Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes

58 files changed, 728 insertions, 775 deletions

diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl
index 5e87ad58c0b..f51f28531b8 100644
--- a/Documentation/DocBook/filesystems.tmpl
+++ b/Documentation/DocBook/filesystems.tmpl
@@ -82,6 +82,11 @@
      </sect1>
   </chapter>
 
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 0e76ef12e4c..a22ecf48f25 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 6526eee525a..d2b56a4fd1f 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 89835a4766a..f4a04c0c7ed 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=nn[KMG]@ss[KMG]
-			[KNL] Reserve a chunk of physical memory to
-			hold a kernel to switch to with kexec on panic.
+	crashkernel=size[KMG][@offset[KMG]]
+			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			upon panic. This parameter reserves the physical
+			memory region [offset, offset + size] for that kernel
+			image. If '@offset' is omitted, then a suitable offset
+			is selected automatically. Check
+			Documentation/kdump/kdump.txt for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for a example.
+			Documentation/kdump/kdump.txt for an example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format: { n | nk | nM }
-			n must be a power of two.  The default size
-			is set in the kernel config file.
+	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
+			in bytes.  n must be a power of two.  The default
+			size is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6c751e6a..6f99e1260db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -885,7 +885,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -2873,7 +2873,6 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
diff --git a/Makefile b/Makefile
index 5e40aa2acbf..26d7d824db5 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fbc5b775f89..b166b1d845d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -347,6 +347,7 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_assp,
 	&pxa25x_device_pwm0,
 	&pxa25x_device_pwm1,
+	&pxa_device_asoc_platform,
 };
 
 static struct sys_device pxa25x_sysdev[] = {
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index c31e601eb49..b9b1e5c2b29 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -81,8 +81,6 @@ static int tosa_bt_probe(struct platform_device *dev)
 		goto err_rfk_alloc;
 	}
 
-	rfkill_set_led_trigger_name(rfk, "tosa-bt");
-
 	rc = rfkill_register(rfk);
 	if (rc)
 		goto err_rfkill;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index af152e70cfc..f2582ec300d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -875,6 +875,11 @@ static struct platform_device sharpsl_rom_device = {
 	.dev.platform_data = &sharpsl_rom_data,
 };
 
+static struct platform_device wm9712_device = {
+	.name	= "wm9712-codec",
+	.id	= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
@@ -885,6 +890,7 @@ static struct platform_device *devices[] __initdata = {
 	&tosaled_device,
 	&tosa_bt_device,
 	&sharpsl_rom_device,
+	&wm9712_device,
 };
 
 static void tosa_poweroff(void)
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 203dd5a18bd..058dab4482a 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5p6442/include/mach/map.h
  *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * S5P6442 - Memory map definitions
@@ -16,56 +16,61 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5P6442_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+#define S5P6442_PA_SDRAM	0x20000000
 
-#define S5P6442_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+#define S5P6442_PA_I2S0		0xC0B00000
+#define S5P6442_PA_I2S1		0xF2200000
 
-#define S5P6442_PA_GPIO		(0xE0200000)
+#define S5P6442_PA_CHIPID	0xE0000000
 
-#define S5P6442_PA_VIC0		(0xE4000000)
-#define S5P6442_PA_VIC1		(0xE4100000)
-#define S5P6442_PA_VIC2		(0xE4200000)
+#define S5P6442_PA_SYSCON	0xE0100000
 
-#define S5P6442_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5P6442_PA_SROMC
+#define S5P6442_PA_GPIO		0xE0200000
 
-#define S5P6442_PA_MDMA		0xE8000000
-#define S5P6442_PA_PDMA		0xE9000000
+#define S5P6442_PA_VIC0		0xE4000000
+#define S5P6442_PA_VIC1		0xE4100000
+#define S5P6442_PA_VIC2		0xE4200000
 
-#define S5P6442_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P6442_PA_TIMER
+#define S5P6442_PA_SROMC	0xE7000000
 
-#define S5P6442_PA_SYSTIMER   	(0xEA100000)
+#define S5P6442_PA_MDMA		0xE8000000
+#define S5P6442_PA_PDMA		0xE9000000
 
-#define S5P6442_PA_WATCHDOG	(0xEA200000)
+#define S5P6442_PA_TIMER	0xEA000000
 
-#define S5P6442_PA_UART		(0xEC000000)
+#define S5P6442_PA_SYSTIMER	0xEA100000
 
-#define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5P6442_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5P6442_PA_UART + 0x800)
-#define S5P_SZ_UART		SZ_256
+#define S5P6442_PA_WATCHDOG	0xEA200000
 
-#define S5P6442_PA_IIC0		(0xEC100000)
+#define S5P6442_PA_UART		0xEC000000
 
-#define S5P6442_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+#define S5P6442_PA_IIC0		0xEC100000
 
 #define S5P6442_PA_SPI		0xEC300000
 
-/* I2S */
-#define S5P6442_PA_I2S0		0xC0B00000
-#define S5P6442_PA_I2S1		0xF2200000
-
-/* PCM */
 #define S5P6442_PA_PCM0		0xF2400000
 #define S5P6442_PA_PCM1		0xF2500000
 
-/* compatibiltiy defines. */
+/* Compatibiltiy Defines */
+
+#define S3C_PA_IIC		S5P6442_PA_IIC0
 #define S3C_PA_WDT		S5P6442_PA_WATCHDOG
+
+#define S5P_PA_CHIPID		S5P6442_PA_CHIPID
+#define S5P_PA_SDRAM		S5P6442_PA_SDRAM
+#define S5P_PA_SROMC		S5P6442_PA_SROMC
+#define S5P_PA_SYSCON		S5P6442_PA_SYSCON
+#define S5P_PA_TIMER		S5P6442_PA_TIMER
+
+/* UART */
+
 #define S3C_PA_UART		S5P6442_PA_UART
-#define S3C_PA_IIC		S5P6442_PA_IIC0
+
+#define S5P_PA_UART(x)		(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0		S5P_PA_UART(0)
+#define S5P_PA_UART1		S5P_PA_UART(1)
+#define S5P_PA_UART2		S5P_PA_UART(2)
+
+#define S5P_SZ_UART		SZ_256
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index a9365e5ba61..95c91257c7c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s5p64x0/include/mach/map.h
  *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * S5P64X0 - Memory map definitions
@@ -16,64 +16,46 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-#define S5P64X0_PA_SDRAM	(0x20000000)
+#define S5P64X0_PA_SDRAM	0x20000000
 
-#define S5P64X0_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
-
-#define S5P64X0_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
-
-#define S5P64X0_PA_GPIO		(0xE0308000)
-
-#define S5P64X0_PA_VIC0		(0xE4000000)
-#define S5P64X0_PA_VIC1		(0xE4100000)
+#define S5P64X0_PA_CHIPID	0xE0000000
 
-#define S5P64X0_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5P64X0_PA_SROMC
-
-#define S5P64X0_PA_PDMA		(0xE9000000)
-
-#define S5P64X0_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+#define S5P64X0_PA_SYSCON	0xE0100000
 
-#define S5P64X0_PA_RTC		(0xEA100000)
+#define S5P64X0_PA_GPIO		0xE0308000
 
-#define S5P64X0_PA_WDT		(0xEA200000)
+#define S5P64X0_PA_VIC0		0xE4000000
+#define S5P64X0_PA_VIC1		0xE4100000
 
-#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
-#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+#define S5P64X0_PA_SROMC	0xE7000000
 
-#define S5P_PA_UART0		S5P6450_PA_UART(0)
-#define S5P_PA_UART1		S5P6450_PA_UART(1)
-#define S5P_PA_UART2		S5P6450_PA_UART(2)
-#define S5P_PA_UART3		S5P6450_PA_UART(3)
-#define S5P_PA_UART4		S5P6450_PA_UART(4)
-#define S5P_PA_UART5		S5P6450_PA_UART(5)
+#define S5P64X0_PA_PDMA		0xE9000000
 
-#define S5P_SZ_UART		SZ_256
+#define S5P64X0_PA_TIMER	0xEA000000
+#define S5P64X0_PA_RTC		0xEA100000
+#define S5P64X0_PA_WDT		0xEA200000
 
-#define S5P6440_PA_IIC0		(0xEC104000)
-#define S5P6440_PA_IIC1		(0xEC20F000)
-#define S5P6450_PA_IIC0		(0xEC100000)
-#define S5P6450_PA_IIC1		(0xEC200000)
+#define S5P6440_PA_IIC0		0xEC104000
+#define S5P6440_PA_IIC1		0xEC20F000
+#define S5P6450_PA_IIC0		0xEC100000
+#define S5P6450_PA_IIC1		0xEC200000
 
-#define S5P64X0_PA_SPI0		(0xEC400000)
-#define S5P64X0_PA_SPI1		(0xEC500000)
+#define S5P64X0_PA_SPI0		0xEC400000
+#define S5P64X0_PA_SPI1		0xEC500000
 
-#define S5P64X0_PA_HSOTG	(0xED100000)
+#define S5P64X0_PA_HSOTG	0xED100000
 
 #define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
-#define S5P64X0_PA_I2S		(0xF2000000)
+#define S5P64X0_PA_I2S		0xF2000000
 #define S5P6450_PA_I2S1		0xF2800000
 #define S5P6450_PA_I2S2		0xF2900000
 
-#define S5P64X0_PA_PCM		(0xF2100000)
+#define S5P64X0_PA_PCM		0xF2100000
 
-#define S5P64X0_PA_ADC		(0xF3000000)
+#define S5P64X0_PA_ADC		0xF3000000
 
-/* compatibiltiy defines. */
+/* Compatibiltiy Defines */
 
 #define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
 #define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
@@ -83,6 +65,25 @@
 #define S3C_PA_RTC		S5P64X0_PA_RTC
 #define S3C_PA_WDT		S5P64X0_PA_WDT
 
+#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
+#define S5P_PA_SROMC		S5P64X0_PA_SROMC
+#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
+#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+
 #define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
 
+/* UART */
+
+#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0		S5P6450_PA_UART(0)
+#define S5P_PA_UART1		S5P6450_PA_UART(1)
+#define S5P_PA_UART2		S5P6450_PA_UART(2)
+#define S5P_PA_UART3		S5P6450_PA_UART(3)
+#define S5P_PA_UART4		S5P6450_PA_UART(4)
+#define S5P_PA_UART5		S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART		SZ_256
+
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 328467b346a..ccbe6b767f7 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -1,5 +1,8 @@
 /* linux/arch/arm/mach-s5pc100/include/mach/map.h
  *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
@@ -16,145 +19,115 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
-/*
- * map-base.h has already defined virtual memory address
- * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
- * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
- * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
- * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
- * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
- * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
- *
- * S5PC100 specific virtual memory address can be defined here
- * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
- *
- */
+#define S5PC100_PA_SDRAM		0x20000000
+
+#define S5PC100_PA_ONENAND		0xE7100000
+#define S5PC100_PA_ONENAND_BUF		0xB0000000
+
+#define S5PC100_PA_CHIPID		0xE0000000
 
-#define S5PC100_PA_ONENAND_BUF	(0xB0000000)
-#define S5PC100_SZ_ONENAND_BUF	(SZ_256M - SZ_32M)
+#define S5PC100_PA_SYSCON		0xE0100000
 
-/* Chip ID */
+#define S5PC100_PA_OTHERS		0xE0200000
 
-#define S5PC100_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5PC100_PA_CHIPID
+#define S5PC100_PA_GPIO			0xE0300000
 
-#define S5PC100_PA_SYSCON	(0xE0100000)
-#define S5P_PA_SYSCON		S5PC100_PA_SYSCON
+#define S5PC100_PA_VIC0			0xE4000000
+#define S5PC100_PA_VIC1			0xE4100000
+#define S5PC100_PA_VIC2			0xE4200000
 
-#define S5PC100_PA_OTHERS	(0xE0200000)
-#define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
+#define S5PC100_PA_SROMC		0xE7000000
 
-#define S5PC100_PA_GPIO		(0xE0300000)
-#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S5PC100_PA_CFCON		0xE7800000
 
-/* Interrupt */
-#define S5PC100_PA_VIC0		(0xE4000000)
-#define S5PC100_PA_VIC1		(0xE4100000)
-#define S5PC100_PA_VIC2		(0xE4200000)
-#define S5PC100_VA_VIC		S3C_VA_IRQ
-#define S5PC100_VA_VIC_OFFSET	0x10000
-#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_MDMA			0xE8100000
+#define S5PC100_PA_PDMA0		0xE9000000
+#define S5PC100_PA_PDMA1		0xE9200000
 
-#define S5PC100_PA_SROMC	(0xE7000000)
-#define S5P_PA_SROMC		S5PC100_PA_SROMC
+#define S5PC100_PA_TIMER		0xEA000000
+#define S5PC100_PA_SYSTIMER		0xEA100000
+#define S5PC100_PA_WATCHDOG		0xEA200000
+#define S5PC100_PA_RTC			0xEA300000
 
-#define S5PC100_PA_ONENAND	(0xE7100000)
+#define S5PC100_PA_UART			0xEC000000
 
-#define S5PC100_PA_CFCON	(0xE7800000)
+#define S5PC100_PA_IIC0			0xEC100000
+#define S5PC100_PA_IIC1			0xEC200000
 
-/* DMA */
-#define S5PC100_PA_MDMA		(0xE8100000)
-#define S5PC100_PA_PDMA0	(0xE9000000)
-#define S5PC100_PA_PDMA1	(0xE9200000)
+#define S5PC100_PA_SPI0			0xEC300000
+#define S5PC100_PA_SPI1			0xEC400000
+#define S5PC100_PA_SPI2			0xEC500000
 
-/* Timer */
-#define S5PC100_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5PC100_PA_TIMER
+#define S5PC100_PA_USB_HSOTG		0xED200000
+#define S5PC100_PA_USB_HSPHY		0xED300000
 
-#define S5PC100_PA_SYSTIMER	(0xEA100000)
+#define S5PC100_PA_HSMMC(x)		(0xED800000 + ((x) * 0x100000))
 
-#define S5PC100_PA_WATCHDOG	(0xEA200000)
-#define S5PC100_PA_RTC		(0xEA300000)
+#define S5PC100_PA_FB			0xEE000000
 
-#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC100_PA_FIMC0		0xEE200000
+#define S5PC100_PA_FIMC1		0xEE300000
+#define S5PC100_PA_FIMC2		0xEE400000
 
-#define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5PC100_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5PC100_PA_UART +