Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers for DA9052/53 PMIC as well as HIH-6130/HIH-6131 humidity
  and temperature sensors.

  Convert drivers to use devm_ functions and to use dev_pm_ops.  Address
  a couple of Coverity errors/warnings as well as compile warnings.
  Some functional improvements in applesmc driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (72 commits)
  hwmon: (applesmc) Ignore some temperature registers
  hwmon: (applesmc) Allow negative temperature values
  hwmon: (s3c-hwmon) Use devm_kzalloc instead of kzalloc
  hwmon: (w83781d) Fix compile warning
  hwmon: (applesmc) Shorten minimum wait time
  hwmon: (exynos4_tmu) Use struct dev_pm_ops for power management
  hwmon: (gpio-fan) Use struct dev_pm_ops for power management
  hwmon: (abituguru3) Use struct dev_pm_ops for power management
  hwmon: (abituguru) Use struct dev_pm_ops for power management
  hwmon: (acpi_power_meter) Fix unintentional integer overflow
  hwmon: (acpi_power_meter) Cleanup and optimizations
  hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver
  hwmon: (applesmc) Skip sensor mapping
  hwmon: (ntc_thermistor) Ensure that data->name string is terminated
  hwmon: (w83l785ts) Convert to use devm_ functions
  hwmon: (w83l785ts) Simplify code and improve readability
  hwmon: (smsc47m192) Convert to use devm_ functions
  hwmon: (smsc47m1) Convert to use devm_ functions
  hwmon: (smsc47b397) Convert to use devm_ functions
  hwmon: (k8temp) Convert to use devm_ functions
  ...

68 files changed, 1220 insertions, 846 deletions

diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052
new file mode 100644
index 00000000000..ef898553638
--- /dev/null
+++ b/Documentation/hwmon/da9052
@@ -0,0 +1,61 @@
+Supported chips:
+  * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs
+    Prefix: 'da9052'
+    Datasheet: Datasheet is not publicly available.
+
+Authors: David Dajun Chen <dchen@diasemi.com>
+
+Description
+-----------
+
+The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 10
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+Channel 0: VDDOUT - measurement of the system voltage
+Channel 1: ICH - internal battery charger current measurement
+Channel 2: TBAT - output from the battery NTC
+Channel 3: VBAT - measurement of the battery voltage
+Channel 4: ADC_IN4 - high impedance input (0 - 2.5V)
+Channel 5: ADC_IN5 - high impedance input (0 - 2.5V)
+Channel 6: ADC_IN6 - high impedance input (0 - 2.5V)
+Channel 7: XY - TSI interface to measure the X and Y voltage of the touch
+	   screen resistive potentiometers
+Channel 8: Internal Tjunc. - sense (internal temp. sensor)
+Channel 9: VBBAT - measurement of the backup battery voltage
+
+By using sysfs attributes we can measure the system voltage VDDOUT, the battery
+charging current ICH, battery temperature TBAT, battery junction temperature
+TJUNC, battery voltage VBAT and the back up battery voltage VBBAT.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 10 bit ADC.
+
+The battery voltage is calculated as:
+	Milli volt = ((ADC value * 1000) / 512) + 2500
+
+The backup battery voltage is calculated as:
+	Milli volt = (ADC value * 2500) / 512;
+
+The voltages on ADC channels 4, 5 and 6 are calculated as:
+	Milli volt = (ADC value * 2500) / 1023
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC.  Junction and battery temperatures
+are monitored by the ADC channels.
+
+The junction temperature is calculated:
+	Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8
+The junction temperature attribute is supported by the driver.
+
+The battery temperature is calculated:
+	Degree Celcius = 1 / (t1 + 1/298)- 273
+where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
+Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.
diff --git a/Documentation/hwmon/hih6130 b/Documentation/hwmon/hih6130
new file mode 100644
index 00000000000..73dae918ea7
--- /dev/null
+++ b/Documentation/hwmon/hih6130
@@ -0,0 +1,37 @@
+Kernel driver hih6130
+=====================
+
+Supported chips:
+  * Honeywell HIH-6130 / HIH-6131
+    Prefix: 'hih6130'
+    Addresses scanned: none
+    Datasheet: Publicly available at the Honeywell website
+    http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872
+
+Author:
+  Iain Paton <ipaton0@gmail.com>
+
+Description
+-----------
+
+The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package.
+The difference between the two devices is that the HIH-6131 has a condensation
+filter.
+
+The devices communicate with the I2C protocol. All sensors are set to the same
+I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27)
+can be used in the board setup code.
+
+Please see Documentation/i2c/instantiating-devices for details on how to
+instantiate I2C devices.
+
+sysfs-Interface
+---------------
+
+temp1_input - temperature input
+humidity1_input - humidity input
+
+Notes
+-----
+
+Command mode and alarms are not currently supported.
diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches
index 86f42e8e9e4..790f774a303 100644
--- a/Documentation/hwmon/submitting-patches
+++ b/Documentation/hwmon/submitting-patches
@@ -70,6 +70,9 @@ increase the chances of your change being accepted.
   review more difficult. It may also result in code which is more complicated
   than necessary. Use inline functions or just regular functions instead.
 
+* Use devres functions whenever possible to allocate resources. For rationale
+  and supported functions, please see Documentation/driver-model/devres.txt.
+
 * If the driver has a detect function, make sure it is silent. Debug messages
   and messages printed after a successful detection are acceptable, but it
   must not print messages such as "Chip XXX not found/supported".
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6f1d167cb1e..b0a2e4c37e1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -314,6 +314,16 @@ config SENSORS_DS1621
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1621.
 
+config SENSORS_DA9052_ADC
+	tristate "Dialog DA9052/DA9053 ADC"
+	depends on PMIC_DA9052
+	help
+	  Say y here to support the ADC found on Dialog Semiconductor
+	  DA9052-BC and DA9053-AA/Bx PMICs.
+
+	  This driver can also be built as module. If so, the module
+	  will be called da9052-hwmon.
+
 config SENSORS_EXYNOS4_TMU
 	tristate "Temperature sensor on Samsung EXYNOS4"
 	depends on ARCH_EXYNOS4
@@ -433,6 +443,16 @@ config SENSORS_GPIO_FAN
 	  This driver can also be built as a module.  If so, the module
 	  will be called gpio-fan.
 
+config SENSORS_HIH6130
+	tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Honeywell Humidicon
+	  HIH-6130 and HIH-6131 Humidicon humidity sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called hih6130.
+
 config SENSORS_CORETEMP
 	tristate "Intel Core/Core2/Atom temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index e1eeac13b85..7aa98119c4a 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
+obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
@@ -58,6 +59,7 @@ obj-$(CONFIG_SENSORS_G760A)	+= g760a.o
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
 obj-$(CONFIG_SENSORS_GPIO_FAN)	+= gpio-fan.o
+obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130.o
 obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o
 obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
 obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index a72bf25601a..d4419b47f3d 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -1513,10 +1513,10 @@ LEAVE_UPDATE:
 		return NULL;
 }
 
-#ifdef CONFIG_PM
-static int abituguru_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int abituguru_suspend(struct device *dev)
 {
-	struct abituguru_data *data = platform_get_drvdata(pdev);
+	struct abituguru_data *data = dev_get_drvdata(dev);
 	/*
 	 * make sure all communications with the uguru are done and no new
 	 * ones are started
@@ -1525,29 +1525,30 @@ static int abituguru_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int abituguru_resume(struct platform_device *pdev)
+static int abituguru_resume(struct device *dev)
 {
-	struct abituguru_data *data = platform_get_drvdata(pdev);
+	struct abituguru_data *data = dev_get_drvdata(dev);
 	/* See if the uGuru is still ready */
 	if (inb_p(data->addr + ABIT_UGURU_DATA) != ABIT_UGURU_STATUS_INPUT)
 		data->uguru_ready = 0;
 	mutex_unlock(&data->update_lock);
 	return 0;
 }
+
+static SIMPLE_DEV_PM_OPS(abituguru_pm, abituguru_suspend, abituguru_resume);
+#define ABIT_UGURU_PM	&abituguru_pm
 #else
-#define abituguru_suspend	NULL
-#define abituguru_resume	NULL
+#define ABIT_UGURU_PM	NULL
 #endif /* CONFIG_PM */
 
 static struct platform_driver abituguru_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
 		.name	= ABIT_UGURU_NAME,
+		.pm	= ABIT_UGURU_PM,
 	},
 	.probe		= abituguru_probe,
 	.remove		= __devexit_p(abituguru_remove),
-	.suspend	= abituguru_suspend,
-	.resume		= abituguru_resume,
 };
 
 static int __init abituguru_detect(void)
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index a5bc4287daa..5d582aebff8 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -1141,10 +1141,10 @@ LEAVE_UPDATE:
 		return NULL;
 }
 
-#ifdef CONFIG_PM
-static int abituguru3_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int abituguru3_suspend(struct device *dev)
 {
-	struct abituguru3_data *data = platform_get_drvdata(pdev);
+	struct abituguru3_data *data = dev_get_drvdata(dev);
 	/*
 	 * make sure all communications with the uguru3 are done and no new
 	 * ones are started
@@ -1153,26 +1153,27 @@ static int abituguru3_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int abituguru3_resume(struct platform_device *pdev)
+static int abituguru3_resume(struct device *dev)
 {
-	struct abituguru3_data *data = platform_get_drvdata(pdev);
+	struct abituguru3_data *data = dev_get_drvdata(dev);
 	mutex_unlock(&data->update_lock);
 	return 0;
 }
+
+static SIMPLE_DEV_PM_OPS(abituguru3_pm, abituguru3_suspend, abituguru3_resume);
+#define ABIT_UGURU3_PM	&abituguru3_pm
 #else
-#define abituguru3_suspend	NULL
-#define abituguru3_resume	NULL
+#define ABIT_UGURU3_PM	NULL
 #endif /* CONFIG_PM */
 
 static struct platform_driver abituguru3_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
 		.name	= ABIT_UGURU3_NAME,
+		.pm	= ABIT_UGURU3_PM
 	},
 	.probe	= abituguru3_probe,
 	.remove	= __devexit_p(abituguru3_remove),
-	.suspend = abituguru3_suspend,
-	.resume = abituguru3_resume
 };
 
 static int __init abituguru3_dmi_detect(void)
diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index e3fcf814683..563c02904dd 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -101,7 +101,7 @@ struct acpi_power_meter_resource {
 	unsigned long		sensors_last_updated;
 	struct sensor_device_attribute	sensors[NUM_SENSORS];
 	int			num_sensors;
-	int			trip[2];
+	s64			trip[2];
 	int			num_domain_devices;
 	struct acpi_device	**domain_devices;
 	struct kobject		*holders_dir;
@@ -237,7 +237,7 @@ static ssize_t set_cap(struct device *dev, struct device_attribute *devattr,
 	if (res)
 		return res;
 
-	temp /= 1000;
+	temp = DIV_ROUND_CLOSEST(temp, 1000);
 	if (temp > resource->caps.max_cap || temp < resource->caps.min_cap)
 		return -EINVAL;
 	arg0.integer.value = temp;
@@ -307,9 +307,7 @@ static ssize_t set_trip(struct device *dev, struct device_attribute *devattr,
 	if (res)
 		return res;
 
-	temp /= 1000;
-	if (temp < 0)
-		return -EINVAL;
+	temp = DIV_ROUND_CLOSEST(temp, 1000);
 
 	mutex_lock(&resource->lock);
 	resource->trip[attr->index - 7] = temp;
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 4394e7e99c4..fd1d1b15854 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -366,11 +366,11 @@ static int adm1021_probe(struct i2c_client *client,
 	struct adm1021_data *data;
 	int err;
 
-	data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL);
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1021_data),
+			    GFP_KERNEL);
 	if (!data) {
-		pr_debug("adm1021: detect failed, kzalloc failed!\n");
-		err = -ENOMEM;
-		goto error0;
+		pr_debug("adm1021: detect failed, devm_kzalloc failed!\n");
+		return -ENOMEM;
 	}
 
 	i2c_set_clientdata(client, data);
@@ -384,21 +384,18 @@ static int adm1021_probe(struct i2c_client *client,
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &adm1021_group);
 	if (err)
-		goto error1;
+		return err;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
-		goto error3;
+		goto error;
 	}
 
 	return 0;
 
-error3:
+error:
 	sysfs_remove_group(&client->dev.kobj, &adm1021_group);
-error1:
-	kfree(data);
-error0:
 	return err;
 }
 
@@ -418,7 +415,6 @@ static int adm1021_remove(struct i2c_client *client)
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &adm1021_group);
 
-	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index b8557f9857d..7e16e5d07bc 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -477,11 +477,10 @@ static int adm1025_probe(struct i2c_client *client,
 	int err;
 	u8 config;
 
-	data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1025_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
@@ -492,7 +491,7 @@ static int adm1025_probe(struct i2c_client *client,
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &adm1025_group);
 	if (err)
-		goto exit_free;
+		return err;
 
 	/* Pin 11 is either in4 (+12V) or VID4 */
 	config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
@@ -513,9 +512,6 @@ static int adm1025_probe(struct i2c_client *client,
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
-exit_free:
-	kfree(data);
-exit:
 	return err;
 }
 
@@ -569,7 +565,6 @@ static int adm1025_remove(struct i2c_client *client)
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group);
 	sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
 
-	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 1003219b9f9..0f068e7297e 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -1834,11 +1834,10 @@ static int adm1026_probe(struct i2c_client *client,
 	struct adm1026_data *data;
 	int err;
 
-	data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1026_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);
@@ -1852,7 +1851,7 @@ static int adm1026_probe(struct i2c_client *client,
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &adm1026_group);
 	if (err)
-		goto exitfree;
+		return err;
 	if (data->config1 & CFG1_AIN8_9)
 		err = sysfs_create_group(&client->dev.kobj,
 					 &adm1026_group_in8_9);
@@ -1877,9 +1876,6 @@ exitremove:
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9);
 	else
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3);
-exitfree:
-	kfree(data);
-exit:
 	return err;
 }
 
@@ -1892,7 +1888,6 @@ static int adm1026_remove(struct i2c_client *client)
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9);
 	else
 		sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3);
-	kfree(data);
 	return 0;
 }
 
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 44e1fd7f3d8..c6a4631e833 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -954,11 +954,10 @@ static int adm1031_probe(struct i2c_client *client,
 	struct adm1031_data *data;
 	int err;
 
-	data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1031_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
 	i2c_set_clientdata(client, data);
 	data->chip_type = id->driver_data;
@@ -975,7 +974,7 @@ static int adm1031_probe(struct i2c_client *client,
 	/* Register sysfs hooks */
 	err = sysfs_create_group(&client->dev.kobj, &adm1031_group);
 	if (err)
-		goto exit_free;
+		return err;
 
 	if (data->chip_type == adm1031) {
 		err = sysfs_create_group(&client->dev.kobj, &adm1031_group_opt);
@@ -994,9 +993,6 @@ static int adm1031_probe(struct i2c_client *client,
 exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &adm1031_group);
 	sysfs_