[ALSA] ac97: YMF743 missing controls support (1/2)

These patches enable some YMF743 controls (Tone/3D/IEC958) that won't
be detected with the current version of ALSA.
The first one contains only cosmetic changes to share a few
YMF753-specific symbols with YMF743.

Signed-off-by: Keita Maehara <maehara@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

2 files changed, 46 insertions, 30 deletions

diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 246ac23534b..3b9eed7b1bf 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -345,9 +345,9 @@
 #define AC97_ALC650_GPIO_STATUS		0x78
 #define AC97_ALC650_CLOCK		0x7a
 
-/* specific - Yamaha YMF753 */
-#define AC97_YMF753_DIT_CTRL2	0x66	/* DIT Control 2 */
-#define AC97_YMF753_3D_MODE_SEL	0x68	/* 3D Mode Select */
+/* specific - Yamaha YMF7x3 */
+#define AC97_YMF7X3_DIT_CTRL	0x66	/* DIT Control (YMF743) / 2 (YMF753) */
+#define AC97_YMF7X3_3D_MODE_SEL	0x68	/* 3D Mode Select */
 
 /* specific - C-Media */
 #define AC97_CM9738_VENDOR_CTRL	0x5a
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 630c961895d..075ac4e14bc 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -205,8 +205,11 @@ static inline int is_shared_micin(struct snd_ac97 *ac97)
 
 /* The following snd_ac97_ymf753_... items added by David Shust (dshust@shustring.com) */
 
-/* It is possible to indicate to the Yamaha YMF753 the type of speakers being used. */
-static int snd_ac97_ymf753_info_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+/* It is possible to indicate to the Yamaha YMF7x3 the type of
+   speakers being used. */
+
+static int snd_ac97_ymf7x3_info_speaker(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *uinfo)
 {
 	static char *texts[3] = {
 		"Standard", "Small", "Smaller"
@@ -221,12 +224,13 @@ static int snd_ac97_ymf753_info_speaker(struct snd_kcontrol *kcontrol, struct sn
 	return 0;
 }
 
-static int snd_ac97_ymf753_get_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_ymf7x3_get_speaker(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
 	unsigned short val;
 
-	val = ac97->regs[AC97_YMF753_3D_MODE_SEL];
+	val = ac97->regs[AC97_YMF7X3_3D_MODE_SEL];
 	val = (val >> 10) & 3;
 	if (val > 0)    /* 0 = invalid */
 		val--;
@@ -234,7 +238,8 @@ static int snd_ac97_ymf753_get_speaker(struct snd_kcontrol *kcontrol, struct snd
 	return 0;
 }
 
-static int snd_ac97_ymf753_put_speaker(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_ymf7x3_put_speaker(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
 	unsigned short val;
@@ -242,20 +247,22 @@ static int snd_ac97_ymf753_put_speaker(struct snd_kcontrol *kcontrol, struct snd
 	if (ucontrol->value.enumerated.item[0] > 2)
 		return -EINVAL;
 	val = (ucontrol->value.enumerated.item[0] + 1) << 10;
-	return snd_ac97_update(ac97, AC97_YMF753_3D_MODE_SEL, val);
+	return snd_ac97_update(ac97, AC97_YMF7X3_3D_MODE_SEL, val);
 }
 
-static const struct snd_kcontrol_new snd_ac97_ymf753_controls_speaker =
+static const struct snd_kcontrol_new snd_ac97_ymf7x3_controls_speaker =
 {
 	.iface  = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name   = "3D Control - Speaker",
-	.info   = snd_ac97_ymf753_info_speaker,
-	.get    = snd_ac97_ymf753_get_speaker,
-	.put    = snd_ac97_ymf753_put_speaker,
+	.info   = snd_ac97_ymf7x3_info_speaker,
+	.get    = snd_ac97_ymf7x3_get_speaker,
+	.put    = snd_ac97_ymf7x3_put_speaker,
 };
 
-/* It is possible to indicate to the Yamaha YMF753 the source to direct to the S/PDIF output. */
-static int snd_ac97_ymf753_spdif_source_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+/* It is possible to indicate to the Yamaha YMF7x3 the source to
+   direct to the S/PDIF output. */
+static int snd_ac97_ymf7x3_spdif_source_info(struct snd_kcontrol *kcontrol,
+					     struct snd_ctl_elem_info *uinfo)
 {
 	static char *texts[2] = { "AC-Link", "A/D Converter" };
 
@@ -268,17 +275,19 @@ static int snd_ac97_ymf753_spdif_source_info(struct snd_kcontrol *kcontrol, stru
 	return 0;
 }
 
-static int snd_ac97_ymf753_spdif_source_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_ymf7x3_spdif_source_get(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
 	unsigned short val;
 
-	val = ac97->regs[AC97_YMF753_DIT_CTRL2];
+	val = ac97->regs[AC97_YMF7X3_DIT_CTRL];
 	ucontrol->value.enumerated.item[0] = (val >> 1) & 1;
 	return 0;
 }
 
-static int snd_ac97_ymf753_spdif_source_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int snd_ac97_ymf7x3_spdif_source_put(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
 	unsigned short val;
@@ -286,7 +295,7 @@ static int snd_ac97_ymf753_spdif_source_put(struct snd_kcontrol *kcontrol, struc
 	if (ucontrol->value.enumerated.item[0] > 1)
 		return -EINVAL;
 	val = ucontrol->value.enumerated.item[0] << 1;
-	return snd_ac97_update_bits(ac97, AC97_YMF753_DIT_CTRL2, 0x0002, val);
+	return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0002, val);
 }
 
 /* The AC'97 spec states that the S/PDIF signal is to be output at pin 48.
@@ -311,7 +320,7 @@ static int snd_ac97_ymf753_spdif_output_pin_get(struct snd_kcontrol *kcontrol, s
 	struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
 	unsigned short val;
 
-	val = ac97->regs[AC97_YMF753_DIT_CTRL2];
+	val = ac97->regs[AC97_YMF7X3_DIT_CTRL];
 	ucontrol->value.enumerated.item[0] = (val & 0x0008) ? 2 : (val & 0x0020) ? 1 : 0;
 	return 0;
 }
@@ -325,7 +334,7 @@ static int snd_ac97_ymf753_spdif_output_pin_put(struct snd_kcontrol *kcontrol, s
 		return -EINVAL;
 	val = (ucontrol->value.enumerated.item[0] == 2) ? 0x0008 :
 	      (ucontrol->value.enumerated.item[0] == 1) ? 0x0020 : 0;
-	return snd_ac97_update_bits(ac97, AC97_YMF753_DIT_CTRL2, 0x0028, val);
+	return snd_ac97_update_bits(ac97, AC97_YMF7X3_DIT_CTRL, 0x0028, val);
 	/* The following can be used to direct S/PDIF output to pin 47 (EAPD).
 	   snd_ac97_write_cache(ac97, 0x62, snd_ac97_read(ac97, 0x62) | 0x0008); */
 }
@@ -334,9 +343,9 @@ static const struct snd_kcontrol_new snd_ac97_ymf753_controls_spdif[3] = {
 	{
 		.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
 		.name	= SNDRV_CTL_NAME_IEC958("",PLAYBACK,NONE) "Source",
-		.info	= snd_ac97_ymf753_spdif_source_info,
-		.get	= snd_ac97_ymf753_spdif_source_get,
-		.put	= snd_ac97_ymf753_spdif_source_put,
+		.info	= snd_ac97_ymf7x3_spdif_source_info,
+		.get	= snd_ac97_ymf7x3_spdif_source_get,
+		.put	= snd_ac97_ymf7x3_spdif_source_put,
 	},
 	{
 		.iface	= SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -345,22 +354,29 @@ static const struct snd_kcontrol_new snd_ac97_ymf753_controls_spdif[3] = {
 		.get	= snd_ac97_ymf753_spdif_output_pin_get,
 		.put	= snd_ac97_ymf753_spdif_output_pin_put,
 	},
-	AC97_SINGLE(SNDRV_CTL_NAME_IEC958("",NONE,NONE) "Mute", AC97_YMF753_DIT_CTRL2, 2, 1, 1)
+	AC97_SINGLE(SNDRV_CTL_NAME_IEC958("", NONE, NONE) "Mute",
+		    AC97_YMF7X3_DIT_CTRL, 2, 1, 1)
 };
 
-static int patch_yamaha_ymf753_3d(struct snd_ac97 * ac97)
+static int patch_yamaha_ymf7x3_3d(struct snd_ac97 *ac97)
 {
 	struct snd_kcontrol *kctl;
 	int err;
 
-	if ((err = snd_ctl_add(ac97->bus->card, kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97))) < 0)
+	kctl = snd_ac97_cnew(&snd_ac97_controls_3d[0], ac97);
+	err = snd_ctl_add(ac97->bus->card, kctl);
+	if (err < 0)
 		return err;
 	strcpy(kctl->id.name, "3D Control - Wide");
 	kctl->private_value = AC97_SINGLE_VALUE(AC97_3D_CONTROL, 9, 7, 0);
 	snd_ac97_write_cache(ac97, AC97_3D_CONTROL, 0x0000);
-	if ((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&snd_ac97_ymf753_controls_speaker, ac97))) < 0)
+
+	err = snd_ctl_add(ac97->bus->card,
+			  snd_ac97_cnew(&snd_ac97_ymf7x3_controls_speaker,
+					ac97));
+	if (err < 0)
 		return err;
-	snd_ac97_write_cache(ac97, AC97_YMF753_3D_MODE_SEL, 0x0c00);
+	snd_ac97_write_cache(ac97, AC97_YMF7X3_3D_MODE_SEL, 0x0c00);
 	return 0;
 }
 
@@ -374,7 +390,7 @@ static int patch_yamaha_ymf753_post_spdif(struct snd_ac97 * ac97)
 }
 
 static struct snd_ac97_build_ops patch_yamaha_ymf753_ops = {
-	.build_3d	= patch_yamaha_ymf753_3d,
+	.build_3d	= patch_yamaha_ymf7x3_3d,
 	.build_post_spdif = patch_yamaha_ymf753_post_spdif
 };