Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits)
  ARM: mach-shmobile: specify CHCLR registers on SH7372
  dma: shdma: fix runtime PM: clear channel buffers on reset
  dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit
  dmaengine/ste_dma40: clear LNK on channel startup
  dmaengine: intel_mid_dma: remove legacy pm interface
  ASoC: mxs: correct 'direction' of device_prep_dma_cyclic
  dmaengine: intel_mid_dma: error path fix
  dmaengine: intel_mid_dma: locking and freeing fixes
  mtd: gpmi-nand: move to dma_transfer_direction
  mtd: fix compile error for gpmi-nand
  mmc: mxs-mmc: fix the dma_transfer_direction migration
  dmaengine: add DMA_TRANS_NONE to dma_transfer_direction
  dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels
  dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe
  dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.
  dma: mxs-dma: fix a typo in comment
  DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
  video i.MX IPU: Fix display connections
  i.MX IPU DMA: Fix wrong burstsize settings
  dmaengine/ste_dma40: allow fixed physical channel
  ...

Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c}

The conflicts looked pretty trivial, but I'll ask people to verify them.

73 files changed, 1872 insertions, 530 deletions

diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 00000000000..3c046ee6e8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,14 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma"
+- reg: Should contain DMA registers location and length
+- interrupts: Should contain DMA interrupt
+
+Examples:
+
+dma@ffffec00 {
+	compatible = "atmel,at91sam9g45-dma";
+	reg = <0xffffec00 0x200>;
+	interrupts = <21>;
+};
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index 94b7e0f96b3..bbe6cb3d185 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -75,6 +75,10 @@ The slave DMA usage consists of following steps:
    slave_sg	- DMA a list of scatter gather buffers from/to a peripheral
    dma_cyclic	- Perform a cyclic DMA operation from/to a peripheral till the
 		  operation is explicitly stopped.
+   interleaved_dma - This is common to Slave as well as M2M clients. For slave
+		 address of devices' fifo could be already known to the driver.
+		 Various types of operations could be expressed by setting
+		 appropriate values to the 'dma_interleaved_template' members.
 
    A non-NULL return of this transfer API represents a "descriptor" for
    the given transaction.
@@ -89,6 +93,10 @@ The slave DMA usage consists of following steps:
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_data_direction direction);
 
+	struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+		struct dma_chan *chan, struct dma_interleaved_template *xt,
+		unsigned long flags);
+
    The peripheral driver is expected to have mapped the scatterlist for
    the DMA operation prior to calling device_prep_slave_sg, and must
    keep the scatterlist mapped until the DMA operation has completed.
diff --git a/MAINTAINERS b/MAINTAINERS
index ece8935025e..341dee3b02c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -745,6 +745,7 @@ M:	Barry Song <baohua.song@csr.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-prima2/
+F:	drivers/dma/sirf-dma*
 
 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index 46d4d876e6f..e82c642fa53 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -37,7 +37,7 @@
  */
 struct ep93xx_dma_data {
 	int				port;
-	enum dma_data_direction		direction;
+	enum dma_transfer_direction	direction;
 	const char			*name;
 };
 
@@ -80,14 +80,14 @@ static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
  * channel supports given DMA direction. Only M2P channels have such
  * limitation, for M2M channels the direction is configurable.
  */
-static inline enum dma_data_direction
+static inline enum dma_transfer_direction
 ep93xx_dma_chan_direction(struct dma_chan *chan)
 {
 	if (!ep93xx_dma_chan_is_m2p(chan))
 		return DMA_NONE;
 
 	/* even channels are for TX, odd for RX */
-	return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+	return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
 }
 
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 1ea89be63e2..6fcf304d3cd 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -445,31 +445,39 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 	},
 };
 
+#define SH7372_CHCLR 0x220
+
 static const struct sh_dmae_channel sh7372_dmae_channels[] = {
 	{
 		.offset = 0,
 		.dmars = 0,
 		.dmars_bit = 0,
+		.chclr_offset = SH7372_CHCLR + 0,
 	}, {
 		.offset = 0x10,
 		.dmars = 0,
 		.dmars_bit = 8,
+		.chclr_offset = SH7372_CHCLR + 0x10,
 	}, {
 		.offset = 0x20,
 		.dmars = 4,
 		.dmars_bit = 0,
+		.chclr_offset = SH7372_CHCLR + 0x20,
 	}, {
 		.offset = 0x30,
 		.dmars = 4,
 		.dmars_bit = 8,
+		.chclr_offset = SH7372_CHCLR + 0x30,
 	}, {
 		.offset = 0x50,
 		.dmars = 8,
 		.dmars_bit = 0,
+		.chclr_offset = SH7372_CHCLR + 0x50,
 	}, {
 		.offset = 0x60,
 		.dmars = 8,
 		.dmars_bit = 8,
+		.chclr_offset = SH7372_CHCLR + 0x60,
 	}
 };
 
@@ -487,6 +495,7 @@ static struct sh_dmae_pdata dma_platform_data = {
 	.ts_shift	= ts_shift,
 	.ts_shift_num	= ARRAY_SIZE(ts_shift),
 	.dmaor_init	= DMAOR_DME,
+	.chclr_present	= 1,
 };
 
 /* Resource order important! */
@@ -494,7 +503,7 @@ static struct resource sh7372_dmae0_resources[] = {
 	{
 		/* Channel registers and DMAOR */
 		.start	= 0xfe008020,
-		.end	= 0xfe00808f,
+		.end	= 0xfe00828f,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -522,7 +531,7 @@ static struct resource sh7372_dmae1_resources[] = {
 	{
 		/* Channel registers and DMAOR */
 		.start	= 0xfe018020,
-		.end	= 0xfe01808f,
+		.end	= 0xfe01828f,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -550,7 +559,7 @@ static struct resource sh7372_dmae2_resources[] = {
 	{
 		/* Channel registers and DMAOR */
 		.start	= 0xfe028020,
-		.end	= 0xfe02808f,
+		.end	= 0xfe02828f,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
index ac24c5c4bc8..fdbe6000154 100644
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ b/arch/arm/plat-mxc/include/mach/mx3fb.h
@@ -22,6 +22,20 @@
 #define FB_SYNC_SWAP_RGB	0x04000000
 #define FB_SYNC_CLK_SEL_EN	0x02000000
 
+/*
+ * Specify the way your display is connected. The IPU can arbitrarily
+ * map the internal colors to the external data lines. We only support
+ * the following mappings at the moment.
+ */
+enum disp_data_mapping {
+	/* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
+	IPU_DISP_DATA_MAPPING_RGB666,
+	/* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
+	IPU_DISP_DATA_MAPPING_RGB565,
+	/* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
+	IPU_DISP_DATA_MAPPING_RGB888,
+};
+
 /**
  * struct mx3fb_platform_data - mx3fb platform data
  *
@@ -33,6 +47,7 @@ struct mx3fb_platform_data {
 	const char			*name;
 	const struct fb_videomode	*mode;
 	int				num_modes;
+	enum disp_data_mapping		disp_data_fmt;
 };
 
 #endif
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
index 685c78716d9..fd0ee84c45d 100644
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
@@ -113,7 +113,8 @@ struct stedma40_half_channel_info {
  * @dst_dev_type: Dst device type
  * @src_info: Parameters for dst half channel
  * @dst_info: Parameters for dst half channel
- *
+ * @use_fixed_channel: if true, use physical channel specified by phy_channel
+ * @phy_channel: physical channel to use, only if use_fixed_channel is true
  *
  * This structure has to be filled by the client drivers.
  * It is recommended to do all dma configurations for clients in the machine.
@@ -129,6 +130,9 @@ struct stedma40_chan_cfg {
 	int					 dst_dev_type;
 	struct stedma40_half_channel_info	 src_info;
 	struct stedma40_half_channel_info	 dst_info;
+
+	bool					 use_fixed_channel;
+	int					 phy_channel;
 };
 
 /**
@@ -153,6 +157,7 @@ struct stedma40_platform_data {
 	struct stedma40_chan_cfg	*memcpy_conf_phy;
 	struct stedma40_chan_cfg	*memcpy_conf_log;
 	int				 disabled_channels[STEDMA40_MAX_PHYS];
+	bool				 use_esram_lcla;
 };
 
 #ifdef CONFIG_STE_DMA40
@@ -187,7 +192,7 @@ static inline struct
 dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
 					    dma_addr_t addr,
 					    unsigned int size,
-					    enum dma_data_direction direction,
+					    enum dma_transfer_direction direction,
 					    unsigned long flags)
 {
 	struct scatterlist sg;
@@ -209,7 +214,7 @@ static inline struct
 dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
 					    dma_addr_t addr,
 					    unsigned int size,
-					    enum dma_data_direction direction,
+					    enum dma_transfer_direction direction,
 					    unsigned long flags)
 {
 	return NULL;
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 2cded872f22..0747c77a2fd 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -37,14 +37,14 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
 				(void *)dma_ch;
 	chan = dma_request_channel(mask, pl330_filter, filter_param);
 
-	if (info->direction == DMA_FROM_DEVICE) {
+	if (info->direction == DMA_DEV_TO_MEM) {
 		memset(&slave_config, 0, sizeof(struct dma_slave_config));
 		slave_config.direction = info->direction;
 		slave_config.src_addr = info->fifo;
 		slave_config.src_addr_width = info->width;
 		slave_config.src_maxburst = 1;
 		dmaengine_slave_config(chan, &slave_config);
-	} else if (info->direction == DMA_TO_DEVICE) {
+	} else if (info->direction == DMA_MEM_TO_DEV) {
 		memset(&slave_config, 0, sizeof(struct dma_slave_config));
 		slave_config.direction = info->direction;
 		slave_config.dst_addr = info->fifo;
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
index 22eafc310bd..70b6325edb9 100644
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -17,7 +17,7 @@
 
 struct samsung_dma_prep_info {
 	enum dma_transaction_type cap;
-	enum dma_data_direction direction;
+	enum dma_transfer_direction direction;
 	dma_addr_t buf;
 	unsigned long period;
 	unsigned long len;
@@ -27,7 +27,7 @@ struct samsung_dma_prep_info {
 
 struct samsung_dma_info {
 	enum dma_transaction_type cap;
-	enum dma_data_direction direction;
+	enum dma_transfer_direction direction;
 	enum dma_slave_buswidth width;
 	dma_addr_t fifo;
 	struct s3c2410_dma_client *client;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 5a99bb3f255..f1a274994bb 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -124,7 +124,7 @@ config MV_XOR
 
 config MX3_IPU
 	bool "MX3x Image Processing Unit support"
-	depends on SOC_IMX31 || SOC_IMX35
+	depends on ARCH_MXC
 	select DMA_ENGINE
 	default y
 	help
@@ -187,6 +187,13 @@ config TIMB_DMA
 	help
 	  Enable support for the Timberdale FPGA DMA engine.
 
+config SIRF_DMA
+	tristate "CSR SiRFprimaII DMA support"
+	depends on ARCH_PRIMA2
+	select DMA_ENGINE
+	help
+	  Enable support for the CSR SiRFprimaII DMA engine.
+
 config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
 	bool
 
@@ -201,26 +208,26 @@ config PL330_DMA
 	  platform_data for a dma-pl330 device.
 
 config PCH_DMA
-	tristate "Intel EG20T PCH / OKI Semi IOH(ML7213/ML7223) DMA support"
+	tristate "Intel EG20T PCH / LAPIS Semicon IOH(ML7213/ML7223/ML7831) DMA"
 	depends on PCI && X86
 	select DMA_ENGINE
 	help
 	  Enable support for Intel EG20T PCH DMA engine.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7213, ML7223 and ML7831.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config IMX_SDMA
 	tristate "i.MX SDMA support"
-	depends on ARCH_MX25 || SOC_IMX31 || SOC_IMX35 || ARCH_MX5
+	depends on ARCH_MXC
 	select DMA_ENGINE
 	help
 	  Support the i.MX SDMA engine. This engine is integrated into
-	  Freescale i.MX25/31/35/51 chips.
+	  Freescale i.MX25/31/35/51/53 chips.
 
 config IMX_DMA
 	tristate "i.MX DMA support"
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 30cf3b1f0c5..009a222e828 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_IMX_SDMA) += imx-sdma.o
 obj-$(CONFIG_IMX_DMA) += imx-dma.o
 obj-$(CONFIG_MXS_DMA) += mxs-dma.o
 obj-$(CONFIG_TIMB_DMA) += timb_dma.o
+obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_PL330_DMA) += pl330.o
 obj-$(CONFIG_PCH_DMA) += pch_dma.o
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 0698695e8bf..8a281584458 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -854,8 +854,10 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
 	int ret;
 
 	/* Check if we already have a channel */
-	if (plchan->phychan)
-		return 0;
+	if (plchan->phychan) {
+		ch = plchan->phychan;
+		goto got_channel;
+	}
 
 	ch = pl08x_get_phy_channel(pl08x, plchan);
 	if (!ch) {
@@ -880,21 +882,22 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
 			return -EBUSY;
 		}
 		ch->signal = ret;
-
-		/* Assign the flow control signal to this channel */
-		if (txd->direction == DMA_TO_DEVICE)
-			txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
-		else if (txd->direction == DMA_FROM_DEVICE)
-			txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
 	}
 
+	plchan->phychan = ch;
 	dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n",
 		 ch->id,
 		 ch->signal,
 		 plchan->name);
 
+got_channel:
+	/* Assign the flow control signal to this channel */
+	if (txd->direction == DMA_MEM_TO_DEV)
+		txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
+	else if (txd->direction == DMA_DEV_TO_MEM)
+		txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
+
 	plchan->phychan_hold++;
-	plchan->phychan = ch;
 
 	return 0;
 }
@@ -1102,10 +1105,10 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 
 	/* Transfer direction */
 	plchan->runtime_direction = config->direction;
-	if (config->direction == DMA_TO_DEVICE) {
+	if (config->direction == DMA_MEM_TO_DEV) {
 		addr_width = config->dst_addr_width;
 		maxburst = config->dst_maxburst;
-	} else if (config->direction == DMA_FROM_DEVICE) {
+	} else if (config->direction == DMA_DEV_TO_MEM) {
 		addr_width = config->src_addr_width;
 		maxburst = config->src_maxburst;
 	} else {
@@ -1136,7 +1139,7 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 	cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
 	cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
 
-	if (plchan->runtime_direction == DMA_FROM_DEVICE) {
+	if (plchan->runtime_direction == DMA_DEV_TO_MEM) {
 		plchan->src_addr = config->src_addr;
 		plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
 			pl08x_select_bus(plchan->cd->periph_buses,
@@ -1152,7 +1155,7 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 		"configured channel %s (%s) for %s, data width %d, "
 		"maxburst %d words, LE, CCTL=0x%08x\n",
 		dma_chan_name(chan), plchan->name,
-		(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
+		(config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
 		addr_width,
 		maxburst,
 		cctl);
@@ -1322,7 +1325,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
 
 static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 		struct dma_chan *chan, struct scatterlist *sgl,
-		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned int sg_len, enum dma_transfer_direction direction,
 		unsigned long flags)