Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (45 commits)
  regulator: missing index in PTR_ERR() in isl6271a_probe()
  regulator: Assign return value of mc13xxx_reg_rmw to ret
  regulator: Add initial per-regulator debugfs support
  regulator: Make regulator_has_full_constraints a bool
  regulator: Clean up logging a bit
  regulator: Optimise out noop voltage changes
  regulator: Add API to re-apply voltage to hardware
  regulator: Staticise non-exported functions in mc13892
  regulator: Only notify voltage changes when they succeed
  regulator: Provide a selector based set_voltage_sel() operation
  regulator: Factor out voltage set operation into a separate function
  regulator: Convert WM8994 to use get_voltage_sel()
  regulator: Convert WM835x to use get_voltage_sel()
  regulator: Allow modular build of mc13xxx-core
  regulator: support PMIC mc13892
  make mc13783 regulator code generic
  Change the register name definitions for mc13783
  mach-ux500: Updated and connected ab8500 regulator board configuration
  regulators: Removed macros for initialization of ab8500 regulators
  regulators: Added verbose debug messages to ab8500 regulators
  ...

45 files changed, 2960 insertions, 833 deletions

diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index f667a262dfc..505614803bc 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -254,10 +254,10 @@ static struct regulator_init_data cam_data = {
 
 static struct mc13783_regulator_init_data pcm038_regulators[] = {
 	{
-		.id = MC13783_REGU_VCAM,
+		.id = MC13783_REG_VCAM,
 		.init_data = &cam_data,
 	}, {
-		.id = MC13783_REGU_VMMC1,
+		.id = MC13783_REG_VMMC1,
 		.init_data = &sdhc1_data,
 	},
 };
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 4e516b49a90..899a969e92f 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -140,10 +140,10 @@ static struct regulator_init_data gpo_init = {
 
 static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 	{
-		.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
 		.init_data = &pwgtx_init,
 	}, {
-		.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+		.id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
 		.init_data = &pwgtx_init,
 	}, {
 
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 203d21a510a..1aa8d65fccb 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -216,11 +216,11 @@ static struct regulator_init_data cam_vreg_data = {
 
 static struct mc13783_regulator_init_data moboard_regulators[] = {
 	{
-		.id = MC13783_REGU_VMMC1,
+		.id = MC13783_REG_VMMC1,
 		.init_data = &sdhc_vreg_data,
 	},
 	{
-		.id = MC13783_REGU_VCAM,
+		.id = MC13783_REG_VCAM,
 		.init_data = &cam_vreg_data,
 	},
 };
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 1187f1fc2e5..533967c2d09 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -3,99 +3,94 @@
  *
  * License Terms: GNU General Public License v2
  *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com>
  *
  * MOP500 board specific initialization for regulators
  */
 #include <linux/kernel.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
 
-/* supplies to the display/camera */
-static struct regulator_init_data ab8500_vaux1_regulator = {
-	.constraints = {
-		.name = "V-DISPLAY",
-		.min_uV = 2500000,
-		.max_uV = 2900000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
-					REGULATOR_CHANGE_STATUS,
+/* AB8500 regulators */
+struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
+	/* supplies to the display/camera */
+	[AB8500_LDO_AUX1] = {
+		.constraints = {
+			.name = "V-DISPLAY",
+			.min_uV = 2500000,
+			.max_uV = 2900000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supplies to the on-board eMMC */
-static struct regulator_init_data ab8500_vaux2_regulator = {
-	.constraints = {
-		.name = "V-eMMC1",
-		.min_uV = 1100000,
-		.max_uV = 3300000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
-					REGULATOR_CHANGE_STATUS,
+	/* supplies to the on-board eMMC */
+	[AB8500_LDO_AUX2] = {
+		.constraints = {
+			.name = "V-eMMC1",
+			.min_uV = 1100000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for VAUX3, supplies to SDcard slots */
-static struct regulator_init_data ab8500_vaux3_regulator = {
-	.constraints = {
-		.name = "V-MMC-SD",
-		.min_uV = 1100000,
-		.max_uV = 3300000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
-					REGULATOR_CHANGE_STATUS,
+	/* supply for VAUX3, supplies to SDcard slots */
+	[AB8500_LDO_AUX3] = {
+		.constraints = {
+			.name = "V-MMC-SD",
+			.min_uV = 1100000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for tvout, gpadc, TVOUT LDO */
-static struct regulator_init_data ab8500_vtvout_init = {
-	.constraints = {
-		.name = "V-TVOUT",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	/* supply for tvout, gpadc, TVOUT LDO */
+	[AB8500_LDO_TVOUT] = {
+		.constraints = {
+			.name = "V-TVOUT",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for ab8500-vaudio, VAUDIO LDO */
-static struct regulator_init_data ab8500_vaudio_init = {
-	.constraints = {
-		.name = "V-AUD",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	/* supply for ab8500-vaudio, VAUDIO LDO */
+	[AB8500_LDO_AUDIO] = {
+		.constraints = {
+			.name = "V-AUD",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for v-anamic1 VAMic1-LDO */
-static struct regulator_init_data ab8500_vamic1_init = {
-	.constraints = {
-		.name = "V-AMIC1",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	/* supply for v-anamic1 VAMic1-LDO */
+	[AB8500_LDO_ANAMIC1] = {
+		.constraints = {
+			.name = "V-AMIC1",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
-static struct regulator_init_data ab8500_vamic2_init = {
-	.constraints = {
-		.name = "V-AMIC2",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+	[AB8500_LDO_ANAMIC2] = {
+		.constraints = {
+			.name = "V-AMIC2",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for v-dmic, VDMIC LDO */
-static struct regulator_init_data ab8500_vdmic_init = {
-	.constraints = {
-		.name = "V-DMIC",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	/* supply for v-dmic, VDMIC LDO */
+	[AB8500_LDO_DMIC] = {
+		.constraints = {
+			.name = "V-DMIC",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for v-intcore12, VINTCORE12 LDO */
-static struct regulator_init_data ab8500_vintcore_init = {
-	.constraints = {
-		.name = "V-INTCORE",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	/* supply for v-intcore12, VINTCORE12 LDO */
+	[AB8500_LDO_INTCORE] = {
+		.constraints = {
+			.name = "V-INTCORE",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
 	},
-};
-
-/* supply for U8500 CSI/DSI, VANA LDO */
-static struct regulator_init_data ab8500_vana_init = {
-	.constraints = {
-		.name = "V-CSI/DSI",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	/* supply for U8500 CSI/DSI, VANA LDO */
+	[AB8500_LDO_ANA] = {
+		.constraints = {
+			.name = "V-CSI/DSI",
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		},
 	},
 };
-
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
new file mode 100644
index 00000000000..2675fae5253
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * MOP500 board specific initialization for regulators
+ */
+
+#ifndef __BOARD_MOP500_REGULATORS_H
+#define __BOARD_MOP500_REGULATORS_H
+
+#include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
+
+extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
+
+#endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a1c9ea1a66d..a393f57ed2a 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -35,6 +35,7 @@
 #include "devices-db8500.h"
 #include "pins-db8500.h"
 #include "board-mop500.h"
+#include "board-mop500-regulators.h"
 
 static pin_cfg_t mop500_pins[] = {
 	/* SSP0 */
@@ -80,6 +81,8 @@ static pin_cfg_t mop500_pins[] = {
 
 static struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
+	.regulator	= ab8500_regulators,
+	.num_regulator	= ARRAY_SIZE(ab8500_regulators),
 };
 
 static struct resource ab8500_resources[] = {
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 2ce2eb71d0f..dd6308499bd 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -249,7 +249,7 @@ static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
 }
 
 static int pm8607_set_voltage(struct regulator_dev *rdev,
-			      int min_uV, int max_uV)
+			      int min_uV, int max_uV, unsigned *selector)
 {
 	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
 	uint8_t val, mask;
@@ -263,6 +263,7 @@ static int pm8607_set_voltage(struct regulator_dev *rdev,
 	ret = choose_voltage(rdev, min_uV, max_uV);
 	if (ret < 0)
 		return -EINVAL;
+	*selector = ret;
 	val = (uint8_t)(ret << info->vol_shift);
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
 
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index dd30e883d4a..e1d943619ab 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -186,13 +186,25 @@ config REGULATOR_PCAP
 	 This driver provides support for the voltage regulators of the
 	 PCAP2 PMIC.
 
+config REGULATOR_MC13XXX_CORE
+	tristate
+
 config REGULATOR_MC13783
 	tristate "Support regulators on Freescale MC13783 PMIC"
 	depends on MFD_MC13783
+	select REGULATOR_MC13XXX_CORE
 	help
 	  Say y here to support the regulators found on the Freescale MC13783
 	  PMIC.
 
+config REGULATOR_MC13892
+	tristate "Support regulators on Freescale MC13892 PMIC"
+	depends on MFD_MC13XXX
+	select REGULATOR_MC13XXX_CORE
+	help
+	  Say y here to support the regulators found on the Freescale MC13892
+	  PMIC.
+
 config REGULATOR_AB3100
 	tristate "ST-Ericsson AB3100 Regulator functions"
 	depends on AB3100_CORE
@@ -250,5 +262,15 @@ config REGULATOR_TPS6586X
 	help
 	  This driver supports TPS6586X voltage regulator chips.
 
+config REGULATOR_TPS6524X
+	tristate "TI TPS6524X Power regulators"
+	depends on SPI
+	help
+	  This driver supports TPS6524X voltage regulator chips. TPS6524X
+	  provides three step-down converters and two general-purpose LDO
+	  voltage regulators.  This device is interfaced using a customized
+	  serial interface currently supported on the sequencer serial
+	  port controller.
+
 endif
 
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index bff81573678..0b5e88c2b8d 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,10 +30,13 @@ obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
+obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
+obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index b349266a43d..ed6feaf9398 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -362,7 +362,8 @@ static int ab3100_get_best_voltage_index(struct regulator_dev *reg,
 }
 
 static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
-					int min_uV, int max_uV)
+					int min_uV, int max_uV,
+					unsigned *selector)
 {
 	struct ab3100_regulator *abreg = reg->reg_data;
 	u8 regval;
@@ -373,6 +374,8 @@ static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
 	if (bestindex < 0)
 		return bestindex;
 
+	*selector = bestindex;
+
 	err = abx500_get_register_interruptible(abreg->dev, 0,
 						abreg->regreg, &regval);
 	if (err) {
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index db6b70f2051..d9a052c53ae 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -3,18 +3,13 @@
  *
  * License Terms: GNU General Public License v2
  *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
  *
  * AB8500 peripheral regulators
  *
- * AB8500 supports the following regulators,
- * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
- *        VAUX1/2/3, VANA
- *
- * for DB8500 cut 1.0 and previous versions of the silicon, all accesses
- * to registers are through the DB8500 SPI. In cut 1.1 onwards, these
- * accesses are through the DB8500 PRCMU I2C
- *
+ * AB8500 supports the following regulators:
+ *   VAUX1/2/3, VINTCORE, VTVOUT, VAUDIO, VAMIC1/2, VDMIC, VANA
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -28,38 +23,37 @@
 
 /**
  * struct ab8500_regulator_info - ab8500 regulator information
+ * @dev: device pointer
  * @desc: regulator description
- * @ab8500: ab8500 parent
  * @regulator_dev: regulator device
  * @max_uV: maximum voltage (for variable voltage supplies)
  * @min_uV: minimum voltage (for variable voltage supplies)
  * @fixed_uV: typical voltage (for fixed voltage supplies)
  * @update_bank: bank to control on/off
  * @update_reg: register to control on/off
- * @mask: mask to enable/disable regulator
- * @enable: bits to enable the regulator in normal(high power) mode
+ * @update_mask: mask to enable/disable regulator
+ * @update_val_enable: bits to enable the regulator in normal (high power) mode
  * @voltage_bank: bank to control regulator voltage
  * @voltage_reg: register to control regulator voltage
  * @voltage_mask: mask to control regulator voltage
- * @supported_voltages: supported voltage table
+ * @voltages: supported voltage table
  * @voltages_len: number of supported voltages for the regulator
  */
 struct ab8500_regulator_info {
 	struct device		*dev;
 	struct regulator_desc	desc;
-	struct ab8500		*ab8500;
 	struct regulator_dev	*regulator;
 	int max_uV;
 	int min_uV;
 	int fixed_uV;
 	u8 update_bank;
 	u8 update_reg;
-	u8 mask;
-	u8 enable;
+	u8 update_mask;
+	u8 update_val_enable;
 	u8 voltage_bank;
 	u8 voltage_reg;
 	u8 voltage_mask;
-	int const *supported_voltages;
+	int const *voltages;
 	int voltages_len;
 };
 
@@ -83,6 +77,17 @@ static const int ldo_vauxn_voltages[] = {
 	3300000,
 };
 
+static const int ldo_vaux3_voltages[] = {
+	1200000,
+	1500000,
+	1800000,
+	2100000,
+	2500000,
+	2750000,
+	2790000,
+	2910000,
+};
+
 static const int ldo_vintcore_voltages[] = {
 	1200000,
 	1225000,
@@ -95,57 +100,80 @@ static const int ldo_vintcore_voltages[] = {
 
 static int ab8500_regulator_enable(struct regulator_dev *rdev)
 {
-	int regulator_id, ret;
+	int ret;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= AB8500_NUM_REGULATORS)
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 		return -EINVAL;
+	}
 
 	ret = abx500_mask_and_set_register_interruptible(info->dev,
-		info->update_bank, info->update_reg, info->mask, info->enable);
+		info->update_bank, info->update_reg,
+		info->update_mask, info->update_val_enable);
 	if (ret < 0)
 		dev_err(rdev_get_dev(rdev),
 			"couldn't set enable bits for regulator\n");
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, info->update_val_enable);
+
 	return ret;
 }
 
 static int ab8500_regulator_disable(struct regulator_dev *rdev)
 {
-	int regulator_id, ret;
+	int ret;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= AB8500_NUM_REGULATORS)
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 		return -EINVAL;
+	}
 
 	ret = abx500_mask_and_set_register_interruptible(info->dev,
-		info->update_bank, info->update_reg, info->mask, 0x0);
+		info->update_bank, info->update_reg,
+		info->update_mask, 0x0);
 	if (ret < 0)
 		dev_err(rdev_get_dev(rdev),
 			"couldn't set disable bits for regulator\n");
+
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, 0x0);
+
 	return ret;
 }
 
 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 {
-	int regulator_id, ret;
+	int ret;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-	u8 value;
+	u8 regval;
 
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= AB8500_NUM_REGULATORS)
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 		return -EINVAL;
+	}
 
 	ret = abx500_get_register_interruptible(info->dev,
-		info->update_bank, info->update_reg, &value);
+		info->update_bank, info->update_reg, &regval);
 	if (ret < 0) {
 		dev_err(rdev_get_dev(rdev),
 			"couldn't read 0x%x register\n", info->update_reg);
 		return ret;
 	}
 
-	if (value & info->mask)
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+		" 0x%x\n",
+		info->desc.name, info->update_bank, info->update_reg,
+		info->update_mask, regval);
+
+	if (regval & info->update_mask)
 		return true;
 	else
 		return false;
@@ -153,12 +181,12 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
 
 static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 {
-	int regulator_id;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= AB8500_NUM_REGULATORS)
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 		return -EINVAL;
+	}
 
 	/* return the uV for the fixed regulators */
 	if (info->fixed_uV)
@@ -167,33 +195,40 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 	if (selector >= info->voltages_len)
 		return -EINVAL;
 
-	return info->supported_voltages[selector];
+	return info->voltages[selector];
 }
 
 static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
 {
-	int regulator_id, ret;
+	int ret, val;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-	u8 value;
+	u8 regval;
 
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= AB8500_NUM_REGULATORS)
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 		return -EINVAL;
+	}
 
-	ret = abx500_get_register_interruptible(info->dev, info->voltage_bank,
-		info->voltage_reg, &value);
+	ret = abx500_get_register_interruptible(info->dev,
+			info->voltage_bank, info->voltage_reg, &regval);
 	if (ret < 0) {
 		dev_err(rdev_get_dev(rdev),
 			"couldn't read voltage reg for regulator\n");
 		return ret;
 	}
 
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+		" 0x%x\n",
+		info->desc.name, info->voltage_bank, info->voltage_reg,
+		info->voltage_mask, regval);
+
 	/* vintcore has a different layout */
-	value &= info->voltage_mask;
-	if (regulator_id == AB8500_LDO_INTCORE)
-		ret = info->supported_voltages[value >> 0x3];
+	val = regval & info->voltage_mask;
+	if (info->desc.id == AB8500_LDO_INTCORE)
+		ret = info->voltages[val >> 0x3];
 	else
-		ret = info->supported_voltages[value];
+		ret = info->voltages[val];
 
 	return ret;
 }
@@ -206,8 +241,8 @@ static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
 
 	/* check the supported voltage */
 	for (i = 0; i < info->voltages_len; i++) {
-		if ((info->supported_voltages[i] >= min_uV) &&
-		    (info->supported_voltages[i] <= max_uV))
+		if ((info->voltages[i] >= min_uV) &&
+		    (info->voltages[i] <= max_uV))
 			return i;
 	}
 
@@ -215,14 +250,17 @@ static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
 }
 
 static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
-		int min_uV, int max_uV)
+					int min_uV, int max_uV,
+					unsigned *selector)
 {
-	int regulator_id, ret;
+	int ret;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+	u8 regval;
 
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= AB8500_NUM_REGULATORS)
+	if (info == NULL) {
+		dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
 		return -EINVAL;
+	}
 
 	/* get the appropriate voltages within the range */
 	ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
@@ -232,14 +270,23 @@ static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
 		return ret;
 	}
 
+	*selector = ret;
+
 	/* set the registers for the request */
+	regval = (u8)ret;
 	ret = abx500_mask_and_set_register_interruptible(info->dev,
-		info->voltage_bank, info->voltage_reg,
-		info->voltage_mask, (u8)ret);
+			info->voltage_bank, info->voltage_reg,
+			info->voltage_mask, regval);
 	if (ret < 0)
 		dev_err(rdev_get_dev(rdev),
 		"couldn't set voltage reg for regulator\n");
 
+	dev_vdbg(rdev_get_dev(rdev),
+		"%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
+		" 0x%x\n",
+		info->desc.name, info->voltage_bank, info->voltage_reg,
+		info->voltage_mask, regval);
+
 	return ret;