cfg80211 API for channels/bitrates, mac80211 and driver conversion

This patch creates new cfg80211 wiphy API for channel and bitrate
registration and converts mac80211 and drivers to the new API. The
old mac80211 API is completely ripped out. All drivers (except ath5k)
are updated to the new API, in many cases I expect that optimisations
can be done.

Along with the regulatory code I've also ripped out the
IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be
unnecessary if the hardware simply gives us whatever channels it wants
to support and we then enable/disable them as required, which is pretty
much required for travelling.

Additionally, the patch adds proper "basic" rate handling for STA
mode interface, AP mode interface will have to have new API added
to allow userspace to set the basic rate set, currently it'll be
empty... However, the basic rate handling will need to be moved to
the BSS conf stuff.

I do expect there to be bugs in this, especially wrt. transmit
power handling where I'm basically clueless about how it should work.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

66 files changed, 2116 insertions, 2781 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 714a6ca30ad..cd5fcc67e95 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -735,6 +735,7 @@ config P54_PCI
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on BROKEN
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 79796186713..7d4218206c4 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -48,6 +48,32 @@ static struct pci_device_id adm8211_pci_id_table[] __devinitdata = {
 	{ 0 }
 };
 
+static struct ieee80211_rate adm8211_rates[] = {
+	{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 220, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, /* XX ?? */
+};
+
+static const struct ieee80211_channel adm8211_channels[] = {
+	{ .center_freq = 2412},
+	{ .center_freq = 2417},
+	{ .center_freq = 2422},
+	{ .center_freq = 2427},
+	{ .center_freq = 2432},
+	{ .center_freq = 2437},
+	{ .center_freq = 2442},
+	{ .center_freq = 2447},
+	{ .center_freq = 2452},
+	{ .center_freq = 2457},
+	{ .center_freq = 2462},
+	{ .center_freq = 2467},
+	{ .center_freq = 2472},
+	{ .center_freq = 2484},
+};
+
+
 static void adm8211_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 {
 	struct adm8211_priv *priv = eeprom->data;
@@ -155,17 +181,17 @@ static int adm8211_read_eeprom(struct ieee80211_hw *dev)
 	printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
 	       pci_name(priv->pdev), (int)chan_range.min, (int)chan_range.max);
 
-	priv->modes[0].num_channels = chan_range.max - chan_range.min + 1;
-	priv->modes[0].channels = priv->channels;
+	BUILD_BUG_ON(sizeof(priv->channels) != sizeof(adm8211_channels));
 
-	memcpy(priv->channels, adm8211_channels, sizeof(adm8211_channels));
+	memcpy(priv->channels, adm8211_channels, sizeof(priv->channels));
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = ARRAY_SIZE(adm8211_channels);
+	priv->band.bitrates = adm8211_rates;
+	priv->band.n_bitrates = ARRAY_SIZE(adm8211_rates);
 
 	for (i = 1; i <= ARRAY_SIZE(adm8211_channels); i++)
-		if (i >= chan_range.min && i <= chan_range.max)
-			priv->channels[i - 1].flag =
-				IEEE80211_CHAN_W_SCAN |
-				IEEE80211_CHAN_W_ACTIVE_SCAN |
-				IEEE80211_CHAN_W_IBSS;
+		if (i < chan_range.min || i > chan_range.max)
+			priv->channels[i - 1].flags |= IEEE80211_CHAN_DISABLED;
 
 	switch (priv->eeprom->specific_bbptype) {
 	case ADM8211_BBP_RFMD3000:
@@ -347,7 +373,6 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
 	unsigned int pktlen;
 	struct sk_buff *skb, *newskb;
 	unsigned int limit = priv->rx_ring_size;
-	static const u8 rate_tbl[] = {10, 20, 55, 110, 220};
 	u8 rssi, rate;
 
 	while (!(priv->rx_ring[entry].status & cpu_to_le32(RDES0_STATUS_OWN))) {
@@ -425,12 +450,10 @@ static void adm8211_interrupt_rci(struct ieee80211_hw *dev)
 			else
 				rx_status.ssi = 100 - rssi;
 
-			if (rate <= 4)
-				rx_status.rate = rate_tbl[rate];
+			rx_status.rate_idx = rate;
 
-			rx_status.channel = priv->channel;
-			rx_status.freq = adm8211_channels[priv->channel - 1].freq;
-			rx_status.phymode = MODE_IEEE80211B;
+			rx_status.freq = adm8211_channels[priv->channel - 1].center_freq;
+			rx_status.band = IEEE80211_BAND_2GHZ;
 
 			ieee80211_rx_irqsafe(dev, skb, &rx_status);
 		}
@@ -1054,7 +1077,7 @@ static int adm8211_set_rate(struct ieee80211_hw *dev)
 	if (priv->pdev->revision != ADM8211_REV_BA) {
 		rate_buf[0] = ARRAY_SIZE(adm8211_rates);
 		for (i = 0; i < ARRAY_SIZE(adm8211_rates); i++)
-			rate_buf[i + 1] = (adm8211_rates[i].rate / 5) | 0x80;
+			rate_buf[i + 1] = (adm8211_rates[i].bitrate / 5) | 0x80;
 	} else {
 		/* workaround for rev BA specific bug */
 		rate_buf[0] = 0x04;
@@ -1303,9 +1326,10 @@ static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len)
 static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 {
 	struct adm8211_priv *priv = dev->priv;
+	int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
 
-	if (conf->channel != priv->channel) {
-		priv->channel = conf->channel;
+	if (channel != priv->channel) {
+		priv->channel = channel;
 		adm8211_rf_set_channel(dev, priv->channel);
 	}
 
@@ -1680,10 +1704,10 @@ static int adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
 
 	if (control->tx_rate < 0) {
 		short_preamble = 1;
-		plcp_signal = -control->tx_rate;
+		plcp_signal = -control->tx_rate->bitrate;
 	} else {
 		short_preamble = 0;
-		plcp_signal = control->tx_rate;
+		plcp_signal = control->tx_rate->bitrate;
 	}
 
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -1880,18 +1904,11 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 	SET_IEEE80211_PERM_ADDR(dev, perm_addr);
 
 	dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
-	dev->flags = IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED;
-	/* IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
+	/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
 
 	dev->channel_change_time = 1000;
 	dev->max_rssi = 100;	/* FIXME: find better value */
 
-	priv->modes[0].mode = MODE_IEEE80211B;
-	/* channel info filled in by adm8211_read_eeprom */
-	memcpy(priv->rates, adm8211_rates, sizeof(adm8211_rates));
-	priv->modes[0].num_rates = ARRAY_SIZE(adm8211_rates);
-	priv->modes[0].rates = priv->rates;
-
 	dev->queues = 1; /* ADM8211C supports more, maybe ADM8211B too */
 
 	priv->retry_limit = 3;
@@ -1917,14 +1934,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 		goto err_free_desc;
 	}
 
-	priv->channel = priv->modes[0].channels[0].chan;
-
-	err = ieee80211_register_hwmode(dev, &priv->modes[0]);
-	if (err) {
-		printk(KERN_ERR "%s (adm8211): Can't register hwmode\n",
-		       pci_name(pdev));
-		goto err_free_desc;
-	}
+	priv->channel = 1;
 
 	err = ieee80211_register_hw(dev);
 	if (err) {
diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h
index ef326fed42e..8d7c564b3b0 100644
--- a/drivers/net/wireless/adm8211.h
+++ b/drivers/net/wireless/adm8211.h
@@ -534,61 +534,6 @@ struct adm8211_eeprom {
 	u8	cis_data[0];		/* 0x80, 384 bytes */
 } __attribute__ ((packed));
 
-static const struct ieee80211_rate adm8211_rates[] = {
-	{ .rate = 10,
-	  .val = 10,
-	  .val2 = -10,
-	  .flags = IEEE80211_RATE_CCK_2 },
-	{ .rate = 20,
-	  .val = 20,
-	  .val2 = -20,
-	  .flags = IEEE80211_RATE_CCK_2 },
-	{ .rate = 55,
-	  .val = 55,
-	  .val2 = -55,
-	  .flags = IEEE80211_RATE_CCK_2 },
-	{ .rate = 110,
-	  .val = 110,
-	  .val2 = -110,
-	  .flags = IEEE80211_RATE_CCK_2 }
-};
-
-struct ieee80211_chan_range {
-	u8 min;
-	u8 max;
-};
-
-static const struct ieee80211_channel adm8211_channels[] = {
-	{ .chan = 1,
-	  .freq = 2412},
-	{ .chan = 2,
-	  .freq = 2417},
-	{ .chan = 3,
-	  .freq = 2422},
-	{ .chan = 4,
-	  .freq = 2427},
-	{ .chan = 5,
-	  .freq = 2432},
-	{ .chan = 6,
-	  .freq = 2437},
-	{ .chan = 7,
-	  .freq = 2442},
-	{ .chan = 8,
-	  .freq = 2447},
-	{ .chan = 9,
-	  .freq = 2452},
-	{ .chan = 10,
-	  .freq = 2457},
-	{ .chan = 11,
-	  .freq = 2462},
-	{ .chan = 12,
-	  .freq = 2467},
-	{ .chan = 13,
-	  .freq = 2472},
-	{ .chan = 14,
-	  .freq = 2484},
-};
-
 struct adm8211_priv {
 	struct pci_dev *pdev;
 	spinlock_t lock;
@@ -603,9 +548,8 @@ struct adm8211_priv {
 	unsigned int cur_tx, dirty_tx, cur_rx;
 
 	struct ieee80211_low_level_stats stats;
-	struct ieee80211_hw_mode modes[1];
-	struct ieee80211_channel channels[ARRAY_SIZE(adm8211_channels)];
-	struct ieee80211_rate rates[ARRAY_SIZE(adm8211_rates)];
+	struct ieee80211_supported_band band;
+	struct ieee80211_channel channels[14];
 	int mode;
 
 	int channel;
@@ -643,6 +587,11 @@ struct adm8211_priv {
 	} transceiver_type;
 };
 
+struct ieee80211_chan_range {
+	u8 min;
+	u8 max;
+};
+
 static const struct ieee80211_chan_range cranges[] = {
 	{1,  11},	/* FCC */
 	{1,  11},	/* IC */
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index f13346ba9dd..3e40323cd43 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -468,10 +468,6 @@ struct b43_phy {
 	u8 possible_phymodes;
 	/* GMODE bit enabled? */
 	bool gmode;
-	/* Possible ieee80211 subsystem hwmodes for this PHY.
-	 * Which mode is selected, depends on thr GMODE enabled bit */
-#define B43_MAX_PHYHWMODES	2
-	struct ieee80211_hw_mode hwmodes[B43_MAX_PHYHWMODES];
 
 	/* Analog Type */
 	u8 analog;
@@ -727,7 +723,6 @@ struct b43_wldev {
 
 	bool bad_frames_preempt;	/* Use "Bad Frames Preemption" (default off) */
 	bool dfq_valid;		/* Directed frame queue valid (IBSS PS mode, ATIM) */
-	bool short_preamble;	/* TRUE, if short preamble is enabled. */
 	bool short_slot;	/* TRUE, if short slot timing is enabled. */
 	bool radio_hw_enable;	/* saved state of radio hardware enabled state */
 	bool suspend_in_progress;	/* TRUE, if we are in a suspend/resume cycle */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 51dfce16178..017a041d07d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -96,25 +96,29 @@ MODULE_DEVICE_TABLE(ssb, b43_ssb_tbl);
  * data in there. This data is the same for all devices, so we don't
  * get concurrency issues */
 #define RATETAB_ENT(_rateid, _flags) \
-	{							\
-		.rate	= B43_RATE_TO_BASE100KBPS(_rateid),	\
-		.val	= (_rateid),				\
-		.val2	= (_rateid),				\
-		.flags	= (_flags),				\
+	{								\
+		.bitrate	= B43_RATE_TO_BASE100KBPS(_rateid),	\
+		.hw_value	= (_rateid),				\
+		.flags		= (_flags),				\
 	}
+
+/*
+ * NOTE: When changing this, sync with xmit.c's
+ *	 b43_plcp_get_bitrate_idx_* functions!
+ */
 static struct ieee80211_rate __b43_ratetable[] = {
-	RATETAB_ENT(B43_CCK_RATE_1MB, IEEE80211_RATE_CCK),
-	RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_CCK_2),
-	RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_CCK_2),
-	RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_CCK_2),
-	RATETAB_ENT(B43_OFDM_RATE_6MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_9MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_12MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_18MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_24MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_36MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_48MB, IEEE80211_RATE_OFDM),
-	RATETAB_ENT(B43_OFDM_RATE_54MB, IEEE80211_RATE_OFDM),
+	RATETAB_ENT(B43_CCK_RATE_1MB, 0),
+	RATETAB_ENT(B43_CCK_RATE_2MB, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATETAB_ENT(B43_CCK_RATE_5MB, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATETAB_ENT(B43_CCK_RATE_11MB, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATETAB_ENT(B43_OFDM_RATE_6MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_9MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_12MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_18MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_24MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_36MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_48MB, 0),
+	RATETAB_ENT(B43_OFDM_RATE_54MB, 0),
 };
 
 #define b43_a_ratetable		(__b43_ratetable + 4)
@@ -126,14 +130,8 @@ static struct ieee80211_rate __b43_ratetable[] = {
 
 #define CHANTAB_ENT(_chanid, _freq) \
 	{							\
-		.chan	= (_chanid),				\
-		.freq	= (_freq),				\
-		.val	= (_chanid),				\
-		.flag	= IEEE80211_CHAN_W_SCAN |		\
-			  IEEE80211_CHAN_W_ACTIVE_SCAN |	\
-			  IEEE80211_CHAN_W_IBSS,		\
-		.power_level	= 0xFF,				\
-		.antenna_max	= 0xFF,				\
+		.center_freq	= (_freq),			\
+		.hw_value	= (_chanid),			\
 	}
 static struct ieee80211_channel b43_2ghz_chantable[] = {
 	CHANTAB_ENT(1, 2412),
@@ -151,9 +149,8 @@ static struct ieee80211_channel b43_2ghz_chantable[] = {
 	CHANTAB_ENT(13, 2472),
 	CHANTAB_ENT(14, 2484),
 };
-#define b43_2ghz_chantable_size	ARRAY_SIZE(b43_2ghz_chantable)
 
-#if 0
+#ifdef NOTYET
 static struct ieee80211_channel b43_5ghz_chantable[] = {
 	CHANTAB_ENT(36, 5180),
 	CHANTAB_ENT(40, 5200),
@@ -169,9 +166,22 @@ static struct ieee80211_channel b43_5ghz_chantable[] = {
 	CHANTAB_ENT(161, 5805),
 	CHANTAB_ENT(165, 5825),
 };
-#define b43_5ghz_chantable_size	ARRAY_SIZE(b43_5ghz_chantable)
+
+static struct ieee80211_supported_band b43_band_5GHz = {
+	.channels = b43_5ghz_chantable,
+	.n_channels = ARRAY_SIZE(b43_5ghz_chantable),
+	.bitrates = b43_a_ratetable,
+	.n_bitrates = b43_a_ratetable_size,
+};
 #endif
 
+static struct ieee80211_supported_band b43_band_2GHz = {
+	.channels = b43_2ghz_chantable,
+	.n_channels = ARRAY_SIZE(b43_2ghz_chantable),
+	.bitrates = b43_g_ratetable,
+	.n_bitrates = b43_g_ratetable_size,
+};
+
 static void b43_wireless_core_exit(struct b43_wldev *dev);
 static int b43_wireless_core_init(struct b43_wldev *dev);
 static void b43_wireless_core_stop(struct b43_wldev *dev);
@@ -1222,17 +1232,18 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
 }
 
 static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
-				      u16 shm_offset, u16 size, u8 rate)
+				      u16 shm_offset, u16 size,
+				      struct ieee80211_rate *rate)
 {
 	struct b43_plcp_hdr4 plcp;
 	u32 tmp;
 	__le16 dur;
 
 	plcp.data = 0;
-	b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
+	b43_generate_plcp_hdr(&plcp, size + FCS_LEN, rate->hw_value);
 	dur = ieee80211_generic_frame_duration(dev->wl->hw,
 					       dev->wl->vif, size,
-					       B43_RATE_TO_BASE100KBPS(rate));
+					       rate);
 	/* Write PLCP in two parts and timing for packet transfer */
 	tmp = le32_to_cpu(plcp.data);
 	b43_shm_write16(dev, B43_SHM_SHARED, shm_offset, tmp & 0xFFFF);
@@ -1247,7 +1258,8 @@ static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
  * 3) Stripping TIM
  */
 static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
-					  u16 *dest_size, u8 rate)
+					  u16 *dest_size,
+					  struct ieee80211_rate *rate)
 {
 	const u8 *src_data;
 	u8 *dest_data;
@@ -1292,7 +1304,7 @@ static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
 					 IEEE80211_STYPE_PROBE_RESP);
 	dur = ieee80211_generic_frame_duration(dev->wl->hw,
 					       dev->wl->vif, *dest_size,
-					       B43_RATE_TO_BASE100KBPS(rate));
+					       rate);
 	hdr->duration_id = dur;
 
 	return dest_data;
@@ -1300,7 +1312,8 @@ static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
 
 static void b43_write_probe_resp_template(struct b43_wldev *dev,
 					  u16 ram_offset,
-					  u16 shm_size_offset, u8 rate)
+					  u16 shm_size_offset,
+					  struct ieee80211_rate *rate)
 {
 	const u8 *probe_resp_data;
 	u16 size;
@@ -1313,14 +1326,15 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev,
 	/* Looks like PLCP headers plus packet timings are stored for
 	 * all possible basic rates
 	 */
-	b43_write_probe_resp_plcp(dev, 0x31A, size, B43_CCK_RATE_1MB);
-	b43_write_probe_resp_plcp(dev, 0x32C, size, B43_CCK_RATE_2MB);
-	b43_write_probe_resp_plcp(dev, 0x33E, size, B43_CCK_RATE_5MB);
-	b43_write_probe_resp_plcp(dev, 0x350, size, B43_CCK_RATE_11MB);
+	b43_write_probe_resp_plcp(dev, 0x31A, size, &b43_b_ratetable[0]);
+	b43_write_probe_resp_plcp(dev, 0x32C, size, &b43_b_ratetable[1]);
+	b43_write_probe_resp_plcp(dev, 0x33E, size, &b43_b_ratetable[2]);
+	b43_write_probe_resp_plcp(dev, 0x350, size, &b43_b_ratetable[3]);
 
 	size = min((size_t) size, 0x200 - sizeof(struct b43_plcp_hdr6));
 	b43_write_template_common(dev, probe_resp_data,
-				  size, ram_offset, shm_size_offset, rate);
+				  size, ram_offset, shm_size_offset,
+				  rate->hw_value);
 	kfree(probe_resp_data);
 }
 
@@ -1388,7 +1402,7 @@ static void handle_irq_beacon(struct b43_wldev *dev)
 			b43_write_beacon_template(dev, 0x68, 0x18,
 						  B43_CCK_RATE_1MB);
 			b43_write_probe_resp_template(dev, 0x268, 0x4A,
-						      B43_CCK_RATE_11MB);
+						      &__b43_ratetable[3]);
 			wl->beacon0_uploaded = 1;
 		}
 		cmd |= B43_MACCMD_BEACON0_VALID;
@@ -2830,14 +2844,11 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 	mutex_lock(&wl->mutex);
 
 	/* Switch the PHY mode (if necessary). */
-	switch (conf->phymode) {
-	case MODE_IEEE80211A:
+	switch (conf->channel->band) {
+	case IEEE80211_BAND_5GHZ:
 		new_phymode = B43_PHYMODE_A;
 		break;
-	case MODE_IEEE80211B:
-		new_phymode = B43_PHYMODE_B;
-		break;
-	case MODE_IEEE80211G:
+	case IEEE80211_BAND_2GHZ:
 		new_phymode = B43_PHYMODE_G;
 		break;
 	default:
@@ -2863,8 +2874,8 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 
 	/* Switch to the requested channel.
 	 * The firmware takes care of races with the TX handler. */
-	if (conf->channel_val != phy->channel)
-		b43_radio_selectchannel(dev, conf->channel_val, 0);
+	if (conf->channel->hw_value != phy->channel)
+		b43_radio_selectchannel(dev, conf->channel->hw_value, 0);
 
 	/* Enable/Disable ShortSlot timing. */
 	if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) !=
@@ -3810,9 +3821,7 @@ static int b43_setup_modes(struct b43_wldev *dev,
 			   bool have_2ghz_phy, bool have_5ghz_phy)
 {
 	struct ieee80211_hw *hw = dev->wl->hw;
-	struct ieee80211_hw_mode *mode;
 	struct b43_phy *phy = &dev->phy;
-	int err;
 
 	/* XXX: This function will go away soon, when mac80211
 	 *      band stuff is rewritten. So this is just a hack.
@@ -3821,15 +3830,7 @@ static int b43_setup_modes(struct b43_wldev *dev,
 	 *      This assumption is OK, as any B, N or A PHY will already
 	 *      have died a horrible sanity check death earlier. */
 
-	mode = &phy->hwmodes[0];
-	mode->mode = MODE_IEEE80211G;
-	mode->num_channels = b43_2ghz_chantable_size;
-	mode->channels =