diff options
| author | Russell King <rmk+kernel@arm.linux.org.uk> | 2010-12-22 17:13:05 +0000 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2011-01-05 16:58:45 +0000 |
| commit | ffca2b114c6a804d1307781df687e877a373a1c2 (patch) | |
| tree | 976cffca5c682bcec045ab9f52456854474930a3 | |
| parent | c19f12b5ef3adf3c139eabbe3d3d0201838b77b1 (diff) | |
ARM: PL011: Separate hardware FIFO size from TTY FIFO size
With DMA support, we need to tell the TTY subsystem that the DMA buffer
is the size of the FIFO, otherwise things like tty_wait_until_sent()
will time out too early. Keep (and use) the hardware value separately
from the port->fifosize.
This was part of a larger patch from Linus Walleij, with a little
modification.
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| -rw-r--r-- | drivers/serial/amba-pl011.c | 8 |
1 files changed, 5 insertions, 3 deletions
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 6afdd9b3972..f9b6b8213e7 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -97,6 +97,7 @@ struct uart_amba_port { const struct vendor_data *vendor; unsigned int im; /* interrupt mask */ unsigned int old_status; + unsigned int fifosize; /* vendor-specific */ unsigned int lcrh_tx; /* vendor-specific */ unsigned int lcrh_rx; /* vendor-specific */ bool autorts; @@ -203,7 +204,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap) return; } - count = uap->port.fifosize >> 1; + count = uap->fifosize >> 1; do { writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -541,7 +542,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, if (!(termios->c_cflag & PARODD)) lcr_h |= UART01x_LCRH_EPS; } - if (port->fifosize > 1) + if (uap->fifosize > 1) lcr_h |= UART01x_LCRH_FEN; spin_lock_irqsave(&port->lock, flags); @@ -871,12 +872,13 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id) uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; + uap->fifosize = vendor->fifosize; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; uap->port.iotype = UPIO_MEM; uap->port.irq = dev->irq[0]; - uap->port.fifosize = vendor->fifosize; + uap->port.fifosize = uap->fifosize; uap->port.ops = &amba_pl011_pops; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = i; |