
 	}
 
 	/* If we found a msp34xx, then we're done. */
@@ -3611,14 +3611,14 @@ void __devinit bttv_init_card2(struct bttv *btv)
 			I2C_CLIENT_END
 		};
 
-		if (v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tda7432", "tda7432", addrs))
+		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
 			return;
 	}
 
 	/* Now see if we can find one of the tvaudio devices. */
-	btv->sd_tvaudio = v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-		&btv->c.i2c_adap, "tvaudio", "tvaudio", tvaudio_addrs());
+	btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
+		&btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
 	if (btv->sd_tvaudio)
 		return;
 
@@ -3641,15 +3641,15 @@ void __devinit bttv_init_tuner(struct bttv *btv)
 
 		/* Load tuner module before issuing tuner config call! */
 		if (bttv_tvcards[btv->c.type].has_radio)
-			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+			v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
 				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
 
 		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
 		tun_setup.type = btv->tuner_type;
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 9c149a78129..657c481d255 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1955,7 +1955,7 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 
 	cam->sensor_addr = 0x42;
 	cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter,
-			"ov7670", "ov7670", cam->sensor_addr);
+			"ov7670", "ov7670", cam->sensor_addr, NULL);
 	if (cam->sensor == NULL) {
 		ret = -ENODEV;
 		goto out_smbus;
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index dbbf93d2eee..2477461e84d 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -139,16 +139,16 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx)
 
 	if (hw == CX18_HW_TUNER) {
 		/* special tuner group handling */
-		sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
-				adap, mod, type, cx->card_i2c->radio);
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, mod, type, 0, cx->card_i2c->radio);
 		if (sd != NULL)
 			sd->grp_id = hw;
-		sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
-				adap, mod, type, cx->card_i2c->demod);
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, mod, type, 0, cx->card_i2c->demod);
 		if (sd != NULL)
 			sd->grp_id = hw;
-		sd = v4l2_i2c_new_probed_subdev(&cx->v4l2_dev,
-				adap, mod, type, cx->card_i2c->tv);
+		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
+				adap, mod, type, 0, cx->card_i2c->tv);
 		if (sd != NULL)
 			sd->grp_id = hw;
 		return sd != NULL ? 0 : -1;
@@ -162,7 +162,7 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx)
 		return -1;
 
 	/* It's an I2C device other than an analog tuner or IR chip */
-	sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx]);
+	sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, mod, type, hw_addrs[idx], NULL);
 	if (sd != NULL)
 		sd->grp_id = hw;
 	return sd != NULL ? 0 : -1;
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 63d2239fd32..319c459459e 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -313,7 +313,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
 	if (dev->board.decoder == CX231XX_AVDECODER) {
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 					&dev->i2c_bus[0].i2c_adap,
-					"cx25840", "cx25840", 0x88 >> 1);
+					"cx25840", "cx25840", 0x88 >> 1, NULL);
 		if (dev->sd_cx25840 == NULL)
 			cx231xx_info("cx25840 subdev registration failure\n");
 		cx25840_call(dev, core, load_fw);
@@ -323,7 +323,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		dev->sd_tuner =	v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[1].i2c_adap,
-				"tuner", "tuner", 0xc2 >> 1);
+				"tuner", "tuner", 0xc2 >> 1, NULL);
 		if (dev->sd_tuner == NULL)
 			cx231xx_info("tuner subdev registration failure\n");
 
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 3143d85ef31..02ba4aec7d9 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -929,7 +929,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
-				"cx25840", "cx25840", 0x88 >> 1);
+				"cx25840", "cx25840", 0x88 >> 1, NULL);
 		v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
 		break;
 	}
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 5d609333630..654cc253cd5 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1521,11 +1521,11 @@ int cx23885_video_register(struct cx23885_dev *dev)
 		if (dev->tuner_addr)
 			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[1].i2c_adap,
-				"tuner", "tuner", dev->tuner_addr);
+				"tuner", "tuner", dev->tuner_addr, NULL);
 		else
-			sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[1].i2c_adap,
-				"tuner", "tuner", v4l2_i2c_tuner_addrs(ADDRS_TV));
+				"tuner", "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
 		if (sd) {
 			struct tuner_setup tun_setup;
 
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index e5f07fbd5a3..33be6369871 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -3439,20 +3439,20 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 		   The radio_type is sometimes missing, or set to UNSET but
 		   later code configures a tea5767.
 		 */
-		v4l2_i2c_new_probed_subdev(&core->v4l2_dev, &core->i2c_adap,
+		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
 				"tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
 		if (has_demod)
-			v4l2_i2c_new_probed_subdev(&core->v4l2_dev,
+			v4l2_i2c_new_subdev(&core->v4l2_dev,
 				&core->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (core->board.tuner_addr == ADDR_UNSET) {
-			v4l2_i2c_new_probed_subdev(&core->v4l2_dev,
+			v4l2_i2c_new_subdev(&core->v4l2_dev,
 				&core->i2c_adap, "tuner", "tuner",
-				has_demod ? tv_addrs + 4 : tv_addrs);
+				0, has_demod ? tv_addrs + 4 : tv_addrs);
 		} else {
 			v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
-				"tuner", "tuner", core->board.tuner_addr);
+				"tuner", "tuner", core->board.tuner_addr, NULL);
 		}
 	}
 
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 2bb54c3ef5c..81d2b5dea18 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -1881,14 +1881,14 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 
 	if (core->board.audio_chip == V4L2_IDENT_WM8775)
 		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
-				"wm8775", "wm8775", 0x36 >> 1);
+				"wm8775", "wm8775", 0x36 >> 1, NULL);
 
 	if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
 		/* This probes for a tda9874 as is used on some
 		   Pixelview Ultra boards. */
-		v4l2_i2c_new_probed_subdev_addr(&core->v4l2_dev,
+		v4l2_i2c_new_subdev(&core->v4l2_dev,
 				&core->i2c_adap,
-				"tvaudio", "tvaudio", 0xb0 >> 1);
+				"tvaudio", "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
 	}
 
 	switch (core->boardnr) {
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index 8ea65d794db..a125a452d24 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -1566,10 +1566,10 @@ static __init int vpif_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < subdev_count; i++) {
-		vpif_obj.sd[i] = v4l2_i2c_new_probed_subdev(&vpif_obj.v4l2_dev,
+		vpif_obj.sd[i] = v4l2_i2c_new_subdev(&vpif_obj.v4l2_dev,
 						i2c_adap, subdevdata[i].name,
 						subdevdata[i].name,
-						&subdevdata[i].addr);
+						0, I2C_ADDRS(subdevdata[i].addr));
 		if (!vpif_obj.sd[i]) {
 			vpif_err("Error registering v4l2 subdevice\n");
 			goto probe_subdev_out;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 8a5ce818170..bdb249bd9d5 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -2372,55 +2372,55 @@ void em28xx_card_setup(struct em28xx *dev)
 
 	/* request some modules */
 	if (dev->board.has_msp34xx)
-		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"msp3400", "msp3400", msp3400_addrs);
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"msp3400", "msp3400", 0, msp3400_addrs);
 
 	if (dev->board.decoder == EM28XX_SAA711X)
-		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"saa7115", "saa7115_auto", saa711x_addrs);
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"saa7115", "saa7115_auto", 0, saa711x_addrs);
 
 	if (dev->board.decoder == EM28XX_TVP5150)
-		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"tvp5150", "tvp5150", tvp5150_addrs);
+		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+			"tvp5150", "tvp5150", 0, tvp5150_addrs);
 
 	if (dev->em28xx_sensor == EM28XX_MT9V011) {
 		struct v4l2_subdev *sd;
 
-		sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
-			 &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+			 &dev->i2c_adap, "mt9v011", "mt9v011", 0, mt9v011_addrs);
 		v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
 	}
 
 
 	if (dev->board.adecoder == EM28XX_TVAUDIO)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"tvaudio", "tvaudio", dev->board.tvaudio_addr);
+			"tvaudio", "tvaudio", dev->board.tvaudio_addr, NULL);
 
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
 
 		if (dev->board.radio.type)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"tuner", "tuner", dev->board.radio_addr);
+				"tuner", "tuner", dev->board.radio_addr, NULL);
 
 		if (has_demod)
-			v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (dev->tuner_addr == 0) {
 			enum v4l2_i2c_tuner_type type =
 				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 			struct v4l2_subdev *sd;
 
-			sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(type));
+				0, v4l2_i2c_tuner_addrs(type));
 
 			if (sd)
 				dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
 		} else {
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				"tuner", "tuner", dev->tuner_addr);
+				"tuner", "tuner", dev->tuner_addr, NULL);
 		}
 	}
 
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 8f15a31d3f6..b9c71e61f7d 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -161,19 +161,19 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 		return -1;
 	if (hw == IVTV_HW_TUNER) {
 		/* special tuner handling */
-		sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type,
-				itv->card_i2c->radio);
+				0, itv->card_i2c->radio);
 		if (sd)
 			sd->grp_id = 1 << idx;
-		sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type,
-				itv->card_i2c->demod);
+				0, itv->card_i2c->demod);
 		if (sd)
 			sd->grp_id = 1 << idx;
-		sd = v4l2_i2c_new_probed_subdev(&itv->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
 				adap, mod, type,
-				itv->card_i2c->tv);
+				0, itv->card_i2c->tv);
 		if (sd)
 			sd->grp_id = 1 << idx;
 		return sd ? 0 : -1;
@@ -181,11 +181,11 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 	if (!hw_addrs[idx])
 		return -1;
 	if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
-		sd = v4l2_i2c_new_probed_subdev_addr(&itv->v4l2_dev,
-				adap, mod, type, hw_addrs[idx]);
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
+				adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx]));
 	} else {
 		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
-				adap, mod, type, hw_addrs[idx]);
+				adap, mod, type, hw_addrs[idx], NULL);
 	}
 	if (sd)
 		sd->grp_id = 1 << idx;
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 35890e8b243..3454070e63f 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -186,19 +186,19 @@ static int mxb_probe(struct saa7146_dev *dev)
 	}
 
 	mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"saa7115", "saa7111", I2C_SAA7111A);
+			"saa7115", "saa7111", I2C_SAA7111A, NULL);
 	mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6420", "tea6420", I2C_TEA6420_1);
+			"tea6420", "tea6420", I2C_TEA6420_1, NULL);
 	mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6420", "tea6420", I2C_TEA6420_2);
+			"tea6420", "tea6420", I2C_TEA6420_2, NULL);
 	mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tea6415c", "tea6415c", I2C_TEA6415C);
+			"tea6415c", "tea6415c", I2C_TEA6415C, NULL);
 	mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tda9840", "tda9840", I2C_TDA9840);
+			"tda9840", "tda9840", I2C_TDA9840, NULL);
 	mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"tuner", "tuner", I2C_TUNER);
+			"tuner", "tuner", I2C_TUNER, NULL);
 	if (v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			"saa5246a", "saa5246a", I2C_SAA5246A)) {
+			"saa5246a", "saa5246a", I2C_SAA5246A, NULL)) {
 		printk(KERN_INFO "mxb: found teletext decoder\n");
 	}
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index cbc388729d7..13639b30270 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2063,8 +2063,8 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 		return -EINVAL;
 	}
 
-	/* Note how the 2nd and 3rd arguments are the same for both
-	 * v4l2_i2c_new_subdev() and v4l2_i2c_new_probed_subdev().  Why?
+	/* Note how the 2nd and 3rd arguments are the same for
+	 * v4l2_i2c_new_subdev().  Why?
 	 * Well the 2nd argument is the module name to load, while the 3rd
 	 * argument is documented in the framework as being the "chipid" -
 	 * and every other place where I can find examples of this, the
@@ -2077,15 +2077,15 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 			   mid, i2caddr[0]);
 		sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
 					 fname, fname,
-					 i2caddr[0]);
+					 i2caddr[0], NULL);
 	} else {
 		pvr2_trace(PVR2_TRACE_INIT,
 			   "Module ID %u:"
 			   " Setting up with address probe list",
 			   mid);
-		sd = v4l2_i2c_new_probed_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
+		sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
 						fname, fname,
-						i2caddr);
+						0, i2caddr);
 	}
 
 	if (!sd) {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 1b29487fd25..14b9ba4579b 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -7208,22 +7208,22 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		if (dev->radio_type != UNSET)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				dev->radio_addr);
+				dev->radio_addr, NULL);
 		if (has_demod)
-			v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (dev->tuner_addr == ADDR_UNSET) {
 			enum v4l2_i2c_tuner_type type =
 				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 
-			v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(type));
+				0, v4l2_i2c_tuner_addrs(type));
 		} else {
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap, "tuner", "tuner",
-				dev->tuner_addr);
+				dev->tuner_addr, NULL);
 		}
 	}
 
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index cb78c956d81..f87757fccc7 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -1000,7 +1000,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		struct v4l2_subdev *sd =
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 				"saa6752hs", "saa6752hs",
-				saa7134_boards[dev->board].empress_addr);
+				saa7134_boards[dev->board].empress_addr, NULL);
 
 		if (sd)
 			sd->grp_id = GRP_EMPRESS;
@@ -1009,9 +1009,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (saa7134_boards[dev->board].rds_addr) {
 		struct v4l2_subdev *sd;
 
-		sd = v4l2_i2c_new_probed_subdev_addr(&dev->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_adap,	"saa6588", "saa6588",
-				saa7134_boards[dev->board].rds_addr);
+				0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
 		if (sd) {
 			printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
 			dev->has_rds = 1;
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index 1fe5befbbf8..f97fd06d594 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -246,9 +246,9 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 	switch (usbvision_device_data[usbvision->DevModel].Codec) {
 	case CODEC_SAA7113:
 	case CODEC_SAA7111:
-		v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+		v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
 				&usbvision->i2c_adap, "saa7115",
-				"saa7115_auto", saa711x_addrs);
+				"saa7115_auto", 0, saa711x_addrs);
 		break;
 	}
 	if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
@@ -256,16 +256,16 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 		enum v4l2_i2c_tuner_type type;
 		struct tuner_setup tun_setup;
 
-		sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
 				&usbvision->i2c_adap, "tuner",
-				"tuner", v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+				"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		/* depending on whether we found a demod or not, select
 		   the tuner type. */
 		type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 
-		sd = v4l2_i2c_new_probed_subdev(&usbvision->v4l2_dev,
+		sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
 				&usbvision->i2c_adap, "tuner",
-				"tuner", v4l2_i2c_tuner_addrs(type));
+				"tuner", 0, v4l2_i2c_tuner_addrs(type));
 
 		if (usbvision->tuner_type != -1) {
 			tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 3a0c64935b0..f5a93ae3cdf 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -814,139 +814,6 @@ EXPORT_SYMBOL_GPL(v4l2_i2c_subdev_init);
 
 
 /* Load an i2c sub-device. */
-struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type, u8 addr)
-{
-	struct v4l2_subdev *sd = NULL;
-	struct i2c_client *client;
-	struct i2c_board_info info;
-
-	BUG_ON(!v4l2_dev);
-
-	if (module_name)
-		request_module(module_name);
-
-	/* Setup the i2c board info with the device type and
-	   the device address. */
-	memset(&info, 0, sizeof(info));
-	strlcpy(info.type, client_type, sizeof(info.type));
-	info.addr = addr;
-
-	/* Create the i2c client */
-	client = i2c_new_device(adapter, &info);
-	/* Note: it is possible in the future that
-	   c->driver is NULL if the driver is still being loaded.
-	   We need better support from the kernel so that we
-	   can easily wait for the load to finish. */
-	if (client == NULL || client->driver == NULL)
-		goto error;
-
-	/* Lock the module so we can safely get the v4l2_subdev pointer */
-	if (!try_module_get(client->driver->driver.owner))
-		goto error;
-	sd = i2c_get_clientdata(client);
-
-	/* Register with the v4l2_device which increases the module's
-	   use count as well. */
-	if (v4l2_device_register_subdev(v4l2_dev, sd))
-		sd = NULL;
-	/* Decrease the module use count to match the first try_module_get. */
-	module_put(client->driver->driver.owner);
-
-	if (sd) {
-		/* We return errors from v4l2_subdev_call only if we have the
-		   callback as the .s_config is not mandatory */
-		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
-
-		if (err && err != -ENOIOCTLCMD) {
-			v4l2_device_unregister_subdev(sd);
-			sd = NULL;
-		}
-	}
-
-error:
-	/* If we have a client but no subdev, then something went wrong and
-	   we must unregister the client. */
-	if (client && sd == NULL)
-		i2c_unregister_device(client);
-	return sd;
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev);
-
-/* Probe and load an i2c sub-device. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
-	struct i2c_adapter *adapter,
-	const char *module_name, const char *client_type,
-	const unsigned short *addrs)
-{
-	struct v4l2_subdev *sd = NULL;
-	struct i2c_client *client = NULL;
-	struct i2c_board_info info;
-
-	BUG_ON(!v4l2_dev);
-
-	if (module_name)
-		request_module(module_name);
-
-	/* Setup the i2c board info with the device type and
-	   the device address. */
-	memset(&info, 0, sizeof(info));
-	strlcpy(info.type, client_type, sizeof(info.type));
-
-	/* Probe and create the i2c client */
-	client = i2c_new_probed_device(adapter, &info, addrs);
-	/* Note: it is possible in the future that
-	   c->driver is NULL if the driver is still being loaded.
-	   We need better support from the kernel so that we
-	   can easily wait for the load to finish. */
-	if (client == NULL || client->driver == NULL)
-		goto error;
-
-	/* Lock the module so we can safely get the v4l2_subdev pointer */
-	if (!try_module_get(client->driver->driver.owner))
-		goto error;
-	sd = i2c_get_clientdata(client);
-
-	/* Register with the v4l2_device which increases the module's
-	   use count as well. */
-	if (v4l2_device_register_subdev(v4l2_dev, sd))
-		sd = NULL;
-	/* Decrease the module use count to match the first try_module_get. */
-	module_put(client->driver->driver.owner);
-
-	if (sd) {
-		/* We return errors from v4l2_subdev_call only if we have the
-		   callback as the .s_config is not mandatory */
-		int err = v4l2_subdev_call(sd, core, s_config, 0, NULL);
-
-		if (err && err != -ENOIOCTLCMD) {
-			v4l2_device_unregister_subdev(sd);
-			sd = NULL;
-		}
-	}
-
-error:
-	/* If we have a client but no subdev, then something went wrong and
-	   we must unregister the client. */
-	if (client && sd == NULL)
-		i2c_unregister_device(client);
-	return sd;
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev);
-
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type, u8 addr)
-{
-	unsigned short addrs[2] = { addr, I2C_CLIENT_END };
-
-	return v4l2_i2c_new_probed_subdev(v4l2_dev, adapter,
-			module_name, client_type, addrs);
-}
-EXPORT_SYMBOL_GPL(v4l2_i2c_new_probed_subdev_addr);
-
-/* Load an i2c sub-device. */
 struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
 		struct i2c_adapter *adapter, const char *module_name,
 		struct i2c_board_info *info, const unsigned short *probe_addrs)
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index f3b6e15d91f..cd6a3446ab7 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -4333,11 +4333,11 @@ static int __init vino_module_init(void)
 	vino_init_stage++;
 
 	vino_drvdata->decoder =
-		v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev,
-			&vino_i2c_adapter, "saa7191", "saa7191", 0x45);
+		v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
+			       "saa7191", "saa7191", 0, I2C_ADDRS(0x45));
 	vino_drvdata->camera =
-		v4l2_i2c_new_probed_subdev_addr(&vino_drvdata->v4l2_dev,
-			&vino_i2c_adapter, "indycam", "indycam", 0x2b);
+		v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
+			       "indycam", "indycam", 0, I2C_ADDRS(0x2b));
 
 	dprintk("init complete!\n");
 
diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c
index 602484dd3da..37fcdc447db 100644
--- a/drivers/media/video/w9968cf.c
+++ b/drivers/media/video/w9968cf.c
@@ -3515,9 +3515,9 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	w9968cf_turn_on_led(cam);
 
 	w9968cf_i2c_init(cam);
-	cam->sensor_sd = v4l2_i2c_new_probed_subdev(&cam->v4l2_dev,
+	cam->sensor_sd = v4l2_i2c_new_subdev(&cam->v4l2_dev,
 			&cam->i2c_adapter,
-			"ovcamchip", "ovcamchip", addrs);
+			"ovcamchip", "ovcamchip", 0, addrs);
 
 	usb_set_intfdata(intf, cam);
 	mutex_unlock(&cam->dev_mutex);
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 0c4d9b1f8e6..be70574870d 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -1357,15 +1357,15 @@ static int __devinit zoran_probe(struct pci_dev *pdev,
 		goto zr_free_irq;
 	}
 
-	zr->decoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev,
+	zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
 		&zr->i2c_adapter, zr->card.mod_decoder, zr->card.i2c_decoder,
-		zr->card.addrs_decoder);
+		0, zr->card.addrs_decoder);
 
 	if (zr->card.mod_encoder)
-		zr->encoder = v4l2_i2c_new_probed_subdev(&zr->v4l2_dev,
+		zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
 			&zr->i2c_adapter,
 			zr->card.mod_encoder, zr->card.i2c_encoder,
-			zr->card.addrs_encoder);
+			0, zr->card.addrs_encoder);
 
 	dprintk(2,
 		KERN_INFO "%s: Initializing videocodec bus...\n",
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 33a18426ab9..1c25b10da34 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -139,29 +139,23 @@ struct v4l2_subdev_ops;
 /* Load an i2c module and return an initialized v4l2_subdev struct.
    Only call request_module if module_name != NULL.
    The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type, u8 addr);
-/* Probe and load an i2c module and return an initialized v4l2_subdev struct.
-   Only call request_module if module_name != NULL.
-   The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev(struct v4l2_device *v4l2_dev,
+struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
 		struct i2c_adapter *adapter,
 		const char *module_name, const char *client_type,
-		const unsigned short *addrs);
-/* Like v4l2_i2c_new_probed_subdev, except probe for a single address. */
-struct v4l2_subdev *v4l2_i2c_new_probed_subdev_addr(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type, u8 addr);
+		int irq, void *platform_data,
+		u8 addr, const unsigned short *probe_addrs);
 
 /* Load an i2c module and return an initialized v4l2_subdev struct.
    Only call request_module if module_name != NULL.
    The client_type argument is the name of the chip that's on the adapter. */
-struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
+static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
 		struct i2c_adapter *adapter,
 		const char *module_name, const char *client_type,
-		int irq, void *platform_data,
-		u8 addr, const unsigned short *probe_addrs);
+		u8 addr, const unsigned short *probe_addrs)
+{
+	return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name,
+				client_type, 0, NULL, addr, probe_addrs);
+}
 
 struct i2c_board_info;