staging: remove ath6kl

ath6kl is now in drivers/net/wireless/ath so the staging driver
is not supported anymore and should be removed.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

111 files changed, 0 insertions, 50006 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 06c9081d596..d497a93748a 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -126,8 +126,6 @@ source "drivers/staging/quickstart/Kconfig"
 
 source "drivers/staging/sbe-2t3e3/Kconfig"
 
-source "drivers/staging/ath6kl/Kconfig"
-
 source "drivers/staging/keucr/Kconfig"
 
 source "drivers/staging/bcm/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index f3c5e33bb26..fe6c6114a66 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_SOLO6X10)		+= solo6x10/
 obj-$(CONFIG_TIDSPBRIDGE)	+= tidspbridge/
 obj-$(CONFIG_ACPI_QUICKSTART)	+= quickstart/
 obj-$(CONFIG_SBE_2T3E3)		+= sbe-2t3e3/
-obj-$(CONFIG_ATH6K_LEGACY)	+= ath6kl/
 obj-$(CONFIG_USB_ENESTORAGE)	+= keucr/
 obj-$(CONFIG_BCM_WIMAX)		+= bcm/
 obj-$(CONFIG_FT1000)		+= ft1000/
diff --git a/drivers/staging/ath6kl/Kconfig b/drivers/staging/ath6kl/Kconfig
deleted file mode 100644
index afd6cc16a2b..00000000000
--- a/drivers/staging/ath6kl/Kconfig
+++ /dev/null
@@ -1,158 +0,0 @@
-config ATH6K_LEGACY
-	tristate "Atheros AR6003 support (non mac80211)"
-        depends on MMC && WLAN
-	depends on CFG80211
-        select WIRELESS_EXT
-        select WEXT_PRIV
-	help
-	This module adds support for wireless adapters based on Atheros AR6003 chipset running over SDIO. If you choose to build it as a module, it will be called ath6kl. Pls note that AR6002 and AR6001 are not supported by this driver.
-
-choice
-	prompt "AR6003 Board Data Configuration"
-	depends on ATH6K_LEGACY
-	default AR600x_SD31_XXX
-	help
-	Select the appropriate board data template from the list below that matches your AR6003 based reference design.
-
-config AR600x_SD31_XXX
-	bool "SD31-xxx"
-	help
-        Board Data file for a standard SD31 reference design (File: bdata.SD31.bin)
-
-config AR600x_WB31_XXX
-	bool "WB31-xxx"
-	help
-        Board Data file for a standard WB31 (BT/WiFi) reference design (File: bdata.WB31.bin)
-
-config AR600x_SD32_XXX
-	bool "SD32-xxx"
-	help
-        Board Data file for a standard SD32 (5GHz) reference design (File: bdata.SD32.bin)
-
-config AR600x_CUSTOM_XXX
-	bool "CUSTOM-xxx"
-	help
-        Board Data file for a custom reference design (File: should be named as bdata.CUSTOM.bin)
-endchoice
-
-config ATH6KL_ENABLE_COEXISTENCE
-	bool "BT Coexistence support"
-	depends on ATH6K_LEGACY
-	help
-	Enables WLAN/BT coexistence support. Select the apprpriate configuration from below.
-
-choice
-	prompt "Front-End Antenna Configuration"
-	depends on ATH6KL_ENABLE_COEXISTENCE
-	default AR600x_DUAL_ANTENNA
-	help
-	Indicates the number of antennas being used by BT and WLAN. Select the appropriate configuration from the list below that matches your AR6003 based reference design.
-
-config AR600x_DUAL_ANTENNA
-	bool "Dual Antenna"
-	help
-        Dual Antenna Design
-
-config AR600x_SINGLE_ANTENNA
-	bool "Single Antenna"
-	help
-        Single Antenna Design
-endchoice
-
-choice
-	prompt "Collocated Bluetooth Type"
-	depends on ATH6KL_ENABLE_COEXISTENCE
-	default AR600x_BT_AR3001
-	help
-	Select the appropriate configuration from the list below that matches your AR6003 based reference design.
-
-config AR600x_BT_QCOM
-	bool "Qualcomm BTS4020X"
-	help
-        Qualcomm BT (3 Wire PTA)
-
-config AR600x_BT_CSR
-	bool "CSR BC06"
-	help
-        CSR BT (3 Wire PTA)
-
-config AR600x_BT_AR3001
-	bool "Atheros AR3001"
-	help
-        Atheros BT (3 Wire PTA)
-endchoice
-
-config ATH6KL_HCI_BRIDGE
-	bool "HCI over SDIO support"
-	depends on ATH6K_LEGACY
-	help
-	Enables BT over SDIO. Applicable only for combo designs (eg: WB31)
-
-config ATH6KL_CONFIG_GPIO_BT_RESET
-	bool "Configure BT Reset GPIO"
-	depends on ATH6KL_HCI_BRIDGE
-	help
-	Configure a WLAN GPIO for use with BT.
-
-config AR600x_BT_RESET_PIN
-	int "GPIO"
-	depends on ATH6KL_CONFIG_GPIO_BT_RESET
-	default 22
-	help
-	WLAN GPIO to be used for resetting BT
-
-config ATH6KL_HTC_RAW_INTERFACE
-	bool "RAW HTC support"
-	depends on ATH6K_LEGACY
-	help
-	Enables raw HTC interface. Allows application to directly talk to the HTC interface via the ioctl interface
-
-config ATH6KL_VIRTUAL_SCATTER_GATHER
-	bool "Virtual Scatter-Gather support"
-	depends on ATH6K_LEGACY
-	help
-	Enables virtual scatter gather support for the hardw