PCI hotplug: shpchp: replace printk with dev_printk

This patch replaces printks within shpchp module with dev_printks.

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

5 files changed, 224 insertions, 159 deletions

diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index 4d9fed00e1d..0d48d38cbf4 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -59,6 +59,20 @@ extern struct workqueue_struct *shpchp_wq;
 #define warn(format, arg...)						\
 	printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
+#define ctrl_dbg(ctrl, format, arg...)					\
+	do {								\
+		if (shpchp_debug)					\
+			dev_printk(, &ctrl->pci_dev->dev,		\
+					format, ## arg);		\
+	} while (0)
+#define ctrl_err(ctrl, format, arg...)					\
+	dev_err(&ctrl->pci_dev->dev, format, ## arg)
+#define ctrl_info(ctrl, format, arg...)					\
+	dev_info(&ctrl->pci_dev->dev, format, ## arg)
+#define ctrl_warn(ctrl, format, arg...)					\
+	dev_warn(&ctrl->pci_dev->dev, format, ## arg)
+
+
 #define SLOT_NAME_SIZE 10
 struct slot {
 	u8 bus;
@@ -239,7 +253,7 @@ static inline struct slot *shpchp_find_slot(struct controller *ctrl, u8 device)
 			return slot;
 	}
 
-	err("%s: slot (device=0x%x) not found\n", __func__, device);
+	ctrl_err(ctrl, "%s: slot (device=0x%x) not found\n", __func__, device);
 	return NULL;
 }
 
@@ -273,7 +287,9 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
 	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg);
 	perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
 	if (perr_set) {
-		dbg ("%s  W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__func__ , perr_set);
+		ctrl_dbg(p_slot->ctrl,
+			 "%s  W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",
+			 __func__ , perr_set);
 
 		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
 	}
@@ -282,7 +298,8 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
 	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
 	rse_set = pcix_mem_base_reg & RSE_MASK;
 	if (rse_set) {
-		dbg ("%s  W1C: Memory_Base_Limit[ RSE ]\n",__func__ );
+		ctrl_dbg(p_slot->ctrl, "%s  W1C: Memory_Base_Limit[ RSE ]\n",
+			 __func__);
 
 		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
 	}
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 7af9191df4d..214633bf4ab 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -89,7 +89,8 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	kfree(slot->hotplug_slot->info);
 	kfree(slot->hotplug_slot);
@@ -135,13 +136,14 @@ static int init_slots(struct controller *ctrl)
 		snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
 		hotplug_slot->ops = &shpchp_hotplug_slot_ops;
 
-		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
-		    "slot_device_offset=%x\n", slot->bus, slot->device,
-		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
+		ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x "
+			 "slot_device_offset=%x\n", slot->bus, slot->device,
+			 slot->hp_slot, slot->number, ctrl->slot_device_offset);
 		retval = pci_hp_register(slot->hotplug_slot,
 				ctrl->pci_dev->subordinate, slot->device, name);
 		if (retval) {
-			err("pci_hp_register failed with error %d\n", retval);
+			ctrl_err(ctrl, "pci_hp_register failed with error %d\n",
+				 retval);
 			goto error_info;
 		}
 
@@ -187,7 +189,8 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	hotplug_slot->info->attention_status = status;
 	slot->hpc_ops->set_attention_status(slot, status);
@@ -199,7 +202,8 @@ static int enable_slot (struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	return shpchp_sysfs_enable_slot(slot);
 }
@@ -208,7 +212,8 @@ static int disable_slot (struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = get_slot(hotplug_slot);
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	return shpchp_sysfs_disable_slot(slot);
 }
@@ -218,7 +223,8 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_power_status(slot, value);
 	if (retval < 0)
@@ -232,7 +238,8 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_attention_status(slot, value);
 	if (retval < 0)
@@ -246,7 +253,8 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_latch_status(slot, value);
 	if (retval < 0)
@@ -260,7 +268,8 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_adapter_status(slot, value);
 	if (retval < 0)
@@ -275,7 +284,8 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot,
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_max_bus_speed(slot, value);
 	if (retval < 0)
@@ -289,7 +299,8 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
 	struct slot *slot = get_slot(hotplug_slot);
 	int retval;
 
-	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
+	ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n",
+		 __func__, slot_name(slot));
 
 	retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
 	if (retval < 0)
@@ -320,15 +331,14 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl) {
-		err("%s : out of memory\n", __func__);
+		dev_err(&pdev->dev, "%s : out of memory\n", __func__);
 		goto err_out_none;
 	}
 	INIT_LIST_HEAD(&ctrl->slot_list);
 
 	rc = shpc_init(ctrl, pdev);
 	if (rc) {
-		dbg("%s: controller initialization failed\n",
-		    SHPC_MODULE_NAME);
+		ctrl_dbg(ctrl, "controller initialization failed\n");
 		goto err_out_free_ctrl;
 	}
 
@@ -337,7 +347,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* Setup the slot information structures */
 	rc = init_slots(ctrl);
 	if (rc) {
-		err("%s: slot initialization failed\n", SHPC_MODULE_NAME);
+		ctrl_err(ctrl, "slot initialization failed\n");
 		goto err_out_release_ctlr;
 	}
 
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 919b1ee4431..c9049f17864 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -62,7 +62,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
 	u32 event_type;
 
 	/* Attention Button Change */
-	dbg("shpchp:  Attention button interrupt received.\n");
+	ctrl_dbg(ctrl, "Attention button interrupt received.\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
@@ -70,7 +70,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
 	/*
 	 *  Button pressed - See if need to TAKE ACTION!!!
 	 */
-	info("Button pressed on Slot(%s)\n", slot_name(p_slot));
+	ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot));
 	event_type = INT_BUTTON_PRESS;
 
 	queue_interrupt_event(p_slot, event_type);
@@ -86,29 +86,29 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
 	u32 event_type;
 
 	/* Switch Change */
-	dbg("shpchp:  Switch interrupt received.\n");
+	ctrl_dbg(ctrl, "Switch interrupt received.\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-	dbg("%s: Card present %x Power status %x\n", __func__,
-		p_slot->presence_save, p_slot->pwr_save);
+	ctrl_dbg(ctrl, "%s: Card present %x Power status %x\n",
+		 __func__, p_slot->presence_save, p_slot->pwr_save);
 
 	if (getstatus) {
 		/*
 		 * Switch opened
 		 */
-		info("Latch open on Slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_SWITCH_OPEN;
 		if (p_slot->pwr_save && p_slot->presence_save) {
 			event_type = INT_POWER_FAULT;
-			err("Surprise Removal of card\n");
+			ctrl_err(ctrl, "Surprise Removal of card\n");
 		}
 	} else {
 		/*
 		 *  Switch closed
 		 */
-		info("Latch close on Slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_SWITCH_CLOSE;
 	}
 
@@ -123,7 +123,7 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
 	u32 event_type;
 
 	/* Presence Change */
-	dbg("shpchp:  Presence/Notify input change.\n");
+	ctrl_dbg(ctrl, "Presence/Notify input change.\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
@@ -135,13 +135,15 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
 		/*
 		 * Card Present
 		 */
-		info("Card present on Slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Card present on Slot(%s)\n",
+			  slot_name(p_slot));
 		event_type = INT_PRESENCE_ON;
 	} else {
 		/*
 		 * Not Present
 		 */
-		info("Card not present on Slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Card not present on Slot(%s)\n",
+			  slot_name(p_slot));
 		event_type = INT_PRESENCE_OFF;
 	}
 
@@ -156,7 +158,7 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
 	u32 event_type;
 
 	/* Power fault */
-	dbg("shpchp:  Power fault interrupt received.\n");
+	ctrl_dbg(ctrl, "Power fault interrupt received.\n");
 
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
@@ -164,18 +166,19 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
 		/*
 		 * Power fault Cleared
 		 */
-		info("Power fault cleared on Slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n",
+			  slot_name(p_slot));
 		p_slot->status = 0x00;
 		event_type = INT_POWER_FAULT_CLEAR;
 	} else {
 		/*
 		 *   Power fault
 		 */
-		info("Power fault on Slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot));
 		event_type = INT_POWER_FAULT;
 		/* set power fault status for this board */
 		p_slot->status = 0xFF;
-		info("power fault bit %x set\n", hp_slot);
+		ctrl_info(ctrl, "power fault bit %x set\n", hp_slot);
 	}
 
 	queue_interrupt_event(p_slot, event_type);
@@ -191,10 +194,10 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
 {
 	int rc = 0;
 
-	dbg("%s: change to speed %d\n", __func__, speed);
+	ctrl_dbg(ctrl, "%s: change to speed %d\n", __func__, speed);
 	if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
-		err("%s: Issue of set bus speed mode command failed\n",
-		    __func__);
+		ctrl_err(ctrl, "%s: Issue of set bus speed mode command "
+			 "failed\n", __func__);
 		return WRONG_BUS_FREQUENCY;
 	}
 	return rc;
@@ -212,8 +215,8 @@ static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
 	 */
 	if (flag) {
 		if (asp < bsp) {
-			err("%s: speed of bus %x and adapter %x mismatch\n",
-			    __func__, bsp, asp);
+			ctrl_err(ctrl, "%s: speed of bus %x and adapter %x "
+				 "mismatch\n", __func__, bsp, asp);
 			rc = WRONG_BUS_FREQUENCY;
 		}
 		return rc;
@@ -246,14 +249,14 @@ static int board_added(struct slot *p_slot)
 
 	hp_slot = p_slot->device - ctrl->slot_device_offset;
 
-	dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
-			__func__, p_slot->device,
-			ctrl->slot_device_offset, hp_slot);
+	ctrl_dbg(ctrl,
+		 "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
+		 __func__, p_slot->device, ctrl->slot_device_offset, hp_slot);
 
 	/* Power on slot without connecting to bus */
 	rc = p_slot->hpc_ops->power_on_slot(p_slot);
 	if (rc) {
-		err("%s: Failed to power on slot\n", __func__);
+		ctrl_err(ctrl, "%s: Failed to power on slot\n", __func__);
 		return -1;
 	}
 
@@ -262,33 +265,36 @@ static int board_added(struct slot *p_slot)
 			return WRONG_BUS_FREQUENCY;
 
 		if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
-			err("%s: Issue of set bus speed mode command failed\n", __func__);
+			ctrl_err(ctrl, "%s: Issue of set bus speed mode command"
+				 " failed\n", __func__);
 			return WRONG_BUS_FREQUENCY;
 		}
 
 		/* turn on board, blink green LED, turn off Amber LED */
 		if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
-			err("%s: Issue of Slot Enable command failed\n", __func__);
+			ctrl_err(ctrl, "%s: Issue of Slot Enable command"
+				 " failed\n", __func__);
 			return rc;
 		}
 	}
 
 	rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
 	if (rc) {
-		err("%s: Can't get adapter speed or bus mode mismatch\n",
-		    __func__);
+		ctrl_err(ctrl, "%s: Can't get adapter speed or bus mode "
+			 "mismatch\n", __func__);
 		return WRONG_BUS_FREQUENCY;
 	}
 
 	rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
 	if (rc) {
-		err("%s: Can't get bus operation speed\n", __func__);
+		ctrl_err(ctrl, "%s: Can't get bus operation speed\n", __func__);
 		return WRONG_BUS_FREQUENCY;
 	}
 
 	rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
 	if (rc) {
-		err("%s: Can't get max bus operation speed\n", __func__);
+		ctrl_err(ctrl, "%s: Can't get max bus operation speed\n",
+			 __func__);
 		msp = bsp;
 	}
 
@@ -296,9 +302,9 @@ static int board_added(struct slot *p_slot)
 	if (!list_empty(&ctrl->pci_dev->subordinate->devices))
 		slots_not_empty = 1;
 
-	dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, "
-	    "max_bus_speed %d\n", __func__, slots_not_empty, asp,
-	    bsp, msp);
+	ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d,"
+		 " max_bus_speed %d\n", __func__, slots_not_empty, asp,
+		 bsp, msp);
 
 	rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
 	if (rc)
@@ -306,26 +312,27 @@ static int board_added(struct slot *p_slot)
 
 	/* turn on board, blink green LED, turn off Amber LED */
 	if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
-		err("%s: Issue of Slot Enable command failed\n", __func__);
+		ctrl_err(ctrl, "%s: Issue of Slot Enable command failed\n",
+			 __func__);
 		return rc;
 	}
 
 	/* Wait for ~1 second */
 	msleep(1000);
 
-	dbg("%s: slot status = %x\n", __func__, p_slot->status);
+	ctrl_dbg(ctrl, "%s: slot status = %x\n", __func__, p_slot->status);
 	/* Check for a power fault */
 	if (p_slot->status == 0xFF) {
 		/* power fault occurred, but it was benign */
-		dbg("%s: power fault\n", __func__);
+		ctrl_dbg(ctrl, "%s: power fault\n", __func__);
 		rc = POWER_FAILURE;
 		p_slot->status = 0;
 		goto err_exit;
 	}
 
 	if (shpchp_configure_device(p_slot)) {
-		err("Cannot add device at 0x%x:0x%x\n", p_slot->bus,
-				p_slot->device);
+		ctrl_err(ctrl, "Cannot add device at 0x%x:0x%x\n",
+			 p_slot->bus, p_slot->device);
 		goto err_exit;
 	}
 
@@ -341,7 +348,8 @@ err_exit:
 	/* turn off slot, turn on Amber LED, turn off Green LED */
 	rc = p_slot->hpc_ops->slot_disable(p_slot);
 	if (rc) {
-		err("%s: Issue of Slot Disable command failed\n", __func__);
+		ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n",
+			 __func__);
 		return rc;
 	}
 
@@ -365,7 +373,7 @@ static int remove_board(struct slot *p_slot)
 	hp_slot = p_slot->device - ctrl->slot_device_offset;
 	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
 
-	dbg("In %s, hp_slot = %d\n", __func__, hp_slot);
+	ctrl_dbg(ctrl, "In %s, hp_slot = %d\n", __func__, hp_slot);
 
 	/* Change status to shutdown */
 	if (p_slot->is_a_board)
@@ -374,13 +382,15 @@ static int remove_board(struct slot *p_slot)
 	/* turn off slot, turn on Amber LED, turn off Green LED */
 	rc = p_slot->hpc_ops->slot_disable(p_slot);
 	if (rc) {
-		err("%s: Issue of Slot Disable command failed\n", __func__);
+		ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n",
+			 __func__);
 		return rc;
 	}
 
 	rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
 	if (rc) {
-		err("%s: Issue of Set Attention command failed\n", __func__);
+		ctrl_err(ctrl, "%s: Issue of Set Attention command failed\n",
+			 __func__);
 		return rc;
 	}
 
@@ -439,7 +449,8 @@ void shpchp_queue_pushbutton_work(struct work_struct *work)
 
 	info = kmalloc(sizeof(*info), GFP_KERNEL);
 	if (!info) {
-		err("%s: Cannot allocate memory\n", __func__);
+		ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n",
+			 __func__);
 		return;
 	}
 	info->p_slot = p_slot;
@@ -486,18 +497,19 @@ static int update_slot_info (struct slot *slot)
 static void handle_button_press_event(struct slot *p_slot)
 {
 	u8 getstatus;
+	struct controller *ctrl = p_slot->ctrl;
 
 	switch (p_slot->state) {
 	case STATIC_STATE:
 		p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 		if (getstatus) {
 			p_slot->state = BLINKINGOFF_STATE;
-			info("PCI slot #%s - powering off due to button "
-			     "press.\n", slot_name(p_slot));
+			ctrl_info(ctrl, "PCI slot #%s - powering off due to "
+				  "button press.\n", slot_name(p_slot));
 		} else {
 			p_slot->state = BLINKINGON_STATE;
-			info("PCI slot #%s - powering on due to button "
-			     "press.\n", slot_name(p_slot));
+			ctrl_info(ctrl, "PCI slot #%s - powering on due to "
+				  "button press.\n", slot_name(p_slot));
 		}
 		/* blink green LED and turn off amber */
 		p_slot->hpc_ops->green_led_blink(p_slot);
@@ -512,16 +524,17 @@ static void handle_button_press_event(struct slot *p_slot)
 		 * press the attention again before the 5 sec. limit
 		 * expires to cancel hot-add or hot-remove
 		 */
-		info("Button cancel on Slot(%s)\n", slot_name(p_slot));
-		dbg("%s: button cancel\n", __func__);
+		ctrl_info(ctrl, "Button cancel on Slot(%s)\n",
+			  slot_name(p_slot));
+		ctrl_dbg(ctrl, "%s: button cancel\n", __func__);
 		cancel_delayed_work(&p_slot->work);
 		if (p_slot->state == BLINKINGOFF_STATE)
 			p_slot->hpc_ops->green_led_on(p_slot);
 		else
 			p_slot->hpc_ops->green_led_off(p_slot);
 		p_slot->hpc_ops->set_attention_status(p_slot, 0);
-		info("PCI slot #%s - action canceled due to button press\n",
-		     slot_name(p_slot));
+		ctrl_info(ctrl, "PCI slot #%s - action canceled due to "
+			  "button press\n", slot_name(p_slot));
 		p_slot->state = STATIC_STATE;
 		break;
 	case POWEROFF_STATE:
@@ -531,11 +544,12 @@ static void handle_button_press_event(struct slot *p_slot)
 		 * this means that the previous attention button action
 		 * to hot-add or hot-remove is undergoing
 		 */
-		info("Button ignore on Slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Button ignore on Slot(%s)\n",
+			  slot_name(p_slot));
 		update_slot_info(p_slot);
 		break;
 	default:
-		warn("Not a valid state\n");
+		ctrl_warn(ctrl, "Not a valid state\n");
 		break;
 	}
 }
@@ -551,7 +565,7 @@ static void interrupt_event_handler(struct work_struct *work)
 		handle_button_press_event(p_slot);
 		break;
 	case INT_POWER_FAULT:
-		dbg("%s: power fault\n", __func__);
+		ctrl_dbg(p_slot->ctrl, "%s: power fault\n", __func__);
 		p_slot->hpc_ops->set_attention_status(p_slot, 1);
 		p_slot->hpc_ops->green_led_off(p_slot);
 		break;
@@ -569,22 +583,24 @@ static int shpchp_enable_slot (struct slot *p_slot)
 {
 	u8 getstatus = 0;
 	int rc, retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	/* Check to see if (latch closed, card present, power off) */
 	mutex_lock(&p_slot->ctrl->crit_sect);
 	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
 	if (rc || !getstatus) {
-		info("No adapter on slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (rc || getstatus) {
-		info("Latch open on slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (rc || getstatus) {
-		info("Already enabled on slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Already enabled on slot(%s)\n",
+			  slot_name(p_slot));
 		goto out;
 	}
 
@@ -593,7 +609,7 @@ static int shpchp_enable_slot (struct slot *p_slot)
 	/* We have to save the presence info for these slots */
 	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
 	p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
-	dbg("%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
+	ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 
 	if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
@@ -624,6 +640,7 @@ static int shpchp_disable_slot (struct slot *p_slot)
 {
 	u8 getstatus = 0;
 	int rc, retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	if (!p_slot->ctrl)
 		return -ENODEV;
@@ -633,17 +650,18 @@ static int shpchp_disable_slot (struct slot *p_slot)
 
 	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
 	if (rc || !getstatus) {
-		info("No adapter on slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 	if (rc || getstatus) {
-		info("Latch open on slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot));
 		goto out;
 	}
 	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
 	if (rc || !getstatus) {
-		info("Already disabled slot(%s)\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Already disabled slot(%s)\n",
+			  slot_name(p_slot));
 		goto out;
 	}
 
@@ -657,6 +675,7 @@ static int shpchp_disable_slot (struct slot *p_slot)
 int shpchp_sysfs_enable_slot(struct slot *p_slot)
 {
 	int retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	mutex_lock(&p_slot->lock);
 	switch (p_slot->state) {
@@ -670,15 +689,17 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot)
 		p_slot->state = STATIC_STATE;
 		break;
 	case POWERON_STATE:
-		info("Slot %s is already in powering on state\n",
-		     slot_name(p_slot));
+		ctrl_info(ctrl, "Slot %s is already in powering on state\n",
+			  slot_name(p_slot));
 		break;
 	case BLINKINGOFF_STATE:
 	case POWEROFF_STATE:
-		info("Already enabled on slot %s\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Already enabled on slot %s\n",
+			  slot_name(p_slot));
 		break;
 	default:
-		err("Not a valid state on slot %s\n", slot_name(p_slot));
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
 		break;
 	}
 	mutex_unlock(&p_slot->lock);
@@ -689,6 +710,7 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot)
 int shpchp_sysfs_disable_slot(struct slot *p_slot)
 {
 	int retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
 
 	mutex_lock(&p_slot->lock);
 	switch (p_slot->state) {
@@ -702,15 +724,17 @@ int shpchp_sysfs_disable_slot(struct slot *p_slot)
 		p_slot->state = STATIC_STATE;
 		break;
 	case POWEROFF_STATE:
-		info("Slot %s is already in powering off state\n",
-		     slot_name(p_slot));
+		ctrl_info(ctrl, "Slot %s is already in powering off state\n",
+			  slot_name(p_slot));
 		break;
 	case BLINKINGON_STATE:
 	case POWERON_STATE:
-		info("Already disabled on slot %s\n", slot_name(p_slot));
+		ctrl_info(ctrl, "Already disabled on slot %s\n",
+			  slot_name(p_slot));
 		break;
 	default:
-		err("Not a valid state on slot %s\n", slot_name(p_slot));
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
 		break;
 	}
 	mutex_unlock(&p_slot->lock);
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 7a0bff364cd..2b69a08326b 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -300,10 +300,10 @@ static inline int shpc_wait_cmd(struct controller *ctrl)
 						!is_ctrl_busy(ctrl), timeout);
 	if (!rc && is_ctrl_busy(ctrl)) {
 		retval = -EIO;
-		err("Command not completed in 1000 msec\n");
+		ctrl_err(ctrl, "Command not completed in 1000 msec\n");
 	} else if (rc < 0) {
 		retval = -EINTR;
-		info("Command was interrupted by a signal\n");
+		ctrl_info(ctrl, "Command was interrupted by a signal\n");
 	}
 
 	return retval;
@@ -320,15 +320,15 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
 
 	if (!shpc_poll_ctrl_busy(ctrl)) {
 		/* After 1 sec and and the controller is still busy */
-		err("%s : Controller is still busy after 1 sec.\n",
-		    __func__);
+		ctrl_err(ctrl, "%s : Controller is still busy after 1 sec.\n",
+			 __func__);
 		retval = -EBUSY;
 		goto out;
 	}
 
 	++t_slot;
 	temp_word =  (t_slot << 8) | (cmd & 0xFF);
-	dbg("%s: t_slot %x cmd %x\n", __func__, t_slot, cmd);
+	ctrl_dbg(ctrl, "%s: t_slot %x cmd %x\n", __func__, t_slot, cmd);
 
 	/* To make sure the Controller Busy bit is 0 before we send out the
 	 * command.
@@ -344,8 +344,8 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
 
 	cmd_status = hpc_check_cmd_status(slot->ctrl);
 	if (cmd_status) {
-		err("%s: Failed to issued command 0x%x (error code = %d)\n",
-		    __func__, cmd, cmd_status);
+		ctrl_err(ctrl, "%s: Failed to issued command 0x%x "
+			 "(error code = %d)\n", __func__, cmd, cmd_status);
 		retval = -EIO;
 	}
  out:
@@ -364,15 +364,15 @@ static int hpc_check_cmd_status(struct controller *ctrl)
 		break;
 	case 1:
 		retval = SWITCH_OPEN;
-		err("%s: Switch opened!\n", __func__);
+		ctrl_err(ctrl, "%s: Switch opened!\n", __func__);
 		break;
 	case 2:
 		retval = INVALID_CMD;
-		err("%s: Invalid HPC command!\n", __func__);
+		ctrl_err(ctrl, "%s: Invalid HPC command!\n", __func__);
 		break;
 	case 4:
 		retval = INVALID_SPEED_MODE;
-		err("%s: Invalid bus speed/mode!\n", __func__);
+		ctrl_err(ctrl, "%s: Invalid bus speed/mode!\n", __func__);
 		break;
 	default:
 		retval = cmd_status;
@@ -483,8 +483,8 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
 		return -ENODEV;
 	}
 
-	dbg("%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
-	    __func__, slot_reg, pcix_cap, m66_cap);
+	ctrl_dbg(ctrl, "%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
+		 __func__, slot_reg, pcix_cap, m66_cap);
 
 	switch (pcix_cap) {
 	case 0x0:
@@ -509,7 +509,7 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
 		break;
 	}
 
-	dbg("Adapter speed = %d\n", *value);
+	ctrl_dbg(ctrl, "Adapter speed = %d\n", *value);
 	return retval;
 }
 
@@ -526,7 +526,7 @@ static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
 		retval = -1;
 	}
 
-	dbg("Mode 1 ECC cap = %d\n", *mode);
+	ctrl_dbg(ctrl, "Mode 1 ECC cap = %d\n", *mode);
 	return retval;
 }
 
@@ -629,7 +629,7 @@ static int hpc_power_on_slot(struct slot * slot)
 
 	retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -642,7 +642,7 @@ static int hpc_slot_enable(struct slot * slot)
 	retval = shpc_write_cmd(slot, slot->hp_slot,
 			SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -655,7 +655,7 @@ static int hpc_slot_disable(struct slot * slot)
 	retval = shpc_write_cmd(slot, slot->hp_slot,
 			SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -719,7 +719,7 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
 
 	retval = shpc_write_cmd(slot, 0, cmd);
 	if (retval)
-		err("%s: Write command failed!\n", __func__);
+		ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
 
 	return retval;
 }
@@ -735,7 +735,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
 	if (!intr_loc)
 		return IRQ_NONE;
 
-	dbg("%s: intr_loc = %x\n",__func__, intr_loc);
+	ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc);
 
 	if(!shpchp_poll_mode) {
 		/*
@@ -748,7 +748,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
 		shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
 
 		intr_loc2 = shpc_readl(ctrl, INTR_LOC);
-		dbg("%s: intr_loc2 = %x\n",__func__, intr_loc2);
+		ctrl_dbg(ctrl, "%s: intr_loc2 = %x\n", __func__, intr_loc2);
 	}
 
 	if (intr_loc & CMD_INTR_PENDING) {
@@ -773,8 +773,8 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
 			continue;
 
 		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
-		dbg("%s: Slot %x with intr, slot register = %x\n",
-		    __func__, hp_slot, slot_reg);
+		ctrl_dbg(ctrl, "%s: Slot %x with intr, slot register = %x\n",
+			 __func__, hp_slot, slot_reg);
 
 		if (slot_reg & MRL_CHANGE_DETECTED)
 			shpchp_handle_switch_change(hp_slot, ctrl);
@@ -843,7 +843,7 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 	}
 
 	*value = bus_speed;
-	dbg("Max bus speed = %d\n", bus_speed);
+	ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
 
 	return retval;
 }
@@ -911,7 +911,7 @@ static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
 		break;
 	}
 
-	dbg("Current bus speed = %d\n", bus_speed);
+	ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed);
 	return retval;
 }
 
@@ -958,34 +958,38 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 	} else {
 		ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
 		if (!ctrl->cap_offset) {
-			err("%s : cap_offset == 0\n", __func__);
+			ctrl_err(ctrl, "%s : cap_offset == 0\n", __func__);
 			goto abort;
 		}
-		dbg("%s: cap_offset = %x\n", __func__, ctrl->cap_offset);
+		ctrl_dbg(ctrl, "%s: cap_offset = %x\n", __func__,
+			 ctrl->cap_offset);
 
 		rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
 		if (rc) {
-			err("%s: cannot read base_offset\n", __func__);
+			ctrl_err(ctrl, "%s: cannot read base_offset\n",
+				 __func__);
 			goto abort;
 		}
 
 		rc = shpc_indirect_read(ctrl, 3, &tempdword);
 		if (rc) {
-			err("%s: cannot read slot config\n", __func__);
+			ctrl_err(ctrl, "%s: cannot read slot config\n",
+				 __func__);
 			goto abort;
 		}
 		num_slots = tempdword & SLOT_NUM;
-		dbg("%s: num_slots (indirect) %x\n", __func__, num_slots);
+		ctrl_dbg(ctrl, "%s: num_slots (indirect) %x\n",
+			 __func__, num_slots);
 
 		for (i = 0; i < 9 + num_slots; i++) {
 			rc = shpc_indirect_read(ctrl, i, &tempdword);
 			if (rc) {
-				err("%s: cannot read creg (index = %d)\n",
-				    __func__, i);
+				ctrl_err(ctrl, "%s: cannot read creg "
+					 "(index = %d)\n", __func__, i);
 				goto abort;
 			}
-			dbg("%s: offset %d: value %x\n", __func__,i,
-					tempdword);
+			ctrl_dbg(ctrl, "%s: offset %d: value %x\n",
+				 __func__, i, tempdword);
 		}
 
 		ctrl->mmio_base =
@@ -993,30 +997,31 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 		ctrl->mmio_size = 0x24 + 0x4 * num_slots;
 	}
 
-	info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
-		pdev->subsystem_device);
+	ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
+		  pdev->vendor, pdev->device, pdev->subsystem_vendor,
+		  pdev->subsystem_device);
 
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		err("%s: pci_enable_device failed\n", __func__);
+		ctrl_err(ctrl, "%s: pci_enable_device failed\n", __func__);
 		goto abort;
 	}
 
 	if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
-		err("%s: cannot reserve MMIO region\n", __func__);
+		ctrl_err(ctrl, "%s: cannot reserve MMIO region\n", __func__);
 		rc = -1;
 		goto abort;
 	}
 
 	ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
 	if (!ctrl->creg) {
-		err("%s: cannot remap MMIO region %lx @ %lx\n", __func__,
-		    ctrl->mmio_size, ctrl->mmio_base);
+		ctrl_err(ctrl, "%s: cannot remap MMIO region %lx @ %lx\n",
+			 __func__, ctrl->mmio_size, ctrl->mmio_base);
 		release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
 		rc = -1;
 		goto abort;
 	}
-	dbg("%s: ctrl->creg %p\n", __func__, ctrl->creg);
+	ctrl_dbg(ctrl, "%s: ctrl->creg %p\n", __func__, ctrl->creg);
 
 	mutex_init(&ctrl->crit_sect);
 	mutex_init(&ctrl->cmd_lock);
@@ -1035,21 +1040,21 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 
 	/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
 	tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
-	dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+	ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
 	tempdword |= (GLOBAL_INTR_MASK  | GLOBAL_SERR_MASK |
 		      COMMAND_INTR_MASK | ARBITER_SERR_MASK);
 	tempdword &= ~SERR_INTR_RSVDZ_MASK;
 	shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
 	tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
-	dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+	ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
 
 	/* Mask the MRL sensor SERR Mask of individual slot in
 	 * Slot SERR-INT Mask & clear all the existing event if any
 	 */
 	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
 		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
-		dbg("%s: Default Logical Slot Register %d value %x\n", __func__,
-			hp_slot, slot_reg);
+		ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d "
+			 "value %x\n", __func__, hp_slot, slot_reg);
 		slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
 			     BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
 			     CON_PFAULT_INTR_MASK   | MRL_CHANGE_SERR_MASK |
@@ -1066,24 +1071,26 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 		/* Installs the interrupt handler */
 		rc = pci_enable_msi(pdev);
 		if (rc) {
-			info("Can't get msi for the hotplug controller\n");
-			info("Use INTx for the hotplug controller\n");
+			ctrl_info(ctrl,
+				  "Can't get msi for the hotplug controller\n");
+			ctrl_info(ctrl,
+				  "Use INTx for the hotplug controller\n");
 		}
 
 		rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
 				 MY_NAME, (void *)ctrl);
-		dbg("%s: request_irq %d for hpc%d (returns %d)\n",
-		    __func__, ctrl->pci_dev->irq,
+		ctrl_dbg(ctrl, "%s: request_irq %d for hpc%d (returns %d)\n",
+			 __func__, ctrl->pci_dev->irq,
 		    atomic_read(&shpchp_num_controllers), rc);
 		if (rc) {
-			err("Can't get irq %d for the hotplug controller\n",
-			    ctrl->pci_dev->irq);
+			ctrl_err(ctrl, "Can't get irq %d for the hotplug "
+				 "controller\n", ctrl->pci_dev->irq);
 			goto abort_iounmap;
 		}
 	}
-	dbg("%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n", __func__,
-			pdev->bus->number, PCI_SLOT(pdev->devfn),
-			PCI_FUNC(pdev->devfn), pdev->irq);
+	ctrl_dbg(ctrl, "%s: HPC at b:d:f:irq=0x%x:%x:%x:%x\n",
+		 __func__, pdev->bus->number, PCI_SLOT(pdev->devfn),
+		 PCI_FUNC(pdev->devfn), pdev->irq);
 
 	/*
 	 * If this is the first controller to be initialized,
@@ -1102,8 +1109,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 	 */
 	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
 		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
-		dbg("%s: Default Logical Slot Register %d value %x\n", __func__,
-			hp_slot, slot_reg);
+		ctrl_dbg(ctrl, "%s: Default Logical Slot Register %d "
+			 "value %x\n", __func__, hp_slot, slot_reg);
 		slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
 			      BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
 			      CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK);
@@ -1116,7 +1123,8 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
 			       SERR_INTR_RSVDZ_MASK);
 		shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
 		tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
-		dbg("%s: SERR_INTR_ENABLE = %x\n", __func__, tempdword);
+		ctrl_dbg(ctrl, "%s: SERR_INTR_ENABLE = %x\n",
+			 __func__, tempdword);
 	}
 
 	return 0;
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index 3fc4ec0eea0..faecbfaa64f 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -101,18 +101,20 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 	struct pci_dev *dev;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 	int num, fn;
+	struct controller *ctrl = p_slot->ctrl;
 
 	dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (dev) {
-		err("Device %s already exists at %x:%x, cannot hot-add\n",
-				pci_name(dev), p_slot->bus, p_slot->device);
+		ctrl_err(ctrl,
+			 "Device %s already exists at %x:%x, cannot hot-add\n",
+			 pci_name(dev), p_slot->bus, p_slot->device);
 		pci_dev_put(dev);
 		return -EINVAL;
 	}
 
 	num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
 	if (num == 0) {
-		err("No new device found\n");
+		ctrl_err(ctrl, "No new device found\n");
 		return -ENODEV;
 	}
 
@@ -121,8 +123,8 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 		if (!dev)
 			continue;
 		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			err("Cannot hot-add display device %s\n",
-					pci_name(dev));
+			ctrl_err(ctrl, "Cannot hot-add display device %s\n",
+				 pci_name(dev));
 			pci_dev_put(dev);
 			continue;
 		}
@@ -138,14 +140,15 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 					break;
 			}
 			if (busnr >= end) {
-				err("No free bus for hot-added bridge\n");
+				ctrl_err(ctrl,
+					 "No free bus for hot-added bridge\n");
 				pci_dev_put(dev);
 				continue;
 			}
 			child = pci_add_new_bus(parent, dev, busnr);
 			if (!child) {
-				err("Cannot add new bus for %s\n",
-						pci_name(dev));
+				ctrl_err(ctrl, "Cannot add new bus for %s\n",
+					 pci_name(dev));
 				pci_dev_put(dev);
 				continue;
 			}
@@ -168,8 +171,10 @@ int shpchp_unconfigure_device(struct slot *p_slot)
 	int j;
 	u8 bctl = 0;
 	struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+	struct controller *ctrl = p_slot->ctrl;
 
-	dbg("%s: bus/dev = %x/%x\n", __func__, p_slot->bus, p_slot->device);
+	ctrl_dbg(ctrl, "%s: bus/dev = %x/%x\n",
+		 __func__, p_slot->bus, p_slot->device);
 
 	for (j=0; j<8 ; j++) {
 		struct pci_dev* temp = pci_get_slot(parent,
@@ -177,16 +182,17 @@ int shpchp_unconfigure_device(struct slot *p_slot)
 		if (!temp)
 			continue;
 		if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			err("Cannot remove display device %s\n",
-					pci_name(temp));
+			ctrl_err(ctrl, "Cannot remove display device %s\n",
+				 pci_name(temp));
 			pci_dev_put(temp);
 			continue;
 		}
 		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
 			if (bctl & PCI_BRIDGE_CTL_VGA) {
-				err("Cannot remove display device %s\n",
-						pci_name(temp));
+				ctrl_err(ctrl,
+					 "Cannot remove display device %s\n",
+					 pci_name(temp));
 				pci_dev_put(temp);
 				continue;
 			}