Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac

* 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac: (25 commits)
  i7300_edac: Properly initialize per-csrow memory size
  V4L/DVB: i7300_edac: better initialize page counts
  MAINTAINERS: Add maintainer for i7300-edac driver
  i7300-edac: CodingStyle cleanup
  i7300_edac: Improve comments
  i7300_edac: Cleanup: reorganize the file contents
  i7300_edac: Properly detect channel on CE errors
  i7300_edac: enrich FBD error info for corrected errors
  i7300_edac: enrich FBD error info for fatal errors
  i7300_edac: pre-allocate a buffer used to prepare err messages
  i7300_edac: Fix MTR x4/x8 detection logic
  i7300_edac: Make the debug messages coherent with the others
  i7300_edac: Cleanup: remove get_error_info logic
  i7300_edac: Add a code to cleanup error registers
  i7300_edac: Add support for reporting FBD errors
  i7300_edac: Properly detect the type of error correction
  i7300_edac: Detect if the device is on single mode
  i7300_edac: Adds detection for enhanced scrub mode on x8
  i7300_edac: Clear the error bit after reading
  i7300_edac: Add error detection code for global errors
  ...

5 files changed, 1273 insertions, 8 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 0e265fcc103..23a4ca9e27f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2212,6 +2212,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
+EDAC-I7300
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/i7300_edac.c
+
 EDAC-I7CORE
 M:	Mauro Carvalho Chehab <mchehab@redhat.com>
 L:	linux-edac@vger.kernel.org
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 9dbb28b9559..f436a2fa9f3 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -209,6 +209,13 @@ config EDAC_I5100
 	  Support for error detection and correction the Intel
 	  San Clemente MCH.
 
+config EDAC_I7300
+	tristate "Intel Clarksboro MCH"
+	depends on EDAC_MM_EDAC && X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  Clarksboro MCH (Intel 7300 chipset).
+
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
 	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 32c7bc93c52..b3781399b38 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
 obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
+obj-$(CONFIG_EDAC_I7300)		+= i7300_edac.o
 obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
new file mode 100644
index 00000000000..05523b50427
--- /dev/null
+++ b/drivers/edac/i7300_edac.c
@@ -0,0 +1,1247 @@
+/*
+ * Intel 7300 class Memory Controllers kernel module (Clarksboro)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2010 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Intel 7300 Chipset Memory Controller Hub (MCH) - Datasheet
+ *	http://www.intel.com/Assets/PDF/datasheet/318082.pdf
+ *
+ * TODO: The chipset allow checking for PCI Express errors also. Currently,
+ *	 the driver covers only memory error errors
+ *
+ * This driver uses "csrows" EDAC attribute to represent DIMM slot#
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+
+#include "edac_core.h"
+
+/*
+ * Alter this version for the I7300 module when modifications are made
+ */
+#define I7300_REVISION    " Ver: 1.0.0 " __DATE__
+
+#define EDAC_MOD_STR      "i7300_edac"
+
+#define i7300_printk(level, fmt, arg...) \
+	edac_printk(level, "i7300", fmt, ##arg)
+
+#define i7300_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "i7300", fmt, ##arg)
+
+/***********************************************
+ * i7300 Limit constants Structs and static vars
+ ***********************************************/
+
+/*
+ * Memory topology is organized as:
+ *	Branch 0 - 2 channels: channels 0 and 1 (FDB0 PCI dev 21.0)
+ *	Branch 1 - 2 channels: channels 2 and 3 (FDB1 PCI dev 22.0)
+ * Each channel can have to 8 DIMM sets (called as SLOTS)
+ * Slots should generally be filled in pairs
+ *	Except on Single Channel mode of operation
+ *		just slot 0/channel0 filled on this mode
+ *	On normal operation mode, the two channels on a branch should be
+ *		filled together for the same SLOT#
+ * When in mirrored mode, Branch 1 replicate memory at Branch 0, so, the four
+ *		channels on both branches should be filled
+ */
+
+/* Limits for i7300 */
+#define MAX_SLOTS		8
+#define MAX_BRANCHES		2
+#define MAX_CH_PER_BRANCH	2
+#define MAX_CHANNELS		(MAX_CH_PER_BRANCH * MAX_BRANCHES)
+#define MAX_MIR			3
+
+#define to_channel(ch, branch)	((((branch)) << 1) | (ch))
+
+#define to_csrow(slot, ch, branch)					\
+		(to_channel(ch, branch) | ((slot) << 2))
+
+/* Device name and register DID (Device ID) */
+struct i7300_dev_info {
+	const char *ctl_name;	/* name for this device */
+	u16 fsb_mapping_errors;	/* DID for the branchmap,control */
+};
+
+/* Table of devices attributes supported by this driver */
+static const struct i7300_dev_info i7300_devs[] = {
+	{
+		.ctl_name = "I7300",
+		.fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I7300_MCH_ERR,
+	},
+};
+
+struct i7300_dimm_info {
+	int megabytes;		/* size, 0 means not present  */
+};
+
+/* driver private data structure */
+struct i7300_pvt {
+	struct pci_dev *pci_dev_16_0_fsb_ctlr;		/* 16.0 */
+	struct pci_dev *pci_dev_16_1_fsb_addr_map;	/* 16.1 */
+	struct pci_dev *pci_dev_16_2_fsb_err_regs;	/* 16.2 */
+	struct pci_dev *pci_dev_2x_0_fbd_branch[MAX_BRANCHES];	/* 21.0  and 22.0 */
+
+	u16 tolm;				/* top of low memory */
+	u64 ambase;				/* AMB BAR */
+
+	u32 mc_settings;			/* Report several settings */
+	u32 mc_settings_a;
+
+	u16 mir[MAX_MIR];			/* Memory Interleave Reg*/
+
+	u16 mtr[MAX_SLOTS][MAX_BRANCHES];	/* Memory Technlogy Reg */
+	u16 ambpresent[MAX_CHANNELS];		/* AMB present regs */
+
+	/* DIMM information matrix, allocating architecture maximums */
+	struct i7300_dimm_info dimm_info[MAX_SLOTS][MAX_CHANNELS];
+
+	/* Temporary buffer for use when preparing error messages */
+	char *tmp_prt_buffer;
+};
+
+/* FIXME: Why do we need to have this static? */
+static struct edac_pci_ctl_info *i7300_pci;
+
+/***************************************************
+ * i7300 Register definitions for memory enumeration
+ ***************************************************/
+
+/*
+ * Device 16,
+ * Function 0: System Address (not documented)
+ * Function 1: Memory Branch Map, Control, Errors Register
+ */
+
+	/* OFFSETS for Function 0 */
+#define AMBASE			0x48 /* AMB Mem Mapped Reg Region Base */
+#define MAXCH			0x56 /* Max Channel Number */
+#define MAXDIMMPERCH		0x57 /* Max DIMM PER Channel Number */
+
+	/* OFFSETS for Function 1 */
+#define MC_SETTINGS		0x40
+  #define IS_MIRRORED(mc)		((mc) & (1 << 16))
+  #define IS_ECC_ENABLED(mc)		((mc) & (1 << 5))
+  #define IS_RETRY_ENABLED(mc)		((mc) & (1 << 31))
+  #define IS_SCRBALGO_ENHANCED(mc)	((mc) & (1 << 8))
+
+#define MC_SETTINGS_A		0x58
+  #define IS_SINGLE_MODE(mca)		((mca) & (1 << 14))
+
+#define TOLM			0x6C
+
+#define MIR0			0x80
+#define MIR1			0x84
+#define MIR2			0x88
+
+/*
+ * Note: Other Intel EDAC drivers use AMBPRESENT to identify if the available
+ * memory. From datasheet item 7.3.1 (FB-DIMM technology & organization), it
+ * seems that we cannot use this information directly for the same usage.
+ * Each memory slot may have up to 2 AMB interfaces, one for income and another
+ * for outcome interface to the next slot.
+ * For now, the driver just stores the AMB present registers, but rely only at
+ * the MTR info to detect memory.
+ * Datasheet is also not clear about how to map each AMBPRESENT registers to
+ * one of the 4 available channels.
+ */
+#define AMBPRESENT_0	0x64
+#define AMBPRESENT_1	0x66
+
+const static u16 mtr_regs[MAX_SLOTS] = {
+	0x80, 0x84, 0x88, 0x8c,
+	0x82, 0x86, 0x8a, 0x8e
+};
+
+/*
+ * Defines to extract the vaious fields from the
+ *	MTRx - Memory Technology Registers
+ */
+#define MTR_DIMMS_PRESENT(mtr)		((mtr) & (1 << 8))
+#define MTR_DIMMS_ETHROTTLE(mtr)	((mtr) & (1 << 7))
+#define MTR_DRAM_WIDTH(mtr)		(((mtr) & (1 << 6)) ? 8 : 4)
+#define MTR_DRAM_BANKS(mtr)		(((mtr) & (1 << 5)) ? 8 : 4)
+#define MTR_DIMM_RANKS(mtr)		(((mtr) & (1 << 4)) ? 1 : 0)
+#define MTR_DIMM_ROWS(mtr)		(((mtr) >> 2) & 0x3)
+#define MTR_DRAM_BANKS_ADDR_BITS	2
+#define MTR_DIMM_ROWS_ADDR_BITS(mtr)	(MTR_DIMM_ROWS(mtr) + 13)
+#define MTR_DIMM_COLS(mtr)		((mtr) & 0x3)
+#define MTR_DIMM_COLS_ADDR_BITS(mtr)	(MTR_DIMM_COLS(mtr) + 10)
+
+#ifdef CONFIG_EDAC_DEBUG
+/* MTR NUMROW */
+static const char *numrow_toString[] = {
+	"8,192 - 13 rows",
+	"16,384 - 14 rows",
+	"32,768 - 15 rows",
+	"65,536 - 16 rows"
+};
+
+/* MTR NUMCOL */
+static const char *numcol_toString[] = {
+	"1,024 - 10 columns",
+	"2,048 - 11 columns",
+	"4,096 - 12 columns",
+	"reserved"
+};
+#endif
+
+/************************************************
+ * i7300 Register definitions for error detection
+ ************************************************/
+
+/*
+ * Device 16.1: FBD Error Registers
+ */
+#define FERR_FAT_FBD	0x98
+static const char *ferr_fat_fbd_name[] = {
+	[22] = "Non-Redundant Fast Reset Timeout",
+	[2]  = ">Tmid Thermal event with intelligent throttling disabled",
+	[1]  = "Memory or FBD configuration CRC read error",
+	[0]  = "Memory Write error on non-redundant retry or "
+	       "FBD configuration Write error on retry",
+};
+#define GET_FBD_FAT_IDX(fbderr)	(fbderr & (3 << 28))
+#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
+
+#define FERR_NF_FBD	0xa0
+static const char *ferr_nf_fbd_name[] = {
+	[24] = "DIMM-Spare Copy Completed",
+	[23] = "DIMM-Spare Copy Initiated",
+	[22] = "Redundant Fast Reset Timeout",
+	[21] = "Memory Write error on redundant retry",
+	[18] = "SPD protocol Error",
+	[17] = "FBD Northbound parity error on FBD Sync Status",
+	[16] = "Correctable Patrol Data ECC",
+	[15] = "Correctable Resilver- or Spare-Copy Data ECC",
+	[14] = "Correctable Mirrored Demand Data ECC",
+	[13] = "Correctable Non-Mirrored Demand Data ECC",
+	[11] = "Memory or FBD configuration CRC read error",
+	[10] = "FBD Configuration Write error on first attempt",
+	[9]  = "Memory Write error on first attempt",
+	[8]  = "Non-Aliased Uncorrectable Patrol Data ECC",
+	[7]  = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[6]  = "Non-Aliased Uncorrectable Mirrored Demand Data ECC",
+	[5]  = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	[4]  = "Aliased Uncorrectable Patrol Data ECC",
+	[3]  = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[2]  = "Aliased Uncorrectable Mirrored Demand Data ECC",
+	[1]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	[0]  = "Uncorrectable Data ECC on Replay",
+};
+#define GET_FBD_NF_IDX(fbderr)	(fbderr & (3 << 28))
+#define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\
+			      (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\
+			      (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\
+			      (1 << 9)  | (1 << 8)  | (1 << 7)  | (1 << 6)  |\
+			      (1 << 5)  | (1 << 4)  | (1 << 3)  | (1 << 2)  |\
+			      (1 << 1)  | (1 << 0))
+
+#define EMASK_FBD	0xa8
+#define EMASK_FBD_ERR_MASK ((1 << 27) | (1 << 26) | (1 << 25) | (1 << 24) |\
+			    (1 << 22) | (1 << 21) | (1 << 20) | (1 << 19) |\
+			    (1 << 18) | (1 << 17) | (1 << 16) | (1 << 14) |\
+			    (1 << 13) | (1 << 12) | (1 << 11) | (1 << 10) |\
+			    (1 << 9)  | (1 << 8)  | (1 << 7)  | (1 << 6)  |\
+			    (1 << 5)  | (1 << 4)  | (1 << 3)  | (1 << 2)  |\
+			    (1 << 1)  | (1 << 0))
+
+/*
+ * Device 16.2: Global Error Registers
+ */
+
+#define FERR_GLOBAL_HI	0x48
+static const char *ferr_global_hi_name[] = {
+	[3] = "FSB 3 Fatal Error",
+	[2] = "FSB 2 Fatal Error",
+	[1] = "FSB 1 Fatal Error",
+	[0] = "FSB 0 Fatal Error",
+};
+#define ferr_global_hi_is_fatal(errno)	1
+
+#define FERR_GLOBAL_LO	0x40
+static const char *ferr_global_lo_name[] = {
+	[31] = "Internal MCH Fatal Error",
+	[30] = "Intel QuickData Technology Device Fatal Error",
+	[29] = "FSB1 Fatal Error",
+	[28] = "FSB0 Fatal Error",
+	[27] = "FBD Channel 3 Fatal Error",
+	[26] = "FBD Channel 2 Fatal Error",
+	[25] = "FBD Channel 1 Fatal Error",
+	[24] = "FBD Channel 0 Fatal Error",
+	[23] = "PCI Express Device 7Fatal Error",
+	[22] = "PCI Express Device 6 Fatal Error",
+	[21] = "PCI Express Device 5 Fatal Error",
+	[20] = "PCI Express Device 4 Fatal Error",
+	[19] = "PCI Express Device 3 Fatal Error",
+	[18] = "PCI Express Device 2 Fatal Error",
+	[17] = "PCI Express Device 1 Fatal Error",
+	[16] = "ESI Fatal Error",
+	[15] = "Internal MCH Non-Fatal Error",
+	[14] = "Intel QuickData Technology Device Non Fatal Error",
+	[13] = "FSB1 Non-Fatal Error",
+	[12] = "FSB 0 Non-Fatal Error",
+	[11] = "FBD Channel 3 Non-Fatal Error",
+	[10] = "FBD Channel 2 Non-Fatal Error",
+	[9]  = "FBD Channel 1 Non-Fatal Error",
+	[8]  = "FBD Channel 0 Non-Fatal Error",
+	[7]  = "PCI Express Device 7 Non-Fatal Error",
+	[6]  = "PCI Express Device 6 Non-Fatal Error",
+	[5]  = "PCI Express Device 5 Non-Fatal Error",
+	[4]  = "PCI Express Device 4 Non-Fatal Error",
+	[3]  = "PCI Express Device 3 Non-Fatal Error",
+	[2]  = "PCI Express Device 2 Non-Fatal Error",
+	[1]  = "PCI Express Device 1 Non-Fatal Error",
+	[0]  = "ESI Non-Fatal Error",
+};
+#define ferr_global_lo_is_fatal(errno)	((errno < 16) ? 0 : 1)
+
+#define NRECMEMA	0xbe
+  #define NRECMEMA_BANK(v)	(((v) >> 12) & 7)
+  #define NRECMEMA_RANK(v)	(((v) >> 8) & 15)
+
+#define NRECMEMB	0xc0
+  #define NRECMEMB_IS_WR(v)	((v) & (1 << 31))
+  #define NRECMEMB_CAS(v)	(((v) >> 16) & 0x1fff)
+  #define NRECMEMB_RAS(v)	((v) & 0xffff)
+
+#define REDMEMA		0xdc
+
+#define REDMEMB		0x7c
+  #define IS_SECOND_CH(v)	((v) * (1 << 17))
+
+#define RECMEMA		0xe0
+  #define RECMEMA_BANK(v)	(((v) >> 12) & 7)
+  #define RECMEMA_RANK(v)	(((v) >> 8) & 15)
+
+#define RECMEMB		0xe4
+  #define RECMEMB_IS_WR(v)	((v) & (1 << 31))
+  #define RECMEMB_CAS(v)	(((v) >> 16) & 0x1fff)
+  #define RECMEMB_RAS(v)	((v) & 0xffff)
+
+/********************************************
+ * i7300 Functions related to error detection
+ ********************************************/
+
+/**
+ * get_err_from_table() - Gets the error message from a table
+ * @table:	table name (array of char *)
+ * @size:	number of elements at the table
+ * @pos:	position of the element to be returned
+ *
+ * This is a small routine that gets the pos-th element of a table. If the
+ * element doesn't exist (or it is empty), it returns "reserved".
+ * Instead of calling it directly, the better is to call via the macro
+ * GET_ERR_FROM_TABLE(), that automatically checks the table size via
+ * ARRAY_SIZE() macro
+ */
+static const char *get_err_from_table(const char *table[], int size, int pos)
+{
+	if (unlikely(pos >= size))
+		return "Reserved";
+
+	if (unlikely(!table[pos]))
+		return "Reserved";
+
+	return table[pos];
+}
+
+#define GET_ERR_FROM_TABLE(table, pos)				\
+	get_err_from_table(table, ARRAY_SIZE(table), pos)
+
+/**
+ * i7300_process_error_global() - Retrieve the hardware error information from
+ *				  the hardware global error registers and
+ *				  sends it to dmesg
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_process_error_global(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 errnum, value;
+	unsigned long errors;
+	const char *specific;
+	bool is_fatal;
+
+	pvt = mci->pvt_info;
+
+	/* read in the 1st FATAL error register */
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_HI, &value);
+	if (unlikely(value)) {
+		errors = value;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_global_hi_name));
+		specific = GET_ERR_FROM_TABLE(ferr_global_hi_name, errnum);
+		is_fatal = ferr_global_hi_is_fatal(errnum);
+
+		/* Clear the error bit */
+		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+				       FERR_GLOBAL_HI, value);
+
+		goto error_global;
+	}
+
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_LO, &value);
+	if (unlikely(value)) {
+		errors = value;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_global_lo_name));
+		specific = GET_ERR_FROM_TABLE(ferr_global_lo_name, errnum);
+		is_fatal = ferr_global_lo_is_fatal(errnum);
+
+		/* Clear the error bit */
+		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+				       FERR_GLOBAL_LO, value);
+
+		goto error_global;
+	}
+	return;
+
+error_global:
+	i7300_mc_printk(mci, KERN_EMERG, "%s misc error: %s\n",
+			is_fatal ? "Fatal" : "NOT fatal", specific);
+}
+
+/**
+ * i7300_process_fbd_error() - Retrieve the hardware error information from
+ *			       the FBD error registers and sends it via
+ *			       EDAC error API calls
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_process_fbd_error(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 errnum, value;
+	u16 val16;
+	unsigned branch, channel, bank, rank, cas, ras;
+	u32 syndrome;
+
+	unsigned long errors;
+	const char *specific;
+	bool is_wr;
+
+	pvt = mci->pvt_info;
+
+	/* read in the 1st FATAL error register */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_FAT_FBD, &value);
+	if (unlikely(value & FERR_FAT_FBD_ERR_MASK)) {
+		errors = value & FERR_FAT_FBD_ERR_MASK ;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_fat_fbd_name));
+		specific = GET_ERR_FROM_TABLE(ferr_fat_fbd_name, errnum);
+
+		branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
+		pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
+				     NRECMEMA, &val16);
+		bank = NRECMEMA_BANK(val16);
+		rank = NRECMEMA_RANK(val16);
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				NRECMEMB, &value);
+
+		is_wr = NRECMEMB_IS_WR(value);
+		cas = NRECMEMB_CAS(value);
+		ras = NRECMEMB_RAS(value);
+
+		snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
+			"FATAL (Branch=%d DRAM-Bank=%d %s "
+			"RAS=%d CAS=%d Err=0x%lx (%s))",
+			branch, bank,
+			is_wr ? "RDWR" : "RD",
+			ras, cas,
+			errors, specific);
+
+		/* Call the helper to output message */
+		edac_mc_handle_fbd_ue(mci, rank, branch << 1,
+				      (branch << 1) + 1,
+				      pvt->tmp_prt_buffer);
+	}
+
+	/* read in the 1st NON-FATAL error register */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_NF_FBD, &value);
+	if (unlikely(value & FERR_NF_FBD_ERR_MASK)) {
+		errors = value & FERR_NF_FBD_ERR_MASK;
+		errnum = find_first_bit(&errors,
+					ARRAY_SIZE(ferr_nf_fbd_name));
+		specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
+
+		/* Clear the error bit */
+		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+				       FERR_GLOBAL_LO, value);
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			REDMEMA, &syndrome);
+
+		branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
+		pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
+				     RECMEMA, &val16);
+		bank = RECMEMA_BANK(val16);
+		rank = RECMEMA_RANK(val16);
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				RECMEMB, &value);
+
+		is_wr = RECMEMB_IS_WR(value);
+		cas = RECMEMB_CAS(value);
+		ras = RECMEMB_RAS(value);
+
+		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				     REDMEMB, &value);
+
+		channel = (branch << 1);
+		if (IS_SECOND_CH(value))
+			channel++;
+
+		/* Form out message */
+		snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
+			"Corrected error (Branch=%d, Channel %d), "
+			" DRAM-Bank=%d %s "
+			"RAS=%d CAS=%d, CE Err=0x%lx, Syndrome=0x%08x(%s))",
+			branch, channel,
+			bank,
+			is_wr ? "RDWR" : "RD",
+			ras, cas,
+			errors, syndrome, specific);
+
+		/*
+		 * Call the helper to output message
+		 * NOTE: Errors are reported per-branch, and not per-channel
+		 *	 Currently, we don't know how to identify the right
+		 *	 channel.
+		 */
+		edac_mc_handle_fbd_ce(mci, rank, channel,
+				      pvt->tmp_prt_buffer);
+	}
+	return;
+}
+
+/**
+ * i7300_check_error() - Calls the error checking subroutines
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_check_error(struct mem_ctl_info *mci)
+{
+	i7300_process_error_global(mci);
+	i7300_process_fbd_error(mci);
+};
+
+/**
+ * i7300_clear_error() - Clears the error registers
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_clear_error(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt = mci->pvt_info;
+	u32 value;
+	/*
+	 * All error values are RWC - we need to read and write 1 to the
+	 * bit that we want to cleanup
+	 */
+
+	/* Clear global error registers */
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_HI, &value);
+	pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_HI, value);
+
+	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_LO, &value);
+	pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
+			      FERR_GLOBAL_LO, value);
+
+	/* Clear FBD error registers */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_FAT_FBD, &value);
+	pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_FAT_FBD, value);
+
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_NF_FBD, &value);
+	pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      FERR_NF_FBD, value);
+}
+
+/**
+ * i7300_enable_error_reporting() - Enable the memory reporting logic at the
+ *				    hardware
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_enable_error_reporting(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt = mci->pvt_info;
+	u32 fbd_error_mask;
+
+	/* Read the FBD Error Mask Register */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			      EMASK_FBD, &fbd_error_mask);
+
+	/* Enable with a '0' */
+	fbd_error_mask &= ~(EMASK_FBD_ERR_MASK);
+
+	pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+			       EMASK_FBD, fbd_error_mask);
+}
+
+/************************************************
+ * i7300 Functions related to memory enumberation
+ ************************************************/
+
+/**
+ * decode_mtr() - Decodes the MTR descriptor, filling the edac structs
+ * @pvt: pointer to the private data struct used by i7300 driver
+ * @slot: DIMM slot (0 to 7)
+ * @ch: Channel number within the branch (0 or 1)
+ * @branch: Branch number (0 or 1)
+ * @dinfo: Pointer to DIMM info where dimm size is stored
+ * @p_csrow: Pointer to the struct csrow_info that corresponds to that element
+ */
+static int decode_mtr(struct i7300_pvt *pvt,
+		      int slot, int ch, int branch,
+		      struct i7300_dimm_info *dinfo,
+		      struct csrow_info *p_csrow,
+		      u32 *nr_pages)
+{
+	int mtr, ans, addrBits, channel;
+
+	channel = to_channel(ch, branch);
+
+	mtr = pvt->mtr[slot][branch];
+	ans = MTR_DIMMS_PRESENT(mtr) ? 1 : 0;
+
+	debugf2("\tMTR%d CH%d: DIMMs are %s (mtr)\n",
+		slot, channel,
+		ans ? "Present" : "NOT Present");
+
+	/* Determine if there is a DIMM present in this DIMM slot */
+	if (!ans)
+		return 0;
+
+	/* Start with the number of bits for a Bank
+	* on the DRAM */
+	addrBits = MTR_DRAM_BANKS_ADDR_BITS;
+	/* Add thenumber of ROW bits */
+	addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+	/* add the number of COLUMN bits */
+	addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+	/* add the number of RANK bits */
+	addrBits += MTR_DIMM_RANKS(mtr);
+
+	addrBits += 6;	/* add 64 bits per DIMM */
+	addrBits -= 20;	/* divide by 2^^20 */
+	addrBits -= 3;	/* 8 bits per bytes */
+
+	dinfo->megabytes = 1 << addrBits;
+	*nr_pages = dinfo->megabytes << 8;
+
+	debugf2("\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
+
+	debugf2("\t\tELECTRICAL THROTTLING is %s\n",
+		MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");
+
+	debugf2("\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
+	debugf2("\t\tNUMRANK: %s\n", MTR_DIMM_RANKS(mtr) ? "double" : "single");
+	debugf2("\t\tNUMROW: %s\n", numrow_toString[MTR_DIMM_ROWS(mtr)]);
+	debugf2("\t\tNUMCOL: %s\n", numcol_toString[MTR_DIMM_COLS(mtr)]);
+	debugf2("\t\tSIZE: %d MB\n", dinfo->megabytes);
+
+	p_csrow->grain = 8;
+	p_csrow->mtype = MEM_FB_DDR2;
+	p_csrow->csrow_idx = slot;
+	p_csrow->page_mask = 0;
+
+	/*
+	 * The type of error detection actually depends of the
+	 * mode of operation. When it is just one single memory chip, at
+	 * socket 0, channel 0, it uses 8-byte-over-32-byte SECDED+ code.
+	 * In normal or mirrored mode, it uses Lockstep mode,
+	 * with the possibility of using an extended algorithm for x8 memories
+	 * See datasheet Sections 7.3.6 to 7.3.8
+	 */
+
+	if (IS_SINGLE_MODE(pvt->mc_settings_a)) {
+		p_csrow->edac_mode = EDAC_SECDED;
+		debugf2("\t\tECC code is 8-byte-over-32-byte SECDED+ code\n");
+	} else {
+		debugf2("\t\tECC code is on Lockstep mode\n");
+		if (MTR_DRAM_WIDTH(mtr) == 8)
+			p_csrow->edac_mode = EDAC_S8ECD8ED;
+		else
+			p_csrow->edac_mode = EDAC_S4ECD4ED;
+	}
+
+	/* ask what device type on this row */
+	if (MTR_DRAM_WIDTH(mtr) == 8) {
+		debugf2("\t\tScrub algorithm for x8 is on %s mode\n",
+			IS_SCRBALGO_ENHANCED(pvt->mc_settings) ?
+					    "enhanced" : "normal");
+
+		p_csrow->dtype = DEV_X8;
+	} else
+		p_csrow->dtype = DEV_X4;
+
+	return mtr;
+}
+
+/**
+ * print_dimm_size() - Prints dump of the memory organization
+ * @pvt: pointer to the private data struct used by i7300 driver
+ *
+ * Useful for debug. If debug is disabled, this routine do nothing
+ */
+static void print_dimm_size(struct i7300_pvt *pvt)
+{
+#ifdef CONFIG_EDAC_DEBUG
+	struct i7300_dimm_info *dinfo;
+	char *p;
+	int space, n;
+	int channel, slot;
+
+	space = PAGE_SIZE;
+	p = pvt->tmp_prt_buffer;
+
+	n = snprintf(p, space, "              ");
+	p += n;
+	space -= n;
+	for (channel = 0; channel < MAX_CHANNELS; channel++) {
+		n = snprintf(p, space, "channel %d | ", channel);
+		p += n;
+		space -= n;
+	}
+	debugf2("%s\n", pvt->tmp_prt_buffer);
+	p = pvt->tmp_prt_buffer;
+	space = PAGE_SIZE;
+	n = snprintf(p, space, "-------------------------------"
+			       "------------------------------");
+	p += n;
+	space -= n;
+	debugf2("%s\n", pvt->tmp_prt_buffer);
+	p = pvt->tmp_prt_buffer;
+	space = PAGE_SIZE;
+
+	for (slot = 0; slot < MAX_SLOTS; slot++) {
+		n = snprintf(p, space, "csrow/SLOT %d  ", slot);
+		p += n;
+		space -= n;
+
+		for (channel = 0; channel < MAX_CHANNELS; channel++) {
+			dinfo = &pvt->dimm_info[slot][channel];
+			n = snprintf(p, space, "%4d MB   | ", dinfo->megabytes);
+			p += n;
+			space -= n;
+		}
+
+		debugf2("%s\n", pvt->tmp_prt_buffer);
+		p = pvt->tmp_prt_buffer;
+		space = PAGE_SIZE;
+	}
+
+	n = snprintf(p, space, "-------------------------------"
+			       "------------------------------");
+	p += n;
+	space -= n;
+	debugf2("%s\n", pvt->tmp_prt_buffer);
+	p = pvt->tmp_prt_buffer;
+	space = PAGE_SIZE;
+#endif
+}
+
+/**
+ * i7300_init_csrows() - Initialize the 'csrows' table within
+ *			 the mci control structure with the
+ *			 addressing of memory.
+ * @mci: struct mem_ctl_info pointer
+ */
+static int i7300_init_csrows(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	struct i7300_dimm_info *dinfo;
+	struct csrow_info *p_csrow;
+	int rc = -ENODEV;
+	int mtr;
+	int ch, branch, slot, channel;
+	u32 last_page = 0, nr_pages;
+
+	pvt = mci->pvt_info;
+
+	debugf2("Memory Technology Registers:\n");
+
+	/* Get the AMB present registers for the four channels */
+	for (branch = 0; branch < MAX_BRANCHES; branch++) {
+		/* Read and dump branch 0's MTRs */
+		channel = to_channel(0, branch);
+		pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
+				     AMBPRESENT_0,
+				&pvt->ambpresent[channel]);
+		debugf2("\t\tAMB-present CH%d = 0x%x:\n",
+			channel, pvt->ambpresent[channel]);
+
+		channel = to_channel(1, branch);
+		pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
+				     AMBPRESENT_1,
+				&pvt->ambpresent[channel]);
+		debugf2("\t\tAMB-present CH%d = 0x%x:\n",
+			channel, pvt->ambpresent[channel]);
+	}
+
+	/* Get the set of MTR[0-7] regs by each branch */
+	for (slot = 0; slot < MAX_SLOTS; slot++) {
+		int where = mtr_regs[slot];
+		for (branch = 0; branch < MAX_BRANCHES; branch++) {
+			pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch],
+					where,
+					&pvt->mtr[slot][branch]);
+			for (ch = 0; ch < MAX_BRANCHES; ch++) {
+				int channel = to_channel(ch, branch);
+
+				dinfo = &pvt->dimm_info[slot][channel];
+				p_csrow = &mci->csrows[slot];
+
+				mtr = decode_mtr(pvt, slot, ch, branch,
+						 dinfo, p_csrow, &nr_pages);
+				/* if no DIMMS on this row, continue */
+				if (!MTR_DIMMS_PRESENT(mtr))
+					continue;
+
+				/* Update per_csrow memory count */
+				p_csrow->nr_pages += nr_pages;
+				p_csrow->first_page = last_page;
+				last_page += nr_pages;
+				p_csrow->last_page = last_page;
+
+				rc = 0;
+			}
+		}
+	}
+
+	return rc;
+}
+
+/**
+ * decode_mir() - Decodes Memory Interleave Register (MIR) info
+ * @int mir_no: number of the MIR register to decode
+ * @mir: array with the MIR data cached on the driver
+ */
+static void decode_mir(int mir_no, u16 mir[MAX_MIR])
+{
+	if (mir[mir_no] & 3)
+		debugf2("MIR%d: limit= 0x%x Branch(es) that participate:"
+			" %s %s\n",
+			mir_no,
+			(mir[mir_no] >> 4) & 0xfff,
+			(mir[mir_no] & 1) ? "B0" : "",
+			(mir[mir_no] & 2) ? "B1" : "");
+}
+
+/**
+ * i7300_get_mc_regs() - Get the contents of the MC enumeration registers
+ * @mci: struct mem_ctl_info pointer
+ *
+ * Data read is cached internally for its usage when needed
+ */
+static int i7300_get_mc_regs(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 actual_tolm;
+	int i, rc;
+
+	pvt = mci->pvt_info;
+
+	pci_read_config_dword(pvt->pci_dev_16_0_fsb_ctlr, AMBASE,
+			(u32 *) &pvt->ambase);
+
+	debugf2("AMBASE= 0x%lx\n", (long unsigned int)pvt->ambase);
+
+	/* Get the Branch Map regs */
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, TOLM, &pvt->tolm);
+	pvt->tolm >>= 12;
+	debugf2("TOLM (number of 256M regions) =%u (0x%x)\n", pvt->tolm,
+		pvt->tolm);
+
+	actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28));
+	debugf2("Actual TOLM byte addr=%u.%03u GB (0x%x)\n",
+		actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28);
+
+	/* Get memory controller settings */
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS,
+			     &pvt->mc_settings);
+	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS_A,
+			     &pvt->mc_settings_a);
+
+	if (IS_SINGLE_MODE(pvt->mc_settings_a))
+		debugf0("Memory controller operating on single mode\n");
+	else
+		debugf0("Memory controller operating on %s mode\n",
+		IS_MIRRORED(pvt->mc_settings) ? "mirrored" : "non-mirrored");
+
+	debugf0("Error detection is %s\n",
+		IS_ECC_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");
+	debugf0("Retry is %s\n",
+		IS_RETRY_ENABLED(pvt->mc_settings) ? "enabled" : "disabled");
+
+	/* Get Memory Interleave Range registers */
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR0,
+			     &pvt->mir[0]);
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR1,
+			     &pvt->mir[1]);
+	pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR2,
+			     &pvt->mir[2]);
+
+	/* Decode the MIR regs */
+	for (i = 0; i < MAX_MIR; i++)
+		decode_mir(i, pvt->mir);
+
+	rc = i7300_init_csrows(mci);
+	if (rc < 0)
+		return rc;
+
+	/* Go and determine the size of each DIMM and place in an
+	 * orderly matrix */
+	print_dimm_size(pvt);
+
+	return 0;
+}
+
+/*************************************************
+ * i7300 Functions related to device probe/release
+ *************************************************/
+
+/**
+ * i7300_put_devices() - Release the PCI devices
+ * @mci: struct mem_ctl_info pointer
+ */
+static void i7300_put_devices(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	int branch;
+
+	pvt = mci->pvt_info;
+
+	/* Decrement usage count for devices */
+	for (branch = 0; branch < MAX_CH_PER_BRANCH; branch++)
+		pci_dev_put(pvt->pci_dev_2x_0_fbd_branch[branch]);
+	pci_dev_put(pvt->pci_dev_16_2_fsb_err_regs);
+	pci_dev_put(pvt->pci_dev_16_1_fsb_addr_map);
+}
+
+/**
+ * i7300_get_devices() - Find and perform 'get' operation on the MCH's
+ *			 device/functions we want to reference for this driver
+ * @mci: struct mem_ctl_info pointer
+ *
+ * Access and prepare the several devices for usage:
+ * I7300 devices used by this driver:
+ *    Device 16, functions 0,1 and 2:	PCI_DEVICE_ID_INTEL_I7300_MCH_ERR
+ *    Device 21 function 0:		PCI_DEVICE_ID_INTEL_I7300_MCH_FB0
+ *    Device 22 function 0:		PCI_DEVICE_ID_INTEL_I7300_MCH_FB1
+ */
+static int __devinit i7300_get_devices(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	struct pci_dev *pdev;
+
+	pvt = mci->pvt_info;
+
+	/* Attempt to 'get' the MCH register we want */
+	pdev = NULL;
+	while (!pvt->pci_dev_16_1_fsb_addr_map ||
+	       !pvt->pci_dev_16_2_fsb_err_regs) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7300_MCH_ERR, pdev);
+		if (!pdev) {
+			/* End of list, leave */
+			i7300_printk(KERN_ERR,
+				"'system address,Process Bus' "
+				"device not found:"
+				"vendor 0x%x device 0x%x ERR funcs "
+				"(broken BIOS?)\n",
+				PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_I7300_MCH_ERR);
+			goto error;
+		}
+
+		/* Store device 16 funcs 1 and 2 */
+		switch (PCI_FUNC(pdev->devfn)) {
+		case 1:
+			pvt->pci_dev_16_1_fsb_addr_map = pdev;
+			break;
+		case 2:
+			pvt->pci_dev_16_2_fsb_err_regs = pdev;
+			break;
+		}
+	}
+
+	debugf1("System Address, processor bus- PCI Bus ID: %s  %x:%x\n",
+		pci_name(pvt->pci_dev_16_0_fsb_ctlr),
+		pvt->pci_dev_16_0_fsb_ctlr->vendor,
+		pvt->pci_dev_16_0_fsb_ctlr->device);
+	debugf1("Branchmap, control and errors - PCI Bus ID: %s  %x:%x\n",
+		pci_name(pvt->pci_dev_16_1_fsb_addr_map),
+		pvt->pci_dev_16_1_fsb_addr_map->vendor,
+		pvt->pci_dev_16_1_fsb_addr_map->device);
+	debugf1("FSB Error Regs - PCI Bus ID: %s  %x:%x\n",
+		pci_name(pvt->pci_dev_16_2_fsb_err_regs),
+		pvt->pci_dev_16_2_fsb_err_regs->vendor,
+		pvt->pci_dev_16_2_fsb_err_regs->device);
+
+	pvt->pci_dev_2x_0_fbd_branch[0] = pci_get_device(PCI_VENDOR_ID_INTEL,
+					    PCI_DEVICE_ID_INTEL_I7300_MCH_FB0,
+					    NULL);
+	if (!pvt->pci_dev_2x_0_fbd_branch[0]) {
+		i7300_printk(KERN_ERR,
+			"MC: 'BRANCH 0' device not found:"
+			"vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_FB0);
+		goto error;
+	}
+
+	pvt->pci_dev_2x_0_fbd_branch[1] = pci_get_device(PCI_VENDOR_ID_INTEL,
+					    PCI_DEVICE_ID_INTEL_I7300_MCH_FB1,
+					    NULL);
+	if (!pvt->pci_dev_2x_0_fbd_branch[1]) {
+		i7300_printk(KERN_ERR,
+			"MC: 'BRANCH 1' device not found:"
+			"vendor 0x%x device 0x%x Func 0 "
+			"(broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_I7300_MCH_FB1);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	i7300_put_devices(mci);
+	return -ENODEV;
+}
+
+/**
+ * i7300_init_one() - Probe for one instance of the device
+ * @pdev: struct pci_dev pointer
+ * @id: struct pci_device_id pointer - currently unused
+ */
+static int __devinit i7300_init_one(struct pci_dev *pdev,
+				    const struct pci_device_id *id)
+{
+	struct mem_ctl_info *mci;
+	struct i7300_pvt *pvt;
+	int num_channels;
+	int num_dimms_per_channel;
+	int num_csrows;
+	int rc;
+
+	/* wake up device */
+	rc = pci_enable_device(pdev);
+	if (rc == -EIO)
+		return rc;
+
+	debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+		__func__,
+		pdev->bus->number,
+		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+	/* We only are looking for func 0 of the set */
+	if (PCI_FUNC(pdev->devfn) != 0)
+		return -ENODEV;
+
+	/* As we don't have a motherboard identification routine to determine
+	 * actual number of slots/dimms per channel, we thus utilize the
+	 * resource as specified by the chipset. Thus, we might have
+	 * have more DIMMs per channel than actually on the mobo, but this
+	 * allows the driver to support upto the chipset max, without
+	 * some fancy mobo determination.
+	 */
+	num_dimms_per_channel = MAX_SLOTS;
+	num_channels = MAX_CHANNELS;
+	num_csrows = MAX_SLOTS * MAX_CHANNELS;
+
+	debugf0("MC: %s(): Number of - Channels= %d  DIMMS= %d  CSROWS= %d\n",
+		__func__, num_channels, num_dimms_per_channel, num_csrows);
+
+	/* allocate a new MC control structure */
+	mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0);
+
+	if (mci == NULL)
+		return -ENOMEM;
+
+	debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+	mci->dev = &pdev->dev;	/* record ptr  to the generic device */
+
+	pvt = mci->pvt_info;
+	pvt->pci_dev_16_0_fsb_ctlr = pdev;	/* Record this device in our private */
+
+	pvt->tmp_prt_buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!pvt->tmp_prt_buffer) {
+		edac_mc_free(mci);
+		return -ENOMEM;
+	}
+
+	/* 'get' the pci devices we want to reserve for our use */
+	if (i7300_get_devices(mci))
+		goto fail0;
+
+	mci->mc_idx = 0;
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i7300_edac.c";
+	mci->mod_ver = I7300_REVISION;
+	mci->ctl_name = i7300_devs[0].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i7300_check_error;
+
+	/* initialize the MC control structure 'csrows' table
+	 * with the mapping and control information */
+	if (i7300_get_mc_regs(mci)) {
+		debugf0("MC: Setting mci->edac_cap to EDAC_FLAG_NONE\n"
+			"    because i7300_init_csrows() returned nonzero "
+			"value\n");
+		mci->edac_cap = EDAC_FLAG_NONE;	/* no csrows found */
+	} else {
+		debugf1("MC: Enable error reporting now\n");
+		i7300_enable_error_reporting(mci);
+	}
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (edac_mc_add_mc(mci)) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mc_add_mc()\n", __func__);
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+		goto fail1;
+	}
+
+	i7300_clear_error(mci);
+
+	/* allocating generic PCI control info */
+	i7300_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i7300_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	return 0;
+
+	/* Error exit unwinding stack */
+fail1:
+
+	i7300_put_devices(mci);
+
+fail0:
+	kfree(pvt->tmp_prt_buffer);
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/**
+ * i7300_remove_one() - Remove the driver
+ * @pdev: struct pci_dev pointer
+ */
+static void __devexit i7300_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+	char *tmp;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+
+	if (i7300_pci)
+		edac_pci_release_generic_ctl(i7300_pci);
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	tmp = ((struct i7300_pvt *)mci->pvt_info)->tmp_prt_buffer;
+
+	/* retrieve references to resources, and free those resources */
+	i7300_put_devices(mci);
+
+	kfree(tmp);
+	edac_mc_free(mci);
+}
+
+/*
+ * pci_device_id: table for which devices we are looking for
+ *
+ * Has only 8086:360c PCI ID
+ */
+static const struct pci_device_id i7300_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_ERR)},
+	{0,}			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i7300_pci_tbl);
+
+/*
+ * i7300_driver: pci_driver structure for this module
+ */
+static struct pci_driver i7300_driver = {
+	.name = "i7300_edac",
+	.probe = i7300_init_one,
+	.remove = __devexit_p(i7300_remove_one),
+	.id_table = i7300_pci_tbl,
+};
+
+/**
+ * i7300_init() - Registers the driver
+ */
+static int __init i7300_init(void)
+{
+	int pci_rc;
+
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&i7300_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+/**
+ * i7300_init() - Unregisters the driver
+ */
+static void __exit i7300_exit(void)
+{
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+	pci_unregister_driver(&i7300_driver);
+}
+
+module_init(i7300_init);
+module_exit(i7300_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel I7300 memory controllers - "
+		   I7300_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 90c038c0ad9..d278dd9cb76 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -820,7 +820,7 @@
 
 #define PCI_VENDOR_ID_ANIGMA		0x1051
 #define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
-  
+
 #define PCI_VENDOR_ID_EFAR		0x1055
 #define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
 #define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
@@ -1451,7 +1451,7 @@
 
 #define PCI_VENDOR_ID_ZIATECH		0x1138
 #define PCI_DEVICE_ID_ZIATECH_5550_HC	0x5550
- 
+
 
 #define PCI_VENDOR_ID_SYSKONNECT	0x1148
 #define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
@@ -1605,8 +1605,8 @@
 #define PCI_DEVICE_ID_RP8OCTA		0x0005
 #define PCI_DEVICE_ID_RP8J		0x0006
 #define PCI_DEVICE_ID_RP4J		0x0007
-#define PCI_DEVICE_ID_RP8SNI		0x0008	
-#define PCI_DEVICE_ID_RP16SNI		0x0009	
+#define PCI_DEVICE_ID_RP8SNI		0x0008
+#define PCI_DEVICE_ID_RP16SNI		0x0009
 #define PCI_DEVICE_ID_RPP4		0x000A
 #define PCI_DEVICE_ID_RPP8		0x000B
 #define PCI_DEVICE_ID_RP4M		0x000D
@@ -1616,9 +1616,9 @@
 #define PCI_DEVICE_ID_URP8INTF		0x0802
 #define PCI_DEVICE_ID_URP16INTF		0x0803
 #define PCI_DEVICE_ID_URP8OCTA		0x0805
-#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C       
+#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C
 #define PCI_DEVICE_ID_UPCI_RM3_4PORT	0x080D
-#define PCI_DEVICE_ID_CRP16INTF		0x0903       
+#define PCI_DEVICE_ID_CRP16INTF		0x0903
 
 #define PCI_VENDOR_ID_CYCLADES		0x120e
 #define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
@@ -2144,7 +2144,7 @@
 #define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
 
 #define PCI_VENDOR_ID_ZOLTRIX		0x15b0
-#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0 
+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0
 
 #define PCI_VENDOR_ID_MELLANOX		0x15b3
 #define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
@@ -2431,7 +2431,7 @@
 #define PCI_DEVICE_ID_INTEL_82815_MC	0x1130
 #define PCI_DEVICE_ID_INTEL_82815_CGC	0x1132
 #define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
-#define PCI_DEVICE_ID_INTEL_7505_0	0x2550  
+#define PCI_DEVICE_ID_INTEL_7505_0	0x2550
 #define PCI_DEVICE_ID_INTEL_7205_0	0x255d
 #define PCI_DEVICE_ID_INTEL_82437	0x122d
 #define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
@@ -2634,6 +2634,9 @@
 #define PCI_DEVICE_ID_INTEL_MCH_PC	0x3599
 #define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
 #define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_ERR 0x360c
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 0x360f
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 0x3610
 #define PCI_DEVICE_ID_INTEL_IOAT_CNB	0x360b
 #define PCI_DEVICE_ID_INTEL_FBD_CNB	0x360c
 #define PCI_DEVICE_ID_INTEL_IOAT_JSF0	0x3710