Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix build failures in board code
  avr32: Allow selecting multiple pins at once
  avr32: Minor pm_power_off cleanup
  avr32: Implement {read,write}[bwl]_be
  avr32: Replace static clock list with dynamic linked list
  avr32: Use platform_driver_probe for pdc platform driver
  avr32: Use platform_driver_probe for pio platform driver
  avr32: Provide a way to deselect pins in the portmux
  ngw100: export J15 through sysfs
  avr32: Allow fine-grained control over LCDC pins
  avr32: added mem kernel command line option support
  Add kernel support for oprofile callgraphs on AVR32
  avr32: use the new byteorder headers

20 files changed, 578 insertions, 247 deletions

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index f3085208959..6c54580a66d 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,7 @@
  */
 #include <linux/clk.h>
 #include <linux/etherdevice.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -193,7 +194,7 @@ static int __init atngw100_init(void)
 	 * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus),
 	 * but it's not available off-board.
 	 */
-	at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP);
+	at32_select_periph(GPIO_PIOB_BASE, 1 << 28, 0, AT32_GPIOF_PULLUP);
 	at32_select_gpio(i2c_gpio_data.sda_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	at32_select_gpio(i2c_gpio_data.scl_pin,
@@ -207,6 +208,15 @@ postcore_initcall(atngw100_init);
 
 static int __init atngw100_arch_init(void)
 {
+	/* PB30 is the otherwise unused jumper on the mainboard, with an
+	 * external pullup; the jumper grounds it.  Use it however you
+	 * like, including letting U-Boot or Linux tweak boot sequences.
+	 */
+	at32_select_gpio(GPIO_PIN_PB(30), 0);
+	gpio_request(GPIO_PIN_PB(30), "j15");
+	gpio_direction_input(GPIO_PIN_PB(30));
+	gpio_export(GPIO_PIN_PB(30), false);
+
 	/* set_irq_type() after the arch_initcall for EIC has run, and
 	 * before the I2C subsystem could try using this IRQ.
 	 */
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 4fedbc4488d..29e5b51a7fd 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -232,7 +232,7 @@ static void __init atstk1002_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
@@ -330,13 +330,14 @@ static int __init atstk1002_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0, &mci0_pdata);
+	at32_add_device_mci(0, &mci0_data);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size, 0);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index acc61235b89..be089d7f37e 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -19,6 +19,7 @@
 #include <linux/spi/spi.h>
 
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -94,7 +95,7 @@ static void __init atstk1003_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index d6a2d02f032..248ef237c16 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -21,6 +21,7 @@
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
+#include <asm/atmel-mci.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
@@ -99,7 +100,7 @@ static void __init atstk1004_setup_extdac(void)
 		goto err_set_clk;
 	}
 
-	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0);
 	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
@@ -150,7 +151,8 @@ static int __init atstk1004_init(void)
 	at32_add_device_mci(0, &mci0_data);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size, 0);
+			     fbmem_start, fbmem_size,
+			     ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL);
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
 	at32_add_device_ssc(0, ATMEL_SSC_TX);
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
index d77b48ba733..8e3af02076d 100644
--- a/arch/avr32/include/asm/byteorder.h
+++ b/arch/avr32/include/asm/byteorder.h
@@ -7,6 +7,9 @@
 #include <asm/types.h>
 #include <linux/compiler.h>
 
+#define __BIG_ENDIAN
+#define __SWAB_64_THRU_32__
+
 #ifdef __CHECKER__
 extern unsigned long __builtin_bswap_32(unsigned long x);
 extern unsigned short __builtin_bswap_16(unsigned short x);
@@ -17,15 +20,18 @@ extern unsigned short __builtin_bswap_16(unsigned short x);
  * the result.
  */
 #if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
-#define __arch__swab32(x) __builtin_bswap_32(x)
-#define __arch__swab16(x) __builtin_bswap_16(x)
-#endif
+static inline __attribute_const__ __u16 __arch_swab16(__u16 val)
+{
+	return __builtin_bswap_16(val);
+}
+#define __arch_swab16 __arch_swab16
 
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+	return __builtin_bswap_32(val);
+}
+#define __arch_swab32 __arch_swab32
 #endif
 
-#include <linux/byteorder/big_endian.h>
-
+#include <linux/byteorder.h>
 #endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
index a520f77ead9..22c97ef9220 100644
--- a/arch/avr32/include/asm/io.h
+++ b/arch/avr32/include/asm/io.h
@@ -160,6 +160,14 @@ BUILDIO_IOPORT(l, u32)
 #define readw_relaxed			readw
 #define readl_relaxed			readl
 
+#define readb_be			__raw_readb
+#define readw_be			__raw_readw
+#define readl_be			__raw_readl
+
+#define writeb_be			__raw_writeb
+#define writew_be			__raw_writew
+#define writel_be			__raw_writel
+
 #define __BUILD_MEMORY_STRING(bwl, type)				\
 static inline void writes##bwl(volatile void __iomem *addr,		\
 			       const void *data, unsigned int count)	\
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 2c08ac992ac..134d5302b6d 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/fs.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
 #include <linux/tick.h>
@@ -20,7 +21,7 @@
 
 #include <mach/pm.h>
 
-void (*pm_power_off)(void) = NULL;
+void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
 /*
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index d8e623c426c..5c7083916c3 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -283,6 +283,25 @@ static int __init early_parse_fbmem(char *p)
 }
 early_param("fbmem", early_parse_fbmem);
 
+/*
+ * Pick out the memory size.  We look for mem=size@start,
+ * where start and size are "size[KkMmGg]"
+ */
+static int __init early_mem(char *p)
+{
+	resource_size_t size, start;
+
+	start = system_ram->start;
+	size  = memparse(p, &p);
+	if (*p == '@')
+		start = memparse(p + 1, &p);
+
+	system_ram->start = start;
+	system_ram->end = system_ram->start + size - 1;
+	return 0;
+}
+early_param("mem", early_mem);
+
 static int __init parse_tag_core(struct tag *tag)
 {
 	if (tag->hdr.size > 2) {
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index f1b9a3ac273..813b6844cdf 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -82,8 +82,9 @@ static struct platform_device _name##_id##_device = {		\
 	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
 }
 
-#define select_peripheral(pin, periph, flags)			\
-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+#define select_peripheral(port, pin_mask, periph, flags)	\
+	at32_select_periph(GPIO_##port##_BASE, pin_mask,	\
+			   GPIO_##periph, flags)
 
 #define DEV_CLK(_name, devname, bus, _index)			\
 static struct clk devname##_##_name = {				\
@@ -871,6 +872,7 @@ static struct clk atmel_psif1_pclk = {
 struct platform_device *__init at32_add_device_psif(unsigned int id)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (!(id == 0 || id == 1))
 		return NULL;
@@ -881,20 +883,22 @@ struct platform_device *__init at32_add_device_psif(unsigned int id)
 
 	switch (id) {
 	case 0:
+		pin_mask  = (1 << 8) | (1 << 9); /* CLOCK & DATA */
+
 		if (platform_device_add_resources(pdev, atmel_psif0_resource,
 					ARRAY_SIZE(atmel_psif0_resource)))
 			goto err_add_resources;
 		atmel_psif0_pclk.dev = &pdev->dev;
-		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
-		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 		break;
 	case 1:
+		pin_mask  = (1 << 11) | (1 << 12); /* CLOCK & DATA */
+
 		if (platform_device_add_resources(pdev, atmel_psif1_resource,
 					ARRAY_SIZE(atmel_psif1_resource)))
 			goto err_add_resources;
 		atmel_psif1_pclk.dev = &pdev->dev;
-		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
-		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
+		select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
 		break;
 	default:
 		return NULL;
@@ -958,26 +962,30 @@ DEV_CLK(usart, atmel_usart3, pba, 6);
 
 static inline void configure_usart0_pins(void)
 {
-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
 }
 
 static inline void configure_usart1_pins(void)
 {
-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 }
 
 static inline void configure_usart2_pins(void)
 {
-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 }
 
 static inline void configure_usart3_pins(void)
 {
-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
+
+	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 }
 
 static struct platform_device *__initdata at32_usarts[4];
@@ -1057,59 +1065,69 @@ struct platform_device *__init
 at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	switch (id) {
 	case 0:
 		pdev = &macb0_device;
 
-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+		pin_mask  = (1 << 3);	/* TXD0 */
+		pin_mask |= (1 << 4);	/* TXD1 */
+		pin_mask |= (1 << 7);	/* TXEN */
+		pin_mask |= (1 << 8);	/* TXCK */
+		pin_mask |= (1 << 9);	/* RXD0 */
+		pin_mask |= (1 << 10);	/* RXD1 */
+		pin_mask |= (1 << 13);	/* RXER */
+		pin_mask |= (1 << 15);	/* RXDV */
+		pin_mask |= (1 << 16);	/* MDC  */
+		pin_mask |= (1 << 17);	/* MDIO */
 
 		if (!data->is_rmii) {
-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+			pin_mask |= (1 << 0);	/* COL  */
+			pin_mask |= (1 << 1);	/* CRS  */
+			pin_mask |= (1 << 2);	/* TXER */
+			pin_mask |= (1 << 5);	/* TXD2 */
+			pin_mask |= (1 << 6);	/* TXD3 */
+			pin_mask |= (1 << 11);	/* RXD2 */
+			pin_mask |= (1 << 12);	/* RXD3 */
+			pin_mask |= (1 << 14);	/* RXCK */
+			pin_mask |= (1 << 18);	/* SPD  */
 		}
+
+		select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
+
 		break;
 
 	case 1:
 		pdev = &macb1_device;
 
-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+		pin_mask  = (1 << 13);	/* TXD0 */
+		pin_mask |= (1 << 14);	/* TXD1 */
+		pin_mask |= (1 << 11);	/* TXEN */
+		pin_mask |= (1 << 12);	/* TXCK */
+		pin_mask |= (1 << 10);	/* RXD0 */
+		pin_mask |= (1 << 6);	/* RXD1 */
+		pin_mask |= (1 << 5);	/* RXER */
+		pin_mask |= (1 << 4);	/* RXDV */
+		pin_mask |= (1 << 3);	/* MDC  */
+		pin_mask |= (1 << 2);	/* MDIO */
+
+		if (!data->is_rmii)
+			pin_mask |= (1 << 15);	/* SPD  */
+
+		select_peripheral(PIOD, pin_mask, PERIPH_B, 0);
 
 		if (!data->is_rmii) {
-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+			pin_mask  = (1 << 19);	/* COL  */
+			pin_mask |= (1 << 23);	/* CRS  */
+			pin_mask |= (1 << 26);	/* TXER */
+			pin_mask |= (1 << 27);	/* TXD2 */
+			pin_mask |= (1 << 28);	/* TXD3 */
+			pin_mask |= (1 << 29);	/* RXD2 */
+			pin_mask |= (1 << 30);	/* RXD3 */
+			pin_mask |= (1 << 24);	/* RXCK */
+
+			select_peripheral(PIOC, pin_mask, PERIPH_B, 0);
 		}
 		break;
 
@@ -1177,23 +1195,28 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
 		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	switch (id) {
 	case 0:
 		pdev = &atmel_spi0_device;
+		pin_mask  = (1 << 1) | (1 << 2);	/* MOSI & SCK */
+
 		/* pullup MISO so a level is always defined */
-		select_peripheral(PA(0),  PERIPH_A, AT32_GPIOF_PULLUP);
-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+		select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
 		at32_spi_setup_slaves(0, b, n, spi0_pins);
 		break;
 
 	case 1:
 		pdev = &atmel_spi1_device;
+		pin_mask  = (1 << 1) | (1 << 5);	/* MOSI */
+
 		/* pullup MISO so a level is always defined */
-		select_peripheral(PB(0),  PERIPH_B, AT32_GPIOF_PULLUP);
-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+		select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
+		select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+
 		at32_spi_setup_slaves(1, b, n, spi1_pins);
 		break;
 
@@ -1226,6 +1249,7 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
 						    unsigned int n)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (id != 0)
 		return NULL;
@@ -1238,8 +1262,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id,
 				ARRAY_SIZE(atmel_twi0_resource)))
 		goto err_add_resources;
 
-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
+	pin_mask  = (1 << 6) | (1 << 7);	/* SDA & SDL */
+
+	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 
 	atmel_twi0_pclk.dev = &pdev->dev;
 
@@ -1274,6 +1299,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct platform_device		*pdev;
 	struct dw_dma_slave		*dws;
+	u32				pioa_mask;
+	u32				piob_mask;
 
 	if (id != 0 || !data)
 		return NULL;
@@ -1311,17 +1338,17 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 		goto fail;
 
 	/* CLK line is common to both slots */
-	select_peripheral(PA(10), PERIPH_A, 0);
+	pioa_mask = 1 << 10;
 
 	switch (data->slot[0].bus_width) {
 	case 4:
-		select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-		select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-		select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+		pioa_mask |= 1 << 13;		/* DATA1 */
+		pioa_mask |= 1 << 14;		/* DATA2 */
+		pioa_mask |= 1 << 15;		/* DATA3 */
 		/* fall through */
 	case 1:
-		select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-		select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+		pioa_mask |= 1 << 11;		/* CMD	 */
+		pioa_mask |= 1 << 12;		/* DATA0 */
 
 		if (gpio_is_valid(data->slot[0].detect_pin))
 			at32_select_gpio(data->slot[0].detect_pin, 0);
@@ -1335,15 +1362,19 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 		goto fail;
 	}
 
+	select_peripheral(PIOA, pioa_mask, PERIPH_A, 0);
+	piob_mask = 0;
+
 	switch (data->slot[1].bus_width) {
 	case 4:
-		select_peripheral(PB(8),  PERIPH_B, 0);	/* DATA1 */
-		select_peripheral(PB(9),  PERIPH_B, 0);	/* DATA2 */
-		select_peripheral(PB(10), PERIPH_B, 0);	/* DATA3 */
+		piob_mask |= 1 <<  8;		/* DATA1 */
+		piob_mask |= 1 <<  9;		/* DATA2 */
+		piob_mask |= 1 << 10;		/* DATA3 */
 		/* fall through */
 	case 1:
-		select_peripheral(PB(6),  PERIPH_B, 0); /* CMD	 */
-		select_peripheral(PB(7),  PERIPH_B, 0); /* DATA0 */
+		piob_mask |= 1 <<  6;		/* CMD	 */
+		piob_mask |= 1 <<  7;		/* DATA0 */
+		select_peripheral(PIOB, piob_mask, PERIPH_B, 0);
 
 		if (gpio_is_valid(data->slot[1].detect_pin))
 			at32_select_gpio(data->slot[1].detect_pin, 0);
@@ -1405,13 +1436,14 @@ static struct clk atmel_lcdfb0_pixclk = {
 struct platform_device *__init
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len,
-		     unsigned int pin_config)
+		     u64 pin_mask)
 {
 	struct platform_device *pdev;
 	struct atmel_lcdfb_info *info;
 	struct fb_monspecs *monspecs;
 	struct fb_videomode *modedb;
 	unsigned int modedb_size;
+	u32 portc_mask, portd_mask, porte_mask;
 
 	/*
 	 * Do a deep copy of the fb data, monspecs and modedb. Make
@@ -1433,76 +1465,21 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 	case 0:
 		pdev = &atmel_lcdfb0_device;
 
-		switch (pin_config) {
-		case 0:
-			select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-			select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-			select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-			select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-			select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-			select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-			select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-			select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-			select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-			select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-			select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-			select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-			select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-			select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-			select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-			select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-			select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-			select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-			select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-			break;
-		case 1:
-			select_peripheral(PE(0),  PERIPH_B, 0);	/* CC	  */
-			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-			select_peripheral(PE(1),  PERIPH_B, 0);	/* DVAL	  */
-			select_peripheral(PE(2),  PERIPH_B, 0);	/* MODE	  */
-			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-			select_peripheral(PE(3),  PERIPH_B, 0);	/* DATA0  */
-			select_peripheral(PE(4),  PERIPH_B, 0);	/* DATA1  */
-			select_peripheral(PE(5),  PERIPH_B, 0);	/* DATA2  */
-			select_peripheral(PE(6),  PERIPH_B, 0);	/* DATA3  */
-			select_peripheral(PE(7),  PERIPH_B, 0);	/* DATA4  */
-			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-			select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
-			select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
-			select_peripheral(PE(10), PERIPH_B, 0);	/* DATA10 */
-			select_peripheral(PE(11), PERIPH_B, 0);	/* DATA11 */
-			select_peripheral(PE(12), PERIPH_B, 0);	/* DATA12 */
-			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-			select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
-			select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
-			select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
-			select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
-			select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
-			select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
-			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-			break;
-		default:
-			goto err_invalid_id;
-		}
+		if (pin_mask == 0ULL)
+			/* Default to "full" lcdc control signals and 24bit */
+			pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL;
+
+		/* LCDC on port C */
+		portc_mask = (pin_mask & 0xfff80000) >> 19;
+		select_peripheral(PIOC, portc_mask, PERIPH_A, 0);
+
+		/* LCDC on port D */
+		portd_mask = pin_mask & 0x0003ffff;
+		select_peripheral(PIOD, portd_mask, PERIPH_A, 0);
+
+		/* LCDC on port E */
+		porte_mask = (pin_mask >> 32) & 0x0007ffff;
+		select_peripheral(PIOE, porte_mask, PERIPH_B, 0);
 
 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
@@ -1551,6 +1528,7 @@ static struct clk atmel_pwm0_mck = {
 struct platform_device *__init at32_add_device_pwm(u32 mask)
 {
 	struct platform_device *pdev;
+	u32 pin_mask;
 
 	if (!mask)
 		return NULL;
@@ -1566,14 +1544,21 @@ struct platform_device *__init at32_add_device_pwm(u32 mask)
 	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
 		goto out_free_pdev;
 
+	pin_mask = 0;
 	if (mask & (1 << 0))
-		select_peripheral(PA(28), PERIPH_A, 0);
+		pin_mask |= (1 << 28);
 	if (mask & (1 << 1))
-		select_peripheral(PA(29), PERIPH_A, 0);
+		pin_mask |= (1 << 29);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
+	pin_mask = 0;
 	if (mask & (1 << 2))
-		select_peripheral(PA(21), PERIPH_B, 0);
+		pin_mask |= (1 << 21);
 	if (mask & (1 << 3))
-		select_peripheral(PA(22), PERIPH_B, 0);
+		pin_mask |= (1 << 22);
+	if (pin_mask > 0)
+		select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
 
 	atmel_pwm0_mck.dev = &pdev->dev;
 
@@ -1614,52 +1599,65 @@ struct platform_device *__init
 at32_add_device_ssc(unsigned int id, unsigned int flags)
 {
 	struct platform_device *pdev;
+	u32 pin_mask = 0;
 
 	switch (id) {
 	case 0:
 		pdev = &ssc0_device;
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+			pin_mask |= (1 << 21);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+			pin_mask |= (1 << 22);	/* RK */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+			pin_mask |= (1 << 23);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+			pin_mask |= (1 << 24);	/* TF */
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+			pin_mask |= (1 << 25);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+			pin_mask |= (1 << 26);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+
 		break;
 	case 1:
 		pdev = &ssc1_device;
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+			pin_mask |= (1 << 0);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+			pin_mask |= (1 << 1);	/* RK */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+			pin_mask |= (1 << 2);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+			pin_mask |= (1 << 3);	/* TF */
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+			pin_mask |= (1 << 4);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+			pin_mask |= (1 << 5);	/* RD */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+
 		break;
 	case 2:
 		pdev = &ssc2_device;
 		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+			pin_mask |= (1 << 13);	/* TD */
 		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+			pin_mask |= (1 << 14);	/* RD */
 		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+			pin_mask |= (1 << 15);	/* TK */
 		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+			pin_mask |= (1 << 16);	/* TF */
 		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+			pin_mask |= (1 << 17);	/* RF */
 		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+			pin_mask |= (1 << 18);	/* RK */
+
+		if (pin_mask > 0)
+			select_peripheral(PIOB, pin_mask, PERIPH_A, 0);
+
 		break;
 	default:
 		return NULL;
@@ -1797,14 +1795,15 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		unsigned int cs, unsigned int extint)
 {
 	static unsigned int extint_pin_map[4] __initdata = {
-		GPIO_PIN_PB(25),
-		GPIO_PIN_PB(26),
-		GPIO_PIN_PB(27),
-		GPIO_PIN_PB(28),
+		(1 << 25),
+		(1 << 26),
+		(1 << 27),
+		(1 << 28),
 	};
 	static bool common_pins_initialized __initdata = false;
 	unsigned int extint_pin;
 	int ret;
+	u32 pin_mask;
 
 	if (extint >= ARRAY_SIZE(extint_pin_map))
 		return -EINVAL;
@@ -1818,7 +1817,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		if (ret)
 			return ret;
 
-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+		/* NCS4   -> OE_N  */
+		select_peripheral(PIOE, (1 << 21), PERIPH_A, 0);
 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
 		break;
 	case 5:
@@ -1828,7 +1828,8 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 		if (ret)
 			return ret;
 
-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
+		/* NCS5   -> OE_N  */
+		select_peripheral(PIOE, (1 << 22), PERIPH_A, 0);
 		hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
 		break;
 	default:
@@ -1836,14 +1837,17 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
 	}
 
 	if (!common_pins_initialized) {
-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+		pin_mask  = (1 << 19);	/* CFCE1  -> CS0_N */
+		pin_mask |= (1 << 20);	/* CFCE2  -> CS1_N */
+		pin_mask |= (1 << 23);	/* CFRNW  -> DIR   */
+		pin_mask |= (1 << 24);	/* NWAIT  <- IORDY */
+
+		select_peripheral(PIOE, pin_mask, PERIPH_A, 0);
+
 		common_pins_initialized = true;
 	}
 
-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+	select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH);
 
 	pdev->resource[1].start = EIM_IRQ_BASE + extint;
 	pdev->resource[1].end = pdev->resource[1].start;
@@ -1982,6 +1986,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {