Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  spi / PM: Support dev_pm_ops
  PM: Prototype the pm_generic_ operations
  PM / Runtime: Generic resume shouldn't set RPM_ACTIVE unconditionally
  PM: Use dev_name() in core device suspend and resume routines
  PM: Permit registration of parentless devices during system suspend
  PM: Replace the device power.status field with a bit field
  PM: Remove redundant checks from core device resume routines
  PM: Use a different list of devices for each stage of device suspend
  PM: Avoid compiler warning in pm_noirq_op()
  PM: Use pm_wakeup_pending() in __device_suspend()
  PM / Wakeup: Replace pm_check_wakeup_events() with pm_wakeup_pending()
  PM: Prevent dpm_prepare() from returning errors unnecessarily
  PM: Fix references to basic-pm-debugging.txt in drivers-testing.txt
  PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)
  PM / Hibernate: When failed, in_suspend should be reset
  PM / Hibernate: hibernation_ops->leave should be checked too
  Freezer: Fix a race during freezing of TASK_STOPPED tasks
  PM: Use proper ccflag flag in kernel/power/Makefile
  PM / Runtime: Fix comments to match runtime callback code

17 files changed, 282 insertions, 206 deletions

diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.txt
index 7f7a737f7f9..638afdf4d6b 100644
--- a/Documentation/power/drivers-testing.txt
+++ b/Documentation/power/drivers-testing.txt
@@ -23,10 +23,10 @@ Once you have resolved the suspend/resume-related problems with your test system
 without the new driver, you are ready to test it:
 
 a) Build the driver as a module, load it and try the test modes of hibernation
-   (see: Documents/power/basic-pm-debugging.txt, 1).
+   (see: Documentation/power/basic-pm-debugging.txt, 1).
 
 b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and
-   "platform" modes (see: Documents/power/basic-pm-debugging.txt, 1).
+   "platform" modes (see: Documentation/power/basic-pm-debugging.txt, 1).
 
 c) Compile the driver directly into the kernel and try the test modes of
    hibernation.
@@ -34,12 +34,12 @@ c) Compile the driver directly into the kernel and try the test modes of
 d) Attempt to hibernate with the driver compiled directly into the kernel
    in the "reboot", "shutdown" and "platform" modes.
 
-e) Try the test modes of suspend (see: Documents/power/basic-pm-debugging.txt,
+e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.txt,
    2).  [As far as the STR tests are concerned, it should not matter whether or
    not the driver is built as a module.]
 
 f) Attempt to suspend to RAM using the s2ram tool with the driver loaded
-   (see: Documents/power/basic-pm-debugging.txt, 2).
+   (see: Documentation/power/basic-pm-debugging.txt, 2).
 
 Each of the above tests should be repeated several times and the STD tests
 should be mixed with the STR tests.  If any of them fails, the driver cannot be
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 41cc7b30d7d..ffe55ffa540 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -50,6 +50,15 @@ type's callbacks are not defined) of given device.  The bus type, device type
 and device class callbacks are referred to as subsystem-level callbacks in what
 follows.
 
+By default, the callbacks are always invoked in process context with interrupts
+enabled.  However, subsystems can use the pm_runtime_irq_safe() helper function
+to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
+callbacks should be invoked in atomic context with interrupts disabled
+(->runtime_idle() is still invoked the default way).  This implies that these
+callback routines must not block or sleep, but it also means that the
+synchronous helper functions listed at the end of Section 4 can be used within
+an interrupt handler or in an atomic context.
+
 The subsystem-level suspend callback is _entirely_ _responsible_ for handling
 the suspend of the device as appropriate, which may, but need not include
 executing the device driver's own ->runtime_suspend() callback (from the
@@ -237,6 +246,10 @@ defined in include/linux/pm.h:
       Section 8); it may be modified only by the pm_runtime_no_callbacks()
       helper function
 
+  unsigned int irq_safe;
+    - indicates that the ->runtime_suspend() and ->runtime_resume() callbacks
+      will be invoked with the spinlock held and interrupts disabled
+
   unsigned int use_autosuspend;
     - indicates that the device's driver supports delayed autosuspend (see
       Section 9); it may be modified only by the
@@ -344,6 +357,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
     - decrement the device's usage counter; if the result is 0 then run
       pm_runtime_idle(dev) and return its result
 
+  int pm_runtime_put_sync_suspend(struct device *dev);
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_runtime_suspend(dev) and return its result
+
   int pm_runtime_put_sync_autosuspend(struct device *dev);
     - decrement the device's usage counter; if the result is 0 then run
       pm_runtime_autosuspend(dev) and return its result
@@ -397,6 +414,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       PM attributes from /sys/devices/.../power (or prevent them from being
       added when the device is registered)
 
+  void pm_runtime_irq_safe(struct device *dev);
+    - set the power.irq_safe flag for the device, causing the runtime-PM
+      suspend and resume callbacks (but not the idle callback) to be invoked
+      with interrupts disabled
+
   void pm_runtime_mark_last_busy(struct device *dev);
     - set the power.last_busy field to the current time
 
@@ -438,6 +460,15 @@ pm_runtime_suspended()
 pm_runtime_mark_last_busy()
 pm_runtime_autosuspend_expiration()
 
+If pm_runtime_irq_safe() has been called for a device then the following helper
+functions may also be used in interrupt context:
+
+pm_runtime_suspend()
+pm_runtime_autosuspend()
+pm_runtime_resume()
+pm_runtime_get_sync()
+pm_runtime_put_sync_suspend()
+
 5. Run-time PM Initialization, Device Probing and Removal
 
 Initially, the run-time PM is disabled for all devices, which means that the
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index 81f2c84697f..42f97f92562 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -39,7 +39,7 @@ EXPORT_SYMBOL_GPL(pm_generic_runtime_idle);
  *
  * If PM operations are defined for the @dev's driver and they include
  * ->runtime_suspend(), execute it and return its error code.  Otherwise,
- * return -EINVAL.
+ * return 0.
  */
 int pm_generic_runtime_suspend(struct device *dev)
 {
@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(pm_generic_runtime_suspend);
  *
  * If PM operations are defined for the @dev's driver and they include
  * ->runtime_resume(), execute it and return its error code.  Otherwise,
- * return -EINVAL.
+ * return 0.
  */
 int pm_generic_runtime_resume(struct device *dev)
 {
@@ -185,7 +185,7 @@ static int __pm_generic_resume(struct device *dev, int event)
 		return 0;
 
 	ret = callback(dev);
-	if (!ret) {
+	if (!ret && pm_runtime_enabled(dev)) {
 		pm_runtime_disable(dev);
 		pm_runtime_set_active(dev);
 		pm_runtime_enable(dev);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index ead3e79d6fc..2a52270aeb3 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/async.h>
+#include <linux/suspend.h>
 
 #include "../base.h"
 #include "power.h"
@@ -41,16 +42,13 @@
  */
 
 LIST_HEAD(dpm_list);
+LIST_HEAD(dpm_prepared_list);
+LIST_HEAD(dpm_suspended_list);
+LIST_HEAD(dpm_noirq_list);
 
 static DEFINE_MUTEX(dpm_list_mtx);
 static pm_message_t pm_transition;
 
-/*
- * Set once the preparation of devices for a PM transition has started, reset
- * before starting to resume devices.  Protected by dpm_list_mtx.
- */
-static bool transition_started;
-
 static int async_error;
 
 /**
@@ -59,7 +57,7 @@ static int async_error;
  */
 void device_pm_init(struct device *dev)
 {
-	dev->power.status = DPM_ON;
+	dev->power.in_suspend = false;
 	init_completion(&dev->power.completion);
 	complete_all(&dev->power.completion);
 	dev->power.wakeup = NULL;
@@ -90,22 +88,11 @@ void device_pm_unlock(void)
 void device_pm_add(struct device *dev)
 {
 	pr_debug("PM: Adding info for %s:%s\n",
-		 dev->bus ? dev->bus->name : "No Bus",
-		 kobject_name(&dev->kobj));
+		 dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
 	mutex_lock(&dpm_list_mtx);
-	if (dev->parent) {
-		if (dev->parent->power.status >= DPM_SUSPENDING)
-			dev_warn(dev, "parent %s should not be sleeping\n",
-				 dev_name(dev->parent));
-	} else if (transition_started) {
-		/*
-		 * We refuse to register parentless devices while a PM
-		 * transition is in progress in order to avoid leaving them
-		 * unhandled down the road
-		 */
-		dev_WARN(dev, "Parentless device registered during a PM transaction\n");
-	}
-
+	if (dev->parent && dev->parent->power.in_suspend)
+		dev_warn(dev, "parent %s should not be sleeping\n",
+			dev_name(dev->parent));
 	list_add_tail(&dev->power.entry, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 }
@@ -117,8 +104,7 @@ void device_pm_add(struct device *dev)
 void device_pm_remove(struct device *dev)
 {
 	pr_debug("PM: Removing info for %s:%s\n",
-		 dev->bus ? dev->bus->name : "No Bus",
-		 kobject_name(&dev->kobj));
+		 dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
 	complete_all(&dev->power.completion);
 	mutex_lock(&dpm_list_mtx);
 	list_del_init(&dev->power.entry);
@@ -135,10 +121,8 @@ void device_pm_remove(struct device *dev)
 void device_pm_move_before(struct device *deva, struct device *devb)
 {
 	pr_debug("PM: Moving %s:%s before %s:%s\n",
-		 deva->bus ? deva->bus->name : "No Bus",
-		 kobject_name(&deva->kobj),
-		 devb->bus ? devb->bus->name : "No Bus",
-		 kobject_name(&devb->kobj));
+		 deva->bus ? deva->bus->name : "No Bus", dev_name(deva),
+		 devb->bus ? devb->bus->name : "No Bus", dev_name(devb));
 	/* Delete deva from dpm_list and reinsert before devb. */
 	list_move_tail(&deva->power.entry, &devb->power.entry);
 }
@@ -151,10 +135,8 @@ void device_pm_move_before(struct device *deva, struct device *devb)
 void device_pm_move_after(struct device *deva, struct device *devb)
 {
 	pr_debug("PM: Moving %s:%s after %s:%s\n",
-		 deva->bus ? deva->bus->name : "No Bus",
-		 kobject_name(&deva->kobj),
-		 devb->bus ? devb->bus->name : "No Bus",
-		 kobject_name(&devb->kobj));
+		 deva->bus ? deva->bus->name : "No Bus", dev_name(deva),
+		 devb->bus ? devb->bus->name : "No Bus", dev_name(devb));
 	/* Delete deva from dpm_list and reinsert after devb. */
 	list_move(&deva->power.entry, &devb->power.entry);
 }
@@ -166,8 +148,7 @@ void device_pm_move_after(struct device *deva, struct device *devb)
 void device_pm_move_last(struct device *dev)
 {
 	pr_debug("PM: Moving %s:%s to end of list\n",
-		 dev->bus ? dev->bus->name : "No Bus",
-		 kobject_name(&dev->kobj));
+		 dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
 	list_move_tail(&dev->power.entry, &dpm_list);
 }
 
@@ -303,7 +284,7 @@ static int pm_noirq_op(struct device *dev,
 			pm_message_t state)
 {
 	int error = 0;
-	ktime_t calltime, delta, rettime;
+	ktime_t calltime = ktime_set(0, 0), delta, rettime;
 
 	if (initcall_debug) {
 		pr_info("calling  %s+ @ %i, parent: %s\n",
@@ -405,7 +386,7 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
 			int error)
 {
 	printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n",
-		kobject_name(&dev->kobj), pm_verb(state.event), info, error);
+		dev_name(dev), pm_verb(state.event), info, error);
 }
 
 static void dpm_show_time(ktime_t starttime, pm_message_t state, char *info)
@@ -475,33 +456,24 @@ End:
  */
 void dpm_resume_noirq(pm_message_t state)
 {
-	struct list_head list;
 	ktime_t starttime = ktime_get();
 
-	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
-	transition_started = false;
-	while (!list_empty(&dpm_list)) {
-		struct device *dev = to_device(dpm_list.next);
+	while (!list_empty(&dpm_noirq_list)) {
+		struct device *dev = to_device(dpm_noirq_list.next);
+		int error;
 
 		get_device(dev);
-		if (dev->power.status > DPM_OFF) {
-			int error;
-
-			dev->power.status = DPM_OFF;
-			mutex_unlock(&dpm_list_mtx);
+		list_move_tail(&dev->power.entry, &dpm_suspended_list);
+		mutex_unlock(&dpm_list_mtx);
 
-			error = device_resume_noirq(dev, state);
+		error = device_resume_noirq(dev, state);
+		if (error)
+			pm_dev_err(dev, state, " early", error);
 
-			mutex_lock(&dpm_list_mtx);
-			if (error)
-				pm_dev_err(dev, state, " early", error);
-		}
-		if (!list_empty(&dev->power.entry))
-			list_move_tail(&dev->power.entry, &list);
+		mutex_lock(&dpm_list_mtx);
 		put_device(dev);
 	}
-	list_splice(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	dpm_show_time(starttime, state, "early");
 	resume_device_irqs();
@@ -544,7 +516,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
 	dpm_wait(dev->parent, async);
 	device_lock(dev);
 
-	dev->power.status = DPM_RESUMING;
+	dev->power.in_suspend = false;
 
 	if (dev->bus) {
 		if (dev->bus->pm) {
@@ -610,19 +582,14 @@ static bool is_async(struct device *dev)
  */
 static void dpm_resume(pm_message_t state)
 {
-	struct list_head list;
 	struct device *dev;
 	ktime_t starttime = ktime_get();
 
-	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
 	pm_transition = state;
 	async_error = 0;
 
-	list_for_each_entry(dev, &dpm_list, power.entry) {
-		if (dev->power.status < DPM_OFF)
-			continue;
-
+	list_for_each_entry(dev, &dpm_suspended_list, power.entry) {
 		INIT_COMPLETION(dev->power.completion);
 		if (is_async(dev)) {
 			get_device(dev);
@@ -630,28 +597,24 @@ static void dpm_resume(pm_message_t state)
 		}
 	}
 
-	while (!list_empty(&dpm_list)) {
-		dev = to_device(dpm_list.next);
+	while (!list_empty(&dpm_suspended_list)) {
+		dev = to_device(dpm_suspended_list.next);
 		get_device(dev);
-		if (dev->power.status >= DPM_OFF && !is_async(dev)) {
+		if (!is_async(dev)) {
 			int error;
 
 			mutex_unlock(&dpm_list_mtx);
 
 			error = device_resume(dev, state, false);
-
-			mutex_lock(&dpm_list_mtx);
 			if (error)
 				pm_dev_err(dev, state, "", error);
-		} else if (dev->power.status == DPM_SUSPENDING) {
-			/* Allow new children of the device to be registered */
-			dev->power.status = DPM_RESUMING;
+
+			mutex_lock(&dpm_list_mtx);
 		}
 		if (!list_empty(&dev->power.entry))
-			list_move_tail(&dev->power.entry, &list);
+			list_move_tail(&dev->power.entry, &dpm_prepared_list);
 		put_device(dev);
 	}
-	list_splice(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	async_synchronize_full();
 	dpm_show_time(starttime, state, NULL);
@@ -697,22 +660,18 @@ static void dpm_complete(pm_message_t state)
 
 	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
-	transition_started = false;
-	while (!list_empty(&dpm_list)) {
-		struct device *dev = to_device(dpm_list.prev);
+	while (!list_empty(&dpm_prepared_list)) {
+		struct device *dev = to_device(dpm_prepared_list.prev);
 
 		get_device(dev);
-		if (dev->power.status > DPM_ON) {
-			dev->power.status = DPM_ON;
-			mutex_unlock(&dpm_list_mtx);
+		dev->power.in_suspend = false;
+		list_move(&dev->power.entry, &list);
+		mutex_unlock(&dpm_list_mtx);
 
-			device_complete(dev, state);
-			pm_runtime_put_sync(dev);
+		device_complete(dev, state);
+		pm_runtime_put_sync(dev);
 
-			mutex_lock(&dpm_list_mtx);
-		}
-		if (!list_empty(&dev->power.entry))
-			list_move(&dev->power.entry, &list);
+		mutex_lock(&dpm_list_mtx);
 		put_device(dev);
 	}
 	list_splice(&list, &dpm_list);
@@ -802,15 +761,13 @@ End:
  */
 int dpm_suspend_noirq(pm_message_t state)
 {
-	struct list_head list;
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
-	INIT_LIST_HEAD(&list);
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);
-	while (!list_empty(&dpm_list)) {
-		struct device *dev = to_device(dpm_list.prev);
+	while (!list_empty(&dpm_suspended_list)) {
+		struct device *dev = to_device(dpm_suspended_list.prev);
 
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
@@ -823,12 +780,10 @@ int dpm_suspend_noirq(pm_message_t state)
 			put_device(dev);
 			break;
 		}
-		dev->power.status = DPM_OFF_IRQ;
 		if (!list_empty(&dev->power.entry))
-			list_move(&dev->power.entry, &list);
+			list_move(&dev->power.entry, &dpm_noirq_list);
 		put_device(dev);
 	}
-	list_splice_tail(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	if (error)
 		dpm_resume_noirq(resume_event(state));
@@ -876,6 +831,11 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	if (async_error)
 		goto End;
 
+	if (pm_wakeup_pending()) {
+		async_error = -EBUSY;
+		goto End;
+	}
+
 	if (dev->class) {
 		if (dev->class->pm) {
 			pm_dev_dbg(dev, state, "class ");
@@ -907,9 +867,6 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		}
 	}
 
-	if (!error)
-		dev->power.status = DPM_OFF;
-
  End:
 	device_unlock(dev);
 	complete_all(&dev->power.completion);
@@ -951,16 +908,14 @@ static int device_suspend(struct device *dev)
  */
 static int dpm_suspend(pm_message_t state)
 {
-	struct list_head list;
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
-	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
 	pm_transition = state;
 	async_error = 0;
-	while (!list_empty(&dpm_list)) {
-		struct device *dev = to_device(dpm_list.prev);
+	while (!list_empty(&dpm_prepared_list)) {
+		struct device *dev = to_device(dpm_prepared_list.prev);
 
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
@@ -974,12 +929,11 @@ static int dpm_suspend(pm_message_t state)
 			break;
 		}
 		if (!list_empty(&dev->power.entry))
-			list_move(&dev->power.entry, &list);
+			list_move(&dev->power.entry, &dpm_suspended_list);
 		put_device(dev);
 		if (async_error)
 			break;
 	}
-	list_splice(&list, dpm_list.prev);
 	mutex_unlock(&dpm_list_mtx);
 	async_synchronize_full();
 	if (!error)
@@ -1038,22 +992,20 @@ static int device_prepare(struct device *dev, pm_message_t state)
  */
 static int dpm_prepare(pm_message_t state)
 {
-	struct list_head list;
 	int error = 0;
 
-	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
-	transition_started = true;
 	while (!list_empty(&dpm_list)) {
 		struct device *dev = to_device(dpm_list.next);
 
 		get_device(dev);
-		dev->power.status = DPM_PREPARING;
 		mutex_unlock(&dpm_list_mtx);
 
 		pm_runtime_get_noresume(dev);
-		if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) {
-			/* Wake-up requested during system sleep transition. */
+		if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+			pm_wakeup_event(dev, 0);
+
+		if (pm_wakeup_pending()) {
 			pm_runtime_put_sync(dev);
 			error = -EBUSY;
 		} else {
@@ -1062,24 +1014,22 @@ static int dpm_prepare(pm_message_t state)
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
-			dev->power.status = DPM_ON;
 			if (error == -EAGAIN) {
 				put_device(dev);
 				error = 0;
 				continue;
 			}
-			printk(KERN_ERR "PM: Failed to prepare device %s "
-				"for power transition: error %d\n",
-				kobject_name(&dev->kobj), error);
+			printk(KERN_INFO "PM: Device %s not prepared "
+				"for power transition: code %d\n",
+				dev_name(dev), error);
 			put_device(dev);
 			break;
 		}
-		dev->power.status = DPM_SUSPENDING;
+		dev->power.in_suspend = true;
 		if (!list_empty(&dev->power.entry))
-			list_move_tail(&dev->power.entry, &list);
+			list_move_tail(&dev->power.entry, &dpm_prepared_list);
 		put_device(dev);
 	}
-	list_splice(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	return error;
 }
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 02c652be83e..656493a5e07 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -250,13 +250,16 @@ static int rpm_callback(int (*cb)(struct device *), struct device *dev)
 	if (!cb)
 		return -ENOSYS;
 
-	spin_unlock_irq(&dev->power.lock);
+	if (dev->power.irq_safe) {
+		retval = cb(dev);
+	} else {
+		spin_unlock_irq(&dev->power.lock);
 
-	retval = cb(dev);
+		retval = cb(dev);
 
-	spin_lock_irq(&dev->power.lock);
+		spin_lock_irq(&dev->power.lock);
+	}
 	dev->power.runtime_error = retval;
-
 	return retval;
 }
 
@@ -404,7 +407,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 		goto out;
 	}
 
-	if (parent && !parent->power.ignore_children) {
+	if (parent && !parent->power.ignore_children && !dev->power.irq_safe) {
 		spin_unlock_irq(&dev->power.lock);
 
 		pm_request_idle(parent);
@@ -527,10 +530,13 @@ static int rpm_resume(struct device *dev, int rpmflags)
 
 	if (!parent && dev->parent) {
 		/*
-		 * Increment the parent's resume counter and resume it if
-		 * necessary.
+		 * Increment the parent's usage counter and resume it if
+		 * necessary.  Not needed if dev is irq-safe; then the
+		 * parent is permanently resumed.
 		 */
 		parent = dev->parent;
+		if (dev->power.irq_safe)
+			goto skip_parent;
 		spin_unlock(&dev->power.lock);
 
 		pm_runtime_get_noresume(parent);
@@ -553,6 +559,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
 			goto out;
 		goto repeat;
 	}
+ skip_parent:
 
 	if (dev->power.no_callbacks)
 		goto no_callback;	/* Assume success. */
@@ -584,7 +591,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
 		rpm_idle(dev, RPM_ASYNC);
 
  out:
-	if (parent) {
+	if (parent && !dev->power.irq_safe) {
 		spin_unlock_irq(&dev->power.lock);
 
 		pm_runtime_put(parent);
@@ -1065,7 +1072,6 @@ EXPORT_SYMBOL_GPL(pm_runtime_allow);
  * Set the power.no_callbacks flag, which tells the PM core that this
  * device is power-managed through its parent and has no run-time PM
  * callbacks of its own.  The run-time sysfs attributes will be removed.
- *
  */
 void pm_runtime_no_callbacks(struct device *dev)
 {
@@ -1078,6 +1084,27 @@ void pm_runtime_no_callbacks(struct device *dev)
 EXPORT_SYMBOL_GPL(pm_runtime_no_callbacks);
 
 /**
+ * pm_runtime_irq_safe - Leave interrupts disabled during callbacks.
+ * @dev: Device to handle
+ *
+ * Set the power.irq_safe flag, which tells the PM core that the
+ * ->runtime_suspend() and ->runtime_resume() callbacks for this device should
+ * always be invoked with the spinlock held and interrupts disabled.  It also
+ * causes the parent's usage counter to be permanently incremented, preventing
+ * the parent from runtime suspending -- otherwise an irq-safe child might have
+ * to wait for a non-irq-safe parent.
+ */
+void pm_runtime_irq_safe(struct device *dev)
+{
+	if (dev->parent)
+		pm_runtime_get_sync(dev->parent);
+	spin_lock_irq(&dev->power.lock);
+	dev->power.irq_safe = 1;
+	spin_unlock_irq(&dev->power.lock);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_irq_safe);
+
+/**
  * update_autosuspend - Handle a change to a device's autosuspend settings.
  * @dev: Device to handle.
  * @old_delay: The former autosuspend_delay value.
@@ -1199,4 +1226,6 @@ void pm_runtime_remove(struct device *dev)
 	/* Change the status back to 'suspended' to match the initial status. */
 	if (dev->power.runtime_status == RPM_ACTIVE)
 		pm_runtime_set_suspended(dev);
+	if (dev->power.irq_safe && dev->parent)
+		pm_runtime_put_sync(dev->parent);
 }
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 71c5528e1c3..8ec406d8f54 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -542,26 +542,26 @@ static void pm_wakeup_update_hit_counts(void)
 }
 
 /**
- * pm_check_wakeup_events - Check for new wakeup events.
+ * pm_wakeup_pending - Check if power transition in progress should be aborted.
  *
  * Compare the current number of registered wakeup events with its preserved
- * value from the past to check if new wakeup events have been registered since
- * the old value was stored.  Check if the current number of wakeup events being
- * processed is zero.
+ * value from the past and return true if new wakeup events have been registered
+ * since the old value was stored.  Also return true if the current number of
+ * wakeup events being processed is different from zero.
  */
-bool pm_check_wakeup_events(void)
+bool pm_wakeup_pending(void)
 {
 	unsigned long flags;
-	bool ret = true;
+	bool ret = false;
 
 	spin_lock_irqsave(&events_lock, flags);
 	if (events_check_enabled) {
-		ret = ((unsigned int)atomic_read(&event_count) == saved_count)
-			&& !atomic_read(&events_in_progress);
-		events_check_enabled = ret;
+		ret = ((unsigned int)atomic_read(&event_count) != saved_count)
+			|| atomic_read(&events_in_progress);
+		events_check_enabled = !ret;
 	}
 	spin_unlock_irqrestore(&events_lock, flags);
-	if (!ret)
+	if (ret)
 		pm_wakeup_update_hit_counts();
 	return ret;
 }
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b02d0cbce89..34bb17f0301 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -28,6 +28,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
 #include <linux/of_spi.h>
+#include <linux/pm_runtime.h>
 
 static void spidev_release(struct device *dev)
 {
@@ -100,9 +101,8 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-#ifdef	CONFIG_PM
-
-static int spi_suspend(struct device *dev, pm_message_t message)
+#ifdef CONFIG_PM_SLEEP
+static int spi_legacy_suspend(struct device *dev, pm_message_t message)
 {
 	int			value = 0;
 	struct spi_driver	*drv = to_spi_driver(dev->driver);
@@ -117,7 +117,7 @@ static int spi_suspend(struct device *dev, pm_message_t message)
 	return value;
 }
 
-static int spi_resume(struct device *dev)
+static int spi_legacy_resume(struct device *dev)
 {
 	int			value = 0;
 	struct spi_driver	*drv = to_spi_driver(dev->driver);
@@ -132,18 +132,94 @@ static int spi_resume(struct device *dev)
 	return value;
 }
 
+static int spi_pm_suspend(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm)
+		return pm_generic_suspend(dev);
+	else
+		return spi_legacy_suspend(dev, PMSG_SUSPEND);
+}
+
+static int spi_pm_resume(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm)
+		return pm_generic_resume(dev);
+	else
+		return spi_legacy_resume(dev);
+}
+
+static int spi_pm_freeze(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm)
+		return pm_generic_freeze(dev);
+	else
+		return spi_legacy_suspend(dev, PMSG_FREEZE);
+}
+
+static int spi_pm_thaw(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm)
+		return pm_generic_thaw(dev);
+	else
+		return spi_legacy_resume(dev);
+}
+
+static int spi_pm_poweroff(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm)
+		return pm_generic_poweroff(dev);
+	else
+		return spi_legacy_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int spi_pm_restore(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+
+	if (pm)
+		return pm_generic_restore(dev);
+	else
+		return spi_legacy_resume(dev);
+}
 #else
-#define spi_suspend	NULL
-#define spi_resume	NULL
+#define spi_pm_suspend	NULL
+#define spi_pm_resume	NULL
+#define spi_pm_freeze	NULL
+#define spi_pm_thaw	NULL
+#define spi_pm_poweroff	NULL
+#define spi_pm_restore	NULL
 #endif
 
+static const struct dev_pm_ops spi_pm = {
+	.suspend = spi_pm_suspend,
+	.resume = spi_pm_resume,
+	.freeze = spi_pm_freeze,
+	.thaw = spi_pm_thaw,
+	.poweroff = spi_pm_poweroff,
+	.restore = spi_pm_restore,
+	SET_RUNTIME_PM_OPS(
+		pm_generic_runtime_suspend,
+		pm_generic_runtime_resume,
+		pm_generic_runtime_idle
+	)
+};
+
 struct bus_type spi_bus_type = {
 	.name		= "spi",
 	.dev_attrs	= spi_dev_attrs,
 	.match		= spi_match_device,
 	.uevent		= spi_uevent,
-	.suspend	= spi_suspend,
-	.resume		= spi_resume,
+	.pm		= &spi_pm,
 };
 EXPORT_SYMBOL_GPL(spi_bus_type);
 
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index b9278a1fb9e..fca61720b87 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -375,7 +375,7 @@ static int usb_unbind_interface(struct device *dev)
 		 * Just re-enable it without affecting the endpoint toggles.
 		 */
 		usb_enable_interface(udev, intf, false);
-	} else if (!error && intf->dev.power.status == DPM_ON) {
+	} else if (!error && !intf->dev.power.in_suspend) {
 		r = usb_set_interface(udev, intf->altsetting[0].
 				desc.bInterfaceNumber, 0);
 		if (r < 0)
@@ -960,7 +960,7 @@ void usb_rebind_intf(struct usb_interface *intf)
 	}
 
 	/* Try to rebind the interface */
-	if (intf->dev.power.status == DPM_ON) {
+	if (!intf->dev.power.in_suspend) {
 		intf->needs_binding = 0;
 		rc = device_attach(&intf->dev);
 		if (rc < 0)
@@ -1107,8 +1107,7 @@ static int usb_resume_interface(struct usb_device *udev,
 	if (intf->condition == USB_INTERFACE_UNBOUND) {
 
 		/* Carry out a deferred switch to altsetting 0 */
-		if (intf->needs_altsetting0 &&
-				intf->dev.power.status == DPM_ON) {
+		if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) {
 			usb_set_interface(udev, intf->altsetting[0].
 					desc.bInterfaceNumber, 0);
 			intf->needs_altsetting0 = 0;
diff --git a/include/linux/device.h b/include/linux/device.h
index dd489531346..45bc8c1669d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -508,13 +508,13 @@ static inline int device_is_registered(struct device *dev)
 
 static inline void device_enable_async_suspend(struct device *dev)
 {
-	if (dev->power.status == DPM_ON)
+	if (!dev->power.in_suspend)
 		dev->power.async_suspend = true;
 }
 
 static inline void device_disable_async_suspend(struct device *dev)
 {
-	if (dev->power.status == DPM_ON)
+	if (!dev->power.in_suspend)
 		dev->power.async_suspend = false;
 }
 
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 40f3f45702b..dd9c7ab3827 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -367,45 +367,6 @@ extern struct dev_pm