Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull device tree conversions for arm-soc, part 1, from Olof Johansson:
 "The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game
  of booting using device trees, which is a great step forward for them.
  at91 and spear have pretty much completed this process with a huge
  amount of work being put into at91.  The other platforms are
  continuing the process.

  We finally start to see the payback on this investment, as new
  machines are getting supported purely by adding a .dts source file
  that can be completely independent of the kernel source."

Fix up trivial conflict in arch/arm/Kconfig

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files
  arm/dts: omap4-panda: Add LEDs support
  arm/dts: omap4-sdp: Add LEDs support
  arm/dts: twl4030: Add twl4030-gpio node
  OMAP4: devices: Do not create mcpdm device if the dtb has been provided
  OMAP4: devices: Do not create dmic device if the dtb has been provided
  Documentation: update docs for mmp dt
  ARM: dts: refresh dts file for arch mmp
  ARM: mmp: support pxa910 with device tree
  ARM: mmp: support mmp2 with device tree
  gpio: pxa: parse gpio from DTS file
  ARM: mmp: support DT in timer
  ARM: mmp: support DT in irq
  ARM: mmp: append CONFIG_MACH_MMP2_DT
  ARM: mmp: fix build issue on mmp with device tree
  ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree
  ARM: ux500: Disable SMSC911x platform code registration when DT is enabled
  ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement
  ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball
  ARM: SPEAr3xx: Correct keyboard data passed from DT
  ...

138 files changed, 7736 insertions, 2906 deletions

diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 253a35c6f78..28a9af953b9 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -17,14 +17,14 @@ Introduction
   SPEAr (Platform)
 	- SPEAr3XX (3XX SOC series, based on ARM9)
 		- SPEAr300 (SOC)
-			- SPEAr300_EVB (Evaluation Board)
+			- SPEAr300 Evaluation Board
 		- SPEAr310 (SOC)
-			- SPEAr310_EVB (Evaluation Board)
+			- SPEAr310 Evaluation Board
 		- SPEAr320 (SOC)
-			- SPEAr320_EVB (Evaluation Board)
+			- SPEAr320 Evaluation Board
 	- SPEAr6XX (6XX SOC series, based on ARM9)
 		- SPEAr600 (SOC)
-			- SPEAr600_EVB (Evaluation Board)
+			- SPEAr600 Evaluation Board
 	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
 		- SPEAr1300 (SOC)
 
@@ -51,10 +51,11 @@ Introduction
   Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
   spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
   specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
-  mach-spear* also contains board specific files for each machine type.
+  mach-spear* doesn't contains board specific files as they fully support
+  Flattened Device Tree.
 
 
   Document Author
   ---------------
 
-  Viresh Kumar, (c) 2010 ST Microelectronics
+  Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt
new file mode 100644
index 00000000000..539adca19e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt
@@ -0,0 +1,38 @@
+* NXP LPC32xx Main Interrupt Controller
+  (MIC, including SIC1 and SIC2 secondary controllers)
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-mic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-parent: Empty for the interrupt controller itself
+- #interrupt-cells: The number of cells to define the interrupts. Should be 2.
+  The first cell is the IRQ number
+  The second cell is used to specify mode:
+      1 = low-to-high edge triggered
+      2 = high-to-low edge triggered
+      4 = active high level-sensitive
+      8 = active low level-sensitive
+      Default for internal sources should be set to 4 (active high).
+- reg: Should contain MIC registers location and length
+
+Examples:
+	/*
+	 * MIC
+	 */
+	mic: interrupt-controller@40008000 {
+		compatible = "nxp,lpc3220-mic";
+		interrupt-controller;
+		interrupt-parent;
+		#interrupt-cells = <2>;
+		reg = <0x40008000 0xC000>;
+	};
+
+	/*
+	 * ADC
+	 */
+	adc@40048000 {
+		compatible = "nxp,lpc3220-adc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <39 4>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/lpc32xx.txt b/Documentation/devicetree/bindings/arm/lpc32xx.txt
new file mode 100644
index 00000000000..56ec8ddc4a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/lpc32xx.txt
@@ -0,0 +1,8 @@
+NXP LPC32xx Platforms Device Tree Bindings
+------------------------------------------
+
+Boards with the NXP LPC32xx SoC shall have the following properties:
+
+Required root node property:
+
+compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250"
diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
new file mode 100644
index 00000000000..80b9a94d9a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
@@ -0,0 +1,40 @@
+* Marvell MMP Interrupt controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
+  "mrvl,mmp2-mux-intc"
+- reg : Address and length of the register set of the interrupt controller.
+  If the interrupt controller is intc, address and length means the range
+  of the whold interrupt controller. If the interrupt controller is mux-intc,
+  address and length means one register. Since address of mux-intc is in the
+  range of intc. mux-intc is secondary interrupt controller.
+- reg-names : Name of the register set of the interrupt controller. It's
+  only required in mux-intc interrupt controller.
+- interrupts : Should be the port interrupt shared by mux interrupts. It's
+  only required in mux-intc interrupt controller.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source.
+- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
+  controller.
+- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
+  detection first.
+
+Example:
+	intc: interrupt-controller@d4282000 {
+		compatible = "mrvl,mmp2-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xd4282000 0x1000>;
+		mrvl,intc-nr-irqs = <64>;
+	};
+
+	intcmux4@d4282150 {
+		compatible = "mrvl,mmp2-mux-intc";
+		interrupts = <4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x150 0x4>, <0x168 0x4>;
+		reg-names = "mux status", "mux mask";
+		mrvl,intc-nr-irqs = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
index d8de933e9d8..117d741a2e4 100644
--- a/Documentation/devicetree/bindings/arm/mrvl.txt
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
@@ -4,3 +4,11 @@ Marvell Platforms Device Tree Bindings
 PXA168 Aspenite Board
 Required root node properties:
 	- compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+PXA910 DKB Board
+Required root node properties:
+	- compatible = "mrvl,pxa910-dkb";
+
+MMP2 Brownstone Board
+Required root node properties:
+	- compatible = "mrvl,mmp2-brownstone";
diff --git a/Documentation/devicetree/bindings/arm/mrvl/timer.txt b/Documentation/devicetree/bindings/arm/mrvl/timer.txt
new file mode 100644
index 00000000000..9a6e251462e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/timer.txt
@@ -0,0 +1,13 @@
+* Marvell MMP Timer controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-timer".
+- reg : Address and length of the register set of timer controller.
+- interrupts : Should be the interrupt number.
+
+Example:
+	timer0: timer@d4014000 {
+		compatible = "mrvl,mmp-timer";
+		reg = <0xd4014000 0x100>;
+		interrupts = <13>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt
index f8e54f09232..aa5f355cc94 100644
--- a/Documentation/devicetree/bindings/arm/spear.txt
+++ b/Documentation/devicetree/bindings/arm/spear.txt
@@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties:
 Required root node property:
 
 compatible = "st,spear600";
+
+Boards with the ST SPEAr300 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear300";
+
+Boards with the ST SPEAr310 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear310";
+
+Boards with the ST SPEAr320 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear320";
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
new file mode 100644
index 00000000000..ee87467ad8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
@@ -0,0 +1,31 @@
+Nomadik GPIO controller
+
+Required properties:
+- compatible            : Should be "st,nomadik-gpio".
+- reg                   : Physical base address and length of the controller's registers.
+- interrupts            : The interrupt outputs from the controller.
+- #gpio-cells           : Should be two:
+                            The first cell is the pin number.
+                            The second cell is used to specify optional parameters:
+                              - bits[3:0] trigger type and level flags:
+                                  1 = low-to-high edge triggered.
+                                  2 = high-to-low edge triggered.
+                                  4 = active high level-sensitive.
+                                  8 = active low level-sensitive.
+- gpio-controller       : Marks the device node as a GPIO controller.
+- interrupt-controller  : Marks the device node as an interrupt controller.
+- gpio-bank             : Specifies which bank a controller owns.
+- st,supports-sleepmode : Specifies whether controller can sleep or not
+
+Example:
+
+                gpio1: gpio@8012e080 {
+                        compatible = "st,nomadik-gpio";
+                        reg =  <0x8012e080 0x80>;
+                        interrupts = <0 120 0x4>;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        interrupt-controller;
+                        supports-sleepmode;
+                        gpio-bank = <1>;
+                };
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 1e34cfe5ebe..05428f39d9a 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -3,19 +3,25 @@
 Required properties:
 - compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
 - reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins, if
-- interrupt-name : Should be the name of irq resource.
-  one number.
+- interrupts : Should be the port interrupt shared by all gpio pins.
+  There're three gpio interrupts in arch-pxa, and they're gpio0,
+  gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
+  gpio_mux.
+- interrupt-name : Should be the name of irq resource. Each interrupt
+  binds its interrupt-name.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source.
 - gpio-controller : Marks the device node as a gpio controller.
 - #gpio-cells : Should be one.  It is the pin number.
 
 Example:
 
 	gpio: gpio@d4019000 {
-		compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+		compatible = "mrvl,mmp-gpio";
 		reg = <0xd4019000 0x1000>;
-		interrupts = <49>, <17>, <18>;
-		interrupt-name = "gpio_mux", "gpio0", "gpio1";
+		interrupts = <49>;
+		interrupt-name = "gpio_mux";
 		gpio-controller;
 		#gpio-cells = <1>;
 		interrupt-controller;
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
index 071eb3caae9..b891ee21835 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -3,34 +3,31 @@
 Required properties :
 
  - reg : Offset and length of the register set for the device
- - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
+ - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
    compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
    For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
    as shown in the example below.
 
 Recommended properties :
 
- - interrupts : <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.  This should be encoded based on
-   the information in section 2) depending on the type of interrupt
-   controller you have.
+ - interrupts : the interrupt number
  - interrupt-parent : the phandle for the interrupt controller that
-   services interrupts for this device.
+   services interrupts for this device. If the parent is the default
+   interrupt controller in device tree, it could be ignored.
  - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
    status register of i2c controller instead.
  - mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
 
 Examples:
 	twsi1: i2c@d4011000 {
-		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		compatible = "mrvl,mmp-twsi";
 		reg = <0xd4011000 0x1000>;
 		interrupts = <7>;
 		mrvl,i2c-fast-mode;
 	};
 	
 	twsi2: i2c@d4025000 {
-		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		compatible = "mrvl,mmp-twsi";
 		reg = <0xd4025000 0x1000>;
 		interrupts = <58>;
 	};
diff --git a/Documentation/devicetree/bindings/i2c/pnx.txt b/Documentation/devicetree/bindings/i2c/pnx.txt
new file mode 100644
index 00000000000..fe98ada33ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/pnx.txt
@@ -0,0 +1,36 @@
+* NXP PNX I2C Controller
+
+Required properties:
+
+ - reg: Offset and length of the register set for the device
+ - compatible: should be "nxp,pnx-i2c"
+ - interrupts: configure one interrupt line
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+ - interrupt-parent: the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Optional properties:
+
+ - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
+
+Examples:
+
+	i2c1: i2c@400a0000 {
+		compatible = "nxp,pnx-i2c";
+		reg = <0x400a0000 0x100>;
+		interrupt-parent = <&mic>;
+		interrupts = <51 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c2: i2c@400a8000 {
+		compatible = "nxp,pnx-i2c";
+		reg = <0x400a8000 0x100>;
+		interrupt-parent = <&mic>;
+		interrupts = <50 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/net/lpc-eth.txt b/Documentation/devicetree/bindings/net/lpc-eth.txt
new file mode 100644
index 00000000000..585021acd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lpc-eth.txt
@@ -0,0 +1,24 @@
+* NXP LPC32xx SoC Ethernet Controller
+
+Required properties:
+- compatible: Should be "nxp,lpc-eth"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain ethernet controller interrupt
+
+Optional properties:
+- phy-mode: String, operation mode of the PHY interface.
+  Supported values are: "mii", "rmii" (default)
+- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+- local-mac-address : 6 bytes, mac address
+
+Example:
+
+	mac: ethernet@31060000 {
+		compatible = "nxp,lpc-eth";
+		reg = <0x31060000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <29 0>;
+
+		phy-mode = "rmii";
+		use-iram;
+	};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 64ae22c4fce..82936f63cf1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -571,6 +571,7 @@ config ARCH_LPC32XX
 	select USB_ARCH_HAS_OHCI
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
 
@@ -606,6 +607,7 @@ config ARCH_MMP
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select IRQ_DOMAIN
 	select PLAT_PXA
 	select SPARSE_IRQ
 	select GENERIC_ALLOCATOR
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
new file mode 100644
index 00000000000..f449efc9825
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -0,0 +1,273 @@
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9260 family SoC";
+	compatible = "atmel,at91sam9260";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		serial5 = &usart4;
+		serial6 = &usart5;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 4 18 4 19 4>;
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 4 27 4 28 4>;
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart3: serial@fffd0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd0000 0x200>;
+				interrupts = <23 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart4: serial@fffd4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd4000 0x200>;
+				interrupts = <24 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart5: serial@fffd8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffd8000 0x200>;
+				interrupts = <25 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21 4>;
+				status = "disabled";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 4>;
+				status = "disabled";
+			};
+
+			adc0: adc@fffe0000 {
+				compatible = "atmel,at91sam9260-adc";
+				reg = <0xfffe0000 0x100>;
+				interrupts = <5 4>;
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0xf>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-num-channels = <4>;
+				atmel,adc-startup-time = <15>;
+				atmel,adc-channel-base = <0x30>;
+				atmel,adc-drdy-mask = <0x10000>;
+				atmel,adc-status-register = <0x1c>;
+				atmel,adc-trigger-register = <0x04>;
+
+				trigger@0 {
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger@1 {
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger@2 {
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger@3 {
+					trigger-name = "external";
+					trigger-value = <0x13>;
+					trigger-external;
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe800 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioC 13 0
+				 &pioC 14 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 0 /* sda */
+			 &pioA 24 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
new file mode 100644
index 00000000000..0209913a65a
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -0,0 +1,220 @@
+/*
+ * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9263 family SoC";
+	compatible = "atmel,at91sam9263";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+			};
+
+			ramc: ramc@ffffe200 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe200 0x200
+				       0xffffe800 0x200>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfff7c000 0x100>;
+				interrupts = <19 4>;
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pioA: gpio@fffff200 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioD: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioE: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				interrupts = <8 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				interrupts = <9 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <21 4>;
+				status = "disabled";
+			};
+
+			usb1: gadget@fff78000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfff78000 0x4000>;
+				interrupts = <24 4>;
+				status = "disabled";
+			};
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000
+			       0xffffe000 0x200
+			      >;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			gpios = <&pioA 22 0
+				 &pioD 15 0
+				 0
+				>;
+			status = "disabled";
+		};
+
+		usb0: ohci@00a00000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00a00000 0x100000>;
+			interrupts = <29 4>;
+			status = "disabled";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioB 4 0 /* sda */
+			 &pioB 5 0 /* scl */
+			>;
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
new file mode 100644
index 00000000000..f86ac4b609f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -0,0 +1,156 @@
+/*
+ * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Atmel at91sam9263ek";
+	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <16367660>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			usart0: serial@fff8c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioA 25 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+			atmel,vbus-gpio = <&pioA 24 0
+					   &pioA 21 0
+					  >;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d3 {
+			label = "d3";
+			gpios = <&pioB 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d2 {
+			label = "d2";
+			gpios = <&pioC 29 1>;
+			linux,default-trigger = "nand-disk";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioC 5 1>;
+			linux,code = <272>;
+			gpio-key,wakeup;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioC 4 1>;
+			linux,code = <273>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+			pagesize = <128>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 773ef484037..2a1d1ca8bd8 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -1,238 +1,26 @@
 /*
  * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
  *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
- * Licensed under GPLv2 or later.
+ * Licensed under GPLv2.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "at91sam9260.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G20 family SoC";
 	compatible = "atmel,at91sam9g20";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		serial5 = &usart4;
-		serial6 = &usart5;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-	};
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
 
 	memory {
 		reg = <0x20000000 0x08000000>;
 	};
 
 	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
 		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4>;
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 18 4 19 4>;
-			};
-
-			tcb1: timer@fffdc000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffdc000 0x100>;
-				interrupts = <26 4 27 4 28 4>;
-			};
-
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 4>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				interrupts = <6 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				interrupts = <7 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				interrupts = <8 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart3: serial@fffd0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd0000 0x200>;
-				interrupts = <23 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart4: serial@fffd4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd4000 0x200>;
-				interrupts = <24 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart5: serial@fffd8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd8000 0x200>;
-				interrupts = <25 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffc4000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xfffc4000 0x100>;
-				interrupts = <21 4>;
-				status = "disabled";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 4>;
-				status = "disabled";
+			adc0: adc@fffe0000 {
+				atmel,adc-startup-time = <40>;
 			};
 		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe800 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 13 0
-				 &pioC 14 0
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 4>;
-			status = "disabled";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
new file mode 100644
index 00000000000..e5324bf9d52
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek";
+	compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
new file mode 100644
index 00000000000..f1b2e148ac8
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20ek_common.dtsi"
+
+/ {
+	model = "Atmel at91sam9g20ek 2 mmc";
+	compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioB 9 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioB 8 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
new file mode 100644
index 00000000000..b06c0db273b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -0,0 +1,142 @@
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/include/ "at91sam9g20.dtsi"
+
+/ {
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "24c512";
+			reg = <0x50>;
+		};
+
+		wm8731@1b {
+			compatible = "wm8731";
+			reg = <0x1b>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		btn3 {
+			label = "Buttin 3";
+			gpios = <&pioA 30 1>;
+			linux,code = <0x103>;
+			gpio-key,wakeup;
+		};
+
+		btn4 {
+			label = "Buttin 4";
+			gpios = <&pioA 31 1>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index 14bc3070509..881bc398784 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -55,83 +55,101 @@
 
 		gpio0: gpio@8012e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8012e000 0x80>;
 			interrupts = <0 119 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
 		};
 
 		gpio1: gpio@8012e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8012e080 0x80>;
 			interrupts = <0 120 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
 		};
 
 		gpio2: gpio@8000e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e000 0x80>;
 			interrupts = <0 121 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
 		};
 
 		gpio3: gpio@8000e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e080 0x80>;
 			interrupts = <0 122 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
 		};
 
 		gpio4: gpio@8000e100 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e100 0x80>;
 			interrupts = <0 123 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
 		};
 
 		gpio5: gpio@8000e180 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8000e180 0x80>;
 			interrupts = <0 124 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
 		};
 
 		gpio6: gpio@8011e000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8011e000 0x80>;
 			interrupts = <0 125 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
 		};
 
 		gpio7: gpio@8011e080 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0x8011e080 0x80>;
 			interrupts = <0 126 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
 		};
 
 		gpio8: gpio@a03fe000 {
 			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
+				"st,nomadik-gpio";
 			reg =  <0xa03fe000 0x80>;
 			interrupts = <0 127 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
 		};
 
 		usb@a03e0000 {
@@ -153,7 +171,13 @@
 			reg = <0x80157000 0x1000>;
 			interrupts = <46 47>;
 			#address-cells = <1>;
-			#size-cells = <0>;
+			#size-cells = <1>;
+			ranges;
+
+				prcmu-timer-4@80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
 
 			ab8500@5 {
 				compatible = "stericsson,ab8500";
@@ -163,7 +187,7 @@
 		};
 
 		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 0x4>;
 			#address-cells = <1>;
@@ -171,7 +195,7 @@
 		};
 
 		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 0x4>;
 			#address-cells = <1>;
@@ -179,7 +203,7 @@
 		};
 
 		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 0x4>;
 			#address-cells = <1>;
@@ -187,7 +211,7 @@
 		};
 
 		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 0x4>;
 			#address-cells = <1>;
@@ -195,7 +219,7 @@
 		};
 
 		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 0x4>;
 			#address-cells = <1>;
@@ -270,5 +294,14 @@
 			interrupts = <0 100 0x4>;
 			status = "disabled";
 		};
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
new file mode 100644
index 00000000000..1ea9d34460a
--- /dev/null
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -0,0 +1,84 @@
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+	model = "Ethernut 5";
+	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			gpios = <0
+				 &pioC 14 0
+				 0
+				>;
+
+			root@0 {
+				label = "root";
+				reg = <0x0 0x08000000>;
+			};
+
+			data@20000 {
+				label = "data";
+				reg = <0x08000000 0x38000000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		pcf8563@50 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
new file mode 100644
index 00000000000..e8814fe0e27
--- /dev/null
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -0,0 +1,138 @@
+/*
+ * kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+
+	model = "Overkiz kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
+	};
+
+	memory {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "mii";
+				status = "okay";
+			};
+
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			status = "okay";
+
+			bootloaderkernel@0 {
+				label = "bootloader-kernel";
+				reg = <0x0 0xc0000>;
+			};
+
+			ubi@c0000 {
+				label = "ubi";
+				reg = <0xc0000 0x7f40000>;
+			};
+
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		pcf8563@51 {
+			/* nxp pcf8563 rtc */
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1g {
+			label = "led1:green";
+			gpios = <&pioB 0 1>;
+			linux,default-trigger = "none";
+		};
+
+		led1r {
+			label = "led1:red";
+			gpios = <&pioB 1 1>;
+			linux,default-trigger = "none";
+		};
+
+		led2g {
+			label = "led2:green";
+			gpios = <&pioB 2 1>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		led2r {
+			label = "led2:red";
+			gpios = <&pioB 3 1>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "reset";
+			gpios = <&pioB 30 1>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+
+		mode {
+			label = "mode";
+			gpios = <&pioB 31 1>;
+			linux,code = <0x101>;
+			gpio-key,wakeup;
+		};
+	};
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
new file mode 100644
index 00000000000..2d696866f71
--- /dev/null
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -0,0 +1,292 @@
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "nxp,lpc3220";
+	interrupt-parent = <&mic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x20000000 0x20000000 0x30000000>;
+
+		/*
+		 * Enable either SLC or MLC
+		 */
+		slc: flash@20020000 {
+			compatible = "nxp,lpc3220-slc";
+			reg = <0x20020000 0x1000>;
+			status = "disable";
+		};
+
+		mlc: flash@200B0000 {
+			compatible = "nxp,lpc3220-mlc";
+			reg = <0x200B0000 0x1000>;
+			status = "disable";
+		};
+
+		dma@31000000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x31000000 0x1000>;
+			interrupts = <0x1c 0>;
+		};
+
+		/*
+		 * Enable either ohci or usbd (gadget)!
+		 */
+		ohci@31020000 {
+			compatible = "nxp,ohci-nxp", "usb-ohci";
+			reg = <0x31020000 0x300>;
+			interrupts = <0x3b 0>;
+			status = "disable";
+		};
+
+		usbd@31020000 {
+			compatible = "nxp,lpc3220-udc";
+			reg = <0x31020000 0x300>;
+			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+			status = "disable";
+		};
+
+		clcd@31040000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x31040000 0x1000>;
+			interrupts = <0x0e 0>;
+			status = "disable";
+		};
+
+		mac: ethernet@31060000 {
+			compatible = "nxp,lpc-eth";
+			reg = <0x31060000 0x1000>;
+			interrupts = <0x1d 0>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			ssp0: ssp@20084000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x20084000 0x1000>;
+				interrupts = <0x14 0>;
+			};
+
+			spi1: spi@20088000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20088000 0x1000>;
+			};
+
+			ssp1: ssp@2008c000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x2008c000 0x1000>;
+				interrupts = <0x15 0>;
+			};
+
+			spi2: spi@20090000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20090000 0x1000>;
+			};
+
+			i2s0: i2s@20094000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x20094000 0x1000>;
+			};
+
+			sd@20098000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x20098000 0x1000>;
+				interrupts = <0x0f 0>, <0x0d 0>;
+			};
+
+			i2s1: i2s@2009C000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x2009C000 0x1000>;
+			};
+
+			uart3: serial@40080000 {
+				compatible = "nxp,serial";
+				reg = <0x40080000 0x1000>;
+			};
+
+			uart4: serial@40088000 {
+				compatible = "nxp,serial";
+				reg = <0x40088000 0x1000>;
+			};
+
+			uart5: serial@40090000 {
+				compatible = "nxp,serial";
+				reg = <0x40090000 0x1000>;
+			};
+
+			uart6: serial@40098000 {
+				compatible = "nxp,serial";
+				reg = <0x40098000 0x1000>;
+			};
+
+			i2c1: i2c@400A0000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A0000 0x100>;
+				interrupts = <0x33 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			i2c2: i2c@400A8000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A8000 0x100>;
+				interrupts = <0x32 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			i2cusb: i2c@31020300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x31020300 0x100>;
+				interrupts = <0x3f 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+		};
+
+		fab {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/*
+			 * MIC Interrupt controller includes:
+			 *   MIC @40008000
+			 *   SIC1 @4000C000
+			 *   SIC2 @40010000
+			 */
+			mic: interrupt-controller@40008000 {
+				compatible = "nxp,lpc3220-mic";
+				interrupt-controller;
+				reg = <0x40008000 0xC000>;
+				#interrupt-cells = <2>;
+			};
+
+			uart1: serial@40014000 {
+				compatible = "nxp,serial";
+				reg = <0x40014000 0x1000>;
+			};
+
+			uart2: serial@40018000 {
+				compatible = "nxp,serial";
+				reg = <0x40018000 0x1000>;
+			};
+
+			uart7: serial@4001C000 {
+				compatible = "nxp,serial";
+				reg = <0x4001C000 0x1000>;
+			};
+
+			rtc@40024000 {
+				compatible = "nxp,lpc3220-rtc";
+				reg = <0x40024000 0x1000>;
+				interrupts = <0x34 0>;
+			};
+
+			gpio: gpio@40028000 {
+				compatible = "nxp,lpc3220-gpio";
+				reg = <0x40028000 0x1000>;
+				/* create a private address space for enumeration */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio_p0: gpio-bank@0 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0>;
+				};
+
+				gpio_p1: gpio-bank@1 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <1>;
+				};
+
+				gpio_p2: gpio-bank@2 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <2>;
+				};
+
+				gpio_p3: gpio-bank@3 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <3>;
+				};
+
+				gpi_p3: gpio-bank@4 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <4>;
+				};
+
+				gpo_p3: gpio-bank@5 {
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <5>;
+				};
+			};
+
+			watchdog@4003C000 {
+				compatible = "nxp,pnx4008-wdt";
+				reg = <0x4003C000 0x1000>;
+			};
+
+			/*
+			 * TSC vs. ADC: Since those two share the same
+			 * hardware, you need to choose from one of the
+			 * following two and do 'status = "okay";' for one of
+			 * them
+			 */
+
+			adc@40048000 {
+				compatible = "nxp,lpc3220-adc";
+				reg = <0x40048000 0x1000>;
+				interrupts = <0x27 0>;
+				status = "disable";
+			};
+
+			tsc@40048000 {
+				compatible = "nxp,lpc3220-tsc";
+				reg = <0x40048000 0x1000>;
+				interrupts = <0x27 0>;
+				status = "disable";
+			};
+
+			key@40050000 {
+				compatible = "nxp,lpc3220-key";
+				reg = <0x40050000 0x1000>;
+			};
+
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
new file mode 100644
index 00000000000..153a4b2d12b
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "mmp2.dtsi"
+
+/ {
+	model = "Marvell MMP2 Aspenite Development Board";
+	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+	chosen {
+		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart3: uart@d4018000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
new file mode 100644
index 00000000000..80f74e25640
--- /dev/null
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -0,0 +1,220 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp2-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			intcmux4@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <4>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux5: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <5>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+				mrvl,clr-mfp-irq = <1>;
+			};
+
+			intcmux9: interrupt-controller@d4282180 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <9>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x180 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			intcmux17: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <17>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			intcmux35: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <35>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <15>;
+			};
+
+			intcmux51: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <51>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux55: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <55>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x184 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			uart1: uart@d4030000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			uart4: uart@d4016000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1 0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&intcmux5>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 9f72cd4cf30..8c756be4d7a 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -18,3 +18,52 @@
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 };
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		vsim: regulator@10 {
+			compatible = "ti,twl4030-vsim";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	ti,bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disable";
+};
+
+&mmc3 {
+	status = "disable";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index c6121357c1e..99474fa5fac 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -69,6 +69,60 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		gpio1: gpio@48310000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@49050000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@49052000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@49054000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@49056000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@49058000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
@@ -113,5 +167,53 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap2-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc2";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap3-hsmmc";
+			ti,hwmods = "mmc3";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5917f..e671361bc79 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -17,4 +17,75 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "pandaboard::status1";
+			gpios = <&gpio1 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "pandaboard::status2";
+			gpios = <&gpio1 8 0>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in their EEPROM as EDID data.
+	 * The EEPROM is connected as I2C slave device.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disable";
+};
+
+&mmc3 {
+	status = "disable";
+};
+
+&mmc4 {
+	status = "disable";
+};
+
+&mmc5 {
+	ti,non-removable;
+	ti,bus-width = <4>;
 };
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b2bf4..e5eeb6f9c6e 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -17,4 +17,144 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
+
+	vdd_eth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug0 {
+			label = "omap4:green:debug0";
+			gpios = <&gpio2 29 0>; /* 61 */
+		};
+
+		debug1 {
+			label = "omap4:green:debug1";
+			gpios = <&gpio1 30 0>; /* 30 */
+		};
+
+		debug2 {
+			label = "omap4:green:debug2";
+			gpios = <&gpio1 7 0>; /* 7 */
+		};
+
+		debug3 {
+			label = "omap4:green:debug3";
+			gpios = <&gpio1 8 0>; /* 8 */
+		};
+
+		debug4 {
+			label = "omap4:green:debug4";
+			gpios = <&gpio2 18 0>; /* 50 */
+		};
+
+		user1 {
+			label = "omap4:blue:user";
+			gpios = <&gpio6 9 0>; /* 169 */
+		};
+
+		user2 {
+			label = "omap4:red:user";
+			gpios = <&gpio6 10 0>; /* 170 */
+		};
+
+		user3 {
+			label = "omap4:green:user";
+			gpios = <&gpio5 11 0>; /* 139 */
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+};
+
+/include/ "twl6030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * Temperature Sensor
+	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 */
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+	};
+
+	/*
+	 * Ambient Light Sensor
+	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 */
+	bh1780@29 {
+		compatible = "rohm,bh1780";
+		reg = <0x29>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	/*
+	 * 3-Axis Digital Compass
+	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+};
+
+&mcspi1 {
+	eth@0 {
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux1>;
+	ti,bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disable";
+};
+
+&mmc4 {
+	status = "disable";
+};
+
+&mmc5 {
+	ti,bus-width = <4>;
+	ti,non-removable;
 };
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3d35559e77b..359c4979c8a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -104,6 +104,60 @@
 			      <0x48240100 0x0100>;
 		};
 
+		gpio1: gpio@4a310000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			ti,hwmods = "uart1";
@@ -155,5 +209,68 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
 		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+		};
+
+		mmc5: mmc@480d5000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc5";
+			ti,needs-special-reset;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
new file mode 100644
index 00000000000..0167e86314c
--- /dev/null
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -0,0 +1,145 @@
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc3250";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x4000000>;
+	};
+
+	ahb {
+		mac: ethernet@31060000 {
+			phy-mode = "rmii";
+			use-iram;
+		};
+
+		/* Here, choose exactly one from: ohci, usbd */
+		ohci@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+
+/*
+		usbd@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+*/
+
+		clcd@31040000 {
+			status = "okay";
+		};
+
+		/* 64MB Flash via SLC NAND controller */
+		slc: flash@20020000 {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mtd0@00000000 {
+				label = "phy3250-boot";
+				reg = <0x00000000 0x00064000>;
+				read-only;
+			};
+
+			mtd1@00064000 {
+				label = "phy3250-uboot";
+				reg = <0x00064000 0x00190000>;
+				read-only;
+			};
+
+			mtd2@001f4000 {
+				label = "phy3250-ubt-prms";
+				reg = <0x001f4000 0x00010000>;
+			};
+
+			mtd3@00204000 {
+				label = "phy3250-kernel";
+				reg = <0x00204000 0x00400000>;
+			};
+
+			mtd4@00604000 {
+				label = "phy3250-rootfs";
+				reg = <0x00604000 0x039fc000>;
+			};
+		};
+
+		apb {
+			i2c1: i2c@400A0000 {
+				clock-frequency = <100000>;
+
+				pcf8563: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				uda1380: uda1380@18 {
+					compatible = "nxp,uda1380";
+					reg = <0x18>;
+					power-gpio = <&gpio 0x59 0>;
+					reset-gpio = <&gpio 0x51 0>;
+					dac-clk = "wspll";
+				};
+			};
+
+			i2c2: i2c@400A8000 {
+				clock-frequency = <100000>;
+			};
+
+			i2cusb: i2c@31020300 {
+				clock-frequency = <100000>;
+
+				isp1301: usb-transceiver@2c {
+					compatible = "nxp,isp1301";
+					reg = <0x2c>;
+				};
+			};
+
+			ssp0: ssp@20084000 {
+				eeprom: at25@0 {
+					compatible = "atmel,at25";
+				};
+			};
+		};
+
+		fab {
+			tsc@40048000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpo_p3 1 1>; /* GPO_P3 1, GPIO 80, active low */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			gpios = <&gpo_p3 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index d32d5128f22..31a71869608 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -18,13 +18,6 @@
 		i2c1 = &twsi2;
 	};
 
-	intc: intc-interrupt-controller@d4282000 {
-		compatible = "mrvl,mmp-intc", "mrvl,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xd4282000 0x1000>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -32,6 +25,23 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
 		apb@d4000000 {	/* APB */
 			compatible = "mrvl,apb-bus", "simple-bus";
 			#address-cells = <1>;
@@ -39,40 +49,65 @@
 			reg = <0xd4000000 0x00200000>;
 			ranges;
 
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
 			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4017000 0x1000>;
 				interrupts = <27>;
 				status = "disabled";
 			};
 
 			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4018000 0x1000>;
 				interrupts = <28>;
 				status = "disabled";
 			};
 
 			uart3: uart@d4026000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				compatible = "mrvl,mmp-uart";
 				reg = <0xd4026000 0x1000>;
 				interrupts = <29>;
 				status = "disabled";
 			};
 
-			gpio: gpio@d4019000 {
-				compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
 				interrupts = <49>;
 				interrupt-names = "gpio_mux";
-				gpio-controller;
-				#gpio-cells = <1>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
 			};
 
 			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				compatible = "mrvl,mmp-twsi";
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				mrvl,i2c-fast-mode;
@@ -80,7 +115,7 @@
 			};
 
 			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				compatible = "mrvl,mmp-twsi";
 				reg = <0xd4025000 0x1000>;
 				interrupts = <58>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
new file mode 100644
index 00000000000..e92be5a474e
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa910.dtsi"
+
+/ {
+	model = "Marvell PXA910 DKB Development Board";
+	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart1: uart@d4017000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
new file mode 100644
index 00000000000..aebf32de73b
--- /dev/null
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -0,0 +1,140 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			timer1: timer@d4016000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4016000 0x100>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			uart1: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4036000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4036000 0x1000>;
+				interrupts = <59>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4037000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4037000 0x1000>;
+				interrupts = <54>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5 6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
new file mode 100644
index 00000000000..677fc603f8b
--- /dev/null
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -0,0 +1,21 @@
+/*
+ * Device Tree Source for the sh7372 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,sh7372";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 359c6d67915..d99dc04f0d9 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -30,35 +30,35 @@
 			wakeup = <1>;
 			linux,code = <2>;
 			label = "userpb";
-			gpios = <&gpio1 0>;
+			gpios = <&gpio1 0 0>;
 		};
 		button@2 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <3>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
+			label = "extkb1";
+			gpios = <&gpio4 23 0>;
 		};
 		button@3 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <4>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
+			label = "extkb2";
+			gpios = <&gpio4 24 0>;
 		};
 		button@4 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <5>;
-			label = "userpb";
-			gpios = <&gpio5 1>;
+			label = "extkb3";
+			gpios = <&gpio5 1 0>;
 		};
 		button@5 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <6>;
-			label = "userpb";
-			gpios = <&gpio5 2>;
+			label = "extkb4";
+			gpios = <&gpio5 2 0>;
 		};
 	};
 
@@ -73,17 +73,19 @@
 	soc-u9500 {
 
 		external-bus@50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			ethernet@50000000 {
-				compatible = "smsc,9111";
-				reg = <0x50000000 0x10000>;
-				interrupts = <12>;
+			status = "okay";
+
+			ethernet@0 {
+				compatible = "smsc,lan9115";
+				reg = <0 0x10000>;
+				interrupts = <12 0x1>;
 				interrupt-parent = <&gpio4>;
+
+				reg-shift = <1>;
+				reg-io-width = <2>;
+				smsc,force-internal-phy;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
new file mode 100644
index 00000000000..6a79d69775b
--- /dev/null
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -0,0 +1,183 @@
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		clcd@60000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@94000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			int-gpio = <&gpio1 0 0>;
+			power-gpio = <&gpio1 2 1>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@a9000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			kbd@a0000000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
new file mode 100644
index 00000000000..f9fcbf4f477
--- /dev/null
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -0,0 +1,72 @@
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x60000000 0x60000000 0x50000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		clcd@60000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x60000000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		fsmc: flash@94000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x94000000 0x1000	/* FSMC Register */
+			       0x80000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <1>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			gpio1: gpio@a9000000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xa9000000 0x1000>;
+				status = "disabled";
+			};
+
+			kbd@a0000000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xa0000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
new file mode 100644
index 00000000000..c86af33f700
--- /dev/null
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -0,0 +1,111 @@
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+	model = "ST SPEAr310 Evaluation Board";
+	compatible = "st,spear310-evb", "st,spear310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@44000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				label = "m25p64";
+				reg = <0xf8000000 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				st,smi-fast-mode;
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@b2000000 {
+			       status = "okay";
+			};
+
+			serial@b2080000 {
+			       status = "okay";
+			};
+
+			serial@b2100000 {
+			       status = "okay";
+			};
+
+			serial@b2180000 {
+			       status = "okay";
+			};
+
+			serial@b2200000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
new file mode 100644
index 00000000000..dc7fa14da84
--- /dev/null
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -0,0 +1,75 @@
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		fsmc: flash@44000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x44000000 0x1000	/* FSMC Register */
+			       0x40000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x10000>;
+			st,cle-off = <0x20000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			serial@b2000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2080000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2100000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2180000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2180000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2200000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2200000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
new file mode 100644
index 00000000000..d43de712e86
--- /dev/null
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -0,0 +1,112 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		clcd@90000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpio0 2 1>;
+			power_always_enb;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
new file mode 100644
index 00000000000..9a0267a5a0b
--- /dev/null
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -0,0 +1,90 @@
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x70000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		clcd@90000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x90000000 0x1000>;
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		fsmc: flash@4c000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4c000000 0x1000	/* FSMC Register */
+			       0x50000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		spi1: spi@a5000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa5000000 0x1000>;
+			status = "disabled";
+		};
+
+		spi2: spi@a6000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa6000000 0x1000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			i2c1: i2c@a7000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xa7000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a3000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa3000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a4000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa4000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
new file mode 100644
index 00000000000..0ae7c8e8631
--- /dev/null
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -0,0 +1,144 @@
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&vic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <8>;
+			status = "disabled";
+		};
+
+		gmac: eth@e0800000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe0800000 0x8000>;
+			interrupts = <23 22>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		spi0: spi@d0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xd0100000 0x1000>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupts = <25>;
+			status = "disabled";
+		};
+
+		ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			gpio0: gpio@fc980000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xfc980000 0x1000>;
+				interrupts = <11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@d0180000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0180000 0x1000>;
+				interrupts = <21>;
+				status = "disabled";
+			};
+
+			rtc@fc900000 {
+				compatible = "st,spear-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupts = <19>;
+				status = "disabled";
+			};
+
+			wdt@fc880000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0xfc880000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
index 636292e18c9..790a7a8a5cc 100644
--- a/arch/arm/boot/dts/spear600-evb.dts
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -24,6 +24,10 @@
 	};
 
 	ahb {
+		dma@fc400000 {
+			status = "okay";
+		};
+
 		gmac: ethernet@e0800000 {
 			phy-mode = "gmii";
 			status = "okay";
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index ebe0885a2b9..d777e3a6f17 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -45,6 +45,14 @@
 			#interrupt-cells = <1>;
 		};
 
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
 		gmac: ethernet@e0800000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe0800000 0x8000>;
diff --git a/arch/arm/boot/dts/tny_a9260.dts b/arch/arm/boot/dts/tny_a9260.dts
new file mode 100644
index 00000000000..367a16dcd5e
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9260.dts - Device Tree file for Caloa TNY A9260 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9260";
+	compatible = "calao,tny-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi
new file mode 100644
index 00000000000..0e6d3de2e09
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9260_common.dtsi
@@ -0,0 +1,83 @@
+/*
+ * tny_a9260_common.dtsi - Device Tree file for Caloa TNY A926x board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock6 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts
new file mode 100644
index 00000000000..dee9c571306
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9263.dts
@@ -0,0 +1,97 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Calao TNY A9263";
+	compatible = "atmel,tny-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/tny_a9g20.dts b/arch/arm/boot/dts/tny_a9g20.dts
new file mode 100644
index 00000000000..e1ab64c72db
--- /dev/null
+++ b/arch/arm/boot/dts/tny_a9g20.dts
@@ -0,0 +1,15 @@
+/*
+ * tny_a9g20.dts - Device Tree file for Caloa TNY A9G20 board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+/include/ "tny_a9260_common.dtsi"
+
+/ {
+	model = "Calao TNY A9G20";
+	compatible = "calao,tny-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
new file mode 100644
index 00000000000..22f4d1394ed
--- /dev/null
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+	compatible = "ti,twl4030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vdac: regulator@0 {
+		compatible = "ti,twl4030-vdac";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vpll2: regulator@1 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vmmc1: regulator@2 {
+		compatible = "ti,twl4030-vmmc1";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
+	twl_gpio: gpio {
+		compatible = "ti,twl4030-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
new file mode 100644
index 00000000000..3b2f3510d7e
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+	compatible = "ti,twl6030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vaux1: regulator@0 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vaux2: regulator@1 {
+		compatible = "ti,twl6030-vaux2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	vaux3: regulator@2 {
+		compatible = "ti,twl6030-vaux3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vmmc: regulator@3 {
+		compatible = "ti,twl6030-vmmc";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vpp: regulator@4 {
+		compatible = "ti,twl6030-vpp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vusim: regulator@5 {
+		compatible = "ti,twl6030-vusim";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	vdac: regulator@6 {
+		compatible = "ti,twl6030-vdac";
+	};
+
+	vana: regulator@7 {
+		compatible = "ti,twl6030-vana";
+	};
+
+	vcxio: regulator@8 {
+		compatible = "ti,twl6030-vcxio";
+	};
+
+	vusb: regulator@9 {
+		compatible = "ti,twl6030-vusb";
+	};
+
+	v1v8: regulator@10 {
+		compatible = "ti,twl6030-v1v8";
+	};
+
+	v2v1: regulator@11 {
+		compatible = "ti,twl6030-v2v1";
+	};
+
+	clk32kg: regulator@12 {
+		compatible = "ti,twl6030-clk32kg";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260.dts b/arch/arm/boot/dts/usb_a9260.dts
new file mode 100644
index 00000000000..296216058c1
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260.dts
@@ -0,0 +1,23 @@
+/*
+ * usb_a9260.dts - Device Tree file for Caloa USB A9260 board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+/include/ "usb_a9260_common.dtsi"
+
+/ {
+	model = "Calao USB A9260";
+	compatible = "calao,usb-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
new file mode 100644
index 00000000000..e70d229baef
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -0,0 +1,117 @@
+/*
+ * usb_a926x.dts - Device Tree file for Caloa USB A926x board
+ *
+ *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 0>;
+				status = "okay";
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
new file mode 100644
index 00000000000..6fe05ccb620
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -0,0 +1,131 @@
+/*
+ * usb_a9263.dts - Device Tree file for Caloa USB A9293 board
+ *
+ *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+/include/ "at91sam9263.dtsi"
+
+/ {
+	model = "Calao USB A9263";
+	compatible = "atmel,usb-a9263", "atmel,at91sam9263", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fff78000 {
+				atmel,vbus-gpio = <&pioB 11 0>;
+				status = "okay";
+			};
+
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			barebox@20000 {
+				label = "barebox";
+				reg = <0x20000 0x40000>;
+			};
+
+			bareboxenv@60000 {
+				label = "bareboxenv";
+				reg = <0x60000 0x20000>;
+			};
+
+			bareboxenv2@80000 {
+				label = "bareboxenv2";
+				reg = <0x80000 0x20000>;
+			};
+
+			oftree@80000 {
+				label = "oftree";
+				reg = <0xa0000 0x20000>;
+			};
+
+			kernel@a0000 {
+				label = "kernel";
+				reg = <0xc0000 0x400000>;
+			};
+
+			rootfs@4a0000 {
+				label = "rootfs";
+				reg = <0x4c0000 0x7800000>;
+			};
+
+			data@7ca0000 {
+				label = "data";
+				reg = <0x7cc0000 0x8340000>;
+			};
+		};
+
+		usb0: ohci@00a00000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 7c2399c532e..2dacb16ce4a 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 /include/ "at91sam9g20.dtsi"
+/include/ "usb_a9260_common.dtsi"
 
 / {
 	model = "Calao USB A9G20";
@@ -20,108 +21,7 @@
 		reg = <0x20000000 0x4000000>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x20000>;
-			};
-
-			bareboxenv2@80000 {
-				label = "bareboxenv2";
-				reg = <0x80000 0x20000>;
-			};
-
-			kernel@a0000 {
-				label = "kernel";
-				reg = <0xa0000 0x400000>;
-			};
-
-			rootfs@4a0000 {
-				label = "rootfs";
-				reg = <0x4a0000 0x7800000>;
-			};
-
-			data@7ca0000 {
-				label = "data";
-				reg = <0x7ca0000 0x8360000>;
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led {
-			label = "user_led";
-			gpios = <&pioB 21 1>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb {
-			label = "user_pb";
-			gpios = <&pioB 10 1>;
-			linux,code = <28>;
-			gpio-key,wakeup;
-		};
-	};
-
 	i2c@0 {
-		status = "okay";
-
 		rv3029c2@56 {
 			compatible = "rv3029c2";
 			reg = <0x56>;
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index fb2088171ca..4fa60547494 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
@@ -10,6 +10,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -21,6 +22,8 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
@@ -40,7 +43,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
@@ -55,13 +59,24 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_PHYLIB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_LPC_ENET=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -97,16 +112,22 @@ CONFIG_SND_SEQUENCER=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_LPC32XX=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
@@ -114,10 +135,21 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1374=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_LPC32XX=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_STAGING=y
+CONFIG_IIO=y
+CONFIG_LPC32XX_ADC=y
 CONFIG_EXT2_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index fea7e1f026a..7ed42912d69 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -2,33 +2,67 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
-CONFIG_BOARD_SPEAR300_EVB=y
-CONFIG_BOARD_SPEAR310_EVB=y
-CONFIG_BOARD_SPEAR320_EVB=y
+CONFIG_MACH_SPEAR300=y
+CONFIG_MACH_SPEAR310=y
+CONFIG_MACH_SPEAR320=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
 # CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -39,8 +73,6 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -48,6 +80,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index cef2e836afd..cf94bc73a0e 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -2,29 +2,58 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_EVB=y
+CONFIG_BOARD_SPEAR600_DT=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -35,8 +64,6 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -44,6 +71,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 0da66ca4a4f..c03417ddbf0 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -14,7 +14,19 @@ initrd_phys-y	:= 0x20410000
 endif
 
 # Keep dtb files sorted alphabetically for each SoC
+# sam9260
+dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
+# sam9263
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
 # sam9g20
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
 dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
 # sam9g45
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index ad00fe91d37..d556de14111 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -702,25 +702,8 @@ static struct platform_device at91sam9260_tcb1_device = {
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
-	{ .compatible = "atmel,at91rm9200-tcb" },
-	{ /*sentinel*/ }
-};
-#endif
-
 static void __init at91_add_device_tc(void)
 {
-#if defined(CONFIG_OF)
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, tcb_ids);
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-
 	platform_device_register(&at91sam9260_tcb0_device);
 	platform_device_register(&at91sam9260_tcb1_device);
 }
@@ -1364,6 +1347,9 @@ void __init at91_add_device_cf(struct at91_cf_data * data) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
 	at91_add_device_tc();
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 7fae36502fb..ed91c7e9f7c 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -199,6 +199,16 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("pioC", &pioCDE_clk),
 	CLKDEV_CON_ID("pioD", &pioCDE_clk),
 	CLKDEV_CON_ID("pioE", &pioCDE_clk),
+	/* more usart lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+	/* more tc lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
+	CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index dfe5bc006d5..175e0009eaa 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -953,8 +953,25 @@ static struct platform_device at91sam9263_tcb_device = {
 	.num_resources	= ARRAY_SIZE(tcb_resources),
 };
 
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+	{ .compatible = "atmel,at91rm9200-tcb" },
+	{ /*sentinel*/ }
+};
+#endif
+
 static void __init at91_add_device_tc(void)
 {
+#if defined(CONFIG_OF)
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, tcb_ids);
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
+
 	platform_device_register(&at91sam9263_tcb_device);
 }
 #else
@@ -1483,6 +1500,9 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
 	at91_add_device_tc();
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index db2f88c246f..35bd42d0219 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -69,15 +69,7 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-#if defined(CONFIG_OF)
-	struct device_node *of_node =
-		of_find_node_by_name(NULL, "dma-controller");
-
-	if (of_node)
-		of_node_put(of_node);
-	else
-#endif
-		platform_device_register(&at_hdmac_device);
+	platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}
@@ -1094,25 +1086,8 @@ static struct platform_device at91sam9g45_tcb1_device = {
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
-	{ .compatible = "atmel,at91rm9200-tcb" },
-	{ /*sentinel*/ }
-};
-#endif
-
 static void __init at91_add_device_tc(void)
 {
-#if defined(CONFIG_OF)
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, tcb_ids);
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-
 	platform_device_register(&at91sam9g45_tcb0_device);
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
@@ -1763,6 +1738,9 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
 	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 332ecd40bd0..95393fcaf19 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -172,6 +172,10 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= SZ_128K,
 	}, {
+		.name	= "oftree",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_128K,
+	}, {
 		.name	= "kernel",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 4 * SZ_1M,
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index 75946ac89ee..e0b3eee8383 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -29,30 +29,4 @@ config ARCH_LPC32XX_UART6_SELECT
 
 endmenu
 
-menu "LPC32XX chip components"
-
-config ARCH_LPC32XX_IRAM_FOR_NET
-	bool "Use IRAM for network buffers"
-	default y
-	help
-	  Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
-	  network buffer.  If the total combined required buffer sizes is
-	  larger than the size of IRAM, then SDRAM will be used instead.
-
-	  This can be enabled safely if the IRAM is not intended for other
-	  uses.
-
-config ARCH_LPC32XX_MII_SUPPORT
-	bool "Check to enable MII support or leave disabled for RMII support"
-	help
-	  Say Y here to enable MII support, or N for RMII support. Regardless of
-	  which support is selected, the ethernet interface driver needs to be
-	  selected in the device driver networking section.
-
-	  The PHY3250 reference board uses RMII, so users of this board should
-	  say N.
-
-endmenu
-
 endif
-
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 2fc24ca1205..f6a3ffec1f4 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -1095,49 +1095,42 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = (d), \
-		.con_id = (n), \
-		.clk = &(c), \
-	},
-
 static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
-	_REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
-	_REGISTER_CLOCK(NULL, "osc_main", osc_main)
-	_REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
-	_REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
-	_REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
-	_REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
-	_REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
-	_REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
-	_REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
-	_REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
-	_REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
-	_REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
-	_REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
-	_REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
-	_REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
-	_REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
-	_REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
-	_REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
-	_REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
-	_REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
-	_REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
-	_REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
-	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
-	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
-	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
-	_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
-	_REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
-	_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
-	_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
-	_REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
-	_REGISTER_CLOCK("lpc-eth.0", NULL, clk_net)
-	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
-	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
-	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+	CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
+	CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
+	CLKDEV_INIT(NULL, "osc_main", &osc_main),
+	CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
+	CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
+	CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
+	CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
+	CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
+	CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
+	CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
+	CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
+	CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
+	CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
+	CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
+	CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
+	CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
+	CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
+	CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
+	CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
+	CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
+	CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
+	CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
+	CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
+	CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
+	CLKDEV_INIT("lpc32xx_keys.0", NULL, &clk_kscan),
+	CLKDEV_INIT("lpc32xx-nand.0", "nand_ck", &clk_nand),
+	CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
+	CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
+	CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
+	CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
+	CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
+	CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
+	CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
+	CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
+	CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
 };
 
 static int __init clk_init(void)
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index bbbf063a74c..5c96057b6d7 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -27,186 +27,11 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/i2c.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include "common.h"
 
 /*
- * Watchdog timer
- */
-static struct resource watchdog_resources[] = {
-	[0] = {
-		.start = LPC32XX_WDTIM_BASE,
-		.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device lpc32xx_watchdog_device = {
-	.name = "pnx4008-watchdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(watchdog_resources),
-	.resource = watchdog_resources,
-};
-
-/*
- * I2C busses
- */
-static struct i2c_pnx_data i2c0_data = {
-	.name = I2C_CHIP_NAME "1",
-	.base = LPC32XX_I2C1_BASE,
-	.irq = IRQ_LPC32XX_I2C_1,
-};
-
-static struct i2c_pnx_data i2c1_data = {
-	.name = I2C_CHIP_NAME "2",
-	.base = LPC32XX_I2C2_BASE,
-	.irq = IRQ_LPC32XX_I2C_2,
-};
-
-static struct i2c_pnx_data i2c2_data = {
-	.name = "USB-I2C",
-	.base = LPC32XX_OTG_I2C_BASE,
-	.irq = IRQ_LPC32XX_USB_I2C,
-};
-
-struct platform_device lpc32xx_i2c0_device = {
-	.name = "pnx-i2c",
-	.id = 0,
-	.dev = {
-		.platform_data = &i2c0_data,
-	},
-};
-
-struct platform_device lpc32xx_i2c1_device = {
-	.name = "pnx-i2c",
-	.id = 1,
-	.dev = {
-		.platform_data = &i2c1_data,
-	},
-};
-
-struct platform_device lpc32xx_i2c2_device = {
-	.name = "pnx-i2c",
-	.id = 2,
-	.dev = {
-		.platform_data = &i2c2_data,
-	},
-};
-
-/* TSC (Touch Screen Controller) */
-
-static struct resource lpc32xx_tsc_resources[] = {
-	{
-		.start = LPC32XX_ADC_BASE,
-		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_TS_IRQ,
-		.end = IRQ_LPC32XX_TS_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_tsc_device = {
-	.name =  "ts-lpc32xx",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
-	.resource = lpc32xx_tsc_resources,
-};
-
-/* RTC */
-
-static struct resource lpc32xx_rtc_resources[] = {
-	{
-		.start = LPC32XX_RTC_BASE,
-		.end = LPC32XX_RTC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},{
-		.start = IRQ_LPC32XX_RTC,
-		.end = IRQ_LPC32XX_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_rtc_device = {
-	.name =  "rtc-lpc32xx",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
-	.resource = lpc32xx_rtc_resources,
-};
-
-/*
- * ADC support
- */
-static struct resource adc_resources[] = {
-	{
-		.start = LPC32XX_ADC_BASE,
-		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_TS_IRQ,
-		.end = IRQ_LPC32XX_TS_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_adc_device = {
-	.name =  "lpc32xx-adc",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(adc_resources),
-	.resource = adc_resources,
-};
-
-/*
- * USB support
- */
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-static struct resource ohci_resources[] = {
-	{
-		.start = IO_ADDRESS(LPC32XX_USB_BASE),
-		.end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_USB_HOST,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-struct platform_device lpc32xx_ohci_device = {
-	.name = "usb-ohci",
-	.id = -1,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-	.num_resources = ARRAY_SIZE(ohci_resources),
-	.resource = ohci_resources,
-};
-
-/*
- * Network Support
- */
-static struct resource net_resources[] = {
-	[0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
-	[1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
-	[2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
-};
-
-static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
-struct platform_device lpc32xx_net_device = {
-	.name = "lpc-eth",
-	.id = 0,
-	.dev = {
-		.dma_mask = &lpc32xx_mac_dma_mask,
-		.coherent_dma_mask = 0xffffffffUL,
-	},
-	.num_resources = ARRAY_SIZE(net_resources),
-	.resource = net_resources,
-};
-
-/*
  * Returns the unique ID for the device
  */
 void lpc32xx_get_uid(u32 devid[4])
@@ -398,3 +223,16 @@ void lpc23xx_restart(char mode, const char *cmd)
 	while (1)
 		;
 }
+
+static int __init lpc32xx_display_uid(void)
+{
+	u32 uid[4];
+
+	lpc32xx_get_uid(uid);
+
+	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
+		uid[3], uid[2], uid[1], uid[0]);
+
+	return 1;
+}
+arch_initcall(lpc32xx_display_uid);
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 68e45e8c948..afeac3b1fae 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -23,26 +23,12 @@
 #include <linux/platform_device.h>
 
 /*
- * Arch specific platform device structures
- */
-extern struct platform_device lpc32xx_watchdog_device;
-extern struct platform_device lpc32xx_i2c0_device;
-extern struct platform_device lpc32xx_i2c1_device;
-extern struct platform_device lpc32xx_i2c2_device;
-extern struct platform_device lpc32xx_tsc_device;
-extern struct platform_device lpc32xx_adc_device;
-extern struct platform_device lpc32xx_rtc_device;
-extern struct platform_device lpc32xx_ohci_device;
-extern struct platform_device lpc32xx_net_device;
-
-/*
  * Other arch specific structures and functions
  */
 extern struct sys_timer lpc32xx_timer;
 extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
-extern void __init lpc32xx_gpio_init(void);
 extern void lpc23xx_restart(char, const char *);
 
 
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
deleted file mode 100644
index 034dc9286bc..00000000000
--- a/arch/arm/mach-lpc32xx/include/mach/i2c.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-enum {
-	mstatus_tdi = 0x00000001,
-	mstatus_afi = 0x00000002,
-	mstatus_nai = 0x00000004,
-	mstatus_drmi = 0x00000008,
-	mstatus_active = 0x00000020,
-	mstatus_scl = 0x00000040,
-	mstatus_sda = 0x00000080,
-	mstatus_rff = 0x00000100,
-	mstatus_rfe = 0x00000200,
-	mstatus_tff = 0x00000400,
-	mstatus_tfe = 0x00000800,
-};
-
-enum {
-	mcntrl_tdie = 0x00000001,
-	mcntrl_afie = 0x00000002,
-	mcntrl_naie = 0x00000004,
-	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
-	mcntrl_tffie = 0x00000080,
-	mcntrl_reset = 0x00000100,
-	mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
-	rw_bit = 1 << 0,
-	start_bit = 1 << 8,
-	stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
-#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
-#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
-#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
-#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
-#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
-
-#define I2C_CHIP_NAME		"PNX4008-I2C"
-
-#endif				/* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index d080cb1123d..5b1cc35e6fb 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -22,6 +22,11 @@
 #include <linux/irq.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
 
 #include <mach/irqs.h>
 #include <mach/hardware.h>
@@ -44,6 +49,9 @@
 #define SIC1_ATR_DEFAULT	0x00026000
 #define SIC2_ATR_DEFAULT	0x00000000
 
+static struct irq_domain *lpc32xx_mic_domain;
+static struct device_node *lpc32xx_mic_np;
+
 struct lpc32xx_event_group_regs {
 	void __iomem *enab_reg;
 	void __iomem *edge_reg;
@@ -203,7 +211,7 @@ static void lpc32xx_mask_irq(struct irq_data *d)
 {
 	unsigned int reg, ctrl, mask;
 
-	get_controller(d->irq, &ctrl, &mask);
+	get_controller(d->hwirq, &ctrl, &mask);
 
 	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
 	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
@@ -213,7 +221,7 @@ static void lpc32xx_unmask_irq(struct irq_data *d)
 {
 	unsigned int reg, ctrl, mask;
 
-	get_controller(d->irq, &ctrl, &mask);
+	get_controller(d->hwirq, &ctrl, &mask);
 
 	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
 	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
@@ -223,14 +231,14 @@ static void lpc32xx_ack_irq(struct irq_data *d)
 {
 	unsigned int ctrl, mask;
 
-	get_controller(d->irq, &ctrl, &mask);
+	get_controller(d->hwirq, &ctrl, &mask);
 
 	__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
 
 	/* Also need to clear pending wake event */
-	if (lpc32xx_events[d->irq].mask != 0)
-		__raw_writel(lpc32xx_events[d->irq].mask,
-			lpc32xx_events[d->irq].event_group->rawstat_reg);
+	if (lpc32xx_events[d->hwirq].mask != 0)
+		__raw_writel(lpc32xx_events[d->hwirq].mask,
+			lpc32xx_events[d->hwirq].event_group->rawstat_reg);
 }
 
 static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
@@ -274,22 +282,22 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
 		/* Rising edge sensitive */
-		__lpc32xx_set_irq_type(d->irq, 1, 1);
+		__lpc32xx_set_irq_type(d->hwirq, 1, 1);
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
 		/* Falling edge sensitive */
-		__lpc32xx_set_irq_type(d->irq, 0, 1);
+		__lpc32xx_set_irq_type(d->hwirq, 0, 1);
 		break;
 
 	case IRQ_TYPE_LEVEL_LOW:
 		/* Low level sensitive */
-		__lpc32xx_set_irq_type(d->irq, 0, 0);
+		__lpc32xx_set_irq_type(d->hwirq, 0, 0);
 		break;
 
 	case IRQ_TYPE_LEVEL_HIGH:
 		/* High level sensitive */
-		__lpc32xx_set_irq_type(d->irq, 1, 0);
+		__lpc32xx_set_irq_type(d->hwirq, 1, 0);
 		break;
 
 	/* Other modes are not supported */
@@ -298,7 +306,7 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
 	}
 
 	/* Ok to use the level handler for all types */
-	irq_set_handler(d->irq, handle_level_irq);
+	irq_set_handler(d->hwirq, handle_level_irq);
 
 	return 0;
 }
@@ -307,33 +315,33 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 {
 	unsigned long eventreg;
 
-	if (lpc32xx_events[d->irq].mask != 0) {
-		eventreg = __raw_readl(lpc32xx_events[d->irq].
+	if (lpc32xx_events[d->hwirq].mask != 0) {
+		eventreg = __raw_readl(lpc32xx_events[d->hwirq].
 			event_group->enab_reg);
 
 		if (state)
-			eventreg |= lpc32xx_events[d->irq].mask;
+			eventreg |= lpc32xx_events[d->hwirq].mask;
 		else {
-			eventreg &= ~lpc32xx_events[d->irq].mask;
+			eventreg &= ~lpc32xx_events[d->hwirq].mask;
 
 			/*
 			 * When disabling the wakeup, clear the latched
 			 * event
 			 */
-			__raw_writel(lpc32xx_events[d->irq].mask,
-				lpc32xx_events[d->irq].
+			__raw_writel(lpc32xx_events[d->hwirq].mask,
+				lpc32xx_events[d->hwirq].
 				event_group->rawstat_reg);
 		}
 
 		__raw_writel(eventreg,
-			lpc32xx_events[d->irq].event_group->enab_reg);
+			lpc32xx_events[d->hwirq].event_group->enab_reg);
 
 		return 0;
 	}
 
 	/* Clear event */
-	__raw_writel(lpc32xx_events[d->irq].mask,
-		lpc32xx_events[d->irq].event_group->rawstat_reg);
+	__raw_writel(lpc32xx_events[d->hwirq].mask,
+		lpc32xx_events[d->hwirq].event_group->rawstat_reg);
 
 	return -ENODEV;
 }
@@ -353,6 +361,7 @@ static void __init lpc32xx_set_default_mappings(unsigned int apr,
 }
 
 static struct irq_chip lpc32xx_irq_chip = {
+	.name = "MIC",
 	.irq_ack = lpc32xx_ack_irq,
 	.irq_mask = lpc32xx_mask_irq,
 	.irq_unmask = lpc32xx_unmask_irq,
@@ -386,9 +395,23 @@ static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
 	}
 }
 
+static int __init __lpc32xx_mic_of_init(struct device_node *node,
+					struct device_node *parent)
+{
+	lpc32xx_mic_np = node;
+
+	return 0;
+}
+
+static const struct of_device_id mic_of_match[] __initconst = {
+	{ .compatible = "nxp,lpc3220-mic", .data = __lpc32xx_mic_of_init },
+	{ }
+};
+
 void __init lpc32xx_init_irq(void)
 {
 	unsigned int i;
+	int irq_base;
 
 	/* Setup MIC */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
@@ -448,4 +471,19 @@ void __init lpc32xx_init_irq(void)
 		LPC32XX_CLKPWR_PIN_RS);
 	__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
 		LPC32XX_CLKPWR_INT_RS);
+
+	of_irq_init(mic_of_match);
+
+	irq_base = irq_alloc_descs(-1, 0, NR_IRQS, 0);
+	if (irq_base < 0) {
+		pr_warn("Cannot allocate irq_descs, assuming pre-allocated\n");
+		irq_base = 0;
+	}
+
+	lpc32xx_mic_domain = irq_domain_add_legacy(lpc32xx_mic_np, NR_IRQS,
+						   irq_base, 0,
+						   &irq_domain_simple_ops,
+						   NULL);
+	if (!lpc32xx_mic_domain)
+		panic("Unable to add MIC irq domain\n");
 }
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7f7401ec748..540106cdb9e 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -1,8 +1,9 @@
 /*
- * arch/arm/mach-lpc32xx/phy3250.c
+ * Platform support for LPC32xx SoC
  *
  * Author: Kevin Wells <kevin.wells@nxp.com>
  *
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
  * Copyright (C) 2010 NXP Semiconductors
  *
  * This program is free software; you can redistribute it and/or modify
@@ -25,11 +26,16 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
-#include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl022.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/amba/pl08x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -47,7 +53,6 @@
 #define SPI0_CS_GPIO	LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
 #define LCD_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
 #define BKL_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define LED_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
 
 /*
  * AMBA LCD controller
@@ -150,9 +155,6 @@ static struct clcd_board lpc32xx_clcd_data = {
 	.remove		= lpc32xx_clcd_remove,
 };
 
-static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
-	LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
-
 /*
  * AMBA SSP (SPI)
  */
@@ -180,8 +182,11 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
 	.enable_dma		= 0,
 };
 
-static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
-	LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
+static struct pl022_ssp_controller lpc32xx_ssp1_data = {
+	.bus_id			= 1,
+	.num_chipselect		= 1,
+	.enable_dma		= 0,
+};
 
 /* AT25 driver registration */
 static int __init phy3250_spi_board_register(void)
@@ -221,73 +226,20 @@ static int __init phy3250_spi_board_register(void)
 }
 arch_initcall(phy3250_spi_board_register);
 
-static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led phy_leds[] = {
-	{
-		.name			= "led0",
-		.gpio			= LED_GPIO,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-};
-
-static struct gpio_led_platform_data led_data = {
-	.leds = phy_leds,
-	.num_leds = ARRAY_SIZE(phy_leds),
-};
-
-static struct platform_device lpc32xx_gpio_led_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &led_data,
+static struct pl08x_platform_data pl08x_pd = {
 };
 
-static struct platform_device *phy3250_devs[] __initdata = {
-	&lpc32xx_rtc_device,
-	&lpc32xx_tsc_device,
-	&lpc32xx_i2c0_device,
-	&lpc32xx_i2c1_device,
-	&lpc32xx_i2c2_device,
-	&lpc32xx_watchdog_device,
-	&lpc32xx_gpio_led_device,
-	&lpc32xx_adc_device,
-	&lpc32xx_ohci_device,
-	&lpc32xx_net_device,
+static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", &lpc32xx_ssp0_data),
+	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", &lpc32xx_ssp1_data),
+	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
+	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
+	{ }
 };
 
-static struct amba_device *amba_devs[] __initdata = {
-	&lpc32xx_clcd_device,
-	&lpc32xx_ssp0_device,
-};
-
-/*
- * Board specific functions
- */
-static void __init phy3250_board_init(void)
+static void __init lpc3250_machine_init(void)
 {
 	u32 tmp;
-	int i;
-
-	lpc32xx_gpio_init();
-
-	/* Register GPIOs used on this board */
-	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			SPI0_CS_GPIO);
-	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			SPI0_CS_GPIO);
-
-	/* Setup network interface for RMII mode */
-	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
-	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
-	tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
-	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
 
 	/* Setup SLC NAND controller muxing */
 	__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
@@ -300,6 +252,12 @@ static void __init phy3250_board_init(void)
 	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
 	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
 
+	/* Set up USB power */
+	tmp = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	tmp |= LPC32XX_CLKPWR_USBCTRL_HCLK_EN |
+		LPC32XX_CLKPWR_USBCTRL_USBI2C_EN;
+	__raw_writel(tmp, LPC32XX_CLKPWR_USB_CTRL);
+
 	/* Set up I2C pull levels */
 	tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
 	tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
@@ -321,54 +279,51 @@ static void __init phy3250_board_init(void)
 	/*
 	 * AMBA peripheral clocks need to be enabled prior to AMBA device
 	 * detection or a data fault will occur, so enable the clocks
-	 * here. However, we don't want to enable them if the peripheral
-	 * isn't included in the image
+	 * here.
 	 */
-#ifdef CONFIG_FB_ARMCLCD
 	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
 	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
 		LPC32XX_CLKPWR_LCDCLK_CTRL);
-#endif
-#ifdef CONFIG_SPI_PL022
+
 	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
 	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
 		LPC32XX_CLKPWR_SSP_CLK_CTRL);
-#endif
 
-	platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
+	tmp = __raw_readl(LPC32XX_CLKPWR_DMA_CLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN),
+		     LPC32XX_CLKPWR_DMA_CLK_CTRL);
 
 	/* Test clock needed for UDA1380 initial init */
 	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
 		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
 		LPC32XX_CLKPWR_TEST_CLK_SEL);
 
-	i2c_register_board_info(0, phy3250_i2c_board_info,
-		ARRAY_SIZE(phy3250_i2c_board_info));
-}
-
-static int __init lpc32xx_display_uid(void)
-{
-	u32 uid[4];
-
-	lpc32xx_get_uid(uid);
-
-	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
-		uid[3], uid[2], uid[1], uid[0]);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     lpc32xx_auxdata_lookup, NULL);
 
-	return 1;
+	/* Register GPIOs used on this board */
+	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			SPI0_CS_GPIO);
+	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			SPI0_CS_GPIO);
 }
-arch_initcall(lpc32xx_display_uid);
 
-MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
-	/* Maintainer: Kevin Wells, NXP Semiconductors */
+static char const *lpc32xx_dt_compat[] __initdata = {
+	"nxp,lpc3220",
+	"nxp,lpc3230",
+	"nxp,lpc3240",
+	"nxp,lpc3250",
+	NULL
+};
+
+DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
 	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
 	.timer		= &lpc32xx_timer,
-	.init_machine	= phy3250_board_init,
+	.init_machine	= lpc3250_machine_init,
+	.dt_compat	= lpc32xx_dt_compat,
 	.restart	= lpc23xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 5a90b9a3ab6..ede72162815 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -2,16 +2,6 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implmentations"
 
-config MACH_MMP_DT
-	bool "Support MMP2 platforms from device tree"
-	select CPU_PXA168
-	select CPU_PXA910
-	select USE_OF
-	help
-	  Include support for Marvell MMP2 based platforms using
-	  the device tree. Needn't select any other machine while
-	  MACH_MMP_DT is enabled.
-
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
 	select CPU_PXA168
@@ -94,6 +84,25 @@ config MACH_GPLUGD
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  GuruPlug Display (gplugD) Board
 
+config MACH_MMP_DT
+	bool "Support MMP (ARMv5) platforms from device tree"
+	select CPU_PXA168
+	select CPU_PXA910
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_MMP_DT is enabled.
+
+config MACH_MMP2_DT
+	bool "Support MMP2 (ARMv7) platforms from device tree"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree.
+
 endmenu
 
 config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 4fc0ff5dc96..b920b9bfbdb 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,12 +2,12 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y				+= common.o clock.o devices.o time.o
+obj-y				+= common.o clock.o devices.o time.o irq.o
 
 # SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o sram.o
+obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
+obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
+obj-$(CONFIG_CPU_MMP2)		+= mmp2.o sram.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
@@ -19,5 +19,6 @@ obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
+obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
 obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index 9cff9e7a2b2..bd152e24e6d 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -6,13 +6,15 @@
  * published by the Free Software Foundation.
  */
 
+#include <asm/irq.h>
 #include <mach/regs-icu.h>
 
 	.macro	get_irqnr_preamble, base, tmp
 	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
 	and	\tmp, \tmp, #0xff00
 	cmp	\tmp, #0x5800
-	ldr	\base, =ICU_VIRT_BASE
+	ldr	\base, =mmp_icu_base
+	ldr	\base, [\base, #0]
 	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
 	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
 	.endm
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index d0e746626a3..fb492a50a81 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -125,7 +125,7 @@
 #define IRQ_MMP2_RTC_MUX		5
 #define IRQ_MMP2_TWSI1			7
 #define IRQ_MMP2_GPU			8
-#define IRQ_MMP2_KEYPAD			9
+#define IRQ_MMP2_KEYPAD_MUX		9
 #define IRQ_MMP2_ROTARY			10
 #define IRQ_MMP2_TRACKBALL		11
 #define IRQ_MMP2_ONEWIRE		12
@@ -163,11 +163,11 @@
 #define IRQ_MMP2_DMA_FIQ		47
 #define IRQ_MMP2_DMA_RIQ		48
 #define IRQ_MMP2_GPIO			49
-#define IRQ_MMP2_SSP_MUX		51
+#define IRQ_MMP2_MIPI_HSI1_MUX		51
 #define IRQ_MMP2_MMC2			52
 #define IRQ_MMP2_MMC3			53
 #define IRQ_MMP2_MMC4			54
-#define IRQ_MMP2_MIPI_HSI		55
+#define IRQ_MMP2_MIPI_HSI0_MUX		55
 #define IRQ_MMP2_MSP			58
 #define IRQ_MMP2_MIPI_SLIM_DMA		59
 #define IRQ_MMP2_PJ4_FREQ_CHG		60
@@ -186,8 +186,14 @@
 #define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
 #define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
 
+/* secondary interrupt of INT #9 */
+#define IRQ_MMP2_KEYPAD_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_KPC			(IRQ_MMP2_KEYPAD_BASE + 0)
+#define IRQ_MMP2_ROTORY			(IRQ_MMP2_KEYPAD_BASE + 1)
+#define IRQ_MMP2_TBALL			(IRQ_MMP2_KEYPAD_BASE + 2)
+
 /* secondary interrupt of INT #17 */
-#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_KEYPAD_BASE + 3)
 #define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
 #define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
 #define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
@@ -212,11 +218,16 @@
 #define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
 
 /* secondary interrupt of INT #51 */
-#define IRQ_MMP2_SSP_BASE		(IRQ_MMP2_MISC_BASE + 15)
-#define IRQ_MMP2_SSP1_SRDY		(IRQ_MMP2_SSP_BASE + 0)
-#define IRQ_MMP2_SSP3_SRDY		(IRQ_MMP2_SSP_BASE + 1)
+#define IRQ_MMP2_MIPI_HSI1_BASE		(IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_HSI1_CAWAKE		(IRQ_MMP2_MIPI_HSI1_BASE + 0)
+#define IRQ_MMP2_MIPI_HSI_INT1		(IRQ_MMP2_MIPI_HSI1_BASE + 1)
+
+/* secondary interrupt of INT #55 */
+#define IRQ_MMP2_MIPI_HSI0_BASE		(IRQ_MMP2_MIPI_HSI1_BASE + 2)
+#define IRQ_MMP2_HSI0_CAWAKE		(IRQ_MMP2_MIPI_HSI0_BASE + 0)
+#define IRQ_MMP2_MIPI_HSI_INT0		(IRQ_MMP2_MIPI_HSI0_BASE + 1)
 
-#define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
+#define IRQ_MMP2_MUX_END		(IRQ_MMP2_MIPI_HSI0_BASE + 2)
 
 #define IRQ_GPIO_START			128
 #define MMP_NR_BUILTIN_GPIO		192
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
deleted file mode 100644
index 7895d277421..00000000000
--- a/arch/arm/mach-mmp/irq-mmp2.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq-mmp2.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/irqs.h>
-#include <mach/regs-icu.h>
-#include <mach/mmp2.h>
-
-#include "common.h"
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r &= ~ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r |= ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_mask	= icu_mask_irq,
-	.irq_mask_ack	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-static void pmic_irq_ack(struct irq_data *d)
-{
-	if (d->irq == IRQ_MMP2_PMIC)
-		mmp2_clear_pmic_int();
-}
-
-#define SECOND_IRQ_MASK(_name_, irq_base, prefix)			\
-static void _name_##_mask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) | (1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)			\
-static void _name_##_unmask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) & ~(1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)			\
-static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc)	\
-{									\
-	unsigned long status, mask, n;					\
-	mask = __raw_readl(prefix##_MASK);				\
-	while (1) {							\
-		status = __raw_readl(prefix##_STATUS) & ~mask;		\
-		if (status == 0)					\
-			break;						\
-		n = find_first_bit(&status, BITS_PER_LONG);		\
-		while (n < BITS_PER_LONG) {				\
-			generic_handle_irq(irq_base + n);		\
-			n = find_next_bit(&status, BITS_PER_LONG, n+1);	\
-		}							\
-	}								\
-}
-
-#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)			\
-SECOND_IRQ_MASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_UNMASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_DEMUX(_name_, irq_base, prefix)				\
-static struct irq_chip _name_##_irq_chip = {				\
-	.name		= #_name_,					\
-	.irq_mask	= _name_##_mask_irq,				\
-	.irq_unmask	= _name_##_unmask_irq,				\
-}
-
-SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
-SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
-SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
-SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
-SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
-
-static void init_mux_irq(struct irq_chip *chip, int start, int num)
-{
-	int irq;
-
-	for (irq = start; num > 0; irq++, num--) {
-		struct irq_data *d = irq_get_irq_data(irq);
-
-		/* mask and clear the IRQ */
-		chip->irq_mask(d);
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		irq_set_chip(irq, chip);
-		set_irq_flags(irq, IRQF_VALID);
-		irq_set_handler(irq, handle_level_irq);
-	}
-}
-
-void __init mmp2_init_icu(void)
-{
-	int irq;
-
-	for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip(irq, &icu_irq_chip);
-		set_irq_flags(irq, IRQF_VALID);
-
-		switch (irq) {
-		case IRQ_MMP2_PMIC_MUX:
-		case IRQ_MMP2_RTC_MUX:
-		case IRQ_MMP2_TWSI_MUX:
-		case IRQ_MMP2_MISC_MUX:
-		case IRQ_MMP2_SSP_MUX:
-			break;
-		default:
-			irq_set_handler(irq, handle_level_irq);
-			break;
-		}
-	}
-
-	/* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
-	 * to be written to clear the interrupt
-	 */
-	pmic_irq_chip.irq_ack = pmic_irq_ack;
-
-	init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
-	init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
-	init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
-	init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
-	init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
-
-	irq_set_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
-}
diff --git a/arch/arm/mach-mmp/irq-pxa168.c b/arch/arm/mach-mmp/irq-pxa168.c
deleted file mode 100644
index 89706a0d08f..00000000000
--- a/arch/arm/mach-mmp/irq-pxa168.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Bin Yang <bin.yang@marvell.com>
- *  Created:	Sep 30, 2008
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/regs-icu.h>
-
-#include "common.h"
-
-#define IRQ_ROUTE_TO_AP		(ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
-
-#define PRIORITY_DEFAULT	0x1
-#define PRIORITY_NONE		0x0	/* means IRQ disabled */
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	__raw_writel(PRIORITY_NONE, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_ack	= icu_mask_irq,
-	.irq_mask	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-void __init icu_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < 64; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c
new file mode 100644
index 00000000000..3705470c9f1
--- /dev/null
+++ b/arch/arm/mach-mmp/irq.c
@@ -0,0 +1,445 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *  Copyright (C) 2008 - 2012 Marvell Technology Group Ltd.
+ *
+ *  Author:	Bin Yang <bin.yang@marvell.com>
+ *              Haojian Zhuang <haojian.zhuang@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <mach/irqs.h>
+
+#include "common.h"
+
+#define MAX_ICU_NR		16
+
+struct icu_chip_data {
+	int			nr_irqs;
+	unsigned int		virq_base;
+	unsigned int		cascade_irq;
+	void __iomem		*reg_status;
+	void __iomem		*reg_mask;
+	unsigned int		conf_enable;
+	unsigned int		conf_disable;
+	unsigned int		conf_mask;
+	unsigned int		clr_mfp_irq_base;
+	unsigned int		clr_mfp_hwirq;
+	struct irq_domain	*domain;
+};
+
+struct mmp_intc_conf {
+	unsigned int	conf_enable;
+	unsigned int	conf_disable;
+	unsigned int	conf_mask;
+};
+
+void __iomem *mmp_icu_base;
+static struct icu_chip_data icu_data[MAX_ICU_NR];
+static int max_icu_nr;
+
+extern void mmp2_clear_pmic_int(void);
+
+static void icu_mask_ack_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_disable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+#ifdef CONFIG_CPU_MMP2
+		if ((data->virq_base == data->clr_mfp_irq_base)
+			&& (hwirq == data->clr_mfp_hwirq))
+			mmp2_clear_pmic_int();
+#endif
+		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static void icu_mask_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_disable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+		r = readl_relaxed(data->reg_mask) | (1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static void icu_unmask_irq(struct irq_data *d)
+{
+	struct irq_domain *domain = d->domain;
+	struct icu_chip_data *data = (struct icu_chip_data *)domain->host_data;
+	int hwirq;
+	u32 r;
+
+	hwirq = d->irq - data->virq_base;
+	if (data == &icu_data[0]) {
+		r = readl_relaxed(mmp_icu_base + (hwirq << 2));
+		r &= ~data->conf_mask;
+		r |= data->conf_enable;
+		writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+	} else {
+		r = readl_relaxed(data->reg_mask) & ~(1 << hwirq);
+		writel_relaxed(r, data->reg_mask);
+	}
+}
+
+static struct irq_chip icu_irq_chip = {
+	.name		= "icu_irq",
+	.irq_mask	= icu_mask_irq,
+	.irq_mask_ack	= icu_mask_ack_irq,
+	.irq_unmask	= icu_unmask_irq,
+};
+
+static void icu_mux_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_domain *domain;
+	struct icu_chip_data *data;
+	int i;
+	unsigned long mask, status, n;
+
+	for (i = 1; i < max_icu_nr; i++) {
+		if (irq == icu_data[i].cascade_irq) {
+			domain = icu_data[i].domain;
+			data = (struct icu_chip_data *)domain->host_data;
+			break;
+		}
+	}
+	if (i >= max_icu_nr) {
+		pr_err("Spurious irq %d in MMP INTC\n", irq);
+		return;
+	}
+
+	mask = readl_relaxed(data->reg_mask);
+	while (1) {
+		status = readl_relaxed(data->reg_status) & ~mask;
+		if (status == 0)
+			break;
+		n = find_first_bit(&status, BITS_PER_LONG);
+		while (n < BITS_PER_LONG) {
+			generic_handle_irq(icu_data[i].virq_base + n);
+			n = find_next_bit(&status, BITS_PER_LONG, n + 1);
+		}
+	}
+}
+
+static int mmp_irq_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
+	set_irq_flags(irq, IRQF_VALID);
+	return 0;
+}
+
+static int mmp_irq_domain_xlate(struct irq_domain *d, struct device_node *node,
+				const u32 *intspec, unsigned int intsize,
+				unsigned long *out_hwirq,
+				unsigned int *out_type)
+{
+	*out_hwirq = intspec[0];
+	return 0;
+}
+
+const struct irq_domain_ops mmp_irq_domain_ops = {
+	.map		= mmp_irq_domain_map,
+	.xlate		= mmp_irq_domain_xlate,
+};
+
+static struct mmp_intc_conf mmp_conf = {
+	.conf_enable	= 0x51,
+	.conf_disable	= 0x0,
+	.conf_mask	= 0x7f,
+};
+
+static struct mmp_intc_conf mmp2_conf = {
+	.conf_enable	= 0x20,
+	.conf_disable	= 0x0,
+	.conf_mask	= 0x7f,
+};
+
+/* MMP (ARMv5) */
+void __init icu_init_irq(void)
+{
+	int irq;
+
+	max_icu_nr = 1;
+	mmp_icu_base = ioremap(0xd4282000, 0x1000);
+	icu_data[0].conf_enable = mmp_conf.conf_enable;
+	icu_data[0].conf_disable = mmp_conf.conf_disable;
+	icu_data[0].conf_mask = mmp_conf.conf_mask;
+	icu_data[0].nr_irqs = 64;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[0]);
+	for (irq = 0; irq < 64; irq++) {
+		icu_mask_irq(irq_get_irq_data(irq));
+		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	irq_set_default_host(icu_data[0].domain);
+}
+
+/* MMP2 (ARMv7) */
+void __init mmp2_init_icu(void)
+{
+	int irq;
+
+	max_icu_nr = 8;
+	mmp_icu_base = ioremap(0xd4282000, 0x1000);
+	icu_data[0].conf_enable = mmp2_conf.conf_enable;
+	icu_data[0].conf_disable = mmp2_conf.conf_disable;
+	icu_data[0].conf_mask = mmp2_conf.conf_mask;
+	icu_data[0].nr_irqs = 64;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(NULL, 64, 0, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[0]);
+	icu_data[1].reg_status = mmp_icu_base + 0x150;
+	icu_data[1].reg_mask = mmp_icu_base + 0x168;
+	icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
+	icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
+	icu_data[1].nr_irqs = 2;
+	icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
+	icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
+						   icu_data[1].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[1]);
+	icu_data[2].reg_status = mmp_icu_base + 0x154;
+	icu_data[2].reg_mask = mmp_icu_base + 0x16c;
+	icu_data[2].nr_irqs = 2;
+	icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
+	icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
+						   icu_data[2].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[2]);
+	icu_data[3].reg_status = mmp_icu_base + 0x180;
+	icu_data[3].reg_mask = mmp_icu_base + 0x17c;
+	icu_data[3].nr_irqs = 3;
+	icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
+	icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
+						   icu_data[3].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[3]);
+	icu_data[4].reg_status = mmp_icu_base + 0x158;
+	icu_data[4].reg_mask = mmp_icu_base + 0x170;
+	icu_data[4].nr_irqs = 5;
+	icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
+	icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
+						   icu_data[4].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[4]);
+	icu_data[5].reg_status = mmp_icu_base + 0x15c;
+	icu_data[5].reg_mask = mmp_icu_base + 0x174;
+	icu_data[5].nr_irqs = 15;
+	icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
+	icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
+						   icu_data[5].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[5]);
+	icu_data[6].reg_status = mmp_icu_base + 0x160;
+	icu_data[6].reg_mask = mmp_icu_base + 0x178;
+	icu_data[6].nr_irqs = 2;
+	icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
+	icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
+						   icu_data[6].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[6]);
+	icu_data[7].reg_status = mmp_icu_base + 0x188;
+	icu_data[7].reg_mask = mmp_icu_base + 0x184;
+	icu_data[7].nr_irqs = 2;
+	icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
+	icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
+						   icu_data[7].virq_base, 0,
+						   &irq_domain_simple_ops,
+						   &icu_data[7]);
+	for (irq = 0; irq < IRQ_MMP2_MUX_END; irq++) {
+		icu_mask_irq(irq_get_irq_data(irq));
+		switch (irq) {
+		case IRQ_MMP2_PMIC_MUX:
+		case IRQ_MMP2_RTC_MUX:
+		case IRQ_MMP2_KEYPAD_MUX:
+		case IRQ_MMP2_TWSI_MUX:
+		case IRQ_MMP2_MISC_MUX:
+		case IRQ_MMP2_MIPI_HSI1_MUX:
+		case IRQ_MMP2_MIPI_HSI0_MUX:
+			irq_set_chip(irq, &icu_irq_chip);
+			irq_set_chained_handler(irq, icu_mux_irq_demux);
+			break;
+		default:
+			irq_set_chip_and_handler(irq, &icu_irq_chip,
+						 handle_level_irq);
+			break;
+		}
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	irq_set_default_host(icu_data[0].domain);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id intc_ids[] __initconst = {
+	{ .compatible = "mrvl,mmp-intc", .data = &mmp_conf },
+	{ .compatible = "mrvl,mmp2-intc", .data = &mmp2_conf },
+	{}
+};
+
+static const struct of_device_id mmp_mux_irq_match[] __initconst = {
+	{ .compatible = "mrvl,mmp2-mux-intc" },
+	{}
+};
+
+int __init mmp2_mux_init(struct device_node *parent)
+{
+	struct device_node *node;
+	const struct of_device_id *of_id;
+	struct resource res;
+	int i, irq_base, ret, irq;
+	u32 nr_irqs, mfp_irq;
+
+	node = parent;
+	max_icu_nr = 1;
+	for (i = 1; i < MAX_ICU_NR; i++) {
+		node = of_find_matching_node(node, mmp_mux_irq_match);
+		if (!node)
+			break;
+		of_id = of_match_node(&mmp_mux_irq_match[0], node);
+		ret = of_property_read_u32(node, "mrvl,intc-nr-irqs",
+					   &nr_irqs);
+		if (ret) {
+			pr_err("Not found mrvl,intc-nr-irqs property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		ret = of_address_to_resource(node, 0, &res);
+		if (ret < 0) {
+			pr_err("Not found reg property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		icu_data[i].reg_status = mmp_icu_base + res.start;
+		ret = of_address_to_resource(node, 1, &res);
+		if (ret < 0) {
+			pr_err("Not found reg property\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		icu_data[i].reg_mask = mmp_icu_base + res.start;
+		icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0);
+		if (!icu_data[i].cascade_irq) {
+			ret = -EINVAL;
+			goto err;
+		}
+
+		irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+		if (irq_base < 0) {
+			pr_err("Failed to allocate IRQ numbers for mux intc\n");
+			ret = irq_base;
+			goto err;
+		}
+		if (!of_property_read_u32(node, "mrvl,clr-mfp-irq",
+					  &mfp_irq)) {
+			icu_data[i].clr_mfp_irq_base = irq_base;
+			icu_data[i].clr_mfp_hwirq = mfp_irq;
+		}
+		irq_set_chained_handler(icu_data[i].cascade_irq,
+					icu_mux_irq_demux);
+		icu_data[i].nr_irqs = nr_irqs;
+		icu_data[i].virq_base = irq_base;
+		icu_data[i].domain = irq_domain_add_legacy(node, nr_irqs,
+							   irq_base, 0,
+							   &mmp_irq_domain_ops,
+							   &icu_data[i]);
+		for (irq = irq_base; irq < irq_base + nr_irqs; irq++)
+			icu_mask_irq(irq_get_irq_data(irq));
+	}
+	max_icu_nr = i;
+	return 0;
+err:
+	of_node_put(node);
+	max_icu_nr = i;
+	return ret;
+}
+
+void __init mmp_dt_irq_init(void)
+{
+	struct device_node *node;
+	const struct of_device_id *of_id;
+	struct mmp_intc_conf *conf;
+	int nr_irqs, irq_base, ret, irq;
+
+	node = of_find_matching_node(NULL, intc_ids);
+	if (!node) {
+		pr_err("Failed to find interrupt controller in arch-mmp\n");
+		return;
+	}
+	of_id = of_match_node(intc_ids, node);
+	conf = of_id->data;
+
+	ret = of_property_read_u32(node, "mrvl,intc-nr-irqs", &nr_irqs);
+	if (ret) {
+		pr_err("Not found mrvl,intc-nr-irqs property\n");
+		return;
+	}
+
+	mmp_icu_base = of_iomap(node, 0);
+	if (!mmp_icu_base) {
+		pr_err("Failed to get interrupt controller register\n");
+		return;
+	}
+
+	irq_base = irq_alloc_descs(-1, 0, nr_irqs - NR_IRQS_LEGACY, 0);
+	if (irq_base < 0) {
+		pr_err("Failed to allocate IRQ numbers\n");
+		goto err;
+	} else if (irq_base != NR_IRQS_LEGACY) {
+		pr_err("ICU's irqbase should be started from 0\n");
+		goto err;
+	}
+	icu_data[0].conf_enable = conf->conf_enable;
+	icu_data[0].conf_disable = conf->conf_disable;
+	icu_data[0].conf_mask = conf->conf_mask;
+	icu_data[0].nr_irqs = nr_irqs;
+	icu_data[0].virq_base = 0;
+	icu_data[0].domain = irq_domain_add_legacy(node, nr_irqs, 0, 0,
+						   &mmp_irq_domain_ops,
+						   &icu_data[0]);
+	irq_set_default_host(icu_data[0].domain);
+	for (irq = 0; irq < nr_irqs; irq++)
+		icu_mask_irq(irq_get_irq_data(irq));
+	mmp2_mux_init(node);
+	return;
+err:
+	iounmap(mmp_icu_base);
+}
+#endif
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index 67075395e40..033cc31b3c7 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -14,14 +14,19 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
 #include <mach/irqs.h>
 
 #include "common.h"
 
-extern struct sys_timer pxa168_timer;
-extern void __init icu_init_irq(void);
+extern void __init mmp_dt_irq_init(void);
+extern void __init mmp_dt_init_timer(void);
 
-static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
+static struct sys_timer mmp_dt_timer = {
+	.init	= mmp_dt_init_timer,
+};
+
+static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
 	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
@@ -32,44 +37,47 @@ static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
 	{}
 };
 
-static int __init mmp_intc_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, 0);
-	return 0;
-}
-
-static int __init mmp_gpio_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, IRQ_GPIO_START);
-	return 0;
-}
-
-static const struct of_device_id mmp_irq_match[] __initconst = {
-	{ .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, },
-	{ .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, },
+static const struct of_dev_auxdata pxa910_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4036000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4037000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
 	{}
 };
 
-static void __init mmp_dt_init(void)
+static void __init pxa168_dt_init(void)
 {
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     pxa168_auxdata_lookup, NULL);
+}
 
-	of_irq_init(mmp_irq_match);
-
+static void __init pxa910_dt_init(void)
+{
 	of_platform_populate(NULL, of_default_bus_match_table,
-			     mmp_auxdata_lookup, NULL);
+			     pxa910_auxdata_lookup, NULL);
 }
 
-static const char *pxa168_dt_board_compat[] __initdata = {
+static const char *mmp_dt_board_compat[] __initdata = {
 	"mrvl,pxa168-aspenite",
+	"mrvl,pxa910-dkb",
 	NULL,
 };
 
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
 	.map_io		= mmp_map_io,
-	.init_irq	= icu_init_irq,
-	.timer		= &pxa168_timer,
-	.init_machine	= mmp_dt_init,
-	.dt_compat	= pxa168_dt_board_compat,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= pxa168_dt_init,
+	.dt_compat	= mmp_dt_board_compat,
+MACHINE_END
+
+DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= pxa910_dt_init,
+	.dt_compat	= mmp_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
new file mode 100644
index 00000000000..535a5ed5977
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -0,0 +1,60 @@
+/*
+ *  linux/arch/arm/mach-mmp/mmp2-dt.c
+ *
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/regs-apbc.h>
+
+#include "common.h"
+
+extern void __init mmp_dt_irq_init(void);
+extern void __init mmp_dt_init_timer(void);
+
+static struct sys_timer mmp_dt_timer = {
+	.init	= mmp_dt_init_timer,
+};
+
+static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4016000, "pxa2xx-uart.3", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+	{}
+};
+
+static void __init mmp2_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     mmp2_auxdata_lookup, NULL);
+}
+
+static const char *mmp2_dt_board_compat[] __initdata = {
+	"mrvl,mmp2-brownstone",
+	NULL,
+};
+
+DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= mmp_dt_irq_init,
+	.timer		= &mmp_dt_timer,
+	.init_machine	= mmp2_dt_init,
+	.dt_compat	= mmp2_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 71fc4ee4602..936447c7097 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -25,6 +25,9 @@
 
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/sched_clock.h>
 #include <mach/addr-map.h>
@@ -41,6 +44,8 @@
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
+static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
+
 /*
  * FIXME: the timer needs some delay to stablize the counter capture
  */
@@ -48,12 +53,12 @@ static inline uint32_t timer_read(void)
 {
 	int delay = 100;
 
-	__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
+	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
 		cpu_relax();
 
-	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
+	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
 }
 
 static u32 notrace mmp_read_sched_clock(void)
@@ -68,12 +73,12 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	/*
 	 * Clear pending interrupt status.
 	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
 
 	/*
 	 * Disable timer 0.
 	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
 
 	c->event_handler(c);
 
@@ -90,23 +95,23 @@ static int timer_set_next_event(unsigned long delta,
 	/*
 	 * Disable timer 0.
 	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x02, mmp_timer_base + TMR_CER);
 
 	/*
 	 * Clear and enable timer match 0 interrupt.
 	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_ICR(0));
+	__raw_writel(0x01, mmp_timer_base + TMR_IER(0));
 
 	/*
 	 * Setup new clockevent timer value.
 	 */
-	__raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
+	__raw_writel(delta - 1, mmp_timer_base + TMR_TN_MM(0, 0));
 
 	/*
 	 * Enable timer 0.
 	 */
-	__raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x03, mmp_timer_base + TMR_CER);
 
 	local_irq_restore(flags);
 
@@ -124,7 +129,7 @@ static void timer_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		/* disable the matching interrupt */
-		__raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
+		__raw_writel(0x00, mmp_timer_base + TMR_IER(0));
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -157,27 +162,27 @@ static struct clocksource cksrc = {
 
 static void __init timer_config(void)
 {
-	uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
+	uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
 
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
+	__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
 
 	ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
 		(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
-	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
+	__raw_writel(ccr, mmp_timer_base + TMR_CCR);
 
 	/* set timer 0 to periodic mode, and timer 1 to free-running mode */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
+	__raw_writel(0x2, mmp_timer_base + TMR_CMR);
 
-	__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
+	__raw_writel(0x1, mmp_timer_base + TMR_PLCR(0)); /* periodic */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(0));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(0));
 
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
+	__raw_writel(0x0, mmp_timer_base + TMR_PLCR(1)); /* free-running */
+	__raw_writel(0x7, mmp_timer_base + TMR_ICR(1));  /* clear status */
+	__raw_writel(0x0, mmp_timer_base + TMR_IER(1));
 
 	/* enable timer 1 counter */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
+	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
 static struct irqaction timer_irq = {
@@ -203,3 +208,37 @@ void __init timer_init(int irq)
 	clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
 	clockevents_register_device(&ckevt);
 }
+
+#ifdef CONFIG_OF
+static struct of_device_id mmp_timer_dt_ids[] = {
+	{ .compatible = "mrvl,mmp-timer", },
+	{}
+};
+
+void __init mmp_dt_init_timer(void)
+{
+	struct device_node *np;
+	int irq, ret;
+
+	np = of_find_matching_node(NULL, mmp_timer_dt_ids);
+	if (!np) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		ret = -EINVAL;
+		goto out;
+	}
+	mmp_timer_base = of_iomap(np, 0);
+	if (!mmp_timer_base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	timer_init(irq);
+	return;
+out:
+	pr_err("Failed to get timer from device tree with error:%d\n", ret);
+}
+#endif
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 098d183a008..7302ba7ff1b 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,7 +15,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
-#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
 #include <asm/hardware/gic.h>
@@ -95,22 +94,6 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-};
-
-static void __init omap3_i2c_init(void)
-{
-	omap3_pmic_init("twl4030", &beagle_twldata);
-}
-
-static void __init omap3_init(void)
-{
-	omap3_i2c_init();
-	omap_generic_init();
-}
-
 static const char *omap3_boards_compat[] __initdata = {
 	"ti,omap3",
 	NULL,
@@ -122,7 +105,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap_init_irq,
 	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_init,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap3_timer,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap_prcm_restart,
@@ -130,22 +113,6 @@ MACHINE_END
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-};
-
-static void __init omap4_i2c_init(void)
-{
-	omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
-}
-
-static void __init omap4_init(void)
-{
-	omap4_i2c_init();
-	omap_generic_init();
-}
-
 static const char *omap4_boards_compat[] __initdata = {
 	"ti,omap4",
 	NULL,
@@ -157,7 +124,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
 	.init_early	= omap4430_init_early,
 	.init_irq	= omap_init_irq,
 	.handle_irq	= gic_handle_irq,
-	.init_machine	= omap4_init,
+	.init_machine	= omap_generic_init,
 	.timer		= &omap4_timer,
 	.dt_compat	= omap4_boards_compat,
 	.restart	= omap_prcm_restart,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index f3953a49928..84fa55b4c8b 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -700,11 +700,14 @@ static int __init omap2_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_audio();
-	omap_init_mcpdm();
-	omap_init_dmic();
 	omap_init_camera();
 	omap_init_mbox();
-	omap_init_mcspi();
+	/* If dtb is there, the devices will be created dynamically */
+	if (!of_have_populated_dt()) {
+		omap_init_dmic();
+		omap_init_mcpdm();
+		omap_init_mcspi();
+	}
 	omap_init_pmu();
 	omap_hdq_init();
 	omap_init_sti();
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 064cab03d2b..a80e093b039 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -20,6 +20,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -146,7 +147,10 @@ static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
  */
 static int __init omap2_gpio_init(void)
 {
-	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init,
-						NULL);
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
+	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
 }
 postcore_initcall(omap2_gpio_init);
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 8103f9644e2..550cfc2a1f2 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -16,48 +16,62 @@
 #include <linux/err.h>
 #include <mach/platform.h>
 #include <mach/irqs.h>
-#include <mach/i2c.h>
 
-static struct i2c_pnx_data i2c0_data = {
-	.name = I2C_CHIP_NAME "0",
-	.base = PNX4008_I2C1_BASE,
-	.irq = I2C_1_INT,
+static struct resource i2c0_resources[] = {
+	{
+		.start = PNX4008_I2C1_BASE,
+		.end = PNX4008_I2C1_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = I2C_1_INT,
+		.end = I2C_1_INT,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
-static struct i2c_pnx_data i2c1_data = {
-	.name = I2C_CHIP_NAME "1",
-	.base = PNX4008_I2C2_BASE,
-	.irq = I2C_2_INT,
+static struct resource i2c1_resources[] = {
+	{
+		.start = PNX4008_I2C2_BASE,
+		.end = PNX4008_I2C2_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = I2C_2_INT,
+		.end = I2C_2_INT,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
-static struct i2c_pnx_data i2c2_data = {
-	.name = "USB-I2C",
-	.base = (PNX4008_USB_CONFIG_BASE + 0x300),
-	.irq = USB_I2C_INT,
+static struct resource i2c2_resources[] = {
+	{
+		.start = PNX4008_USB_CONFIG_BASE + 0x300,
+		.end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = USB_I2C_INT,
+		.end = USB_I2C_INT,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device i2c0_device = {
-	.name = "pnx-i2c",
+	.name = "pnx-i2c.0",
 	.id = 0,
-	.dev = {
-		.platform_data = &i2c0_data,
-	},
+	.resource = i2c0_resources,
+	.num_resources = ARRAY_SIZE(i2c0_resources),
 };
 
 static struct platform_device i2c1_device = {
-	.name = "pnx-i2c",
+	.name = "pnx-i2c.1",
 	.id = 1,
-	.dev = {
-		.platform_data = &i2c1_data,
-	},
+	.resource = i2c1_resources,
+	.num_resources = ARRAY_SIZE(i2c1_resources),
 };
 
 static struct platform_device i2c2_device = {
-	.name = "pnx-i2c",
+	.name = "pnx-i2c.2",
 	.id = 2,
-	.dev = {
-		.platform_data = &i2c2_data,
-	},
+	.resource = i2c2_resources,
+	.num_resources = ARRAY_SIZE(i2c2_resources),
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pnx4008/include/mach/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
deleted file mode 100644
index 259ac53abf4..00000000000
--- a/arch/arm/mach-pnx4008/include/mach/i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H__
-#define __ASM_ARCH_I2C_H__
-
-enum {
-	mstatus_tdi = 0x00000001,
-	mstatus_afi = 0x00000002,
-	mstatus_nai = 0x00000004,
-	mstatus_drmi = 0x00000008,
-	mstatus_active = 0x00000020,
-	mstatus_scl = 0x00000040,
-	mstatus_sda = 0x00000080,
-	mstatus_rff = 0x00000100,
-	mstatus_rfe = 0x00000200,
-	mstatus_tff = 0x00000400,
-	mstatus_tfe = 0x00000800,
-};
-
-enum {
-	mcntrl_tdie = 0x00000001,
-	mcntrl_afie = 0x00000002,
-	mcntrl_naie = 0x00000004,
-	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
-	mcntrl_tffie = 0x00000080,
-	mcntrl_reset = 0x00000100,
-	mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
-	rw_bit = 1 << 0,
-	start_bit = 1 << 8,
-	stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
-#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
-#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
-#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
-#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
-#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
-
-#define HCLK_MHZ		13
-#define I2C_CHIP_NAME		"PNX4008-I2C"
-
-#endif				/* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c85e6ecda60..ff5f12fd742 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -3,6 +3,8 @@
 
 extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+				 unsigned int mult, unsigned int div);
 struct twd_local_timer;
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
diff --git a/arch/arm/mach-shmobile/include/mach/intc.h b/arch/arm/mach-shmobile/include/mach/intc.h
index 8b22258c8ca..a5603c76cfe 100644
--- a/arch/arm/mach-shmobile/include/mach/intc.h
+++ b/arch/arm/mach-shmobile/include/mach/intc.h
@@ -142,6 +142,50 @@ static struct intc_desc p ## _desc __initdata = {			\
 			     p ## _sense_registers, p ## _ack_registers) \
 }
 
+#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
+									\
+static struct resource p ## _resources[] __initdata = {			\
+	[0] = {								\
+		.start	= base,						\
+		.end	= base + 0x64,					\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+};									\
+									\
+enum {									\
+	p ## _UNUSED = 0,						\
+	INTC_IRQ_PINS_ENUM_16H(p),					\
+};									\
+									\
+static struct intc_vect p ## _vectors[] __initdata = {			\
+	INTC_IRQ_PINS_VECT_16H(p, vect),				\
+};									\
+									\
+static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
+	INTC_IRQ_PINS_MASK_16H(p, base),				\
+};									\
+									\
+static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
+	INTC_IRQ_PINS_PRIO_16H(p, base),				\
+};									\
+									\
+static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
+	INTC_IRQ_PINS_SENSE_16H(p, base),				\
+};									\
+									\
+static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
+	INTC_IRQ_PINS_ACK_16H(p, base),					\
+};									\
+									\
+static struct intc_desc p ## _desc __initdata = {			\
+	.name = str,							\
+	.resource = p ## _resources,					\
+	.num_resources = ARRAY_SIZE(p ## _resources),			\
+	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
+			     p ## _mask_registers, p ## _prio_registers, \
+			     p ## _sense_registers, p ## _ack_registers) \
+}
+
 #define INTC_IRQ_PINS_32(p, base, vect, str)				\
 									\
 static struct resource p ## _resources[] __initdata = {			\
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 4e686cc201f..06a5da3c305 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -7,7 +7,7 @@
 #define gic_spi(nr)		((nr) + 32)
 
 /* INTCS */
-#define INTCS_VECT_BASE		0x2200
+#define INTCS_VECT_BASE		0x3400
 #define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
 #define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
 
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 6447e0af52d..2587a22842f 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -305,14 +306,16 @@ static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
 			 intca_mask_registers, intca_prio_registers,
 			 NULL);
 
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "sh7372-intca-irq-pins");
+INTC_IRQ_PINS_16(intca_irq_pins_lo, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-lo");
+
+INTC_IRQ_PINS_16H(intca_irq_pins_hi, 0xe6900000,
+		 INTC_VECT, "sh7372-intca-irq-hi");
+
 enum {
 	UNUSED_INTCS = 0,
 	ENABLED_INTCS,
 
-	INTCS,
-
 	/* interrupt sources INTCS */
 
 	/* IRQ0S - IRQ31S */
@@ -426,8 +429,6 @@ static struct intc_vect intcs_vectors[] = {
 	INTCS_VECT(CPORTS2R, 0x1a20),
 	/* CEC */
 	INTCS_VECT(JPU6E, 0x1a80),
-
-	INTC_VECT(INTCS, 0xf80),
 };
 
 static struct intc_group intcs_groups[] __initdata = {
@@ -490,9 +491,6 @@ static struct intc_mask_reg intcs_mask_registers[] = {
 	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
 	  { MFIS2_INTCS, CPORTS2R, 0, 0,
 	    JPU6E, 0, 0, 0 } },
-	{ 0xffd20104, 0, 16, /* INTAMASK */
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } },
 };
 
 /* Priority is needed for INTCA to receive the INTCS interrupt */
@@ -557,18 +555,30 @@ static void __iomem *intcs_ffd5;
 void __init sh7372_init_irq(void)
 {
 	void __iomem *intevtsa;
+	int n;
 
 	intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE);
 	intevtsa = intcs_ffd2 + 0x100;
 	intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
 
 	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
+	register_intc_controller(&intca_irq_pins_lo_desc);
+	register_intc_controller(&intca_irq_pins_hi_desc);
 	register_intc_controller(&intcs_desc);
 
+	/* setup dummy cascade chip for INTCS */
+	n = evt2irq(0xf80);
+	irq_alloc_desc_at(n, numa_node_id());
+	irq_set_chip_and_handler_name(n, &dummy_irq_chip,
+				      handle_level_irq, "level");
+	set_irq_flags(n, IRQF_VALID); /* yuck */
+
 	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
+	irq_set_handler_data(n, (void *)intevtsa);
+	irq_set_chained_handler(n, intcs_demux);
+
+	/* unmask INTCS in INTAMASK */
+	iowrite16(0, intcs_ffd2 + 0x104);
 }
 
 static unsigned short ffd2[0x200];
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 2fe8f83ca12..4c7fece5ef9 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/uio_driver.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -1092,3 +1093,50 @@ void __init sh7372_add_early_devices(void)
 	/* override timer setup with soc-specific code */
 	shmobile_timer.init = sh7372_earlytimer_init;
 }
+
+#ifdef CONFIG_USE_OF
+
+void __init sh7372_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */
+
+	early_platform_add_devices(sh7372_early_devices,
+				   ARRAY_SIZE(sh7372_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
+	{ }
+};
+
+void __init sh7372_add_standard_devices_dt(void)
+{
+	/* clocks are setup late during boot in the case of DT */
+	sh7372_clock_init();
+
+	platform_add_devices(sh7372_early_devices,
+			    ARRAY_SIZE(sh7372_early_devices));
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     sh7372_auxdata_lookup, NULL);
+}
+
+static const char *sh7372_boards_compat_dt[] __initdata = {
+	"renesas,sh7372",
+	NULL,
+};
+
+DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices_dt,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh7372_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= sh7372_add_standard_devices_dt,
+	.timer		= &shmobile_timer,
+	.dt_compat	= sh7372_boards_compat_dt,
+MACHINE_END
+
+#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 8b79e7917a2..cba39d86668 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -19,9 +19,26 @@
  *
  */
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
+void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
+				 unsigned int mult, unsigned int div)
+{
+	/* calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core mhz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S
+	 *
+	 * this will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
+	 */
+
+	unsigned int value = (1000000 * mult) / (HZ * div);
+
+	lpj_fine = max_cpu_core_mhz * value;
+}
+
 static void __init shmobile_late_time_init(void)
 {
 	/*
diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig
index 2cee6b0de37..d9fe11cb6f1 100644
--- a/arch/arm/mach-spear3xx/Kconfig
+++ b/arch/arm/mach-spear3xx/Kconfig
@@ -5,39 +5,19 @@
 if ARCH_SPEAR3XX
 
 menu "SPEAr3xx Implementations"
-config BOARD_SPEAR300_EVB
-	bool "SPEAr300 Evaluation Board"
-	select MACH_SPEAR300
-	help
-	  Supports ST SPEAr300 Evaluation Board
-
-config BOARD_SPEAR310_EVB
-	bool "SPEAr310 Evaluation Board"
-	select MACH_SPEAR310
-	help
-	  Supports ST SPEAr310 Evaluation Board
-
-config BOARD_SPEAR320_EVB
-	bool "SPEAr320 Evaluation Board"
-	select MACH_SPEAR320
-	help
-	  Supports ST SPEAr320 Evaluation Board
-
-endmenu
-
 config MACH_SPEAR300
-	bool "SPEAr300"
+	bool "SPEAr300 Machine support with Device Tree"
 	help
-	  Supports ST SPEAr300 Machine
+	  Supports ST SPEAr300 machine configured via the device-tree
 
 config MACH_SPEAR310
-	bool "SPEAr310"
+	bool "SPEAr310 Machine support with Device Tree"
 	help
-	  Supports ST SPEAr310 Machine
+	  Supports ST SPEAr310 machine configured via the device-tree
 
 config MACH_SPEAR320
-	bool "SPEAr320"
+	bool "SPEAr320 Machine support with Device Tree"
 	help
-	  Supports ST SPEAr320 Machine
-
+	  Supports ST SPEAr320 machine configured via the device-tree
+endmenu
 endif #ARCH_SPEAR3XX
diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile
index b2486248970..17b5d83cf2d 100644
--- a/arch/arm/mach-spear3xx/Makefile
+++ b/arch/arm/mach-spear3xx/Makefile
@@ -3,24 +3,13 @@
 #
 
 # common files
-obj-y	+= spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx.o clock.o
 
 # spear300 specific files
 obj-$(CONFIG_MACH_SPEAR300) += spear300.o
 
-# spear300 boards files
-obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
-
-
 # spear310 specific files
 obj-$(CONFIG_MACH_SPEAR310) += spear310.o
 
-# spear310 boards files
-obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
-
-
 # spear320 specific files
 obj-$(CONFIG_MACH_SPEAR320) += spear320.o
-
-# spear320 boards files
-obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot
index 4674a4c221d..d93e2177e6e 100644
--- a/arch/arm/mach-spear3xx/Makefile.boot
+++ b/arch/arm/mach-spear3xx/Makefile.boot
@@ -1,3 +1,7 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR300)	+= spear300-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR310)	+= spear310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR320)	+= spear320-evb.dtb
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 6c4841f5522..cd6c1109908 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -11,12 +11,112 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clkdev.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/of_platform.h>
 #include <asm/mach-types.h>
 #include <plat/clock.h>
 #include <mach/misc_regs.h>
+#include <mach/spear.h>
+
+#define PLL1_CTR		(MISC_BASE + 0x008)
+#define PLL1_FRQ		(MISC_BASE + 0x00C)
+#define PLL1_MOD		(MISC_BASE + 0x010)
+#define PLL2_CTR		(MISC_BASE + 0x014)
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		(MISC_BASE + 0x018)
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		(MISC_BASE + 0x01C)
+#define PLL_CLK_CFG		(MISC_BASE + 0x020)
+#define CORE_CLK_CFG		(MISC_BASE + 0x024)
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
+/* PERIP_CLK_CFG register masks */
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		11
+#define GPT2_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_VAL	0
+#define AUX_CLK_PLL1_VAL	1
+
+#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
+/* PERIP1_CLK_ENB register masks */
+#define UART_CLK_ENB		3
+#define SSP_CLK_ENB		5
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FIRDA_CLK_ENB		10
+#define GPT1_CLK_ENB		11
+#define GPT2_CLK_ENB		12
+#define ADC_CLK_ENB		15
+#define RTC_CLK_ENB		17
+#define GPIO_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH_CLK_ENB		25
+#define C3_CLK_ENB		31
+
+#define RAS_CLK_ENB		(MISC_BASE + 0x034)
+
+#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
+#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
+#define UART_CLK_SYNT		(MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB		31
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
 
 /* root clks */
 /* 32 KHz oscillator clock */
@@ -411,6 +511,21 @@ static struct clk usbd_clk = {
 	.recalc = &follow_parent,
 };
 
+/* clock derived from usbh clk */
+/* usbh0 clock */
+static struct clk usbh0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &usbh_clk,
+	.recalc = &follow_parent,
+};
+
+/* usbh1 clock */
+static struct clk usbh1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &usbh_clk,
+	.recalc = &follow_parent,
+};
+
 /* clock derived from ahb clk */
 /* apb masks structure */
 static struct bus_clk_masks apb_masks = {
@@ -652,109 +767,126 @@ static struct clk pwm_clk = {
 
 /* array of all spear 3xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
+	CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
 	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
+	CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
+	CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
 	/* clock derived from 32 KHz osc clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
+	CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
 	/* clock derived from 24 MHz osc clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
+	CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
+	CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
 	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt1_synth_clk",	.clk = &gpt1_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .dev_id = "uart",		.clk = &uart_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
+	CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
+	CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
+	CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
+	CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
+	CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
+	CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
+	CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
+	CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
+	CLKDEV_INIT("firda", NULL, &firda_clk),
+	CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
+	CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
+	CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
 	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",   .clk = &usbd_clk},
-	{ .con_id = "usbh_clk",		.clk = &usbh_clk},
+	CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
+	CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk),
+	/* clock derived from usbh clk */
+	CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
+	CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
 	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "c3",		.clk = &c3_clk},
+	CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
+	CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
+	CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
+	CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
+	CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
+	CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
+	CLKDEV_INIT("c3", NULL, &c3_clk),
 	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "gpio",		.clk = &gpio_clk},
+	CLKDEV_INIT("adc", NULL, &adc_clk),
+	CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
+	CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
 };
 
 /* array of all spear 300 clock lookups */
 #ifdef CONFIG_MACH_SPEAR300
 static struct clk_lookup spear300_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
-	{ .dev_id = "keyboard",		.clk = &kbd_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
+	CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
+	CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
+	CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
+	CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
+	CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
 };
+
+void __init spear300_clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
+		clk_register(&spear300_clk_lookups[i]);
+
+	clk_init();
+}
 #endif
 
 /* array of all spear 310 clock lookups */
 #ifdef CONFIG_MACH_SPEAR310
 static struct clk_lookup spear310_clk_lookups[] = {
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-	{ .dev_id = "uart3",		.clk = &uart3_clk},
-	{ .dev_id = "uart4",		.clk = &uart4_clk},
-	{ .dev_id = "uart5",		.clk = &uart5_clk},
+	CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
+	CLKDEV_INIT(NULL, "emi", &emi_clk),
+	CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
+	CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
+	CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
+	CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
+	CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
 };
+
+void __init spear310_clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
+		clk_register(&spear310_clk_lookups[i]);
+
+	clk_init();
+}
 #endif
 
 /* array of all spear 320 clock lookups */
 #ifdef CONFIG_MACH_SPEAR320
 static struct clk_lookup spear320_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "pwm",		.clk = &pwm_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
-	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-};
-#endif
-
-void __init spear3xx_clk_init(void)
+	CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
+	CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
+	CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
+	CLKDEV_INIT(NULL, "emi", &emi_clk),
+	CLKDEV_INIT("pwm", NULL, &pwm_clk),
+	CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
+	CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
+	CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
+	CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
+	CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
+	CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
+	CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
+};
+
+void __init spear320_clk_init(void)
 {
-	int i, cnt;
-	struct clk_lookup *lookups;
-
-	if (machine_is_spear300()) {
-		cnt = ARRAY_SIZE(spear300_clk_lookups);
-		lookups = spear300_clk_lookups;
-	} else if (machine_is_spear310()) {
-		cnt = ARRAY_SIZE(spear310_clk_lookups);
-		lookups = spear310_clk_lookups;
-	} else {
-		cnt = ARRAY_SIZE(spear320_clk_lookups);
-		lookups = spear320_clk_lookups;
-	}
+	int i;
 
 	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
 		clk_register(&spear_clk_lookups[i]);
 
-	for (i = 0; i < cnt; i++)
-		clk_register(&lookups[i]);
+	for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
+		clk_register(&spear320_clk_lookups[i]);
 
 	clk_init();
 }
+#endif
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 14276e5a98d..e4f4d721cda 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -14,6 +14,7 @@
 #ifndef __MACH_GENERIC_H
 #define __MACH_GENERIC_H
 
+#include <linux/amba/pl08x.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
@@ -21,26 +22,15 @@
 #include <asm/mach/map.h>
 #include <plat/padmux.h>
 
-/* spear3xx declarations */
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	SPEAR3XX_IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	SPEAR3XX_IRQ_CPU_GPT1_2
-
 /* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
 extern struct sys_timer spear3xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
 
 /* Add spear3xx family function declarations here */
-void __init spear3xx_clk_init(void);
-void __init spear_setup_timer(void);
+void __init spear_setup_timer(resource_size_t base, int irq);
 void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
+void __init spear3xx_dt_init_irq(void);
 
 void spear_restart(char, const char *);
 
@@ -99,9 +89,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
 
 /* spear300 declarations */
 #ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
 /* pad mux modes */
 extern struct pmx_mode spear300_nand_mode;
 extern struct pmx_mode spear300_nor_mode;
@@ -133,16 +120,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
 extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
 extern struct pmx_dev spear300_pmx_gpio1;
 
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
+/* Add spear300 machine declarations here */
+void __init spear300_clk_init(void);
 
 #endif /* CONFIG_MACH_SPEAR300 */
 
 /* spear310 declarations */
 #ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
 /* pad mux devices */
 extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
 extern struct pmx_dev spear310_pmx_emi_cs_2_3;
@@ -153,16 +137,13 @@ extern struct pmx_dev spear310_pmx_fsmc;
 extern struct pmx_dev spear310_pmx_rs485_0_1;
 extern struct pmx_dev spear310_pmx_tdm0;
 
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
+/* Add spear310 machine declarations here */
+void __init spear310_clk_init(void);
 
 #endif /* CONFIG_MACH_SPEAR310 */
 
 /* spear320 declarations */
 #ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
 /* pad mux modes */
 extern struct pmx_mode spear320_auto_net_smii_mode;
 extern struct pmx_mode spear320_auto_net_mii_mode;
@@ -193,9 +174,8 @@ extern struct pmx_dev spear320_pmx_smii0;
 extern struct pmx_dev spear320_pmx_smii1;
 extern struct pmx_dev spear320_pmx_i2c1;
 
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
+/* Add spear320 machine declarations here */
+void __init spear320_clk_init(void);
 
 #endif /* CONFIG_MACH_SPEAR320 */
 
diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h
index 4660c0d8ec0..40a8c178f10 100644
--- a/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear3xx/include/mach/hardware.h
@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h
index 6e265442808..319620a1afb 100644
--- a/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear3xx/include/mach/irqs.h
@@ -14,141 +14,15 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-/* SPEAr3xx IRQ definitions */
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0		0
+/* FIXME: probe all these from DT */
 #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM		1
 #define SPEAR3XX_IRQ_CPU_GPT1_1			2
-#define SPEAR3XX_IRQ_CPU_GPT1_2			3
-#define SPEAR3XX_IRQ_BASIC_GPT1_1		4
-#define SPEAR3XX_IRQ_BASIC_GPT1_2		5
-#define SPEAR3XX_IRQ_BASIC_GPT2_1		6
-#define SPEAR3XX_IRQ_BASIC_GPT2_2		7
-#define SPEAR3XX_IRQ_BASIC_DMA			8
-#define SPEAR3XX_IRQ_BASIC_SMI			9
-#define SPEAR3XX_IRQ_BASIC_RTC			10
-#define SPEAR3XX_IRQ_BASIC_GPIO			11
-#define SPEAR3XX_IRQ_BASIC_WDT			12
-#define SPEAR3XX_IRQ_DDR_CONTROLLER		13
-#define SPEAR3XX_IRQ_SYS_ERROR			14
-#define SPEAR3XX_IRQ_WAKEUP_RCV			15
-#define SPEAR3XX_IRQ_JPEG			16
-#define SPEAR3XX_IRQ_IRDA			17
-#define SPEAR3XX_IRQ_ADC			18
-#define SPEAR3XX_IRQ_UART			19
-#define SPEAR3XX_IRQ_SSP			20
-#define SPEAR3XX_IRQ_I2C			21
-#define SPEAR3XX_IRQ_MAC_1			22
-#define SPEAR3XX_IRQ_MAC_2			23
-#define SPEAR3XX_IRQ_USB_DEV			24
-#define SPEAR3XX_IRQ_USB_H_OHCI_0		25
-#define SPEAR3XX_IRQ_USB_H_EHCI_0		26
-#define SPEAR3XX_IRQ_USB_H_EHCI_1		SPEAR3XX_IRQ_USB_H_EHCI_0
-#define SPEAR3XX_IRQ_USB_H_OHCI_1		27
 #define SPEAR3XX_IRQ_GEN_RAS_1			28
 #define SPEAR3XX_IRQ_GEN_RAS_2			29
 #define SPEAR3XX_IRQ_GEN_RAS_3			30
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1		31
 #define SPEAR3XX_IRQ_VIC_END			32
-
 #define SPEAR3XX_VIRQ_START			SPEAR3XX_IRQ_VIC_END
 
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* SPEAr310 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
-#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
-
-/* SPEAr320 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
-#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
-#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
-
-/*
- * GPIO pins virtual irqs
- * Use the lowest number for the GPIO virtual IRQs base on which subarchs
- * we have compiled in
- */
-#if defined(CONFIG_MACH_SPEAR310)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 18)
-#elif defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 17)
-#else
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 9)
-#endif
-
-#define SPEAR300_GPIO1_INT_BASE			(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_PLGPIO_COUNT	102
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_PLGPIO_INT_BASE		(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_GPIO_INT_END			(SPEAR3XX_PLGPIO_INT_BASE + \
-							SPEAR3XX_PLGPIO_COUNT)
-#else
-#define SPEAR3XX_GPIO_INT_END	(SPEAR300_GPIO1_INT_BASE + 8)
-#endif
-
-#define SPEAR3XX_VIRQ_END	SPEAR3XX_GPIO_INT_END
-#define NR_IRQS			SPEAR3XX_VIRQ_END
+#define NR_IRQS			160
 
 #endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
index 5bd8cd8d485..e0ab72e6150 100644
--- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h
@@ -14,151 +14,7 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
-
 #define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		11
-#define GPT2_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB		3
-#define SSP_CLK_ENB		5
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FIRDA_CLK_ENB		10
-#define GPT1_CLK_ENB		11
-#define GPT2_CLK_ENB		12
-#define ADC_CLK_ENB		15
-#define RTC_CLK_ENB		17
-#define GPIO_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH_CLK_ENB		25
-#define C3_CLK_ENB		31
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h
index 63fd9835691..6d4dadc6763 100644
--- a/arch/arm/mach-spear3xx/include/mach/spear.h
+++ b/arch/arm/mach-spear3xx/include/mach/spear.h
@@ -15,60 +15,27 @@
 #define __MACH_SPEAR3XX_H
 
 #include <asm/memory.h>
-#include <mach/spear300.h>
-#include <mach/spear310.h>
-#include <mach/spear320.h>
-
-#define SPEAR3XX_ML_SDRAM_BASE		UL(0x00000000)
-
-#define SPEAR3XX_ICM9_BASE		UL(0xC0000000)
 
 /* ICM1 - Low speed connection */
 #define SPEAR3XX_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR3XX_ICM1_2_BASE		UL(0xFD000000)
 #define SPEAR3XX_ICM1_UART_BASE		UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_ADC_BASE		UL(0xD0080000)
+#define VA_SPEAR3XX_ICM1_UART_BASE	(VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
 #define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
-#define SPEAR3XX_ICM1_I2C_BASE		UL(0xD0180000)
-#define SPEAR3XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR3XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR3XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE	UL(0xD8800000)
-#define SPEAR3XX_ICM2_HWACCEL1_BASE	UL(0xD9000000)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR3XX_ICM4_MII_BASE		UL(0xE0800000)
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR3XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	UL(0xE1800000)
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR3XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
 
 /* ML1 - Multi Layer CPU Subsystem */
 #define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
-#define SPEAR3XX_ML1_TMR_BASE		UL(0xF0000000)
-#define SPEAR3XX_ML1_VIC_BASE		UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
+#define SPEAR3XX_CPU_TMR_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR3XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR3XX_ICM3_TMR0_BASE		UL(0xFC800000)
-#define SPEAR3XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR3XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR3XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR3XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR3XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_TMR1_BASE		UL(0xFCB00000)
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE
diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h
deleted file mode 100644
index 3b6ea072904..00000000000
--- a/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear300.h
- *
- * SPEAr300 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR300
-
-#ifndef __MACH_SPEAR300_H
-#define __MACH_SPEAR300_H
-
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE		UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG	0x54
-#define SPEAR300_INT_STS_MASK_REG	0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
-#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
-#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
-
-#define SPEAR300_CLCD_BASE		UL(0x60000000)
-#define SPEAR300_SDHCI_BASE		UL(0x70000000)
-#define SPEAR300_NAND_0_BASE		UL(0x80000000)
-#define SPEAR300_NAND_1_BASE		UL(0x84000000)
-#define SPEAR300_NAND_2_BASE		UL(0x88000000)
-#define SPEAR300_NAND_3_BASE		UL(0x8c000000)
-#define SPEAR300_NOR_0_BASE		UL(0x90000000)
-#define SPEAR300_NOR_1_BASE		UL(0x91000000)
-#define SPEAR300_NOR_2_BASE		UL(0x92000000)
-#define SPEAR300_NOR_3_BASE		UL(0x93000000)
-#define SPEAR300_FSMC_BASE		UL(0x94000000)
-#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
-#define SPEAR300_KEYBOARD_BASE		UL(0xA0000000)
-#define SPEAR300_GPIO_BASE		UL(0xA9000000)
-
-#endif /* __MACH_SPEAR300_H */
-
-#endif /* CONFIG_MACH_SPEAR300 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h
deleted file mode 100644
index 1567d0da725..00000000000
--- a/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear310.h
- *
- * SPEAr310 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR310
-
-#ifndef __MACH_SPEAR310_H
-#define __MACH_SPEAR310_H
-
-#define SPEAR310_NAND_BASE		UL(0x40000000)
-#define SPEAR310_FSMC_BASE		UL(0x44000000)
-#define SPEAR310_UART1_BASE		UL(0xB2000000)
-#define SPEAR310_UART2_BASE		UL(0xB2080000)
-#define SPEAR310_UART3_BASE		UL(0xB2100000)
-#define SPEAR310_UART4_BASE		UL(0xB2180000)
-#define SPEAR310_UART5_BASE		UL(0xB2200000)
-#define SPEAR310_HDLC_BASE		UL(0xB2800000)
-#define SPEAR310_RS485_0_BASE		UL(0xB3000000)
-#define SPEAR310_RS485_1_BASE		UL(0xB3800000)
-#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR310_INT_STS_MASK_REG	0x04
-#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
-#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
-#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
-#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
-#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
-#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
-#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
-#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
-#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
-#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
-#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
-#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
-#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
-#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
-#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
-#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
-#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
-
-#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
-#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
-#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
-#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
-
-#endif /* __MACH_SPEAR310_H */
-
-#endif /* CONFIG_MACH_SPEAR310 */
diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h
deleted file mode 100644
index 8cfa83fa129..00000000000
--- a/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear320.h
- *
- * SPEAr320 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR320
-
-#ifndef __MACH_SPEAR320_H
-#define __MACH_SPEAR320_H
-
-#define SPEAR320_EMI_CTRL_BASE		UL(0x40000000)
-#define SPEAR320_FSMC_BASE		UL(0x4C000000)
-#define SPEAR320_NAND_BASE		UL(0x50000000)
-#define SPEAR320_I2S_BASE		UL(0x60000000)
-#define SPEAR320_SDHCI_BASE		UL(0x70000000)
-#define SPEAR320_CLCD_BASE		UL(0x90000000)
-#define SPEAR320_PAR_PORT_BASE		UL(0xA0000000)
-#define SPEAR320_CAN0_BASE		UL(0xA1000000)
-#define SPEAR320_CAN1_BASE		UL(0xA2000000)
-#define SPEAR320_UART1_BASE		UL(0xA3000000)
-#define SPEAR320_UART2_BASE		UL(0xA4000000)
-#define SPEAR320_SSP0_BASE		UL(0xA5000000)
-#define SPEAR320_SSP1_BASE		UL(0xA6000000)
-#define SPEAR320_I2C_BASE		UL(0xA7000000)
-#define SPEAR320_PWM_BASE		UL(0xA8000000)
-#define SPEAR320_SMII0_BASE		UL(0xAA000000)
-#define SPEAR320_SMII1_BASE		UL(0xAB000000)
-#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR320_INT_STS_MASK_REG		0x04
-#define SPEAR320_INT_CLR_MASK_REG		0x04
-#define SPEAR320_INT_ENB_MASK_REG		0x08
-#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
-#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
-#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
-#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
-#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
-#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
-#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
-#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
-#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
-#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
-#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
-#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
-#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
-#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
-#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
-#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
-#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
-#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
-
-#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
-#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
-#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
-
-#endif /* __MACH_SPEAR320_H */
-
-#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index f7db66812ab..febcdd8d4e9 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -3,21 +3,62 @@
  *
  * SPEAr300 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr300: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE		UL(0x50000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_INT_ENB_MASK_REG	0x54
+#define SPEAR300_INT_STS_MASK_REG	0x58
+#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
+#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
+#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
+#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
+#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
+#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
+#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
+#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
+#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
+
+#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
+
+#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
+
+
+/* SPEAr300 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -423,45 +464,275 @@ static struct spear_shirq shirq_ras1 = {
 	},
 };
 
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= SPEAR300_GPIO1_INT_BASE,
+/* padmux devices to enable */
+static struct pmx_dev *spear300_evb_pmx_devs[] = {
+	/* spear3xx specific devices */
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp_cs,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_mii,
+	&spear3xx_pmx_uart0,
+
+	/* spear300 specific devices */
+	&spear300_pmx_fsmc_2_chips,
+	&spear300_pmx_clcd,
+	&spear300_pmx_telecom_sdhci_4bit,
+	&spear300_pmx_gpio1,
 };
 
-AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
-	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
 
-/* spear300 routines */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* Add SPEAr300 auxdata to pass platform data */
+static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
+
+static void __init spear300_dt_init(void)
 {
-	int ret = 0;
+	int ret = -EINVAL;
+
+	pl080_plat_data.slave_channels = spear300_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear300_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
 	if (shirq_ras1.regs.base) {
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ\n");
+			pr_err("Error registering Shared IRQ\n");
 	}
 
-	/* pmx initialization */
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+	if (of_machine_is_compatible("st,spear300-evb")) {
+		/* pmx initialization */
+		pmx_driver.mode = &spear300_photo_frame_mode;
+		pmx_driver.devs = spear300_evb_pmx_devs;
+		pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
+
+		pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+		if (pmx_driver.base) {
+			ret = pmx_register(&pmx_driver);
+			if (ret)
+				pr_err("padmux: registration failed. err no: %d\n",
+						ret);
+			/* Free Mapping, device selection already done */
+			iounmap(pmx_driver.base);
+		}
 
-	pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
-	if (pmx_driver.base) {
-		ret = pmx_register(&pmx_driver);
 		if (ret)
-			printk(KERN_ERR "padmux: registration failed. err no"
-					": %d\n", ret);
-		/* Free Mapping, device selection already done */
-		iounmap(pmx_driver.base);
+			pr_err("Initialization Failed");
 	}
 }
+
+static const char * const spear300_dt_board_compat[] = {
+	"st,spear300",
+	"st,spear300-evb",
+	NULL,
+};
+
+static void __init spear300_map_io(void)
+{
+	spear3xx_map_io();
+	spear300_clk_init();
+}
+
+DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
+	.map_io		=	spear300_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear300_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear300_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
deleted file mode 100644
index 3462ab9d612..00000000000
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300_evb.c
- *
- * SPEAr300 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp_cs,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear300 specific devices */
-	&spear300_pmx_fsmc_2_chips,
-	&spear300_pmx_clcd,
-	&spear300_pmx_telecom_sdhci_4bit,
-	&spear300_pmx_gpio1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear300 specific devices */
-	&spear300_gpio1_device,
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear300 specific devices */
-};
-
-static void __init spear300_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear300 machine init function */
-	spear300_init(&spear300_photo_frame_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear300_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index febaa6fcfb6..b26e41566b5 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -3,19 +3,84 @@
  *
  * SPEAr310 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr310: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+#define SPEAR310_UART1_BASE		UL(0xB2000000)
+#define SPEAR310_UART2_BASE		UL(0xB2080000)
+#define SPEAR310_UART3_BASE		UL(0xB2100000)
+#define SPEAR310_UART4_BASE		UL(0xB2180000)
+#define SPEAR310_UART5_BASE		UL(0xB2200000)
+#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR310_INT_STS_MASK_REG	0x04
+#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
+#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
+#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
+#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
+#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
+#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
+#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
+#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
+#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
+#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
+#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
+#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
+#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
+#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
+#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
+#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
+#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
+
+#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
+#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
+#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
+#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
+
+/* SPEAr310 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
+#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
+
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -255,17 +320,271 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear310 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear310_evb_pmx_devs[] = {
+	/* spear3xx specific devices */
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_gpio_pin0,
+	&spear3xx_pmx_gpio_pin1,
+	&spear3xx_pmx_gpio_pin2,
+	&spear3xx_pmx_gpio_pin3,
+	&spear3xx_pmx_gpio_pin4,
+	&spear3xx_pmx_gpio_pin5,
+	&spear3xx_pmx_uart0,
+
+	/* spear310 specific devices */
+	&spear310_pmx_emi_cs_0_1_4_5,
+	&spear310_pmx_emi_cs_2_3,
+	&spear310_pmx_uart1,
+	&spear310_pmx_uart2,
+	&spear310_pmx_uart3_4_5,
+	&spear310_pmx_fsmc,
+	&spear310_pmx_rs485_0_1,
+	&spear310_pmx_tdm0,
+};
 
-/* spear310 routines */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
+
+/* uart devices plat data */
+static struct amba_pl011_data spear310_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart3_tx",
+		.dma_rx_param = "uart3_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart4_tx",
+		.dma_rx_param = "uart4_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart5_tx",
+		.dma_rx_param = "uart5_rx",
+	},
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
+			&spear310_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
+			&spear310_uart_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
+			&spear310_uart_data[2]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
+			&spear310_uart_data[3]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
+			&spear310_uart_data[4]),
+	{}
+};
+
+static void __init spear310_dt_init(void)
 {
 	void __iomem *base;
 	int ret = 0;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear310_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear310_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
@@ -274,35 +593,59 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 2 */
 		shirq_ras2.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras2);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 2\n");
+			pr_err("Error registering Shared IRQ 2\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
+	}
+
+	if (of_machine_is_compatible("st,spear310-evb")) {
+		/* pmx initialization */
+		pmx_driver.base = base;
+		pmx_driver.mode = NULL;
+		pmx_driver.devs = spear310_evb_pmx_devs;
+		pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
+
+		ret = pmx_register(&pmx_driver);
+		if (ret)
+			pr_err("padmux: registration failed. err no: %d\n",
+					ret);
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear310_dt_board_compat[] = {
+	"st,spear310",
+	"st,spear310-evb",
+	NULL,
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear310_map_io(void)
+{
+	spear3xx_map_io();
+	spear310_clk_init();
 }
+
+DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
+	.map_io		=	spear310_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear310_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
deleted file mode 100644
index f92c4993f65..00000000000
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310_evb.c
- *
- * SPEAr310 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_gpio_pin0,
-	&spear3xx_pmx_gpio_pin1,
-	&spear3xx_pmx_gpio_pin2,
-	&spear3xx_pmx_gpio_pin3,
-	&spear3xx_pmx_gpio_pin4,
-	&spear3xx_pmx_gpio_pin5,
-	&spear3xx_pmx_uart0,
-
-	/* spear310 specific devices */
-	&spear310_pmx_emi_cs_0_1_4_5,
-	&spear310_pmx_emi_cs_2_3,
-	&spear310_pmx_uart1,
-	&spear310_pmx_uart2,
-	&spear310_pmx_uart3_4_5,
-	&spear310_pmx_fsmc,
-	&spear310_pmx_rs485_0_1,
-	&spear310_pmx_tdm0,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear310 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear310 specific devices */
-};
-
-static void __init spear310_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear310 machine init function */
-	spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear310_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index deaaf199612..2f5979b0c16 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -3,19 +3,85 @@
  *
  * SPEAr320 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr320: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+#define SPEAR320_UART1_BASE		UL(0xA3000000)
+#define SPEAR320_UART2_BASE		UL(0xA4000000)
+#define SPEAR320_SSP0_BASE		UL(0xA5000000)
+#define SPEAR320_SSP1_BASE		UL(0xA6000000)
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR320_INT_STS_MASK_REG		0x04
+#define SPEAR320_INT_CLR_MASK_REG		0x04
+#define SPEAR320_INT_ENB_MASK_REG		0x08
+#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
+#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
+#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
+#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
+#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
+#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
+#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
+#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
+#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
+#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
+#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
+#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
+#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
+#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
+#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
+#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
+#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
+#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
+
+#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
+#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
+#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
+
+/* SPEAr320 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
+#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
+#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -508,17 +574,271 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear320 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear320_evb_pmx_devs[] = {
+	/* spear3xx specific devices */
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_mii,
+	&spear3xx_pmx_uart0,
+
+	/* spear320 specific devices */
+	&spear320_pmx_fsmc,
+	&spear320_pmx_sdhci,
+	&spear320_pmx_i2s,
+	&spear320_pmx_uart1,
+	&spear320_pmx_uart2,
+	&spear320_pmx_can,
+	&spear320_pmx_pwm0,
+	&spear320_pmx_pwm1,
+	&spear320_pmx_pwm2,
+	&spear320_pmx_mii1,
+};
+
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+static struct pl022_ssp_controller spear320_ssp_data[] = {
+	{
+		.bus_id = 1,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp1_tx",
+		.dma_rx_param = "ssp1_rx",
+		.num_chipselect = 2,
+	}, {
+		.bus_id = 2,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp2_tx",
+		.dma_rx_param = "ssp2_rx",
+		.num_chipselect = 2,
+	}
+};
+
+static struct amba_pl011_data spear320_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	},
+};
 
-/* spear320 routines */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
+			&spear320_ssp_data[0]),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
+			&spear320_ssp_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
+			&spear320_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
+			&spear320_uart_data[1]),
+	{}
+};
+
+static void __init spear320_dt_init(void)
 {
 	void __iomem *base;
 	int ret = 0;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear320_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear320_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
@@ -527,29 +847,53 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
+	}
+
+	if (of_machine_is_compatible("st,spear320-evb")) {
+		/* pmx initialization */
+		pmx_driver.base = base;
+		pmx_driver.mode = &spear320_auto_net_mii_mode;
+		pmx_driver.devs = spear320_evb_pmx_devs;
+		pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
+
+		ret = pmx_register(&pmx_driver);
+		if (ret)
+			pr_err("padmux: registration failed. err no: %d\n",
+					ret);
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear320_dt_board_compat[] = {
+	"st,spear320",
+	"st,spear320-evb",
+	NULL,
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear320_map_io(void)
+{
+	spear3xx_map_io();
+	spear320_clk_init();
 }
+
+DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
+	.map_io		=	spear320_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear320_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear320_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
deleted file mode 100644
index 105334ab702..00000000000
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320_evb.c
- *
- * SPEAr320 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear320 specific devices */
-	&spear320_pmx_fsmc,
-	&spear320_pmx_sdhci,
-	&spear320_pmx_i2s,
-	&spear320_pmx_uart1,
-	&spear320_pmx_uart2,
-	&spear320_pmx_can,
-	&spear320_pmx_pwm0,
-	&spear320_pmx_pwm1,
-	&spear320_pmx_pwm2,
-	&spear320_pmx_mii1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear320 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear320 specific devices */
-};
-
-static void __init spear320_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear320 machine init function */
-	spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear320_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index b1733c37f20..bbb11efa605 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -3,83 +3,25 @@
  *
  * SPEAr3XX machines common source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of_irq.h>
 #include <linux/io.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear3xx machines common devices here */
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
-};
-
-AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
-	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
-
-/* uart device registration */
-AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
-	{SPEAR3XX_IRQ_UART}, NULL);
-
-/* Do spear3xx familiy common initialization part here */
-void __init spear3xx_init(void)
-{
-	/* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear3xx_init_irq(void)
-{
-	vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
-}
-
-/* Following will create static virtual/physical mappings */
-struct map_desc spear3xx_io_desc[] __initdata = {
-	{
-		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-/* This will create static memory mapping for selected devices */
-void __init spear3xx_map_io(void)
-{
-	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear3xx_clk_init();
-}
+#include <mach/spear.h>
 
 /* pad multiplexing support */
 /* devices */
@@ -506,6 +448,68 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
 };
 #endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
 
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = pl08x_filter_id,
+	.dma_tx_param = "ssp0_tx",
+	.dma_rx_param = "ssp0_rx",
+	/*
+	 * This is number of spi devices that can be connected to spi. There are
+	 * two type of chipselects on which slave devices can work. One is chip
+	 * select provided by spi masters other is controlled through external
+	 * gpio's. We can't use chipselect provided from spi master (because as
+	 * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+	 * this number now depends on number of gpios available for spi. each
+	 * slave on each master requires a separate gpio pin.
+	 */
+	.num_chipselect = 2,
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear3xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR3XX_ICM1_2_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+}
+
 static void __init spear3xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_48m_clk";
@@ -530,9 +534,19 @@ static void __init spear3xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1);
 }
 
 struct sys_timer spear3xx_timer = {
 	.init = spear3xx_timer_init,
 };
+
+static const struct of_device_id vic_of_match[] __initconst = {
+	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
+	{ /* Sentinel */ }
+};
+
+void __init spear3xx_dt_init_irq(void)
+{
+	of_irq_init(vic_of_match);
+}
diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot
index 4674a4c221d..af493da37ab 100644
--- a/arch/arm/mach-spear6xx/Makefile.boot
+++ b/arch/arm/mach-spear6xx/Makefile.boot
@@ -1,3 +1,5 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_BOARD_SPEAR600_DT)	+= spear600-evb.dtb
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index a86499a8a15..bef77d43db8 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -16,6 +16,112 @@
 #include <linux/kernel.h>
 #include <plat/clock.h>
 #include <mach/misc_regs.h>
+#include <mach/spear.h>
+
+#define PLL1_CTR		(MISC_BASE + 0x008)
+#define PLL1_FRQ		(MISC_BASE + 0x00C)
+#define PLL1_MOD		(MISC_BASE + 0x010)
+#define PLL2_CTR		(MISC_BASE + 0x014)
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		(MISC_BASE + 0x018)
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		(MISC_BASE + 0x01C)
+#define PLL_CLK_CFG		(MISC_BASE + 0x020)
+#define CORE_CLK_CFG		(MISC_BASE + 0x024)
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
+/* PERIP_CLK_CFG register masks */
+#define CLCD_CLK_SHIFT		2
+#define CLCD_CLK_MASK		0x3
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		10
+#define GPT2_CLK_SHIFT		11
+#define GPT3_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_VAL	0
+#define AUX_CLK_PLL1_VAL	1
+
+#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
+/* PERIP1_CLK_ENB register masks */
+#define UART0_CLK_ENB		3
+#define UART1_CLK_ENB		4
+#define SSP0_CLK_ENB		5
+#define SSP1_CLK_ENB		6
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FSMC_CLK_ENB		9
+#define FIRDA_CLK_ENB		10
+#define GPT2_CLK_ENB		11
+#define GPT3_CLK_ENB		12
+#define GPIO2_CLK_ENB		13
+#define SSP2_CLK_ENB		14
+#define ADC_CLK_ENB		15
+#define GPT1_CLK_ENB		11
+#define RTC_CLK_ENB		17
+#define GPIO1_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define CLCD_CLK_ENB		22
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH0_CLK_ENB		25
+#define USBH1_CLK_ENB		26
+
+#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
+#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
+#define UART_CLK_SYNT		(MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB		31
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
 
 /* root clks */
 /* 32 KHz oscillator clock */
@@ -623,53 +729,53 @@ static struct clk dummy_apb_pclk;
 
 /* array of all spear 6xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
+	CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
 	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
+	CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
+	CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk),
 	/* clock derived from 32 KHz os		 clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
+	CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
 	/* clock derived from 30 MHz os		 clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
+	CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
+	CLKDEV_INIT("wdt", NULL, &wdt_clk),
 	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "clcd_synth_clk",	.clk = &clcd_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .con_id = "gpt3_synth_clk",	.clk = &gpt3_synth_clk},
-	{ .dev_id = "d0000000.serial",	.clk = &uart0_clk},
-	{ .dev_id = "d0080000.serial",	.clk = &uart1_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
+	CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
+	CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
+	CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
+	CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
+	CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk),
+	CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
+	CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
+	CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk),
+	CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk),
+	CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk),
+	CLKDEV_INIT("firda", NULL, &firda_clk),
+	CLKDEV_INIT("clcd", NULL, &clcd_clk),
+	CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
+	CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
+	CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
+	CLKDEV_INIT("gpt3", NULL, &gpt3_clk),
 	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",	.clk = &usbd_clk},
-	{ .con_id = "usbh.0_clk",	.clk = &usbh0_clk},
-	{ .con_id = "usbh.1_clk",	.clk = &usbh1_clk},
+	CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
+	CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
+	CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
 	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "d0200000.i2c",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "fsmc-nand",	.clk = &fsmc_clk},
+	CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
+	CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk),
+	CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
+	CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
+	CLKDEV_INIT("gmac", NULL, &gmac_clk),
+	CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
+	CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk),
 	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "f0100000.gpio",	.clk = &gpio0_clk},
-	{ .dev_id = "fc980000.gpio",	.clk = &gpio1_clk},
-	{ .dev_id = "d8100000.gpio",	.clk = &gpio2_clk},
+	CLKDEV_INIT("adc", NULL, &adc_clk),
+	CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
+	CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
+	CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
+	CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk),
+	CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk),
+	CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk),
 };
 
 void __init spear6xx_clk_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
index 116b99301cf..7167fd331d8 100644
--- a/arch/arm/mach-spear6xx/include/mach/generic.h
+++ b/arch/arm/mach-spear6xx/include/mach/generic.h
@@ -15,34 +15,9 @@
 #define __MACH_GENERIC_H
 
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR6XX_CPU_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
-
-/* Add spear6xx family device structure declarations here */
-extern struct amba_device gpio_device[];
-extern struct amba_device uart_device[];
-extern struct sys_timer spear6xx_timer;
-
-/* Add spear6xx family function declarations here */
-void __init spear_setup_timer(void);
-void __init spear6xx_map_io(void);
-void __init spear6xx_init_irq(void);
-void __init spear6xx_init(void);
-void __init spear600_init(void);
-void __init spear6xx_clk_init(void);
 
+void __init spear_setup_timer(resource_size_t base, int irq);
 void spear_restart(char, const char *);
-
-/* Add spear600 machine device structure declarations here */
+void __init spear6xx_clk_init(void);
 
 #endif /* __MACH_GENERIC_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h
index 0b3f96ae284..40a8c178f10 100644
--- a/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ b/arch/arm/mach-spear6xx/include/mach/hardware.h
@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */
diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h
index 8f214b03d75..2b735389e74 100644
--- a/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ b/arch/arm/mach-spear6xx/include/mach/irqs.h
@@ -16,82 +16,13 @@
 
 /* IRQ definitions */
 /* VIC 1 */
-#define IRQ_INTRCOMM_SW_IRQ			0
-#define IRQ_INTRCOMM_CPU_1			1
-#define IRQ_INTRCOMM_CPU_2			2
-#define IRQ_INTRCOMM_RAS2A11_1			3
-#define IRQ_INTRCOMM_RAS2A11_2			4
-#define IRQ_INTRCOMM_RAS2A12_1			5
-#define IRQ_INTRCOMM_RAS2A12_2			6
-#define IRQ_GEN_RAS_0				7
-#define IRQ_GEN_RAS_1				8
-#define IRQ_GEN_RAS_2				9
-#define IRQ_GEN_RAS_3				10
-#define IRQ_GEN_RAS_4				11
-#define IRQ_GEN_RAS_5				12
-#define IRQ_GEN_RAS_6				13
-#define IRQ_GEN_RAS_7				14
-#define IRQ_GEN_RAS_8				15
+/* FIXME: probe this from DT */
 #define IRQ_CPU_GPT1_1				16
-#define IRQ_CPU_GPT1_2				17
-#define IRQ_LOCAL_GPIO				18
-#define IRQ_PLL_UNLOCK				19
-#define IRQ_JPEG				20
-#define IRQ_FSMC				21
-#define IRQ_IRDA				22
-#define IRQ_RESERVED				23
-#define IRQ_UART_0				24
-#define IRQ_UART_1				25
-#define IRQ_SSP_1				26
-#define IRQ_SSP_2				27
-#define IRQ_I2C					28
-#define IRQ_GEN_RAS_9				29
-#define IRQ_GEN_RAS_10				30
-#define IRQ_GEN_RAS_11				31
-
-/* VIC 2 */
-#define IRQ_APPL_GPT1_1				32
-#define IRQ_APPL_GPT1_2				33
-#define IRQ_APPL_GPT2_1				34
-#define IRQ_APPL_GPT2_2				35
-#define IRQ_APPL_GPIO				36
-#define IRQ_APPL_SSP				37
-#define IRQ_APPL_ADC				38
-#define IRQ_APPL_RESERVED			39
-#define IRQ_AHB_EXP_MASTER			40
-#define IRQ_DDR_CONTROLLER			41
-#define IRQ_BASIC_DMA				42
-#define IRQ_BASIC_RESERVED1			43
-#define IRQ_BASIC_SMI				44
-#define IRQ_BASIC_CLCD				45
-#define IRQ_EXP_AHB_1				46
-#define IRQ_EXP_AHB_2				47
-#define IRQ_BASIC_GPT1_1			48
-#define IRQ_BASIC_GPT1_2			49
-#define IRQ_BASIC_RTC				50
-#define IRQ_BASIC_GPIO				51
-#define IRQ_BASIC_WDT				52
-#define IRQ_BASIC_RESERVED			53
-#define IRQ_AHB_EXP_SLAVE			54
-#define IRQ_GMAC_1				55
-#define IRQ_GMAC_2				56
-#define IRQ_USB_DEV				57
-#define IRQ_USB_H_OHCI_0			58
-#define IRQ_USB_H_EHCI_0			59
-#define IRQ_USB_H_OHCI_1			60
-#define IRQ_USB_H_EHCI_1			61
-#define IRQ_EXP_AHB_3				62
-#define IRQ_EXP_AHB_4				63
 
 #define IRQ_VIC_END				64
 
 /* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE	IRQ_VIC_END
-#define SPEAR_GPIO0_INT_BASE	SPEAR_GPIO_INT_BASE
-#define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
-#define SPEAR_GPIO2_INT_BASE	(SPEAR_GPIO1_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END	(SPEAR_GPIO2_INT_BASE + 8)
-#define VIRTUAL_IRQS		(SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS			(IRQ_VIC_END + VIRTUAL_IRQS)
+#define VIRTUAL_IRQS				24
+#define NR_IRQS					(IRQ_VIC_END + VIRTUAL_IRQS)
 
 #endif	/* __MACH_IRQS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
index 68c20a007b0..2b9aaa6cdd1 100644
--- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h
@@ -14,161 +14,7 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
-
 #define MISC_BASE		IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT		2
-#define CLCD_CLK_MASK		0x3
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		10
-#define GPT2_CLK_SHIFT		11
-#define GPT3_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB		3
-#define UART1_CLK_ENB		4
-#define SSP0_CLK_ENB		5
-#define SSP1_CLK_ENB		6
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FSMC_CLK_ENB		9
-#define FIRDA_CLK_ENB		10
-#define GPT2_CLK_ENB		11
-#define GPT3_CLK_ENB		12
-#define GPIO2_CLK_ENB		13
-#define SSP2_CLK_ENB		14
-#define ADC_CLK_ENB		15
-#define GPT1_CLK_ENB		11
-#define RTC_CLK_ENB		17
-#define GPIO1_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define CLCD_CLK_ENB		22
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH0_CLK_ENB		25
-#define USBH1_CLK_ENB		26
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */
diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h
index 7fd621532de..d278ed047a5 100644
--- a/arch/arm/mach-spear6xx/include/mach/spear.h
+++ b/arch/arm/mach-spear6xx/include/mach/spear.h
@@ -15,69 +15,26 @@
 #define __MACH_SPEAR6XX_H
 
 #include <asm/memory.h>
-#include <mach/spear600.h>
 
-#define SPEAR6XX_ML_SDRAM_BASE		UL(0x00000000)
 /* ICM1 - Low speed connection */
 #define SPEAR6XX_ICM1_BASE		UL(0xD0000000)
-
+#define VA_SPEAR6XX_ICM1_BASE		UL(0xFD000000)
 #define SPEAR6XX_ICM1_UART0_BASE	UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE	IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-
-#define SPEAR6XX_ICM1_UART1_BASE	UL(0xD0080000)
-#define SPEAR6XX_ICM1_SSP0_BASE		UL(0xD0100000)
-#define SPEAR6XX_ICM1_SSP1_BASE		UL(0xD0180000)
-#define SPEAR6XX_ICM1_I2C_BASE		UL(0xD0200000)
-#define SPEAR6XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR6XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR6XX_ICM1_FSMC_BASE		UL(0xD1800000)
-#define SPEAR6XX_ICM1_NAND_BASE		UL(0xD2000000)
-#define SPEAR6XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR0_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR1_BASE		UL(0xD8080000)
-#define SPEAR6XX_ICM2_GPIO_BASE		UL(0xD8100000)
-#define SPEAR6XX_ICM2_SSP2_BASE		UL(0xD8180000)
-#define SPEAR6XX_ICM2_ADC_BASE		UL(0xD8200000)
+#define VA_SPEAR6XX_ICM1_UART0_BASE	(VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
 
 /* ML-1, 2 - Multi Layer CPU Subsystem */
 #define SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 #define SPEAR6XX_CPU_TMR_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_GPIO_BASE		UL(0xF0100000)
-#define SPEAR6XX_CPU_VIC_SEC_BASE	UL(0xF1000000)
-#define VA_SPEAR6XX_CPU_VIC_SEC_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_BASE	UL(0xF1100000)
-#define VA_SPEAR6XX_CPU_VIC_PRI_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE		UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
-#define SPEAR6XX_ICM3_CLCD_BASE		UL(0xFC200000)
+#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR6XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR6XX_ICM3_TMR_BASE		UL(0xFC800000)
-#define SPEAR6XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR6XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR6XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR6XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR6XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR6XX_ICM4_GMAC_BASE		UL(0xE0800000)
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR6XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE	UL(0xE1800000)
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE	UL(0xE2000000)
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR6XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR6XX_ICM1_UART0_BASE
diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h
deleted file mode 100644
index c068cc50b0f..00000000000
--- a/arch/arm/mach-spear6xx/include/mach/spear600.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-spear66xx/include/mach/spear600.h
- *
- * SPEAr600 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR600
-
-#ifndef __MACH_SPEAR600_H
-#define __MACH_SPEAR600_H
-
-#endif /* __MACH_SPEAR600_H */
-
-#endif /* CONFIG_MACH_SPEAR600 */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 2ed8b14c82c..de194dbb837 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -13,41 +13,404 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
+/* dmac device registration */
+static struct pl08x_channel_data spear600_dma_info[] = {
 	{
-		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ext0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
+	.slave_channels = spear600_dma_info,
+	.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xF0000000		0xF0000000
+ * 0xF1000000		0xF1000000
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR6XX_ML_CPU_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+		.length		= 2 * SZ_16M,
+		.type		= MT_DEVICE
+	},	{
+		.virtual	= VA_SPEAR6XX_ICM1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	},
 };
@@ -85,16 +448,24 @@ static void __init spear6xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1);
 }
 
 struct sys_timer spear6xx_timer = {
 	.init = spear6xx_timer_init,
 };
 
+/* Add auxdata to pass platform data */
+struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
+
 static void __init spear600_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear6xx_auxdata_lookup, NULL);
 }
 
 static const char *spear600_dt_board_compat[] = {
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 77d03c1fbd0..f8150155a44 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -605,7 +605,6 @@ static void __init mop500_uart_init(struct device *parent)
 static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_led_dev,
 	&snowball_key_dev,
-	&snowball_sbnet_dev,
 	&ab8500_device,
 };
 
@@ -646,7 +645,6 @@ static void __init mop500_init_machine(void)
 static void __init snowball_init_machine(void)
 {
 	struct device *parent = NULL;
-	int i2c0_devs;
 	int i;
 
 	parent = u8500_init_devices();
@@ -664,11 +662,6 @@ static void __init snowball_init_machine(void)
 	mop500_spi_init(parent);
 	mop500_uart_init(parent);
 
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
@@ -753,9 +746,10 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	{},
 };
 
-static const struct of_device_id u8500_soc_node[] = {
+static const struct of_device_id u8500_local_bus_nodes[] = {
 	/* only create devices below soc node */
 	{ .compatible = "stericsson,db8500", },
+	{ .compatible = "simple-bus"},
 	{ },
 };
 
@@ -766,7 +760,6 @@ static void __init u8500_init_machine(void)
 	int i;
 
 	parent = u8500_init_devices();
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
 	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
 		mop500_platform_devs[i]->dev.parent = parent;
@@ -774,7 +767,7 @@ static void __init u8500_init_machine(void)
 		snowball_platform_devs[i]->dev.parent = parent;
 
 	/* automatically probe child nodes of db8500 device */
-	of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
+	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
 
 	if (of_machine_is_compatible("st-ericsson,mop500")) {
 		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
@@ -784,6 +777,12 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+
+		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+		i2c_register_board_info(2, mop500_i2c2_devices,
+					ARRAY_SIZE(mop500_i2c2_devices));
+
 	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pins_init();
 		platform_add_devices(snowball_platform_devs,
@@ -797,19 +796,21 @@ static void __init u8500_init_machine(void)
 		 * instead.
 		 */
 		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
 		hrefv60_pins_init();
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
 		hrefv60_sdi_init(parent);
+
+		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+		i2c_register_board_info(2, mop500_i2c2_devices,
+					ARRAY_SIZE(mop500_i2c2_devices));
 	}
 	mop500_i2c_init(parent);
 
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 9bd8163896c..f44a12ccddf 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -121,6 +121,12 @@ static struct platform_device *platform_devs[] __initdata = {
 	&db8500_prcmu_device,
 };
 
+static struct platform_device *of_platform_devs[] __initdata = {
+	&u8500_dma40_device,
+	&db8500_pmu_device,
+	&db8500_prcmu_device,
+};
+
 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
@@ -199,10 +205,16 @@ struct device * __init u8500_init_devices(void)
 	platform_device_register_data(parent,
 		"cpufreq-u8500", -1, NULL, 0);
 
-	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
-		platform_devs[i]->dev.parent = parent;
+	for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++)
+		of_platform_devs[i]->dev.parent = parent;
 
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+	/*
+	 * Devices to be DT:ed:
+	 *   u8500_dma40_device  = todo
+	 *   db8500_pmu_device   = todo
+	 *   db8500_prcmu_device = todo
+	 */
+	platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));
 
 	return parent;
 }
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 52e55337aa9..bd8e110cbcc 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -8,6 +8,7 @@
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/smp_twd.h>
 
@@ -41,10 +42,17 @@ static void __init ux500_twd_init(void)
 #define ux500_twd_init()	do { } while(0)
 #endif
 
+const static struct of_device_id prcmu_timer_of_match[] __initconst = {
+	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
+	{ },
+};
+
 static void __init ux500_timer_init(void)
 {
 	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
+	void __iomem *tmp_base;
+	struct device_node *np;
 
 	if (cpu_is_u8500()) {
 		mtu_timer_base = __io_address(U8500_MTU0_BASE);
@@ -53,6 +61,22 @@ static void __init ux500_timer_init(void)
 		ux500_unknown_soc();
 	}
 
+	/* TODO: Once MTU has been DT:ed place code above into else. */
+	if (of_have_populated_dt()) {
+		np = of_find_matching_node(NULL, prcmu_timer_of_match);
+		if (!np)
+			goto dt_fail;
+
+		tmp_base = of_iomap(np, 0);
+		if (!tmp_base)
+			goto dt_fail;
+
+		prcmu_timer_base = tmp_base;
+	}
+
+dt_fail:
+	/* Doing it the old fashioned way. */
+
 	/*
 	 * Here we register the timerblocks active in the system.
 	 * Localtimers (twd) is started when both cpu is up and running.
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 1bb3dbce881..6c066fcb297 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -9,9 +9,10 @@ choice
 	default ARCH_SPEAR3XX
 
 config ARCH_SPEAR3XX
-	bool "SPEAr3XX"
+	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
 	select CPU_ARM926T
+	select USE_OF
 	help
 	  Supports for ARM's SPEAR3XX family
 
diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
index e0f2e5b9530..4af6258d0fe 100644
--- a/arch/arm/plat-spear/Makefile
+++ b/arch/arm/plat-spear/Makefile
@@ -3,6 +3,6 @@
 #
 
 # Common support
-obj-y	:= clock.o restart.o time.o
+obj-y	:= clock.o restart.o time.o pl080.o
 
 obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 02b160a1ec9..ab3de721c5d 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -12,7 +12,7 @@
  */
 
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 		.macro	addruart, rp, rv, tmp
 		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h
deleted file mode 100644
index 70187d763e2..00000000000
--- a/arch/arm/plat-spear/include/plat/hardware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/hardware.h
- *
- * Hardware definitions for SPEAr
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_HARDWARE_H
-#define __PLAT_HARDWARE_H
-
-#endif /* __PLAT_HARDWARE_H */
diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h
new file mode 100644
index 00000000000..e14a3e4932f
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/pl080.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-spear/include/plat/pl080.h
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PL080_H
+#define __PLAT_PL080_H
+
+struct pl08x_dma_chan;
+int pl080_get_signal(struct pl08x_dma_chan *ch);
+void pl080_put_signal(struct pl08x_dma_chan *ch);
+
+#endif /* __PLAT_PL080_H */
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 1bf84527aee..6dd455bafdf 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -13,7 +13,7 @@
 
 #include <linux/io.h>
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #ifndef __PLAT_UNCOMPRESS_H
 #define __PLAT_UNCOMPRESS_H
diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c
new file mode 100644
index 00000000000..a56a067717c
--- /dev/null
+++ b/arch/arm/plat-spear/pl080.c
@@ -0,0 +1,80 @@
+/*
+ * arch/arm/plat-spear/pl080.c
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/bus.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
+
+struct {
+	unsigned char busy;
+	unsigned char val;
+} signals[16] = {{0, 0}, };
+
+int pl080_get_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned int signal = cd->min_signal, val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* Return if signal is already acquired by somebody else */
+	if (signals[signal].busy &&
+			(signals[signal].val != cd->muxval)) {
+		spin_unlock_irqrestore(&lock, flags);
+		return -EBUSY;
+	}
+
+	/* If acquiring for the first time, configure it */
+	if (!signals[signal].busy) {
+		val = readl(DMA_CHN_CFG);
+
+		/*
+		 * Each request line has two bits in DMA_CHN_CFG register. To
+		 * goto the bits of current request line, do left shift of
+		 * value by 2 * signal number.
+		 */
+		val &= ~(0x3 << (signal * 2));
+		val |= cd->muxval << (signal * 2);
+		writel(val, DMA_CHN_CFG);
+	}
+
+	signals[signal].busy++;
+	signals[signal].val = cd->muxval;
+	spin_unlock_irqrestore(&lock, flags);
+
+	return signal;
+}
+
+void pl080_put_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* if signal is not used */
+	if (!signals[cd->min_signal].busy)
+		BUG();
+
+	signals[cd->min_signal].busy--;
+
+	spin_unlock_irqrestore(&lock, flags);
+}
diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
index 16f203e78d8..4471a232713 100644
--- a/arch/arm/plat-spear/restart.c
+++ b/arch/arm/plat-spear/restart.c
@@ -13,7 +13,7 @@
 #include <linux/io.h>
 #include <asm/system_misc.h>
 #include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 #include <mach/generic.h>
 
 void spear_restart(char mode, const char *cmd)
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index abb5bdecd50..a3164d1647f 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -15,14 +15,13 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 /*
  * We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -175,7 +174,7 @@ static struct irqaction spear_timer_irq = {
 	.handler = spear_timer_interrupt
 };
 
-static void __init spear_clockevent_init(void)
+static void __init spear_clockevent_init(int irq)
 {
 	u32 tick_rate;
 
@@ -195,19 +194,19 @@ static void __init spear_clockevent_init(void)
 
 	clockevents_register_device(&clkevt);
 
-	setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+	setup_irq(irq, &spear_timer_irq);
 }
 
-void __init spear_setup_timer(void)
+void __init spear_setup_timer(resource_size_t base, int irq)
 {
 	int ret;
 
-	if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
+	if (!request_mem_region(base, SZ_1K, "gpt0")) {
 		pr_err("%s:cannot get IO addr\n", __func__);
 		return;
 	}
 
-	gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+	gpt_base = ioremap(base, SZ_1K);
 	if (!gpt_base) {
 		pr_err("%s:ioremap failed for gpt\n", __func__);
 		goto err_mem;
@@ -225,7 +224,7 @@ void __init spear_setup_timer(void)
 		goto err_clk;
 	}
 
-	spear_clockevent_init();
+	spear_clockevent_init(irq);
 	spear_clocksource_init();
 
 	return;
@@ -235,5 +234,5 @@ err_clk:
 err_iomap:
 	iounmap(gpt_base);
 err_mem:
-	release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
+	release_mem_region(base, SZ_1K);
 }
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index fc3ace3fd4c..58a6a63a6ec 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -11,13 +11,17 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
@@ -56,6 +60,10 @@
 
 int pxa_last_gpio;
 
+#ifdef CONFIG_OF
+static struct irq_domain *domain;
+#endif
+
 struct pxa_gpio_chip {
 	struct gpio_chip chip;
 	void __iomem	*regbase;
@@ -81,7 +89,6 @@ enum {
 	PXA3XX_GPIO,
 	PXA93X_GPIO,
 	MMP_GPIO = 0x10,
-	MMP2_GPIO,
 };
 
 static DEFINE_SPINLOCK(gpio_lock);
@@ -475,22 +482,92 @@ static int pxa_gpio_nums(void)
 		gpio_type = MMP_GPIO;
 	} else if (cpu_is_mmp2()) {
 		count = 191;
-		gpio_type = MMP2_GPIO;
+		gpio_type = MMP_GPIO;
 	}
 #endif /* CONFIG_ARCH_MMP */
 	return count;
 }
 
+static struct of_device_id pxa_gpio_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-gpio" },
+	{ .compatible = "mrvl,mmp-gpio", .data = (void *)MMP_GPIO },
+	{}
+};
+
+static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+				 handle_edge_irq);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	return 0;
+}
+
+const struct irq_domain_ops pxa_irq_domain_ops = {
+	.map	= pxa_irq_domain_map,
+};
+
+#ifdef CONFIG_OF
+static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev)
+{
+	int ret, nr_banks, nr_gpios, irq_base;
+	struct device_node *prev, *next, *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+				of_match_device(pxa_gpio_dt_ids, &pdev->dev);
+
+	if (!of_id) {
+		dev_err(&pdev->dev, "Failed to find gpio controller\n");
+		return -EFAULT;
+	}
+	gpio_type = (int)of_id->data;
+
+	next = of_get_next_child(np, NULL);
+	prev = next;
+	if (!next) {
+		dev_err(&pdev->dev, "Failed to find child gpio node\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	for (nr_banks = 1; ; nr_banks++) {
+		next = of_get_next_child(np, prev);
+		if (!next)
+			break;
+		prev = next;
+	}
+	of_node_put(prev);
+	nr_gpios = nr_banks << 5;
+	pxa_last_gpio = nr_gpios - 1;
+
+	irq_base = irq_alloc_descs(-1, 0, nr_gpios, 0);
+	if (irq_base < 0) {
+		dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
+		goto err;
+	}
+	domain = irq_domain_add_legacy(np, nr_gpios, irq_base, 0,
+				       &pxa_irq_domain_ops, NULL);
+	return 0;
+err:
+	iounmap(gpio_reg_base);
+	return ret;
+}
+#else
+#define pxa_gpio_probe_dt(pdev)		(-1)
+#endif
+
 static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 {
 	struct pxa_gpio_chip *c;
 	struct resource *res;
 	struct clk *clk;
 	struct pxa_gpio_platform_data *info;
-	int gpio, irq, ret;
+	int gpio, irq, ret, use_of = 0;
 	int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
 
-	pxa_last_gpio = pxa_gpio_nums();
+	ret = pxa_gpio_probe_dt(pdev);
+	if (ret < 0)
+		pxa_last_gpio = pxa_gpio_nums();
+	else
+		use_of = 1;
 	if (!pxa_last_gpio)
 		return -EINVAL;
 
@@ -545,25 +622,27 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 			writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
 	}
 
+	if (!use_of) {
 #ifdef CONFIG_ARCH_PXA
-	irq = gpio_to_irq(0);
-	irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
-				 handle_edge_irq);
-	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler);
-
-	irq = gpio_to_irq(1);
-	irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
-				 handle_edge_irq);
-	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
-#endif
+		irq = gpio_to_irq(0);
+		irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+					 handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler);
 
-	for (irq  = gpio_to_irq(gpio_offset);
-		irq <= gpio_to_irq(pxa_last_gpio); irq++) {
+		irq = gpio_to_irq(1);
 		irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
 					 handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
+#endif
+
+		for (irq  = gpio_to_irq(gpio_offset);
+			irq <= gpio_to_irq(pxa_last_gpio); irq++) {
+			irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+						 handle_edge_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
 	}
 
 	irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
@@ -574,6 +653,7 @@ static struct platform_driver pxa_gpio_driver = {
 	.probe		= pxa_gpio_probe,
 	.driver		= {
 		.name	= "pxa-gpio",
+		.of_match_table = pxa_gpio_dt_ids,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index eb8ad538c79..99389d2eae5 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -23,16 +23,61 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/of_i2c.h>
+
+#define I2C_PNX_TIMEOUT_DEFAULT		10 /* msec */
+#define I2C_PNX_SPEED_KHZ_DEFAULT	100
+#define I2C_PNX_REGION_SIZE		0x100
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
 
-#include <mach/hardware.h>
-#include <mach/i2c.h>
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
 
-#define I2C_PNX_TIMEOUT		10 /* msec */
-#define I2C_PNX_SPEED_KHZ	100
-#define I2C_PNX_REGION_SIZE	0x100
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
 
-static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+static inline int wait_timeout(struct i2c_pnx_algo_data *data)
 {
+	long timeout = data->timeout;
 	while (timeout > 0 &&
 			(ioread32(I2C_REG_STS(data)) & mstatus_active)) {
 		mdelay(1);
@@ -41,8 +86,9 @@ static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
 	return (timeout <= 0);
 }
 
-static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
+static inline int wait_reset(struct i2c_pnx_algo_data *data)
 {
+	long timeout = data->timeout;
 	while (timeout > 0 &&
 			(ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
 		mdelay(1);
@@ -54,7 +100,7 @@ static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
 static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
 {
 	struct timer_list *timer = &alg_data->mif.timer;
-	unsigned long expires = msecs_to_jiffies(I2C_PNX_TIMEOUT);
+	unsigned long expires = msecs_to_jiffies(alg_data->timeout);
 
 	if (expires <= 1)
 		expires = 2;
@@ -92,7 +138,7 @@ static int i2c_pnx_start(unsigned char slave_addr,
 	}
 
 	/* First, make sure bus is idle */
-	if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
+	if (wait_timeout(alg_data)) {
 		/* Somebody else is monopolizing the bus */
 		dev_err(&alg_data->adapter.dev,
 			"%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n",
@@ -185,7 +231,7 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 		if (alg_data->mif.len == 0) {
 			if (alg_data->last) {
 				/* Wait until the STOP is seen. */
-				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+				if (wait_timeout(alg_data))
 					dev_err(&alg_data->adapter.dev,
 						"The bus is still active after timeout\n");
 			}
@@ -283,7 +329,7 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 		if (alg_data->mif.len == 0) {
 			if (alg_data->last)
 				/* Wait until the STOP is seen. */
-				if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+				if (wait_timeout(alg_data))
 					dev_err(&alg_data->adapter.dev,
 						"The bus is still active after timeout\n");
 
@@ -399,7 +445,7 @@ static void i2c_pnx_timeout(unsigned long data)
 
 	ctl |= mcntrl_reset;
 	iowrite32(ctl, I2C_REG_CTL(alg_data));
-	wait_reset(I2C_PNX_TIMEOUT, alg_data);
+	wait_reset(alg_data);
 	alg_data->mif.ret = -EIO;
 	complete(&alg_data->mif.complete);
 }
@@ -414,18 +460,18 @@ static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
 			alg_data->adapter.name);
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
 			  I2C_REG_CTL(alg_data));
-		wait_reset(I2C_PNX_TIMEOUT, alg_data);
+		wait_reset(alg_data);
 	} else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
 		/* If there is data in the fifo's after transfer,
 		 * flush fifo's by reset.
 		 */
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
 			  I2C_REG_CTL(alg_data));
-		wait_reset(I2C_PNX_TIMEOUT, alg_data);
+		wait_reset(alg_data);
 	} else if (stat & mstatus_nai) {
 		iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
 			  I2C_REG_CTL(alg_data));
-		wait_reset(I2C_PNX_TIMEOUT, alg_data);
+		wait_reset(alg_data);
 	}
 }
 
@@ -568,14 +614,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	int ret = 0;
 	struct i2c_pnx_algo_data *alg_data;
 	unsigned long freq;
-	struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
-
-	if (!i2c_pnx || !i2c_pnx->name) {
-		dev_err(&pdev->dev, "%s: no platform data supplied\n",
-		       __func__);
-		ret = -EINVAL;
-		goto out;
-	}
+	struct resource *res;
+	u32 speed = I2C_PNX_SPEED_KHZ_DEFAULT * 1000;
 
 	alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL);
 	if (!alg_data) {
@@ -585,14 +625,27 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, alg_data);
 
-	strlcpy(alg_data->adapter.name, i2c_pnx->name,
-		sizeof(alg_data->adapter.name));
 	alg_data->adapter.dev.parent = &pdev->dev;
 	alg_data->adapter.algo = &pnx_algorithm;
 	alg_data->adapter.algo_data = alg_data;
 	alg_data->adapter.nr = pdev->id;
-	alg_data->i2c_pnx = i2c_pnx;
 
+	alg_data->timeout = I2C_PNX_TIMEOUT_DEFAULT;
+#ifdef CONFIG_OF
+	alg_data->adapter.dev.of_node = of_node_get(pdev->dev.of_node);
+	if (pdev->dev.of_node) {
+		of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				     &speed);
+		/*
+		 * At this point, it is planned to add an OF timeout property.
+		 * As soon as there is a consensus about how to call and handle
+		 * this, sth. like the following can be put here:
+		 *
+		 * of_property_read_u32(pdev->dev.of_node, "timeout",
+		 *                      &alg_data->timeout);
+		 */
+	}
+#endif
 	alg_data->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(alg_data->clk)) {
 		ret = PTR_ERR(alg_data->clk);
@@ -603,17 +656,27 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	alg_data->mif.timer.function = i2c_pnx_timeout;
 	alg_data->mif.timer.data = (unsigned long)alg_data;
 
+	snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name),
+		 "%s", pdev->name);
+
 	/* Register I/O resource */
-	if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get mem resource.\n");
+		ret = -EBUSY;
+		goto out_clkget;
+	}
+	if (!request_mem_region(res->start, I2C_PNX_REGION_SIZE,
 				pdev->name)) {
 		dev_err(&pdev->dev,
 		       "I/O region 0x%08x for I2C already in use.\n",
-		       i2c_pnx->base);
-		ret = -ENODEV;
+		       res->start);
+		ret = -ENOMEM;
 		goto out_clkget;
 	}
 
-	alg_data->ioaddr = ioremap(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+	alg_data->base = res->start;
+	alg_data->ioaddr = ioremap(res->start, I2C_PNX_REGION_SIZE);
 	if (!alg_data->ioaddr) {
 		dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
 		ret = -ENOMEM;
@@ -637,20 +700,25 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	 * the deglitching filter length.
 	 */
 
-	tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+	tmp = (freq / speed) / 2 - 2;
 	if (tmp > 0x3FF)
 		tmp = 0x3FF;
 	iowrite32(tmp, I2C_REG_CKH(alg_data));
 	iowrite32(tmp, I2C_REG_CKL(alg_data));
 
 	iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
-	if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
+	if (wait_reset(alg_data)) {
 		ret = -ENODEV;
 		goto out_clock;
 	}
 	init_completion(&alg_data->mif.complete);
 
-	ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
+	alg_data->irq = platform_get_irq(pdev, 0);
+	if (alg_data->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n");
+		goto out_irq;
+	}
+	ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
 			0, pdev->name, alg_data);
 	if (ret)
 		goto out_clock;
@@ -662,39 +730,39 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 		goto out_irq;
 	}
 
+	of_i2c_register_devices(&alg_data->adapter);
+
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
-	       alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq);
+		alg_data->adapter.name, res->start, alg_data->irq);
 
 	return 0;
 
 out_irq:
-	free_irq(i2c_pnx->irq, alg_data);
+	free_irq(alg_data->irq, alg_data);
 out_clock:
 	clk_disable(alg_data->clk);
 out_unmap:
 	iounmap(alg_data->ioaddr);
 out_release:
-	release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+	release_mem_region(res->start, I2C_PNX_REGION_SIZE);
 out_clkget:
 	clk_put(alg_data->clk);
 out_drvdata:
 	kfree(alg_data);
 err_kzalloc:
 	platform_set_drvdata(pdev, NULL);
-out:
 	return ret;
 }
 
 static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 {
 	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
-	struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx;
 
-	free_irq(i2c_pnx->irq, alg_data);
+	free_irq(alg_data->irq, alg_data);
 	i2c_del_adapter(&alg_data->adapter);
 	clk_disable(alg_data->clk);
 	iounmap(alg_data->ioaddr);
-	release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE);
+	release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE);
 	clk_put(alg_data->clk);
 	kfree(alg_data);
 	platform_set_drvdata(pdev, NULL);
@@ -702,10 +770,19 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pnx_of_match[] = {
+	{ .compatible = "nxp,pnx-i2c" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, i2c_pnx_of_match);
+#endif
+
 static struct platform_driver i2c_pnx_driver = {
 	.driver = {
 		.name = "pnx-i2c",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(i2c_pnx_of_match),
 	},
 	.probe = i2c_pnx_probe,
 	.remove = __devexit_p(i2c_pnx_remove),
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index d3469d8e3f0..8d2666fcffd 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -40,6 +40,7 @@
 #include <linux/skbuff.h>
 #include <linux/phy.h>
 #include <linux/dma-mapping.h>
+#include <linux/of.h>
 #include <linux/of_net.h>
 #include <linux/types.h>
 
@@ -340,13 +341,17 @@
  */
 #define LPC_POWERDOWN_MACAHB			(1 << 31)
 
-/* Upon the upcoming introduction of device tree usage in LPC32xx,
- * lpc_phy_interface_mode() and use_iram_for_net() will be extended with a
- * device parameter for access to device tree information at runtime, instead
- * of defining the values at compile time
- */
-static inline phy_interface_t lpc_phy_interface_mode(void)
+static phy_interface_t lpc_phy_interface_mode(struct device *dev)
 {
+	if (dev && dev->of_node) {
+		const char *mode = of_get_property(dev->of_node,
+						   "phy-mode", NULL);
+		if (mode && !strcmp(mode, "mii"))
+			return PHY_INTERFACE_MODE_MII;
+		return PHY_INTERFACE_MODE_RMII;
+	}
+
+	/* non-DT */
 #ifdef CONFIG_ARCH_LPC32XX_MII_SUPPORT
 	return PHY_INTERFACE_MODE_MII;
 #else
@@ -354,12 +359,16 @@ static inline phy_interface_t lpc_phy_interface_mode(void)
 #endif
 }
 
-static inline int use_iram_for_net(void)
+static bool use_iram_for_net(struct device *dev)
 {
+	if (dev && dev->of_node)
+		return of_property_read_bool(dev->of_node, "use-iram");
+
+	/* non-DT */
 #ifdef CONFIG_ARCH_LPC32XX_IRAM_FOR_NET
-	return 1;
+	return true;
 #else
-	return 0;
+	return false;
 #endif
 }
 
@@ -664,7 +673,7 @@ static void __lpc_eth_init(struct netdata_local *pldat)
 	       LPC_ENET_CLRT(pldat->net_base));
 	writel(LPC_IPGR_LOAD_PART2(0x12), LPC_ENET_IPGR(pldat->net_base));
 
-	if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+	if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
 		writel(LPC_COMMAND_PASSRUNTFRAME,
 		       LPC_ENET_COMMAND(pldat->net_base));
 	else {
@@ -804,12 +813,13 @@ static int lpc_mii_probe(struct net_device *ndev)
 	}
 
 	/* Attach to the PHY */
-	if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+	if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
 		netdev_info(ndev, "using MII interface\n");
 	else
 		netdev_info(ndev, "using RMII interface\n");
 	phydev = phy_connect(ndev, dev_name(&phydev->dev),
-		&lpc_handle_link_change, 0, lpc_phy_interface_mode());
+			     &lpc_handle_link_change, 0,
+			     lpc_phy_interface_mode(&pldat->pdev->dev));
 
 	if (IS_ERR(phydev)) {
 		netdev_err(ndev, "Could not attach to PHY\n");
@@ -843,7 +853,7 @@ static int lpc_mii_init(struct netdata_local *pldat)
 	}
 
 	/* Setup MII mode */
-	if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
+	if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
 		writel(LPC_COMMAND_PASSRUNTFRAME,
 		       LPC_ENET_COMMAND(pldat->net_base));
 	else {
@@ -1315,18 +1325,26 @@ static const struct net_device_ops lpc_netdev_ops = {
 static int lpc_eth_drv_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	struct resource *dma_res;
 	struct net_device *ndev;
 	struct netdata_local *pldat;
 	struct phy_device *phydev;
 	dma_addr_t dma_handle;
 	int irq, ret;
+	u32 tmp;
+
+	/* Setup network interface for RMII or MII mode */
+	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+	if (lpc_phy_interface_mode(&pdev->dev) == PHY_INTERFACE_MODE_MII)
+		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
+	else
+		tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
 
 	/* Get platform resources */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	irq = platform_get_irq(pdev, 0);
-	if ((!res) || (!dma_res) || (irq < 0) || (irq >= NR_IRQS)) {
+	if ((!res) || (irq < 0) || (irq >= NR_IRQS)) {
 		dev_err(&pdev->dev, "error getting resources.\n");
 		ret = -ENXIO;
 		goto err_exit;
@@ -1389,17 +1407,19 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
 		sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t));
 	pldat->dma_buff_base_v = 0;
 
-	if (use_iram_for_net()) {
-		dma_handle = dma_res->start;
+	if (use_iram_for_net(&pldat->pdev->dev)) {
+		dma_handle = LPC32XX_IRAM_BASE;
 		if (pldat->dma_buff_size <= lpc32xx_return_iram_size())
 			pldat->dma_buff_base_v =
-				io_p2v(dma_res->start);
+				io_p2v(LPC32XX_IRAM_BASE);
 		else
 			netdev_err(ndev,
 				"IRAM not big enough for net buffers, using SDRAM instead.\n");
 	}
 
 	if (pldat->dma_buff_base_v == 0) {
+		pldat->pdev->dev.coherent_dma_mask = 0xFFFFFFFF;
+		pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask;
 		pldat->dma_buff_size = PAGE_ALIGN(pldat->dma_buff_size);
 
 		/* Allocate a chunk of memory for the DMA ethernet buffers
@@ -1488,7 +1508,7 @@ err_out_unregister_netdev:
 	platform_set_drvdata(pdev, NULL);
 	unregister_netdev(ndev);
 err_out_dma_unmap:
-	if (!use_iram_for_net() ||
+	if (!use_iram_for_net(&pldat->pdev->dev) ||
 	    pldat->dma_buff_size > lpc32xx_return_iram_size())
 		dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
 				  pldat->dma_buff_base_v,
@@ -1515,7 +1535,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev)
 	unregister_netdev(ndev);
 	platform_set_drvdata(pdev, NULL);
 
-	if (!use_iram_for_net() ||
+	if (!use_iram_for_net(&pldat->pdev->dev) ||
 	    pldat->dma_buff_size > lpc32xx_return_iram_size())
 		dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
 				  pldat->dma_buff_base_v,
@@ -1584,6 +1604,14 @@ static int lpc_eth_drv_resume(struct platform_device *pdev)
 }
 #endif
 
+#ifdef CONFIG_OF
+static const struct of_device_id lpc_eth_match[] = {
+	{ .compatible = "nxp,lpc-eth" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpc_eth_match);
+#endif
+
 static struct platform_driver lpc_eth_driver = {
 	.probe		= lpc_eth_drv_probe,
 	.remove		= __devexit_p(lpc_eth_drv_remove),
@@ -1593,6 +1621,7 @@ static struct platform_driver lpc_eth_driver = {
 #endif
 	.driver		= {
 		.name	= MODNAME,
+		.of_match_table = of_match_ptr(lpc_eth_match),
 	},
 };
 
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 66d96f14c27..7e262a6124c 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -1,4 +1,5 @@
 
+#include <linux/device.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/module.h>
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index a87124d4d53..1bc74afe7a3 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -29,14 +29,10 @@ struct i2c_pnx_algo_data {
 	struct i2c_pnx_mif	mif;
 	int			last;
 	struct clk		*clk;
-	struct i2c_pnx_data	*i2c_pnx;
 	struct i2c_adapter	adapter;
-};
-
-struct i2c_pnx_data {
-	const char *name;
-	u32 base;
-	int irq;
+	phys_addr_t		base;
+	int			irq;
+	u32			timeout;
 };
 
 #endif /* __I2C_PNX_H__ */