[B43]: add mac80211-based driver for modern BCM43xx devices

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

28 files changed, 16699 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 7524cd802da..e6589c3b69c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -795,6 +795,15 @@ L:	linux-hams@vger.kernel.org
 W:	http://www.baycom.org/~tom/ham/ham.html
 S:	Maintained
 
+B43 WIRELESS DRIVER
+P:	Michael Buesch
+M:	mb@bu3sch.de
+P:	Stefano Brivio
+M:	st3@riseup.net
+L:	linux-wireless@vger.kernel.org
+W:	http://bcm43xx.berlios.de/
+S:	Maintained
+
 BCM43XX WIRELESS DRIVER (SOFTMAC BASED VERSION)
 P:	Larry Finger
 M:	Larry.Finger@lwfinger.net
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 8d1541bbe25..7bed87e63da 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -579,6 +579,7 @@ config ADM8211
 
 source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/bcm43xx/Kconfig"
+source "drivers/net/wireless/b43/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
 
 endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index e9bffdae0a0..765dbbcf54b 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_PRISM54)		+= prism54/
 
 obj-$(CONFIG_HOSTAP)		+= hostap/
 obj-$(CONFIG_BCM43XX)		+= bcm43xx/
+obj-$(CONFIG_B43)		+= b43/
 obj-$(CONFIG_ZD1211RW)		+= zd1211rw/
 
 # 16-bit wireless PCMCIA client drivers
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
new file mode 100644
index 00000000000..4620119891f
--- /dev/null
+++ b/drivers/net/wireless/b43/Kconfig
@@ -0,0 +1,119 @@
+config B43
+	tristate "Broadcom 43xx wireless support (mac80211 stack)"
+	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
+	select SSB
+	select FW_LOADER
+	select HW_RANDOM
+	---help---
+	  b43 is a driver for the Broadcom 43xx series wireless devices.
+
+	  Check "lspci" for something like
+	  "Broadcom Corporation BCM43XX 802.11 Wireless LAN Controller"
+	  to determine whether you own such a device.
+
+	  This driver supports the new BCM43xx IEEE 802.11G devices, but not
+	  the old IEEE 802.11B devices. Old devices are supported by
+	  the b43legacy driver.
+	  Note that this has nothing to do with the standard that your AccessPoint
+	  supports (A, B, G or a combination).
+	  IEEE 802.11G devices can talk to IEEE 802.11B AccessPoints.
+
+	  It is safe to include both b43 and b43legacy as the underlying glue
+	  layer will automatically load the correct version for your device.
+
+	  This driver uses V4 firmware, which must be installed separately using
+	  b43-fwcutter.
+
+	  This driver can be built as a module (recommended) that will be called "b43".
+	  If unsure, say M.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B43_PCI_AUTOSELECT
+	bool
+	depends on B43 && SSB_PCIHOST_POSSIBLE
+	select SSB_PCIHOST
+	default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B43_PCICORE_AUTOSELECT
+	bool
+	depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
+	select SSB_DRIVER_PCICORE
+	default y
+
+config B43_PCMCIA
+	bool "Broadcom 43xx PCMCIA device support (EXPERIMENTAL)"
+	depends on B43 && SSB_PCMCIAHOST_POSSIBLE && EXPERIMENTAL
+	select SSB_PCMCIAHOST
+	---help---
+	  Broadcom 43xx PCMCIA device support.
+
+	  Support for 16bit PCMCIA devices.
+	  Please note that most PC-CARD devices are _NOT_ 16bit PCMCIA
+	  devices, but 32bit CardBUS devices. CardBUS devices are supported
+	  out of the box by b43.
+
+	  With this config option you can drive b43 cards in
+	  CompactFlash formfactor in a PCMCIA adaptor.
+	  CF b43 cards can sometimes be found in handheld PCs.
+
+	  It's safe to select Y here, even if you don't have a B43 PCMCIA device.
+
+	  If unsure, say N.
+
+config B43_DEBUG
+	bool "Broadcom 43xx debugging"
+	depends on B43
+	---help---
+	  Broadcom 43xx debugging messages.
+
+	  Say Y, if you want to find out why the driver does not
+	  work for you.
+
+config B43_DMA
+	bool
+	depends on B43
+config B43_PIO
+	bool
+	depends on B43
+
+choice
+	prompt "Broadcom 43xx data transfer mode"
+	depends on B43
+	default B43_DMA_AND_PIO_MODE
+
+config B43_DMA_AND_PIO_MODE
+	bool "DMA + PIO"
+	select B43_DMA
+	select B43_PIO
+	---help---
+	  Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
+	  data transfer modes.
+	  The actually used mode is selectable through the module
+	  parameter "pio". If the module parameter is pio=0, DMA is used.
+	  Otherwise PIO is used. DMA is default.
+
+	  If unsure, choose this option.
+
+config B43_DMA_MODE
+	bool "DMA (Direct Memory Access) only"
+	select B43_DMA
+	---help---
+	  Only include Direct Memory Access (DMA).
+	  This reduces the size of the driver module, by omitting the PIO code.
+
+config B43_PIO_MODE
+	bool "PIO (Programmed I/O) only"
+	select B43_PIO
+	---help---
+	  Only include Programmed I/O (PIO).
+	  This reduces the size of the driver module, by omitting the DMA code.
+	  Please note that PIO transfers are slow (compared to DMA).
+
+	  Also note that not all devices of the 43xx series support PIO.
+	  The 4306 (Apple Airport Extreme and others) supports PIO, while
+	  the 4318 is known to _not_ support PIO.
+
+	  Only use PIO, if DMA does not work for you.
+
+endchoice
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
new file mode 100644
index 00000000000..370935b84c5
--- /dev/null
+++ b/drivers/net/wireless/b43/Makefile
@@ -0,0 +1,17 @@
+# b43 core
+b43-y				+= main.o
+b43-y				+= tables.o
+b43-y				+= phy.o
+b43-y				+= sysfs.o
+b43-y				+= leds.o
+b43-y				+= xmit.o
+b43-y				+= lo.o
+# b43 PCMCIA support
+b43-$(CONFIG_B43_PCMCIA)	+= pcmcia.o
+# b43 debugging
+b43-$(CONFIG_B43_DEBUG)		+= debugfs.o
+# b43 DMA and PIO
+b43-$(CONFIG_B43_DMA)		+= dma.o
+b43-$(CONFIG_B43_PIO)		+= pio.o
+
+obj-$(CONFIG_B43)		+= b43.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
new file mode 100644
index 00000000000..270a2112de2
--- /dev/null
+++ b/drivers/net/wireless/b43/b43.h
@@ -0,0 +1,845 @@
+#ifndef B43_H_
+#define B43_H_
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/hw_random.h>
+#include <linux/ssb/ssb.h>
+#include <net/mac80211.h>
+
+#include "debugfs.h"
+#include "leds.h"
+#include "lo.h"
+#include "phy.h"
+
+#ifdef CONFIG_B43_DEBUG
+# define B43_DEBUG	1
+#else
+# define B43_DEBUG	0
+#endif
+
+#define B43_RX_MAX_SSI			60
+
+/* MMIO offsets */
+#define B43_MMIO_DMA0_REASON		0x20
+#define B43_MMIO_DMA0_IRQ_MASK		0x24
+#define B43_MMIO_DMA1_REASON		0x28
+#define B43_MMIO_DMA1_IRQ_MASK		0x2C
+#define B43_MMIO_DMA2_REASON		0x30
+#define B43_MMIO_DMA2_IRQ_MASK		0x34
+#define B43_MMIO_DMA3_REASON		0x38
+#define B43_MMIO_DMA3_IRQ_MASK		0x3C
+#define B43_MMIO_DMA4_REASON		0x40
+#define B43_MMIO_DMA4_IRQ_MASK		0x44
+#define B43_MMIO_DMA5_REASON		0x48
+#define B43_MMIO_DMA5_IRQ_MASK		0x4C
+#define B43_MMIO_MACCTL			0x120
+#define B43_MMIO_STATUS2_BITFIELD	0x124
+#define B43_MMIO_GEN_IRQ_REASON		0x128
+#define B43_MMIO_GEN_IRQ_MASK		0x12C
+#define B43_MMIO_RAM_CONTROL		0x130
+#define B43_MMIO_RAM_DATA		0x134
+#define B43_MMIO_PS_STATUS		0x140
+#define B43_MMIO_RADIO_HWENABLED_HI	0x158
+#define B43_MMIO_SHM_CONTROL		0x160
+#define B43_MMIO_SHM_DATA		0x164
+#define B43_MMIO_SHM_DATA_UNALIGNED	0x166
+#define B43_MMIO_XMITSTAT_0		0x170
+#define B43_MMIO_XMITSTAT_1		0x174
+#define B43_MMIO_REV3PLUS_TSF_LOW	0x180	/* core rev >= 3 only */
+#define B43_MMIO_REV3PLUS_TSF_HIGH	0x184	/* core rev >= 3 only */
+
+/* 32-bit DMA */
+#define B43_MMIO_DMA32_BASE0		0x200
+#define B43_MMIO_DMA32_BASE1		0x220
+#define B43_MMIO_DMA32_BASE2		0x240
+#define B43_MMIO_DMA32_BASE3		0x260
+#define B43_MMIO_DMA32_BASE4		0x280
+#define B43_MMIO_DMA32_BASE5		0x2A0
+/* 64-bit DMA */
+#define B43_MMIO_DMA64_BASE0		0x200
+#define B43_MMIO_DMA64_BASE1		0x240
+#define B43_MMIO_DMA64_BASE2		0x280
+#define B43_MMIO_DMA64_BASE3		0x2C0
+#define B43_MMIO_DMA64_BASE4		0x300
+#define B43_MMIO_DMA64_BASE5		0x340
+/* PIO */
+#define B43_MMIO_PIO1_BASE		0x300
+#define B43_MMIO_PIO2_BASE		0x310
+#define B43_MMIO_PIO3_BASE		0x320
+#define B43_MMIO_PIO4_BASE		0x330
+
+#define B43_MMIO_PHY_VER		0x3E0
+#define B43_MMIO_PHY_RADIO		0x3E2
+#define B43_MMIO_PHY0			0x3E6
+#define B43_MMIO_ANTENNA		0x3E8
+#define B43_MMIO_CHANNEL		0x3F0
+#define B43_MMIO_CHANNEL_EXT		0x3F4
+#define B43_MMIO_RADIO_CONTROL		0x3F6
+#define B43_MMIO_RADIO_DATA_HIGH	0x3F8
+#define B43_MMIO_RADIO_DATA_LOW		0x3FA
+#define B43_MMIO_PHY_CONTROL		0x3FC
+#define B43_MMIO_PHY_DATA		0x3FE
+#define B43_MMIO_MACFILTER_CONTROL	0x420
+#define B43_MMIO_MACFILTER_DATA		0x422
+#define B43_MMIO_RCMTA_COUNT		0x43C
+#define B43_MMIO_RADIO_HWENABLED_LO	0x49A
+#define B43_MMIO_GPIO_CONTROL		0x49C
+#define B43_MMIO_GPIO_MASK		0x49E
+#define B43_MMIO_TSF_0			0x632	/* core rev < 3 only */
+#define B43_MMIO_TSF_1			0x634	/* core rev < 3 only */
+#define B43_MMIO_TSF_2			0x636	/* core rev < 3 only */
+#define B43_MMIO_TSF_3			0x638	/* core rev < 3 only */
+#define B43_MMIO_RNG			0x65A
+#define B43_MMIO_POWERUP_DELAY		0x6A8
+
+/* SPROM boardflags_lo values */
+#define B43_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
+#define B43_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
+#define B43_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */
+#define B43_BFL_RSSI			0x0008	/* software calculates nrssi slope. */
+#define B43_BFL_ENETSPI			0x0010	/* has ephy roboswitch spi */
+#define B43_BFL_XTAL_NOSLOW		0x0020	/* no slow clock available */
+#define B43_BFL_CCKHIPWR		0x0040	/* can do high power CCK transmission */
+#define B43_BFL_ENETADM			0x0080	/* has ADMtek switch */
+#define B43_BFL_ENETVLAN		0x0100	/* can do vlan */
+#define B43_BFL_AFTERBURNER		0x0200	/* supports Afterburner mode */
+#define B43_BFL_NOPCI			0x0400	/* leaves PCI floating */
+#define B43_BFL_FEM			0x0800	/* supports the Front End Module */
+#define B43_BFL_EXTLNA			0x1000	/* has an external LNA */
+#define B43_BFL_HGPA			0x2000	/* had high gain PA */
+#define B43_BFL_BTCMOD			0x4000	/* BFL_BTCOEXIST is given in alternate GPIOs */
+#define B43_BFL_ALTIQ			0x8000	/* alternate I/Q settings */
+
+/* GPIO register offset, in both ChipCommon and PCI core. */
+#define B43_GPIO_CONTROL		0x6c
+
+/* SHM Routing */
+enum {
+	B43_SHM_UCODE,		/* Microcode memory */
+	B43_SHM_SHARED,		/* Shared memory */
+	B43_SHM_SCRATCH,	/* Scratch memory */
+	B43_SHM_HW,		/* Internal hardware register */
+	B43_SHM_RCMTA,		/* Receive match transmitter address (rev >= 5 only) */
+};
+/* SHM Routing modifiers */
+#define B43_SHM_AUTOINC_R		0x0200	/* Auto-increment address on read */
+#define B43_SHM_AUTOINC_W		0x0100	/* Auto-increment address on write */
+#define B43_SHM_AUTOINC_RW		(B43_SHM_AUTOINC_R | \
+					 B43_SHM_AUTOINC_W)
+
+/* Misc SHM_SHARED offsets */
+#define B43_SHM_SH_WLCOREREV		0x0016	/* 802.11 core revision */
+#define B43_SHM_SH_PCTLWDPOS		0x0008
+#define B43_SHM_SH_RXPADOFF		0x0034	/* RX Padding data offset (PIO only) */
+#define B43_SHM_SH_PHYVER		0x0050	/* PHY version */
+#define B43_SHM_SH_PHYTYPE		0x0052	/* PHY type */
+#define B43_SHM_SH_ANTSWAP		0x005C	/* Antenna swap threshold */
+#define B43_SHM_SH_HOSTFLO		0x005E	/* Hostflags for ucode options (low) */
+#define B43_SHM_SH_HOSTFHI		0x0060	/* Hostflags for ucode options (high) */
+#define B43_SHM_SH_RFATT		0x0064	/* Current radio attenuation value */
+#define B43_SHM_SH_RADAR		0x0066	/* Radar register */
+#define B43_SHM_SH_PHYTXNOI		0x006E	/* PHY noise directly after TX (lower 8bit only) */
+#define B43_SHM_SH_RFRXSP1		0x0072	/* RF RX SP Register 1 */
+#define B43_SHM_SH_CHAN			0x00A0	/* Current channel (low 8bit only) */
+#define  B43_SHM_SH_CHAN_5GHZ		0x0100	/* Bit set, if 5Ghz channel */
+#define B43_SHM_SH_BCMCFIFOID		0x0108	/* Last posted cookie to the bcast/mcast FIFO */
+/* SHM_SHARED TX FIFO variables */
+#define B43_SHM_SH_SIZE01		0x0098	/* TX FIFO size for FIFO 0 (low) and 1 (high) */
+#define B43_SHM_SH_SIZE23		0x009A	/* TX FIFO size for FIFO 2 and 3 */
+#define B43_SHM_SH_SIZE45		0x009C	/* TX FIFO size for FIFO 4 and 5 */
+#define B43_SHM_SH_SIZE67		0x009E	/* TX FIFO size for FIFO 6 and 7 */
+/* SHM_SHARED background noise */
+#define B43_SHM_SH_JSSI0		0x0088	/* Measure JSSI 0 */
+#define B43_SHM_SH_JSSI1		0x008A	/* Measure JSSI 1 */
+#define B43_SHM_SH_JSSIAUX		0x008C	/* Measure JSSI AUX */
+/* SHM_SHARED crypto engine */
+#define B43_SHM_SH_DEFAULTIV		0x003C	/* Default IV location */
+#define B43_SHM_SH_NRRXTRANS		0x003E	/* # of soft RX transmitter addresses (max 8) */
+#define B43_SHM_SH_KTP			0x0056	/* Key table pointer */
+#define B43_SHM_SH_TKIPTSCTTAK		0x0318
+#define B43_SHM_SH_KEYIDXBLOCK		0x05D4	/* Key index/algorithm block (v4 firmware) */
+#define B43_SHM_SH_PSM			0x05F4	/* PSM transmitter address match block (rev < 5) */
+/* SHM_SHARED WME variables */
+#define B43_SHM_SH_EDCFSTAT		0x000E	/* EDCF status */
+#define B43_SHM_SH_TXFCUR		0x0030	/* TXF current index */
+#define B43_SHM_SH_EDCFQ		0x0240	/* EDCF Q info */
+/* SHM_SHARED powersave mode related */
+#define B43_SHM_SH_SLOTT		0x0010	/* Slot time */
+#define B43_SHM_SH_DTIMPER		0x0012	/* DTIM period */
+#define B43_SHM_SH_NOSLPZNATDTIM	0x004C	/* NOSLPZNAT DTIM */
+/* SHM_SHARED beacon variables */
+#define B43_SHM_SH_BTL0			0x0018	/* Beacon template length 0 */
+#define B43_SHM_SH_BTL1			0x001A	/* Beacon template length 1 */
+#define B43_SHM_SH_BTSFOFF		0x001C	/* Beacon TSF offset */
+#define B43_SHM_SH_TIMBPOS		0x001E	/* TIM B position in beacon */
+#define B43_SHM_SH_SFFBLIM		0x0044	/* Short frame fallback retry limit */
+#define B43_SHM_SH_LFFBLIM		0x0046	/* Long frame fallback retry limit */
+#define B43_SHM_SH_BEACPHYCTL		0x0054	/* Beacon PHY TX control word (see PHY TX control) */
+/* SHM_SHARED ACK/CTS control */
+#define B43_SHM_SH_ACKCTSPHYCTL		0x0022	/* ACK/CTS PHY control word (see PHY TX control) */
+/* SHM_SHARED probe response variables */
+#define B43_SHM_SH_PRSSID		0x0160	/* Probe Response SSID */
+#define B43_SHM_SH_PRSSIDLEN		0x0048	/* Probe Response SSID length */
+#define B43_SHM_SH_PRTLEN		0x004A	/* Probe Response template length */
+#define B43_SHM_SH_PRMAXTIME		0x0074	/* Probe Response max time */
+#define B43_SHM_SH_PRPHYCTL		0x0188	/* Probe Response PHY TX control word */
+/* SHM_SHARED rate tables */
+#define B43_SHM_SH_OFDMDIRECT		0x01C0	/* Pointer to OFDM direct map */
+#define B43_SHM_SH_OFDMBASIC		0x01E0	/* Pointer to OFDM basic rate map */
+#define B43_SHM_SH_CCKDIRECT		0x0200	/* Pointer to CCK direct map */
+#define B43_SHM_SH_CCKBASIC		0x0220	/* Pointer to CCK basic rate map */
+/* SHM_SHARED microcode soft registers */
+#define B43_SHM_SH_UCODEREV		0x0000	/* Microcode revision */
+#define B43_SHM_SH_UCODEPATCH		0x0002	/* Microcode patchlevel */
+#define B43_SHM_SH_UCODEDATE		0x0004	/* Microcode date */
+#define B43_SHM_SH_UCODETIME		0x0006	/* Microcode time */
+#define B43_SHM_SH_UCODESTAT		0x0040	/* Microcode debug status code */
+#define  B43_SHM_SH_UCODESTAT_INVALID	0
+#define  B43_SHM_SH_UCODESTAT_INIT	1
+#define  B43_SHM_SH_UCODESTAT_ACTIVE	2
+#define  B43_SHM_SH_UCODESTAT_SUSP	3	/* suspended */
+#define  B43_SHM_SH_UCODESTAT_SLEEP	4	/* asleep (PS) */
+#define B43_SHM_SH_MAXBFRAMES		0x0080	/* Maximum number of frames in a burst */
+#define B43_SHM_SH_SPUWKUP		0x0094	/* pre-wakeup for synth PU in us */
+#define B43_SHM_SH_PRETBTT		0x0096	/* pre-TBTT in us */
+
+/* SHM_SCRATCH offsets */
+#define B43_SHM_SC_MINCONT		0x0003	/* Minimum contention window */
+#define B43_SHM_SC_MAXCONT		0x0004	/* Maximum contention window */
+#define B43_SHM_SC_CURCONT		0x0005	/* Current contention window */
+#define B43_SHM_SC_SRLIMIT		0x0006	/* Short retry count limit */
+#define B43_SHM_SC_LRLIMIT		0x0007	/* Long retry count limit */
+#define B43_SHM_SC_DTIMC		0x0008	/* Current DTIM count */
+#define B43_SHM_SC_BTL0LEN		0x0015	/* Beacon 0 template length */
+#define B43_SHM_SC_BTL1LEN		0x0016	/* Beacon 1 template length */
+#define B43_SHM_SC_SCFB			0x0017	/* Short frame transmit count threshold for rate fallback */
+#define B43_SHM_SC_LCFB			0x0018	/* Long frame transmit count threshold for rate fallback */
+
+/* Hardware Radio Enable masks */
+#define B43_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
+#define B43_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
+
+/* HostFlags. See b43_hf_read/write() */
+#define B43_HF_ANTDIVHELP		0x00000001	/* ucode antenna div helper */
+#define B43_HF_SYMW			0x00000002	/* G-PHY SYM workaround */
+#define B43_HF_RXPULLW			0x00000004	/* RX pullup workaround */
+#define B43_HF_CCKBOOST			0x00000008	/* 4dB CCK power boost (exclusive with OFDM boost) */
+#define B43_HF_BTCOEX			0x00000010	/* Bluetooth coexistance */
+#define B43_HF_GDCW			0x00000020	/* G-PHY DV canceller filter bw workaround */
+#define B43_HF_OFDMPABOOST		0x00000040	/* Enable PA gain boost for OFDM */
+#define B43_HF_ACPR			0x00000080	/* Disable for Japan, channel 14 */
+#define B43_HF_EDCF			0x00000100	/* on if WME and MAC suspended */
+#define B43_HF_TSSIRPSMW		0x00000200	/* TSSI reset PSM ucode workaround */
+#define B43_HF_DSCRQ			0x00000400	/* Disable slow clock request in ucode */
+#define B43_HF_ACIW			0x00000800	/* ACI workaround: shift bits by 2 on PHY CRS */
+#define B43_HF_2060W			0x00001000	/* 2060 radio workaround */
+#define B43_HF_RADARW			0x00002000	/* Radar workaround */
+#define B43_HF_USEDEFKEYS		0x00004000	/* Enable use of default keys */
+#define B43_HF_BT4PRIOCOEX		0x00010000	/* Bluetooth 2-priority coexistance */
+#define B43_HF_FWKUP			0x00020000	/* Fast wake-up ucode */
+#define B43_HF_VCORECALC		0x00040000	/* Force VCO recalculation when powering up synthpu */
+#define B43_HF_PCISCW			0x00080000	/* PCI slow clock workaround */
+#define B43_HF_4318TSSI			0x00200000	/* 4318 TSSI */
+#define B43_HF_FBCMCFIFO		0x00400000	/* Flush bcast/mcast FIFO immediately */
+#define B43_HF_HWPCTL			0x00800000	/* Enable hardwarre power control */
+#define B43_HF_BTCOEXALT		0x01000000	/* Bluetooth coexistance in alternate pins */
+#define B43_HF_TXBTCHECK		0x02000000	/* Bluetooth check during transmission */
+#define B43_HF_SKCFPUP			0x04000000	/* Skip CFP update */
+
+/* MacFilter offsets. */
+#define B43_MACFILTER_SELF		0x0000
+#define B43_MACFILTER_BSSID		0x0003
+
+/* PowerControl */
+#define B43_PCTL_IN			0xB0
+#define B43_PCTL_OUT			0xB4
+#define B43_PCTL_OUTENABLE		0xB8
+#define B43_PCTL_XTAL_POWERUP		0x40
+#define B43_PCTL_PLL_POWERDOWN		0x80
+
+/* PowerControl Clock Modes */
+#define B43_PCTL_CLK_FAST		0x00
+#define B43_PCTL_CLK_SLOW		0x01
+#define B43_PCTL_CLK_DYNAMIC		0x02
+
+#define B43_PCTL_FORCE_SLOW		0x0800
+#define B43_PCTL_FORCE_PLL		0x1000
+#define B43_PCTL_DYN_XTAL		0x2000
+
+/* PHYVersioning */
+#define B43_PHYTYPE_A			0x00
+#define B43_PHYTYPE_B			0x01
+#define B43_PHYTYPE_G			0x02
+
+/* PHYRegisters */
+#define B43_PHY_ILT_A_CTRL		0x0072
+#define B43_PHY_ILT_A_DATA1		0x0073
+#define B43_PHY_ILT_A_DATA2		0x0074
+#define B43_PHY_G_LO_CONTROL		0x0810
+#define B43_PHY_ILT_G_CTRL		0x0472
+#define B43_PHY_ILT_G_DATA1		0x0473
+#define B43_PHY_ILT_G_DATA2		0x0474
+#define B43_PHY_A_PCTL			0x007B
+#define B43_PHY_G_PCTL			0x0029
+#define B43_PHY_A_CRS			0x0029
+#define B43_PHY_RADIO_BITFIELD		0x0401
+#define B43_PHY_G_CRS			0x0429
+#define B43_PHY_NRSSILT_CTRL		0x0803
+#define B43_PHY_NRSSILT_DATA		0x0804
+
+/* RadioRegisters */
+#define B43_RADIOCTL_ID			0x01
+
+/* MAC Control bitfield */
+#define B43_MACCTL_ENABLED		0x00000001	/* MAC Enabled */
+#define B43_MACCTL_PSM_RUN		0x00000002	/* Run Microcode */
+#define B43_MACCTL_PSM_JMP0		0x00000004	/* Microcode jump to 0 */
+#define B43_MACCTL_SHM_ENABLED		0x00000100	/* SHM Enabled */
+#define B43_MACCTL_SHM_UPPER		0x00000200	/* SHM Upper */
+#define B43_MACCTL_IHR_ENABLED		0x00000400	/* IHR Region Enabled */
+#define B43_MACCTL_PSM_DBG		0x00002000	/* Microcode debugging enabled */
+#define B43_MACCTL_GPOUTSMSK		0x0000C000	/* GPOUT Select Mask */
+#define B43_MACCTL_BE			0x00010000	/* Big Endian mode */
+#define B43_MACCTL_INFRA		0x00020000	/* Infrastructure mode */
+#define B43_MACCTL_AP			0x00040000	/* AccessPoint mode */
+#define B43_MACCTL_RADIOLOCK		0x00080000	/* Radio lock */
+#define B43_MACCTL_BEACPROMISC		0x00100000	/* Beacon Promiscuous */
+#define B43_MACCTL_KEEP_BADPLCP		0x00200000	/* Keep frames with bad PLCP */
+#define B43_MACCTL_KEEP_CTL		0x00400000	/* Keep control frames */
+#define B43_MACCTL_KEEP_BAD		0x00800000	/* Keep bad frames (FCS) */
+#define B43_MACCTL_PROMISC		0x01000000	/* Promiscuous mode */
+#define B43_MACCTL_HWPS			0x02000000	/* Hardware Power Saving */
+#define B43_MACCTL_AWAKE		0x04000000	/* Device is awake */
+#define B43_MACCTL_CLOSEDNET		0x08000000	/* Closed net (no SSID bcast) */
+#define B43_MACCTL_TBTTHOLD		0x10000000	/* TBTT Hold */
+#define B43_MACCTL_DISCTXSTAT		0x20000000	/* Discard TX status */
+#define B43_MACCTL_DISCPMQ		0x40000000	/* Discard Power Management Queue */
+#define B43_MACCTL_GMODE		0x80000000	/* G Mode */
+
+/* 802.11 core specific TM State Low flags */
+#define B43_TMSLOW_GMODE		0x20000000	/* G Mode Enable */
+#define B43_TMSLOW_PLLREFSEL		0x00200000	/* PLL Frequency Reference Select */
+#define B43_TMSLOW_MACPHYCLKEN		0x00100000	/* MAC PHY Clock Control Enable (rev >= 5) */
+#define B43_TMSLOW_PHYRESET		0x00080000	/* PHY Reset */
+#define B43_TMSLOW_PHYCLKEN		0x00040000	/* PHY Clock Enable */
+
+/* 802.11 core specific TM State High flags */
+#define B43_TMSHIGH_FCLOCK		0x00040000	/* Fast Clock Available (rev >= 5) */
+#define B43_TMSHIGH_APHY		0x00020000	/* A-PHY available (rev >= 5) */
+#define B43_TMSHIGH_GPHY		0x00010000	/* G-PHY available (rev >= 5) */
+
+/* Generic-Interrupt reasons. */
+#define B43_IRQ_MAC_SUSPENDED		0x00000001
+#define B43_IRQ_BEACON			0x00000002
+#define B43_IRQ_TBTT_INDI		0x00000004
+#define B43_IRQ_BEACON_TX_OK		0x00000008
+#define B43_IRQ_BEACON_CANCEL		0x00000010
+#define B43_IRQ_ATIM_END		0x00000020
+#define B43_IRQ_PMQ			0x00000040
+#define B43_IRQ_PIO_WORKAROUND		0x00000100
+#define B43_IRQ_MAC_TXERR		0x00000200
+#define B43_IRQ_PHY_TXERR		0x00000800
+#define B43_IRQ_PMEVENT			0x00001000
+#define B43_IRQ_TIMER0			0x00002000
+#define B43_IRQ_TIMER1			0x00004000
+#define B43_IRQ_DMA			0x00008000
+#define B43_IRQ_TXFIFO_FLUSH_OK		0x00010000
+#define B43_IRQ_CCA_MEASURE_OK		0x00020000
+#define B43_IRQ_NOISESAMPLE_OK		0x00040000
+#define B43_IRQ_UCODE_DEBUG		0x08000000
+#define B43_IRQ_RFKILL			0x10000000
+#define B43_IRQ_TX_OK			0x20000000
+#define B43_IRQ_PHY_G_CHANGED		0x40000000
+#define B43_IRQ_TIMEOUT			0x80000000
+
+#define B43_IRQ_ALL			0xFFFFFFFF
+#define B43_IRQ_MASKTEMPLATE		(B43_IRQ_MAC_SUSPENDED | \
+					 B43_IRQ_BEACON | \
+					 B43_IRQ_TBTT_INDI | \
+					 B43_IRQ_ATIM_END | \
+					 B43_IRQ_PMQ | \
+					 B43_IRQ_MAC_TXERR | \
+					 B43_IRQ_PHY_TXERR | \
+					 B43_IRQ_DMA | \
+					 B43_IRQ_TXFIFO_FLUSH_OK | \
+					 B43_IRQ_NOISESAMPLE_OK | \
+					 B43_IRQ_UCODE_DEBUG | \
+					 B43_IRQ_RFKILL | \
+					 B43_IRQ_TX_OK)
+
+/* Device specific rate values.
+ * The actual values defined here are (rate_in_mbps * 2).
+ * Some code depends on this. Don't change it. */
+#define B43_CCK_RATE_1MB		0x02
+#define B43_CCK_RATE_2MB		0x04
+#define B43_CCK_RATE_5MB		0x0B
+#define B43_CCK_RATE_11MB		0x16
+#define B43_OFDM_RATE_6MB		0x0C
+#define B43_OFDM_RATE_9MB		0x12
+#define B43_OFDM_RATE_12MB		0x18
+#define B43_OFDM_RATE_18MB		0x24
+#define B43_OFDM_RATE_24MB		0x30
+#define B43_OFDM_RATE_36MB		0x48
+#define B43_OFDM_RATE_48MB		0x60
+#define B43_OFDM_RATE_54MB		0x6C
+/* Convert a b43 rate value to a rate in 100kbps */
+#define B43_RATE_TO_BASE100KBPS(rate)	(((rate) * 10) / 2)
+
+#define B43_DEFAULT_SHORT_RETRY_LIMIT	7
+#define B43_DEFAULT_LONG_RETRY_LIMIT	4
+
+/* Max size of a security key */
+#define B43_SEC_KEYSIZE			16
+/* Security algorithms. */
+enum {
+	B43_SEC_ALGO_NONE = 0,	/* unencrypted, as of TX header. */
+	B43_SEC_ALGO_WEP40,
+	B43_SEC_ALGO_TKIP,
+	B43_SEC_ALGO_AES,
+	B43_SEC_ALGO_WEP104,
+	B43_SEC_ALGO_AES_LEGACY,
+};
+
+struct b43_dmaring;
+struct b43_pioqueue;
+
+/* The firmware file header */
+#define B43_FW_TYPE_UCODE	'u'
+#define B43_FW_TYPE_PCM		'p'
+#define B43_FW_TYPE_IV		'i'
+struct b43_fw_header {
+	/* File type */
+	u8 type;
+	/* File format version */
+	u8 ver;
+	u8 __padding[2];
+	/* Size of the data. For ucode and PCM this is in bytes.
+	 * For IV this is number-of-ivs. */
+	__be32 size;
+} __attribute__((__packed__));
+
+/* Initial Value file format */
+#define B43_IV_OFFSET_MASK	0x7FFF
+#define B43_IV_32BIT		0x8000
+struct b43_iv {
+	__be16 offset_size;
+	union {
+		__be16 d16;
+		__be32 d32;
+	} data __attribute__((__packed__));
+} __attribute__((__packed__));
+
+
+#define B43_PHYMODE(phytype)		(1 << (phytype))
+#define B43_PHYMODE_A			B43_PHYMODE(B43_PHYTYPE_A)
+#define B43_PHYMODE_B			B43_PHYMODE(B43_PHYTYPE_B)
+#define B43_PHYMODE_G			B43_PHYMODE(B43_PHYTYPE_G)
+
+struct b43_phy {
+	/* Possible PHYMODEs on this PHY */
+	u8 possible_phymodes;
+	/* GMODE bit enabled? */
+	bool gmode;
+	/* Possible ieee80211 subsystem hwmodes for this PHY.
+	 * Which mode is selected, depends on thr GMODE enabled bit */
+#define B43_MAX_PHYHWMODES	2
+	struct ieee80211_hw_mode hwmodes[B43_MAX_PHYHWMODES];
+
+	/* Analog Type */
+	u8 analog;
+	/* B43_PHYTYPE_ */
+	u8 type;
+	/* PHY revision number. */
+	u8 rev;
+
+	/* Radio versioning */
+	u16 radio_manuf;	/* Radio manufacturer */
+	u16 radio_ver;		/* Radio version */
+	u8 radio_rev;		/* Radio revision */
+
+	bool radio_on;		/* Radio switched on/off */
+	bool locked;		/* Only used in b43_phy_{un}lock() */
+	bool dyn_tssi_tbl;	/* tssi2dbm is kmalloc()ed. */
+
+	/* ACI (adjacent channel interference) flags. */
+	bool aci_enable;
+	bool aci_wlan_automatic;
+	bool aci_hw_rssi;
+
+	u16 minlowsig[2];
+	u16 minlowsigpos[2];
+
+	/* TSSI to dBm table in use */
+	const s8 *tssi2dbm;
+	/* Target idle TSSI */
+	int tgt_idle_tssi;
+	/* Current idle TSSI */
+	int cur_idle_tssi;
+
+	/* LocalOscillator control values. */
+	struct b43_txpower_lo_control *lo_control;
+	/* Values from b43_calc_loopback_gain() */
+	s16 max_lb_gain;	/* Maximum Loopback gain in hdB */
+	s16 trsw_rx_gain;	/* TRSW RX gain in hdB */
+	s16 lna_lod_gain;	/* LNA lod */
+	s16 lna_gain;		/* LNA */
+	s16 pga_gain;		/* PGA */
+
+	/* PHY lock for core.rev < 3
+	 * This lock is only used by b43_phy_{un}lock()
+	 */
+	spinlock_t lock;
+
+	/* Desired TX power level (in dBm).
+	 * This is set by the user and adjusted in b43_phy_xmitpower(). */
+	u8 power_level;
+	/* A-PHY TX Power control value. */
+	u16 txpwr_offset;
+
+	/* Current TX power level attenuation control values */
+	struct b43_bbatt bbatt;
+	struct b43_rfatt rfatt;
+	u8 tx_control;		/* B43_TXCTL_XXX */
+#ifdef CONFIG_B43_DEBUG
+	bool manual_txpower_control;	/* Manual TX-power control enabled? */
+#endif
+	/* Hardware Power Control enabled? */
+	bool hardware_power_control;
+
+	/* Current Interference Mitigation mode */
+	int interfmode;
+	/* Stack of saved values from the Interference Mitigation code.
+	 * Each value in the stack is layed out as follows:
+	 * bit 0-11:  offset
+	 * bit 12-15: register ID
+	 * bit 16-32: value
+	 * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
+	 */
+#define B43_INTERFSTACK_SIZE	26
+	u32 interfstack[B43_INTERFSTACK_SIZE];	//FIXME: use a data structure
+
+	/* Saved values from the NRSSI Slope calculation */
+	s16 nrssi[2];
+	s32 nrssislope;
+	/* In memory nrssi lookup table. */
+	s8 nrssi_lt[64];
+
+	/* current channel */
+	u8 channel;
+
+	u16 lofcal;
+
+	u16 initval;		//FIXME rename?
+};
+
+/* Data structures for DMA transmission, per 80211 core. */
+struct b43_dma {
+	struct b43_dmaring *tx_ring0;
+	struct b43_dmaring *tx_ring1;
+	struct b43_dmaring *tx_ring2;
+	struct b43_dmaring *tx_ring3;
+	struct b43_dmaring *tx_ring4;
+	struct b43_dmaring *tx_ring5;
+
+	struct b43_dmaring *rx_ring0;
+	struct b43_dmaring *rx_ring3;	/* only available on core.rev < 5 */
+};
+
+/* Data structures for PIO transmission, per 80211 core. */
+struct b43_pio {
+	struct b43_pioqueue *queue0;
+	struct b43_pioqueue *queue1;
+	struct b43_pioqueue *queue2;
+	struct b43_pioqueue *queue3;
+};
+
+/* Context information for a noise calculation (Link Quality). */
+struct b43_noise_calculation {
+	u8 channel_at_start;
+	bool calculation_running;
+	u8 nr_samples;
+	s8 samples[8][4];
+};
+
+struct b43_stats {
+	u8 link_noise;
+	/* Store the last TX/RX times here for updating the leds. */
+	unsigned long last_tx;
+	unsigned long last_rx;
+};
+
+struct b43_key {
+	/* If keyconf is NULL, this key is disabled.
+	 * keyconf is a cookie. Don't derefenrence it outside of the set_key
+	 * path, because b43 doesn't own it. */
+	struct ieee80211_key_conf *keyconf;
+	u8 algorithm;
+};
+
+struct b43_wldev;
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
+struct b43_wl {
+	/* Pointer to the active wireless device on this chip */
+	struct b43_wldev *current_dev;
+	/* Pointer to the ieee80211 hardware data structure */
+	struct ieee80211_hw *hw;
+
+	spinlock_t irq_lock;
+	struct mutex mutex;
+	spinlock_t leds_lock;
+
+	/* We can only have one operating interface (802.11 core)
+	 * at a time. General information about this interface follows.
+	 */
+
+	/* Opaque ID of the operating interface (!= monitor
+	 * interface) from the ieee80211 subsystem.
+	 * Do not modify.
+	 */
+	int if_id;
+	/* The MAC address of the operating interface. */
+	u8 mac_addr[ETH_ALEN];
+	/* Current BSSID */
+	u8 bssid[ETH_ALEN];
+	/* Interface type. (IEEE80211_IF_