Merge branch 'marvell/dt' into late2/dt

* marvell/dt: (41 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

65 files changed, 1915 insertions, 646 deletions

diff --git a/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
index 80b9a94d9a2..8b53273cb22 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/intc.txt
+++ b/Documentation/devicetree/bindings/arm/mrvl/intc.txt
@@ -38,3 +38,23 @@ Example:
 		reg-names = "mux status", "mux mask";
 		mrvl,intc-nr-irqs = <2>;
 	};
+
+* Marvell Orion Interrupt controller
+
+Required properties
+- compatible :  Should be "marvell,orion-intc".
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. Supported value is <1>.
+- interrupt-controller : Declare this node to be an interrupt controller.
+- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
+        One entry in the list represents 32 interrupts.
+
+Example:
+
+	intc: interrupt-controller {
+        	compatible = "marvell,orion-intc", "marvell,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+                reg = <0xfed20204 0x04>,
+		      <0xfed20214 0x04>;
+        };
diff --git a/Documentation/devicetree/bindings/ata/marvell.txt b/Documentation/devicetree/bindings/ata/marvell.txt
new file mode 100644
index 00000000000..b5cdd20cde9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/marvell.txt
@@ -0,0 +1,16 @@
+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata"
+- reg           : Address range of controller
+- interrupts    : Interrupt controller is using
+- nr-ports      : Number of SATA ports in use.
+
+Example:
+
+	sata@80000 {
+		compatible = "marvell,orion-sata";
+		reg = <0x80000 0x5000>;
+		interrupts = <21>;
+		nr-ports = <2>;
+	}
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 05428f39d9a..e13787498bc 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -27,3 +27,26 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
       };
+
+* Marvell Orion GPIO Controller
+
+Required properties:
+- compatible         : Should be "marvell,orion-gpio"
+- reg                : Address and length of the register set for controller.
+- gpio-controller    : So we know this is a gpio controller.
+- ngpio              : How many gpios this controller has.
+- interrupts	     : Up to 4 Interrupts for the controller.
+
+Optional properties:
+- mask-offset        : For SMP Orions, offset for Nth CPU
+
+Example:
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpio = <32>;
+			interrupts = <35>, <36>, <37>, <38>;
+		};
diff --git a/Documentation/devicetree/bindings/mtd/orion-nand.txt b/Documentation/devicetree/bindings/mtd/orion-nand.txt
index b2356b7d2fa..2d6ab660e60 100644
--- a/Documentation/devicetree/bindings/mtd/orion-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/orion-nand.txt
@@ -1,7 +1,7 @@
 NAND support for Marvell Orion SoC platforms
 
 Required properties:
-- compatible : "mrvl,orion-nand".
+- compatible : "marvell,orion-nand".
 - reg : Base physical address of the NAND and length of memory mapped
 	region
 
@@ -24,7 +24,7 @@ nand@f4000000 {
 	ale = <1>;
 	bank-width = <1>;
 	chip-delay = <25>;
-	compatible = "mrvl,orion-nand";
+	compatible = "marvell,orion-nand";
 	reg = <0xf4000000 0x400>;
 
 	partition@0 {
diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt
new file mode 100644
index 00000000000..a3ff50fc76f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-orion.txt
@@ -0,0 +1,19 @@
+Marvell Orion SPI device
+
+Required properties:
+- compatible : should be "marvell,orion-spi".
+- reg : offset and length of the register set for the device
+- cell-index : Which of multiple SPI controllers is this.
+Optional properties:
+- interrupts : Is currently not used.
+
+Example:
+       spi@10600 {
+	       compatible = "marvell,orion-spi";
+	       #address-cells = <1>;
+	       #size-cells = <0>;
+	       cell-index = <0>;
+	       reg = <0x10600 0x28>;
+	       interrupts = <23>;
+	       status = "disabled";
+       };
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
new file mode 100644
index 00000000000..0b2503ab0a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -0,0 +1,14 @@
+* Marvell Orion Watchdog Time
+
+Required Properties:
+
+- Compatibility : "marvell,orion-wdt"
+- reg		: Address of the timer registers
+
+Example:
+
+	wdt@20300 {
+		compatible = "marvell,orion-wdt";
+		reg = <0x20300 0x28>;
+		status = "okay";
+	};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a91009c6187..39bb94112a3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1105,6 +1105,7 @@ config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
 	select COMMON_CLK
 
 config PLAT_PXA
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index dc09a735b04..5bb0bf39d3b 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -1,10 +1,10 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-320 NAS (Rev A1)";
-	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -15,6 +15,31 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+		blue-power {
+			label = "dns320:blue:power";
+			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+			linux,default-trigger = "default-on";
+		};
+		blue-usb {
+			label = "dns320:blue:usb";
+			gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+		};
+		orange-l_hdd {
+			label = "dns320:orange:l_hdd";
+			gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
+		};
+		orange-r_hdd {
+			label = "dns320:orange:r_hdd";
+			gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+		};
+		orange-usb {
+			label = "dns320:orange:usb";
+			gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */
+		};
+	};
+
 	ocp@f1000000 {
 		serial@12000 {
 			clock-frequency = <166666667>;
@@ -25,40 +50,5 @@
 			clock-frequency = <166666667>;
 			status = "okay";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index c2a5562525d..d430713ea9b 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -1,10 +1,10 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
+/include/ "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-325 NAS (Rev A1)";
-	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -15,45 +15,43 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "okay";
+	gpio-leds {
+		compatible = "gpio-leds";
+		white-power {
+			label = "dns325:white:power";
+			gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
+			linux,default-trigger = "default-on";
+		};
+		white-usb {
+			label = "dns325:white:usb";
+			gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
+		};
+		red-l_hdd {
+			label = "dns325:red:l_hdd";
+			gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
 		};
+		red-r_hdd {
+			label = "dns325:red:r_hdd";
+			gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
+		};
+		red-usb {
+			label = "dns325:red:usb";
+			gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */
+		};
+	};
 
-		nand@3000000 {
+	ocp@f1000000 {
+		i2c@11000 {
 			status = "okay";
 
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x500000>;
-			};
-
-			partition@600000 {
-				label = "ramdisk";
-				reg = <0x0600000 0x500000>;
-			};
-
-			partition@b00000 {
-				label = "image";
-				reg = <0x0b00000 0x6600000>;
-			};
-
-			partition@7100000 {
-				label = "mini firmware";
-				reg = <0x7100000 0xa00000>;
-			};
-
-			partition@7b00000 {
-				label = "config";
-				reg = <0x7b00000 0x500000>;
+			lm75: lm75@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
 			};
 		};
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
new file mode 100644
index 00000000000..7408655f91b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -0,0 +1,69 @@
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "D-Link DNS NASes (kirkwood-based)";
+	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "Power button";
+			linux,code = <116>;
+			gpios = <&gpio1 2 1>;
+		};
+		button@2 {
+			label = "USB unmount button";
+			linux,code = <161>;
+			gpios = <&gpio1 15 1>;
+		};
+		button@3 {
+			label = "Reset button";
+			linux,code = <0x198>;
+			gpios = <&gpio1 16 1>;
+		};
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x500000>;
+			};
+
+			partition@600000 {
+				label = "ramdisk";
+				reg = <0x0600000 0x500000>;
+			};
+
+			partition@b00000 {
+				label = "image";
+				reg = <0x0b00000 0x6600000>;
+			};
+
+			partition@7100000 {
+				label = "mini firmware";
+				reg = <0x7100000 0xa00000>;
+			};
+
+			partition@7b00000 {
+				label = "config";
+				reg = <0x7b00000 0x500000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index a5376b84227..26e281fbf6b 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -4,7 +4,7 @@
 
 / {
 	model = "Globalscale Technologies Dreamplug";
-	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -20,5 +20,55 @@
 			clock-frequency = <200000000>;
 			status = "ok";
 		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l1606e";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@100000 {
+					reg = <0x100000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@180000 {
+					reg = <0x180000 0x10000>;
+					label = "dtb";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		bluetooth {
+			label = "dreamplug:blue:bluetooth";
+			gpios = <&gpio1 15 1>;
+		};
+		wifi {
+			label = "dreamplug:green:wifi";
+			gpios = <&gpio1 16 1>;
+		};
+		wifi-ap {
+			label = "dreamplug:green:wifi_ap";
+			gpios = <&gpio1 17 1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
new file mode 100644
index 00000000000..7c8238fbb6f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Seagate GoFlex Net";
+	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			clock-frequency = <200000000>;
+			status = "ok";
+		};
+
+		nand@3000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "uImage";
+				reg = <0x0100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "pogoplug";
+				reg = <0x0500000 0x2000000>;
+			};
+
+			partition@2500000 {
+				label = "root";
+				reg = <0x02500000 0xd800000>;
+			};
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 1>;
+			linux,default-trigger = "default-on";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 1>;
+		};
+		left0 {
+			label = "status:white:left0";
+			gpios = <&gpio1 10 0>;
+		};
+		left1 {
+			label = "status:white:left1";
+			gpios = <&gpio1 11 0>;
+		};
+		left2 {
+			label = "status:white:left2";
+			gpios = <&gpio1 12 0>;
+		};
+		left3 {
+			label = "status:white:left3";
+			gpios = <&gpio1 13 0>;
+		};
+		right0 {
+			label = "status:white:right0";
+			gpios = <&gpio1 6 0>;
+		};
+		right1 {
+			label = "status:white:right1";
+			gpios = <&gpio1 7 0>;
+		};
+		right2 {
+			label = "status:white:right2";
+			gpios = <&gpio1 8 0>;
+		};
+		right3 {
+			label = "status:white:right3";
+			gpios = <&gpio1 9 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index ada0f0c2308..66794ed75ff 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts