Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Pull MFD updates from Lee Jones: "Changes to existing drivers: - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm - regmap use of and/or clean-up: tps65090, twl6040 - basic renaming: max14577 - use new cpufreq helpers: db8500-prcmu - increase regulator support: stmpe, arizona, wm5102 - reduce legacy GPIO overhead: stmpe - provide necessary remove path: bcm590xx - expand sysfs presence: kempld - move driver specific code out to drivers: rtc-s5m, arizona - clk handling: twl6040 - use managed (devm_*) resources: ipaq-micro - clean-up/remove unused/duplicated code: tps65218, sec, pm8921, abx500-core, db8500-prcmu, menelaus - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon, cros_ec_spi - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686, max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu, max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host, ipaq-micro Support for new devices: - add support for max77836 into max14577 - add support for tps658640 into tps6586x - add support for cros-ec-i2c-tunnel into cros_ec - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms - add new driver for axp20x - add new driver for sun6i-prcm - add new driver for ipaq-micro" * tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits) mfd: wm5102: Correct default for LDO Control 2 register mfd: menelaus: Use module_i2c_driver mfd: tps65218: Terminate of match table mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG mfd: ti-keystone-devctrl: Add bindings for device state control mfd: palmas: Format the header file mfd: abx500-core: Remove unused function abx500_dump_all_banks() mfd: arizona: Correct addresses of always-on trigger registers mfd: max14577: Cast to architecture agnostic data type i2c: ChromeOS EC tunnel driver mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable mfd: cros_ec: spi: Add mutex to cros_ec_spi mfd: cros_ec: spi: Calculate delay between transfers correctly mfd: arizona: Correct error message for addition of main IRQ chip mfd: wm8997: Add registers for high power mode mfd: arizona: Add MICVDD to mapped regulators mfd: ipaq-micro: Make mfd_cell array const mfd: ipaq-micro: Use devm_ioremap_resource() ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2014-06-06 12:08:39 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2014-06-06 12:08:39 -0700
commit: 1fe9eb184721132c7254d76d9ef31c96edad8870 (patch)
tree: c055ffb7f201bc2370714ebe186a922d0eb39d0d
parent: 0bb464624140bfdd8389d4c5464ba134b2856049 (diff)
parent: 89abd4df28c6f85645e32f37ffab6426f800e4a1 (diff)
76 files changed, 6641 insertions, 1673 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
new file mode 100644
index 00000000000..898f030eba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-cros-ec-tunnel.txt
@@ -0,0 +1,39 @@
+I2C bus that tunnels through the ChromeOS EC (cros-ec)
+======================================================
+On some ChromeOS board designs we've got a connection to the EC (embedded
+controller) but no direct connection to some devices on the other side of
+the EC (like a battery and PMIC).  To get access to those devices we need
+to tunnel our i2c commands through the EC.
+
+The node for this device should be under a cros-ec node like google,cros-ec-spi
+or google,cros-ec-i2c.
+
+
+Required properties:
+- compatible: google,cros-ec-i2c-tunnel
+- google,remote-bus: The EC bus we'd like to talk to.
+
+Optional child nodes:
+- One node per I2C device connected to the tunnelled I2C bus.
+
+
+Example:
+	cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+
+		...
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+		};
+	}
diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
new file mode 100644
index 00000000000..1f5a31fef90
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -0,0 +1,59 @@
+* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device
+
+PRCM is an MFD device exposing several Power Management related devices
+(like clks and reset controllers).
+
+Required properties:
+ - compatible: "allwinner,sun6i-a31-prcm"
+ - reg: The PRCM registers range
+
+The prcm node may contain several subdevices definitions:
+ - see Documentation/devicetree/clk/sunxi.txt for clock devices
+ - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+   controller devices
+
+
+Example:
+
+	prcm: prcm@01f01400 {
+		compatible = "allwinner,sun6i-a31-prcm";
+		reg = <0x01f01400 0x200>;
+
+		/* Put subdevices here */
+		ar100: ar100_clk {
+			compatible = "allwinner,sun6i-a31-ar100-clk";
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+		};
+
+		ahb0: ahb0_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&ar100_div>;
+			clock-output-names = "ahb0";
+		};
+
+		apb0: apb0_clk {
+			compatible = "allwinner,sun6i-a31-apb0-clk";
+			#clock-cells = <0>;
+			clocks = <&ahb0>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: apb0_gates_clk {
+			compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+			#clock-cells = <1>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_pio", "apb0_ir",
+					"apb0_timer01", "apb0_p2wi",
+					"apb0_uart", "apb0_1wire",
+					"apb0_i2c";
+		};
+
+		apb0_rst: apb0_rst {
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
new file mode 100644
index 00000000000..20963c76b4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Texas Instruments keystone device state control
+
+The Keystone II devices have a set of registers that are used to control
+the status of its peripherals. This node is intended to allow access to
+this functionality.
+
+Required properties:
+
+- compatible:		"ti,keystone-devctrl", "syscon"
+
+- reg:			contains offset/length value for device state control
+			registers space.
+
+Example:
+
+devctrl: device-state-control@0x02620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
index 0f5dd709d75..a41157b5d93 100644
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -19,6 +19,8 @@ Required properties:
 
 Optional properties, nodes:
 - enable-active-high: To power on the twl6040 during boot.
+- clocks: phandle to the clk32k clock provider
+- clock-names: Must be "clk32k"
 
 Vibra functionality
 Required properties:
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index 2776a09bee5..628b5849429 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -23,7 +23,8 @@
 enum { REG_RE, REG_FE, REG_IE };
 
 #define CACHE_NR_REGS	3
-#define CACHE_NR_BANKS	(STMPE_NR_GPIOS / 8)
+/* No variant has more than 24 GPIOs */
+#define CACHE_NR_BANKS	(24 / 8)
 
 struct stmpe_gpio {
 	struct gpio_chip chip;
@@ -31,8 +32,6 @@ struct stmpe_gpio {
 	struct device *dev;
 	struct mutex irq_lock;
 	struct irq_domain *domain;
-
-	int irq_base;
 	unsigned norequest_mask;
 
 	/* Caches of interrupt control registers for bus_lock */
@@ -311,13 +310,8 @@ static const struct irq_domain_ops stmpe_gpio_irq_simple_ops = {
 static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio,
 		struct device_node *np)
 {
-	int base = 0;
-
-	if (!np)
-		base = stmpe_gpio->irq_base;
-
 	stmpe_gpio->domain = irq_domain_add_simple(np,
-				stmpe_gpio->chip.ngpio, base,
+				stmpe_gpio->chip.ngpio, 0,
 				&stmpe_gpio_irq_simple_ops, stmpe_gpio);
 	if (!stmpe_gpio->domain) {
 		dev_err(stmpe_gpio->dev, "failed to create irqdomain\n");
@@ -354,7 +348,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 #ifdef CONFIG_OF
 	stmpe_gpio->chip.of_node = np;
 #endif
-	stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
+	stmpe_gpio->chip.base = -1;
 
 	if (pdata)
 		stmpe_gpio->norequest_mask = pdata->norequest_mask;
@@ -362,9 +356,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 		of_property_read_u32(np, "st,norequest-mask",
 				&stmpe_gpio->norequest_mask);
 
-	if (irq >= 0)
-		stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
-	else
+	if (irq < 0)
 		dev_info(&pdev->dev,
 			"device configured in no-irq mode; "
 			"irqs are not available\n");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c94db1c5e35..9a0a6cc7f4b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -993,6 +993,15 @@ config I2C_SIBYTE
 	help
 	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
 
+config I2C_CROS_EC_TUNNEL
+	tristate "ChromeOS EC tunnel I2C bus"
+	depends on MFD_CROS_EC
+	help
+	  If you say yes here you get an I2C bus that will tunnel i2c commands
+	  through to the other side of the ChromeOS EC to the i2c bus
+	  connected there. This will work whatever the interface used to
+	  talk to the EC (SPI, I2C or LPC).
+
 config SCx200_I2C
 	tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
 	depends on SCx200_GPIO
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 18d18ff9db9..e110ca93291 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_VIPERBOARD)	+= i2c-viperboard.o
 # Other I2C/SMBus bus drivers
 obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
 obj-$(CONFIG_I2C_BCM_KONA)	+= i2c-bcm-kona.o
+obj-$(CONFIG_I2C_CROS_EC_TUNNEL)	+= i2c-cros-ec-tunnel.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
 obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
new file mode 100644
index 00000000000..8e7a71487bb
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -0,0 +1,318 @@
+/*
+ *  Copyright (C) 2013 Google, Inc
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ * Expose an I2C passthrough to the ChromeOS EC.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/**
+ * struct ec_i2c_device - Driver data for I2C tunnel
+ *
+ * @dev: Device node
+ * @adap: I2C adapter
+ * @ec: Pointer to EC device
+ * @remote_bus: The EC bus number we tunnel to on the other side.
+ * @request_buf: Buffer for transmitting data; we expect most transfers to fit.
+ * @response_buf: Buffer for receiving data; we expect most transfers to fit.
+ */
+
+struct ec_i2c_device {
+	struct device *dev;
+	struct i2c_adapter adap;
+	struct cros_ec_device *ec;
+
+	u16 remote_bus;
+
+	u8 request_buf[256];
+	u8 response_buf[256];
+};
+
+/**
+ * ec_i2c_count_message - Count bytes needed for ec_i2c_construct_message
+ *
+ * @i2c_msgs: The i2c messages to read
+ * @num: The number of i2c messages.
+ *
+ * Returns the number of bytes the messages will take up.
+ */
+static int ec_i2c_count_message(const struct i2c_msg i2c_msgs[], int num)
+{
+	int i;
+	int size;
+
+	size = sizeof(struct ec_params_i2c_passthru);
+	size += num * sizeof(struct ec_params_i2c_passthru_msg);
+	for (i = 0; i < num; i++)
+		if (!(i2c_msgs[i].flags & I2C_M_RD))
+			size += i2c_msgs[i].len;
+
+	return size;
+}
+
+/**
+ * ec_i2c_construct_message - construct a message to go to the EC
+ *
+ * This function effectively stuffs the standard i2c_msg format of Linux into
+ * a format that the EC understands.
+ *
+ * @buf: The buffer to fill.  We assume that the buffer is big enough.
+ * @i2c_msgs: The i2c messages to read.
+ * @num: The number of i2c messages.
+ * @bus_num: The remote bus number we want to talk to.
+ *
+ * Returns 0 or a negative error number.
+ */
+static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[],
+				    int num, u16 bus_num)
+{
+	struct ec_params_i2c_passthru *params;
+	u8 *out_data;
+	int i;
+
+	out_data = buf + sizeof(struct ec_params_i2c_passthru) +
+		   num * sizeof(struct ec_params_i2c_passthru_msg);
+
+	params = (struct ec_params_i2c_passthru *)buf;
+	params->port = bus_num;
+	params->num_msgs = num;
+	for (i = 0; i < num; i++) {
+		const struct i2c_msg *i2c_msg = &i2c_msgs[i];
+		struct ec_params_i2c_passthru_msg *msg = &params->msg[i];
+
+		msg->len = i2c_msg->len;
+		msg->addr_flags = i2c_msg->addr;
+
+		if (i2c_msg->flags & I2C_M_TEN)
+			msg->addr_flags |= EC_I2C_FLAG_10BIT;
+
+		if (i2c_msg->flags & I2C_M_RD) {
+			msg->addr_flags |= EC_I2C_FLAG_READ;
+		} else {
+			memcpy(out_data, i2c_msg->buf, msg->len);
+			out_data += msg->len;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ec_i2c_count_response - Count bytes needed for ec_i2c_parse_response
+ *
+ * @i2c_msgs: The i2c messages to to fill up.
+ * @num: The number of i2c messages expected.
+ *
+ * Returns the number of response bytes expeced.
+ */
+static int ec_i2c_count_response(struct i2c_msg i2c_msgs[], int num)
+{
+	int size;
+	int i;
+
+	size = sizeof(struct ec_response_i2c_passthru);
+	for (i = 0; i < num; i++)
+		if (i2c_msgs[i].flags & I2C_M_RD)
+			size += i2c_msgs[i].len;
+
+	return size;
+}
+
+/**
+ * ec_i2c_parse_response - Parse a response from the EC
+ *
+ * We'll take the EC's response and copy it back into msgs.
+ *
+ * @buf: The buffer to parse.
+ * @i2c_msgs: The i2c messages to to fill up.
+ * @num: The number of i2c messages; will be modified to include the actual
+ *	 number received.
+ *
+ * Returns 0 or a negative error number.
+ */
+static int ec_i2c_parse_response(const u8 *buf, struct i2c_msg i2c_msgs[],
+				 int *num)
+{
+	const struct ec_response_i2c_passthru *resp;
+	const u8 *in_data;
+	int i;
+
+	in_data = buf + sizeof(struct ec_response_i2c_passthru);
+
+	resp = (const struct ec_response_i2c_passthru *)buf;
+	if (resp->i2c_status & EC_I2C_STATUS_TIMEOUT)
+		return -ETIMEDOUT;
+	else if (resp->i2c_status & EC_I2C_STATUS_ERROR)
+		return -EREMOTEIO;
+
+	/* Other side could send us back fewer messages, but not more */
+	if (resp->num_msgs > *num)
+		return -EPROTO;
+	*num = resp->num_msgs;
+
+	for (i = 0; i < *num; i++) {
+		struct i2c_msg *i2c_msg = &i2c_msgs[i];
+
+		if (i2c_msgs[i].flags & I2C_M_RD) {
+			memcpy(i2c_msg->buf, in_data, i2c_msg->len);
+			in_data += i2c_msg->len;
+		}
+	}
+
+	return 0;
+}
+
+static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
+		       int num)
+{
+	struct ec_i2c_device *bus = adap->algo_data;
+	struct device *dev = bus->dev;
+	const u16 bus_num = bus->remote_bus;
+	int request_len;
+	int response_len;
+	u8 *request = NULL;
+	u8 *response = NULL;
+	int result;
+
+	request_len = ec_i2c_count_message(i2c_msgs, num);
+	if (request_len < 0) {
+		dev_warn(dev, "Error constructing message %d\n", request_len);
+		result = request_len;
+		goto exit;
+	}
+	response_len = ec_i2c_count_response(i2c_msgs, num);
+	if (response_len < 0) {
+		/* Unexpected; no errors should come when NULL response */
+		dev_warn(dev, "Error preparing response %d\n", response_len);
+		result = response_len;
+		goto exit;
+	}
+
+	if (request_len <= ARRAY_SIZE(bus->request_buf)) {
+		request = bus->request_buf;
+	} else {
+		request = kzalloc(request_len, GFP_KERNEL);
+		if (request == NULL) {
+			result = -ENOMEM;
+			goto exit;
+		}
+	}
+	if (response_len <= ARRAY_SIZE(bus->response_buf)) {
+		response = bus->response_buf;
+	} else {
+		response = kzalloc(response_len, GFP_KERNEL);
+		if (response == NULL) {
+			result = -ENOMEM;
+			goto exit;
+		}
+	}
+
+	ec_i2c_construct_message(request, i2c_msgs, num, bus_num);
+	result = bus->ec->command_sendrecv(bus->ec, EC_CMD_I2C_PASSTHRU,
+					   request, request_len,
+					   response, response_len);
+	if (result)
+		goto exit;
+
+	result = ec_i2c_parse_response(response, i2c_msgs, &num);
+	if (result < 0)
+		goto exit;
+
+	/* Indicate success by saying how many messages were sent */
+	result = num;
+exit:
+	if (request != bus->request_buf)
+		kfree(request);
+	if (response != bus->response_buf)
+		kfree(response);
+
+	return result;
+}
+
+static u32 ec_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm ec_i2c_algorithm = {
+	.master_xfer	= ec_i2c_xfer,
+	.functionality	= ec_i2c_functionality,
+};
+
+static int ec_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct ec_i2c_device *bus = NULL;
+	u32 remote_bus;
+	int err;
+
+	if (!ec->command_sendrecv) {
+		dev_err(dev, "Missing sendrecv\n");
+		return -EINVAL;
+	}
+
+	bus = devm_kzalloc(dev, sizeof(*bus), GFP_KERNEL);
+	if (bus == NULL)
+		return -ENOMEM;
+
+	err = of_property_read_u32(np, "google,remote-bus", &remote_bus);
+	if (err) {
+		dev_err(dev, "Couldn't read remote-bus property\n");
+		return err;
+	}
+	bus->remote_bus = remote_bus;
+
+	bus->ec = ec;
+	bus->dev = dev;
+
+	bus->adap.owner = THIS_MODULE;
+	strlcpy(bus->adap.name, "cros-ec-i2c-tunnel", sizeof(bus->adap.name));
+	bus->adap.algo = &ec_i2c_algorithm;
+	bus->adap.algo_data = bus;
+	bus->adap.dev.parent = &pdev->dev;
+	bus->adap.dev.of_node = np;
+
+	err = i2c_add_adapter(&bus->adap);
+	if (err) {
+		dev_err(dev, "cannot register i2c adapter\n");
+		return err;
+	}
+	platform_set_drvdata(pdev, bus);
+
+	return err;
+}
+
+static int ec_i2c_remove(struct platform_device *dev)
+{
+	struct ec_i2c_device *bus = platform_get_drvdata(dev);
+
+	i2c_del_adapter(&bus->adap);
+
+	return 0;
+}
+
+static struct platform_driver ec_i2c_tunnel_driver = {
+	.probe = ec_i2c_probe,
+	.remove = ec_i2c_remove,
+	.driver = {
+		.name = "cros-ec-i2c-tunnel",
+	},
+};
+
+module_platform_driver(ec_i2c_tunnel_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("EC I2C tunnel driver");
+MODULE_ALIAS("platform:cros-ec-i2c-tunnel");
diff --git a/drivers/memstick/host/Kconfig b/drivers/memstick/host/Kconfig
index 1b37cf8cd20..7310e32b599 100644
--- a/drivers/memstick/host/Kconfig
+++ b/drivers/memstick/host/Kconfig
@@ -52,3 +52,13 @@ config MEMSTICK_REALTEK_PCI
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called rtsx_pci_ms.
+
+config MEMSTICK_REALTEK_USB
+	tristate "Realtek USB Memstick Card Interface Driver"
+	depends on MFD_RTSX_USB
+	help
+	  Say Y here to include driver code to support Memstick card interface
+	  of Realtek RTS5129/39 series USB card reader
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called rts5139_ms.
diff --git a/drivers/memstick/host/Makefile b/drivers/memstick/host/Makefile
index af3459d7686..491c9557441 100644
--- a/drivers/memstick/host/Makefile
+++ b/drivers/memstick/host/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_MEMSTICK_TIFM_MS)		+= tifm_ms.o
 obj-$(CONFIG_MEMSTICK_JMICRON_38X)	+= jmb38x_ms.o
 obj-$(CONFIG_MEMSTICK_R592)		+= r592.o
 obj-$(CONFIG_MEMSTICK_REALTEK_PCI)	+= rtsx_pci_ms.o
+obj-$(CONFIG_MEMSTICK_REALTEK_USB)	+= rtsx_usb_ms.o
diff --git a/drivers/memstick/host/rtsx_usb_ms.c b/drivers/memstick/host/rtsx_usb_ms.c
new file mode 100644
index 00000000000..a7282b7d4de
--- /dev/null
+++ b/drivers/memstick/host/rtsx_usb_ms.c
@@ -0,0 +1,839 @@
+/* Realtek USB Memstick Card Interface driver
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Roger Tseng <rogerable@realtek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/memstick.h>
+#include <linux/kthread.h>
+#include <linux/mfd/rtsx_usb.h>
+#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/completion.h>
+#include <asm/unaligned.h>
+
+struct rtsx_usb_ms {
+	struct platform_device	*pdev;
+	struct rtsx_ucr	*ucr;
+	struct memstick_host	*msh;
+	struct memstick_request	*req;
+
+	struct mutex		host_mutex;
+	struct work_struct	handle_req;
+
+	struct task_struct	*detect_ms;
+	struct completion	detect_ms_exit;
+
+	u8			ssc_depth;
+	unsigned int		clock;
+	int			power_mode;
+	unsigned char           ifmode;
+	bool			eject;
+};
+
+static inline struct device *ms_dev(struct rtsx_usb_ms *host)
+{
+	return &(host->pdev->dev);
+}
+
+static inline void ms_clear_error(struct rtsx_usb_ms *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	rtsx_usb_ep0_write_register(ucr, CARD_STOP,
+				  MS_STOP | MS_CLR_ERR,
+				  MS_STOP | MS_CLR_ERR);
+
+	rtsx_usb_clear_dma_err(ucr);
+	rtsx_usb_clear_fsm_err(ucr);
+}
+
+#ifdef DEBUG
+
+static void ms_print_debug_regs(struct rtsx_usb_ms *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	u16 i;
+	u8 *ptr;
+
+	/* Print MS host internal registers */
+	rtsx_usb_init_cmd(ucr);
+
+	/* MS_CFG to MS_INT_REG */
+	for (i = 0xFD40; i <= 0xFD44; i++)
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0);
+
+	/* CARD_SHARE_MODE to CARD_GPIO */
+	for (i = 0xFD51; i <= 0xFD56; i++)
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0);
+
+	/* CARD_PULL_CTLx */
+	for (i = 0xFD60; i <= 0xFD65; i++)
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, i, 0, 0);
+
+	/* CARD_DATA_SOURCE, CARD_SELECT, CARD_CLK_EN, CARD_PWR_CTL */
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_DATA_SOURCE, 0, 0);
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_SELECT, 0, 0);
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_CLK_EN, 0, 0);
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, CARD_PWR_CTL, 0, 0);
+
+	rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+	rtsx_usb_get_rsp(ucr, 21, 100);
+
+	ptr = ucr->rsp_buf;
+	for (i = 0xFD40; i <= 0xFD44; i++)
+		dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+	for (i = 0xFD51; i <= 0xFD56; i++)
+		dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+	for (i = 0xFD60; i <= 0xFD65; i++)
+		dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", i, *(ptr++));
+
+	dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_DATA_SOURCE, *(ptr++));
+	dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_SELECT, *(ptr++));
+	dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_CLK_EN, *(ptr++));
+	dev_dbg(ms_dev(host), "0x%04X: 0x%02x\n", CARD_PWR_CTL, *(ptr++));
+}
+
+#else
+
+static void ms_print_debug_regs(struct rtsx_usb_ms *host)
+{
+}
+
+#endif
+
+static int ms_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_pull_ctl_disable_qfn24(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x56);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_pull_ctl_enable_lqfp48(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_pull_ctl_enable_qfn24(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_power_on(struct rtsx_usb_ms *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+
+	dev_dbg(ms_dev(host), "%s\n", __func__);
+
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SELECT, 0x07, MS_MOD_SEL);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SHARE_MODE,
+			CARD_SHARE_MASK, CARD_SHARE_MS);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN,
+			MS_CLK_EN, MS_CLK_EN);
+	err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+	if (err < 0)
+		return err;
+
+	if (CHECK_PKG(ucr, LQFP48))
+		err = ms_pull_ctl_enable_lqfp48(ucr);
+	else
+		err = ms_pull_ctl_enable_qfn24(ucr);
+	if (err < 0)
+		return err;
+
+	err = rtsx_usb_write_register(ucr, CARD_PWR_CTL,
+			POWER_MASK, PARTIAL_POWER_ON);
+	if (err)
+		return err;
+
+	usleep_range(800, 1000);
+
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+			POWER_MASK, POWER_ON);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE,
+			MS_OUTPUT_EN, MS_OUTPUT_EN);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int ms_power_off(struct rtsx_usb_ms *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+
+	dev_dbg(ms_dev(host), "%s\n", __func__);
+
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, MS_CLK_EN, 0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, MS_OUTPUT_EN, 0);
+
+	err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+	if (err < 0)
+		return err;
+
+	if (CHECK_PKG(ucr, LQFP48))
+		return ms_pull_ctl_disable_lqfp48(ucr);
+
+	return ms_pull_ctl_disable_qfn24(ucr);
+}
+
+static int ms_transfer_data(struct rtsx_usb_ms *host, unsigned char data_dir,
+		u8 tpc, u8 cfg, struct scatterlist *sg)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+	unsigned int length = sg->length;
+	u16 sec_cnt = (u16)(length / 512);
+	u8 trans_mode, dma_dir, flag;
+	unsigned int pipe;
+	struct memstick_dev *card = host->msh->card;
+
+	dev_dbg(ms_dev(host), "%s: tpc = 0x%02x, data_dir = %s, length = %d\n",
+			__func__, tpc, (data_dir == READ) ? "READ" : "WRITE",
+			length);
+
+	if (data_dir == READ) {
+		flag = MODE_CDIR;
+		dma_dir = DMA_DIR_FROM_CARD;
+		if (card->id.type != MEMSTICK_TYPE_PRO)
+			trans_mode = MS_TM_NORMAL_READ;
+		else
+			trans_mode = MS_TM_AUTO_READ;
+		pipe = usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN);
+	} else {
+		flag = MODE_CDOR;
+		dma_dir = DMA_DIR_TO_CARD;
+		if (card->id.type != MEMSTICK_TYPE_PRO)
+			trans_mode = MS_TM_NORMAL_WRITE;
+		else
+			trans_mode = MS_TM_AUTO_WRITE;
+		pipe = usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT);
+	}
+
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+	if (card->id.type == MEMSTICK_TYPE_PRO) {
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_SECTOR_CNT_H,
+				0xFF, (u8)(sec_cnt >> 8));
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_SECTOR_CNT_L,
+				0xFF, (u8)sec_cnt);
+	}
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC3,
+			0xFF, (u8)(length >> 24));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC2,
+			0xFF, (u8)(length >> 16));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC1,
+			0xFF, (u8)(length >> 8));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC0, 0xFF,
+			(u8)length);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL,
+			0x03 | DMA_PACK_SIZE_MASK, dma_dir | DMA_EN | DMA_512);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+			0x01, RING_BUFFER);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER,
+			0xFF, MS_TRANSFER_START | trans_mode);
+	rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER,
+			MS_TRANSFER_END, MS_TRANSFER_END);
+
+	err = rtsx_usb_send_cmd(ucr, flag | STAGE_MS_STATUS, 100);
+	if (err)
+		return err;
+
+	err = rtsx_usb_transfer_data(ucr, pipe, sg, length,
+			1, NULL, 10000);
+	if (err)
+		goto err_out;
+
+	err = rtsx_usb_get_rsp(ucr, 3, 15000);
+	if (err)
+		goto err_out;
+
+	if (ucr->rsp_buf[0] & MS_TRANSFER_ERR ||
+	    ucr->rsp_buf[1] & (MS_CRC16_ERR | MS_RDY_TIMEOUT)) {
+		err = -EIO;
+		goto err_out;
+	}
+	return 0;
+err_out:
+	ms_clear_error(host);
+	return err;
+}
+
+static int ms_write_bytes(struct rtsx_usb_ms *host, u8 tpc,
+		u8 cfg, u8 cnt, u8 *data, u8 *int_reg)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err, i;
+
+	dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc);
+
+	rtsx_usb_init_cmd(ucr);
+
+	for (i = 0; i < cnt; i++)
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				PPBUF_BASE2 + i, 0xFF, data[i]);
+
+	if (cnt % 2)
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				PPBUF_BASE2 + i, 0xFF, 0xFF);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+			0x01, PINGPONG_BUFFER);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER,
+			0xFF, MS_TRANSFER_START | MS_TM_WRITE_BYTES);
+	rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER,
+			MS_TRANSFER_END, MS_TRANSFER_END);
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
+
+	err = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+	if (err)
+		return err;
+
+	err = rtsx_usb_get_rsp(ucr, 2, 5000);
+	if (err || (ucr->rsp_buf[0] & MS_TRANSFER_ERR)) {
+		u8 val;
+
+		rtsx_usb_ep0_read_register(ucr, MS_TRANS_CFG, &val);
+		dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val);
+
+		if (int_reg)
+			*int_reg = val & 0x0F;
+
+		ms_print_debug_regs(host);
+
+		ms_clear_error(host);
+
+		if (!(tpc & 0x08)) {
+			if (val & MS_CRC16_ERR)
+				return -EIO;
+		} else {
+			if (!(val & 0x80)) {
+				if (val & (MS_INT_ERR | MS_INT_CMDNK))
+					return -EIO;
+			}
+		}
+
+		return -ETIMEDOUT;
+	}
+
+	if (int_reg)
+		*int_reg = ucr->rsp_buf[1] & 0x0F;
+
+	return 0;
+}
+
+static int ms_read_bytes(struct rtsx_usb_ms *host, u8 tpc,
+		u8 cfg, u8 cnt, u8 *data, u8 *int_reg)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err, i;
+	u8 *ptr;
+
+	dev_dbg(ms_dev(host), "%s: tpc = 0x%02x\n", __func__, tpc);
+
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TPC, 0xFF, tpc);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_BYTE_CNT, 0xFF, cnt);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANS_CFG, 0xFF, cfg);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+			0x01, PINGPONG_BUFFER);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MS_TRANSFER,
+			0xFF, MS_TRANSFER_START | MS_TM_READ_BYTES);
+	rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, MS_TRANSFER,
+			MS_TRANSFER_END, MS_TRANSFER_END);
+	for (i = 0; i < cnt - 1; i++)
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, PPBUF_BASE2 + i, 0, 0);
+	if (cnt % 2)
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, PPBUF_BASE2 + cnt, 0, 0);
+	else
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD,
+				PPBUF_BASE2 + cnt - 1, 0, 0);
+
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, MS_TRANS_CFG, 0, 0);
+
+	err = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+	if (err)
+		return err;
+
+	err = rtsx_usb_get_rsp(ucr, cnt + 2, 5000);
+	if (err || (ucr->rsp_buf[0] & MS_TRANSFER_ERR)) {
+		u8 val;
+
+		rtsx_usb_ep0_read_register(ucr, MS_TRANS_CFG, &val);
+		dev_dbg(ms_dev(host), "MS_TRANS_CFG: 0x%02x\n", val);
+
+		if (int_reg && (host->ifmode != MEMSTICK_SERIAL))
+			*int_reg = val & 0x0F;
+
+		ms_print_debug_regs(host);
+
+		ms_clear_error(host);
+
+		if (!(tpc & 0x08)) {
+			if (val & MS_CRC16_ERR)
+				return -EIO;
+		} else {
+			if (!(val & 0x80)) {
+				if (val & (MS_INT_ERR | MS_INT_CMDNK))
+					return -EIO;
+			}
+		}
+
+		return -ETIMEDOUT;
+	}
+
+	ptr = ucr->rsp_buf + 1;
+	for (i = 0; i < cnt; i++)
+		data[i] = *ptr++;
+
+
+	if (int_reg && (host->ifmode != MEMSTICK_SERIAL))
+		*int_reg = *ptr & 0x0F;
+
+	return 0;
+}
+
+static int rtsx_usb_ms_issue_cmd(struct rtsx_usb_ms *host)
+{
+	struct memstick_request *req = host->req;
+	int err = 0;
+	u8 cfg = 0, int_reg;
+
+	dev_dbg(ms_dev(host), "%s\n", __func__);
+
+	if (req->need_card_int) {
+		if (host->ifmode != MEMSTICK_SERIAL)
+			cfg = WAIT_INT;
+	}
+
+	if (req->long_data) {
+		err = ms_transfer_data(host, req->data_dir,
+				req->tpc, cfg, &(req->sg));
+	} else {
+		if (req->data_dir == READ)
+			err = ms_read_bytes(host, req->tpc, cfg,
+					req->data_len, req->data, &int_reg);
+		else
+			err = ms_write_bytes(host, req->tpc, cfg,
+					req->data_len, req->data, &int_reg);
+	}
+	if (err < 0)
+		return err;
+
+	if (req->need_card_int) {
+		if (host->ifmode == MEMSTICK_SERIAL) {
+			err = ms_read_bytes(host, MS_TPC_GET_INT,
+					NO_WAIT_INT, 1, &req->int_reg, NULL);
+			if (err < 0)
+				return err;
+		} else {
+
+			if (int_reg & MS_INT_CMDNK)
+				req->int_reg |= MEMSTICK_INT_CMDNAK;
+			if (int_reg & MS_INT_BREQ)
+				req->int_reg |= MEMSTICK_INT_BREQ;
+			if (int_reg & MS_INT_ERR)
+				req->int_reg |= MEMSTICK_INT_ERR;
+			if (int_reg & MS_INT_CED)
+				req->int_reg |= MEMSTICK_INT_CED;
+		}
+		dev_dbg(ms_dev(host), "int_reg: 0x%02x\n", req->int_reg);
+	}
+
+	return 0;
+}
+
+static void rtsx_usb_ms_handle_req(struct work_struct *work)
+{
+	struct rtsx_usb_ms *host = container_of(work,
+			struct rtsx_usb_ms, handle_req);
+	struct rtsx_ucr *ucr = host->ucr;
+	struct memstick_host *msh = host->msh;
+	int rc;
+
+	if (!host->req) {
+		do {
+			rc = memstick_next_req(msh, &host->req);
+			dev_dbg(ms_dev(host), "next req %d\n", rc);
+
+			if (!rc) {
+				mutex_lock(&ucr->dev_mutex);
+
+				if (rtsx_usb_card_exclusive_check(ucr,
+							RTSX_USB_MS_CARD))
+					host->req->error = -EIO;
+				else
+					host->req->error =
+						rtsx_usb_ms_issue_cmd(host);
+
+				mutex_unlock(&ucr->dev_mutex);
+
+				dev_dbg(ms_dev(host), "req result %d\n",
+						host->req->error);
+			}
+		} while (!rc);
+	}
+
+}
+
+static void rtsx_usb_ms_request(struct memstick_host *msh)
+{
+	struct rtsx_usb_ms *host = memstick_priv(msh);
+
+	dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+	if (!host->eject)
+		schedule_work(&host->handle_req);
+}
+
+static int rtsx_usb_ms_set_param(struct memstick_host *msh,
+		enum memstick_param param, int value)
+{
+	struct rtsx_usb_ms *host = memstick_priv(msh);
+	struct rtsx_ucr *ucr = host->ucr;
+	unsigned int clock = 0;
+	u8 ssc_depth = 0;
+	int err;
+
+	dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n",
+			__func__, param, value);
+
+	mutex_lock(&ucr->dev_mutex);
+
+	err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_MS_CARD);
+	if (err)
+		goto out;
+
+	switch (param) {
+	case MEMSTICK_POWER:
+		if (value == host->power_mode)
+			break;
+
+		if (value == MEMSTICK_POWER_ON) {
+			pm_runtime_get_sync(ms_dev(host));
+			err = ms_power_on(host);
+		} else if (value == MEMSTICK_POWER_OFF) {
+			err = ms_power_off(host);
+			if (host->msh->card)
+				pm_runtime_put_noidle(ms_dev(host));
+			else
+				pm_runtime_put(ms_dev(host));
+		} else
+			err = -EINVAL;
+		if (!err)
+			host->power_mode = value;
+		break;
+
+	case MEMSTICK_INTERFACE:
+		if (value == MEMSTICK_SERIAL) {
+			clock = 19000000;
+			ssc_depth = SSC_DEPTH_512K;
+			err = rtsx_usb_write_register(ucr, MS_CFG, 0x5A,
+				       MS_BUS_WIDTH_1 | PUSH_TIME_DEFAULT);
+			if (err < 0)
+				break;
+		} else if (value == MEMSTICK_PAR4) {
+			clock = 39000000;
+			ssc_depth = SSC_DEPTH_1M;
+
+			err = rtsx_usb_write_register(ucr, MS_CFG, 0x5A,
+					MS_BUS_WIDTH_4 | PUSH_TIME_ODD |
+					MS_NO_CHECK_INT);
+			if (err < 0)
+				break;
+		} else {
+			err = -EINVAL;
+			break;
+		}
+
+		err = rtsx_usb_switch_clock(ucr, clock,
+				ssc_depth, false, true, false);
+		if (err < 0) {
+			dev_dbg(ms_dev(host), "switch clock failed\n");
+			break;
+		}
+
+		host->ssc_depth = ssc_depth;
+		host->clock = clock;
+		host->ifmode = value;
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+out:
+	mutex_unlock(&ucr->dev_mutex);
+
+	/* power-on delay */
+	if (param == MEMSTICK_POWER && value == MEMSTICK_POWER_ON)
+		usleep_range(10000, 12000);
+
+	dev_dbg(ms_dev(host), "%s: return = %d\n", __func__, err);
+	return err;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rtsx_usb_ms_suspend(struct device *dev)
+{
+	struct rtsx_usb_ms *host = dev_get_drvdata(dev);
+	struct memstick_host *msh = host->msh;
+
+	dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+	memstick_suspend_host(msh);
+	return 0;
+}
+
+static int rtsx_usb_ms_resume(struct device *dev)
+{
+	struct rtsx_usb_ms *host = dev_get_drvdata(dev);
+	struct memstick_host *msh = host->msh;
+
+	dev_dbg(ms_dev(host), "--> %s\n", __func__);
+
+	memstick_resume_host(msh);
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/*
+ * Thread function of ms card slot detection. The thread starts right after
+ * successful host addition. It stops while the driver removal function sets
+ * host->eject true.
+ */
+static int rtsx_usb_detect_ms_card(void *__host)
+{
+	struct rtsx_usb_ms *host = (struct rtsx_usb_ms *)__host;
+	struct rtsx_ucr *ucr = host->ucr;
+	u8 val = 0;
+	int err;
+
+	for (;;) {
+		mutex_lock(&ucr->dev_mutex);
+
+		/* Check pending MS card changes */
+		err = rtsx_usb_read_register(ucr, CARD_INT_PEND, &val);
+		if (err) {
+			mutex_unlock(&ucr->dev_mutex);
+			goto poll_again;
+		}
+
+		/* Clear the pending */
+		rtsx_usb_write_register(ucr, CARD_INT_PEND,
+				XD_INT | MS_INT | SD_INT,
+				XD_INT | MS_INT | SD_INT);
+
+		mutex_unlock(&ucr->dev_mutex);
+
+		if (val & MS_INT) {
+			dev_dbg(ms_dev(host), "MS slot change detected\n");
+			memstick_detect_change(host->msh);
+		}
+
+poll_again:
+		if (host->eject)
+			break;
+
+		msleep(1000);
+	}
+
+	complete(&host->detect_ms_exit);
+	return 0;
+}
+
+static int rtsx_usb_ms_drv_probe(struct platform_device *pdev)
+{
+	struct memstick_host *msh;
+	struct rtsx_usb_ms *host;
+	struct rtsx_ucr *ucr;
+	int err;
+
+	ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent));
+	if (!ucr)
+		return -ENXIO;
+
+	dev_dbg(&(pdev->dev),
+			"Realtek USB Memstick controller found\n");
+
+	msh = memstick_alloc_host(sizeof(*host), &pdev->dev);
+	if (!msh)
+		return -ENOMEM;
+
+	host = memstick_priv(msh);
+	host->ucr = ucr;
+	host->msh = msh;
+	host->pdev = pdev;
+	host->power_mode = MEMSTICK_POWER_OFF;
+	platform_set_drvdata(pdev, host);
+
+	mutex_init(&host->host_mutex);
+	INIT_WORK(&host->handle_req, rtsx_usb_ms_handle_req);
+
+	init_completion(&host->detect_ms_exit);
+	host->detect_ms = kthread_create(rtsx_usb_detect_ms_card, host,
+			"rtsx_usb_ms_%d", pdev->id);
+	if (IS_ERR(host->detect_ms)) {
+		dev_dbg(&(pdev->dev),
+				"Unable to create polling thread.\n");
+		err = PTR_ERR(host->detect_ms);
+		goto err_out;
+	}
+
+	msh->request = rtsx_usb_ms_request;
+	msh->set_param = rtsx_usb_ms_set_param;
+	msh->caps = MEMSTICK_CAP_PAR4;
+
+	pm_runtime_enable(&pdev->dev);
+	err = memstick_add_host(msh);
+	if (err)
+		goto err_out;
+
+	wake_up_process(host->detect_ms);
+	return 0;
+err_out:
+	memstick_free_host(msh);
+	return err;
+}
+
+static int rtsx_usb_ms_drv_remove(struct platform_device *pdev)
+{
+	struct rtsx_usb_ms *host = platform_get_drvdata(pdev);
+	struct memstick_host *msh;
+	int err;
+
+	msh = host->msh;
+	host->eject = true;
+	cancel_work_sync(&host->handle_req);
+
+	mutex_lock(&host->host_mutex);
+	if (host->req) {
+		dev_dbg(&(pdev->dev),
+			"%s: Controller removed during transfer\n",
+			dev_name(&msh->dev));
+		host->req->error = -ENOMEDIUM;
+		do {
+			err = memstick_next_req(msh, &host->req);
+			if (!err)
+				host->req->error = -ENOMEDIUM;
+		} while (!err);
+	}
+	mutex_unlock(&host->host_mutex);
+
+	wait_for_completion(&host->detect_ms_exit);
+	memstick_remove_host(msh);
+	memstick_free_host(msh);
+
+	/* Balance possible unbalanced usage count
+	 * e.g. unconditional module removal
+	 */
+	if (pm_runtime_active(ms_dev(host)))
+		pm_runtime_put(ms_dev(host));
+
+	pm_runtime_disable(&pdev->dev);
+	platform_set_drvdata(pdev, NULL);
+
+	dev_dbg(&(pdev->dev),
+		": Realtek USB Memstick controller has been removed\n");
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rtsx_usb_ms_pm_ops,
+		rtsx_usb_ms_suspend, rtsx_usb_ms_resume);
+
+static struct platform_device_id rtsx_usb_ms_ids[] = {
+	{
+		.name = "rtsx_usb_ms",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, rtsx_usb_ms_ids);
+
+static struct platform_driver rtsx_usb_ms_driver = {
+	.probe		= rtsx_usb_ms_drv_probe,
+	.remove		= rtsx_usb_ms_drv_remove,
+	.id_table       = rtsx_usb_ms_ids,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "rtsx_usb_ms",
+		.pm	= &rtsx_usb_ms_pm_ops,
+	},
+};
+module_platform_driver(rtsx_usb_ms_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>");
+MODULE_DESCRIPTION("Realtek USB Memstick Card Host Driver");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6deb8a11c12..ee8204cc31e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -67,6 +67,18 @@ config MFD_BCM590XX
 	help
 	  Support for the BCM590xx PMUs from Broadcom
 
+config MFD_AXP20X
+	bool "X-Powers AXP20X"
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	depends on I2C=y
+	help
+	  If you say Y here you get support for the X-Powers AXP202 and AXP209.
+	  This driver include only the core APIs. You have to select individual
+	  components like regulators or the PEK (Power Enable Key) under the
+	  corresponding menus.
+
 config MFD_CROS_EC
 	tristate "ChromeOS Embedded Controller"
 	select MFD_CORE
@@ -250,6 +262,16 @@ config MFD_INTEL_MSIC
 	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
 	  devices used in Intel Medfield platforms.
 
+config MFD_IPAQ_MICRO
+	bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
+	depends on SA1100_H3100 || SA1100_H3600
+	select MFD_CORE
+	help
+	  Select this to get support for the Microcontroller found in
+	  the Compaq iPAQ handheld computers. This is an Atmel
+	  AT90LS8535 microcontroller flashed with a special iPAQ
+	  firmware using the custom protocol implemented in this driver.
+
 config MFD_JANZ_CMODIO
 	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 	select MFD_CORE
@@ -675,6 +697,7 @@ config MFD_DB8500_PRCMU
 config MFD_STMPE
 	bool "STMicroelectronics STMPE"
 	depends on (I2C=y || SPI_MASTER=y)
+	depends on OF
 	select MFD_CORE
 	help
 	  Support for the STMPE family of I/O Expanders from
@@ -719,6 +742,14 @@ config MFD_STA2X11
 	select MFD_CORE
 	select REGMAP_MMIO
 
+config MFD_SUN6I_PRCM
+	bool "Allwinner A31 PRCM controller"
+	depends on ARCH_SUNXI
+	select MFD_CORE
+	help
+	  Support for the PRCM (Power/Reset/Clock Management) unit available
+	  in A31 SoC.
+
 config MFD_SYSCON
 	bool "System Controller Register R/W Based on Regmap"
 	select REGMAP_MMIO
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index cec3487b539..8afedba535c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_MFD_STA2X11)	+= sta2x11-mfd.o
 obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
 obj-$(CONFIG_STMPE_I2C)		+= stmpe-i2c.o
 obj-$(CONFIG_STMPE_SPI)		+= stmpe-spi.o
+obj-$(CONFIG_MFD_SUN6I_PRCM)	+= sun6i-prcm.o
 obj-$(CONFIG_MFD_TC3589X)	+= tc3589x.o
 obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
@@ -102,6 +103,7 @@ obj-$(CONFIG_PMIC_DA9052)	+= da9052-irq.o
 obj-$(CONFIG_PMIC_DA9052)	+= da9052-core.o
 obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
 obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
+obj-$(CONFIG_MFD_AXP20X)	+= axp20x.o
 
 obj-$(CONFIG_MFD_LP3943)	+= lp3943.o
 obj-$(CONFIG_MFD_LP8788)	+= lp8788.o lp8788-irq.o
@@ -166,3 +168,4 @@ obj-$(CONFIG_MFD_RETU)		+= retu-mfd.o
 obj-$(CONFIG_MFD_AS3711)	+= as3711.o
 obj-$(CONFIG_MFD_AS3722)	+= as3722.o
 obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
+obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index f3a15aa54d7..fe418995108 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -151,22 +151,6 @@ int abx500_startup_irq_enabled(struct device *dev, unsigned int irq)
 }
 EXPORT_SYMBOL(abx500_startup_irq_enabled);
 
-void abx500_dump_all_banks(void)
-{
-	struct abx500_ops *ops;
-	struct device dummy_child = {NULL};
-	struct abx500_device_entry *dev_entry;
-
-	list_for_each_entry(dev_entry, &abx500_list, list) {
-		dummy_child.parent = dev_entry->dev;
-		ops = &dev_entry->ops;
-
-		if ((ops != NULL) && (ops->dump_all_banks != NULL))
-			ops->dump_all_banks(&dummy_child);
-	}
-}
-EXPORT_SYMBOL(abx500_dump_all_banks);
-
 MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
 MODULE_DESCRIPTION("ABX500 core driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 07e6e27be23..cfc191abae4 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -583,6 +583,7 @@ static const char *wm5102_supplies[] = {
 	"CPVDD",
 	"SPKVDDL",
 	"SPKVDDR",
+	"MICVDD",
 };
 
 static const struct mfd_cell wm5102_devs[] = {
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 88758ab9402..17102f58910 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -285,7 +285,7 @@ int arizona_irq_init(struct arizona *arizona)
 				  IRQF_ONESHOT, -1, irq,
 				  &arizona->irq_chip);
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret);
+		dev_err(arizona->dev, "Failed to add main IRQs: %d\n", ret);
 		goto err_aod;
 	}
 
diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
index ec684fcedb4..d9706ede8d3 100644
--- a/drivers/mfd/as3711.c
+++ b/drivers/mfd/as3711.c
@@ -114,7 +114,7 @@ static const struct regmap_config as3711_regmap_config = {
 };
 
 #ifdef CONFIG_OF
-static struct of_device_id as3711_of_match[] = {
+static const struct of_device_id as3711_of_match[] = {
 	{.compatible = "ams,as3711",},
 	{}
 };
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
new file mode 100644
index 00000000000..dee653989e3
--- /dev/null
+++ b/drivers/mfd/axp20x.c
@@ -0,0 +1,258 @@
+/*
+ * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ *
+ * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
+ * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as 4 configurable GPIOs.
+ *
+ * Author: Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#define AXP20X_OFF	0x80
+
+static const struct regmap_range axp20x_writeable_ranges[] = {
+	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
+	regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
+};
+
+static const struct regmap_range axp20x_volatile_ranges[] = {
+	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
+};
+
+static const struct regmap_access_table axp20x_writeable_table = {
+	.yes_ranges	= axp20x_writeable_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp20x_writeable_ranges),
+};
+
+static const struct regmap_access_table axp20x_volatile_table = {
+	.yes_ranges	= axp20x_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
+};
+
+static struct resource axp20x_pek_resources[] = {
+	{
+		.name	= "PEK_DBR",
+		.start	= AXP20X_IRQ_PEK_RIS_EDGE,
+		.end	= AXP20X_IRQ_PEK_RIS_EDGE,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "PEK_DBF",
+		.start	= AXP20X_IRQ_PEK_FAL_EDGE,
+		.end	= AXP20X_IRQ_PEK_FAL_EDGE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct regmap_config axp20x_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.wr_table	= &axp20x_writeable_table,
+	.volatile_table	= &axp20x_volatile_table,
+	.max_register	= AXP20X_FG_RES,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+#define AXP20X_IRQ(_irq, _off, _mask) \
+	[AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+
+static const struct regmap_irq axp20x_regmap_irqs[] = {
+	AXP20X_IRQ(ACIN_OVER_V,		0, 7),
+	AXP20X_IRQ(ACIN_PLUGIN,		0, 6),
+	AXP20X_IRQ(ACIN_REMOVAL,	0, 5),
+	AXP20X_IRQ(VBUS_OVER_V,		0, 4),
+	AXP20X_IRQ(VBUS_PLUGIN,		0, 3),
+	AXP20X_IRQ(VBUS_REMOVAL,	0, 2),
+	AXP20X_IRQ(VBUS_V_LOW,		0, 1),
+	AXP20X_IRQ(BATT_PLUGIN,		1, 7),
+	AXP20X_IRQ(BATT_REMOVAL,	1, 6),
+	AXP20X_IRQ(BATT_ENT_ACT_MODE,	1, 5),
+	AXP20X_IRQ(BATT_EXIT_ACT_MODE,	1, 4),
+	AXP20X_IRQ(CHARG,		1, 3),
+	AXP20X_IRQ(CHARG_DONE,		1, 2),
+	AXP20X_IRQ(BATT_TEMP_HIGH,	1, 1),
+	AXP20X_IRQ(BATT_TEMP_LOW,	1, 0),
+	AXP20X_IRQ(DIE_TEMP_HIGH,	2, 7),
+	AXP20X_IRQ(CHARG_I_LOW,		2, 6),
+	AXP20X_IRQ(DCDC1_V_LONG,	2, 5),
+	AXP20X_IRQ(DCDC2_V_LONG,	2, 4),
+	AXP20X_IRQ(DCDC3_V_LONG,	2, 3),
+	AXP20X_IRQ(PEK_SHORT,		2, 1),
+	AXP20X_IRQ(PEK_LONG,		2, 0),
+	AXP20X_IRQ(N_OE_PWR_ON,		3, 7),
+	AXP20X_IRQ(N_OE_PWR_OFF,	3, 6),
+	AXP20X_IRQ(VBUS_VALID,		3, 5),
+	AXP20X_IRQ(VBUS_NOT_VALID,	3, 4),
+	AXP20X_IRQ(VBUS_SESS_VALID,	3, 3),
+	AXP20X_IRQ(VBUS_SESS_END,	3, 2),
+	AXP20X_IRQ(LOW_PWR_LVL1,	3, 1),
+	AXP20X_IRQ(LOW_PWR_LVL2,	3, 0),
+	AXP20X_IRQ(TIMER,		4, 7),
+	AXP20X_IRQ(PEK_RIS_EDGE,	4, 6),
+	AXP20X_IRQ(PEK_FAL_EDGE,	4, 5),
+	AXP20X_IRQ(GPIO3_INPUT,		4, 3),
+	AXP20X_IRQ(GPIO2_INPUT,		4, 2),
+	AXP20X_IRQ(GPIO1_INPUT,		4, 1),
+	AXP20X_IRQ(GPIO0_INPUT,		4, 0),
+};
+
+static const struct of_device_id axp20x_of_match[] = {
+	{ .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
+	{ .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, axp20x_of_match);
+
+/*
+ * This is useless for OF-enabled devices, but it is needed by I2C subsystem
+ */
+static const struct i2c_device_id axp20x_i2c_id[] = {
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+
+static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
+	.name			= "axp20x_irq_chip",
+	.status_base		= AXP20X_IRQ1_STATE,
+	.ack_base		= AXP20X_IRQ1_STATE,
+	.mask_base		= AXP20X_IRQ1_EN,
+	.num_regs		= 5,
+	.irqs			= axp20x_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp20x_regmap_irqs),
+	.mask_invert		= true,
+	.init_ack_masked	= true,
+};
+
+static const char * const axp20x_supplies[] = {
+	"acin",
+	"vin2",
+	"vin3",
+	"ldo24in",
+	"ldo3in",
+	"ldo5in",
+};
+
+static struct mfd_cell axp20x_cells[] = {
+	{
+		.name			= "axp20x-pek",
+		.num_resources		= ARRAY_SIZE(axp20x_pek_resources),
+		.resources		= axp20x_pek_resources,
+	}, {
+		.name			= "axp20x-regulator",
+		.parent_supplies	= axp20x_supplies,
+		.num_parent_supplies	= ARRAY_SIZE(axp20x_supplies),
+	},
+};
+
+static struct axp20x_dev *axp20x_pm_power_off;
+static void axp20x_power_off(void)
+{
+	regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
+		     AXP20X_OFF);
+}
+
+static int axp20x_i2c_probe(struct i2c_client *i2c,
+			 const struct i2c_device_id *id)
+{
+	struct axp20x_dev *axp20x;
+	const struct of_device_id *of_id;
+	int ret;
+
+	axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
+	if (!axp20x)
+		return -ENOMEM;
+
+	of_id = of_match_device(axp20x_of_match, &i2c->dev);
+	if (!of_id) {
+		dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
+		return -ENODEV;
+	}
+	axp20x->variant = (long) of_id->data;
+
+	axp20x->i2c_client = i2c;
+	axp20x->dev = &i2c->dev;
+	dev_set_drvdata(axp20x->dev, axp20x);
+
+	axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+	if (IS_ERR(axp20x->regmap)) {
+		ret = PTR_ERR(axp20x->regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
+				  IRQF_ONESHOT | IRQF_SHARED, -1,
+				  &axp20x_regmap_irq_chip,
+				  &axp20x->regmap_irqc);
+	if (ret) {
+		dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
+			      ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+
+	if (ret) {
+		dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
+		regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
+		return ret;
+	}
+
+	if (!pm_power_off) {
+		axp20x_pm_power_off = axp20x;
+		pm_power_off = axp20x_power_off;
+	}
+
+	dev_info(&i2c->dev, "AXP20X driver loaded\n");
+
+	return 0;
+}
+
+static int axp20x_i2c_remove(struct i2c_client *i2c)
+{
+	struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
+
+	if (axp20x == axp20x_pm_power_off) {
+		axp20x_pm_power_off = NULL;
+		pm_power_off = NULL;
+	}
+
+	mfd_remove_devices(axp20x->dev);
+	regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
+
+	return 0;
+}
+
+static struct i2c_driver axp20x_i2c_driver = {
+	.driver = {
+		.name	= "axp20x",
+		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(axp20x_of_match),
+	},
+	.probe		= axp20x_i2c_probe,
+	.remove		= axp20x_i2c_remove,
+	.id_table	= axp20x_i2c_id,
+};
+
+module_i2c_driver(axp20x_i2c_driver);
+
+MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
index 43cba1a1973..e334de000e8 100644
--- a/drivers/mfd/bcm590xx.c
+++ b/drivers/mfd/bcm590xx.c
@@ -96,6 +96,12 @@ err:
 	return ret;
 }
 
+static int bcm590xx_i2c_remove(struct i2c_client *i2c)
+{
+	mfd_remove_devices(&i2c->dev);
+	return 0;
+}
+
 static const struct of_device_id bcm590xx_of_match[] = {
 	{ .compatible = "brcm,bcm59056" },
 	{ }
@@ -115,6 +121,7 @@ static struct i2c_driver bcm590xx_i2c_driver = {
 		   .of_match_table = of_match_ptr(bcm590xx_of_match),
 	},
 	.probe = bcm590xx_i2c_probe,
+	.remove = bcm590xx_i2c_remove,
 	.id_table = bcm590xx_i2c_id,
 };
 module_i2c_driver(bcm590xx_i2c_driver);
@@ -122,4 +129,4 @@ module_i2c_driver(bcm590xx_i2c_driver);
 MODULE_AUTHOR("Matt Porter <mporter@linaro.org>");
 MODULE_DESCRIPTION("BCM590xx multi-function driver");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:bcm590xx");
+MODULE_ALIAS("i2c:bcm590xx");
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 783fe2e73e1..38fe9bf0d16 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -30,7 +30,7 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
 	uint8_t *out;
 	int csum, i;
 
-	BUG_ON(msg->out_len > EC_HOST_PARAM_SIZE);
+	BUG_ON(msg->out_len > EC_PROTO2_MAX_PARAM_SIZE);
 	out = ec_dev->dout;
 	out[0] = EC_CMD_VERSION0 + msg->version;
 	out[1] = msg->cmd;
@@ -90,6 +90,11 @@ static const struct mfd_cell cros_devs[] = {
 		.id = 1,
 		.of_compatible = "google,cros-ec-keyb",
 	},
+	{
+		.name = "cros-ec-i2c-tunnel",
+		.id = 2,
+		.of_compatible = "google,cros-ec-i2c-tunnel",
+	},
 };
 
 int cros_ec_register(struct cros_ec_device *ec_dev)
@@ -184,3 +189,6 @@ int cros_ec_resume(struct cros_ec_device *ec_dev)
 EXPORT_SYMBOL(cros_ec_resume);
 
 #endif
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC core driver");
diff --git a/drivers/mfd/cros_ec_spi.c b/drivers/mfd/cros_ec_spi.c
index 84af8d7a429..0b8d3282916 100644
--- a/drivers/mfd/cros_ec_spi.c
+++ b/drivers/mfd/cros_ec_spi.c
@@ -39,14 +39,22 @@
 #define EC_MSG_PREAMBLE_COUNT		32
 
 /*
-  * We must get a response from the EC in 5ms. This is a very long
-  * time, but the flash write command can take 2-3ms. The EC command
-  * processing is currently not very fast (about 500us). We could
-  * look at speeding this up and making the flash write command a
-  * 'slow' command, requiring a GET_STATUS wait loop, like flash
-  * erase.
-  */
-#define EC_MSG_DEADLINE_MS		5
+ * Allow for a long time for the EC to respond.  We support i2c
+ * tunneling and support fairly long messages for the tunnel (249
+ * bytes long at the moment).  If we're talking to a 100 kHz device
+ * on the other end and need to transfer ~256 bytes, then we need:
+ *  10 us/bit * ~10 bits/byte * ~256 bytes = ~25ms
+ *
+ * We'll wait 4 times that to handle clock stretching and other
+ * paranoia.
+ *
+ * It's pretty unlikely that we'll really see a 249 byte tunnel in
+ * anything other than testing.  If this was more common we might
+ * consider having slow commands like this require a GET_STATUS
+ * wait loop.  The 'flash write' command would be another candidate
+ * for this, clocking in at 2-3ms.
+ */
+#define EC_MSG_DEADLINE_MS		100
 
 /*
   * Time between raising the SPI chip select (for the end of a
@@ -65,11 +73,13 @@
  *	if no record
  * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
  *      is sent when we want to turn off CS at the end of a transaction.
+ * @lock: mutex to ensure only one user of cros_ec_command_spi_xfer at a time
  */
 struct cros_ec_spi {
 	struct spi_device *spi;
 	s64 last_transfer_ns;
 	unsigned int end_of_msg_delay;
+	struct mutex lock;
 };
 
 static void debug_packet(struct device *dev, const char *name, u8 *ptr,
@@ -111,7 +121,9 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
 
 	/* Receive data until we see the header byte */
 	deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
-	do {
+	while (true) {
+		unsigned long start_jiffies = jiffies;
+
 		memset(&trans, 0, sizeof(trans));
 		trans.cs_change = 1;
 		trans.rx_buf = ptr = ec_dev->din;
@@ -132,12 +144,19 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
 				break;
 			}
 		}
+		if (ptr != end)
+			break;
 
-		if (time_after(jiffies, deadline)) {
+		/*
+		 * Use the time at the start of the loop as a timeout.  This
+		 * gives us one last shot at getting the transfer and is useful
+		 * in case we got context switched out for a while.
+		 */
+		if (time_after(start_jiffies, deadline)) {
 			dev_warn(ec_dev->dev, "EC failed to respond in time\n");
 			return -ETIMEDOUT;
 		}
-	} while (ptr == end);
+	}
 
 	/*
 	 * ptr now points to the header byte. Copy any valid data to the
@@ -208,6 +227,13 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 	int ret = 0, final_ret;
 	struct timespec ts;
 
+	/*
+	 * We have the shared ec_dev buffer plus we do lots of separate spi_sync
+	 * calls, so we need to make sure only one person is using this at a
+	 * time.
+	 */
+	mutex_lock(&ec_spi->lock);
+
 	len = cros_ec_prepare_tx(ec_dev, ec_msg);
 	dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
 
@@ -219,7 +245,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 		ktime_get_ts(&ts);
 		delay = timespec_to_ns(&ts) - ec_spi->last_transfer_ns;
 		if (delay < EC_SPI_RECOVERY_TIME_NS)
-			ndelay(delay);
+			ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
 	}
 
 	/* Transmit phase - send our message */
@@ -260,7 +286,7 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 		ret = final_ret;
 	if (ret < 0) {
 		dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
-		return ret;
+		goto exit;
 	}
 
 	/* check response error code */
@@ -269,14 +295,16 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 		dev_warn(ec_dev->dev, "command 0x%02x returned an error %d\n",
 			 ec_msg->cmd, ptr[0]);
 		debug_packet(ec_dev->dev, "in_err", ptr, len);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto exit;
 	}
 	len = ptr[1];
 	sum = ptr[0] + ptr[1];
 	if (len > ec_msg->in_len) {
 		dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
 			len, ec_msg->in_len);
-		return -ENOSPC;
+		ret = -ENOSPC;
+		goto exit;
 	}
 
 	/* copy response packet payload and compute checksum */
@@ -293,10 +321,14 @@ static int cros_ec_command_spi_xfer(struct cros_ec_device *ec_dev,
 		dev_err(ec_dev->dev,
 			"bad packet checksum, expected %02x, got %02x\n",
 			sum, ptr[len + 2]);
-		return -EBADMSG;
+		ret = -EBADMSG;
+		goto exit;
 	}
 
-	return 0;
+	ret = 0;
+exit:
+	mutex_unlock(&ec_spi->lock);
+	return ret;
 }
 
 static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev)
@@ -327,6 +359,7 @@ static int cros_ec_spi_probe(struct spi_device *spi)
 	if (ec_spi == NULL)
 		return -ENOMEM;
 	ec_spi->spi = spi;
+	mutex_init(&ec_spi->lock);
 	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
 	if (!ec_dev)
 		return -ENOMEM;
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index b11fdd63eec..193cf168ba8 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2300,9 +2300,6 @@ int prcmu_ac_wake_req(void)
 
 	if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
 			msecs_to_jiffies(5000))) {
-#if defined(CONFIG_DBX500_PRCMU_DEBUG)
-		db8500_prcmu_debug_dump(__func__, true, true);
-#endif
 		pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
 			__func__);
 		ret = -EFAULT;
@@ -3112,7 +3109,7 @@ static int db8500_prcmu_register_ab8500(struct device *parent,
 {
 	struct device_node *np;
 	struct resource ab8500_resource;
-	struct mfd_cell ab8500_cell = {
+	const struct mfd_cell ab8500_cell = {
 		.name = "ab8500-core",
 		.of_compatible = "stericsson,ab8500",
 		.id = AB8500_VERSION_AB8500,
diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c
new file mode 100644
index 00000000000..7e50fe0118e
--- /dev/null
+++ b/drivers/mfd/ipaq-micro.c
@@ -0,0 +1,482 @@
+/*
+ * Compaq iPAQ h3xxx Atmel microcontroller companion support
+ *
+ * This is an Atmel AT90LS8535 with a special flashed-in firmware that
+ * implements the special protocol used by this driver.
+ *
+ * based on previous kernel 2.4 version by Andrew Christian
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Dmitry Artamonow <mad_soft@inbox.ru>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/string.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include <mach/hardware.h>
+
+static void ipaq_micro_trigger_tx(struct ipaq_micro *micro)
+{
+	struct ipaq_micro_txdev *tx = &micro->tx;
+	struct ipaq_micro_msg *msg = micro->msg;
+	int i, bp;
+	u8 checksum;
+	u32 val;
+
+	bp = 0;
+	tx->buf[bp++] = CHAR_SOF;
+
+	checksum = ((msg->id & 0x0f) << 4) | (msg->tx_len & 0x0f);
+	tx->buf[bp++] = checksum;
+
+	for (i = 0; i < msg->tx_len; i++) {
+		tx->buf[bp++] = msg->tx_data[i];
+		checksum += msg->tx_data[i];
+	}
+
+	tx->buf[bp++] = checksum;
+	tx->len = bp;
+	tx->index = 0;
+	print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+		       tx->buf, tx->len, true);
+
+	/* Enable interrupt */
+	val = readl(micro->base + UTCR3);
+	val |= UTCR3_TIE;
+	writel(val, micro->base + UTCR3);
+}
+
+int ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg)
+{
+	unsigned long flags;
+
+	dev_dbg(micro->dev, "TX msg: %02x, %d bytes\n", msg->id, msg->tx_len);
+
+	spin_lock_irqsave(&micro->lock, flags);
+	if (micro->msg) {
+		list_add_tail(&msg->node, &micro->queue);
+		spin_unlock_irqrestore(&micro->lock, flags);
+		return 0;
+	}
+	micro->msg = msg;
+	ipaq_micro_trigger_tx(micro);
+	spin_unlock_irqrestore(&micro->lock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(ipaq_micro_tx_msg);
+
+static void micro_rx_msg(struct ipaq_micro *micro, u8 id, int len, u8 *data)
+{
+	int i;
+
+	dev_dbg(micro->dev, "RX msg: %02x, %d bytes\n", id, len);
+
+	spin_lock(&micro->lock);
+	switch (id) {
+	case MSG_VERSION:
+	case MSG_EEPROM_READ:
+	case MSG_EEPROM_WRITE:
+	case MSG_BACKLIGHT:
+	case MSG_NOTIFY_LED:
+	case MSG_THERMAL_SENSOR:
+	case MSG_BATTERY:
+		/* Handle synchronous messages */
+		if (micro->msg && micro->msg->id == id) {
+			struct ipaq_micro_msg *msg = micro->msg;
+
+			memcpy(msg->rx_data, data, len);
+			msg->rx_len = len;
+			complete(&micro->msg->ack);
+			if (!list_empty(&micro->queue)) {
+				micro->msg = list_entry(micro->queue.next,
+							struct ipaq_micro_msg,
+							node);
+				list_del_init(&micro->msg->node);
+				ipaq_micro_trigger_tx(micro);
+			} else
+				micro->msg = NULL;
+			dev_dbg(micro->dev, "OK RX message 0x%02x\n", id);
+		} else {
+			dev_err(micro->dev,
+				"out of band RX message 0x%02x\n", id);
+			if(!micro->msg)
+				dev_info(micro->dev, "no message queued\n");
+			else
+				dev_info(micro->dev, "expected message %02x\n",
+					 micro->msg->id);
+		}
+		break;
+	case MSG_KEYBOARD:
+		if (micro->key)
+			micro->key(micro->key_data, len, data);
+		else
+			dev_dbg(micro->dev, "key message ignored, no handle \n");
+		break;
+	case MSG_TOUCHSCREEN:
+		if (micro->ts)
+			micro->ts(micro->ts_data, len, data);
+		else
+			dev_dbg(micro->dev, "touchscreen message ignored, no handle \n");
+		break;
+	default:
+		dev_err(micro->dev,
+			"unknown msg %d [%d] ", id, len);
+		for (i = 0; i < len; ++i)
+			pr_cont("0x%02x ", data[i]);
+		pr_cont("\n");
+	}
+	spin_unlock(&micro->lock);
+}
+
+static void micro_process_char(struct ipaq_micro *micro, u8 ch)
+{
+	struct ipaq_micro_rxdev *rx = &micro->rx;
+
+	switch (rx->state) {
+	case STATE_SOF:	/* Looking for SOF */
+		if (ch == CHAR_SOF)
+			rx->state = STATE_ID; /* Next byte is the id and len */
+		break;
+	case STATE_ID: /* Looking for id and len byte */
+		rx->id = (ch & 0xf0) >> 4 ;
+		rx->len = (ch & 0x0f);
+		rx->index = 0;
+		rx->chksum = ch;
+		rx->state = (rx->len > 0) ? STATE_DATA : STATE_CHKSUM;
+		break;
+	case STATE_DATA: /* Looking for 'len' data bytes */
+		rx->chksum += ch;
+		rx->buf[rx->index] = ch;
+		if (++rx->index == rx->len)
+			rx->state = STATE_CHKSUM;
+		break;
+	case STATE_CHKSUM: /* Looking for the checksum */
+		if (ch == rx->chksum)
+			micro_rx_msg(micro, rx->id, rx->len, rx->buf);
+		rx->state = STATE_SOF;
+		break;
+	}
+}
+
+static void micro_rx_chars(struct ipaq_micro *micro)
+{
+	u32 status, ch;
+
+	while ((status = readl(micro->base + UTSR1)) & UTSR1_RNE) {
+		ch = readl(micro->base + UTDR);
+		if (status & UTSR1_PRE)
+			dev_err(micro->dev, "rx: parity error\n");
+		else if (status & UTSR1_FRE)
+			dev_err(micro->dev, "rx: framing error\n");
+		else if (status & UTSR1_ROR)
+			dev_err(micro->dev, "rx: overrun error\n");
+		micro_process_char(micro, ch);
+	}
+}
+
+static void ipaq_micro_get_version(struct ipaq_micro *micro)
+{
+	struct ipaq_micro_msg msg = {
+		.id = MSG_VERSION,
+	};
+
+	ipaq_micro_tx_msg_sync(micro, &msg);
+	if (msg.rx_len == 4) {
+		memcpy(micro->version, msg.rx_data, 4);
+		micro->version[4] = '\0';
+	} else if (msg.rx_len == 9) {
+		memcpy(micro->version, msg.rx_data, 4);
+		micro->version[4] = '\0';
+		/* Bytes 4-7 are "pack", byte 8 is "boot type" */
+	} else {
+		dev_err(micro->dev,
+			"illegal version message %d bytes\n", msg.rx_len);
+	}
+}
+
+static void ipaq_micro_eeprom_read(struct ipaq_micro *micro,
+				   u8 address, u8 len, u8 *data)
+{
+	struct ipaq_micro_msg msg = {
+		.id = MSG_EEPROM_READ,
+	};
+	u8 i;
+
+	for (i = 0; i < len; i++) {
+		msg.tx_data[0] = address + i;
+		msg.tx_data[1] = 1;
+		msg.tx_len = 2;
+		ipaq_micro_tx_msg_sync(micro, &msg);
+		memcpy(data + (i * 2), msg.rx_data, 2);
+	}
+}
+
+static char *ipaq_micro_str(u8 *wchar, u8 len)
+{
+	char retstr[256];
+	u8 i;
+
+	for (i = 0; i < len / 2; i++)
+		retstr[i] = wchar[i * 2];
+	return kstrdup(retstr, GFP_KERNEL);
+}
+
+static u16 ipaq_micro_to_u16(u8 *data)
+{
+	return data[1] << 8 | data[0];
+}
+
+static void ipaq_micro_eeprom_dump(struct ipaq_micro *micro)
+{
+	u8 dump[256];
+	char *str;
+
+	ipaq_micro_eeprom_read(micro, 0, 128, dump);
+	str = ipaq_micro_str(dump, 10);
+	if (str) {
+		dev_info(micro->dev, "HM version %s\n", str);
+		kfree(str);
+	}
+	str = ipaq_micro_str(dump+10, 40);
+	if (str) {
+		dev_info(micro->dev, "serial number: %s\n", str);
+		/* Feed the random pool with this */
+		add_device_randomness(str, strlen(str));
+		kfree(str);
+	}
+	str = ipaq_micro_str(dump+50, 20);
+	if (str) {
+		dev_info(micro->dev, "module ID: %s\n", str);
+		kfree(str);
+	}
+	str = ipaq_micro_str(dump+70, 10);
+	if (str) {
+		dev_info(micro->dev, "product revision: %s\n", str);
+		kfree(str);
+	}
+	dev_info(micro->dev, "product ID: %u\n", ipaq_micro_to_u16(dump+80));
+	dev_info(micro->dev, "frame rate: %u fps\n",
+		 ipaq_micro_to_u16(dump+82));
+	dev_info(micro->dev, "page mode: %u\n", ipaq_micro_to_u16(dump+84));
+	dev_info(micro->dev, "country ID: %u\n", ipaq_micro_to_u16(dump+86));
+	dev_info(micro->dev, "color display: %s\n",
+		 ipaq_micro_to_u16(dump+88) ? "yes" : "no");
+	dev_info(micro->dev, "ROM size: %u MiB\n", ipaq_micro_to_u16(dump+90));
+	dev_info(micro->dev, "RAM size: %u KiB\n", ipaq_micro_to_u16(dump+92));
+	dev_info(micro->dev, "screen: %u x %u\n",
+		 ipaq_micro_to_u16(dump+94), ipaq_micro_to_u16(dump+96));
+	print_hex_dump(KERN_DEBUG, "eeprom: ", DUMP_PREFIX_OFFSET, 16, 1,
+		       dump, 256, true);
+
+}
+
+static void micro_tx_chars(struct ipaq_micro *micro)
+{
+	struct ipaq_micro_txdev *tx = &micro->tx;
+	u32 val;
+
+	while ((tx->index < tx->len) &&
+	       (readl(micro->base + UTSR1) & UTSR1_TNF)) {
+		writel(tx->buf[tx->index], micro->base + UTDR);
+		tx->index++;
+	}
+
+	/* Stop interrupts */
+	val = readl(micro->base + UTCR3);
+	val &= ~UTCR3_TIE;
+	writel(val, micro->base + UTCR3);
+}
+
+static void micro_reset_comm(struct ipaq_micro *micro)
+{
+	struct ipaq_micro_rxdev *rx = &micro->rx;
+	u32 val;
+
+	if (micro->msg)
+		complete(&micro->msg->ack);
+
+	/* Initialize Serial channel protocol frame */
+	rx->state = STATE_SOF;  /* Reset the state machine */
+
+	/* Set up interrupts */
+	writel(0x01, micro->sdlc + 0x0); /* Select UART mode */
+
+	/* Clean up CR3 */
+	writel(0x0, micro->base + UTCR3);
+
+	/* Format: 8N1 */
+	writel(UTCR0_8BitData | UTCR0_1StpBit, micro->base + UTCR0);
+
+	/* Baud rate: 115200 */
+	writel(0x0, micro->base + UTCR1);
+	writel(0x1, micro->base + UTCR2);
+
+	/* Clear SR0 */
+	writel(0xff, micro->base + UTSR0);
+
+	/* Enable RX int, disable TX int */
+	writel(UTCR3_TXE | UTCR3_RXE | UTCR3_RIE, micro->base + UTCR3);
+	val = readl(micro->base + UTCR3);
+	val &= ~UTCR3_TIE;
+	writel(val, micro->base + UTCR3);
+}
+
+static irqreturn_t micro_serial_isr(int irq, void *dev_id)
+{
+	struct ipaq_micro *micro = dev_id;
+	struct ipaq_micro_txdev *tx = &micro->tx;
+	u32 status;
+
+	status = readl(micro->base + UTSR0);
+	do {
+		if (status & (UTSR0_RID | UTSR0_RFS)) {
+			if (status & UTSR0_RID)
+				/* Clear the Receiver IDLE bit */
+				writel(UTSR0_RID, micro->base + UTSR0);
+			micro_rx_chars(micro);
+		}
+
+		/* Clear break bits */
+		if (status & (UTSR0_RBB | UTSR0_REB))
+			writel(status & (UTSR0_RBB | UTSR0_REB),
+			       micro->base + UTSR0);
+
+		if (status & UTSR0_TFS)
+			micro_tx_chars(micro);
+
+		status = readl(micro->base + UTSR0);
+
+	} while (((tx->index < tx->len) && (status & UTSR0_TFS)) ||
+		 (status & (UTSR0_RFS | UTSR0_RID)));
+
+	return IRQ_HANDLED;
+}
+
+static const struct mfd_cell micro_cells[] = {
+	{ .name = "ipaq-micro-backlight", },
+	{ .name = "ipaq-micro-battery", },
+	{ .name = "ipaq-micro-keys", },
+	{ .name = "ipaq-micro-ts", },
+	{ .name = "ipaq-micro-leds", },
+};
+
+static int micro_resume(struct device *dev)
+{
+	struct ipaq_micro *micro = dev_get_drvdata(dev);
+
+	micro_reset_comm(micro);
+	mdelay(10);
+
+	return 0;
+}
+
+static int micro_probe(struct platform_device *pdev)
+{
+	struct ipaq_micro *micro;
+	struct resource *res;
+	int ret;
+	int irq;
+
+	micro = devm_kzalloc(&pdev->dev, sizeof(*micro), GFP_KERNEL);
+	if (!micro)
+		return -ENOMEM;
+
+	micro->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	micro->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(micro->base))
+		return PTR_ERR(micro->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res)
+		return -EINVAL;
+
+	micro->sdlc = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(micro->sdlc))
+		return PTR_ERR(micro->sdlc);
+
+	micro_reset_comm(micro);
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq)
+		return -EINVAL;
+	ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr,
+			       IRQF_SHARED, "ipaq-micro",
+			       micro);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to grab serial port IRQ\n");
+		return ret;
+	} else
+		dev_info(&pdev->dev, "grabbed serial port IRQ\n");
+
+	spin_lock_init(&micro->lock);
+	INIT_LIST_HEAD(&micro->queue);
+	platform_set_drvdata(pdev, micro);
+
+	ret = mfd_add_devices(&pdev->dev, pdev->id, micro_cells,
+			      ARRAY_SIZE(micro_cells), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "error adding MFD cells");
+		return ret;
+	}
+
+	/* Check version */
+	ipaq_micro_get_version(micro);
+	dev_info(&pdev->dev, "Atmel micro ASIC version %s\n", micro->version);
+	ipaq_micro_eeprom_dump(micro);
+
+	return 0;
+}
+
+static int micro_remove(struct platform_device *pdev)
+{
+	struct ipaq_micro *micro = platform_get_drvdata(pdev);
+	u32 val;
+
+	mfd_remove_devices(&pdev->dev);
+
+	val = readl(micro->base + UTCR3);
+	val &= ~(UTCR3_RXE | UTCR3_RIE); /* disable receive interrupt */
+	val &= ~(UTCR3_TXE | UTCR3_TIE); /* disable transmit interrupt */
+	writel(val, micro->base + UTCR3);
+
+	return 0;
+}
+
+static const struct dev_pm_ops micro_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(NULL, micro_resume)
+};
+
+static struct platform_driver micro_device_driver = {
+	.driver   = {
+		.name	= "ipaq-h3xxx-micro",
+		.pm	= &micro_dev_pm_ops,
+	},
+	.probe    = micro_probe,
+	.remove   = micro_remove,
+	/* .shutdown = micro_suspend, // FIXME */
+};
+module_platform_driver(micro_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro core and backlight");
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index 07692604e11..f7ff0188603 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -86,7 +86,7 @@ enum kempld_cells {
 	KEMPLD_UART,
 };
 
-static struct mfd_cell kempld_devs[] = {
+static const struct mfd_cell kempld_devs[] = {
 	[KEMPLD_I2C] = {
 		.name = "kempld-i2c",
 	},
@@ -288,9 +288,38 @@ EXPORT_SYMBOL_GPL(kempld_release_mutex);
  */
 static int kempld_get_info(struct kempld_device_data *pld)
 {
+	int ret;
 	struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
+	char major, minor;
+
+	ret = pdata->get_info(pld);
+	if (ret)
+		return ret;
+
+	/* The Kontron PLD firmware version string has the following format:
+	 * Pwxy.zzzz
+	 *   P:    Fixed
+	 *   w:    PLD number    - 1 hex digit
+	 *   x:    Major version - 1 alphanumerical digit (0-9A-V)
+	 *   y:    Minor version - 1 alphanumerical digit (0-9A-V)
+	 *   zzzz: Build number  - 4 zero padded hex digits */
 
-	return pdata->get_info(pld);
+	if (pld->info.major < 10)
+		major = pld->info.major + '0';
+	else
+		major = (pld->info.major - 10) + 'A';
+	if (pld->info.minor < 10)
+		minor = pld->info.minor + '0';
+	else
+		minor = (pld->info.minor - 10) + 'A';
+
+	ret = scnprintf(pld->info.version, sizeof(pld->info.version),
+			"P%X%c%c.%04X", pld->info.number, major, minor,
+			pld->info.buildnr);
+	if (ret < 0)
+		return ret;
+
+	return 0;
 }
 
 /*
@@ -307,9 +336,71 @@ static int kempld_register_cells(struct kempld_device_data *pld)
 	return pdata->register_cells(pld);
 }
 
+static const char *kempld_get_type_string(struct kempld_device_data *pld)
+{
+	const char *version_type;
+
+	switch (pld->info.type) {
+	case 0:
+		version_type = "release";
+		break;
+	case 1:
+		version_type = "debug";
+		break;
+	case 2:
+		version_type = "custom";
+		break;
+	default:
+		version_type = "unspecified";
+		break;
+	}
+
+	return version_type;
+}
+
+static ssize_t kempld_version_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", pld->info.version);
+}
+
+static ssize_t kempld_specification_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%d.%d\n", pld->info.spec_major,
+		       pld->info.spec_minor);
+}
+
+static ssize_t kempld_type_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct kempld_device_data *pld = dev_get_drvdata(dev);
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", kempld_get_type_string(pld));
+}
+
+static DEVICE_ATTR(pld_version, S_IRUGO, kempld_version_show, NULL);
+static DEVICE_ATTR(pld_specification, S_IRUGO, kempld_specification_show,
+		   NULL);
+static DEVICE_ATTR(pld_type, S_IRUGO, kempld_type_show, NULL);
+
+static struct attribute *pld_attributes[] = {
+	&dev_attr_pld_version.attr,
+	&dev_attr_pld_specification.attr,
+	&dev_attr_pld_type.attr,
+	NULL
+};
+
+static const struct attribute_group pld_attr_group = {
+	.attrs = pld_attributes,
+};
+
 static int kempld_detect_device(struct kempld_device_data *pld)
 {
-	char *version_type;
 	u8 index_reg;
 	int ret;
 
@@ -335,27 +426,19 @@ static int kempld_detect_device(struct kempld_device_data *pld)
 	if (ret)
 		return ret;
 
-	switch (pld->info.type) {
-	case 0:
-		version_type = "release";
-		break;
-	case 1:
-		version_type = "debug";
-		break;
-	case 2:
-		version_type = "custom";
-		break;
-	default:
-		version_type = "unspecified";
-	}
+	dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n",
+		 pld->info.version, kempld_get_type_string(pld),
+		 pld->info.spec_major, pld->info.spec_minor);
+
+	ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group);
+	if (ret)
+		return ret;
 
-	dev_info(pld->dev, "Found Kontron PLD %d\n", pld->info.number);
-	dev_info(pld->dev, "%s version %d.%d build %d, specification %d.%d\n",
-		 version_type, pld->info.major, pld->info.minor,
-		 pld->info.buildnr, pld->info.spec_major,
-		 pld->info.spec_minor);
+	ret = kempld_register_cells(pld);
+	if (ret)
+		sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
 
-	return kempld_register_cells(pld);
+	return ret;
 }
 
 static int kempld_probe(struct platform_device *pdev)
@@ -399,6 +482,8 @@ static int kempld_remove(struct platform_device *pdev)
 	struct kempld_device_data *pld = platform_get_drvdata(pdev);
 	struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
 
+	sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
+
 	mfd_remove_devices(&pdev->dev);
 	pdata->release_hardware_mutex(pld);
 
diff --git a/drivers/mfd/lp3943.c b/drivers/mfd/lp3943.c
index e32226836fb..335b930112b 100644
--- a/drivers/mfd/lp3943.c
+++ b/drivers/mfd/lp3943.c
@@ -62,7 +62,7 @@ static const struct lp3943_reg_cfg lp3943_mux_cfg[] = {
 	{ LP3943_REG_MUX3, 0xC0, 6 },
 };
 
-static struct mfd_cell lp3943_devs[] = {
+static const struct mfd_cell lp3943_devs[] = {
 	{
 		.name = "lp3943-pwm",
 		.of_compatible = "ti,lp3943-pwm",
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 3f10ea3f45d..7d8482ff586 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -488,6 +488,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 	[LPC_PPT] = {
 		.name = "Panther Point",
 		.iTCO_version = 2,
+		.gpio_version = ICH_V5_GPIO,
 	},
 	[LPC_LPT] = {
 		.name = "Lynx Point",
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index 484d372a489..4a5e885383f 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -26,7 +26,7 @@
 #include <linux/mfd/max14577.h>
 #include <linux/mfd/max14577-private.h>
 
-static struct mfd_cell max14577_devs[] = {
+static const struct mfd_cell max14577_devs[] = {
 	{
 		.name = "max14577-muic",
 		.of_compatible = "maxim,max14577-muic",
@@ -38,7 +38,7 @@ static struct mfd_cell max14577_devs[] = {
 	{ .name = "max14577-charger", },
 };
 
-static struct mfd_cell max77836_devs[] = {
+static const struct mfd_cell max77836_devs[] = {
 	{
 		.name = "max77836-muic",
 		.of_compatible = "maxim,max77836-muic",
@@ -57,7 +57,7 @@ static struct mfd_cell max77836_devs[] = {
 	},
 };
 
-static struct of_device_id max14577_dt_match[] = {
+static const struct of_device_id max14577_dt_match[] = {
 	{
 		.compatible = "maxim,max14577",
 		.data = (void *)MAXIM_DEVICE_TYPE_MAX14577,
@@ -292,7 +292,7 @@ static int max14577_i2c_probe(struct i2c_client *i2c,
 	struct device_node *np = i2c->dev.of_node;
 	int ret = 0;
 	const struct regmap_irq_chip *irq_chip;
-	struct mfd_cell *mfd_devs;
+	const struct mfd_cell *mfd_devs;
 	unsigned int mfd_devs_size;
 	int irq_flags;
 
@@ -331,7 +331,8 @@ static int max14577_i2c_probe(struct i2c_client *i2c,
 
 		of_id = of_match_device(max14577_dt_match, &i2c->dev);
 		if (of_id)
-			max14577->dev_type = (unsigned int)of_id->data;
+			max14577->dev_type =
+				(enum maxim_device_type)of_id->data;
 	} else {
 		max14577->dev_type = id->driver_data;
 	}
@@ -414,20 +415,18 @@ static int max14577_suspend(struct device *dev)
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev)) {
+	if (device_may_wakeup(dev))
 		enable_irq_wake(max14577->irq);
-		/*
-		 * MUIC IRQ must be disabled during suspend if this is
-		 * a wake up source because it will be handled before
-		 * resuming I2C.
-		 *
-		 * When device is woken up from suspend (e.g. by ADC change),
-		 * an interrupt occurs before resuming I2C bus controller.
-		 * Interrupt handler tries to read registers but this read
-		 * will fail because I2C is still suspended.
-		 */
-		disable_irq(max14577->irq);
-	}
+	/*
+	 * MUIC IRQ must be disabled during suspend because if it happens
+	 * while suspended it will be handled before resuming I2C.
+	 *
+	 * When device is woken up from suspend (e.g. by ADC change),
+	 * an interrupt occurs before resuming I2C bus controller.
+	 * Interrupt handler tries to read registers but this read
+	 * will fail because I2C is still suspended.
+	 */
+	disable_irq(max14577->irq);
 
 	return 0;
 }
@@ -437,10 +436,9 @@ static int max14577_resume(struct device *dev)
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev)) {
+	if (device_may_wakeup(dev))
 		disable_irq_wake(max14577->irq);
-		enable_irq(max14577->irq);
-	}
+	enable_irq(max14577->irq);
 
 	return 0;
 }
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
index e5fce765acc..ce869acf27a 100644
--- a/drivers/mfd/max77686.c
+++ b/drivers/mfd/max77686.c
@@ -47,7 +47,7 @@ static struct regmap_config max77686_regmap_config = {
 };
 
 #ifdef CONFIG_OF
-static struct of_device_id max77686_pmic_dt_match[] = {
+static const struct of_device_id max77686_pmic_dt_match[] = {
 	{.compatible = "maxim,max77686", .data = NULL},
 	{},
 };
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index c5535f01846..7e05428c756 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -243,7 +243,7 @@ static const struct dev_pm_ops max77693_pm = {
 };
 
 #ifdef CONFIG_OF
-static struct of_device_id max77693_dt_match[] = {
+static const struct of_device_id max77693_dt_match[] = {
 	{ .compatible = "maxim,max77693" },
 	{},
 };
diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
index 07740314b29..232749c8813 100644
--- a/drivers/mfd/max8907.c
+++ b/drivers/mfd/max8907.c
@@ -305,7 +305,7 @@ static int max8907_i2c_remove(struct i2c_client *i2c)
 }
 
 #ifdef CONFIG_OF
-static struct of_device_id max8907_of_match[] = {
+static const struct of_device_id max8907_of_match[] = {
 	{ .compatible = "maxim,max8907" },
 	{ },
 };
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 8cf7a015cfe..595364ee178 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -51,7 +51,7 @@ static const struct mfd_cell max8997_devs[] = {
 };
 
 #ifdef CONFIG_OF
-static struct of_device_id max8997_pmic_dt_match[] = {
+static const struct of_device_id max8997_pmic_dt_match[] = {
 	{ .compatible = "maxim,max8997-pmic", .data = (void *)TYPE_MAX8997 },
 	{},
 };
diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 592db06098e..a37cb7444b6 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -132,7 +132,7 @@ int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
 EXPORT_SYMBOL(max8998_update_reg);
 
 #ifdef CONFIG_OF
-static struct of_device_id max8998_dt_match[] = {
+static const struct of_device_id max8998_dt_match[] = {
 	{ .compatible = "maxim,max8998", .data = (void *)TYPE_MAX8998 },
 	{ .compatible = "national,lp3974", .data = (void *)TYPE_LP3974 },
 	{ .compatible = "ti,lp3974", .data = (void *)TYPE_LP3974 },
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 0c6c21c5b1a..acf5dd712eb 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -660,34 +660,22 @@ int mc13xxx_common_init(struct device *dev)
 	if (ret)
 		return ret;
 
+	mutex_init(&mc13xxx->lock);
+
 	ret = request_threaded_irq(mc13xxx->irq, NULL, mc13xxx_irq_thread,
 			IRQF_ONESHOT | IRQF_TRIGGER_HIGH, "mc13xxx", mc13xxx);
 	if (ret)
 		return ret;
 
-	mutex_init(&mc13xxx->lock);
-
 	if (mc13xxx_probe_flags_dt(mc13xxx) < 0 && pdata)
 		mc13xxx->flags = pdata->flags;
 
 	if (mc13xxx->flags & MC13XXX_USE_ADC)
 		mc13xxx_add_subdevice(mc13xxx, "%s-adc");
 
-	if (mc13xxx->flags & MC13XXX_USE_CODEC) {
-		if (pdata)
-			mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec",
-				pdata->codec, sizeof(*pdata->codec));
-		else
-			mc13xxx_add_subdevice(mc13xxx, "%s-codec");
-	}
-
 	if (mc13xxx->flags & MC13XXX_USE_RTC)
 		mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
 
-	if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
-		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
-				&pdata->touch, sizeof(pdata->touch));
-
 	if (pdata) {
 		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
 			&pdata->regulators, sizeof(pdata->regulators));
@@ -695,10 +683,20 @@ int mc13xxx_common_init(struct device *dev)
 				pdata->leds, sizeof(*pdata->leds));
 		mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
 				pdata->buttons, sizeof(*pdata->buttons));
+		if (mc13xxx->flags & MC13XXX_USE_CODEC)
+			mc13xxx_add_subdevice_pdata(mc13xxx, "%s-codec",
+				pdata->codec, sizeof(*pdata->codec));
+		if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
+			mc13xxx_add_subdevice_pdata(mc13xxx, "%s-ts",
+				&pdata->touch, sizeof(pdata->touch));
 	} else {
 		mc13xxx_add_subdevice(mc13xxx, "%s-regulator");
 		mc13xxx_add_subdevice(mc13xxx, "%s-led");
 		mc13xxx_add_subdevice(mc13xxx, "%s-pwrbutton");
+		if (mc13xxx->flags & MC13XXX_USE_CODEC)
+			mc13xxx_add_subdevice(mc13xxx, "%s-codec");
+		if (mc13xxx->flags & MC13XXX_USE_TOUCHSCREEN)
+			mc13xxx_add_subdevice(mc13xxx, "%s-ts");
 	}
 
 	return 0;
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index ad25bfa3fb0..5e2667afe2b 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1287,29 +1287,8 @@ static struct i2c_driver menelaus_i2c_driver = {
 	.id_table	= menelaus_id,
 };
 
-static int __init menelaus_init(void)
-{
-	int res;
-
-	res = i2c_add_driver(&menelaus_i2c_driver);
-	if (res < 0) {
-		pr_err(DRIVER_NAME ": driver registration failed\n");
-		return res;
-	}
-
-	return 0;
-}
-
-static void __exit menelaus_exit(void)
-{
-	i2c_del_driver(&menelaus_i2c_driver);
-
-	/* FIXME: Shutdown menelaus parts that can be shut down */
-}
+module_i2c_driver(menelaus_i2c_driver);
 
 MODULE_AUTHOR("Texas Instruments, Inc. (and others)");
 MODULE_DESCRIPTION("I2C interface for Menelaus.");
 MODULE_LICENSE("GPL");
-
-module_init(menelaus_init);
-module_exit(menelaus_exit);
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 26764924473..892d343193a 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -102,7 +102,7 @@ static int mfd_add_device(struct device *parent, int id,
 	pdev->dev.dma_mask = parent->dma_mask;
 	pdev->dev.dma_parms = parent->dma_parms;
 
-	ret = devm_regulator_bulk_register_supply_alias(
+	ret = regulator_bulk_register_supply_alias(
 			&pdev->dev, cell->parent_supplies,
 			parent, cell->parent_supplies,
 			cell->num_parent_supplies);
@@ -182,9 +182,9 @@ static int mfd_add_device(struct device *parent, int id,
 	return 0;
 
 fail_alias:
-	devm_regulator_bulk_unregister_supply_alias(&pdev->dev,
-						    cell->parent_supplies,
-						    cell->num_parent_supplies);
+	regulator_bulk_unregister_supply_alias(&pdev->dev,
+					       cell->parent_supplies,
+					       cell->num_parent_supplies);
 fail_res:
 	kfree(res);
 fail_device:
@@ -238,6 +238,9 @@ static int mfd_remove_devices_fn(struct device *dev, void *c)
 	pdev = to_platform_device(dev);
 	cell = mfd_get_cell(pdev);
 
+	regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies,
+					       cell->num_parent_supplies);
+
 	/* find the base address of usage_count pointers (for freeing) */
 	if (!*usage_count || (cell->usage_count < *usage_count))
 		*usage_count = cell->usage_count;
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 651e249287d..b48d80c367f 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -557,7 +557,7 @@ static int usbhs_omap_get_dt_pdata(struct device *dev,
 	return 0;
 }
 
-static struct of_device_id usbhs_child_match_table[] = {
+static const struct of_device_id usbhs_child_match_table[] = {
 	{ .compatible = "ti,omap-ehci", },
 	{ .compatible = "ti,omap-ohci", },
 	{ }
diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
index b97a97187ae..95951380354 100644
--- a/drivers/mfd/pm8921-core.c
+++ b/drivers/mfd/pm8921-core.c
@@ -26,7 +26,6 @@
 #include <linux/regmap.h>
 #include <linux/of_platform.h>
 #include <linux/mfd/core.h>
-#include <linux/mfd/pm8xxx/core.h>
 
 #define	SSBI_REG_ADDR_IRQ_BASE		0x1BB
 
@@ -57,7 +56,6 @@
 #define PM8921_NR_IRQS		256
 
 struct pm_irq_chip {
-	struct device		*dev;
 	struct regmap		*regmap;
 	spinlock_t		pm_irq_lock;
 	struct irq_domain	*irqdomain;
@@ -67,11 +65,6 @@ struct pm_irq_chip {
 	u8			config[0];
 };
 
-struct pm8921 {
-	struct device			*dev;
-	struct pm_irq_chip		*irq_chip;
-};
-
 static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp,
 				 unsigned int *ip)
 {
@@ -255,55 +248,6 @@ static struct irq_chip pm8xxx_irq_chip = {
 	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };
 
-/**
- * pm8xxx_get_irq_stat - get the status of the irq line
- * @chip: pointer to identify a pmic irq controller
- * @irq: the irq number
- *
- * The pm8xxx gpio and mpp rely on the interrupt block to read
- * the values on their pins. This function is to facilitate reading
- * the status of a gpio or an mpp line. The caller has to convert the
- * gpio number to irq number.
- *
- * RETURNS:
- * an int indicating the value read on that line
- */
-static int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
-{
-	int pmirq, rc;
-	unsigned int  block, bits, bit;
-	unsigned long flags;
-	struct irq_data *irq_data = irq_get_irq_data(irq);
-
-	pmirq = irq_data->hwirq;
-
-	block = pmirq / 8;
-	bit = pmirq % 8;
-
-	spin_lock_irqsave(&chip->pm_irq_lock, flags);
-
-	rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
-	if (rc) {
-		pr_err("Failed Selecting block irq=%d pmirq=%d blk=%d rc=%d\n",
-			irq, pmirq, block, rc);
-		goto bail_out;
-	}
-
-	rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
-	if (rc) {
-		pr_err("Failed Configuring irq=%d pmirq=%d blk=%d rc=%d\n",
-			irq, pmirq, block, rc);
-		goto bail_out;
-	}
-
-	rc = (bits & (1 << bit)) ? 1 : 0;
-
-bail_out:
-	spin_unlock_irqrestore(&chip->pm_irq_lock, flags);
-
-	return rc;
-}
-
 static int pm8xxx_irq_domain_map(struct irq_domain *d, unsigned int irq,
 				   irq_hw_number_t hwirq)
 {
@@ -324,56 +268,6 @@ static const struct irq_domain_ops pm8xxx_irq_domain_ops = {
 	.map = pm8xxx_irq_domain_map,
 };
 
-static int pm8921_readb(const struct device *dev, u16 addr, u8 *val)
-{
-	const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
-	const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
-	return ssbi_read(pmic->dev->parent, addr, val, 1);
-}
-
-static int pm8921_writeb(const struct device *dev, u16 addr, u8 val)
-{
-	const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
-	const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
-	return ssbi_write(pmic->dev->parent, addr, &val, 1);
-}
-
-static int pm8921_read_buf(const struct device *dev, u16 addr, u8 *buf,
-									int cnt)
-{
-	const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
-	const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
-	return ssbi_read(pmic->dev->parent, addr, buf, cnt);
-}
-
-static int pm8921_write_buf(const struct device *dev, u16 addr, u8 *buf,
-									int cnt)
-{
-	const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
-	const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
-	return ssbi_write(pmic->dev->parent, addr, buf, cnt);
-}
-
-static int pm8921_read_irq_stat(const struct device *dev, int irq)
-{
-	const struct pm8xxx_drvdata *pm8921_drvdata = dev_get_drvdata(dev);
-	const struct pm8921 *pmic = pm8921_drvdata->pm_chip_data;
-
-	return pm8xxx_get_irq_stat(pmic->irq_chip, irq);
-}
-
-static struct pm8xxx_drvdata pm8921_drvdata = {
-	.pmic_readb		= pm8921_readb,
-	.pmic_writeb		= pm8921_writeb,
-	.pmic_read_buf		= pm8921_read_buf,
-	.pmic_write_buf		= pm8921_write_buf,
-	.pmic_read_irq_stat	= pm8921_read_irq_stat,
-};
-
 static const struct regmap_config ssbi_regmap_config = {
 	.reg_bits = 16,
 	.val_bits = 8,
@@ -392,7 +286,6 @@ MODULE_DEVICE_TABLE(of, pm8921_id_table);
 
 static int pm8921_probe(struct platform_device *pdev)
 {
-	struct pm8921 *pmic;
 	struct regmap *regmap;
 	int irq, rc;
 	unsigned int val;
@@ -404,12 +297,6 @@ static int pm8921_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	pmic = devm_kzalloc(&pdev->dev, sizeof(struct pm8921), GFP_KERNEL);
-	if (!pmic) {
-		pr_err("Cannot alloc pm8921 struct\n");
-		return -ENOMEM;
-	}
-
 	regmap = devm_regmap_init(&pdev->dev, NULL, pdev->dev.parent,
 				  &ssbi_regmap_config);
 	if (IS_ERR(regmap))
@@ -434,18 +321,13 @@ static int pm8921_probe(struct platform_device *pdev)
 	pr_info("PMIC revision 2: %02X\n", val);
 	rev |= val << BITS_PER_BYTE;
 
-	pmic->dev = &pdev->dev;
-	pm8921_drvdata.pm_chip_data = pmic;
-	platform_set_drvdata(pdev, &pm8921_drvdata);
-
 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip) +
 					sizeof(chip->config[0]) * nirqs,
 					GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
 
-	pmic->irq_chip = chip;
-	chip->dev = &pdev->dev;
+	platform_set_drvdata(pdev, chip);
 	chip->regmap = regmap;
 	chip->num_irqs = nirqs;
 	chip->num_blocks = DIV_ROUND_UP(chip->num_irqs, 8);
@@ -481,8 +363,7 @@ static int pm8921_remove_child(struct device *dev, void *unused)
 static int pm8921_remove(struct platform_device *pdev)
 {
 	int irq = platform_get_irq(pdev, 0);
-	struct pm8921 *pmic = pm8921_drvdata.pm_chip_data;
-	struct pm_irq_chip *chip = pmic->irq_chip;
+	struct pm_irq_chip *chip = platform_get_drvdata(pdev);
 
 	device_for_each_child(&pdev->dev, NULL, pm8921_remove_child);
 	irq_set_chained_handler(irq, NULL);
diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c
index c79569750be..6575585f1d1 100644
--- a/drivers/mfd/rdc321x-southbridge.c
+++ b/drivers/mfd/rdc321x-southbridge.c
@@ -38,7 +38,7 @@ static struct resource rdc321x_wdt_resource[] = {
 };
 
 static struct rdc321x_gpio_pdata rdc321x_gpio_pdata = {
-	.max_gpios	= RDC321X_MAX_GPIO,
+	.max_gpios	= RDC321X_NUM_GPIO,
 };
 
 static struct resource rdc321x_gpio_resources[] = {
diff --git a/drivers/mfd/rtsx_usb.c b/drivers/mfd/rtsx_usb.c
index b53b9d46cc4..6352bec8419 100644
--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -29,7 +29,7 @@ static int polling_pipe = 1;
 module_param(polling_pipe, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(polling_pipe, "polling pipe (0: ctl, 1: bulk)");
 
-static struct mfd_cell rtsx_usb_cells[] = {
+static const struct mfd_cell rtsx_usb_cells[] = {
 	[RTSX_USB_SD_CARD] = {
 		.name = "rtsx_usb_sdmmc",
 		.pdata_size = 0,
@@ -67,7 +67,7 @@ static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
 	ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
 	add_timer(&ucr->sg_timer);
 	usb_sg_wait(&ucr->current_sg);
-	del_timer(&ucr->sg_timer);
+	del_timer_sync(&ucr->sg_timer);
 
 	if (act_len)
 		*act_len = ucr->current_sg.bytes;
@@ -644,14 +644,14 @@ static int rtsx_usb_probe(struct usb_interface *intf,
 	if (ret)
 		goto out_init_fail;
 
+	/* initialize USB SG transfer timer */
+	setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
+
 	ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
 			ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
 	if (ret)
 		goto out_init_fail;
 
-	/* initialize USB SG transfer timer */
-	init_timer(&ucr->sg_timer);
-	setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
 #ifdef CONFIG_PM
 	intf->needs_remote_wakeup = 1;
 	usb_enable_autosuspend(usb_dev);
@@ -687,9 +687,15 @@ static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
 	dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
 			__func__, message.event);
 
+	/*
+	 * Call to make sure LED is off during suspend to save more power.
+	 * It is NOT a permanent state and could be turned on anytime later.
+	 * Thus no need to call turn_on when resunming.
+	 */
 	mutex_lock(&ucr->dev_mutex);
 	rtsx_usb_turn_off_led(ucr);
 	mutex_unlock(&ucr->dev_mutex);
+
 	return 0;
 }
 
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 1cf27521fff..be06d0abbf1 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -25,7 +25,6 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/samsung/core.h>
 #include <linux/mfd/samsung/irq.h>
-#include <linux/mfd/samsung/rtc.h>
 #include <linux/mfd/samsung/s2mpa01.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps14.h>
@@ -91,7 +90,7 @@ static const struct mfd_cell s2mpa01_devs[] = {
 };
 
 #ifdef CONFIG_OF
-static struct of_device_id sec_dt_match[] = {
+static const struct of_device_id sec_dt_match[] = {
 	{	.compatible = "samsung,s5m8767-pmic",
 		.data = (void *)S5M8767X,
 	}, {
@@ -196,20 +195,6 @@ static const struct regmap_config s5m8767_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
-static const struct regmap_config s5m_rtc_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = SEC_RTC_REG_MAX,
-};
-
-static const struct regmap_config s2mps14_rtc_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = S2MPS_RTC_REG_MAX,
-};
-
 #ifdef CONFIG_OF
 /*
  * Only the common platform data elements for s5m8767 are parsed here from the
@@ -264,8 +249,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
 	struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
-	const struct regmap_config *regmap, *regmap_rtc;
+	const struct regmap_config *regmap;
 	struct sec_pmic_dev *sec_pmic;
+	unsigned long device_type;
 	int ret;
 
 	sec_pmic = devm_kzalloc(&i2c->dev, sizeof(struct sec_pmic_dev),
@@ -277,7 +263,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	sec_pmic->dev = &i2c->dev;
 	sec_pmic->i2c = i2c;
 	sec_pmic->irq = i2c->irq;
-	sec_pmic->type = sec_i2c_get_driver_data(i2c, id);
+	device_type = sec_i2c_get_driver_data(i2c, id);
 
 	if (sec_pmic->dev->of_node) {
 		pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
@@ -285,7 +271,7 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 			ret = PTR_ERR(pdata);
 			return ret;
 		}
-		pdata->device_type = sec_pmic->type;
+		pdata->device_type = device_type;
 	}
 	if (pdata) {
 		sec_pmic->device_type = pdata->device_type;
@@ -298,39 +284,21 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	switch (sec_pmic->device_type) {
 	case S2MPA01:
 		regmap = &s2mpa01_regmap_config;
-		/*
-		 * The rtc-s5m driver does not support S2MPA01 and there
-		 * is no mfd_cell for S2MPA01 RTC device.
-		 * However we must pass something to devm_regmap_init_i2c()
-		 * so use S5M-like regmap config even though it wouldn't work.
-		 */
-		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	case S2MPS11X:
 		regmap = &s2mps11_regmap_config;
-		/*
-		 * The rtc-s5m driver does not support S2MPS11 and there
-		 * is no mfd_cell for S2MPS11 RTC device.
-		 * However we must pass something to devm_regmap_init_i2c()
-		 * so use S5M-like regmap config even though it wouldn't work.
-		 */
-		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	case S2MPS14X:
 		regmap = &s2mps14_regmap_config;
-		regmap_rtc = &s2mps14_rtc_regmap_config;
 		break;
 	case S5M8763X:
 		regmap = &s5m8763_regmap_config;
-		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	case S5M8767X:
 		regmap = &s5m8767_regmap_config;
-		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	default:
 		regmap = &sec_regmap_config;
-		regmap_rtc = &s5m_rtc_regmap_config;
 		break;
 	}
 
@@ -342,21 +310,6 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
-	if (!sec_pmic->rtc) {
-		dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n");
-		return -ENODEV;
-	}
-	i2c_set_clientdata(sec_pmic->rtc, sec_pmic);
-
-	sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc);
-	if (IS_ERR(sec_pmic->regmap_rtc)) {
-		ret = PTR_ERR(sec_pmic->regmap_rtc);
-		dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
-			ret);
-		goto err_regmap_rtc;
-	}
-
 	if (pdata && pdata->cfg_pmic_irq)
 		pdata->cfg_pmic_irq();
 
@@ -403,8 +356,6 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 
 err_mfd:
 	sec_irq_exit(sec_pmic);
-err_regmap_rtc:
-	i2c_unregister_device(sec_pmic->rtc);
 	return ret;
 }
 
@@ -414,7 +365,6 @@ static int sec_pmic_remove(struct i2c_client *i2c)
 
 	mfd_remove_devices(sec_pmic->dev);
 	sec_irq_exit(sec_pmic);
-	i2c_unregister_device(sec_pmic->rtc);
 	return 0;
 }
 
@@ -424,19 +374,18 @@ static int sec_pmic_suspend(struct device *dev)
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
 	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev)) {
+	if (device_may_wakeup(dev))
 		enable_irq_wake(sec_pmic->irq);
-		/*
-		 * PMIC IRQ must be disabled during suspend for RTC alarm
-		 * to work properly.
-		 * When device is woken up from suspend by RTC Alarm, an
-		 * interrupt occurs before resuming I2C bus controller.
-		 * The interrupt is handled by regmap_irq_thread which tries
-		 * to read RTC registers. This read fails (I2C is still
-		 * suspended) and RTC Alarm interrupt is disabled.
-		 */
-		disable_irq(sec_pmic->irq);
-	}
+	/*
+	 * PMIC IRQ must be disabled during suspend for RTC alarm
+	 * to work properly.
+	 * When device is woken up from suspend, an
+	 * interrupt occurs before resuming I2C bus controller.
+	 * The interrupt is handled by regmap_irq_thread which tries
+	 * to read RTC registers. This read fails (I2C is still
+	 * suspended) and RTC Alarm interrupt is disabled.
+	 */
+	disable_irq(sec_pmic->irq);
 
 	return 0;
 }
@@ -446,10 +395,9 @@ static int sec_pmic_resume(struct device *dev)
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
 	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev)) {
+	if (device_may_wakeup(dev))
 		disable_irq_wake(sec_pmic->irq);
-		enable_irq(sec_pmic->irq);
-	}
+	enable_irq(sec_pmic->irq);
 
 	return 0;
 }
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 64e7913aadc..654e2c1dbf7 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -385,7 +385,7 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 				  &sec_pmic->irq_data);
 		break;
 	default:
-		dev_err(sec_pmic->dev, "Unknown device type %d\n",
+		dev_err(sec_pmic->dev, "Unknown device type %lu\n",
 			sec_pmic->device_type);
 		return -EINVAL;
 	}
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index e7dc441a8f8..81e6d0932bf 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1726,7 +1726,7 @@ static struct pci_driver sm501_pci_driver = {
 
 MODULE_ALIAS("platform:sm501");
 
-static struct of_device_id of_sm501_match_tbl[] = {
+static const struct of_device_id of_sm501_match_tbl[] = {
 	{ .compatible = "smi,sm501", },
 	{ /* end */ }
 };
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 0da02e11d58..a45f9c0a330 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/of_device.h>
 #include "stmpe.h"
 
 static int i2c_reg_read(struct stmpe *stmpe, u8 reg)
@@ -52,15 +53,41 @@ static struct stmpe_client_info i2c_ci = {
 	.write_block = i2c_block_write,
 };
 
+static const struct of_device_id stmpe_of_match[] = {
+	{ .compatible = "st,stmpe610", .data = (void *)STMPE610, },
+	{ .compatible = "st,stmpe801", .data = (void *)STMPE801, },
+	{ .compatible = "st,stmpe811", .data = (void *)STMPE811, },
+	{ .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
+	{ .compatible = "st,stmpe1801", .data = (void *)STMPE1801, },
+	{ .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
+	{ .compatible = "st,stmpe2403", .data = (void *)STMPE2403, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stmpe_of_match);
+
 static int
 stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 {
+	int partnum;
+	const struct of_device_id *of_id;
+
 	i2c_ci.data = (void *)id;
 	i2c_ci.irq = i2c->irq;
 	i2c_ci.client = i2c;
 	i2c_ci.dev = &i2c->dev;
 
-	return stmpe_probe(&i2c_ci, id->driver_data);
+	of_id = of_match_device(stmpe_of_match, &i2c->dev);
+	if (!of_id) {
+		/*
+		 * This happens when the I2C ID matches the node name
+		 * but no real compatible string has been given.
+		 */
+		dev_info(&i2c->dev, "matching on node name, compatible is preferred\n");
+		partnum = id->driver_data;
+	} else
+		partnum = (int)of_id->data;
+
+	return stmpe_probe(&i2c_ci, partnum);
 }
 
 static int stmpe_i2c_remove(struct i2c_client *i2c)
@@ -89,6 +116,7 @@ static struct i2c_driver stmpe_i2c_driver = {
 #ifdef CONFIG_PM
 		.pm = &stmpe_dev_pm_ops,
 #endif
+		.of_match_table = stmpe_of_match,
 	},
 	.probe		= stmpe_i2c_probe,
 	.remove		= stmpe_i2c_remove,
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 4a91f6771fb..3b6bfa7184a 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/mfd/core.h>
 #include <linux/delay.h>
+#include <linux/regulator/consumer.h>
 #include "stmpe.h"
 
 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
@@ -605,9 +606,18 @@ static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
 
 	if (blocks & STMPE_BLOCK_GPIO)
 		mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
 
 	if (blocks & STMPE_BLOCK_KEYPAD)
 		mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
+
+	if (blocks & STMPE_BLOCK_PWM)
+		mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
 
 	return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
 				enable ? mask : 0);
@@ -986,9 +996,6 @@ static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
 	int base = 0;
 	int num_irqs = stmpe->variant->num_irqs;
 
-	if (!np)
-		base = stmpe->irq_base;
-
 	stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
 					      &stmpe_irq_ops, stmpe);
 	if (!stmpe->domain) {
@@ -1067,7 +1074,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
 static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
 {
 	return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
-			       NULL, stmpe->irq_base, stmpe->domain);
+			       NULL, 0, stmpe->domain);
 }
 
 static int stmpe_devices_init(struct stmpe *stmpe)
@@ -1171,12 +1178,23 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
 	stmpe->dev = ci->dev;
 	stmpe->client = ci->client;
 	stmpe->pdata = pdata;
-	stmpe->irq_base = pdata->irq_base;
 	stmpe->ci = ci;
 	stmpe->partnum = partnum;
 	stmpe->variant = stmpe_variant_info[partnum];
 	stmpe->regs = stmpe->variant->regs;
 	stmpe->num_gpios = stmpe->variant->num_gpios;
+	stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
+	if (!IS_ERR(stmpe->vcc)) {
+		ret = regulator_enable(stmpe->vcc);
+		if (ret)
+			dev_warn(ci->dev, "failed to enable VCC supply\n");
+	}
+	stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
+	if (!IS_ERR(stmpe->vio)) {
+		ret = regulator_enable(stmpe->vio);
+		if (ret)
+			dev_warn(ci->dev, "failed to enable VIO supply\n");
+	}
 	dev_set_drvdata(stmpe->dev, stmpe);
 
 	if (ci->init)
@@ -1243,6 +1261,11 @@ int stmpe_probe(struct stmpe_client_info *ci, int partnum)
 
 int stmpe_remove(struct stmpe *stmpe)
 {
+	if (!IS_ERR(stmpe->vio))
+		regulator_disable(stmpe->vio);
+	if (!IS_ERR(stmpe->vcc))
+		regulator_disable(stmpe->vcc);
+
 	mfd_remove_devices(stmpe->dev);
 
 	return 0;
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 6639f1b0fef..9e4d21d37a1 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -192,7 +192,7 @@ int stmpe_remove(struct stmpe *stmpe);
 
 #define STMPE1601_SYS_CTRL_ENABLE_GPIO		(1 << 3)
 #define STMPE1601_SYS_CTRL_ENABLE_KPC		(1 << 1)
-#define STMPE1601_SYSCON_ENABLE_SPWM		(1 << 0)
+#define STMPE1601_SYS_CTRL_ENABLE_SPWM		(1 << 0)
 
 /* The 1601/2403 share the same masks */
 #define STMPE1601_AUTOSLEEP_TIMEOUT_MASK	(0x7)
diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
new file mode 100644
index 00000000000..718fc4d2adc
--- /dev/null
+++ b/drivers/mfd/sun6i-prcm.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * Allwinner PRCM (Power/Reset/Clock Management) driver
+ *
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+struct prcm_data {
+	int nsubdevs;
+	const struct mfd_cell *subdevs;
+};
+
+static const struct resource sun6i_a31_ar100_clk_res[] = {
+	{
+		.start = 0x0,
+		.end = 0x3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static const struct resource sun6i_a31_apb0_clk_res[] = {
+	{
+		.start = 0xc,
+		.end = 0xf,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static const struct resource sun6i_a31_apb0_gates_clk_res[] = {
+	{
+		.start = 0x28,
+		.end = 0x2b,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static const struct resource sun6i_a31_apb0_rstc_res[] = {
+	{
+		.start = 0xb0,
+		.end = 0xb3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static const struct mfd_cell sun6i_a31_prcm_subdevs[] = {
+	{
+		.name = "sun6i-a31-ar100-clk",
+		.of_compatible = "allwinner,sun6i-a31-ar100-clk",
+		.num_resources = ARRAY_SIZE(sun6i_a31_ar100_clk_res),
+		.resources = sun6i_a31_ar100_clk_res,
+	},
+	{
+		.name = "sun6i-a31-apb0-clk",
+		.of_compatible = "allwinner,sun6i-a31-apb0-clk",
+		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_clk_res),
+		.resources = sun6i_a31_apb0_clk_res,
+	},
+	{
+		.name = "sun6i-a31-apb0-gates-clk",
+		.of_compatible = "allwinner,sun6i-a31-apb0-gates-clk",
+		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_gates_clk_res),
+		.resources = sun6i_a31_apb0_gates_clk_res,
+	},
+	{
+		.name = "sun6i-a31-apb0-clock-reset",
+		.of_compatible = "allwinner,sun6i-a31-clock-reset",
+		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res),
+		.resources = sun6i_a31_apb0_rstc_res,
+	},
+};
+
+static const struct prcm_data sun6i_a31_prcm_data = {
+	.nsubdevs = ARRAY_SIZE(sun6i_a31_prcm_subdevs),
+	.subdevs = sun6i_a31_prcm_subdevs,
+};
+
+static const struct of_device_id sun6i_prcm_dt_ids[] = {
+	{
+		.compatible = "allwinner,sun6i-a31-prcm",
+		.data = &sun6i_a31_prcm_data,
+	},
+	{ /* sentinel */ },
+};
+
+static int sun6i_prcm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	const struct prcm_data *data;
+	struct resource *res;
+	int ret;
+
+	match = of_match_node(sun6i_prcm_dt_ids, np);
+	if (!match)
+		return -EINVAL;
+
+	data = match->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no prcm memory region provided\n");
+		return -ENOENT;
+	}
+
+	ret = mfd_add_devices(&pdev->dev, 0, data->subdevs, data->nsubdevs,
+			      res, -1, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add subdevices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver sun6i_prcm_driver = {
+	.driver = {
+		.name = "sun6i-prcm",
+		.owner = THIS_MODULE,
+		.of_match_table = sun6i_prcm_dt_ids,
+	},
+	.probe = sun6i_prcm_probe,
+};
+module_platform_driver(sun6i_prcm_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner sun6i PRCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index e2a04bb8bc1..ca15878ce5c 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -95,7 +95,11 @@ struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
 	struct device_node *syscon_np;
 	struct regmap *regmap;
 
-	syscon_np = of_parse_phandle(np, property, 0);
+	if (property)
+		syscon_np = of_parse_phandle(np, property, 0);
+	else
+		syscon_np = np;
+
 	if (!syscon_np)
 		return ERR_PTR(-ENODEV);
 
diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c
index 3b27482a174..a2e1990c9de 100644
--- a/drivers/mfd/tps6507x.c
+++ b/drivers/mfd/tps6507x.c
@@ -119,7 +119,7 @@ static const struct i2c_device_id tps6507x_i2c_id[] = {
 MODULE_DEVICE_TABLE(i2c, tps6507x_i2c_id);
 
 #ifdef CONFIG_OF
-static struct of_device_id tps6507x_of_match[] = {
+static const struct of_device_id tps6507x_of_match[] = {
 	{.compatible = "ti,tps6507x", },
 	{},
 };
diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
index a74bfb59f18..0d256cb002e 100644
--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -197,6 +197,7 @@ static struct regmap_irq_chip tps65218_irq_chip = {
 
 static const struct of_device_id of_tps65218_match_table[] = {
 	{ .compatible = "ti,tps65218", },
+	{}
 };
 
 static int tps65218_probe(struct i2c_client *client,
diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c
index 835e5549ecd..8e1dbc46958 100644
--- a/drivers/mfd/tps6586x.c
+++ b/drivers/mfd/tps6586x.c
@@ -444,7 +444,7 @@ static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *clien
 	return pdata;
 }
 
-static struct of_device_id tps6586x_of_match[] = {
+static const struct of_device_id tps6586x_of_match[] = {
 	{ .compatible = "ti,tps6586x", },
 	{ },
 };
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 460a014ca62..f9e42ea1cb1 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -379,7 +379,7 @@ err_sleep_init:
 }
 
 #ifdef CONFIG_OF
-static struct of_device_id tps65910_of_match[] = {
+static const struct of_device_id tps65910_of_match[] = {
 	{ .compatible = "ti,tps65910", .data = (void *)TPS65910},
 	{ .compatible = "ti,tps65911", .data = (void *)TPS65911},
 	{ },
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index 6e88f25832f..ae26d84b3a5 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -87,8 +87,13 @@ static struct reg_default twl6040_defaults[] = {
 };
 
 static struct reg_default twl6040_patch[] = {
-	/* Select I2C bus access to dual access registers */
-	{ TWL6040_REG_ACCCTL, 0x09 },
+	/*
+	 * Select I2C bus access to dual access registers
+	 * Interrupt register is cleared on read
+	 * Select fast mode for i2c (400KHz)
+	 */
+	{ TWL6040_REG_ACCCTL,
+		TWL6040_I2CSEL | TWL6040_INTCLRMODE | TWL6040_I2CMODE(1) },
 };
 
 
@@ -286,6 +291,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 		if (twl6040->power_count++)
 			goto out;
 
+		clk_prepare_enable(twl6040->clk32k);
+
 		/* Allow writes to the chip */
 		regcache_cache_only(twl6040->regmap, false);
 
@@ -341,6 +348,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 
 		twl6040->sysclk = 0;
 		twl6040->mclk = 0;
+
+		clk_disable_unprepare(twl6040->clk32k);
 	}
 
 out:
@@ -432,12 +441,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 					    TWL6040_HPLLENA;
 				break;
 			case 19200000:
-				/*
-				* PLL disabled
-				* (enable PLL if MCLK jitter quality
-				*  doesn't meet specification)
-				*/
-				hppllctl |= TWL6040_MCLK_19200KHZ;
+				/* PLL enabled, bypass mode */
+				hppllctl |= TWL6040_MCLK_19200KHZ |
+					    TWL6040_HPLLBP | TWL6040_HPLLENA;
 				break;
 			case 26000000:
 				/* PLL enabled, active mode */
@@ -445,9 +451,9 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 					    TWL6040_HPLLENA;
 				break;
 			case 38400000:
-				/* PLL enabled, active mode */
+				/* PLL enabled, bypass mode */
 				hppllctl |= TWL6040_MCLK_38400KHZ |
-					    TWL6040_HPLLENA;
+					    TWL6040_HPLLBP | TWL6040_HPLLENA;
 				break;
 			default:
 				dev_err(twl6040->dev,
@@ -639,6 +645,12 @@ static int twl6040_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, twl6040);
 
+	twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
+	if (IS_ERR(twl6040->clk32k)) {
+		dev_info(&client->dev, "clk32k is not handled\n");
+		twl6040->clk32k = NULL;
+	}
+
 	twl6040->supplies[0].supply = "vio";
 	twl6040->supplies[1].supply = "v2v1";
 	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
@@ -660,6 +672,9 @@ static int twl6040_probe(struct i2c_client *client,
 	mutex_init(&twl6040->mutex);
 	init_completion(&twl6040->ready);
 
+	regmap_register_patch(twl6040->regmap, twl6040_patch,
+			      ARRAY_SIZE(twl6040_patch));
+
 	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
 	if (twl6040->rev < 0) {
 		dev_err(&client->dev, "Failed to read revision register: %d\n",
@@ -679,6 +694,9 @@ static int twl6040_probe(struct i2c_client *client,
 					    GPIOF_OUT_INIT_LOW, "audpwron");
 		if (ret)
 			goto gpio_err;
+
+		/* Clear any pending interrupt */
+		twl6040_reg_read(twl6040, TWL6040_REG_INTID);
 	}
 
 	ret = regmap_add_irq_chip(twl6040->regmap, twl6040->irq, IRQF_ONESHOT,
@@ -707,10 +725,6 @@ static int twl6040_probe(struct i2c_client *client,
 		goto readyirq_err;
 	}
 
-	/* dual-access registers controlled by I2C only */
-	regmap_register_patch(twl6040->regmap, twl6040_patch,
-			      ARRAY_SIZE(twl6040_patch));
-
 	/*
 	 * The main functionality of twl6040 to provide audio on OMAP4+ systems.
 	 * We can add the ASoC codec child whenever this driver has been loaded.
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 070f8cfbbd7..c8a993bd17a 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -333,7 +333,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x000001AA, 0x0004 },   /* R426   - FLL2 GPIO Clock */ 
 	{ 0x00000200, 0x0006 },   /* R512   - Mic Charge Pump 1 */ 
 	{ 0x00000210, 0x00D4 },   /* R528   - LDO1 Control 1 */ 
-	{ 0x00000212, 0x0001 },   /* R530   - LDO1 Control 2 */
+	{ 0x00000212, 0x0000 },   /* R530   - LDO1 Control 2 */
 	{ 0x00000213, 0x0344 },   /* R531   - LDO2 Control 1 */ 
 	{ 0x00000218, 0x01A6 },   /* R536   - Mic Bias Ctrl 1 */ 
 	{ 0x00000219, 0x01A6 },   /* R537   - Mic Bias Ctrl 2 */ 
@@ -1037,6 +1037,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
+	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_7:
+	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_8:
 	case ARIZONA_COMFORT_NOISE_GENERATOR:
 	case ARIZONA_HAPTICS_CONTROL_1:
 	case ARIZONA_HAPTICS_CONTROL_2:
diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index 1942b6f231d..41a7f6fb780 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -468,10 +468,12 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000062, 0x01FF },    /* R98    - Sample Rate Sequence Select 2 */
 	{ 0x00000063, 0x01FF },    /* R99    - Sample Rate Sequence Select 3 */
 	{ 0x00000064, 0x01FF },    /* R100   - Sample Rate Sequence Select 4 */
-	{ 0x00000068, 0x01FF },    /* R104   - Always On Triggers Sequence Select 1 */
-	{ 0x00000069, 0x01FF },    /* R105   - Always On Triggers Sequence Select 2 */
-	{ 0x0000006A, 0x01FF },    /* R106   - Always On Triggers Sequence Select 3 */
-	{ 0x0000006B, 0x01FF },    /* R107   - Always On Triggers Sequence Select 4 */
+	{ 0x00000066, 0x01FF },    /* R102   - Always On Triggers Sequence Select 1 */
+	{ 0x00000067, 0x01FF },    /* R103   - Always On Triggers Sequence Select 2 */
+	{ 0x00000068, 0x01FF },    /* R104   - Always On Triggers Sequence Select 3 */
+	{ 0x00000069, 0x01FF },    /* R105   - Always On Triggers Sequence Select 4 */
+	{ 0x0000006A, 0x01FF },    /* R106   - Always On Triggers Sequence Select 5 */
+	{ 0x0000006B, 0x01FF },    /* R107   - Always On Triggers Sequence Select 6 */
 	{ 0x00000070, 0x0000 },    /* R112   - Comfort Noise Generator */
 	{ 0x00000090, 0x0000 },    /* R144   - Haptics Control 1 */
 	{ 0x00000091, 0x7FFF },    /* R145   - Haptics Control 2 */
@@ -549,6 +551,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x000002A8, 0x1422 },    /* R680   - Mic Detect Level 3 */
 	{ 0x000002A9, 0x300A },    /* R681   - Mic Detect Level 4 */
 	{ 0x000002C3, 0x0000 },    /* R707   - Mic noise mix control 1 */
+	{ 0x000002CB, 0x0000 },    /* R715   - Isolation control */
 	{ 0x000002D3, 0x0000 },    /* R723   - Jack detect analogue */
 	{ 0x00000300, 0x0000 },    /* R768   - Input Enables */
 	{ 0x00000308, 0x0000 },    /* R776   - Input Rate */
@@ -1498,6 +1501,8 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2:
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3:
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
+	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
+	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
 	case ARIZONA_COMFORT_NOISE_GENERATOR:
 	case ARIZONA_HAPTICS_CONTROL_1:
 	case ARIZONA_HAPTICS_CONTROL_2:
@@ -1580,6 +1585,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_MIC_DETECT_LEVEL_3:
 	case ARIZONA_MIC_DETECT_LEVEL_4:
 	case ARIZONA_MIC_NOISE_MIX_CONTROL_1:
+	case ARIZONA_ISOLATION_CONTROL:
 	case ARIZONA_JACK_DETECT_ANALOGUE:
 	case ARIZONA_INPUT_ENABLES:
 	case ARIZONA_INPUT_ENABLES_STATUS:
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index e5eae751aa1..c6fb5d16ca0 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -64,7 +64,7 @@ EXPORT_SYMBOL_GPL(wm8400_block_read);
 
 static int wm8400_register_codec(struct wm8400 *wm8400)
 {
-	struct mfd_cell cell = {
+	const struct mfd_cell cell = {
 		.name = "wm8400-codec",
 		.platform_data = wm8400,
 		.pdata_size = sizeof(*wm8400),
diff --git a/drivers/mfd/wm8997-tables.c b/drivers/mfd/wm8997-tables.c
index 5aa80768777..c7a81da64ee 100644
--- a/drivers/mfd/wm8997-tables.c
+++ b/drivers/mfd/wm8997-tables.c
@@ -174,10 +174,10 @@ static const struct reg_default wm8997_reg_default[] = {
 	{ 0x00000062, 0x01FF },    /* R98    - Sample Rate Sequence Select 2 */
 	{ 0x00000063, 0x01FF },    /* R99    - Sample Rate Sequence Select 3 */
 	{ 0x00000064, 0x01FF },    /* R100   - Sample Rate Sequence Select 4 */
-	{ 0x00000068, 0x01FF },    /* R104   - Always On Triggers Sequence Select 1 */
-	{ 0x00000069, 0x01FF },    /* R105   - Always On Triggers Sequence Select 2 */
-	{ 0x0000006A, 0x01FF },    /* R106   - Always On Triggers Sequence Select 3 */
-	{ 0x0000006B, 0x01FF },    /* R107   - Always On Triggers Sequence Select 4 */
+	{ 0x00000068, 0x01FF },    /* R104   - Always On Triggers Sequence Select 3 */
+	{ 0x00000069, 0x01FF },    /* R105   - Always On Triggers Sequence Select 4 */
+	{ 0x0000006A, 0x01FF },    /* R106   - Always On Triggers Sequence Select 5 */
+	{ 0x0000006B, 0x01FF },    /* R107   - Always On Triggers Sequence Select 6 */
 	{ 0x00000070, 0x0000 },    /* R112   - Comfort Noise Generator */
 	{ 0x00000090, 0x0000 },    /* R144   - Haptics Control 1 */
 	{ 0x00000091, 0x7FFF },    /* R145   - Haptics Control 2 */
@@ -814,10 +814,10 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2:
 	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3:
 	case ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4:
-	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1:
-	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2:
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3:
 	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4:
+	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5:
+	case ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6:
 	case ARIZONA_COMFORT_NOISE_GENERATOR:
 	case ARIZONA_HAPTICS_CONTROL_1:
 	case ARIZONA_HAPTICS_CONTROL_2:
@@ -846,6 +846,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_RATE_ESTIMATOR_3:
 	case ARIZONA_RATE_ESTIMATOR_4:
 	case ARIZONA_RATE_ESTIMATOR_5:
+	case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1:
 	case ARIZONA_FLL1_CONTROL_1:
 	case ARIZONA_FLL1_CONTROL_2:
 	case ARIZONA_FLL1_CONTROL_3:
@@ -880,6 +881,7 @@ static bool wm8997_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_GPIO_CLOCK:
 	case ARIZONA_MIC_CHARGE_PUMP_1:
 	case ARIZONA_LDO1_CONTROL_1:
+	case ARIZONA_LDO1_CONTROL_2:
 	case ARIZONA_LDO2_CONTROL_1:
 	case ARIZONA_MIC_BIAS_CTRL_1:
 	case ARIZONA_MIC_BIAS_CTRL_2:
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8aaf8c1f3f6..b675882307e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -694,3 +694,10 @@ config MMC_REALTEK_PCI
 	help
 	  Say Y here to include driver code to support SD/MMC card interface
 	  of Realtek PCI-E card reader
+
+config MMC_REALTEK_USB
+	tristate "Realtek USB SD/MMC Card Interface Driver"
+	depends on MFD_RTSX_USB
+	help
+	  Say Y here to include driver code to support SD/MMC card interface
+	  of Realtek RTS5129/39 series card reader
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 0c8aa5e1e30..3eb48b656f2 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_MMC_USHC)		+= ushc.o
 obj-$(CONFIG_MMC_WMT)		+= wmt-sdmmc.o
 
 obj-$(CONFIG_MMC_REALTEK_PCI)	+= rtsx_pci_sdmmc.o
+obj-$(CONFIG_MMC_REALTEK_USB)	+= rtsx_usb_sdmmc.o
 
 obj-$(CONFIG_MMC_SDHCI_PLTFM)		+= sdhci-pltfm.o
 obj-$(CONFIG_MMC_SDHCI_CNS3XXX)		+= sdhci-cns3xxx.o
diff --git a/drivers/mmc/host/rtsx_usb_sdmmc.c b/drivers/mmc/host/rtsx_usb_sdmmc.c
new file mode 100644
index 00000000000..e11fafa6fc6
--- /dev/null
+++ b/drivers/mmc/host/rtsx_usb_sdmmc.c
@@ -0,0 +1,1455 @@
+/* Realtek USB SD/MMC Card Interface driver
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ *   Roger Tseng <rogerable@realtek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/card.h>
+#include <linux/scatterlist.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mfd/rtsx_usb.h>
+#include <asm/unaligned.h>
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#define RTSX_USB_USE_LEDS_CLASS
+#endif
+
+struct rtsx_usb_sdmmc {
+	struct platform_device	*pdev;
+	struct rtsx_ucr	*ucr;
+	struct mmc_host		*mmc;
+	struct mmc_request	*mrq;
+
+	struct mutex		host_mutex;
+
+	u8			ssc_depth;
+	unsigned int		clock;
+	bool			vpclk;
+	bool			double_clk;
+	bool			host_removal;
+	bool			card_exist;
+	bool			initial_mode;
+	bool			ddr_mode;
+
+	unsigned char		power_mode;
+
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
+	struct led_classdev	led;
+	char			led_name[32];
+	struct work_struct	led_work;
+#endif
+};
+
+static inline struct device *sdmmc_dev(struct rtsx_usb_sdmmc *host)
+{
+	return &(host->pdev->dev);
+}
+
+static inline void sd_clear_error(struct rtsx_usb_sdmmc *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	rtsx_usb_ep0_write_register(ucr, CARD_STOP,
+				  SD_STOP | SD_CLR_ERR,
+				  SD_STOP | SD_CLR_ERR);
+
+	rtsx_usb_clear_dma_err(ucr);
+	rtsx_usb_clear_fsm_err(ucr);
+}
+
+#ifdef DEBUG
+static void sd_print_debug_regs(struct rtsx_usb_sdmmc *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	u8 val = 0;
+
+	rtsx_usb_ep0_read_register(ucr, SD_STAT1, &val);
+	dev_dbg(sdmmc_dev(host), "SD_STAT1: 0x%x\n", val);
+	rtsx_usb_ep0_read_register(ucr, SD_STAT2, &val);
+	dev_dbg(sdmmc_dev(host), "SD_STAT2: 0x%x\n", val);
+	rtsx_usb_ep0_read_register(ucr, SD_BUS_STAT, &val);
+	dev_dbg(sdmmc_dev(host), "SD_BUS_STAT: 0x%x\n", val);
+}
+#else
+#define sd_print_debug_regs(host)
+#endif /* DEBUG */
+
+static int sd_read_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd,
+	       u16 byte_cnt, u8 *buf, int buf_len, int timeout)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+	u8 trans_mode;
+
+	if (!buf)
+		buf_len = 0;
+
+	rtsx_usb_init_cmd(ucr);
+	if (cmd != NULL) {
+		dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__
+				, cmd->opcode);
+		if (cmd->opcode == MMC_SEND_TUNING_BLOCK)
+			trans_mode = SD_TM_AUTO_TUNING;
+		else
+			trans_mode = SD_TM_NORMAL_READ;
+
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD1, 0xFF, (u8)(cmd->arg >> 24));
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD2, 0xFF, (u8)(cmd->arg >> 16));
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD3, 0xFF, (u8)(cmd->arg >> 8));
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD4, 0xFF, (u8)cmd->arg);
+	} else {
+		trans_mode = SD_TM_AUTO_READ_3;
+	}
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H,
+			0xFF, (u8)(byte_cnt >> 8));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+			SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+			SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
+	if (trans_mode != SD_TM_AUTO_TUNING)
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER,
+			0xFF, trans_mode | SD_TRANSFER_START);
+	rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+			SD_TRANSFER_END, SD_TRANSFER_END);
+
+	if (cmd != NULL) {
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0);
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0);
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0);
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0);
+	}
+
+	err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout);
+	if (err) {
+		dev_dbg(sdmmc_dev(host),
+			"rtsx_usb_send_cmd failed (err = %d)\n", err);
+		return err;
+	}
+
+	err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout);
+	if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) {
+		sd_print_debug_regs(host);
+
+		if (!err) {
+			dev_dbg(sdmmc_dev(host),
+				"Transfer failed (SD_TRANSFER = %02x)\n",
+				ucr->rsp_buf[0]);
+			err = -EIO;
+		} else {
+			dev_dbg(sdmmc_dev(host),
+				"rtsx_usb_get_rsp failed (err = %d)\n", err);
+		}
+
+		return err;
+	}
+
+	if (cmd != NULL) {
+		cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1);
+		dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n",
+				cmd->resp[0]);
+	}
+
+	if (buf && buf_len) {
+		/* 2-byte aligned part */
+		err = rtsx_usb_read_ppbuf(ucr, buf, byte_cnt - (byte_cnt % 2));
+		if (err) {
+			dev_dbg(sdmmc_dev(host),
+				"rtsx_usb_read_ppbuf failed (err = %d)\n", err);
+			return err;
+		}
+
+		/* unaligned byte */
+		if (byte_cnt % 2)
+			return rtsx_usb_read_register(ucr,
+					PPBUF_BASE2 + byte_cnt,
+					buf + byte_cnt - 1);
+	}
+
+	return 0;
+}
+
+static int sd_write_data(struct rtsx_usb_sdmmc *host, struct mmc_command *cmd,
+		u16 byte_cnt, u8 *buf, int buf_len, int timeout)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+	u8 trans_mode;
+
+	if (!buf)
+		buf_len = 0;
+
+	if (buf && buf_len) {
+		err = rtsx_usb_write_ppbuf(ucr, buf, buf_len);
+		if (err) {
+			dev_dbg(sdmmc_dev(host),
+				"rtsx_usb_write_ppbuf failed (err = %d)\n",
+				err);
+			return err;
+		}
+	}
+
+	trans_mode = (cmd != NULL) ? SD_TM_AUTO_WRITE_2 : SD_TM_AUTO_WRITE_3;
+	rtsx_usb_init_cmd(ucr);
+
+	if (cmd != NULL) {
+		dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD%d\n", __func__,
+				cmd->opcode);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD0, 0xFF, (u8)(cmd->opcode) | 0x40);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD1, 0xFF, (u8)(cmd->arg >> 24));
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD2, 0xFF, (u8)(cmd->arg >> 16));
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD3, 0xFF, (u8)(cmd->arg >> 8));
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CMD4, 0xFF, (u8)cmd->arg);
+	}
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, (u8)byte_cnt);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H,
+			0xFF, (u8)(byte_cnt >> 8));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L, 0xFF, 1);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H, 0xFF, 0);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF,
+		SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+		SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_6);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+			CARD_DATA_SOURCE, 0x01, PINGPONG_BUFFER);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+			trans_mode | SD_TRANSFER_START);
+	rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+			SD_TRANSFER_END, SD_TRANSFER_END);
+
+	if (cmd != NULL) {
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD1, 0, 0);
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD2, 0, 0);
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD3, 0, 0);
+		rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_CMD4, 0, 0);
+	}
+
+	err = rtsx_usb_send_cmd(ucr, MODE_CR, timeout);
+	if (err) {
+		dev_dbg(sdmmc_dev(host),
+			"rtsx_usb_send_cmd failed (err = %d)\n", err);
+		return err;
+	}
+
+	err = rtsx_usb_get_rsp(ucr, !cmd ? 1 : 5, timeout);
+	if (err) {
+		sd_print_debug_regs(host);
+		dev_dbg(sdmmc_dev(host),
+			"rtsx_usb_get_rsp failed (err = %d)\n", err);
+		return err;
+	}
+
+	if (cmd != NULL) {
+		cmd->resp[0] = get_unaligned_be32(ucr->rsp_buf + 1);
+		dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n",
+				cmd->resp[0]);
+	}
+
+	return 0;
+}
+
+static void sd_send_cmd_get_rsp(struct rtsx_usb_sdmmc *host,
+		struct mmc_command *cmd)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	u8 cmd_idx = (u8)cmd->opcode;
+	u32 arg = cmd->arg;
+	int err = 0;
+	int timeout = 100;
+	int i;
+	u8 *ptr;
+	int stat_idx = 0;
+	int len = 2;
+	u8 rsp_type;
+
+	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
+			__func__, cmd_idx, arg);
+
+	/* Response type:
+	 * R0
+	 * R1, R5, R6, R7
+	 * R1b
+	 * R2
+	 * R3, R4
+	 */
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		rsp_type = SD_RSP_TYPE_R0;
+		break;
+	case MMC_RSP_R1:
+		rsp_type = SD_RSP_TYPE_R1;
+		break;
+	case MMC_RSP_R1 & ~MMC_RSP_CRC:
+		rsp_type = SD_RSP_TYPE_R1 | SD_NO_CHECK_CRC7;
+		break;
+	case MMC_RSP_R1B:
+		rsp_type = SD_RSP_TYPE_R1b;
+		break;
+	case MMC_RSP_R2:
+		rsp_type = SD_RSP_TYPE_R2;
+		break;
+	case MMC_RSP_R3:
+		rsp_type = SD_RSP_TYPE_R3;
+		break;
+	default:
+		dev_dbg(sdmmc_dev(host), "cmd->flag is not valid\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (rsp_type == SD_RSP_TYPE_R1b)
+		timeout = 3000;
+
+	if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+		err = rtsx_usb_write_register(ucr, SD_BUS_STAT,
+				SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP,
+				SD_CLK_TOGGLE_EN);
+		if (err)
+			goto out;
+	}
+
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD0, 0xFF, 0x40 | cmd_idx);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD1, 0xFF, (u8)(arg >> 24));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD2, 0xFF, (u8)(arg >> 16));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD3, 0xFF, (u8)(arg >> 8));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CMD4, 0xFF, (u8)arg);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, rsp_type);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+			0x01, PINGPONG_BUFFER);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER,
+			0xFF, SD_TM_CMD_RSP | SD_TRANSFER_START);
+	rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+		     SD_TRANSFER_END | SD_STAT_IDLE,
+		     SD_TRANSFER_END | SD_STAT_IDLE);
+
+	if (rsp_type == SD_RSP_TYPE_R2) {
+		/* Read data from ping-pong buffer */
+		for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
+			rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0);
+		stat_idx = 16;
+	} else if (rsp_type != SD_RSP_TYPE_R0) {
+		/* Read data from SD_CMDx registers */
+		for (i = SD_CMD0; i <= SD_CMD4; i++)
+			rtsx_usb_add_cmd(ucr, READ_REG_CMD, (u16)i, 0, 0);
+		stat_idx = 5;
+	}
+	len += stat_idx;
+
+	rtsx_usb_add_cmd(ucr, READ_REG_CMD, SD_STAT1, 0, 0);
+
+	err = rtsx_usb_send_cmd(ucr, MODE_CR, 100);
+	if (err) {
+		dev_dbg(sdmmc_dev(host),
+			"rtsx_usb_send_cmd error (err = %d)\n", err);
+		goto out;
+	}
+
+	err = rtsx_usb_get_rsp(ucr, len, timeout);
+	if (err || (ucr->rsp_buf[0] & SD_TRANSFER_ERR)) {
+		sd_print_debug_regs(host);
+		sd_clear_error(host);
+
+		if (!err) {
+			dev_dbg(sdmmc_dev(host),
+				"Transfer failed (SD_TRANSFER = %02x)\n",
+					ucr->rsp_buf[0]);
+			err = -EIO;
+		} else {
+			dev_dbg(sdmmc_dev(host),
+				"rtsx_usb_get_rsp failed (err = %d)\n", err);
+		}
+
+		goto out;
+	}
+
+	if (rsp_type == SD_RSP_TYPE_R0) {
+		err = 0;
+		goto out;
+	}
+
+	/* Skip result of CHECK_REG_CMD */
+	ptr = ucr->rsp_buf + 1;
+
+	/* Check (Start,Transmission) bit of Response */
+	if ((ptr[0] & 0xC0) != 0) {
+		err = -EILSEQ;
+		dev_dbg(sdmmc_dev(host), "Invalid response bit\n");
+		goto out;
+	}
+
+	/* Check CRC7 */
+	if (!(rsp_type & SD_NO_CHECK_CRC7)) {
+		if (ptr[stat_idx] & SD_CRC7_ERR) {
+			err = -EILSEQ;
+			dev_dbg(sdmmc_dev(host), "CRC7 error\n");
+			goto out;
+		}
+	}
+
+	if (rsp_type == SD_RSP_TYPE_R2) {
+		for (i = 0; i < 4; i++) {
+			cmd->resp[i] = get_unaligned_be32(ptr + 1 + i * 4);
+			dev_dbg(sdmmc_dev(host), "cmd->resp[%d] = 0x%08x\n",
+					i, cmd->resp[i]);
+		}
+	} else {
+		cmd->resp[0] = get_unaligned_be32(ptr + 1);
+		dev_dbg(sdmmc_dev(host), "cmd->resp[0] = 0x%08x\n",
+				cmd->resp[0]);
+	}
+
+out:
+	cmd->error = err;
+}
+
+static int sd_rw_multi(struct rtsx_usb_sdmmc *host, struct mmc_request *mrq)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	struct mmc_data *data = mrq->data;
+	int read = (data->flags & MMC_DATA_READ) ? 1 : 0;
+	u8 cfg2, trans_mode;
+	int err;
+	u8 flag;
+	size_t data_len = data->blksz * data->blocks;
+	unsigned int pipe;
+
+	if (read) {
+		dev_dbg(sdmmc_dev(host), "%s: read %zu bytes\n",
+				__func__, data_len);
+		cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+			SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0;
+		trans_mode = SD_TM_AUTO_READ_3;
+	} else {
+		dev_dbg(sdmmc_dev(host), "%s: write %zu bytes\n",
+				__func__, data_len);
+		cfg2 = SD_NO_CALCULATE_CRC7 | SD_CHECK_CRC16 |
+			SD_NO_WAIT_BUSY_END | SD_NO_CHECK_CRC7 | SD_RSP_LEN_0;
+		trans_mode = SD_TM_AUTO_WRITE_3;
+	}
+
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_L, 0xFF, 0x00);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BYTE_CNT_H, 0xFF, 0x02);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_L,
+			0xFF, (u8)data->blocks);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BLOCK_CNT_H,
+			0xFF, (u8)(data->blocks >> 8));
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_DATA_SOURCE,
+			0x01, RING_BUFFER);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC3,
+			0xFF, (u8)(data_len >> 24));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC2,
+			0xFF, (u8)(data_len >> 16));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC1,
+			0xFF, (u8)(data_len >> 8));
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_TC0,
+			0xFF, (u8)data_len);
+	if (read) {
+		flag = MODE_CDIR;
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL,
+				0x03 | DMA_PACK_SIZE_MASK,
+				DMA_DIR_FROM_CARD | DMA_EN | DMA_512);
+	} else {
+		flag = MODE_CDOR;
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, MC_DMA_CTL,
+				0x03 | DMA_PACK_SIZE_MASK,
+				DMA_DIR_TO_CARD | DMA_EN | DMA_512);
+	}
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG2, 0xFF, cfg2);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_TRANSFER, 0xFF,
+			trans_mode | SD_TRANSFER_START);
+	rtsx_usb_add_cmd(ucr, CHECK_REG_CMD, SD_TRANSFER,
+			SD_TRANSFER_END, SD_TRANSFER_END);
+
+	err = rtsx_usb_send_cmd(ucr, flag, 100);
+	if (err)
+		return err;
+
+	if (read)
+		pipe = usb_rcvbulkpipe(ucr->pusb_dev, EP_BULK_IN);
+	else
+		pipe = usb_sndbulkpipe(ucr->pusb_dev, EP_BULK_OUT);
+
+	err = rtsx_usb_transfer_data(ucr, pipe, data->sg, data_len,
+			data->sg_len,  NULL, 10000);
+	if (err) {
+		dev_dbg(sdmmc_dev(host), "rtsx_usb_transfer_data error %d\n"
+				, err);
+		sd_clear_error(host);
+		return err;
+	}
+
+	return rtsx_usb_get_rsp(ucr, 1, 2000);
+}
+
+static inline void sd_enable_initial_mode(struct rtsx_usb_sdmmc *host)
+{
+	rtsx_usb_write_register(host->ucr, SD_CFG1,
+			SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128);
+}
+
+static inline void sd_disable_initial_mode(struct rtsx_usb_sdmmc *host)
+{
+	rtsx_usb_write_register(host->ucr, SD_CFG1,
+			SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
+}
+
+static void sd_normal_rw(struct rtsx_usb_sdmmc *host,
+		struct mmc_request *mrq)
+{
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_data *data = mrq->data;
+	u8 *buf;
+
+	buf = kzalloc(data->blksz, GFP_NOIO);
+	if (!buf) {
+		cmd->error = -ENOMEM;
+		return;
+	}
+
+	if (data->flags & MMC_DATA_READ) {
+		if (host->initial_mode)
+			sd_disable_initial_mode(host);
+
+		cmd->error = sd_read_data(host, cmd, (u16)data->blksz, buf,
+				data->blksz, 200);
+
+		if (host->initial_mode)
+			sd_enable_initial_mode(host);
+
+		sg_copy_from_buffer(data->sg, data->sg_len, buf, data->blksz);
+	} else {
+		sg_copy_to_buffer(data->sg, data->sg_len, buf, data->blksz);
+
+		cmd->error = sd_write_data(host, cmd, (u16)data->blksz, buf,
+				data->blksz, 200);
+	}
+
+	kfree(buf);
+}
+
+static int sd_change_phase(struct rtsx_usb_sdmmc *host, u8 sample_point, int tx)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+
+	dev_dbg(sdmmc_dev(host), "%s: %s sample_point = %d\n",
+			__func__, tx ? "TX" : "RX", sample_point);
+
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, CLK_CHANGE);
+
+	if (tx)
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+				0x0F, sample_point);
+	else
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK1_CTL,
+				0x0F, sample_point);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+			PHASE_NOT_RESET, PHASE_NOT_RESET);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CLK_DIV, CLK_CHANGE, 0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1, SD_ASYNC_FIFO_RST, 0);
+
+	err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static inline u32 get_phase_point(u32 phase_map, unsigned int idx)
+{
+	idx &= MAX_PHASE;
+	return phase_map & (1 << idx);
+}
+
+static int get_phase_len(u32 phase_map, unsigned int idx)
+{
+	int i;
+
+	for (i = 0; i < MAX_PHASE + 1; i++) {
+		if (get_phase_point(phase_map, idx + i) == 0)
+			return i;
+	}
+	return MAX_PHASE + 1;
+}
+
+static u8 sd_search_final_phase(struct rtsx_usb_sdmmc *host, u32 phase_map)
+{
+	int start = 0, len = 0;
+	int start_final = 0, len_final = 0;
+	u8 final_phase = 0xFF;
+
+	if (phase_map == 0) {
+		dev_dbg(sdmmc_dev(host), "Phase: [map:%x]\n", phase_map);
+		return final_phase;
+	}
+
+	while (start < MAX_PHASE + 1) {
+		len = get_phase_len(phase_map, start);
+		if (len_final < len) {
+			start_final = start;
+			len_final = len;
+		}
+		start += len ? len : 1;
+	}
+
+	final_phase = (start_final + len_final / 2) & MAX_PHASE;
+	dev_dbg(sdmmc_dev(host), "Phase: [map:%x] [maxlen:%d] [final:%d]\n",
+		phase_map, len_final, final_phase);
+
+	return final_phase;
+}
+
+static void sd_wait_data_idle(struct rtsx_usb_sdmmc *host)
+{
+	int err, i;
+	u8 val = 0;
+
+	for (i = 0; i < 100; i++) {
+		err = rtsx_usb_ep0_read_register(host->ucr,
+				SD_DATA_STATE, &val);
+		if (val & SD_DATA_IDLE)
+			return;
+
+		usleep_range(100, 1000);
+	}
+}
+
+static int sd_tuning_rx_cmd(struct rtsx_usb_sdmmc *host,
+		u8 opcode, u8 sample_point)
+{
+	int err;
+	struct mmc_command cmd = {0};
+
+	err = sd_change_phase(host, sample_point, 0);
+	if (err)
+		return err;
+
+	cmd.opcode = MMC_SEND_TUNING_BLOCK;
+	err = sd_read_data(host, &cmd, 0x40, NULL, 0, 100);
+	if (err) {
+		/* Wait till SD DATA IDLE */
+		sd_wait_data_idle(host);
+		sd_clear_error(host);
+		return err;
+	}
+
+	return 0;
+}
+
+static void sd_tuning_phase(struct rtsx_usb_sdmmc *host,
+		u8 opcode, u16 *phase_map)
+{
+	int err, i;
+	u16 raw_phase_map = 0;
+
+	for (i = MAX_PHASE; i >= 0; i--) {
+		err = sd_tuning_rx_cmd(host, opcode, (u8)i);
+		if (!err)
+			raw_phase_map |= 1 << i;
+	}
+
+	if (phase_map)
+		*phase_map = raw_phase_map;
+}
+
+static int sd_tuning_rx(struct rtsx_usb_sdmmc *host, u8 opcode)
+{
+	int err, i;
+	u16 raw_phase_map[RX_TUNING_CNT] = {0}, phase_map;
+	u8 final_phase;
+
+	/* setting fixed default TX phase */
+	err = sd_change_phase(host, 0x01, 1);
+	if (err) {
+		dev_dbg(sdmmc_dev(host), "TX phase setting failed\n");
+		return err;
+	}
+
+	/* tuning RX phase */
+	for (i = 0; i < RX_TUNING_CNT; i++) {
+		sd_tuning_phase(host, opcode, &(raw_phase_map[i]));
+
+		if (raw_phase_map[i] == 0)
+			break;
+	}
+
+	phase_map = 0xFFFF;
+	for (i = 0; i < RX_TUNING_CNT; i++) {
+		dev_dbg(sdmmc_dev(host), "RX raw_phase_map[%d] = 0x%04x\n",
+				i, raw_phase_map[i]);
+		phase_map &= raw_phase_map[i];
+	}
+	dev_dbg(sdmmc_dev(host), "RX phase_map = 0x%04x\n", phase_map);
+
+	if (phase_map) {
+		final_phase = sd_search_final_phase(host, phase_map);
+		if (final_phase == 0xFF)
+			return -EINVAL;
+
+		err = sd_change_phase(host, final_phase, 0);
+		if (err)
+			return err;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sdmmc_get_ro(struct mmc_host *mmc)
+{
+	struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+	u16 val;
+
+	if (host->host_removal)
+		return -ENOMEDIUM;
+
+	mutex_lock(&ucr->dev_mutex);
+
+	/* Check SD card detect */
+	err = rtsx_usb_get_card_status(ucr, &val);
+
+	mutex_unlock(&ucr->dev_mutex);
+
+
+	/* Treat failed detection as non-ro */
+	if (err)
+		return 0;
+
+	if (val & SD_WP)
+		return 1;
+
+	return 0;
+}
+
+static int sdmmc_get_cd(struct mmc_host *mmc)
+{
+	struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+	u16 val;
+
+	if (host->host_removal)
+		return -ENOMEDIUM;
+
+	mutex_lock(&ucr->dev_mutex);
+
+	/* Check SD card detect */
+	err = rtsx_usb_get_card_status(ucr, &val);
+
+	mutex_unlock(&ucr->dev_mutex);
+
+	/* Treat failed detection as non-exist */
+	if (err)
+		goto no_card;
+
+	if (val & SD_CD) {
+		host->card_exist = true;
+		return 1;
+	}
+
+no_card:
+	host->card_exist = false;
+	return 0;
+}
+
+static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_ucr *ucr = host->ucr;
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_data *data = mrq->data;
+	unsigned int data_size = 0;
+
+	dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+
+	if (host->host_removal) {
+		cmd->error = -ENOMEDIUM;
+		goto finish;
+	}
+
+	if ((!host->card_exist)) {
+		cmd->error = -ENOMEDIUM;
+		goto finish_detect_card;
+	}
+
+	/*
+	 * Reject SDIO CMDs to speed up card identification
+	 * since unsupported
+	 */
+	if (cmd->opcode == SD_IO_SEND_OP_COND ||
+	    cmd->opcode == SD_IO_RW_DIRECT ||
+	    cmd->opcode == SD_IO_RW_EXTENDED) {
+		cmd->error = -EINVAL;
+		goto finish;
+	}
+
+	mutex_lock(&ucr->dev_mutex);
+
+	mutex_lock(&host->host_mutex);
+	host->mrq = mrq;
+	mutex_unlock(&host->host_mutex);
+
+	if (mrq->data)
+		data_size = data->blocks * data->blksz;
+
+	if (!data_size) {
+		sd_send_cmd_get_rsp(host, cmd);
+	} else if ((!(data_size % 512) && cmd->opcode != MMC_SEND_EXT_CSD) ||
+		   mmc_op_multi(cmd->opcode)) {
+		sd_send_cmd_get_rsp(host, cmd);
+
+		if (!cmd->error) {
+			sd_rw_multi(host, mrq);
+
+			if (mmc_op_multi(cmd->opcode) && mrq->stop) {
+				sd_send_cmd_get_rsp(host, mrq->stop);
+				rtsx_usb_write_register(ucr, MC_FIFO_CTL,
+						FIFO_FLUSH, FIFO_FLUSH);
+			}
+		}
+	} else {
+		sd_normal_rw(host, mrq);
+	}
+
+	if (mrq->data) {
+		if (cmd->error || data->error)
+			data->bytes_xfered = 0;
+		else
+			data->bytes_xfered = data->blocks * data->blksz;
+	}
+
+	mutex_unlock(&ucr->dev_mutex);
+
+finish_detect_card:
+	if (cmd->error) {
+		/*
+		 * detect card when fail to update card existence state and
+		 * speed up card removal when retry
+		 */
+		sdmmc_get_cd(mmc);
+		dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error);
+	}
+
+finish:
+	mutex_lock(&host->host_mutex);
+	host->mrq = NULL;
+	mutex_unlock(&host->host_mutex);
+
+	mmc_request_done(mmc, mrq);
+}
+
+static int sd_set_bus_width(struct rtsx_usb_sdmmc *host,
+		unsigned char bus_width)
+{
+	int err = 0;
+	u8 width[] = {
+		[MMC_BUS_WIDTH_1] = SD_BUS_WIDTH_1BIT,
+		[MMC_BUS_WIDTH_4] = SD_BUS_WIDTH_4BIT,
+		[MMC_BUS_WIDTH_8] = SD_BUS_WIDTH_8BIT,
+	};
+
+	if (bus_width <= MMC_BUS_WIDTH_8)
+		err = rtsx_usb_write_register(host->ucr, SD_CFG1,
+				0x03, width[bus_width]);
+
+	return err;
+}
+
+static int sd_pull_ctl_disable_lqfp48(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_pull_ctl_disable_qfn24(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0x65);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0x95);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x56);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x59);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_pull_ctl_enable_lqfp48(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xAA);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0xAA);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA9);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x55);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0xA5);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_pull_ctl_enable_qfn24(struct rtsx_ucr *ucr)
+{
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL1, 0xFF, 0xA5);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL2, 0xFF, 0x9A);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL3, 0xFF, 0xA5);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL4, 0xFF, 0x9A);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL5, 0xFF, 0x65);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PULL_CTL6, 0xFF, 0x5A);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_power_on(struct rtsx_usb_sdmmc *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+
+	dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SELECT, 0x07, SD_MOD_SEL);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_SHARE_MODE,
+			CARD_SHARE_MASK, CARD_SHARE_SD);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN,
+			SD_CLK_EN, SD_CLK_EN);
+	err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+	if (err)
+		return err;
+
+	if (CHECK_PKG(ucr, LQFP48))
+		err = sd_pull_ctl_enable_lqfp48(ucr);
+	else
+		err = sd_pull_ctl_enable_qfn24(ucr);
+	if (err)
+		return err;
+
+	err = rtsx_usb_write_register(ucr, CARD_PWR_CTL,
+			POWER_MASK, PARTIAL_POWER_ON);
+	if (err)
+		return err;
+
+	usleep_range(800, 1000);
+
+	rtsx_usb_init_cmd(ucr);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+			POWER_MASK|LDO3318_PWR_MASK, POWER_ON|LDO_ON);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE,
+			SD_OUTPUT_EN, SD_OUTPUT_EN);
+
+	return rtsx_usb_send_cmd(ucr, MODE_C, 100);
+}
+
+static int sd_power_off(struct rtsx_usb_sdmmc *host)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+
+	dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+	rtsx_usb_init_cmd(ucr);
+
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_EN, SD_CLK_EN, 0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_OE, SD_OUTPUT_EN, 0);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+			POWER_MASK, POWER_OFF);
+	rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_PWR_CTL,
+			POWER_MASK|LDO3318_PWR_MASK, POWER_OFF|LDO_SUSPEND);
+
+	err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+	if (err)
+		return err;
+
+	if (CHECK_PKG(ucr, LQFP48))
+			return sd_pull_ctl_disable_lqfp48(ucr);
+	return sd_pull_ctl_disable_qfn24(ucr);
+}
+
+static int sd_set_power_mode(struct rtsx_usb_sdmmc *host,
+		unsigned char power_mode)
+{
+	int err;
+
+	if (power_mode != MMC_POWER_OFF)
+		power_mode = MMC_POWER_ON;
+
+	if (power_mode == host->power_mode)
+		return 0;
+
+	if (power_mode == MMC_POWER_OFF) {
+		err = sd_power_off(host);
+		pm_runtime_put(sdmmc_dev(host));
+	} else {
+		pm_runtime_get_sync(sdmmc_dev(host));
+		err = sd_power_on(host);
+	}
+
+	if (!err)
+		host->power_mode = power_mode;
+
+	return err;
+}
+
+static int sd_set_timing(struct rtsx_usb_sdmmc *host,
+		unsigned char timing, bool *ddr_mode)
+{
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+
+	*ddr_mode = false;
+
+	rtsx_usb_init_cmd(ucr);
+
+	switch (timing) {
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_UHS_SDR50:
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1,
+				0x0C | SD_ASYNC_FIFO_RST,
+				SD_30_MODE | SD_ASYNC_FIFO_RST);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+				CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
+		break;
+
+	case MMC_TIMING_UHS_DDR50:
+		*ddr_mode = true;
+
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1,
+				0x0C | SD_ASYNC_FIFO_RST,
+				SD_DDR_MODE | SD_ASYNC_FIFO_RST);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+				CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL,
+				DDR_VAR_TX_CMD_DAT, DDR_VAR_TX_CMD_DAT);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+				DDR_VAR_RX_DAT | DDR_VAR_RX_CMD,
+				DDR_VAR_RX_DAT | DDR_VAR_RX_CMD);
+		break;
+
+	case MMC_TIMING_MMC_HS:
+	case MMC_TIMING_SD_HS:
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_CFG1,
+				0x0C, SD_20_MODE);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+				CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PUSH_POINT_CTL,
+				SD20_TX_SEL_MASK, SD20_TX_14_AHEAD);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+				SD20_RX_SEL_MASK, SD20_RX_14_DELAY);
+		break;
+
+	default:
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_CFG1, 0x0C, SD_20_MODE);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, CARD_CLK_SOURCE, 0xFF,
+				CRC_FIX_CLK | SD30_VAR_CLK0 | SAMPLE_VAR_CLK1);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD,
+				SD_PUSH_POINT_CTL, 0xFF, 0);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_SAMPLE_POINT_CTL,
+				SD20_RX_SEL_MASK, SD20_RX_POS_EDGE);
+		break;
+	}
+
+	err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+
+	return err;
+}
+
+static void sdmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_ucr *ucr = host->ucr;
+
+	dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+	mutex_lock(&ucr->dev_mutex);
+
+	if (rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD)) {
+		mutex_unlock(&ucr->dev_mutex);
+		return;
+	}
+
+	sd_set_power_mode(host, ios->power_mode);
+	sd_set_bus_width(host, ios->bus_width);
+	sd_set_timing(host, ios->timing, &host->ddr_mode);
+
+	host->vpclk = false;
+	host->double_clk = true;
+
+	switch (ios->timing) {
+	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_UHS_SDR50:
+		host->ssc_depth = SSC_DEPTH_2M;
+		host->vpclk = true;
+		host->double_clk = false;
+		break;
+	case MMC_TIMING_UHS_DDR50:
+	case MMC_TIMING_UHS_SDR25:
+		host->ssc_depth = SSC_DEPTH_1M;
+		break;
+	default:
+		host->ssc_depth = SSC_DEPTH_512K;
+		break;
+	}
+
+	host->initial_mode = (ios->clock <= 1000000) ? true : false;
+	host->clock = ios->clock;
+
+	rtsx_usb_switch_clock(host->ucr, host->clock, host->ssc_depth,
+			host->initial_mode, host->double_clk, host->vpclk);
+
+	mutex_unlock(&ucr->dev_mutex);
+	dev_dbg(sdmmc_dev(host), "%s end\n", __func__);
+}
+
+static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_ucr *ucr = host->ucr;
+	int err = 0;
+
+	dev_dbg(sdmmc_dev(host), "%s: signal_voltage = %d\n",
+			__func__, ios->signal_voltage);
+
+	if (host->host_removal)
+		return -ENOMEDIUM;
+
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_120)
+		return -EPERM;
+
+	mutex_lock(&ucr->dev_mutex);
+
+	err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_SD_CARD);
+	if (err) {
+		mutex_unlock(&ucr->dev_mutex);
+		return err;
+	}
+
+	/* Let mmc core do the busy checking, simply stop the forced-toggle
+	 * clock(while issuing CMD11) and switch voltage.
+	 */
+	rtsx_usb_init_cmd(ucr);
+
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL,
+				SD_IO_USING_1V8, SD_IO_USING_3V3);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG,
+				TUNE_SD18_MASK, TUNE_SD18_3V3);
+	} else {
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_BUS_STAT,
+				SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP,
+				SD_CLK_FORCE_STOP);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, SD_PAD_CTL,
+				SD_IO_USING_1V8, SD_IO_USING_1V8);
+		rtsx_usb_add_cmd(ucr, WRITE_REG_CMD, LDO_POWER_CFG,
+				TUNE_SD18_MASK, TUNE_SD18_1V8);
+	}
+
+	err = rtsx_usb_send_cmd(ucr, MODE_C, 100);
+	mutex_unlock(&ucr->dev_mutex);
+
+	return err;
+}
+
+static int sdmmc_card_busy(struct mmc_host *mmc)
+{
+	struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_ucr *ucr = host->ucr;
+	int err;
+	u8 stat;
+	u8 mask = SD_DAT3_STATUS | SD_DAT2_STATUS | SD_DAT1_STATUS
+		| SD_DAT0_STATUS;
+
+	dev_dbg(sdmmc_dev(host), "%s\n", __func__);
+
+	mutex_lock(&ucr->dev_mutex);
+
+	err = rtsx_usb_write_register(ucr, SD_BUS_STAT,
+			SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP,
+			SD_CLK_TOGGLE_EN);
+	if (err)
+		goto out;
+
+	mdelay(1);
+
+	err = rtsx_usb_read_register(ucr, SD_BUS_STAT, &stat);
+	if (err)
+		goto out;
+
+	err = rtsx_usb_write_register(ucr, SD_BUS_STAT,
+			SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+out:
+	mutex_unlock(&ucr->dev_mutex);
+
+	if (err)
+		return err;
+
+	/* check if any pin between dat[0:3] is low */
+	if ((stat & mask) != mask)
+		return 1;
+	else
+		return 0;
+}
+
+static int sdmmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct rtsx_usb_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_ucr *ucr = host->ucr;
+	int err = 0;
+
+	if (host->host_removal)
+		return -ENOMEDIUM;
+
+	mutex_lock(&ucr->dev_mutex);
+
+	if (!host->ddr_mode)
+		err = sd_tuning_rx(host, MMC_SEND_TUNING_BLOCK);
+
+	mutex_unlock(&ucr->dev_mutex);
+
+	return err;
+}
+
+static const struct mmc_host_ops rtsx_usb_sdmmc_ops = {
+	.request = sdmmc_request,
+	.set_ios = sdmmc_set_ios,
+	.get_ro = sdmmc_get_ro,
+	.get_cd = sdmmc_get_cd,
+	.start_signal_voltage_switch = sdmmc_switch_voltage,
+	.card_busy = sdmmc_card_busy,
+	.execute_tuning = sdmmc_execute_tuning,
+};
+
+#ifdef RTSX_USB_USE_LEDS_CLASS
+static void rtsx_usb_led_control(struct led_classdev *led,
+	enum led_brightness brightness)
+{
+	struct rtsx_usb_sdmmc *host = container_of(led,
+			struct rtsx_usb_sdmmc, led);
+
+	if (host->host_removal)
+		return;
+
+	host->led.brightness = brightness;
+	schedule_work(&host->led_work);
+}
+
+static void rtsx_usb_update_led(struct work_struct *work)
+{
+	struct rtsx_usb_sdmmc *host =
+		container_of(work, struct rtsx_usb_sdmmc, led_work);
+	struct rtsx_ucr *ucr = host->ucr;
+
+	mutex_lock(&ucr->dev_mutex);
+
+	if (host->led.brightness == LED_OFF)
+		rtsx_usb_turn_off_led(ucr);
+	else
+		rtsx_usb_turn_on_led(ucr);
+
+	mutex_unlock(&ucr->dev_mutex);
+}
+#endif
+
+static void rtsx_usb_init_host(struct rtsx_usb_sdmmc *host)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	mmc->f_min = 250000;
+	mmc->f_max = 208000000;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+	mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
+		MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
+		MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR50 |
+		MMC_CAP_NEEDS_POLL;
+
+	mmc->max_current_330 = 400;
+	mmc->max_current_180 = 800;
+	mmc->ops = &rtsx_usb_sdmmc_ops;
+	mmc->max_segs = 256;
+	mmc->max_seg_size = 65536;
+	mmc->max_blk_size = 512;
+	mmc->max_blk_count = 65535;
+	mmc->max_req_size = 524288;
+
+	host->power_mode = MMC_POWER_OFF;
+}
+
+static int rtsx_usb_sdmmc_drv_probe(struct platform_device *pdev)
+{
+	struct mmc_host *mmc;
+	struct rtsx_usb_sdmmc *host;
+	struct rtsx_ucr *ucr;
+#ifdef RTSX_USB_USE_LEDS_CLASS
+	int err;
+#endif
+
+	ucr = usb_get_intfdata(to_usb_interface(pdev->dev.parent));
+	if (!ucr)
+		return -ENXIO;
+
+	dev_dbg(&(pdev->dev), ": Realtek USB SD/MMC controller found\n");
+
+	mmc = mmc_alloc_host(sizeof(*host), &pdev->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	host = mmc_priv(mmc);
+	host->ucr = ucr;
+	host->mmc = mmc;
+	host->pdev = pdev;
+	platform_set_drvdata(pdev, host);
+
+	mutex_init(&host->host_mutex);
+	rtsx_usb_init_host(host);
+	pm_runtime_enable(&pdev->dev);
+
+#ifdef RTSX_USB_USE_LEDS_CLASS
+	snprintf(host->led_name, sizeof(host->led_name),
+		"%s::", mmc_hostname(mmc));
+	host->led.name = host->led_name;
+	host->led.brightness = LED_OFF;
+	host->led.default_trigger = mmc_hostname(mmc);
+	host->led.brightness_set = rtsx_usb_led_control;
+
+	err = led_classdev_register(mmc_dev(mmc), &host->led);
+	if (err)
+		dev_err(&(pdev->dev),
+				"Failed to register LED device: %d\n", err);
+	INIT_WORK(&host->led_work, rtsx_usb_update_led);
+
+#endif
+	mmc_add_host(mmc);
+
+	return 0;
+}
+
+static int rtsx_usb_sdmmc_drv_remove(struct platform_device *pdev)
+{
+	struct rtsx_usb_sdmmc *host = platform_get_drvdata(pdev);
+	struct mmc_host *mmc;
+
+	if (!host)
+		return 0;
+
+	mmc = host->mmc;
+	host->host_removal = true;
+
+	mutex_lock(&host->host_mutex);
+	if (host->mrq) {
+		dev_dbg(&(pdev->dev),
+			"%s: Controller removed during transfer\n",
+			mmc_hostname(mmc));
+		host->mrq->cmd->error = -ENOMEDIUM;
+		if (host->mrq->stop)
+			host->mrq->stop->error = -ENOMEDIUM;
+		mmc_request_done(mmc, host->mrq);
+	}
+	mutex_unlock(&host->host_mutex);
+
+	mmc_remove_host(mmc);
+
+#ifdef RTSX_USB_USE_LEDS_CLASS
+	cancel_work_sync(&host->led_work);
+	led_classdev_unregister(&host->led);
+#endif
+
+	mmc_free_host(mmc);
+	pm_runtime_disable(&pdev->dev);
+	platform_set_drvdata(pdev, NULL);
+
+	dev_dbg(&(pdev->dev),
+		": Realtek USB SD/MMC module has been removed\n");
+
+	return 0;
+}
+
+static struct platform_device_id rtsx_usb_sdmmc_ids[] = {
+	{
+		.name = "rtsx_usb_sdmmc",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, rtsx_usb_sdmmc_ids);
+
+static struct platform_driver rtsx_usb_sdmmc_driver = {
+	.probe		= rtsx_usb_sdmmc_drv_probe,
+	.remove		= rtsx_usb_sdmmc_drv_remove,
+	.id_table       = rtsx_usb_sdmmc_ids,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "rtsx_usb_sdmmc",
+	},
+};
+module_platform_driver(rtsx_usb_sdmmc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Roger Tseng <rogerable@realtek.com>");
+MODULE_DESCRIPTION("Realtek USB SD/MMC Card Host Driver");
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 476af93543f..8ec2d6a1dbe 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -40,6 +40,7 @@
 
 struct s5m_rtc_info {
 	struct device *dev;
+	struct i2c_client *i2c;
 	struct sec_pmic_dev *s5m87xx;
 	struct regmap *regmap;
 	struct rtc_device *rtc_dev;
@@ -49,6 +50,20 @@ struct s5m_rtc_info {
 	bool wtsr_smpl;
 };
 
+static const struct regmap_config s5m_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SEC_RTC_REG_MAX,
+};
+
+static const struct regmap_config s2mps14_rtc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS_RTC_REG_MAX,
+};
+
 static void s5m8767_data_to_tm(u8 *data, struct rtc_time *tm,
 			       int rtc_24hr_mode)
 {
@@ -554,6 +569,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	struct sec_pmic_dev *s5m87xx = dev_get_drvdata(pdev->dev.parent);
 	struct sec_platform_data *pdata = s5m87xx->pdata;
 	struct s5m_rtc_info *info;
+	const struct regmap_config *regmap_cfg;
 	int ret;
 
 	if (!pdata) {
@@ -565,9 +581,37 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	switch (pdata->device_type) {
+	case S2MPS14X:
+		regmap_cfg = &s2mps14_rtc_regmap_config;
+		break;
+	case S5M8763X:
+		regmap_cfg = &s5m_rtc_regmap_config;
+		break;
+	case S5M8767X:
+		regmap_cfg = &s5m_rtc_regmap_config;
+		break;
+	default:
+		dev_err(&pdev->dev, "Device type is not supported by RTC driver\n");
+		return -ENODEV;
+	}
+
+	info->i2c = i2c_new_dummy(s5m87xx->i2c->adapter, RTC_I2C_ADDR);
+	if (!info->i2c) {
+		dev_err(&pdev->dev, "Failed to allocate I2C for RTC\n");
+		return -ENODEV;
+	}
+
+	info->regmap = devm_regmap_init_i2c(info->i2c, regmap_cfg);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(&pdev->dev, "Failed to allocate RTC register map: %d\n",
+				ret);
+		goto err;
+	}
+
 	info->dev = &pdev->dev;
 	info->s5m87xx = s5m87xx;
-	info->regmap = s5m87xx->regmap_rtc;
 	info->device_type = s5m87xx->device_type;
 	info->wtsr_smpl = s5m87xx->wtsr_smpl;
 
@@ -585,7 +629,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	default:
 		ret = -EINVAL;
 		dev_err(&pdev->dev, "Unsupported device type: %d\n", ret);
-		return ret;
+		goto err;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -602,15 +646,24 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc",
 						 &s5m_rtc_ops, THIS_MODULE);
 
-	if (IS_ERR(info->rtc_dev))
-		return PTR_ERR(info->rtc_dev);
+	if (IS_ERR(info->rtc_dev)) {
+		ret = PTR_ERR(info->rtc_dev);
+		goto err;
+	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
 					s5m_rtc_alarm_irq, 0, "rtc-alarm0",
 					info);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
 			info->irq, ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	i2c_unregister_device(info->i2c);
 
 	return ret;
 }
@@ -639,6 +692,17 @@ static void s5m_rtc_shutdown(struct platform_device *pdev)
 	s5m_rtc_enable_smpl(info, false);
 }
 
+static int s5m_rtc_remove(struct platform_device *pdev)
+{
+	struct s5m_rtc_info *info = platform_get_drvdata(pdev);
+
+	/* Perform also all shutdown steps when removing */
+	s5m_rtc_shutdown(pdev);
+	i2c_unregister_device(info->i2c);
+
+	return 0;
+}
+
 #ifdef CONFIG_PM_SLEEP
 static int s5m_rtc_resume(struct device *dev)
 {
@@ -676,6 +740,7 @@ static struct platform_driver s5m_rtc_driver = {
 		.pm	= &s5m_rtc_pm_ops,
 	},
 	.probe		= s5m_rtc_probe,
+	.remove		= s5m_rtc_remove,
 	.shutdown	= s5m_rtc_shutdown,
 	.id_table	= s5m_rtc_id,
 };
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 3301b2031c8..552cc1d61cc 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -330,7 +330,6 @@ int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
 int abx500_get_chip_id(struct device *dev);
 int abx500_event_registers_startup_state_get(struct device *dev, u8 *event);
 int abx500_startup_irq_enabled(struct device *dev, unsigned int irq);
-void abx500_dump_all_banks(void);
 
 struct abx500_ops {
 	int (*get_chip_id) (struct device *);
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index 7b35c21170d..7204d8138b2 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -42,12 +42,14 @@
 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_2    0x62
 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_3    0x63
 #define ARIZONA_SAMPLE_RATE_SEQUENCE_SELECT_4    0x64
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1 0x68
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2 0x69
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3 0x6A
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4 0x6B
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5 0x6C
-#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6 0x6D
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_1 0x66
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_2 0x67
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_3 0x68
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_4 0x69
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_5 0x6A
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_6 0x6B
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_7 0x6C
+#define ARIZONA_ALWAYS_ON_TRIGGERS_SEQUENCE_SELECT_8 0x6D
 #define ARIZONA_COMFORT_NOISE_GENERATOR          0x70
 #define ARIZONA_HAPTICS_CONTROL_1                0x90
 #define ARIZONA_HAPTICS_CONTROL_2                0x91
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
new file mode 100644
index 00000000000..d0e31a2287a
--- /dev/null
+++ b/include/linux/mfd/axp20x.h
@@ -0,0 +1,180 @@
+/*
+ * Functions and registers to access AXP20X power management chip.
+ *
+ * Copyright (C) 2013, Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_AXP20X_H
+#define __LINUX_MFD_AXP20X_H
+
+enum {
+	AXP202_ID = 0,
+	AXP209_ID,
+};
+
+#define AXP20X_DATACACHE(m)		(0x04 + (m))
+
+/* Power supply */
+#define AXP20X_PWR_INPUT_STATUS		0x00
+#define AXP20X_PWR_OP_MODE		0x01
+#define AXP20X_USB_OTG_STATUS		0x02
+#define AXP20X_PWR_OUT_CTRL		0x12
+#define AXP20X_DCDC2_V_OUT		0x23
+#define AXP20X_DCDC2_LDO3_V_SCAL	0x25
+#define AXP20X_DCDC3_V_OUT		0x27
+#define AXP20X_LDO24_V_OUT		0x28
+#define AXP20X_LDO3_V_OUT		0x29
+#define AXP20X_VBUS_IPSOUT_MGMT		0x30
+#define AXP20X_V_OFF			0x31
+#define AXP20X_OFF_CTRL			0x32
+#define AXP20X_CHRG_CTRL1		0x33
+#define AXP20X_CHRG_CTRL2		0x34
+#define AXP20X_CHRG_BAK_CTRL		0x35
+#define AXP20X_PEK_KEY			0x36
+#define AXP20X_DCDC_FREQ		0x37
+#define AXP20X_V_LTF_CHRG		0x38
+#define AXP20X_V_HTF_CHRG		0x39
+#define AXP20X_APS_WARN_L1		0x3a
+#define AXP20X_APS_WARN_L2		0x3b
+#define AXP20X_V_LTF_DISCHRG		0x3c
+#define AXP20X_V_HTF_DISCHRG		0x3d
+
+/* Interrupt */
+#define AXP20X_IRQ1_EN			0x40
+#define AXP20X_IRQ2_EN			0x41
+#define AXP20X_IRQ3_EN			0x42
+#define AXP20X_IRQ4_EN			0x43
+#define AXP20X_IRQ5_EN			0x44
+#define AXP20X_IRQ1_STATE		0x48
+#define AXP20X_IRQ2_STATE		0x49
+#define AXP20X_IRQ3_STATE		0x4a
+#define AXP20X_IRQ4_STATE		0x4b
+#define AXP20X_IRQ5_STATE		0x4c
+
+/* ADC */
+#define AXP20X_ACIN_V_ADC_H		0x56
+#define AXP20X_ACIN_V_ADC_L		0x57
+#define AXP20X_ACIN_I_ADC_H		0x58
+#define AXP20X_ACIN_I_ADC_L		0x59
+#define AXP20X_VBUS_V_ADC_H		0x5a
+#define AXP20X_VBUS_V_ADC_L		0x5b
+#define AXP20X_VBUS_I_ADC_H		0x5c
+#define AXP20X_VBUS_I_ADC_L		0x5d
+#define AXP20X_TEMP_ADC_H		0x5e
+#define AXP20X_TEMP_ADC_L		0x5f
+#define AXP20X_TS_IN_H			0x62
+#define AXP20X_TS_IN_L			0x63
+#define AXP20X_GPIO0_V_ADC_H		0x64
+#define AXP20X_GPIO0_V_ADC_L		0x65
+#define AXP20X_GPIO1_V_ADC_H		0x66
+#define AXP20X_GPIO1_V_ADC_L		0x67
+#define AXP20X_PWR_BATT_H		0x70
+#define AXP20X_PWR_BATT_M		0x71
+#define AXP20X_PWR_BATT_L		0x72
+#define AXP20X_BATT_V_H			0x78
+#define AXP20X_BATT_V_L			0x79
+#define AXP20X_BATT_CHRG_I_H		0x7a
+#define AXP20X_BATT_CHRG_I_L		0x7b
+#define AXP20X_BATT_DISCHRG_I_H		0x7c
+#define AXP20X_BATT_DISCHRG_I_L		0x7d
+#define AXP20X_IPSOUT_V_HIGH_H		0x7e
+#define AXP20X_IPSOUT_V_HIGH_L		0x7f
+
+/* Power supply */
+#define AXP20X_DCDC_MODE		0x80
+#define AXP20X_ADC_EN1			0x82
+#define AXP20X_ADC_EN2			0x83
+#define AXP20X_ADC_RATE			0x84
+#define AXP20X_GPIO10_IN_RANGE		0x85
+#define AXP20X_GPIO1_ADC_IRQ_RIS	0x86
+#define AXP20X_GPIO1_ADC_IRQ_FAL	0x87
+#define AXP20X_TIMER_CTRL		0x8a
+#define AXP20X_VBUS_MON			0x8b
+#define AXP20X_OVER_TMP			0x8f
+
+/* GPIO */
+#define AXP20X_GPIO0_CTRL		0x90
+#define AXP20X_LDO5_V_OUT		0x91
+#define AXP20X_GPIO1_CTRL		0x92
+#define AXP20X_GPIO2_CTRL		0x93
+#define AXP20X_GPIO20_SS		0x94
+#define AXP20X_GPIO3_CTRL		0x95
+
+/* Battery */
+#define AXP20X_CHRG_CC_31_24		0xb0
+#define AXP20X_CHRG_CC_23_16		0xb1
+#define AXP20X_CHRG_CC_15_8		0xb2
+#define AXP20X_CHRG_CC_7_0		0xb3
+#define AXP20X_DISCHRG_CC_31_24		0xb4
+#define AXP20X_DISCHRG_CC_23_16		0xb5
+#define AXP20X_DISCHRG_CC_15_8		0xb6
+#define AXP20X_DISCHRG_CC_7_0		0xb7
+#define AXP20X_CC_CTRL			0xb8
+#define AXP20X_FG_RES			0xb9
+
+/* Regulators IDs */
+enum {
+	AXP20X_LDO1 = 0,
+	AXP20X_LDO2,
+	AXP20X_LDO3,
+	AXP20X_LDO4,
+	AXP20X_LDO5,
+	AXP20X_DCDC2,
+	AXP20X_DCDC3,
+	AXP20X_REG_ID_MAX,
+};
+
+/* IRQs */
+enum {
+	AXP20X_IRQ_ACIN_OVER_V = 1,
+	AXP20X_IRQ_ACIN_PLUGIN,
+	AXP20X_IRQ_ACIN_REMOVAL,
+	AXP20X_IRQ_VBUS_OVER_V,
+	AXP20X_IRQ_VBUS_PLUGIN,
+	AXP20X_IRQ_VBUS_REMOVAL,
+	AXP20X_IRQ_VBUS_V_LOW,
+	AXP20X_IRQ_BATT_PLUGIN,
+	AXP20X_IRQ_BATT_REMOVAL,
+	AXP20X_IRQ_BATT_ENT_ACT_MODE,
+	AXP20X_IRQ_BATT_EXIT_ACT_MODE,
+	AXP20X_IRQ_CHARG,
+	AXP20X_IRQ_CHARG_DONE,
+	AXP20X_IRQ_BATT_TEMP_HIGH,
+	AXP20X_IRQ_BATT_TEMP_LOW,
+	AXP20X_IRQ_DIE_TEMP_HIGH,
+	AXP20X_IRQ_CHARG_I_LOW,
+	AXP20X_IRQ_DCDC1_V_LONG,
+	AXP20X_IRQ_DCDC2_V_LONG,
+	AXP20X_IRQ_DCDC3_V_LONG,
+	AXP20X_IRQ_PEK_SHORT = 22,
+	AXP20X_IRQ_PEK_LONG,
+	AXP20X_IRQ_N_OE_PWR_ON,
+	AXP20X_IRQ_N_OE_PWR_OFF,
+	AXP20X_IRQ_VBUS_VALID,
+	AXP20X_IRQ_VBUS_NOT_VALID,
+	AXP20X_IRQ_VBUS_SESS_VALID,
+	AXP20X_IRQ_VBUS_SESS_END,
+	AXP20X_IRQ_LOW_PWR_LVL1,
+	AXP20X_IRQ_LOW_PWR_LVL2,
+	AXP20X_IRQ_TIMER,
+	AXP20X_IRQ_PEK_RIS_EDGE,
+	AXP20X_IRQ_PEK_FAL_EDGE,
+	AXP20X_IRQ_GPIO3_INPUT,
+	AXP20X_IRQ_GPIO2_INPUT,
+	AXP20X_IRQ_GPIO1_INPUT,
+	AXP20X_IRQ_GPIO0_INPUT,
+};
+
+struct axp20x_dev {
+	struct device			*dev;
+	struct i2c_client		*i2c_client;
+	struct regmap			*regmap;
+	struct regmap_irq_chip_data	*regmap_irqc;
+	long				variant;
+};
+
+#endif /* __LINUX_MFD_AXP20X_H */
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 032af7fc5b2..887ef4f7bef 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -29,8 +29,8 @@ enum {
 	EC_MSG_RX_PROTO_BYTES	= 3,
 
 	/* Max length of messages */
-	EC_MSG_BYTES		= EC_HOST_PARAM_SIZE + EC_MSG_TX_PROTO_BYTES,
-
+	EC_MSG_BYTES		= EC_PROTO2_MAX_PARAM_SIZE +
+					EC_MSG_TX_PROTO_BYTES,
 };
 
 /**
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 86fd06953bc..7853a6410d1 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -24,25 +24,12 @@
 #define __CROS_EC_COMMANDS_H
 
 /*
- * Protocol overview
+ * Current version of this protocol
  *
- * request:  CMD [ P0 P1 P2 ... Pn S ]
- * response: ERR [ P0 P1 P2 ... Pn S ]
- *
- * where the bytes are defined as follow :
- *      - CMD is the command code. (defined by EC_CMD_ constants)
- *      - ERR is the error code. (defined by EC_RES_ constants)
- *      - Px is the optional payload.
- *        it is not sent if the error code is not success.
- *        (defined by ec_params_ and ec_response_ structures)
- *      - S is the checksum which is the sum of all payload bytes.
- *
- * On LPC, CMD and ERR are sent/received at EC_LPC_ADDR_KERNEL|USER_CMD
- * and the payloads are sent/received at EC_LPC_ADDR_KERNEL|USER_PARAM.
- * On I2C, all bytes are sent serially in the same message.
+ * TODO(crosbug.com/p/11223): This is effectively useless; protocol is
+ * determined in other ways.  Remove this once the kernel code no longer
+ * depends on it.
  */
-
-/* Current version of this protocol */
 #define EC_PROTO_VERSION          0x00000002
 
 /* Command version mask */
@@ -57,13 +44,19 @@
 #define EC_LPC_ADDR_HOST_CMD   0x204
 
 /* I/O addresses for host command args and params */
-#define EC_LPC_ADDR_HOST_ARGS  0x800
-#define EC_LPC_ADDR_HOST_PARAM 0x804
-#define EC_HOST_PARAM_SIZE     0x0fc  /* Size of param area in bytes */
-
-/* I/O addresses for host command params, old interface */
-#define EC_LPC_ADDR_OLD_PARAM  0x880
-#define EC_OLD_PARAM_SIZE      0x080  /* Size of param area in bytes */
+/* Protocol version 2 */
+#define EC_LPC_ADDR_HOST_ARGS    0x800  /* And 0x801, 0x802, 0x803 */
+#define EC_LPC_ADDR_HOST_PARAM   0x804  /* For version 2 params; size is
+					 * EC_PROTO2_MAX_PARAM_SIZE */
+/* Protocol version 3 */
+#define EC_LPC_ADDR_HOST_PACKET  0x800  /* Offset of version 3 packet */
+#define EC_LPC_HOST_PACKET_SIZE  0x100  /* Max size of version 3 packet */
+
+/* The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff
+ * and they tell the kernel that so we have to think of it as two parts. */
+#define EC_HOST_CMD_REGION0    0x800
+#define EC_HOST_CMD_REGION1    0x880
+#define EC_HOST_CMD_REGION_SIZE 0x80
 
 /* EC command register bit functions */
 #define EC_LPC_CMDR_DATA	(1 << 0)  /* Data ready for host to read */
@@ -79,18 +72,22 @@
 #define EC_MEMMAP_TEXT_MAX     8   /* Size of a string in the memory map */
 
 /* The offset address of each type of data in mapped memory. */
-#define EC_MEMMAP_TEMP_SENSOR      0x00 /* Temp sensors */
-#define EC_MEMMAP_FAN              0x10 /* Fan speeds */
-#define EC_MEMMAP_TEMP_SENSOR_B    0x18 /* Temp sensors (second set) */
-#define EC_MEMMAP_ID               0x20 /* 'E' 'C' */
+#define EC_MEMMAP_TEMP_SENSOR      0x00 /* Temp sensors 0x00 - 0x0f */
+#define EC_MEMMAP_FAN              0x10 /* Fan speeds 0x10 - 0x17 */
+#define EC_MEMMAP_TEMP_SENSOR_B    0x18 /* More temp sensors 0x18 - 0x1f */
+#define EC_MEMMAP_ID               0x20 /* 0x20 == 'E', 0x21 == 'C' */
 #define EC_MEMMAP_ID_VERSION       0x22 /* Version of data in 0x20 - 0x2f */
 #define EC_MEMMAP_THERMAL_VERSION  0x23 /* Version of data in 0x00 - 0x1f */
 #define EC_MEMMAP_BATTERY_VERSION  0x24 /* Version of data in 0x40 - 0x7f */
 #define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */
 #define EC_MEMMAP_EVENTS_VERSION   0x26 /* Version of data in 0x34 - 0x3f */
-#define EC_MEMMAP_HOST_CMD_FLAGS   0x27 /* Host command interface flags */
-#define EC_MEMMAP_SWITCHES         0x30
-#define EC_MEMMAP_HOST_EVENTS      0x34
+#define EC_MEMMAP_HOST_CMD_FLAGS   0x27 /* Host cmd interface flags (8 bits) */
+/* Unused 0x28 - 0x2f */
+#define EC_MEMMAP_SWITCHES         0x30	/* 8 bits */
+/* Unused 0x31 - 0x33 */
+#define EC_MEMMAP_HOST_EVENTS      0x34 /* 32 bits */
+/* Reserve 0x38 - 0x3f for additional host event-related stuff */
+/* Battery values are all 32 bits */
 #define EC_MEMMAP_BATT_VOLT        0x40 /* Battery Present Voltage */
 #define EC_MEMMAP_BATT_RATE        0x44 /* Battery Present Rate */
 #define EC_MEMMAP_BATT_CAP         0x48 /* Battery Remaining Capacity */
@@ -99,10 +96,24 @@
 #define EC_MEMMAP_BATT_DVLT        0x54 /* Battery Design Voltage */
 #define EC_MEMMAP_BATT_LFCC        0x58 /* Battery Last Full Charge Capacity */
 #define EC_MEMMAP_BATT_CCNT        0x5c /* Battery Cycle Count */
+/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */
 #define EC_MEMMAP_BATT_MFGR        0x60 /* Battery Manufacturer String */
 #define EC_MEMMAP_BATT_MODEL       0x68 /* Battery Model Number String */
 #define EC_MEMMAP_BATT_SERIAL      0x70 /* Battery Serial Number String */
 #define EC_MEMMAP_BATT_TYPE        0x78 /* Battery Type String */
+#define EC_MEMMAP_ALS              0x80 /* ALS readings in lux (2 X 16 bits) */
+/* Unused 0x84 - 0x8f */
+#define EC_MEMMAP_ACC_STATUS       0x90 /* Accelerometer status (8 bits )*/
+/* Unused 0x91 */
+#define EC_MEMMAP_ACC_DATA         0x92 /* Accelerometer data 0x92 - 0x9f */
+#define EC_MEMMAP_GYRO_DATA        0xa0 /* Gyroscope data 0xa0 - 0xa5 */
+/* Unused 0xa6 - 0xfe (remember, 0xff is NOT part of the memmap region) */
+
+
+/* Define the format of the accelerometer mapped memory status byte. */
+#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK  0x0f
+#define EC_MEMMAP_ACC_STATUS_BUSY_BIT        (1 << 4)
+#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT    (1 << 7)
 
 /* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */
 #define EC_TEMP_SENSOR_ENTRIES     16
@@ -112,6 +123,8 @@
  * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2.
  */
 #define EC_TEMP_SENSOR_B_ENTRIES      8
+
+/* Special values for mapped temperature sensors */
 #define EC_TEMP_SENSOR_NOT_PRESENT    0xff
 #define EC_TEMP_SENSOR_ERROR          0xfe
 #define EC_TEMP_SENSOR_NOT_POWERED    0xfd
@@ -122,6 +135,18 @@
  */
 #define EC_TEMP_SENSOR_OFFSET      200
 
+/*
+ * Number of ALS readings at EC_MEMMAP_ALS
+ */
+#define EC_ALS_ENTRIES             2
+
+/*
+ * The default value a temperature sensor will return when it is present but
+ * has not been read this boot.  This is a reasonable number to avoid
+ * triggering alarms on the host.
+ */
+#define EC_TEMP_SENSOR_DEFAULT     (296 - EC_TEMP_SENSOR_OFFSET)
+
 #define EC_FAN_SPEED_ENTRIES       4       /* Number of fans at EC_MEMMAP_FAN */
 #define EC_FAN_SPEED_NOT_PRESENT   0xffff  /* Entry not present */
 #define EC_FAN_SPEED_STALLED       0xfffe  /* Fan stalled */
@@ -137,8 +162,8 @@
 #define EC_SWITCH_LID_OPEN               0x01
 #define EC_SWITCH_POWER_BUTTON_PRESSED   0x02
 #define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04
-/* Recovery requested via keyboard */
-#define EC_SWITCH_KEYBOARD_RECOVERY      0x08
+/* Was recovery requested via keyboard; now unused. */
+#define EC_SWITCH_IGNORE1		 0x08
 /* Recovery requested via dedicated signal (from servo board) */
 #define EC_SWITCH_DEDICATED_RECOVERY     0x10
 /* Was fake developer mode switch; now unused.  Remove in next refactor. */
@@ -147,10 +172,15 @@
 /* Host command interface flags */
 /* Host command interface supports LPC args (LPC interface only) */
 #define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED  0x01
+/* Host command interface supports version 3 protocol */
+#define EC_HOST_CMD_FLAG_VERSION_3   0x02
 
 /* Wireless switch flags */
-#define EC_WIRELESS_SWITCH_WLAN      0x01
-#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02
+#define EC_WIRELESS_SWITCH_ALL       ~0x00  /* All flags */
+#define EC_WIRELESS_SWITCH_WLAN       0x01  /* WLAN radio */
+#define EC_WIRELESS_SWITCH_BLUETOOTH  0x02  /* Bluetooth radio */
+#define EC_WIRELESS_SWITCH_WWAN       0x04  /* WWAN power */
+#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08  /* WLAN power */
 
 /*
  * This header file is used in coreboot both in C and ACPI code.  The ACPI code
@@ -159,6 +189,14 @@
  */
 #ifndef __ACPI__
 
+/*
+ * Define __packed if someone hasn't beat us to it.  Linux kernel style
+ * checking prefers __packed over __attribute__((packed)).
+ */
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+
 /* LPC command status byte masks */
 /* EC has written a byte in the data register and host hasn't read it yet */
 #define EC_LPC_STATUS_TO_HOST     0x01
@@ -198,6 +236,9 @@ enum ec_status {
 	EC_RES_UNAVAILABLE = 9,		/* No response available */
 	EC_RES_TIMEOUT = 10,		/* We got a timeout */
 	EC_RES_OVERFLOW = 11,		/* Table / data overflow */
+	EC_RES_INVALID_HEADER = 12,     /* Header contains invalid data */
+	EC_RES_REQUEST_TRUNCATED = 13,  /* Didn't get the entire request */
+	EC_RES_RESPONSE_TOO_BIG = 14    /* Response was too big to handle */
 };
 
 /*
@@ -235,6 +276,16 @@ enum host_event_code {
 	/* Shutdown due to battery level too low */
 	EC_HOST_EVENT_BATTERY_SHUTDOWN = 17,
 
+	/* Suggest that the AP throttle itself */
+	EC_HOST_EVENT_THROTTLE_START = 18,
+	/* Suggest that the AP resume normal speed */
+	EC_HOST_EVENT_THROTTLE_STOP = 19,
+
+	/* Hang detect logic detected a hang and host event timeout expired */
+	EC_HOST_EVENT_HANG_DETECT = 20,
+	/* Hang detect logic detected a hang and warm rebooted the AP */
+	EC_HOST_EVENT_HANG_REBOOT = 21,
+
 	/*
 	 * The high bit of the event mask is not used as a host event code.  If
 	 * it reads back as set, then the entire event mask should be
@@ -279,6 +330,188 @@ struct ec_lpc_host_args {
  */
 #define EC_HOST_ARGS_FLAG_TO_HOST   0x02
 
+/*****************************************************************************/
+/*
+ * Byte codes returned by EC over SPI interface.
+ *
+ * These can be used by the AP to debug the EC interface, and to determine
+ * when the EC is not in a state where it will ever get around to responding
+ * to the AP.
+ *
+ * Example of sequence of bytes read from EC for a current good transfer:
+ *   1. -                  - AP asserts chip select (CS#)
+ *   2. EC_SPI_OLD_READY   - AP sends first byte(s) of request
+ *   3. -                  - EC starts handling CS# interrupt
+ *   4. EC_SPI_RECEIVING   - AP sends remaining byte(s) of request
+ *   5. EC_SPI_PROCESSING  - EC starts processing request; AP is clocking in
+ *                           bytes looking for EC_SPI_FRAME_START
+ *   6. -                  - EC finishes processing and sets up response
+ *   7. EC_SPI_FRAME_START - AP reads frame byte
+ *   8. (response packet)  - AP reads response packet
+ *   9. EC_SPI_PAST_END    - Any additional bytes read by AP
+ *   10 -                  - AP deasserts chip select
+ *   11 -                  - EC processes CS# interrupt and sets up DMA for
+ *                           next request
+ *
+ * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than
+ * the following byte values:
+ *   EC_SPI_OLD_READY
+ *   EC_SPI_RX_READY
+ *   EC_SPI_RECEIVING
+ *   EC_SPI_PROCESSING
+ *
+ * Then the EC found an error in the request, or was not ready for the request
+ * and lost data.  The AP should give up waiting for EC_SPI_FRAME_START,
+ * because the EC is unable to tell when the AP is done sending its request.
+ */
+
+/*
+ * Framing byte which precedes a response packet from the EC.  After sending a
+ * request, the AP will clock in bytes until it sees the framing byte, then
+ * clock in the response packet.
+ */
+#define EC_SPI_FRAME_START    0xec
+
+/*
+ * Padding bytes which are clocked out after the end of a response packet.
+ */
+#define EC_SPI_PAST_END       0xed
+
+/*
+ * EC is ready to receive, and has ignored the byte sent by the AP.  EC expects
+ * that the AP will send a valid packet header (starting with
+ * EC_COMMAND_PROTOCOL_3) in the next 32 bytes.
+ */
+#define EC_SPI_RX_READY       0xf8
+
+/*
+ * EC has started receiving the request from the AP, but hasn't started
+ * processing it yet.
+ */
+#define EC_SPI_RECEIVING      0xf9
+
+/* EC has received the entire request from the AP and is processing it. */
+#define EC_SPI_PROCESSING     0xfa
+
+/*
+ * EC received bad data from the AP, such as a packet header with an invalid
+ * length.  EC will ignore all data until chip select deasserts.
+ */
+#define EC_SPI_RX_BAD_DATA    0xfb
+
+/*
+ * EC received data from the AP before it was ready.  That is, the AP asserted
+ * chip select and started clocking data before the EC was ready to receive it.
+ * EC will ignore all data until chip select deasserts.
+ */
+#define EC_SPI_NOT_READY      0xfc
+
+/*
+ * EC was ready to receive a request from the AP.  EC has treated the byte sent
+ * by the AP as part of a request packet, or (for old-style ECs) is processing
+ * a fully received packet but is not ready to respond yet.
+ */
+#define EC_SPI_OLD_READY      0xfd
+
+/*****************************************************************************/
+
+/*
+ * Protocol version 2 for I2C and SPI send a request this way:
+ *
+ *	0	EC_CMD_VERSION0 + (command version)
+ *	1	Command number
+ *	2	Length of params = N
+ *	3..N+2	Params, if any
+ *	N+3	8-bit checksum of bytes 0..N+2
+ *
+ * The corresponding response is:
+ *
+ *	0	Result code (EC_RES_*)
+ *	1	Length of params = M
+ *	2..M+1	Params, if any
+ *	M+2	8-bit checksum of bytes 0..M+1
+ */
+#define EC_PROTO2_REQUEST_HEADER_BYTES 3
+#define EC_PROTO2_REQUEST_TRAILER_BYTES 1
+#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES +	\
+				    EC_PROTO2_REQUEST_TRAILER_BYTES)
+
+#define EC_PROTO2_RESPONSE_HEADER_BYTES 2
+#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1
+#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES +	\
+				     EC_PROTO2_RESPONSE_TRAILER_BYTES)
+
+/* Parameter length was limited by the LPC interface */
+#define EC_PROTO2_MAX_PARAM_SIZE 0xfc
+
+/* Maximum request and response packet sizes for protocol version 2 */
+#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD +	\
+				    EC_PROTO2_MAX_PARAM_SIZE)
+#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD +	\
+				     EC_PROTO2_MAX_PARAM_SIZE)
+
+/*****************************************************************************/
+
+/*
+ * Value written to legacy command port / prefix byte to indicate protocol
+ * 3+ structs are being used.  Usage is bus-dependent.
+ */
+#define EC_COMMAND_PROTOCOL_3 0xda
+
+#define EC_HOST_REQUEST_VERSION 3
+
+/* Version 3 request from host */
+struct ec_host_request {
+	/* Struct version (=3)
+	 *
+	 * EC will return EC_RES_INVALID_HEADER if it receives a header with a
+	 * version it doesn't know how to parse.
+	 */
+	uint8_t struct_version;
+
+	/*
+	 * Checksum of request and data; sum of all bytes including checksum
+	 * should total to 0.
+	 */
+	uint8_t checksum;
+
+	/* Command code */
+	uint16_t command;
+
+	/* Command version */
+	uint8_t command_version;
+
+	/* Unused byte in current protocol version; set to 0 */
+	uint8_t reserved;
+
+	/* Length of data which follows this header */
+	uint16_t data_len;
+} __packed;
+
+#define EC_HOST_RESPONSE_VERSION 3
+
+/* Version 3 response from EC */
+struct ec_host_response {
+	/* Struct version (=3) */
+	uint8_t struct_version;
+
+	/*
+	 * Checksum of response and data; sum of all bytes including checksum
+	 * should total to 0.
+	 */
+	uint8_t checksum;
+
+	/* Result code (EC_RES_*) */
+	uint16_t result;
+
+	/* Length of data which follows this header */
+	uint16_t data_len;
+
+	/* Unused bytes in current protocol version; set to 0 */
+	uint16_t reserved;
+} __packed;
+
+/*****************************************************************************/
 /*
  * Notes on commands:
  *
@@ -418,6 +651,68 @@ struct ec_response_get_comms_status {
 	uint32_t flags;		/* Mask of enum ec_comms_status */
 } __packed;
 
+/* Fake a variety of responses, purely for testing purposes. */
+#define EC_CMD_TEST_PROTOCOL		0x0a
+
+/* Tell the EC what to send back to us. */
+struct ec_params_test_protocol {
+	uint32_t ec_result;
+	uint32_t ret_len;
+	uint8_t buf[32];
+} __packed;
+
+/* Here it comes... */
+struct ec_response_test_protocol {
+	uint8_t buf[32];
+} __packed;
+
+/* Get prococol information */
+#define EC_CMD_GET_PROTOCOL_INFO	0x0b
+
+/* Flags for ec_response_get_protocol_info.flags */
+/* EC_RES_IN_PROGRESS may be returned if a command is slow */
+#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0)
+
+struct ec_response_get_protocol_info {
+	/* Fields which exist if at least protocol version 3 supported */
+
+	/* Bitmask of protocol versions supported (1 << n means version n)*/
+	uint32_t protocol_versions;
+
+	/* Maximum request packet size, in bytes */
+	uint16_t max_request_packet_size;
+
+	/* Maximum response packet size, in bytes */
+	uint16_t max_response_packet_size;
+
+	/* Flags; see EC_PROTOCOL_INFO_* */
+	uint32_t flags;
+} __packed;
+
+
+/*****************************************************************************/
+/* Get/Set miscellaneous values */
+
+/* The upper byte of .flags tells what to do (nothing means "get") */
+#define EC_GSV_SET        0x80000000
+
+/* The lower three bytes of .flags identifies the parameter, if that has
+   meaning for an individual command. */
+#define EC_GSV_PARAM_MASK 0x00ffffff
+
+struct ec_params_get_set_value {
+	uint32_t flags;
+	uint32_t value;
+} __packed;
+
+struct ec_response_get_set_value {
+	uint32_t flags;
+	uint32_t value;
+} __packed;
+
+/* More than one command can use these structs to get/set paramters. */
+#define EC_CMD_GSV_PAUSE_IN_S5	0x0c
+
 
 /*****************************************************************************/
 /* Flash commands */
@@ -425,6 +720,7 @@ struct ec_response_get_comms_status {
 /* Get flash info */
 #define EC_CMD_FLASH_INFO 0x10
 
+/* Version 0 returns these fields */
 struct ec_response_flash_info {
 	/* Usable flash size, in bytes */
 	uint32_t flash_size;
@@ -445,6 +741,37 @@ struct ec_response_flash_info {
 	uint32_t protect_block_size;
 } __packed;
 
+/* Flags for version 1+ flash info command */
+/* EC flash erases bits to 0 instead of 1 */
+#define EC_FLASH_INFO_ERASE_TO_0 (1 << 0)
+
+/*
+ * Version 1 returns the same initial fields as version 0, with additional
+ * fields following.
+ *
+ * gcc anonymous structs don't seem to get along with the __packed directive;
+ * if they did we'd define the version 0 struct as a sub-struct of this one.
+ */
+struct ec_response_flash_info_1 {
+	/* Version 0 fields; see above for description */
+	uint32_t flash_size;
+	uint32_t write_block_size;
+	uint32_t erase_block_size;
+	uint32_t protect_block_size;
+
+	/* Version 1 adds these fields: */
+	/*
+	 * Ideal write size in bytes.  Writes will be fastest if size is
+	 * exactly this and offset is a multiple of this.  For example, an EC
+	 * may have a write buffer which can do half-page operations if data is
+	 * aligned, and a slower word-at-a-time write mode.
+	 */
+	uint32_t write_ideal_size;
+
+	/* Flags; see EC_FLASH_INFO_* */
+	uint32_t flags;
+} __packed;
+
 /*
  * Read flash
  *
@@ -459,15 +786,15 @@ struct ec_params_flash_read {
 
 /* Write flash */
 #define EC_CMD_FLASH_WRITE 0x12
+#define EC_VER_FLASH_WRITE 1
+
+/* Version 0 of the flash command supported only 64 bytes of data */
+#define EC_FLASH_WRITE_VER0_SIZE 64
 
 struct ec_params_flash_write {
 	uint32_t offset;   /* Byte offset to write */
 	uint32_t size;     /* Size to write in bytes */
-	/*
-	 * Data to write.  Could really use EC_PARAM_SIZE - 8, but tidiest to
-	 * use a power of 2 so writes stay aligned.
-	 */
-	uint8_t data[64];
+	/* Followed by data to write */
 } __packed;
 
 /* Erase flash */
@@ -543,7 +870,7 @@ struct ec_response_flash_protect {
 
 enum ec_flash_region {
 	/* Region which holds read-only EC image */
-	EC_FLASH_REGION_RO,
+	EC_FLASH_REGION_RO = 0,
 	/* Region which holds rewritable EC image */
 	EC_FLASH_REGION_RW,
 	/*
@@ -551,6 +878,8 @@ enum ec_flash_region {
 	 * EC_FLASH_REGION_RO)
 	 */
 	EC_FLASH_REGION_WP_RO,
+	/* Number of regions */
+	EC_FLASH_REGION_COUNT,
 };
 
 struct ec_params_flash_region_info {
@@ -639,15 +968,15 @@ struct rgb_s {
  */
 struct lightbar_params {
 	/* Timing */
-	int google_ramp_up;
-	int google_ramp_down;
-	int s3s0_ramp_up;
-	int s0_tick_delay[2];			/* AC=0/1 */
-	int s0a_tick_delay[2];			/* AC=0/1 */
-	int s0s3_ramp_down;
-	int s3_sleep_for;
-	int s3_ramp_up;
-	int s3_ramp_down;
+	int32_t google_ramp_up;
+	int32_t google_ramp_down;
+	int32_t s3s0_ramp_up;
+	int32_t s0_tick_delay[2];		/* AC=0/1 */
+	int32_t s0a_tick_delay[2];		/* AC=0/1 */
+	int32_t s0s3_ramp_down;
+	int32_t s3_sleep_for;
+	int32_t s3_ramp_up;
+	int32_t s3_ramp_down;
 
 	/* Oscillation */
 	uint8_t new_s0;
@@ -676,7 +1005,7 @@ struct ec_params_lightbar {
 	union {
 		struct {
 			/* no args */
-		} dump, off, on, init, get_seq, get_params;
+		} dump, off, on, init, get_seq, get_params, version;
 
 		struct num {
 			uint8_t num;
@@ -710,6 +1039,11 @@ struct ec_response_lightbar {
 
 		struct lightbar_params get_params;
 
+		struct version {
+			uint32_t num;
+			uint32_t flags;
+		} version;
+
 		struct {
 			/* no return params */
 		} off, on, init, brightness, seq, reg, rgb, demo, set_params;
@@ -730,10 +1064,62 @@ enum lightbar_command {
 	LIGHTBAR_CMD_DEMO = 9,
 	LIGHTBAR_CMD_GET_PARAMS = 10,
 	LIGHTBAR_CMD_SET_PARAMS = 11,
+	LIGHTBAR_CMD_VERSION = 12,
 	LIGHTBAR_NUM_CMDS
 };
 
 /*****************************************************************************/
+/* LED control commands */
+
+#define EC_CMD_LED_CONTROL 0x29
+
+enum ec_led_id {
+	/* LED to indicate battery state of charge */
+	EC_LED_ID_BATTERY_LED = 0,
+	/*
+	 * LED to indicate system power state (on or in suspend).
+	 * May be on power button or on C-panel.
+	 */
+	EC_LED_ID_POWER_LED,
+	/* LED on power adapter or its plug */
+	EC_LED_ID_ADAPTER_LED,
+
+	EC_LED_ID_COUNT
+};
+
+/* LED control flags */
+#define EC_LED_FLAGS_QUERY (1 << 0) /* Query LED capability only */
+#define EC_LED_FLAGS_AUTO  (1 << 1) /* Switch LED back to automatic control */
+
+enum ec_led_colors {
+	EC_LED_COLOR_RED = 0,
+	EC_LED_COLOR_GREEN,
+	EC_LED_COLOR_BLUE,
+	EC_LED_COLOR_YELLOW,
+	EC_LED_COLOR_WHITE,
+
+	EC_LED_COLOR_COUNT
+};
+
+struct ec_params_led_control {
+	uint8_t led_id;     /* Which LED to control */
+	uint8_t flags;      /* Control flags */
+
+	uint8_t brightness[EC_LED_COLOR_COUNT];
+} __packed;
+
+struct ec_response_led_control {
+	/*
+	 * Available brightness value range.
+	 *
+	 * Range 0 means color channel not present.
+	 * Range 1 means on/off control.
+	 * Other values means the LED is control by PWM.
+	 */
+	uint8_t brightness_range[EC_LED_COLOR_COUNT];
+} __packed;
+
+/*****************************************************************************/
 /* Verified boot commands */
 
 /*
@@ -790,6 +1176,181 @@ enum ec_vboot_hash_status {
 #define EC_VBOOT_HASH_OFFSET_RW 0xfffffffd
 
 /*****************************************************************************/
+/*
+ * Motion sense commands. We'll make separate structs for sub-commands with
+ * different input args, so that we know how much to expect.
+ */
+#define EC_CMD_MOTION_SENSE_CMD 0x2B
+
+/* Motion sense commands */
+enum motionsense_command {
+	/*
+	 * Dump command returns all motion sensor data including motion sense
+	 * module flags and individual sensor flags.
+	 */
+	MOTIONSENSE_CMD_DUMP = 0,
+
+	/*
+	 * Info command returns data describing the details of a given sensor,
+	 * including enum motionsensor_type, enum motionsensor_location, and
+	 * enum motionsensor_chip.
+	 */
+	MOTIONSENSE_CMD_INFO = 1,
+
+	/*
+	 * EC Rate command is a setter/getter command for the EC sampling rate
+	 * of all motion sensors in milliseconds.
+	 */
+	MOTIONSENSE_CMD_EC_RATE = 2,
+
+	/*
+	 * Sensor ODR command is a setter/getter command for the output data
+	 * rate of a specific motion sensor in millihertz.
+	 */
+	MOTIONSENSE_CMD_SENSOR_ODR = 3,
+
+	/*
+	 * Sensor range command is a setter/getter command for the range of
+	 * a specified motion sensor in +/-G's or +/- deg/s.
+	 */
+	MOTIONSENSE_CMD_SENSOR_RANGE = 4,
+
+	/*
+	 * Setter/getter command for the keyboard wake angle. When the lid
+	 * angle is greater than this value, keyboard wake is disabled in S3,
+	 * and when the lid angle goes less than this value, keyboard wake is
+	 * enabled. Note, the lid angle measurement is an approximate,
+	 * un-calibrated value, hence the wake angle isn't exact.
+	 */
+	MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5,
+
+	/* Number of motionsense sub-commands. */
+	MOTIONSENSE_NUM_CMDS
+};
+
+enum motionsensor_id {
+	EC_MOTION_SENSOR_ACCEL_BASE = 0,
+	EC_MOTION_SENSOR_ACCEL_LID = 1,
+	EC_MOTION_SENSOR_GYRO = 2,
+
+	/*
+	 * Note, if more sensors are added and this count changes, the padding
+	 * in ec_response_motion_sense dump command must be modified.
+	 */
+	EC_MOTION_SENSOR_COUNT = 3
+};
+
+/* List of motion sensor types. */
+enum motionsensor_type {
+	MOTIONSENSE_TYPE_ACCEL = 0,
+	MOTIONSENSE_TYPE_GYRO = 1,
+};
+
+/* List of motion sensor locations. */
+enum motionsensor_location {
+	MOTIONSENSE_LOC_BASE = 0,
+	MOTIONSENSE_LOC_LID = 1,
+};
+
+/* List of motion sensor chips. */
+enum motionsensor_chip {
+	MOTIONSENSE_CHIP_KXCJ9 = 0,
+};
+
+/* Module flag masks used for the dump sub-command. */
+#define MOTIONSENSE_MODULE_FLAG_ACTIVE (1<<0)
+
+/* Sensor flag masks used for the dump sub-command. */
+#define MOTIONSENSE_SENSOR_FLAG_PRESENT (1<<0)
+
+/*
+ * Send this value for the data element to only perform a read. If you
+ * send any other value, the EC will interpret it as data to set and will
+ * return the actual value set.
+ */
+#define EC_MOTION_SENSE_NO_VALUE -1
+
+struct ec_params_motion_sense {
+	uint8_t cmd;
+	union {
+		/* Used for MOTIONSENSE_CMD_DUMP. */
+		struct {
+			/* no args */
+		} dump;
+
+		/*
+		 * Used for MOTIONSENSE_CMD_EC_RATE and
+		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+		 */
+		struct {
+			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+			int16_t data;
+		} ec_rate, kb_wake_angle;
+
+		/* Used for MOTIONSENSE_CMD_INFO. */
+		struct {
+			/* Should be element of enum motionsensor_id. */
+			uint8_t sensor_num;
+		} info;
+
+		/*
+		 * Used for MOTIONSENSE_CMD_SENSOR_ODR and
+		 * MOTIONSENSE_CMD_SENSOR_RANGE.
+		 */
+		struct {
+			/* Should be element of enum motionsensor_id. */
+			uint8_t sensor_num;
+
+			/* Rounding flag, true for round-up, false for down. */
+			uint8_t roundup;
+
+			uint16_t reserved;
+
+			/* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */
+			int32_t data;
+		} sensor_odr, sensor_range;
+	};
+} __packed;
+
+struct ec_response_motion_sense {
+	union {
+		/* Used for MOTIONSENSE_CMD_DUMP. */
+		struct {
+			/* Flags representing the motion sensor module. */
+			uint8_t module_flags;
+
+			/* Flags for each sensor in enum motionsensor_id. */
+			uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT];
+
+			/* Array of all sensor data. Each sensor is 3-axis. */
+			int16_t data[3*EC_MOTION_SENSOR_COUNT];
+		} dump;
+
+		/* Used for MOTIONSENSE_CMD_INFO. */
+		struct {
+			/* Should be element of enum motionsensor_type. */
+			uint8_t type;
+
+			/* Should be element of enum motionsensor_location. */
+			uint8_t location;
+
+			/* Should be element of enum motionsensor_chip. */
+			uint8_t chip;
+		} info;
+
+		/*
+		 * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR,
+		 * MOTIONSENSE_CMD_SENSOR_RANGE, and
+		 * MOTIONSENSE_CMD_KB_WAKE_ANGLE.
+		 */
+		struct {
+			/* Current value of the parameter queried. */
+			int32_t ret;
+		} ec_rate, sensor_odr, sensor_range, kb_wake_angle;
+	};
+} __packed;
+
+/*****************************************************************************/
 /* USB charging control commands */
 
 /* Set USB port charging mode */
@@ -868,20 +1429,27 @@ struct ec_response_port80_last_boot {
 } __packed;
 
 /*****************************************************************************/
-/* Thermal engine commands */
+/* Thermal engine commands. Note that there are two implementations. We'll
+ * reuse the command number, but the data and behavior is incompatible.
+ * Version 0 is what originally shipped on Link.
+ * Version 1 separates the CPU thermal limits from the fan control.
+ */
 
-/* Set thershold value */
 #define EC_CMD_THERMAL_SET_THRESHOLD 0x50
+#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
+
+/* The version 0 structs are opaque. You have to know what they are for
+ * the get/set commands to make any sense.
+ */
 
+/* Version 0 - set */
 struct ec_params_thermal_set_threshold {
 	uint8_t sensor_type;
 	uint8_t threshold_id;
 	uint16_t value;
 } __packed;
 
-/* Get threshold value */
-#define EC_CMD_THERMAL_GET_THRESHOLD 0x51
-
+/* Version 0 - get */
 struct ec_params_thermal_get_threshold {
 	uint8_t sensor_type;
 	uint8_t threshold_id;
@@ -891,6 +1459,41 @@ struct ec_response_thermal_get_threshold {
 	uint16_t value;
 } __packed;
 
+
+/* The version 1 structs are visible. */
+enum ec_temp_thresholds {
+	EC_TEMP_THRESH_WARN = 0,
+	EC_TEMP_THRESH_HIGH,
+	EC_TEMP_THRESH_HALT,
+
+	EC_TEMP_THRESH_COUNT
+};
+
+/* Thermal configuration for one temperature sensor. Temps are in degrees K.
+ * Zero values will be silently ignored by the thermal task.
+ */
+struct ec_thermal_config {
+	uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */
+	uint32_t temp_fan_off;		/* no active cooling needed */
+	uint32_t temp_fan_max;		/* max active cooling needed */
+} __packed;
+
+/* Version 1 - get config for one sensor. */
+struct ec_params_thermal_get_threshold_v1 {
+	uint32_t sensor_num;
+} __packed;
+/* This returns a struct ec_thermal_config */
+
+/* Version 1 - set config for one sensor.
+ * Use read-modify-write for best results! */
+struct ec_params_thermal_set_threshold_v1 {
+	uint32_t sensor_num;
+	struct ec_thermal_config cfg;
+} __packed;
+/* This returns no data */
+
+/****************************************************************************/
+
 /* Toggle automatic fan control */
 #define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x52
 
@@ -920,6 +1523,18 @@ struct ec_params_tmp006_set_calibration {
 	float b2;
 } __packed;
 
+/* Read raw TMP006 data */
+#define EC_CMD_TMP006_GET_RAW 0x55
+
+struct ec_params_tmp006_get_raw {
+	uint8_t index;
+} __packed;
+
+struct ec_response_tmp006_get_raw {
+	int32_t t;  /* In 1/100 K */
+	int32_t v;  /* In nV */
+};
+
 /*****************************************************************************/
 /* MKBP - Matrix KeyBoard Protocol */
 
@@ -1118,11 +1733,41 @@ struct ec_params_switch_enable_backlight {
 
 /* Enable/disable WLAN/Bluetooth */
 #define EC_CMD_SWITCH_ENABLE_WIRELESS 0x91
+#define EC_VER_SWITCH_ENABLE_WIRELESS 1
 
-struct ec_params_switch_enable_wireless {
+/* Version 0 params; no response */
+struct ec_params_switch_enable_wireless_v0 {
 	uint8_t enabled;
 } __packed;
 
+/* Version 1 params */
+struct ec_params_switch_enable_wireless_v1 {
+	/* Flags to enable now */
+	uint8_t now_flags;
+
+	/* Which flags to copy from now_flags */
+	uint8_t now_mask;
+
+	/*
+	 * Flags to leave enabled in S3, if they're on at the S0->S3
+	 * transition.  (Other flags will be disabled by the S0->S3
+	 * transition.)
+	 */
+	uint8_t suspend_flags;
+
+	/* Which flags to copy from suspend_flags */
+	uint8_t suspend_mask;
+} __packed;
+
+/* Version 1 response */
+struct ec_response_switch_enable_wireless_v1 {
+	/* Flags to enable now */
+	uint8_t now_flags;
+
+	/* Flags to leave enabled in S3 */
+	uint8_t suspend_flags;
+} __packed;
+
 /*****************************************************************************/
 /* GPIO commands. Only available on EC if write protect has been disabled. */
 
@@ -1147,11 +1792,16 @@ struct ec_response_gpio_get {
 /*****************************************************************************/
 /* I2C commands. Only available when flash write protect is unlocked. */
 
+/*
+ * TODO(crosbug.com/p/23570): These commands are deprecated, and will be
+ * removed soon.  Use EC_CMD_I2C_XFER instead.
+ */
+
 /* Read I2C bus */
 #define EC_CMD_I2C_READ 0x94
 
 struct ec_params_i2c_read {
-	uint16_t addr;
+	uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
 	uint8_t read_size; /* Either 8 or 16. */
 	uint8_t port;
 	uint8_t offset;
@@ -1165,7 +1815,7 @@ struct ec_response_i2c_read {
 
 struct ec_params_i2c_write {
 	uint16_t data;
-	uint16_t addr;
+	uint16_t addr; /* 8-bit address (7-bit shifted << 1) */
 	uint8_t write_size; /* Either 8 or 16. */
 	uint8_t port;
 	uint8_t offset;
@@ -1174,11 +1824,20 @@ struct ec_params_i2c_write {
 /*****************************************************************************/
 /* Charge state commands. Only available when flash write protect unlocked. */
 
-/* Force charge state machine to stop in idle mode */
-#define EC_CMD_CHARGE_FORCE_IDLE 0x96
+/* Force charge state machine to stop charging the battery or force it to
+ * discharge the battery.
+ */
+#define EC_CMD_CHARGE_CONTROL 0x96
+#define EC_VER_CHARGE_CONTROL 1
 
-struct ec_params_force_idle {
-	uint8_t enabled;
+enum ec_charge_control_mode {
+	CHARGE_CONTROL_NORMAL = 0,
+	CHARGE_CONTROL_IDLE,
+	CHARGE_CONTROL_DISCHARGE,
+};
+
+struct ec_params_charge_control {
+	uint32_t mode;  /* enum charge_control_mode */
 } __packed;
 
 /*****************************************************************************/
@@ -1206,14 +1865,231 @@ struct ec_params_force_idle {
 #define EC_CMD_BATTERY_CUT_OFF 0x99
 
 /*****************************************************************************/
-/* Temporary debug commands. TODO: remove this crosbug.com/p/13849 */
+/* USB port mux control. */
 
 /*
- * Dump charge state machine context.
- *
- * Response is a binary dump of charge state machine context.
+ * Switch USB mux or return to automatic switching.
+ */
+#define EC_CMD_USB_MUX 0x9a
+
+struct ec_params_usb_mux {
+	uint8_t mux;
+} __packed;
+
+/*****************************************************************************/
+/* LDOs / FETs control. */
+
+enum ec_ldo_state {
+	EC_LDO_STATE_OFF = 0,	/* the LDO / FET is shut down */
+	EC_LDO_STATE_ON = 1,	/* the LDO / FET is ON / providing power */
+};
+
+/*
+ * Switch on/off a LDO.
+ */
+#define EC_CMD_LDO_SET 0x9b
+
+struct ec_params_ldo_set {
+	uint8_t index;
+	uint8_t state;
+} __packed;
+
+/*
+ * Get LDO state.
+ */
+#define EC_CMD_LDO_GET 0x9c
+
+struct ec_params_ldo_get {
+	uint8_t index;
+} __packed;
+
+struct ec_response_ldo_get {
+	uint8_t state;
+} __packed;
+
+/*****************************************************************************/
+/* Power info. */
+
+/*
+ * Get power info.
+ */
+#define EC_CMD_POWER_INFO 0x9d
+
+struct ec_response_power_info {
+	uint32_t usb_dev_type;
+	uint16_t voltage_ac;
+	uint16_t voltage_system;
+	uint16_t current_system;
+	uint16_t usb_current_limit;
+} __packed;
+
+/*****************************************************************************/
+/* I2C passthru command */
+
+#define EC_CMD_I2C_PASSTHRU 0x9e
+
+/* Slave address is 10 (not 7) bit */
+#define EC_I2C_FLAG_10BIT	(1 << 16)
+
+/* Read data; if not present, message is a write */
+#define EC_I2C_FLAG_READ	(1 << 15)
+
+/* Mask for address */
+#define EC_I2C_ADDR_MASK	0x3ff
+
+#define EC_I2C_STATUS_NAK	(1 << 0) /* Transfer was not acknowledged */
+#define EC_I2C_STATUS_TIMEOUT	(1 << 1) /* Timeout during transfer */
+
+/* Any error */
+#define EC_I2C_STATUS_ERROR	(EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
+
+struct ec_params_i2c_passthru_msg {
+	uint16_t addr_flags;	/* I2C slave address (7 or 10 bits) and flags */
+	uint16_t len;		/* Number of bytes to read or write */
+} __packed;
+
+struct ec_params_i2c_passthru {
+	uint8_t port;		/* I2C port number */
+	uint8_t num_msgs;	/* Number of messages */
+	struct ec_params_i2c_passthru_msg msg[];
+	/* Data to write for all messages is concatenated here */
+} __packed;
+
+struct ec_response_i2c_passthru {
+	uint8_t i2c_status;	/* Status flags (EC_I2C_STATUS_...) */
+	uint8_t num_msgs;	/* Number of messages processed */
+	uint8_t data[];		/* Data read by messages concatenated here */
+} __packed;
+
+/*****************************************************************************/
+/* Power button hang detect */
+
+#define EC_CMD_HANG_DETECT 0x9f
+
+/* Reasons to start hang detection timer */
+/* Power button pressed */
+#define EC_HANG_START_ON_POWER_PRESS  (1 << 0)
+
+/* Lid closed */
+#define EC_HANG_START_ON_LID_CLOSE    (1 << 1)
+
+ /* Lid opened */
+#define EC_HANG_START_ON_LID_OPEN     (1 << 2)
+
+/* Start of AP S3->S0 transition (booting or resuming from suspend) */
+#define EC_HANG_START_ON_RESUME       (1 << 3)
+
+/* Reasons to cancel hang detection */
+
+/* Power button released */
+#define EC_HANG_STOP_ON_POWER_RELEASE (1 << 8)
+
+/* Any host command from AP received */
+#define EC_HANG_STOP_ON_HOST_COMMAND  (1 << 9)
+
+/* Stop on end of AP S0->S3 transition (suspending or shutting down) */
+#define EC_HANG_STOP_ON_SUSPEND       (1 << 10)
+
+/*
+ * If this flag is set, all the other fields are ignored, and the hang detect
+ * timer is started.  This provides the AP a way to start the hang timer
+ * without reconfiguring any of the other hang detect settings.  Note that
+ * you must previously have configured the timeouts.
+ */
+#define EC_HANG_START_NOW             (1 << 30)
+
+/*
+ * If this flag is set, all the other fields are ignored (including
+ * EC_HANG_START_NOW).  This provides the AP a way to stop the hang timer
+ * without reconfiguring any of the other hang detect settings.
  */
-#define EC_CMD_CHARGE_DUMP 0xa0
+#define EC_HANG_STOP_NOW              (1 << 31)
+
+struct ec_params_hang_detect {
+	/* Flags; see EC_HANG_* */
+	uint32_t flags;
+
+	/* Timeout in msec before generating host event, if enabled */
+	uint16_t host_event_timeout_msec;
+
+	/* Timeout in msec before generating warm reboot, if enabled */
+	uint16_t warm_reboot_timeout_msec;
+} __packed;
+
+/*****************************************************************************/
+/* Commands for battery charging */
+
+/*
+ * This is the single catch-all host command to exchange data regarding the
+ * charge state machine (v2 and up).
+ */
+#define EC_CMD_CHARGE_STATE 0xa0
+
+/* Subcommands for this host command */
+enum charge_state_command {
+	CHARGE_STATE_CMD_GET_STATE,
+	CHARGE_STATE_CMD_GET_PARAM,
+	CHARGE_STATE_CMD_SET_PARAM,
+	CHARGE_STATE_NUM_CMDS
+};
+
+/*
+ * Known param numbers are defined here. Ranges are reserved for board-specific
+ * params, which are handled by the particular implementations.
+ */
+enum charge_state_params {
+	CS_PARAM_CHG_VOLTAGE,	      /* charger voltage limit */
+	CS_PARAM_CHG_CURRENT,	      /* charger current limit */
+	CS_PARAM_CHG_INPUT_CURRENT,   /* charger input current limit */
+	CS_PARAM_CHG_STATUS,	      /* charger-specific status */
+	CS_PARAM_CHG_OPTION,	      /* charger-specific options */
+	/* How many so far? */
+	CS_NUM_BASE_PARAMS,
+
+	/* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */
+	CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000,
+	CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
+
+	/* Other custom param ranges go here... */
+};
+
+struct ec_params_charge_state {
+	uint8_t cmd;				/* enum charge_state_command */
+	union {
+		struct {
+			/* no args */
+		} get_state;
+
+		struct {
+			uint32_t param;		/* enum charge_state_param */
+		} get_param;
+
+		struct {
+			uint32_t param;		/* param to set */
+			uint32_t value;		/* value to set */
+		} set_param;
+	};
+} __packed;
+
+struct ec_response_charge_state {
+	union {
+		struct {
+			int ac;
+			int chg_voltage;
+			int chg_current;
+			int chg_input_current;
+			int batt_state_of_charge;
+		} get_state;
+
+		struct {
+			uint32_t value;
+		} get_param;
+		struct {
+			/* no return values */
+		} set_param;
+	};
+} __packed;
+
 
 /*
  * Set maximum battery charging current.
@@ -1221,15 +2097,59 @@ struct ec_params_force_idle {
 #define EC_CMD_CHARGE_CURRENT_LIMIT 0xa1
 
 struct ec_params_current_limit {
-	uint32_t limit;
+	uint32_t limit; /* in mA */
+} __packed;
+
+/*
+ * Set maximum external power current.
+ */
+#define EC_CMD_EXT_POWER_CURRENT_LIMIT 0xa2
+
+struct ec_params_ext_power_current_limit {
+	uint32_t limit; /* in mA */
+} __packed;
+
+/*****************************************************************************/
+/* Smart battery pass-through */
+
+/* Get / Set 16-bit smart battery registers */
+#define EC_CMD_SB_READ_WORD   0xb0
+#define EC_CMD_SB_WRITE_WORD  0xb1
+
+/* Get / Set string smart battery parameters
+ * formatted as SMBUS "block".
+ */
+#define EC_CMD_SB_READ_BLOCK  0xb2
+#define EC_CMD_SB_WRITE_BLOCK 0xb3
+
+struct ec_params_sb_rd {
+	uint8_t reg;
+} __packed;
+
+struct ec_response_sb_rd_word {
+	uint16_t value;
+} __packed;
+
+struct ec_params_sb_wr_word {
+	uint8_t reg;
+	uint16_t value;
+} __packed;
+
+struct ec_response_sb_rd_block {
+	uint8_t data[32];
+} __packed;
+
+struct ec_params_sb_wr_block {
+	uint8_t reg;
+	uint16_t data[32];
 } __packed;
 
 /*****************************************************************************/
 /* System commands */
 
 /*
- * TODO: this is a confusing name, since it doesn't necessarily reboot the EC.
- * Rename to "set image" or something similar.
+ * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't
+ * necessarily reboot the EC.  Rename to "image" or something similar?
  */
 #define EC_CMD_REBOOT_EC 0xd2
 
@@ -1308,6 +2228,7 @@ struct ec_params_reboot_ec {
 #define EC_CMD_ACPI_QUERY_EVENT 0x84
 
 /* Valid addresses in ACPI memory space, for read/write commands */
+
 /* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */
 #define EC_ACPI_MEM_VERSION            0x00
 /*
@@ -1317,8 +2238,60 @@ struct ec_params_reboot_ec {
 #define EC_ACPI_MEM_TEST               0x01
 /* Test compliment; writes here are ignored. */
 #define EC_ACPI_MEM_TEST_COMPLIMENT    0x02
+
 /* Keyboard backlight brightness percent (0 - 100) */
 #define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03
+/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */
+#define EC_ACPI_MEM_FAN_DUTY           0x04
+
+/*
+ * DPTF temp thresholds. Any of the EC's temp sensors can have up to two
+ * independent thresholds attached to them. The current value of the ID
+ * register determines which sensor is affected by the THRESHOLD and COMMIT
+ * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme
+ * as the memory-mapped sensors. The COMMIT register applies those settings.
+ *
+ * The spec does not mandate any way to read back the threshold settings
+ * themselves, but when a threshold is crossed the AP needs a way to determine
+ * which sensor(s) are responsible. Each reading of the ID register clears and
+ * returns one sensor ID that has crossed one of its threshold (in either
+ * direction) since the last read. A value of 0xFF means "no new thresholds
+ * have tripped". Setting or enabling the thresholds for a sensor will clear
+ * the unread event count for that sensor.
+ */
+#define EC_ACPI_MEM_TEMP_ID            0x05
+#define EC_ACPI_MEM_TEMP_THRESHOLD     0x06
+#define EC_ACPI_MEM_TEMP_COMMIT        0x07
+/*
+ * Here are the bits for the COMMIT register:
+ *   bit 0 selects the threshold index for the chosen sensor (0/1)
+ *   bit 1 enables/disables the selected threshold (0 = off, 1 = on)
+ * Each write to the commit register affects one threshold.
+ */
+#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK (1 << 0)
+#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK (1 << 1)
+/*
+ * Example:
+ *
+ * Set the thresholds for sensor 2 to 50 C and 60 C:
+ *   write 2 to [0x05]      --  select temp sensor 2
+ *   write 0x7b to [0x06]   --  C_TO_K(50) - EC_TEMP_SENSOR_OFFSET
+ *   write 0x2 to [0x07]    --  enable threshold 0 with this value
+ *   write 0x85 to [0x06]   --  C_TO_K(60) - EC_TEMP_SENSOR_OFFSET
+ *   write 0x3 to [0x07]    --  enable threshold 1 with this value
+ *
+ * Disable the 60 C threshold, leaving the 50 C threshold unchanged:
+ *   write 2 to [0x05]      --  select temp sensor 2
+ *   write 0x1 to [0x07]    --  disable threshold 1
+ */
+
+/* DPTF battery charging current limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT     0x08
+
+/* Charging limit is specified in 64 mA steps */
+#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA   64
+/* Value to disable DPTF battery charging limit */
+#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED  0xff
 
 /* Current version of ACPI memory address space */
 #define EC_ACPI_MEM_VERSION_CURRENT 1
@@ -1360,10 +2333,21 @@ struct ec_params_reboot_ec {
  * Header bytes greater than this indicate a later version. For example,
  * EC_CMD_VERSION0 + 1 means we are using version 1.
  *
- * The old EC interface must not use commands 0dc or higher.
+ * The old EC interface must not use commands 0xdc or higher.
  */
 #define EC_CMD_VERSION0 0xdc
 
 #endif  /* !__ACPI__ */
 
+/*****************************************************************************/
+/*
+ * Deprecated constants. These constants have been renamed for clarity. The
+ * meaning and size has not changed. Programs that use the old names should
+ * switch to the new names soon, as the old names may not be carried forward
+ * forever.
+ */
+#define EC_HOST_PARAM_SIZE      EC_PROTO2_MAX_PARAM_SIZE
+#define EC_LPC_ADDR_OLD_PARAM   EC_HOST_CMD_REGION1
+#define EC_OLD_PARAM_SIZE       EC_HOST_CMD_REGION_SIZE
+
 #endif  /* __CROS_EC_COMMANDS_H */
diff --git a/include/linux/mfd/ipaq-micro.h b/include/linux/mfd/ipaq-micro.h
new file mode 100644
index 00000000000..5c4d29f6674
--- /dev/null
+++ b/include/linux/mfd/ipaq-micro.h
@@ -0,0 +1,148 @@
+/*
+ * Header file for the compaq Micro MFD
+ */
+
+#ifndef _MFD_IPAQ_MICRO_H_
+#define _MFD_IPAQ_MICRO_H_
+
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+
+#define TX_BUF_SIZE	32
+#define RX_BUF_SIZE	16
+#define CHAR_SOF	0x02
+
+/*
+ * These are the different messages that can be sent to the microcontroller
+ * to control various aspects.
+ */
+#define MSG_VERSION		0x0
+#define MSG_KEYBOARD		0x2
+#define MSG_TOUCHSCREEN		0x3
+#define MSG_EEPROM_READ		0x4
+#define MSG_EEPROM_WRITE	0x5
+#define MSG_THERMAL_SENSOR	0x6
+#define MSG_NOTIFY_LED		0x8
+#define MSG_BATTERY		0x9
+#define MSG_SPI_READ		0xb
+#define MSG_SPI_WRITE		0xc
+#define MSG_BACKLIGHT		0xd /* H3600 only */
+#define MSG_CODEC_CTRL		0xe /* H3100 only */
+#define MSG_DISPLAY_CTRL	0xf /* H3100 only */
+
+/* state of receiver parser */
+enum rx_state {
+	STATE_SOF = 0,     /* Next byte should be start of frame */
+	STATE_ID,          /* Next byte is ID & message length   */
+	STATE_DATA,        /* Next byte is a data byte           */
+	STATE_CHKSUM       /* Next byte should be checksum       */
+};
+
+/**
+ * struct ipaq_micro_txdev - TX state
+ * @len: length of message in TX buffer
+ * @index: current index into TX buffer
+ * @buf: TX buffer
+ */
+struct ipaq_micro_txdev {
+	u8 len;
+	u8 index;
+	u8 buf[TX_BUF_SIZE];
+};
+
+/**
+ * struct ipaq_micro_rxdev - RX state
+ * @state: context of RX state machine
+ * @chksum: calculated checksum
+ * @id: message ID from packet
+ * @len: RX buffer length
+ * @index: RX buffer index
+ * @buf: RX buffer
+ */
+struct ipaq_micro_rxdev {
+	enum rx_state state;
+	unsigned char chksum;
+	u8            id;
+	unsigned int  len;
+	unsigned int  index;
+	u8            buf[RX_BUF_SIZE];
+};
+
+/**
+ * struct ipaq_micro_msg - message to the iPAQ microcontroller
+ * @id: 4-bit ID of the message
+ * @tx_len: length of TX data
+ * @tx_data: TX data to send
+ * @rx_len: length of receieved RX data
+ * @rx_data: RX data to recieve
+ * @ack: a completion that will be completed when RX is complete
+ * @node: list node if message gets queued
+ */
+struct ipaq_micro_msg {
+	u8 id;
+	u8 tx_len;
+	u8 tx_data[TX_BUF_SIZE];
+	u8 rx_len;
+	u8 rx_data[RX_BUF_SIZE];
+	struct completion ack;
+	struct list_head node;
+};
+
+/**
+ * struct ipaq_micro - iPAQ microcontroller state
+ * @dev: corresponding platform device
+ * @base: virtual memory base for underlying serial device
+ * @sdlc: virtual memory base for Synchronous Data Link Controller
+ * @version: version string
+ * @tx: TX state
+ * @rx: RX state
+ * @lock: lock for this state container
+ * @msg: current message
+ * @queue: message queue
+ * @key: callback for asynchronous key events
+ * @key_data: data to pass along with key events
+ * @ts: callback for asynchronous touchscreen events
+ * @ts_data: data to pass along with key events
+ */
+struct ipaq_micro {
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *sdlc;
+	char version[5];
+	struct ipaq_micro_txdev tx;	/* transmit ISR state */
+	struct ipaq_micro_rxdev rx;	/* receive ISR state */
+	spinlock_t lock;
+	struct ipaq_micro_msg *msg;
+	struct list_head queue;
+	void (*key) (void *data, int len, unsigned char *rxdata);
+	void *key_data;
+	void (*ts) (void *data, int len, unsigned char *rxdata);
+	void *ts_data;
+};
+
+extern int
+ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg);
+
+static inline int
+ipaq_micro_tx_msg_sync(struct ipaq_micro *micro,
+		       struct ipaq_micro_msg *msg)
+{
+	int ret;
+
+	init_completion(&msg->ack);
+	ret = ipaq_micro_tx_msg(micro, msg);
+	wait_for_completion(&msg->ack);
+
+	return ret;
+}
+
+static inline int
+ipaq_micro_tx_msg_async(struct ipaq_micro *micro,
+			struct ipaq_micro_msg *msg)
+{
+	init_completion(&msg->ack);
+	return ipaq_micro_tx_msg(micro, msg);
+}
+
+#endif /* _MFD_IPAQ_MICRO_H_ */
diff --git a/include/linux/mfd/kempld.h b/include/linux/mfd/kempld.h
index b911ef3add0..26e0b469e56 100644
--- a/include/linux/mfd/kempld.h
+++ b/include/linux/mfd/kempld.h
@@ -51,6 +51,8 @@
 #define	KEMPLD_TYPE_DEBUG		0x1
 #define	KEMPLD_TYPE_CUSTOM		0x2
 
+#define KEMPLD_VERSION_LEN		10
+
 /**
  * struct kempld_info - PLD device information structure
  * @major:	PLD major revision
@@ -60,6 +62,7 @@
  * @type:	PLD type
  * @spec_major:	PLD FW specification major revision
  * @spec_minor:	PLD FW specification minor revision
+ * @version:	PLD version string
  */
 struct kempld_info {
 	unsigned int major;
@@ -69,6 +72,7 @@ struct kempld_info {
 	unsigned int type;
 	unsigned int spec_major;
 	unsigned int spec_minor;
+	char version[KEMPLD_VERSION_LEN];
 };
 
 /**
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index a326c850f04..d63b1d30910 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -117,10 +117,6 @@ struct mc13xxx_led_platform_data {
 
 #define MAX_LED_CONTROL_REGS	6
 
-struct mc13xxx_leds_platform_data {
-	struct mc13xxx_led_platform_data *led;
-	int num_leds;
-
 /* MC13783 LED Control 0 */
 #define MC13783_LED_C0_ENABLE		(1 << 0)
 #define MC13783_LED_C0_TRIODE_MD	(1 << 7)
@@ -169,10 +165,13 @@ struct mc13xxx_leds_platform_data {
 /* MC34708 LED Control 0 */
 #define MC34708_LED_C0_CURRENT_R(x)	(((x) & 0x3) << 9)
 #define MC34708_LED_C0_CURRENT_G(x)	(((x) & 0x3) << 21)
+
+struct mc13xxx_leds_platform_data {
+	struct mc13xxx_led_platform_data *led;
+	int num_leds;
 	u32 led_control[MAX_LED_CONTROL_REGS];
 };
 
-struct mc13xxx_buttons_platform_data {
 #define MC13783_BUTTON_DBNC_0MS		0
 #define MC13783_BUTTON_DBNC_30MS	1
 #define MC13783_BUTTON_DBNC_150MS	2
@@ -180,6 +179,8 @@ struct mc13xxx_buttons_platform_data {
 #define MC13783_BUTTON_ENABLE		(1 << 2)
 #define MC13783_BUTTON_POL_INVERT	(1 << 3)
 #define MC13783_BUTTON_RESET_EN		(1 << 4)
+
+struct mc13xxx_buttons_platform_data {
 	int b1on_flags;
 	unsigned short b1on_key;
 	int b2on_flags;
@@ -188,14 +189,14 @@ struct mc13xxx_buttons_platform_data {
 	unsigned short b3on_key;
 };
 
+#define MC13783_TS_ATO_FIRST	false
+#define MC13783_TS_ATO_EACH	true
+
 struct mc13xxx_ts_platform_data {
 	/* Delay between Touchscreen polarization and ADC Conversion.
 	 * Given in clock ticks of a 32 kHz clock which gives a granularity of
 	 * about 30.5ms */
 	u8 ato;
-
-#define MC13783_TS_ATO_FIRST false
-#define MC13783_TS_ATO_EACH  true
 	/* Use the ATO delay only for the first conversion or for each one */
 	bool atox;
 };
@@ -210,11 +211,12 @@ struct mc13xxx_codec_platform_data {
 	enum mc13783_ssi_port dac_ssi_port;
 };
 
-struct mc13xxx_platform_data {
-#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
+#define MC13XXX_USE_TOUCHSCREEN	(1 << 0)
 #define MC13XXX_USE_CODEC	(1 << 1)
 #define MC13XXX_USE_ADC		(1 << 2)
 #define MC13XXX_USE_RTC		(1 << 3)
+
+struct mc13xxx_platform_data {
 	unsigned int flags;
 
 	struct mc13xxx_regulator_platform_data regulators;
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index b8f87b70440..3420e09e2e2 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -482,10 +482,10 @@ enum usb_irq_events {
 
 /* helper macro to get correct slave number */
 #define PALMAS_BASE_TO_SLAVE(x)		((x >> 8) - 1)
-#define PALMAS_BASE_TO_REG(x, y)	((x & 0xff) + y)
+#define PALMAS_BASE_TO_REG(x, y)	((x & 0xFF) + y)
 
 /* Base addresses of IP blocks in Palmas */
-#define PALMAS_SMPS_DVS_BASE					0x20
+#define PALMAS_SMPS_DVS_BASE					0x020
 #define PALMAS_RTC_BASE						0x100
 #define PALMAS_VALIDITY_BASE					0x118
 #define PALMAS_SMPS_BASE					0x120
@@ -504,19 +504,19 @@ enum usb_irq_events {
 #define PALMAS_TRIM_GPADC_BASE					0x3CD
 
 /* Registers for function RTC */
-#define PALMAS_SECONDS_REG					0x0
-#define PALMAS_MINUTES_REG					0x1
-#define PALMAS_HOURS_REG					0x2
-#define PALMAS_DAYS_REG						0x3
-#define PALMAS_MONTHS_REG					0x4
-#define PALMAS_YEARS_REG					0x5
-#define PALMAS_WEEKS_REG					0x6
-#define PALMAS_ALARM_SECONDS_REG				0x8
-#define PALMAS_ALARM_MINUTES_REG				0x9
-#define PALMAS_ALARM_HOURS_REG					0xA
-#define PALMAS_ALARM_DAYS_REG					0xB
-#define PALMAS_ALARM_MONTHS_REG					0xC
-#define PALMAS_ALARM_YEARS_REG					0xD
+#define PALMAS_SECONDS_REG					0x00
+#define PALMAS_MINUTES_REG					0x01
+#define PALMAS_HOURS_REG					0x02
+#define PALMAS_DAYS_REG						0x03
+#define PALMAS_MONTHS_REG					0x04
+#define PALMAS_YEARS_REG					0x05
+#define PALMAS_WEEKS_REG					0x06
+#define PALMAS_ALARM_SECONDS_REG				0x08
+#define PALMAS_ALARM_MINUTES_REG				0x09
+#define PALMAS_ALARM_HOURS_REG					0x0A
+#define PALMAS_ALARM_DAYS_REG					0x0B
+#define PALMAS_ALARM_MONTHS_REG					0x0C
+#define PALMAS_ALARM_YEARS_REG					0x0D
 #define PALMAS_RTC_CTRL_REG					0x10
 #define PALMAS_RTC_STATUS_REG					0x11
 #define PALMAS_RTC_INTERRUPTS_REG				0x12
@@ -527,201 +527,201 @@ enum usb_irq_events {
 
 /* Bit definitions for SECONDS_REG */
 #define PALMAS_SECONDS_REG_SEC1_MASK				0x70
-#define PALMAS_SECONDS_REG_SEC1_SHIFT				4
-#define PALMAS_SECONDS_REG_SEC0_MASK				0x0f
-#define PALMAS_SECONDS_REG_SEC0_SHIFT				0
+#define PALMAS_SECONDS_REG_SEC1_SHIFT				0x04
+#define PALMAS_SECONDS_REG_SEC0_MASK				0x0F
+#define PALMAS_SECONDS_REG_SEC0_SHIFT				0x00
 
 /* Bit definitions for MINUTES_REG */
 #define PALMAS_MINUTES_REG_MIN1_MASK				0x70
-#define PALMAS_MINUTES_REG_MIN1_SHIFT				4
-#define PALMAS_MINUTES_REG_MIN0_MASK				0x0f
-#define PALMAS_MINUTES_REG_MIN0_SHIFT				0
+#define PALMAS_MINUTES_REG_MIN1_SHIFT				0x04
+#define PALMAS_MINUTES_REG_MIN0_MASK				0x0F
+#define PALMAS_MINUTES_REG_MIN0_SHIFT				0x00
 
 /* Bit definitions for HOURS_REG */
 #define PALMAS_HOURS_REG_PM_NAM					0x80
-#define PALMAS_HOURS_REG_PM_NAM_SHIFT				7
+#define PALMAS_HOURS_REG_PM_NAM_SHIFT				0x07
 #define PALMAS_HOURS_REG_HOUR1_MASK				0x30
-#define PALMAS_HOURS_REG_HOUR1_SHIFT				4
-#define PALMAS_HOURS_REG_HOUR0_MASK				0x0f
-#define PALMAS_HOURS_REG_HOUR0_SHIFT				0
+#define PALMAS_HOURS_REG_HOUR1_SHIFT				0x04
+#define PALMAS_HOURS_REG_HOUR0_MASK				0x0F
+#define PALMAS_HOURS_REG_HOUR0_SHIFT				0x00
 
 /* Bit definitions for DAYS_REG */
 #define PALMAS_DAYS_REG_DAY1_MASK				0x30
-#define PALMAS_DAYS_REG_DAY1_SHIFT				4
-#define PALMAS_DAYS_REG_DAY0_MASK				0x0f
-#define PALMAS_DAYS_REG_DAY0_SHIFT				0
+#define PALMAS_DAYS_REG_DAY1_SHIFT				0x04
+#define PALMAS_DAYS_REG_DAY0_MASK				0x0F
+#define PALMAS_DAYS_REG_DAY0_SHIFT				0x00
 
 /* Bit definitions for MONTHS_REG */
 #define PALMAS_MONTHS_REG_MONTH1				0x10
-#define PALMAS_MONTHS_REG_MONTH1_SHIFT				4
-#define PALMAS_MONTHS_REG_MONTH0_MASK				0x0f
-#define PALMAS_MONTHS_REG_MONTH0_SHIFT				0
+#define PALMAS_MONTHS_REG_MONTH1_SHIFT				0x04
+#define PALMAS_MONTHS_REG_MONTH0_MASK				0x0F
+#define PALMAS_MONTHS_REG_MONTH0_SHIFT				0x00
 
 /* Bit definitions for YEARS_REG */
 #define PALMAS_YEARS_REG_YEAR1_MASK				0xf0
-#define PALMAS_YEARS_REG_YEAR1_SHIFT				4
-#define PALMAS_YEARS_REG_YEAR0_MASK				0x0f
-#define PALMAS_YEARS_REG_YEAR0_SHIFT				0
+#define PALMAS_YEARS_REG_YEAR1_SHIFT				0x04
+#define PALMAS_YEARS_REG_YEAR0_MASK				0x0F
+#define PALMAS_YEARS_REG_YEAR0_SHIFT				0x00
 
 /* Bit definitions for WEEKS_REG */
 #define PALMAS_WEEKS_REG_WEEK_MASK				0x07
-#define PALMAS_WEEKS_REG_WEEK_SHIFT				0
+#define PALMAS_WEEKS_REG_WEEK_SHIFT				0x00
 
 /* Bit definitions for ALARM_SECONDS_REG */
 #define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_MASK		0x70
-#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_SHIFT		4
-#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_MASK		0x0f
-#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_SHIFT		0
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_SHIFT		0x04
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_MASK		0x0F
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_SHIFT		0x00
 
 /* Bit definitions for ALARM_MINUTES_REG */
 #define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_MASK		0x70
-#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_SHIFT		4
-#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_MASK		0x0f
-#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_SHIFT		0
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_SHIFT		0x04
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_MASK		0x0F
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_SHIFT		0x00
 
 /* Bit definitions for ALARM_HOURS_REG */
 #define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM			0x80
-#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM_SHIFT		7
+#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM_SHIFT		0x07
 #define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_MASK			0x30
-#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_SHIFT		4
-#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_MASK			0x0f
-#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_SHIFT		0
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_SHIFT		0x04
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_MASK			0x0F
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_SHIFT		0x00
 
 /* Bit definitions for ALARM_DAYS_REG */
 #define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_MASK			0x30
-#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_SHIFT			4
-#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_MASK			0x0f
-#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_SHIFT			0
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_SHIFT			0x04
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_MASK			0x0F
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_SHIFT			0x00
 
 /* Bit definitions for ALARM_MONTHS_REG */
 #define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1			0x10
-#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1_SHIFT		4
-#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_MASK		0x0f
-#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_SHIFT		0
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1_SHIFT		0x04
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_MASK		0x0F
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_SHIFT		0x00
 
 /* Bit definitions for ALARM_YEARS_REG */
 #define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_MASK			0xf0
-#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_SHIFT		4
-#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_MASK			0x0f
-#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_SHIFT		0
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_SHIFT		0x04
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_MASK			0x0F
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_SHIFT		0x00
 
 /* Bit definitions for RTC_CTRL_REG */
 #define PALMAS_RTC_CTRL_REG_RTC_V_OPT				0x80
-#define PALMAS_RTC_CTRL_REG_RTC_V_OPT_SHIFT			7
+#define PALMAS_RTC_CTRL_REG_RTC_V_OPT_SHIFT			0x07
 #define PALMAS_RTC_CTRL_REG_GET_TIME				0x40
-#define PALMAS_RTC_CTRL_REG_GET_TIME_SHIFT			6
+#define PALMAS_RTC_CTRL_REG_GET_TIME_SHIFT			0x06
 #define PALMAS_RTC_CTRL_REG_SET_32_COUNTER			0x20
-#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER_SHIFT		5
+#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER_SHIFT		0x05
 #define PALMAS_RTC_CTRL_REG_TEST_MODE				0x10
-#define PALMAS_RTC_CTRL_REG_TEST_MODE_SHIFT			4
+#define PALMAS_RTC_CTRL_REG_TEST_MODE_SHIFT			0x04
 #define PALMAS_RTC_CTRL_REG_MODE_12_24				0x08
-#define PALMAS_RTC_CTRL_REG_MODE_12_24_SHIFT			3
+#define PALMAS_RTC_CTRL_REG_MODE_12_24_SHIFT			0x03
 #define PALMAS_RTC_CTRL_REG_AUTO_COMP				0x04
-#define PALMAS_RTC_CTRL_REG_AUTO_COMP_SHIFT			2
+#define PALMAS_RTC_CTRL_REG_AUTO_COMP_SHIFT			0x02
 #define PALMAS_RTC_CTRL_REG_ROUND_30S				0x02
-#define PALMAS_RTC_CTRL_REG_ROUND_30S_SHIFT			1
+#define PALMAS_RTC_CTRL_REG_ROUND_30S_SHIFT			0x01
 #define PALMAS_RTC_CTRL_REG_STOP_RTC				0x01
-#define PALMAS_RTC_CTRL_REG_STOP_RTC_SHIFT			0
+#define PALMAS_RTC_CTRL_REG_STOP_RTC_SHIFT			0x00
 
 /* Bit definitions for RTC_STATUS_REG */
 #define PALMAS_RTC_STATUS_REG_POWER_UP				0x80
-#define PALMAS_RTC_STATUS_REG_POWER_UP_SHIFT			7
+#define PALMAS_RTC_STATUS_REG_POWER_UP_SHIFT			0x07
 #define PALMAS_RTC_STATUS_REG_ALARM				0x40
-#define PALMAS_RTC_STATUS_REG_ALARM_SHIFT			6
+#define PALMAS_RTC_STATUS_REG_ALARM_SHIFT			0x06
 #define PALMAS_RTC_STATUS_REG_EVENT_1D				0x20
-#define PALMAS_RTC_STATUS_REG_EVENT_1D_SHIFT			5
+#define PALMAS_RTC_STATUS_REG_EVENT_1D_SHIFT			0x05
 #define PALMAS_RTC_STATUS_REG_EVENT_1H				0x10
-#define PALMAS_RTC_STATUS_REG_EVENT_1H_SHIFT			4
+#define PALMAS_RTC_STATUS_REG_EVENT_1H_SHIFT			0x04
 #define PALMAS_RTC_STATUS_REG_EVENT_1M				0x08
-#define PALMAS_RTC_STATUS_REG_EVENT_1M_SHIFT			3
+#define PALMAS_RTC_STATUS_REG_EVENT_1M_SHIFT			0x03
 #define PALMAS_RTC_STATUS_REG_EVENT_1S				0x04
-#define PALMAS_RTC_STATUS_REG_EVENT_1S_SHIFT			2
+#define PALMAS_RTC_STATUS_REG_EVENT_1S_SHIFT			0x02
 #define PALMAS_RTC_STATUS_REG_RUN				0x02
-#define PALMAS_RTC_STATUS_REG_RUN_SHIFT				1
+#define PALMAS_RTC_STATUS_REG_RUN_SHIFT				0x01
 
 /* Bit definitions for RTC_INTERRUPTS_REG */
 #define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN		0x10
-#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN_SHIFT	4
+#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN_SHIFT	0x04
 #define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM			0x08
-#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM_SHIFT		3
+#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM_SHIFT		0x03
 #define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER			0x04
-#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER_SHIFT		2
+#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER_SHIFT		0x02
 #define PALMAS_RTC_INTERRUPTS_REG_EVERY_MASK			0x03
-#define PALMAS_RTC_INTERRUPTS_REG_EVERY_SHIFT			0
+#define PALMAS_RTC_INTERRUPTS_REG_EVERY_SHIFT			0x00
 
 /* Bit definitions for RTC_COMP_LSB_REG */
-#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_MASK		0xff
-#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_SHIFT		0
+#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_MASK		0xFF
+#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_SHIFT		0x00
 
 /* Bit definitions for RTC_COMP_MSB_REG */
-#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_MASK		0xff
-#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_SHIFT		0
+#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_MASK		0xFF
+#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_SHIFT		0x00
 
 /* Bit definitions for RTC_RES_PROG_REG */
-#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_MASK		0x3f
-#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_SHIFT		0
+#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_MASK		0x3F
+#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_SHIFT		0x00
 
 /* Bit definitions for RTC_RESET_STATUS_REG */
 #define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS		0x01
-#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS_SHIFT		0
+#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS_SHIFT		0x00
 
 /* Registers for function BACKUP */
-#define PALMAS_BACKUP0						0x0
-#define PALMAS_BACKUP1						0x1
-#define PALMAS_BACKUP2						0x2
-#define PALMAS_BACKUP3						0x3
-#define PALMAS_BACKUP4						0x4
-#define PALMAS_BACKUP5						0x5
-#define PALMAS_BACKUP6						0x6
-#define PALMAS_BACKUP7						0x7
+#define PALMAS_BACKUP0						0x00
+#define PALMAS_BACKUP1						0x01
+#define PALMAS_BACKUP2						0x02
+#define PALMAS_BACKUP3						0x03
+#define PALMAS_BACKUP4						0x04
+#define PALMAS_BACKUP5						0x05
+#define PALMAS_BACKUP6						0x06
+#define PALMAS_BACKUP7						0x07
 
 /* Bit definitions for BACKUP0 */
-#define PALMAS_BACKUP0_BACKUP_MASK				0xff
-#define PALMAS_BACKUP0_BACKUP_SHIFT				0
+#define PALMAS_BACKUP0_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP0_BACKUP_SHIFT				0x00
 
 /* Bit definitions for BACKUP1 */
-#define PALMAS_BACKUP1_BACKUP_MASK				0xff
-#define PALMAS_BACKUP1_BACKUP_SHIFT				0
+#define PALMAS_BACKUP1_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP1_BACKUP_SHIFT				0x00
 
 /* Bit definitions for BACKUP2 */
-#define PALMAS_BACKUP2_BACKUP_MASK				0xff
-#define PALMAS_BACKUP2_BACKUP_SHIFT				0
+#define PALMAS_BACKUP2_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP2_BACKUP_SHIFT				0x00
 
 /* Bit definitions for BACKUP3 */
-#define PALMAS_BACKUP3_BACKUP_MASK				0xff
-#define PALMAS_BACKUP3_BACKUP_SHIFT				0
+#define PALMAS_BACKUP3_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP3_BACKUP_SHIFT				0x00
 
 /* Bit definitions for BACKUP4 */
-#define PALMAS_BACKUP4_BACKUP_MASK				0xff
-#define PALMAS_BACKUP4_BACKUP_SHIFT				0
+#define PALMAS_BACKUP4_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP4_BACKUP_SHIFT				0x00
 
 /* Bit definitions for BACKUP5 */
-#define PALMAS_BACKUP5_BACKUP_MASK				0xff
-#define PALMAS_BACKUP5_BACKUP_SHIFT				0
+#define PALMAS_BACKUP5_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP5_BACKUP_SHIFT				0x00
 
 /* Bit definitions for BACKUP6 */
-#define PALMAS_BACKUP6_BACKUP_MASK				0xff
-#define PALMAS_BACKUP6_BACKUP_SHIFT				0
+#define PALMAS_BACKUP6_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP6_BACKUP_SHIFT				0x00
 
 /* Bit definitions for BACKUP7 */
-#define PALMAS_BACKUP7_BACKUP_MASK				0xff
-#define PALMAS_BACKUP7_BACKUP_SHIFT				0
+#define PALMAS_BACKUP7_BACKUP_MASK				0xFF
+#define PALMAS_BACKUP7_BACKUP_SHIFT				0x00
 
 /* Registers for function SMPS */
-#define PALMAS_SMPS12_CTRL					0x0
-#define PALMAS_SMPS12_TSTEP					0x1
-#define PALMAS_SMPS12_FORCE					0x2
-#define PALMAS_SMPS12_VOLTAGE					0x3
-#define PALMAS_SMPS3_CTRL					0x4
-#define PALMAS_SMPS3_VOLTAGE					0x7
-#define PALMAS_SMPS45_CTRL					0x8
-#define PALMAS_SMPS45_TSTEP					0x9
-#define PALMAS_SMPS45_FORCE					0xA
-#define PALMAS_SMPS45_VOLTAGE					0xB
-#define PALMAS_SMPS6_CTRL					0xC
-#define PALMAS_SMPS6_TSTEP					0xD
-#define PALMAS_SMPS6_FORCE					0xE
-#define PALMAS_SMPS6_VOLTAGE					0xF
+#define PALMAS_SMPS12_CTRL					0x00
+#define PALMAS_SMPS12_TSTEP					0x01
+#define PALMAS_SMPS12_FORCE					0x02
+#define PALMAS_SMPS12_VOLTAGE					0x03
+#define PALMAS_SMPS3_CTRL					0x04
+#define PALMAS_SMPS3_VOLTAGE					0x07
+#define PALMAS_SMPS45_CTRL					0x08
+#define PALMAS_SMPS45_TSTEP					0x09
+#define PALMAS_SMPS45_FORCE					0x0A
+#define PALMAS_SMPS45_VOLTAGE					0x0B
+#define PALMAS_SMPS6_CTRL					0x0C
+#define PALMAS_SMPS6_TSTEP					0x0D
+#define PALMAS_SMPS6_FORCE					0x0E
+#define PALMAS_SMPS6_VOLTAGE					0x0F
 #define PALMAS_SMPS7_CTRL					0x10
 #define PALMAS_SMPS7_VOLTAGE					0x13
 #define PALMAS_SMPS8_CTRL					0x14
@@ -744,303 +744,303 @@ enum usb_irq_events {
 
 /* Bit definitions for SMPS12_CTRL */
 #define PALMAS_SMPS12_CTRL_WR_S					0x80
-#define PALMAS_SMPS12_CTRL_WR_S_SHIFT				7
+#define PALMAS_SMPS12_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN			0x40
-#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN_SHIFT			6
+#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN_SHIFT			0x06
 #define PALMAS_SMPS12_CTRL_STATUS_MASK				0x30
-#define PALMAS_SMPS12_CTRL_STATUS_SHIFT				4
+#define PALMAS_SMPS12_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK			0x0c
-#define PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK			0x03
-#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS12_TSTEP */
 #define PALMAS_SMPS12_TSTEP_TSTEP_MASK				0x03
-#define PALMAS_SMPS12_TSTEP_TSTEP_SHIFT				0
+#define PALMAS_SMPS12_TSTEP_TSTEP_SHIFT				0x00
 
 /* Bit definitions for SMPS12_FORCE */
 #define PALMAS_SMPS12_FORCE_CMD					0x80
-#define PALMAS_SMPS12_FORCE_CMD_SHIFT				7
-#define PALMAS_SMPS12_FORCE_VSEL_MASK				0x7f
-#define PALMAS_SMPS12_FORCE_VSEL_SHIFT				0
+#define PALMAS_SMPS12_FORCE_CMD_SHIFT				0x07
+#define PALMAS_SMPS12_FORCE_VSEL_MASK				0x7F
+#define PALMAS_SMPS12_FORCE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS12_VOLTAGE */
 #define PALMAS_SMPS12_VOLTAGE_RANGE				0x80
-#define PALMAS_SMPS12_VOLTAGE_RANGE_SHIFT			7
-#define PALMAS_SMPS12_VOLTAGE_VSEL_MASK				0x7f
-#define PALMAS_SMPS12_VOLTAGE_VSEL_SHIFT			0
+#define PALMAS_SMPS12_VOLTAGE_RANGE_SHIFT			0x07
+#define PALMAS_SMPS12_VOLTAGE_VSEL_MASK				0x7F
+#define PALMAS_SMPS12_VOLTAGE_VSEL_SHIFT			0x00
 
 /* Bit definitions for SMPS3_CTRL */
 #define PALMAS_SMPS3_CTRL_WR_S					0x80
-#define PALMAS_SMPS3_CTRL_WR_S_SHIFT				7
+#define PALMAS_SMPS3_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_SMPS3_CTRL_STATUS_MASK				0x30
-#define PALMAS_SMPS3_CTRL_STATUS_SHIFT				4
+#define PALMAS_SMPS3_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SMPS3_CTRL_MODE_SLEEP_MASK			0x0c
-#define PALMAS_SMPS3_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SMPS3_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SMPS3_CTRL_MODE_ACTIVE_MASK			0x03
-#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS3_VOLTAGE */
 #define PALMAS_SMPS3_VOLTAGE_RANGE				0x80
-#define PALMAS_SMPS3_VOLTAGE_RANGE_SHIFT			7
-#define PALMAS_SMPS3_VOLTAGE_VSEL_MASK				0x7f
-#define PALMAS_SMPS3_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_SMPS3_VOLTAGE_RANGE_SHIFT			0x07
+#define PALMAS_SMPS3_VOLTAGE_VSEL_MASK				0x7F
+#define PALMAS_SMPS3_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS45_CTRL */
 #define PALMAS_SMPS45_CTRL_WR_S					0x80
-#define PALMAS_SMPS45_CTRL_WR_S_SHIFT				7
+#define PALMAS_SMPS45_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN			0x40
-#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN_SHIFT			6
+#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN_SHIFT			0x06
 #define PALMAS_SMPS45_CTRL_STATUS_MASK				0x30
-#define PALMAS_SMPS45_CTRL_STATUS_SHIFT				4
+#define PALMAS_SMPS45_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SMPS45_CTRL_MODE_SLEEP_MASK			0x0c
-#define PALMAS_SMPS45_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SMPS45_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SMPS45_CTRL_MODE_ACTIVE_MASK			0x03
-#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS45_TSTEP */
 #define PALMAS_SMPS45_TSTEP_TSTEP_MASK				0x03
-#define PALMAS_SMPS45_TSTEP_TSTEP_SHIFT				0
+#define PALMAS_SMPS45_TSTEP_TSTEP_SHIFT				0x00
 
 /* Bit definitions for SMPS45_FORCE */
 #define PALMAS_SMPS45_FORCE_CMD					0x80
-#define PALMAS_SMPS45_FORCE_CMD_SHIFT				7
-#define PALMAS_SMPS45_FORCE_VSEL_MASK				0x7f
-#define PALMAS_SMPS45_FORCE_VSEL_SHIFT				0
+#define PALMAS_SMPS45_FORCE_CMD_SHIFT				0x07
+#define PALMAS_SMPS45_FORCE_VSEL_MASK				0x7F
+#define PALMAS_SMPS45_FORCE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS45_VOLTAGE */
 #define PALMAS_SMPS45_VOLTAGE_RANGE				0x80
-#define PALMAS_SMPS45_VOLTAGE_RANGE_SHIFT			7
-#define PALMAS_SMPS45_VOLTAGE_VSEL_MASK				0x7f
-#define PALMAS_SMPS45_VOLTAGE_VSEL_SHIFT			0
+#define PALMAS_SMPS45_VOLTAGE_RANGE_SHIFT			0x07
+#define PALMAS_SMPS45_VOLTAGE_VSEL_MASK				0x7F
+#define PALMAS_SMPS45_VOLTAGE_VSEL_SHIFT			0x00
 
 /* Bit definitions for SMPS6_CTRL */
 #define PALMAS_SMPS6_CTRL_WR_S					0x80
-#define PALMAS_SMPS6_CTRL_WR_S_SHIFT				7
+#define PALMAS_SMPS6_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN				0x40
-#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN_SHIFT			6
+#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN_SHIFT			0x06
 #define PALMAS_SMPS6_CTRL_STATUS_MASK				0x30
-#define PALMAS_SMPS6_CTRL_STATUS_SHIFT				4
+#define PALMAS_SMPS6_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SMPS6_CTRL_MODE_SLEEP_MASK			0x0c
-#define PALMAS_SMPS6_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SMPS6_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SMPS6_CTRL_MODE_ACTIVE_MASK			0x03
-#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS6_TSTEP */
 #define PALMAS_SMPS6_TSTEP_TSTEP_MASK				0x03
-#define PALMAS_SMPS6_TSTEP_TSTEP_SHIFT				0
+#define PALMAS_SMPS6_TSTEP_TSTEP_SHIFT				0x00
 
 /* Bit definitions for SMPS6_FORCE */
 #define PALMAS_SMPS6_FORCE_CMD					0x80
-#define PALMAS_SMPS6_FORCE_CMD_SHIFT				7
-#define PALMAS_SMPS6_FORCE_VSEL_MASK				0x7f
-#define PALMAS_SMPS6_FORCE_VSEL_SHIFT				0
+#define PALMAS_SMPS6_FORCE_CMD_SHIFT				0x07
+#define PALMAS_SMPS6_FORCE_VSEL_MASK				0x7F
+#define PALMAS_SMPS6_FORCE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS6_VOLTAGE */
 #define PALMAS_SMPS6_VOLTAGE_RANGE				0x80
-#define PALMAS_SMPS6_VOLTAGE_RANGE_SHIFT			7
-#define PALMAS_SMPS6_VOLTAGE_VSEL_MASK				0x7f
-#define PALMAS_SMPS6_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_SMPS6_VOLTAGE_RANGE_SHIFT			0x07
+#define PALMAS_SMPS6_VOLTAGE_VSEL_MASK				0x7F
+#define PALMAS_SMPS6_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS7_CTRL */
 #define PALMAS_SMPS7_CTRL_WR_S					0x80
-#define PALMAS_SMPS7_CTRL_WR_S_SHIFT				7
+#define PALMAS_SMPS7_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_SMPS7_CTRL_STATUS_MASK				0x30
-#define PALMAS_SMPS7_CTRL_STATUS_SHIFT				4
+#define PALMAS_SMPS7_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SMPS7_CTRL_MODE_SLEEP_MASK			0x0c
-#define PALMAS_SMPS7_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SMPS7_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SMPS7_CTRL_MODE_ACTIVE_MASK			0x03
-#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS7_VOLTAGE */
 #define PALMAS_SMPS7_VOLTAGE_RANGE				0x80
-#define PALMAS_SMPS7_VOLTAGE_RANGE_SHIFT			7
-#define PALMAS_SMPS7_VOLTAGE_VSEL_MASK				0x7f
-#define PALMAS_SMPS7_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_SMPS7_VOLTAGE_RANGE_SHIFT			0x07
+#define PALMAS_SMPS7_VOLTAGE_VSEL_MASK				0x7F
+#define PALMAS_SMPS7_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS8_CTRL */
 #define PALMAS_SMPS8_CTRL_WR_S					0x80
-#define PALMAS_SMPS8_CTRL_WR_S_SHIFT				7
+#define PALMAS_SMPS8_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN				0x40
-#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN_SHIFT			6
+#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN_SHIFT			0x06
 #define PALMAS_SMPS8_CTRL_STATUS_MASK				0x30
-#define PALMAS_SMPS8_CTRL_STATUS_SHIFT				4
+#define PALMAS_SMPS8_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SMPS8_CTRL_MODE_SLEEP_MASK			0x0c
-#define PALMAS_SMPS8_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SMPS8_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SMPS8_CTRL_MODE_ACTIVE_MASK			0x03
-#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS8_TSTEP */
 #define PALMAS_SMPS8_TSTEP_TSTEP_MASK				0x03
-#define PALMAS_SMPS8_TSTEP_TSTEP_SHIFT				0
+#define PALMAS_SMPS8_TSTEP_TSTEP_SHIFT				0x00
 
 /* Bit definitions for SMPS8_FORCE */
 #define PALMAS_SMPS8_FORCE_CMD					0x80
-#define PALMAS_SMPS8_FORCE_CMD_SHIFT				7
-#define PALMAS_SMPS8_FORCE_VSEL_MASK				0x7f
-#define PALMAS_SMPS8_FORCE_VSEL_SHIFT				0
+#define PALMAS_SMPS8_FORCE_CMD_SHIFT				0x07
+#define PALMAS_SMPS8_FORCE_VSEL_MASK				0x7F
+#define PALMAS_SMPS8_FORCE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS8_VOLTAGE */
 #define PALMAS_SMPS8_VOLTAGE_RANGE				0x80
-#define PALMAS_SMPS8_VOLTAGE_RANGE_SHIFT			7
-#define PALMAS_SMPS8_VOLTAGE_VSEL_MASK				0x7f
-#define PALMAS_SMPS8_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_SMPS8_VOLTAGE_RANGE_SHIFT			0x07
+#define PALMAS_SMPS8_VOLTAGE_VSEL_MASK				0x7F
+#define PALMAS_SMPS8_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS9_CTRL */
 #define PALMAS_SMPS9_CTRL_WR_S					0x80
-#define PALMAS_SMPS9_CTRL_WR_S_SHIFT				7
+#define PALMAS_SMPS9_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_SMPS9_CTRL_STATUS_MASK				0x30
-#define PALMAS_SMPS9_CTRL_STATUS_SHIFT				4
+#define PALMAS_SMPS9_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SMPS9_CTRL_MODE_SLEEP_MASK			0x0c
-#define PALMAS_SMPS9_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SMPS9_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SMPS9_CTRL_MODE_ACTIVE_MASK			0x03
-#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS9_VOLTAGE */
 #define PALMAS_SMPS9_VOLTAGE_RANGE				0x80
-#define PALMAS_SMPS9_VOLTAGE_RANGE_SHIFT			7
-#define PALMAS_SMPS9_VOLTAGE_VSEL_MASK				0x7f
-#define PALMAS_SMPS9_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_SMPS9_VOLTAGE_RANGE_SHIFT			0x07
+#define PALMAS_SMPS9_VOLTAGE_VSEL_MASK				0x7F
+#define PALMAS_SMPS9_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for SMPS10_CTRL */
 #define PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK			0xf0
-#define PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT			4
-#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_MASK			0x0f
-#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT			0x04
+#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_MASK			0x0F
+#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SMPS10_STATUS */
-#define PALMAS_SMPS10_STATUS_STATUS_MASK			0x0f
-#define PALMAS_SMPS10_STATUS_STATUS_SHIFT			0
+#define PALMAS_SMPS10_STATUS_STATUS_MASK			0x0F
+#define PALMAS_SMPS10_STATUS_STATUS_SHIFT			0x00
 
 /* Bit definitions for SMPS_CTRL */
 #define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN			0x20
-#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN_SHIFT		5
+#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN_SHIFT		0x05
 #define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN			0x10
-#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN_SHIFT		4
+#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN_SHIFT		0x04
 #define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_MASK			0x0c
-#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_SHIFT		2
+#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_SHIFT		0x02
 #define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_MASK		0x03
-#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_SHIFT		0
+#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_SHIFT		0x00
 
 /* Bit definitions for SMPS_PD_CTRL */
 #define PALMAS_SMPS_PD_CTRL_SMPS9				0x40
-#define PALMAS_SMPS_PD_CTRL_SMPS9_SHIFT				6
+#define PALMAS_SMPS_PD_CTRL_SMPS9_SHIFT				0x06
 #define PALMAS_SMPS_PD_CTRL_SMPS8				0x20
-#define PALMAS_SMPS_PD_CTRL_SMPS8_SHIFT				5
+#define PALMAS_SMPS_PD_CTRL_SMPS8_SHIFT				0x05
 #define PALMAS_SMPS_PD_CTRL_SMPS7				0x10
-#define PALMAS_SMPS_PD_CTRL_SMPS7_SHIFT				4
+#define PALMAS_SMPS_PD_CTRL_SMPS7_SHIFT				0x04
 #define PALMAS_SMPS_PD_CTRL_SMPS6				0x08
-#define PALMAS_SMPS_PD_CTRL_SMPS6_SHIFT				3
+#define PALMAS_SMPS_PD_CTRL_SMPS6_SHIFT				0x03
 #define PALMAS_SMPS_PD_CTRL_SMPS45				0x04
-#define PALMAS_SMPS_PD_CTRL_SMPS45_SHIFT			2
+#define PALMAS_SMPS_PD_CTRL_SMPS45_SHIFT			0x02
 #define PALMAS_SMPS_PD_CTRL_SMPS3				0x02
-#define PALMAS_SMPS_PD_CTRL_SMPS3_SHIFT				1
+#define PALMAS_SMPS_PD_CTRL_SMPS3_SHIFT				0x01
 #define PALMAS_SMPS_PD_CTRL_SMPS12				0x01
-#define PALMAS_SMPS_PD_CTRL_SMPS12_SHIFT			0
+#define PALMAS_SMPS_PD_CTRL_SMPS12_SHIFT			0x00
 
 /* Bit definitions for SMPS_THERMAL_EN */
 #define PALMAS_SMPS_THERMAL_EN_SMPS9				0x40
-#define PALMAS_SMPS_THERMAL_EN_SMPS9_SHIFT			6
+#define PALMAS_SMPS_THERMAL_EN_SMPS9_SHIFT			0x06
 #define PALMAS_SMPS_THERMAL_EN_SMPS8				0x20
-#define PALMAS_SMPS_THERMAL_EN_SMPS8_SHIFT			5
+#define PALMAS_SMPS_THERMAL_EN_SMPS8_SHIFT			0x05
 #define PALMAS_SMPS_THERMAL_EN_SMPS6				0x08
-#define PALMAS_SMPS_THERMAL_EN_SMPS6_SHIFT			3
+#define PALMAS_SMPS_THERMAL_EN_SMPS6_SHIFT			0x03
 #define PALMAS_SMPS_THERMAL_EN_SMPS457				0x04
-#define PALMAS_SMPS_THERMAL_EN_SMPS457_SHIFT			2
+#define PALMAS_SMPS_THERMAL_EN_SMPS457_SHIFT			0x02
 #define PALMAS_SMPS_THERMAL_EN_SMPS123				0x01
-#define PALMAS_SMPS_THERMAL_EN_SMPS123_SHIFT			0
+#define PALMAS_SMPS_THERMAL_EN_SMPS123_SHIFT			0x00
 
 /* Bit definitions for SMPS_THERMAL_STATUS */
 #define PALMAS_SMPS_THERMAL_STATUS_SMPS9			0x40
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS9_SHIFT			6
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS9_SHIFT			0x06
 #define PALMAS_SMPS_THERMAL_STATUS_SMPS8			0x20
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS8_SHIFT			5
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS8_SHIFT			0x05
 #define PALMAS_SMPS_THERMAL_STATUS_SMPS6			0x08
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS6_SHIFT			3
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS6_SHIFT			0x03
 #define PALMAS_SMPS_THERMAL_STATUS_SMPS457			0x04
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS457_SHIFT		2
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS457_SHIFT		0x02
 #define PALMAS_SMPS_THERMAL_STATUS_SMPS123			0x01
-#define PALMAS_SMPS_THERMAL_STATUS_SMPS123_SHIFT		0
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS123_SHIFT		0x00
 
 /* Bit definitions for SMPS_SHORT_STATUS */
 #define PALMAS_SMPS_SHORT_STATUS_SMPS10				0x80
-#define PALMAS_SMPS_SHORT_STATUS_SMPS10_SHIFT			7
+#define PALMAS_SMPS_SHORT_STATUS_SMPS10_SHIFT			0x07
 #define PALMAS_SMPS_SHORT_STATUS_SMPS9				0x40
-#define PALMAS_SMPS_SHORT_STATUS_SMPS9_SHIFT			6
+#define PALMAS_SMPS_SHORT_STATUS_SMPS9_SHIFT			0x06
 #define PALMAS_SMPS_SHORT_STATUS_SMPS8				0x20
-#define PALMAS_SMPS_SHORT_STATUS_SMPS8_SHIFT			5
+#define PALMAS_SMPS_SHORT_STATUS_SMPS8_SHIFT			0x05
 #define PALMAS_SMPS_SHORT_STATUS_SMPS7				0x10
-#define PALMAS_SMPS_SHORT_STATUS_SMPS7_SHIFT			4
+#define PALMAS_SMPS_SHORT_STATUS_SMPS7_SHIFT			0x04
 #define PALMAS_SMPS_SHORT_STATUS_SMPS6				0x08
-#define PALMAS_SMPS_SHORT_STATUS_SMPS6_SHIFT			3
+#define PALMAS_SMPS_SHORT_STATUS_SMPS6_SHIFT			0x03
 #define PALMAS_SMPS_SHORT_STATUS_SMPS45				0x04
-#define PALMAS_SMPS_SHORT_STATUS_SMPS45_SHIFT			2
+#define PALMAS_SMPS_SHORT_STATUS_SMPS45_SHIFT			0x02
 #define PALMAS_SMPS_SHORT_STATUS_SMPS3				0x02
-#define PALMAS_SMPS_SHORT_STATUS_SMPS3_SHIFT			1
+#define PALMAS_SMPS_SHORT_STATUS_SMPS3_SHIFT			0x01
 #define PALMAS_SMPS_SHORT_STATUS_SMPS12				0x01
-#define PALMAS_SMPS_SHORT_STATUS_SMPS12_SHIFT			0
+#define PALMAS_SMPS_SHORT_STATUS_SMPS12_SHIFT			0x00
 
 /* Bit definitions for SMPS_NEGATIVE_CURRENT_LIMIT_EN */
 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9		0x40
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9_SHIFT	6
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9_SHIFT	0x06
 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8		0x20
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8_SHIFT	5
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8_SHIFT	0x05
 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7		0x10
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7_SHIFT	4
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7_SHIFT	0x04
 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6		0x08
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6_SHIFT	3
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6_SHIFT	0x03
 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45		0x04
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45_SHIFT	2
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45_SHIFT	0x02
 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3		0x02
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3_SHIFT	1
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3_SHIFT	0x01
 #define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12		0x01
-#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12_SHIFT	0
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12_SHIFT	0x00
 
 /* Bit definitions for SMPS_POWERGOOD_MASK1 */
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10			0x80
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10_SHIFT		7
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10_SHIFT		0x07
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9			0x40
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9_SHIFT			6
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9_SHIFT			0x06
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8			0x20
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8_SHIFT			5
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8_SHIFT			0x05
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7			0x10
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7_SHIFT			4
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7_SHIFT			0x04
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6			0x08
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6_SHIFT			3
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6_SHIFT			0x03
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45			0x04
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45_SHIFT		2
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45_SHIFT		0x02
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3			0x02
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3_SHIFT			1
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3_SHIFT			0x01
 #define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12			0x01
-#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12_SHIFT		0
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12_SHIFT		0x00
 
 /* Bit definitions for SMPS_POWERGOOD_MASK2 */
 #define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT	0x80
-#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT_SHIFT	7
+#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT_SHIFT	0x07
 #define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7			0x04
-#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7_SHIFT		2
+#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7_SHIFT		0x02
 #define PALMAS_SMPS_POWERGOOD_MASK2_VBUS			0x02
-#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS_SHIFT			1
+#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS_SHIFT			0x01
 #define PALMAS_SMPS_POWERGOOD_MASK2_ACOK			0x01
-#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK_SHIFT			0
+#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK_SHIFT			0x00
 
 /* Registers for function LDO */
-#define PALMAS_LDO1_CTRL					0x0
-#define PALMAS_LDO1_VOLTAGE					0x1
-#define PALMAS_LDO2_CTRL					0x2
-#define PALMAS_LDO2_VOLTAGE					0x3
-#define PALMAS_LDO3_CTRL					0x4
-#define PALMAS_LDO3_VOLTAGE					0x5
-#define PALMAS_LDO4_CTRL					0x6
-#define PALMAS_LDO4_VOLTAGE					0x7
-#define PALMAS_LDO5_CTRL					0x8
-#define PALMAS_LDO5_VOLTAGE					0x9
-#define PALMAS_LDO6_CTRL					0xA
-#define PALMAS_LDO6_VOLTAGE					0xB
-#define PALMAS_LDO7_CTRL					0xC
-#define PALMAS_LDO7_VOLTAGE					0xD
-#define PALMAS_LDO8_CTRL					0xE
-#define PALMAS_LDO8_VOLTAGE					0xF
+#define PALMAS_LDO1_CTRL					0x00
+#define PALMAS_LDO1_VOLTAGE					0x01
+#define PALMAS_LDO2_CTRL					0x02
+#define PALMAS_LDO2_VOLTAGE					0x03
+#define PALMAS_LDO3_CTRL					0x04
+#define PALMAS_LDO3_VOLTAGE					0x05
+#define PALMAS_LDO4_CTRL					0x06
+#define PALMAS_LDO4_VOLTAGE					0x07
+#define PALMAS_LDO5_CTRL					0x08
+#define PALMAS_LDO5_VOLTAGE					0x09
+#define PALMAS_LDO6_CTRL					0x0A
+#define PALMAS_LDO6_VOLTAGE					0x0B
+#define PALMAS_LDO7_CTRL					0x0C
+#define PALMAS_LDO7_VOLTAGE					0x0D
+#define PALMAS_LDO8_CTRL					0x0E
+#define PALMAS_LDO8_VOLTAGE					0x0F
 #define PALMAS_LDO9_CTRL					0x10
 #define PALMAS_LDO9_VOLTAGE					0x11
 #define PALMAS_LDOLN_CTRL					0x12
@@ -1055,236 +1055,236 @@ enum usb_irq_events {
 
 /* Bit definitions for LDO1_CTRL */
 #define PALMAS_LDO1_CTRL_WR_S					0x80
-#define PALMAS_LDO1_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO1_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO1_CTRL_STATUS					0x10
-#define PALMAS_LDO1_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO1_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO1_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO1_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO1_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO1_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO1_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO1_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO1_VOLTAGE */
-#define PALMAS_LDO1_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO1_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO1_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO1_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO2_CTRL */
 #define PALMAS_LDO2_CTRL_WR_S					0x80
-#define PALMAS_LDO2_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO2_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO2_CTRL_STATUS					0x10
-#define PALMAS_LDO2_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO2_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO2_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO2_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO2_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO2_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO2_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO2_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO2_VOLTAGE */
-#define PALMAS_LDO2_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO2_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO2_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO2_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO3_CTRL */
 #define PALMAS_LDO3_CTRL_WR_S					0x80
-#define PALMAS_LDO3_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO3_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO3_CTRL_STATUS					0x10
-#define PALMAS_LDO3_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO3_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO3_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO3_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO3_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO3_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO3_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO3_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO3_VOLTAGE */
-#define PALMAS_LDO3_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO3_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO3_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO3_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO4_CTRL */
 #define PALMAS_LDO4_CTRL_WR_S					0x80
-#define PALMAS_LDO4_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO4_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO4_CTRL_STATUS					0x10
-#define PALMAS_LDO4_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO4_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO4_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO4_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO4_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO4_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO4_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO4_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO4_VOLTAGE */
-#define PALMAS_LDO4_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO4_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO4_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO4_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO5_CTRL */
 #define PALMAS_LDO5_CTRL_WR_S					0x80
-#define PALMAS_LDO5_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO5_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO5_CTRL_STATUS					0x10
-#define PALMAS_LDO5_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO5_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO5_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO5_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO5_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO5_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO5_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO5_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO5_VOLTAGE */
-#define PALMAS_LDO5_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO5_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO5_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO5_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO6_CTRL */
 #define PALMAS_LDO6_CTRL_WR_S					0x80
-#define PALMAS_LDO6_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO6_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO6_CTRL_LDO_VIB_EN				0x40
-#define PALMAS_LDO6_CTRL_LDO_VIB_EN_SHIFT			6
+#define PALMAS_LDO6_CTRL_LDO_VIB_EN_SHIFT			0x06
 #define PALMAS_LDO6_CTRL_STATUS					0x10
-#define PALMAS_LDO6_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO6_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO6_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO6_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO6_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO6_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO6_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO6_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO6_VOLTAGE */
-#define PALMAS_LDO6_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO6_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO6_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO6_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO7_CTRL */
 #define PALMAS_LDO7_CTRL_WR_S					0x80
-#define PALMAS_LDO7_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO7_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO7_CTRL_STATUS					0x10
-#define PALMAS_LDO7_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO7_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO7_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO7_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO7_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO7_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO7_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO7_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO7_VOLTAGE */
-#define PALMAS_LDO7_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO7_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO7_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO7_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO8_CTRL */
 #define PALMAS_LDO8_CTRL_WR_S					0x80
-#define PALMAS_LDO8_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO8_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO8_CTRL_LDO_TRACKING_EN			0x40
-#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN_SHIFT			6
+#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN_SHIFT			0x06
 #define PALMAS_LDO8_CTRL_STATUS					0x10
-#define PALMAS_LDO8_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO8_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO8_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO8_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO8_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO8_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO8_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO8_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO8_VOLTAGE */
-#define PALMAS_LDO8_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO8_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO8_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO8_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDO9_CTRL */
 #define PALMAS_LDO9_CTRL_WR_S					0x80
-#define PALMAS_LDO9_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDO9_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDO9_CTRL_LDO_BYPASS_EN				0x40
-#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN_SHIFT			6
+#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN_SHIFT			0x06
 #define PALMAS_LDO9_CTRL_STATUS					0x10
-#define PALMAS_LDO9_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDO9_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDO9_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDO9_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDO9_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDO9_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDO9_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDO9_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDO9_VOLTAGE */
-#define PALMAS_LDO9_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDO9_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDO9_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDO9_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDOLN_CTRL */
 #define PALMAS_LDOLN_CTRL_WR_S					0x80
-#define PALMAS_LDOLN_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDOLN_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDOLN_CTRL_STATUS				0x10
-#define PALMAS_LDOLN_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDOLN_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDOLN_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDOLN_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDOLN_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDOLN_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDOLN_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDOLN_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDOLN_VOLTAGE */
-#define PALMAS_LDOLN_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDOLN_VOLTAGE_VSEL_SHIFT				0
+#define PALMAS_LDOLN_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDOLN_VOLTAGE_VSEL_SHIFT				0x00
 
 /* Bit definitions for LDOUSB_CTRL */
 #define PALMAS_LDOUSB_CTRL_WR_S					0x80
-#define PALMAS_LDOUSB_CTRL_WR_S_SHIFT				7
+#define PALMAS_LDOUSB_CTRL_WR_S_SHIFT				0x07
 #define PALMAS_LDOUSB_CTRL_STATUS				0x10
-#define PALMAS_LDOUSB_CTRL_STATUS_SHIFT				4
+#define PALMAS_LDOUSB_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_LDOUSB_CTRL_MODE_SLEEP				0x04
-#define PALMAS_LDOUSB_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_LDOUSB_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_LDOUSB_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for LDOUSB_VOLTAGE */
-#define PALMAS_LDOUSB_VOLTAGE_VSEL_MASK				0x3f
-#define PALMAS_LDOUSB_VOLTAGE_VSEL_SHIFT			0
+#define PALMAS_LDOUSB_VOLTAGE_VSEL_MASK				0x3F
+#define PALMAS_LDOUSB_VOLTAGE_VSEL_SHIFT			0x00
 
 /* Bit definitions for LDO_CTRL */
 #define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS			0x01
-#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS_SHIFT		0
+#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS_SHIFT		0x00
 
 /* Bit definitions for LDO_PD_CTRL1 */
 #define PALMAS_LDO_PD_CTRL1_LDO8				0x80
-#define PALMAS_LDO_PD_CTRL1_LDO8_SHIFT				7
+#define PALMAS_LDO_PD_CTRL1_LDO8_SHIFT				0x07
 #define PALMAS_LDO_PD_CTRL1_LDO7				0x40
-#define PALMAS_LDO_PD_CTRL1_LDO7_SHIFT				6
+#define PALMAS_LDO_PD_CTRL1_LDO7_SHIFT				0x06
 #define PALMAS_LDO_PD_CTRL1_LDO6				0x20
-#define PALMAS_LDO_PD_CTRL1_LDO6_SHIFT				5
+#define PALMAS_LDO_PD_CTRL1_LDO6_SHIFT				0x05
 #define PALMAS_LDO_PD_CTRL1_LDO5				0x10
-#define PALMAS_LDO_PD_CTRL1_LDO5_SHIFT				4
+#define PALMAS_LDO_PD_CTRL1_LDO5_SHIFT				0x04
 #define PALMAS_LDO_PD_CTRL1_LDO4				0x08
-#define PALMAS_LDO_PD_CTRL1_LDO4_SHIFT				3
+#define PALMAS_LDO_PD_CTRL1_LDO4_SHIFT				0x03
 #define PALMAS_LDO_PD_CTRL1_LDO3				0x04
-#define PALMAS_LDO_PD_CTRL1_LDO3_SHIFT				2
+#define PALMAS_LDO_PD_CTRL1_LDO3_SHIFT				0x02
 #define PALMAS_LDO_PD_CTRL1_LDO2				0x02
-#define PALMAS_LDO_PD_CTRL1_LDO2_SHIFT				1
+#define PALMAS_LDO_PD_CTRL1_LDO2_SHIFT				0x01
 #define PALMAS_LDO_PD_CTRL1_LDO1				0x01
-#define PALMAS_LDO_PD_CTRL1_LDO1_SHIFT				0
+#define PALMAS_LDO_PD_CTRL1_LDO1_SHIFT				0x00
 
 /* Bit definitions for LDO_PD_CTRL2 */
 #define PALMAS_LDO_PD_CTRL2_LDOUSB				0x04
-#define PALMAS_LDO_PD_CTRL2_LDOUSB_SHIFT			2
+#define PALMAS_LDO_PD_CTRL2_LDOUSB_SHIFT			0x02
 #define PALMAS_LDO_PD_CTRL2_LDOLN				0x02
-#define PALMAS_LDO_PD_CTRL2_LDOLN_SHIFT				1
+#define PALMAS_LDO_PD_CTRL2_LDOLN_SHIFT				0x01
 #define PALMAS_LDO_PD_CTRL2_LDO9				0x01
-#define PALMAS_LDO_PD_CTRL2_LDO9_SHIFT				0
+#define PALMAS_LDO_PD_CTRL2_LDO9_SHIFT				0x00
 
 /* Bit definitions for LDO_SHORT_STATUS1 */
 #define PALMAS_LDO_SHORT_STATUS1_LDO8				0x80
-#define PALMAS_LDO_SHORT_STATUS1_LDO8_SHIFT			7
+#define PALMAS_LDO_SHORT_STATUS1_LDO8_SHIFT			0x07
 #define PALMAS_LDO_SHORT_STATUS1_LDO7				0x40
-#define PALMAS_LDO_SHORT_STATUS1_LDO7_SHIFT			6
+#define PALMAS_LDO_SHORT_STATUS1_LDO7_SHIFT			0x06
 #define PALMAS_LDO_SHORT_STATUS1_LDO6				0x20
-#define PALMAS_LDO_SHORT_STATUS1_LDO6_SHIFT			5
+#define PALMAS_LDO_SHORT_STATUS1_LDO6_SHIFT			0x05
 #define PALMAS_LDO_SHORT_STATUS1_LDO5				0x10
-#define PALMAS_LDO_SHORT_STATUS1_LDO5_SHIFT			4
+#define PALMAS_LDO_SHORT_STATUS1_LDO5_SHIFT			0x04
 #define PALMAS_LDO_SHORT_STATUS1_LDO4				0x08
-#define PALMAS_LDO_SHORT_STATUS1_LDO4_SHIFT			3
+#define PALMAS_LDO_SHORT_STATUS1_LDO4_SHIFT			0x03
 #define PALMAS_LDO_SHORT_STATUS1_LDO3				0x04
-#define PALMAS_LDO_SHORT_STATUS1_LDO3_SHIFT			2
+#define PALMAS_LDO_SHORT_STATUS1_LDO3_SHIFT			0x02
 #define PALMAS_LDO_SHORT_STATUS1_LDO2				0x02
-#define PALMAS_LDO_SHORT_STATUS1_LDO2_SHIFT			1
+#define PALMAS_LDO_SHORT_STATUS1_LDO2_SHIFT			0x01
 #define PALMAS_LDO_SHORT_STATUS1_LDO1				0x01
-#define PALMAS_LDO_SHORT_STATUS1_LDO1_SHIFT			0
+#define PALMAS_LDO_SHORT_STATUS1_LDO1_SHIFT			0x00
 
 /* Bit definitions for LDO_SHORT_STATUS2 */
 #define PALMAS_LDO_SHORT_STATUS2_LDOVANA			0x08
-#define PALMAS_LDO_SHORT_STATUS2_LDOVANA_SHIFT			3
+#define PALMAS_LDO_SHORT_STATUS2_LDOVANA_SHIFT			0x03
 #define PALMAS_LDO_SHORT_STATUS2_LDOUSB				0x04
-#define PALMAS_LDO_SHORT_STATUS2_LDOUSB_SHIFT			2
+#define PALMAS_LDO_SHORT_STATUS2_LDOUSB_SHIFT			0x02
 #define PALMAS_LDO_SHORT_STATUS2_LDOLN				0x02
-#define PALMAS_LDO_SHORT_STATUS2_LDOLN_SHIFT			1
+#define PALMAS_LDO_SHORT_STATUS2_LDOLN_SHIFT			0x01
 #define PALMAS_LDO_SHORT_STATUS2_LDO9				0x01
-#define PALMAS_LDO_SHORT_STATUS2_LDO9_SHIFT			0
+#define PALMAS_LDO_SHORT_STATUS2_LDO9_SHIFT			0x00
 
 /* Registers for function PMU_CONTROL */
-#define PALMAS_DEV_CTRL						0x0
-#define PALMAS_POWER_CTRL					0x1
-#define PALMAS_VSYS_LO						0x2
-#define PALMAS_VSYS_MON						0x3
-#define PALMAS_VBAT_MON						0x4
-#define PALMAS_WATCHDOG						0x5
-#define PALMAS_BOOT_STATUS					0x6
-#define PALMAS_BATTERY_BOUNCE					0x7
-#define PALMAS_BACKUP_BATTERY_CTRL				0x8
-#define PALMAS_LONG_PRESS_KEY					0x9
-#define PALMAS_OSC_THERM_CTRL					0xA
-#define PALMAS_BATDEBOUNCING					0xB
-#define PALMAS_SWOFF_HWRST					0xF
+#define PALMAS_DEV_CTRL						0x00
+#define PALMAS_POWER_CTRL					0x01
+#define PALMAS_VSYS_LO						0x02
+#define PALMAS_VSYS_MON						0x03
+#define PALMAS_VBAT_MON						0x04
+#define PALMAS_WATCHDOG						0x05
+#define PALMAS_BOOT_STATUS					0x06
+#define PALMAS_BATTERY_BOUNCE					0x07
+#define PALMAS_BACKUP_BATTERY_CTRL				0x08
+#define PALMAS_LONG_PRESS_KEY					0x09
+#define PALMAS_OSC_THERM_CTRL					0x0A
+#define PALMAS_BATDEBOUNCING					0x0B
+#define PALMAS_SWOFF_HWRST					0x0F
 #define PALMAS_SWOFF_COLDRST					0x10
 #define PALMAS_SWOFF_STATUS					0x11
 #define PALMAS_PMU_CONFIG					0x12
@@ -1296,668 +1296,668 @@ enum usb_irq_events {
 
 /* Bit definitions for DEV_CTRL */
 #define PALMAS_DEV_CTRL_DEV_STATUS_MASK				0x0c
-#define PALMAS_DEV_CTRL_DEV_STATUS_SHIFT			2
+#define PALMAS_DEV_CTRL_DEV_STATUS_SHIFT			0x02
 #define PALMAS_DEV_CTRL_SW_RST					0x02
-#define PALMAS_DEV_CTRL_SW_RST_SHIFT				1
+#define PALMAS_DEV_CTRL_SW_RST_SHIFT				0x01
 #define PALMAS_DEV_CTRL_DEV_ON					0x01
-#define PALMAS_DEV_CTRL_DEV_ON_SHIFT				0
+#define PALMAS_DEV_CTRL_DEV_ON_SHIFT				0x00
 
 /* Bit definitions for POWER_CTRL */
 #define PALMAS_POWER_CTRL_ENABLE2_MASK				0x04
-#define PALMAS_POWER_CTRL_ENABLE2_MASK_SHIFT			2
+#define PALMAS_POWER_CTRL_ENABLE2_MASK_SHIFT			0x02
 #define PALMAS_POWER_CTRL_ENABLE1_MASK				0x02
-#define PALMAS_POWER_CTRL_ENABLE1_MASK_SHIFT			1
+#define PALMAS_POWER_CTRL_ENABLE1_MASK_SHIFT			0x01
 #define PALMAS_POWER_CTRL_NSLEEP_MASK				0x01
-#define PALMAS_POWER_CTRL_NSLEEP_MASK_SHIFT			0
+#define PALMAS_POWER_CTRL_NSLEEP_MASK_SHIFT			0x00
 
 /* Bit definitions for VSYS_LO */
-#define PALMAS_VSYS_LO_THRESHOLD_MASK				0x1f
-#define PALMAS_VSYS_LO_THRESHOLD_SHIFT				0
+#define PALMAS_VSYS_LO_THRESHOLD_MASK				0x1F
+#define PALMAS_VSYS_LO_THRESHOLD_SHIFT				0x00
 
 /* Bit definitions for VSYS_MON */
 #define PALMAS_VSYS_MON_ENABLE					0x80
-#define PALMAS_VSYS_MON_ENABLE_SHIFT				7
-#define PALMAS_VSYS_MON_THRESHOLD_MASK				0x3f
-#define PALMAS_VSYS_MON_THRESHOLD_SHIFT				0
+#define PALMAS_VSYS_MON_ENABLE_SHIFT				0x07
+#define PALMAS_VSYS_MON_THRESHOLD_MASK				0x3F
+#define PALMAS_VSYS_MON_THRESHOLD_SHIFT				0x00
 
 /* Bit definitions for VBAT_MON */
 #define PALMAS_VBAT_MON_ENABLE					0x80
-#define PALMAS_VBAT_MON_ENABLE_SHIFT				7
-#define PALMAS_VBAT_MON_THRESHOLD_MASK				0x3f
-#define PALMAS_VBAT_MON_THRESHOLD_SHIFT				0
+#define PALMAS_VBAT_MON_ENABLE_SHIFT				0x07
+#define PALMAS_VBAT_MON_THRESHOLD_MASK				0x3F
+#define PALMAS_VBAT_MON_THRESHOLD_SHIFT				0x00
 
 /* Bit definitions for WATCHDOG */
 #define PALMAS_WATCHDOG_LOCK					0x20
-#define PALMAS_WATCHDOG_LOCK_SHIFT				5
+#define PALMAS_WATCHDOG_LOCK_SHIFT				0x05
 #define PALMAS_WATCHDOG_ENABLE					0x10
-#define PALMAS_WATCHDOG_ENABLE_SHIFT				4
+#define PALMAS_WATCHDOG_ENABLE_SHIFT				0x04
 #define PALMAS_WATCHDOG_MODE					0x08
-#define PALMAS_WATCHDOG_MODE_SHIFT				3
+#define PALMAS_WATCHDOG_MODE_SHIFT				0x03
 #define PALMAS_WATCHDOG_TIMER_MASK				0x07
-#define PALMAS_WATCHDOG_TIMER_SHIFT				0
+#define PALMAS_WATCHDOG_TIMER_SHIFT				0x00
 
 /* Bit definitions for BOOT_STATUS */
 #define PALMAS_BOOT_STATUS_BOOT1				0x02
-#define PALMAS_BOOT_STATUS_BOOT1_SHIFT				1
+#define PALMAS_BOOT_STATUS_BOOT1_SHIFT				0x01
 #define PALMAS_BOOT_STATUS_BOOT0				0x01
-#define PALMAS_BOOT_STATUS_BOOT0_SHIFT				0
+#define PALMAS_BOOT_STATUS_BOOT0_SHIFT				0x00
 
 /* Bit definitions for BATTERY_BOUNCE */
-#define PALMAS_BATTERY_BOUNCE_BB_DELAY_MASK			0x3f
-#define PALMAS_BATTERY_BOUNCE_BB_DELAY_SHIFT			0
+#define PALMAS_BATTERY_BOUNCE_BB_DELAY_MASK			0x3F
+#define PALMAS_BATTERY_BOUNCE_BB_DELAY_SHIFT			0x00
 
 /* Bit definitions for BACKUP_BATTERY_CTRL */
 #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15			0x80
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15_SHIFT		7
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15_SHIFT		0x07
 #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP			0x40
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP_SHIFT		6
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP_SHIFT		0x06
 #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF			0x20
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF_SHIFT		5
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF_SHIFT		0x05
 #define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN			0x10
-#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN_SHIFT		4
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN_SHIFT		0x04
 #define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG		0x08
-#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG_SHIFT	3
+#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG_SHIFT	0x03
 #define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_MASK			0x06
-#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_SHIFT			1
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_SHIFT			0x01
 #define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN			0x01
-#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN_SHIFT		0
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN_SHIFT		0x00
 
 /* Bit definitions for LONG_PRESS_KEY */
 #define PALMAS_LONG_PRESS_KEY_LPK_LOCK				0x80
-#define PALMAS_LONG_PRESS_KEY_LPK_LOCK_SHIFT			7
+#define PALMAS_LONG_PRESS_KEY_LPK_LOCK_SHIFT			0x07
 #define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR			0x10
-#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR_SHIFT			4
+#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR_SHIFT			0x04
 #define PALMAS_LONG_PRESS_KEY_LPK_TIME_MASK			0x0c
-#define PALMAS_LONG_PRESS_KEY_LPK_TIME_SHIFT			2
+#define PALMAS_LONG_PRESS_KEY_LPK_TIME_SHIFT			0x02
 #define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_MASK		0x03
-#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_SHIFT		0
+#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_SHIFT		0x00
 
 /* Bit definitions for OSC_THERM_CTRL */
 #define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP			0x80
-#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP_SHIFT		7
+#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP_SHIFT		0x07
 #define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP			0x40
-#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP_SHIFT		6
+#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP_SHIFT		0x06
 #define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP		0x20
-#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP_SHIFT		5
+#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP_SHIFT		0x05
 #define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP		0x10
-#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP_SHIFT		4
+#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP_SHIFT		0x04
 #define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_MASK			0x0c
-#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_SHIFT		2
+#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_SHIFT		0x02
 #define PALMAS_OSC_THERM_CTRL_OSC_BYPASS			0x02
-#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS_SHIFT			1
+#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS_SHIFT			0x01
 #define PALMAS_OSC_THERM_CTRL_OSC_HPMODE			0x01
-#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE_SHIFT			0
+#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE_SHIFT			0x00
 
 /* Bit definitions for BATDEBOUNCING */
 #define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS			0x80
-#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS_SHIFT		7
+#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS_SHIFT		0x07
 #define PALMAS_BATDEBOUNCING_BINS_DEB_MASK			0x78
-#define PALMAS_BATDEBOUNCING_BINS_DEB_SHIFT			3
+#define PALMAS_BATDEBOUNCING_BINS_DEB_SHIFT			0x03
 #define PALMAS_BATDEBOUNCING_BEXT_DEB_MASK			0x07
-#define PALMAS_BATDEBOUNCING_BEXT_DEB_SHIFT			0
+#define PALMAS_BATDEBOUNCING_BEXT_DEB_SHIFT			0x00
 
 /* Bit definitions for SWOFF_HWRST */
 #define PALMAS_SWOFF_HWRST_PWRON_LPK				0x80
-#define PALMAS_SWOFF_HWRST_PWRON_LPK_SHIFT			7
+#define PALMAS_SWOFF_HWRST_PWRON_LPK_SHIFT			0x07
 #define PALMAS_SWOFF_HWRST_PWRDOWN				0x40
-#define PALMAS_SWOFF_HWRST_PWRDOWN_SHIFT			6
+#define PALMAS_SWOFF_HWRST_PWRDOWN_SHIFT			0x06
 #define PALMAS_SWOFF_HWRST_WTD					0x20
-#define PALMAS_SWOFF_HWRST_WTD_SHIFT				5
+#define PALMAS_SWOFF_HWRST_WTD_SHIFT				0x05
 #define PALMAS_SWOFF_HWRST_TSHUT				0x10
-#define PALMAS_SWOFF_HWRST_TSHUT_SHIFT				4
+#define PALMAS_SWOFF_HWRST_TSHUT_SHIFT				0x04
 #define PALMAS_SWOFF_HWRST_RESET_IN				0x08
-#define PALMAS_SWOFF_HWRST_RESET_IN_SHIFT			3
+#define PALMAS_SWOFF_HWRST_RESET_IN_SHIFT			0x03
 #define PALMAS_SWOFF_HWRST_SW_RST				0x04
-#define PALMAS_SWOFF_HWRST_SW_RST_SHIFT				2
+#define PALMAS_SWOFF_HWRST_SW_RST_SHIFT				0x02
 #define PALMAS_SWOFF_HWRST_VSYS_LO				0x02
-#define PALMAS_SWOFF_HWRST_VSYS_LO_SHIFT			1
+#define PALMAS_SWOFF_HWRST_VSYS_LO_SHIFT			0x01
 #define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN			0x01
-#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN_SHIFT			0
+#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN_SHIFT			0x00
 
 /* Bit definitions for SWOFF_COLDRST */
 #define PALMAS_SWOFF_COLDRST_PWRON_LPK				0x80
-#define PALMAS_SWOFF_COLDRST_PWRON_LPK_SHIFT			7
+#define PALMAS_SWOFF_COLDRST_PWRON_LPK_SHIFT			0x07
 #define PALMAS_SWOFF_COLDRST_PWRDOWN				0x40
-#define PALMAS_SWOFF_COLDRST_PWRDOWN_SHIFT			6
+#define PALMAS_SWOFF_COLDRST_PWRDOWN_SHIFT			0x06
 #define PALMAS_SWOFF_COLDRST_WTD				0x20
-#define PALMAS_SWOFF_COLDRST_WTD_SHIFT				5
+#define PALMAS_SWOFF_COLDRST_WTD_SHIFT				0x05
 #define PALMAS_SWOFF_COLDRST_TSHUT				0x10
-#define PALMAS_SWOFF_COLDRST_TSHUT_SHIFT			4
+#define PALMAS_SWOFF_COLDRST_TSHUT_SHIFT			0x04
 #define PALMAS_SWOFF_COLDRST_RESET_IN				0x08
-#define PALMAS_SWOFF_COLDRST_RESET_IN_SHIFT			3
+#define PALMAS_SWOFF_COLDRST_RESET_IN_SHIFT			0x03
 #define PALMAS_SWOFF_COLDRST_SW_RST				0x04
-#define PALMAS_SWOFF_COLDRST_SW_RST_SHIFT			2
+#define PALMAS_SWOFF_COLDRST_SW_RST_SHIFT			0x02
 #define PALMAS_SWOFF_COLDRST_VSYS_LO				0x02
-#define PALMAS_SWOFF_COLDRST_VSYS_LO_SHIFT			1
+#define PALMAS_SWOFF_COLDRST_VSYS_LO_SHIFT			0x01
 #define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN			0x01
-#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN_SHIFT		0
+#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN_SHIFT		0x00
 
 /* Bit definitions for SWOFF_STATUS */
 #define PALMAS_SWOFF_STATUS_PWRON_LPK				0x80
-#define PALMAS_SWOFF_STATUS_PWRON_LPK_SHIFT			7
+#define PALMAS_SWOFF_STATUS_PWRON_LPK_SHIFT			0x07
 #define PALMAS_SWOFF_STATUS_PWRDOWN				0x40
-#define PALMAS_SWOFF_STATUS_PWRDOWN_SHIFT			6
+#define PALMAS_SWOFF_STATUS_PWRDOWN_SHIFT			0x06
 #define PALMAS_SWOFF_STATUS_WTD					0x20
-#define PALMAS_SWOFF_STATUS_WTD_SHIFT				5
+#define PALMAS_SWOFF_STATUS_WTD_SHIFT				0x05
 #define PALMAS_SWOFF_STATUS_TSHUT				0x10
-#define PALMAS_SWOFF_STATUS_TSHUT_SHIFT				4
+#define PALMAS_SWOFF_STATUS_TSHUT_SHIFT				0x04
 #define PALMAS_SWOFF_STATUS_RESET_IN				0x08
-#define PALMAS_SWOFF_STATUS_RESET_IN_SHIFT			3
+#define PALMAS_SWOFF_STATUS_RESET_IN_SHIFT			0x03
 #define PALMAS_SWOFF_STATUS_SW_RST				0x04
-#define PALMAS_SWOFF_STATUS_SW_RST_SHIFT			2
+#define PALMAS_SWOFF_STATUS_SW_RST_SHIFT			0x02
 #define PALMAS_SWOFF_STATUS_VSYS_LO				0x02
-#define PALMAS_SWOFF_STATUS_VSYS_LO_SHIFT			1
+#define PALMAS_SWOFF_STATUS_VSYS_LO_SHIFT			0x01
 #define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN			0x01
-#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN_SHIFT		0
+#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN_SHIFT		0x00
 
 /* Bit definitions for PMU_CONFIG */
 #define PALMAS_PMU_CONFIG_MULTI_CELL_EN				0x40
-#define PALMAS_PMU_CONFIG_MULTI_CELL_EN_SHIFT			6
+#define PALMAS_PMU_CONFIG_MULTI_CELL_EN_SHIFT			0x06
 #define PALMAS_PMU_CONFIG_SPARE_MASK				0x30
-#define PALMAS_PMU_CONFIG_SPARE_SHIFT				4
+#define PALMAS_PMU_CONFIG_SPARE_SHIFT				0x04
 #define PALMAS_PMU_CONFIG_SWOFF_DLY_MASK			0x0c
-#define PALMAS_PMU_CONFIG_SWOFF_DLY_SHIFT			2
+#define PALMAS_PMU_CONFIG_SWOFF_DLY_SHIFT			0x02
 #define PALMAS_PMU_CONFIG_GATE_RESET_OUT			0x02
-#define PALMAS_PMU_CONFIG_GATE_RESET_OUT_SHIFT			1
+#define PALMAS_PMU_CONFIG_GATE_RESET_OUT_SHIFT			0x01
 #define PALMAS_PMU_CONFIG_AUTODEVON				0x01
-#define PALMAS_PMU_CONFIG_AUTODEVON_SHIFT			0
+#define PALMAS_PMU_CONFIG_AUTODEVON_SHIFT			0x00
 
 /* Bit definitions for SPARE */
 #define PALMAS_SPARE_SPARE_MASK					0xf8
-#define PALMAS_SPARE_SPARE_SHIFT				3
+#define PALMAS_SPARE_SPARE_SHIFT				0x03
 #define PALMAS_SPARE_REGEN3_OD					0x04
-#define PALMAS_SPARE_REGEN3_OD_SHIFT				2
+#define PALMAS_SPARE_REGEN3_OD_SHIFT				0x02
 #define PALMAS_SPARE_REGEN2_OD					0x02
-#define PALMAS_SPARE_REGEN2_OD_SHIFT				1
+#define PALMAS_SPARE_REGEN2_OD_SHIFT				0x01
 #define PALMAS_SPARE_REGEN1_OD					0x01
-#define PALMAS_SPARE_REGEN1_OD_SHIFT				0
+#define PALMAS_SPARE_REGEN1_OD_SHIFT				0x00
 
 /* Bit definitions for PMU_SECONDARY_INT */
 #define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC		0x80
-#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC_SHIFT		7
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC_SHIFT		0x07
 #define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC		0x40
-#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC_SHIFT	6
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC_SHIFT	0x06
 #define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC			0x20
-#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC_SHIFT		5
+#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC_SHIFT		0x05
 #define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC			0x10
-#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC_SHIFT		4
+#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC_SHIFT		0x04
 #define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK			0x08
-#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK_SHIFT		3
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK_SHIFT		0x03
 #define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK		0x04
-#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK_SHIFT		2
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK_SHIFT		0x02
 #define PALMAS_PMU_SECONDARY_INT_BB_MASK			0x02
-#define PALMAS_PMU_SECONDARY_INT_BB_MASK_SHIFT			1
+#define PALMAS_PMU_SECONDARY_INT_BB_MASK_SHIFT			0x01
 #define PALMAS_PMU_SECONDARY_INT_FBI_MASK			0x01
-#define PALMAS_PMU_SECONDARY_INT_FBI_MASK_SHIFT			0
+#define PALMAS_PMU_SECONDARY_INT_FBI_MASK_SHIFT			0x00
 
 /* Bit definitions for SW_REVISION */
-#define PALMAS_SW_REVISION_SW_REVISION_MASK			0xff
-#define PALMAS_SW_REVISION_SW_REVISION_SHIFT			0
+#define PALMAS_SW_REVISION_SW_REVISION_MASK			0xFF
+#define PALMAS_SW_REVISION_SW_REVISION_SHIFT			0x00
 
 /* Bit definitions for EXT_CHRG_CTRL */
 #define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS			0x80
-#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS_SHIFT		7
+#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS_SHIFT		0x07
 #define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS			0x40
-#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS_SHIFT		6
+#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS_SHIFT		0x06
 #define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY		0x08
-#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY_SHIFT		3
+#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY_SHIFT		0x03
 #define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N				0x04
-#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N_SHIFT			2
+#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N_SHIFT			0x02
 #define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN			0x02
-#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN_SHIFT			1
+#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN_SHIFT			0x01
 #define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN			0x01
-#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN_SHIFT		0
+#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN_SHIFT		0x00
 
 /* Bit definitions for PMU_SECONDARY_INT2 */
 #define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC			0x20
-#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC_SHIFT		5
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC_SHIFT		0x05
 #define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC			0x10
-#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC_SHIFT		4
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC_SHIFT		0x04
 #define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK			0x02
-#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK_SHIFT		1
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK_SHIFT		0x01
 #define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK			0x01
-#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK_SHIFT		0
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK_SHIFT		0x00
 
 /* Registers for function RESOURCE */
-#define PALMAS_CLK32KG_CTRL					0x0
-#define PALMAS_CLK32KGAUDIO_CTRL				0x1
-#define PALMAS_REGEN1_CTRL					0x2
-#define PALMAS_REGEN2_CTRL					0x3
-#define PALMAS_SYSEN1_CTRL					0x4
-#define PALMAS_SYSEN2_CTRL					0x5
-#define PALMAS_NSLEEP_RES_ASSIGN				0x6
-#define PALMAS_NSLEEP_SMPS_ASSIGN				0x7
-#define PALMAS_NSLEEP_LDO_ASSIGN1				0x8
-#define PALMAS_NSLEEP_LDO_ASSIGN2				0x9
-#define PALMAS_ENABLE1_RES_ASSIGN				0xA
-#define PALMAS_ENABLE1_SMPS_ASSIGN				0xB
-#define PALMAS_ENABLE1_LDO_ASSIGN1				0xC
-#define PALMAS_ENABLE1_LDO_ASSIGN2				0xD
-#define PALMAS_ENABLE2_RES_ASSIGN				0xE
-#define PALMAS_ENABLE2_SMPS_ASSIGN				0xF
+#define PALMAS_CLK32KG_CTRL					0x00
+#define PALMAS_CLK32KGAUDIO_CTRL				0x01
+#define PALMAS_REGEN1_CTRL					0x02
+#define PALMAS_REGEN2_CTRL					0x03
+#define PALMAS_SYSEN1_CTRL					0x04
+#define PALMAS_SYSEN2_CTRL					0x05
+#define PALMAS_NSLEEP_RES_ASSIGN				0x06
+#define PALMAS_NSLEEP_SMPS_ASSIGN				0x07
+#define PALMAS_NSLEEP_LDO_ASSIGN1				0x08
+#define PALMAS_NSLEEP_LDO_ASSIGN2				0x09
+#define PALMAS_ENABLE1_RES_ASSIGN				0x0A
+#define PALMAS_ENABLE1_SMPS_ASSIGN				0x0B
+#define PALMAS_ENABLE1_LDO_ASSIGN1				0x0C
+#define PALMAS_ENABLE1_LDO_ASSIGN2				0x0D
+#define PALMAS_ENABLE2_RES_ASSIGN				0x0E
+#define PALMAS_ENABLE2_SMPS_ASSIGN				0x0F
 #define PALMAS_ENABLE2_LDO_ASSIGN1				0x10
 #define PALMAS_ENABLE2_LDO_ASSIGN2				0x11
 #define PALMAS_REGEN3_CTRL					0x12
 
 /* Bit definitions for CLK32KG_CTRL */
 #define PALMAS_CLK32KG_CTRL_STATUS				0x10
-#define PALMAS_CLK32KG_CTRL_STATUS_SHIFT			4
+#define PALMAS_CLK32KG_CTRL_STATUS_SHIFT			0x04
 #define PALMAS_CLK32KG_CTRL_MODE_SLEEP				0x04
-#define PALMAS_CLK32KG_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_CLK32KG_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_CLK32KG_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for CLK32KGAUDIO_CTRL */
 #define PALMAS_CLK32KGAUDIO_CTRL_STATUS				0x10
-#define PALMAS_CLK32KGAUDIO_CTRL_STATUS_SHIFT			4
+#define PALMAS_CLK32KGAUDIO_CTRL_STATUS_SHIFT			0x04
 #define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3			0x08
-#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3_SHIFT		3
+#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3_SHIFT		0x03
 #define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP			0x04
-#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP_SHIFT		2
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP_SHIFT		0x02
 #define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE			0x01
-#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE_SHIFT		0
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE_SHIFT		0x00
 
 /* Bit definitions for REGEN1_CTRL */
 #define PALMAS_REGEN1_CTRL_STATUS				0x10
-#define PALMAS_REGEN1_CTRL_STATUS_SHIFT				4
+#define PALMAS_REGEN1_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_REGEN1_CTRL_MODE_SLEEP				0x04
-#define PALMAS_REGEN1_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_REGEN1_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_REGEN1_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_REGEN1_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_REGEN1_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for REGEN2_CTRL */
 #define PALMAS_REGEN2_CTRL_STATUS				0x10
-#define PALMAS_REGEN2_CTRL_STATUS_SHIFT				4
+#define PALMAS_REGEN2_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_REGEN2_CTRL_MODE_SLEEP				0x04
-#define PALMAS_REGEN2_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_REGEN2_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_REGEN2_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_REGEN2_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_REGEN2_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SYSEN1_CTRL */
 #define PALMAS_SYSEN1_CTRL_STATUS				0x10
-#define PALMAS_SYSEN1_CTRL_STATUS_SHIFT				4
+#define PALMAS_SYSEN1_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SYSEN1_CTRL_MODE_SLEEP				0x04
-#define PALMAS_SYSEN1_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SYSEN1_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SYSEN1_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for SYSEN2_CTRL */
 #define PALMAS_SYSEN2_CTRL_STATUS				0x10
-#define PALMAS_SYSEN2_CTRL_STATUS_SHIFT				4
+#define PALMAS_SYSEN2_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_SYSEN2_CTRL_MODE_SLEEP				0x04
-#define PALMAS_SYSEN2_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_SYSEN2_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_SYSEN2_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Bit definitions for NSLEEP_RES_ASSIGN */
 #define PALMAS_NSLEEP_RES_ASSIGN_REGEN3				0x40
-#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3_SHIFT			6
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3_SHIFT			0x06
 #define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO			0x20
-#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO_SHIFT		5
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO_SHIFT		0x05
 #define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG			0x10
-#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG_SHIFT			4
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG_SHIFT			0x04
 #define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2				0x08
-#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2_SHIFT			3
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2_SHIFT			0x03
 #define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1				0x04
-#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1_SHIFT			2
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1_SHIFT			0x02
 #define PALMAS_NSLEEP_RES_ASSIGN_REGEN2				0x02
-#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2_SHIFT			1
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2_SHIFT			0x01
 #define PALMAS_NSLEEP_RES_ASSIGN_REGEN1				0x01
-#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1_SHIFT			0
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1_SHIFT			0x00
 
 /* Bit definitions for NSLEEP_SMPS_ASSIGN */
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10			0x80
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10_SHIFT			7
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10_SHIFT			0x07
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9				0x40
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9_SHIFT			6
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9_SHIFT			0x06
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8				0x20
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8_SHIFT			5
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8_SHIFT			0x05
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7				0x10
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7_SHIFT			4
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7_SHIFT			0x04
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6				0x08
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6_SHIFT			3
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6_SHIFT			0x03
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45			0x04
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45_SHIFT			2
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45_SHIFT			0x02
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3				0x02
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3_SHIFT			1
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3_SHIFT			0x01
 #define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12			0x01
-#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12_SHIFT			0
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12_SHIFT			0x00
 
 /* Bit definitions for NSLEEP_LDO_ASSIGN1 */
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8				0x80
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8_SHIFT			7
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8_SHIFT			0x07
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7				0x40
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7_SHIFT			6
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7_SHIFT			0x06
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6				0x20
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6_SHIFT			5
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6_SHIFT			0x05
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5				0x10
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5_SHIFT			4
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5_SHIFT			0x04
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4				0x08
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4_SHIFT			3
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4_SHIFT			0x03
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3				0x04
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3_SHIFT			2
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3_SHIFT			0x02
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2				0x02
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2_SHIFT			1
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2_SHIFT			0x01
 #define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1				0x01
-#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1_SHIFT			0
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1_SHIFT			0x00
 
 /* Bit definitions for NSLEEP_LDO_ASSIGN2 */
 #define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB			0x04
-#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB_SHIFT			2
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB_SHIFT			0x02
 #define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN				0x02
-#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN_SHIFT			1
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN_SHIFT			0x01
 #define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9				0x01
-#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9_SHIFT			0
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9_SHIFT			0x00
 
 /* Bit definitions for ENABLE1_RES_ASSIGN */
 #define PALMAS_ENABLE1_RES_ASSIGN_REGEN3			0x40
-#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3_SHIFT			6
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3_SHIFT			0x06
 #define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO			0x20
-#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO_SHIFT		5
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO_SHIFT		0x05
 #define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG			0x10
-#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG_SHIFT			4
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG_SHIFT			0x04
 #define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2			0x08
-#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2_SHIFT			3
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2_SHIFT			0x03
 #define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1			0x04
-#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1_SHIFT			2
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1_SHIFT			0x02
 #define PALMAS_ENABLE1_RES_ASSIGN_REGEN2			0x02
-#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2_SHIFT			1
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2_SHIFT			0x01
 #define PALMAS_ENABLE1_RES_ASSIGN_REGEN1			0x01
-#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1_SHIFT			0
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1_SHIFT			0x00
 
 /* Bit definitions for ENABLE1_SMPS_ASSIGN */
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10			0x80
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10_SHIFT			7
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10_SHIFT			0x07
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9			0x40
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9_SHIFT			6
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9_SHIFT			0x06
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8			0x20
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8_SHIFT			5
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8_SHIFT			0x05
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7			0x10
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7_SHIFT			4
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7_SHIFT			0x04
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6			0x08
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6_SHIFT			3
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6_SHIFT			0x03
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45			0x04
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45_SHIFT			2
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45_SHIFT			0x02
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3			0x02
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3_SHIFT			1
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3_SHIFT			0x01
 #define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12			0x01
-#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12_SHIFT			0
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12_SHIFT			0x00
 
 /* Bit definitions for ENABLE1_LDO_ASSIGN1 */
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8				0x80
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8_SHIFT			7
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8_SHIFT			0x07
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7				0x40
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7_SHIFT			6
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7_SHIFT			0x06
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6				0x20
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6_SHIFT			5
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6_SHIFT			0x05
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5				0x10
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5_SHIFT			4
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5_SHIFT			0x04
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4				0x08
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4_SHIFT			3
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4_SHIFT			0x03
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3				0x04
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3_SHIFT			2
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3_SHIFT			0x02
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2				0x02
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2_SHIFT			1
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2_SHIFT			0x01
 #define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1				0x01
-#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1_SHIFT			0
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1_SHIFT			0x00
 
 /* Bit definitions for ENABLE1_LDO_ASSIGN2 */
 #define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB			0x04
-#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB_SHIFT			2
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB_SHIFT			0x02
 #define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN			0x02
-#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN_SHIFT			1
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN_SHIFT			0x01
 #define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9				0x01
-#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9_SHIFT			0
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9_SHIFT			0x00
 
 /* Bit definitions for ENABLE2_RES_ASSIGN */
 #define PALMAS_ENABLE2_RES_ASSIGN_REGEN3			0x40
-#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3_SHIFT			6
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3_SHIFT			0x06
 #define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO			0x20
-#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO_SHIFT		5
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO_SHIFT		0x05
 #define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG			0x10
-#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG_SHIFT			4
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG_SHIFT			0x04
 #define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2			0x08
-#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2_SHIFT			3
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2_SHIFT			0x03
 #define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1			0x04
-#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1_SHIFT			2
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1_SHIFT			0x02
 #define PALMAS_ENABLE2_RES_ASSIGN_REGEN2			0x02
-#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2_SHIFT			1
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2_SHIFT			0x01
 #define PALMAS_ENABLE2_RES_ASSIGN_REGEN1			0x01
-#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1_SHIFT			0
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1_SHIFT			0x00
 
 /* Bit definitions for ENABLE2_SMPS_ASSIGN */
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10			0x80
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10_SHIFT			7
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10_SHIFT			0x07
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9			0x40
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9_SHIFT			6
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9_SHIFT			0x06
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8			0x20
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8_SHIFT			5
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8_SHIFT			0x05
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7			0x10
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7_SHIFT			4
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7_SHIFT			0x04
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6			0x08
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6_SHIFT			3
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6_SHIFT			0x03
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45			0x04
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45_SHIFT			2
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45_SHIFT			0x02
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3			0x02
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3_SHIFT			1
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3_SHIFT			0x01
 #define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12			0x01
-#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12_SHIFT			0
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12_SHIFT			0x00
 
 /* Bit definitions for ENABLE2_LDO_ASSIGN1 */
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8				0x80
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8_SHIFT			7
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8_SHIFT			0x07
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7				0x40
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7_SHIFT			6
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7_SHIFT			0x06
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6				0x20
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6_SHIFT			5
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6_SHIFT			0x05
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5				0x10
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5_SHIFT			4
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5_SHIFT			0x04
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4				0x08
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4_SHIFT			3
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4_SHIFT			0x03
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3				0x04
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3_SHIFT			2
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3_SHIFT			0x02
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2				0x02
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2_SHIFT			1
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2_SHIFT			0x01
 #define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1				0x01
-#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1_SHIFT			0
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1_SHIFT			0x00
 
 /* Bit definitions for ENABLE2_LDO_ASSIGN2 */
 #define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB			0x04
-#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB_SHIFT			2
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB_SHIFT			0x02
 #define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN			0x02
-#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN_SHIFT			1
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN_SHIFT			0x01
 #define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9				0x01
-#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9_SHIFT			0
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9_SHIFT			0x00
 
 /* Bit definitions for REGEN3_CTRL */
 #define PALMAS_REGEN3_CTRL_STATUS				0x10
-#define PALMAS_REGEN3_CTRL_STATUS_SHIFT				4
+#define PALMAS_REGEN3_CTRL_STATUS_SHIFT				0x04
 #define PALMAS_REGEN3_CTRL_MODE_SLEEP				0x04
-#define PALMAS_REGEN3_CTRL_MODE_SLEEP_SHIFT			2
+#define PALMAS_REGEN3_CTRL_MODE_SLEEP_SHIFT			0x02
 #define PALMAS_REGEN3_CTRL_MODE_ACTIVE				0x01
-#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT			0
+#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT			0x00
 
 /* Registers for function PAD_CONTROL */
-#define PALMAS_OD_OUTPUT_CTRL2					0x2
-#define PALMAS_POLARITY_CTRL2					0x3
-#define PALMAS_PU_PD_INPUT_CTRL1				0x4
-#define PALMAS_PU_PD_INPUT_CTRL2				0x5
-#define PALMAS_PU_PD_INPUT_CTRL3				0x6
-#define PALMAS_PU_PD_INPUT_CTRL5				0x7
-#define PALMAS_OD_OUTPUT_CTRL					0x8
-#define PALMAS_POLARITY_CTRL					0x9
-#define PALMAS_PRIMARY_SECONDARY_PAD1				0xA
-#define PALMAS_PRIMARY_SECONDARY_PAD2				0xB
-#define PALMAS_I2C_SPI						0xC
-#define PALMAS_PU_PD_INPUT_CTRL4				0xD
-#define PALMAS_PRIMARY_SECONDARY_PAD3				0xE
-#define PALMAS_PRIMARY_SECONDARY_PAD4				0xF
+#define PALMAS_OD_OUTPUT_CTRL2					0x02
+#define PALMAS_POLARITY_CTRL2					0x03
+#define PALMAS_PU_PD_INPUT_CTRL1				0x04
+#define PALMAS_PU_PD_INPUT_CTRL2				0x05
+#define PALMAS_PU_PD_INPUT_CTRL3				0x06
+#define PALMAS_PU_PD_INPUT_CTRL5				0x07
+#define PALMAS_OD_OUTPUT_CTRL					0x08
+#define PALMAS_POLARITY_CTRL					0x09
+#define PALMAS_PRIMARY_SECONDARY_PAD1				0x0A
+#define PALMAS_PRIMARY_SECONDARY_PAD2				0x0B
+#define PALMAS_I2C_SPI						0x0C
+#define PALMAS_PU_PD_INPUT_CTRL4				0x0D
+#define PALMAS_PRIMARY_SECONDARY_PAD3				0x0E
+#define PALMAS_PRIMARY_SECONDARY_PAD4				0x0F
 
 /* Bit definitions for PU_PD_INPUT_CTRL1 */
 #define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD			0x40
-#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD_SHIFT		6
+#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD_SHIFT		0x06
 #define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU			0x20
-#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU_SHIFT		5
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU_SHIFT		0x05
 #define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD			0x10
-#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD_SHIFT		4
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD_SHIFT		0x04
 #define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD			0x04
-#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD_SHIFT		2
+#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD_SHIFT		0x02
 #define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU			0x02
-#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU_SHIFT		1
+#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU_SHIFT		0x01
 
 /* Bit definitions for PU_PD_INPUT_CTRL2 */
 #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU			0x20
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU_SHIFT		5
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU_SHIFT		0x05
 #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD			0x10
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD_SHIFT		4
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD_SHIFT		0x04
 #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU			0x08
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU_SHIFT		3
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU_SHIFT		0x03
 #define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD			0x04
-#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD_SHIFT		2
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD_SHIFT		0x02
 #define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU			0x02
-#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU_SHIFT		1
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU_SHIFT		0x01
 #define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD			0x01
-#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD_SHIFT		0
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD_SHIFT		0x00
 
 /* Bit definitions for PU_PD_INPUT_CTRL3 */
 #define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD			0x40
-#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD_SHIFT			6
+#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD_SHIFT			0x06
 #define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD			0x10
-#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD_SHIFT		4
+#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD_SHIFT		0x04
 #define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD			0x04
-#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD_SHIFT		2
+#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD_SHIFT		0x02
 #define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD			0x01
-#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD_SHIFT		0
+#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD_SHIFT		0x00
 
 /* Bit definitions for OD_OUTPUT_CTRL */
 #define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD				0x80
-#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD_SHIFT			7
+#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD_SHIFT			0x07
 #define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD			0x40
-#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD_SHIFT			6
+#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD_SHIFT			0x06
 #define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD				0x20
-#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD_SHIFT			5
+#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD_SHIFT			0x05
 #define PALMAS_OD_OUTPUT_CTRL_INT_OD				0x08
-#define PALMAS_OD_OUTPUT_CTRL_INT_OD_SHIFT			3
+#define PALMAS_OD_OUTPUT_CTRL_INT_OD_SHIFT			0x03
 
 /* Bit definitions for POLARITY_CTRL */
 #define PALMAS_POLARITY_CTRL_INT_POLARITY			0x80
-#define PALMAS_POLARITY_CTRL_INT_POLARITY_SHIFT			7
+#define PALMAS_POLARITY_CTRL_INT_POLARITY_SHIFT			0x07
 #define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY			0x40
-#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY_SHIFT		6
+#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY_SHIFT		0x06
 #define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY			0x20
-#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY_SHIFT		5
+#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY_SHIFT		0x05
 #define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY			0x10
-#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY_SHIFT		4
+#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY_SHIFT		0x04
 #define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY			0x08
-#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY_SHIFT		3
+#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY_SHIFT		0x03
 #define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY		0x04
-#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY_SHIFT	2
+#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY_SHIFT	0x02
 #define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY	0x02
-#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY_SHIFT	1
+#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY_SHIFT	0x01
 #define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY			0x01
-#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY_SHIFT		0
+#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY_SHIFT		0x00
 
 /* Bit definitions for PRIMARY_SECONDARY_PAD1 */
 #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3			0x80
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3_SHIFT		7
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3_SHIFT		0x07
 #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_MASK		0x60
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_SHIFT		5
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_SHIFT		0x05
 #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK		0x18
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT		3
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT		0x03
 #define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0			0x04
-#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0_SHIFT		2
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0_SHIFT		0x02
 #define PALMAS_PRIMARY_SECONDARY_PAD1_VAC			0x02
-#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC_SHIFT			1
+#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC_SHIFT			0x01
 #define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD			0x01
-#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD_SHIFT		0
+#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD_SHIFT		0x00
 
 /* Bit definitions for PRIMARY_SECONDARY_PAD2 */
 #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK		0x30
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_SHIFT		4
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_SHIFT		0x04
 #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6			0x08
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6_SHIFT		3
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6_SHIFT		0x03
 #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_MASK		0x06
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_SHIFT		1
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_SHIFT		0x01
 #define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4			0x01
-#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4_SHIFT		0
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4_SHIFT		0x00
 
 /* Bit definitions for I2C_SPI */
 #define PALMAS_I2C_SPI_I2C2OTP_EN				0x80
-#define PALMAS_I2C_SPI_I2C2OTP_EN_SHIFT				7
+#define PALMAS_I2C_SPI_I2C2OTP_EN_SHIFT				0x07
 #define PALMAS_I2C_SPI_I2C2OTP_PAGESEL				0x40
-#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL_SHIFT			6
+#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL_SHIFT			0x06
 #define PALMAS_I2C_SPI_ID_I2C2					0x20
-#define PALMAS_I2C_SPI_ID_I2C2_SHIFT				5
+#define PALMAS_I2C_SPI_ID_I2C2_SHIFT				0x05
 #define PALMAS_I2C_SPI_I2C_SPI					0x10
-#define PALMAS_I2C_SPI_I2C_SPI_SHIFT				4
-#define PALMAS_I2C_SPI_ID_I2C1_MASK				0x0f
-#define PALMAS_I2C_SPI_ID_I2C1_SHIFT				0
+#define PALMAS_I2C_SPI_I2C_SPI_SHIFT				0x04
+#define PALMAS_I2C_SPI_ID_I2C1_MASK				0x0F
+#define PALMAS_I2C_SPI_ID_I2C1_SHIFT				0x00
 
 /* Bit definitions for PU_PD_INPUT_CTRL4 */
 #define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD			0x40
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD_SHIFT		6
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD_SHIFT		0x06
 #define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD			0x10
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD_SHIFT		4
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD_SHIFT		0x04
 #define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD			0x04
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD_SHIFT		2
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD_SHIFT		0x02
 #define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD			0x01
-#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD_SHIFT		0
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD_SHIFT		0x00
 
 /* Bit definitions for PRIMARY_SECONDARY_PAD3 */
 #define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2			0x02
-#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2_SHIFT		1
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2_SHIFT		0x01
 #define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1			0x01
-#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1_SHIFT		0
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1_SHIFT		0x00
 
 /* Registers for function LED_PWM */
-#define PALMAS_LED_PERIOD_CTRL					0x0
-#define PALMAS_LED_CTRL						0x1
-#define PALMAS_PWM_CTRL1					0x2
-#define PALMAS_PWM_CTRL2					0x3
+#define PALMAS_LED_PERIOD_CTRL					0x00
+#define PALMAS_LED_CTRL						0x01
+#define PALMAS_PWM_CTRL1					0x02
+#define PALMAS_PWM_CTRL2					0x03
 
 /* Bit definitions for LED_PERIOD_CTRL */
 #define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_MASK		0x38
-#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_SHIFT		3
+#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_SHIFT		0x03
 #define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_MASK		0x07
-#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_SHIFT		0
+#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_SHIFT		0x00
 
 /* Bit definitions for LED_CTRL */
 #define PALMAS_LED_CTRL_LED_2_SEQ				0x20
-#define PALMAS_LED_CTRL_LED_2_SEQ_SHIFT				5
+#define PALMAS_LED_CTRL_LED_2_SEQ_SHIFT				0x05
 #define PALMAS_LED_CTRL_LED_1_SEQ				0x10
-#define PALMAS_LED_CTRL_LED_1_SEQ_SHIFT				4
+#define PALMAS_LED_CTRL_LED_1_SEQ_SHIFT				0x04
 #define PALMAS_LED_CTRL_LED_2_ON_TIME_MASK			0x0c
-#define PALMAS_LED_CTRL_LED_2_ON_TIME_SHIFT			2
+#define PALMAS_LED_CTRL_LED_2_ON_TIME_SHIFT			0x02
 #define PALMAS_LED_CTRL_LED_1_ON_TIME_MASK			0x03
-#define PALMAS_LED_CTRL_LED_1_ON_TIME_SHIFT			0
+#define PALMAS_LED_CTRL_LED_1_ON_TIME_SHIFT			0x00
 
 /* Bit definitions for PWM_CTRL1 */
 #define PALMAS_PWM_CTRL1_PWM_FREQ_EN				0x02
-#define PALMAS_PWM_CTRL1_PWM_FREQ_EN_SHIFT			1
+#define PALMAS_PWM_CTRL1_PWM_FREQ_EN_SHIFT			0x01
 #define PALMAS_PWM_CTRL1_PWM_FREQ_SEL				0x01
-#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL_SHIFT			0
+#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL_SHIFT			0x00
 
 /* Bit definitions for PWM_CTRL2 */
-#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_MASK			0xff
-#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_SHIFT			0
+#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_MASK			0xFF
+#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_SHIFT			0x00
 
 /* Registers for function INTERRUPT */
-#define PALMAS_INT1_STATUS					0x0
-#define PALMAS_INT1_MASK					0x1
-#define PALMAS_INT1_LINE_STATE					0x2
-#define PALMAS_INT1_EDGE_DETECT1_RESERVED			0x3
-#define PALMAS_INT1_EDGE_DETECT2_RESERVED			0x4
-#define PALMAS_INT2_STATUS					0x5
-#define PALMAS_INT2_MASK					0x6
-#define PALMAS_INT2_LINE_STATE					0x7
-#define PALMAS_INT2_EDGE_DETECT1_RESERVED			0x8
-#define PALMAS_INT2_EDGE_DETECT2_RESERVED			0x9
-#define PALMAS_INT3_STATUS					0xA
-#define PALMAS_INT3_MASK					0xB
-#define PALMAS_INT3_LINE_STATE					0xC
-#define PALMAS_INT3_EDGE_DETECT1_RESERVED			0xD
-#define PALMAS_INT3_EDGE_DETECT2_RESERVED			0xE
-#define PALMAS_INT4_STATUS					0xF
+#define PALMAS_INT1_STATUS					0x00
+#define PALMAS_INT1_MASK					0x01
+#define PALMAS_INT1_LINE_STATE					0x02
+#define PALMAS_INT1_EDGE_DETECT1_RESERVED			0x03
+#define PALMAS_INT1_EDGE_DETECT2_RESERVED			0x04
+#define PALMAS_INT2_STATUS					0x05
+#define PALMAS_INT2_MASK					0x06
+#define PALMAS_INT2_LINE_STATE					0x07
+#define PALMAS_INT2_EDGE_DETECT1_RESERVED			0x08
+#define PALMAS_INT2_EDGE_DETECT2_RESERVED			0x09
+#define PALMAS_INT3_STATUS					0x0A
+#define PALMAS_INT3_MASK					0x0B
+#define PALMAS_INT3_LINE_STATE					0x0C
+#define PALMAS_INT3_EDGE_DETECT1_RESERVED			0x0D
+#define PALMAS_INT3_EDGE_DETECT2_RESERVED			0x0E
+#define PALMAS_INT4_STATUS					0x0F
 #define PALMAS_INT4_MASK					0x10
 #define PALMAS_INT4_LINE_STATE					0x11
 #define PALMAS_INT4_EDGE_DETECT1				0x12
@@ -1966,276 +1966,276 @@ enum usb_irq_events {
 
 /* Bit definitions for INT1_STATUS */
 #define PALMAS_INT1_STATUS_VBAT_MON				0x80
-#define PALMAS_INT1_STATUS_VBAT_MON_SHIFT			7
+#define PALMAS_INT1_STATUS_VBAT_MON_SHIFT			0x07
 #define PALMAS_INT1_STATUS_VSYS_MON				0x40
-#define PALMAS_INT1_STATUS_VSYS_MON_SHIFT			6
+#define PALMAS_INT1_STATUS_VSYS_MON_SHIFT			0x06
 #define PALMAS_INT1_STATUS_HOTDIE				0x20
-#define PALMAS_INT1_STATUS_HOTDIE_SHIFT				5
+#define PALMAS_INT1_STATUS_HOTDIE_SHIFT				0x05
 #define PALMAS_INT1_STATUS_PWRDOWN				0x10
-#define PALMAS_INT1_STATUS_PWRDOWN_SHIFT			4
+#define PALMAS_INT1_STATUS_PWRDOWN_SHIFT			0x04
 #define PALMAS_INT1_STATUS_RPWRON				0x08
-#define PALMAS_INT1_STATUS_RPWRON_SHIFT				3
+#define PALMAS_INT1_STATUS_RPWRON_SHIFT				0x03
 #define PALMAS_INT1_STATUS_LONG_PRESS_KEY			0x04
-#define PALMAS_INT1_STATUS_LONG_PRESS_KEY_SHIFT			2
+#define PALMAS_INT1_STATUS_LONG_PRESS_KEY_SHIFT			0x02
 #define PALMAS_INT1_STATUS_PWRON				0x02
-#define PALMAS_INT1_STATUS_PWRON_SHIFT				1
+#define PALMAS_INT1_STATUS_PWRON_SHIFT				0x01
 #define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV			0x01
-#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV_SHIFT		0
+#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV_SHIFT		0x00
 
 /* Bit definitions for INT1_MASK */
 #define PALMAS_INT1_MASK_VBAT_MON				0x80
-#define PALMAS_INT1_MASK_VBAT_MON_SHIFT				7
+#define PALMAS_INT1_MASK_VBAT_MON_SHIFT				0x07
 #define PALMAS_INT1_MASK_VSYS_MON				0x40
-#define PALMAS_INT1_MASK_VSYS_MON_SHIFT				6
+#define PALMAS_INT1_MASK_VSYS_MON_SHIFT				0x06
 #define PALMAS_INT1_MASK_HOTDIE					0x20
-#define PALMAS_INT1_MASK_HOTDIE_SHIFT				5
+#define PALMAS_INT1_MASK_HOTDIE_SHIFT				0x05
 #define PALMAS_INT1_MASK_PWRDOWN				0x10
-#define PALMAS_INT1_MASK_PWRDOWN_SHIFT				4
+#define PALMAS_INT1_MASK_PWRDOWN_SHIFT				0x04
 #define PALMAS_INT1_MASK_RPWRON					0x08
-#define PALMAS_INT1_MASK_RPWRON_SHIFT				3
+#define PALMAS_INT1_MASK_RPWRON_SHIFT				0x03
 #define PALMAS_INT1_MASK_LONG_PRESS_KEY				0x04
-#define PALMAS_INT1_MASK_LONG_PRESS_KEY_SHIFT			2
+#define PALMAS_INT1_MASK_LONG_PRESS_KEY_SHIFT			0x02
 #define PALMAS_INT1_MASK_PWRON					0x02
-#define PALMAS_INT1_MASK_PWRON_SHIFT				1
+#define PALMAS_INT1_MASK_PWRON_SHIFT				0x01
 #define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV			0x01
-#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV_SHIFT		0
+#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV_SHIFT		0x00
 
 /* Bit definitions for INT1_LINE_STATE */
 #define PALMAS_INT1_LINE_STATE_VBAT_MON				0x80
-#define PALMAS_INT1_LINE_STATE_VBAT_MON_SHIFT			7
+#define PALMAS_INT1_LINE_STATE_VBAT_MON_SHIFT			0x07
 #define PALMAS_INT1_LINE_STATE_VSYS_MON				0x40
-#define PALMAS_INT1_LINE_STATE_VSYS_MON_SHIFT			6
+#define PALMAS_INT1_LINE_STATE_VSYS_MON_SHIFT			0x06
 #define PALMAS_INT1_LINE_STATE_HOTDIE				0x20
-#define PALMAS_INT1_LINE_STATE_HOTDIE_SHIFT			5
+#define PALMAS_INT1_LINE_STATE_HOTDIE_SHIFT			0x05
 #define PALMAS_INT1_LINE_STATE_PWRDOWN				0x10
-#define PALMAS_INT1_LINE_STATE_PWRDOWN_SHIFT			4
+#define PALMAS_INT1_LINE_STATE_PWRDOWN_SHIFT			0x04
 #define PALMAS_INT1_LINE_STATE_RPWRON				0x08
-#define PALMAS_INT1_LINE_STATE_RPWRON_SHIFT			3
+#define PALMAS_INT1_LINE_STATE_RPWRON_SHIFT			0x03
 #define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY			0x04
-#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY_SHIFT		2
+#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY_SHIFT		0x02
 #define PALMAS_INT1_LINE_STATE_PWRON				0x02
-#define PALMAS_INT1_LINE_STATE_PWRON_SHIFT			1
+#define PALMAS_INT1_LINE_STATE_PWRON_SHIFT			0x01
 #define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV		0x01
-#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV_SHIFT	0
+#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV_SHIFT	0x00
 
 /* Bit definitions for INT2_STATUS */
 #define PALMAS_INT2_STATUS_VAC_ACOK				0x80
-#define PALMAS_INT2_STATUS_VAC_ACOK_SHIFT			7
+#define PALMAS_INT2_STATUS_VAC_ACOK_SHIFT			0x07
 #define PALMAS_INT2_STATUS_SHORT				0x40
-#define PALMAS_INT2_STATUS_SHORT_SHIFT				6
+#define PALMAS_INT2_STATUS_SHORT_SHIFT				0x06
 #define PALMAS_INT2_STATUS_FBI_BB				0x20
-#define PALMAS_INT2_STATUS_FBI_BB_SHIFT				5
+#define PALMAS_INT2_STATUS_FBI_BB_SHIFT				0x05
 #define PALMAS_INT2_STATUS_RESET_IN				0x10
-#define PALMAS_INT2_STATUS_RESET_IN_SHIFT			4
+#define PALMAS_INT2_STATUS_RESET_IN_SHIFT			0x04
 #define PALMAS_INT2_STATUS_BATREMOVAL				0x08
-#define PALMAS_INT2_STATUS_BATREMOVAL_SHIFT			3
+#define PALMAS_INT2_STATUS_BATREMOVAL_SHIFT			0x03
 #define PALMAS_INT2_STATUS_WDT					0x04
-#define PALMAS_INT2_STATUS_WDT_SHIFT				2
+#define PALMAS_INT2_STATUS_WDT_SHIFT				0x02
 #define PALMAS_INT2_STATUS_RTC_TIMER				0x02
-#define PALMAS_INT2_STATUS_RTC_TIMER_SHIFT			1
+#define PALMAS_INT2_STATUS_RTC_TIMER_SHIFT			0x01
 #define PALMAS_INT2_STATUS_RTC_ALARM				0x01
-#define PALMAS_INT2_STATUS_RTC_ALARM_SHIFT			0
+#define PALMAS_INT2_STATUS_RTC_ALARM_SHIFT			0x00
 
 /* Bit definitions for INT2_MASK */
 #define PALMAS_INT2_MASK_VAC_ACOK				0x80
-#define PALMAS_INT2_MASK_VAC_ACOK_SHIFT				7
+#define PALMAS_INT2_MASK_VAC_ACOK_SHIFT				0x07
 #define PALMAS_INT2_MASK_SHORT					0x40
-#define PALMAS_INT2_MASK_SHORT_SHIFT				6
+#define PALMAS_INT2_MASK_SHORT_SHIFT				0x06
 #define PALMAS_INT2_MASK_FBI_BB					0x20
-#define PALMAS_INT2_MASK_FBI_BB_SHIFT				5
+#define PALMAS_INT2_MASK_FBI_BB_SHIFT				0x05
 #define PALMAS_INT2_MASK_RESET_IN				0x10
-#define PALMAS_INT2_MASK_RESET_IN_SHIFT				4
+#define PALMAS_INT2_MASK_RESET_IN_SHIFT				0x04
 #define PALMAS_INT2_MASK_BATREMOVAL				0x08
-#define PALMAS_INT2_MASK_BATREMOVAL_SHIFT			3
+#define PALMAS_INT2_MASK_BATREMOVAL_SHIFT			0x03
 #define PALMAS_INT2_MASK_WDT					0x04
-#define PALMAS_INT2_MASK_WDT_SHIFT				2
+#define PALMAS_INT2_MASK_WDT_SHIFT				0x02
 #define PALMAS_INT2_MASK_RTC_TIMER				0x02
-#define PALMAS_INT2_MASK_RTC_TIMER_SHIFT			1
+#define PALMAS_INT2_MASK_RTC_TIMER_SHIFT			0x01
 #define PALMAS_INT2_MASK_RTC_ALARM				0x01
-#define PALMAS_INT2_MASK_RTC_ALARM_SHIFT			0
+#define PALMAS_INT2_MASK_RTC_ALARM_SHIFT			0x00
 
 /* Bit definitions for INT2_LINE_STATE */
 #define PALMAS_INT2_LINE_STATE_VAC_ACOK				0x80
-#define PALMAS_INT2_LINE_STATE_VAC_ACOK_SHIFT			7
+#define PALMAS_INT2_LINE_STATE_VAC_ACOK_SHIFT			0x07
 #define PALMAS_INT2_LINE_STATE_SHORT				0x40
-#define PALMAS_INT2_LINE_STATE_SHORT_SHIFT			6
+#define PALMAS_INT2_LINE_STATE_SHORT_SHIFT			0x06
 #define PALMAS_INT2_LINE_STATE_FBI_BB				0x20
-#define PALMAS_INT2_LINE_STATE_FBI_BB_SHIFT			5
+#define PALMAS_INT2_LINE_STATE_FBI_BB_SHIFT			0x05
 #define PALMAS_INT2_LINE_STATE_RESET_IN				0x10
-#define PALMAS_INT2_LINE_STATE_RESET_IN_SHIFT			4
+#define PALMAS_INT2_LINE_STATE_RESET_IN_SHIFT			0x04
 #define PALMAS_INT2_LINE_STATE_BATREMOVAL			0x08
-#define PALMAS_INT2_LINE_STATE_BATREMOVAL_SHIFT			3
+#define PALMAS_INT2_LINE_STATE_BATREMOVAL_SHIFT			0x03
 #define PALMAS_INT2_LINE_STATE_WDT				0x04
-#define PALMAS_INT2_LINE_STATE_WDT_SHIFT			2
+#define PALMAS_INT2_LINE_STATE_WDT_SHIFT			0x02
 #define PALMAS_INT2_LINE_STATE_RTC_TIMER			0x02
-#define PALMAS_INT2_LINE_STATE_RTC_TIMER_SHIFT			1
+#define PALMAS_INT2_LINE_STATE_RTC_TIMER_SHIFT			0x01
 #define PALMAS_INT2_LINE_STATE_RTC_ALARM			0x01
-#define PALMAS_INT2_LINE_STATE_RTC_ALARM_SHIFT			0
+#define PALMAS_INT2_LINE_STATE_RTC_ALARM_SHIFT			0x00
 
 /* Bit definitions for INT3_STATUS */
 #define PALMAS_INT3_STATUS_VBUS					0x80
-#define PALMAS_INT3_STATUS_VBUS_SHIFT				7
+#define PALMAS_INT3_STATUS_VBUS_SHIFT				0x07
 #define PALMAS_INT3_STATUS_VBUS_OTG				0x40
-#define PALMAS_INT3_STATUS_VBUS_OTG_SHIFT			6
+#define PALMAS_INT3_STATUS_VBUS_OTG_SHIFT			0x06
 #define PALMAS_INT3_STATUS_ID					0x20
-#define PALMAS_INT3_STATUS_ID_SHIFT				5
+#define PALMAS_INT3_STATUS_ID_SHIFT				0x05
 #define PALMAS_INT3_STATUS_ID_OTG				0x10
-#define PALMAS_INT3_STATUS_ID_OTG_SHIFT				4
+#define PALMAS_INT3_STATUS_ID_OTG_SHIFT				0x04
 #define PALMAS_INT3_STATUS_GPADC_EOC_RT				0x08
-#define PALMAS_INT3_STATUS_GPADC_EOC_RT_SHIFT			3
+#define PALMAS_INT3_STATUS_GPADC_EOC_RT_SHIFT			0x03
 #define PALMAS_INT3_STATUS_GPADC_EOC_SW				0x04
-#define PALMAS_INT3_STATUS_GPADC_EOC_SW_SHIFT			2
+#define PALMAS_INT3_STATUS_GPADC_EOC_SW_SHIFT			0x02
 #define PALMAS_INT3_STATUS_GPADC_AUTO_1				0x02
-#define PALMAS_INT3_STATUS_GPADC_AUTO_1_SHIFT			1
+#define PALMAS_INT3_STATUS_GPADC_AUTO_1_SHIFT			0x01
 #define PALMAS_INT3_STATUS_GPADC_AUTO_0				0x01
-#define PALMAS_INT3_STATUS_GPADC_AUTO_0_SHIFT			0
+#define PALMAS_INT3_STATUS_GPADC_AUTO_0_SHIFT			0x00
 
 /* Bit definitions for INT3_MASK */
 #define PALMAS_INT3_MASK_VBUS					0x80
-#define PALMAS_INT3_MASK_VBUS_SHIFT				7
+#define PALMAS_INT3_MASK_VBUS_SHIFT				0x07
 #define PALMAS_INT3_MASK_VBUS_OTG				0x40
-#define PALMAS_INT3_MASK_VBUS_OTG_SHIFT				6
+#define PALMAS_INT3_MASK_VBUS_OTG_SHIFT				0x06
 #define PALMAS_INT3_MASK_ID					0x20
-#define PALMAS_INT3_MASK_ID_SHIFT				5
+#define PALMAS_INT3_MASK_ID_SHIFT				0x05
 #define PALMAS_INT3_MASK_ID_OTG					0x10
-#define PALMAS_INT3_MASK_ID_OTG_SHIFT				4
+#define PALMAS_INT3_MASK_ID_OTG_SHIFT				0x04
 #define PALMAS_INT3_MASK_GPADC_EOC_RT				0x08
-#define PALMAS_INT3_MASK_GPADC_EOC_RT_SHIFT			3
+#define PALMAS_INT3_MASK_GPADC_EOC_RT_SHIFT			0x03
 #define PALMAS_INT3_MASK_GPADC_EOC_SW				0x04
-#define PALMAS_INT3_MASK_GPADC_EOC_SW_SHIFT			2
+#define PALMAS_INT3_MASK_GPADC_EOC_SW_SHIFT			0x02
 #define PALMAS_INT3_MASK_GPADC_AUTO_1				0x02
-#define PALMAS_INT3_MASK_GPADC_AUTO_1_SHIFT			1
+#define PALMAS_INT3_MASK_GPADC_AUTO_1_SHIFT			0x01
 #define PALMAS_INT3_MASK_GPADC_AUTO_0				0x01
-#define PALMAS_INT3_MASK_GPADC_AUTO_0_SHIFT			0
+#define PALMAS_INT3_MASK_GPADC_AUTO_0_SHIFT			0x00
 
 /* Bit definitions for INT3_LINE_STATE */
 #define PALMAS_INT3_LINE_STATE_VBUS				0x80
-#define PALMAS_INT3_LINE_STATE_VBUS_SHIFT			7
+#define PALMAS_INT3_LINE_STATE_VBUS_SHIFT			0x07
 #define PALMAS_INT3_LINE_STATE_VBUS_OTG				0x40
-#define PALMAS_INT3_LINE_STATE_VBUS_OTG_SHIFT			6
+#define PALMAS_INT3_LINE_STATE_VBUS_OTG_SHIFT			0x06
 #define PALMAS_INT3_LINE_STATE_ID				0x20
-#define PALMAS_INT3_LINE_STATE_ID_SHIFT				5
+#define PALMAS_INT3_LINE_STATE_ID_SHIFT				0x05
 #define PALMAS_INT3_LINE_STATE_ID_OTG				0x10
-#define PALMAS_INT3_LINE_STATE_ID_OTG_SHIFT			4
+#define PALMAS_INT3_LINE_STATE_ID_OTG_SHIFT			0x04
 #define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT			0x08
-#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT_SHIFT		3
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT_SHIFT		0x03
 #define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW			0x04
-#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW_SHIFT		2
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW_SHIFT		0x02
 #define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1			0x02
-#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1_SHIFT		1
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1_SHIFT		0x01
 #define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0			0x01
-#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0_SHIFT		0
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0_SHIFT		0x00
 
 /* Bit definitions for INT4_STATUS */
 #define PALMAS_INT4_STATUS_GPIO_7				0x80
-#define PALMAS_INT4_STATUS_GPIO_7_SHIFT				7
+#define PALMAS_INT4_STATUS_GPIO_7_SHIFT				0x07
 #define PALMAS_INT4_STATUS_GPIO_6				0x40
-#define PALMAS_INT4_STATUS_GPIO_6_SHIFT				6
+#define PALMAS_INT4_STATUS_GPIO_6_SHIFT				0x06
 #define PALMAS_INT4_STATUS_GPIO_5				0x20
-#define PALMAS_INT4_STATUS_GPIO_5_SHIFT				5
+#define PALMAS_INT4_STATUS_GPIO_5_SHIFT				0x05
 #define PALMAS_INT4_STATUS_GPIO_4				0x10
-#define PALMAS_INT4_STATUS_GPIO_4_SHIFT				4
+#define PALMAS_INT4_STATUS_GPIO_4_SHIFT				0x04
 #define PALMAS_INT4_STATUS_GPIO_3				0x08
-#define PALMAS_INT4_STATUS_GPIO_3_SHIFT				3
+#define PALMAS_INT4_STATUS_GPIO_3_SHIFT				0x03
 #define PALMAS_INT4_STATUS_GPIO_2				0x04
-#define PALMAS_INT4_STATUS_GPIO_2_SHIFT				2
+#define PALMAS_INT4_STATUS_GPIO_2_SHIFT				0x02
 #define PALMAS_INT4_STATUS_GPIO_1				0x02
-#define PALMAS_INT4_STATUS_GPIO_1_SHIFT				1
+#define PALMAS_INT4_STATUS_GPIO_1_SHIFT				0x01
 #define PALMAS_INT4_STATUS_GPIO_0				0x01
-#define PALMAS_INT4_STATUS_GPIO_0_SHIFT				0
+#define PALMAS_INT4_STATUS_GPIO_0_SHIFT				0x00
 
 /* Bit definitions for INT4_MASK */
 #define PALMAS_INT4_MASK_GPIO_7					0x80
-#define PALMAS_INT4_MASK_GPIO_7_SHIFT				7
+#define PALMAS_INT4_MASK_GPIO_7_SHIFT				0x07
 #define PALMAS_INT4_MASK_GPIO_6					0x40
-#define PALMAS_INT4_MASK_GPIO_6_SHIFT				6
+#define PALMAS_INT4_MASK_GPIO_6_SHIFT				0x06
 #define PALMAS_INT4_MASK_GPIO_5					0x20
-#define PALMAS_INT4_MASK_GPIO_5_SHIFT				5
+#define PALMAS_INT4_MASK_GPIO_5_SHIFT				0x05
 #define PALMAS_INT4_MASK_GPIO_4					0x10
-#define PALMAS_INT4_MASK_GPIO_4_SHIFT				4
+#define PALMAS_INT4_MASK_GPIO_4_SHIFT				0x04
 #define PALMAS_INT4_MASK_GPIO_3					0x08
-#define PALMAS_INT4_MASK_GPIO_3_SHIFT				3
+#define PALMAS_INT4_MASK_GPIO_3_SHIFT				0x03
 #define PALMAS_INT4_MASK_GPIO_2					0x04
-#define PALMAS_INT4_MASK_GPIO_2_SHIFT				2
+#define PALMAS_INT4_MASK_GPIO_2_SHIFT				0x02
 #define PALMAS_INT4_MASK_GPIO_1					0x02
-#define PALMAS_INT4_MASK_GPIO_1_SHIFT				1
+#define PALMAS_INT4_MASK_GPIO_1_SHIFT				0x01
 #define PALMAS_INT4_MASK_GPIO_0					0x01
-#define PALMAS_INT4_MASK_GPIO_0_SHIFT				0
+#define PALMAS_INT4_MASK_GPIO_0_SHIFT				0x00
 
 /* Bit definitions for INT4_LINE_STATE */
 #define PALMAS_INT4_LINE_STATE_GPIO_7				0x80
-#define PALMAS_INT4_LINE_STATE_GPIO_7_SHIFT			7
+#define PALMAS_INT4_LINE_STATE_GPIO_7_SHIFT			0x07
 #define PALMAS_INT4_LINE_STATE_GPIO_6				0x40
-#define PALMAS_INT4_LINE_STATE_GPIO_6_SHIFT			6
+#define PALMAS_INT4_LINE_STATE_GPIO_6_SHIFT			0x06
 #define PALMAS_INT4_LINE_STATE_GPIO_5				0x20
-#define PALMAS_INT4_LINE_STATE_GPIO_5_SHIFT			5
+#define PALMAS_INT4_LINE_STATE_GPIO_5_SHIFT			0x05
 #define PALMAS_INT4_LINE_STATE_GPIO_4				0x10
-#define PALMAS_INT4_LINE_STATE_GPIO_4_SHIFT			4
+#define PALMAS_INT4_LINE_STATE_GPIO_4_SHIFT			0x04
 #define PALMAS_INT4_LINE_STATE_GPIO_3				0x08
-#define PALMAS_INT4_LINE_STATE_GPIO_3_SHIFT			3
+#define PALMAS_INT4_LINE_STATE_GPIO_3_SHIFT			0x03
 #define PALMAS_INT4_LINE_STATE_GPIO_2				0x04
-#define PALMAS_INT4_LINE_STATE_GPIO_2_SHIFT			2
+#define PALMAS_INT4_LINE_STATE_GPIO_2_SHIFT			0x02
 #define PALMAS_INT4_LINE_STATE_GPIO_1				0x02
-#define PALMAS_INT4_LINE_STATE_GPIO_1_SHIFT			1
+#define PALMAS_INT4_LINE_STATE_GPIO_1_SHIFT			0x01
 #define PALMAS_INT4_LINE_STATE_GPIO_0				0x01
-#define PALMAS_INT4_LINE_STATE_GPIO_0_SHIFT			0
+#define PALMAS_INT4_LINE_STATE_GPIO_0_SHIFT			0x00
 
 /* Bit definitions for INT4_EDGE_DETECT1 */
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING			0x80
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING_SHIFT		7
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING_SHIFT		0x07
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING			0x40
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING_SHIFT		6
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING_SHIFT		0x06
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING			0x20
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING_SHIFT		5
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING_SHIFT		0x05
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING			0x10
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING_SHIFT		4
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING_SHIFT		0x04
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING			0x08
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING_SHIFT		3
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING_SHIFT		0x03
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING			0x04
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING_SHIFT		2
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING_SHIFT		0x02
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING			0x02
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING_SHIFT		1
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING_SHIFT		0x01
 #define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING			0x01
-#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING_SHIFT		0
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING_SHIFT		0x00
 
 /* Bit definitions for INT4_EDGE_DETECT2 */
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING			0x80
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING_SHIFT		7
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING_SHIFT		0x07
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING			0x40
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING_SHIFT		6
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING_SHIFT		0x06
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING			0x20
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING_SHIFT		5
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING_SHIFT		0x05
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING			0x10
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING_SHIFT		4
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING_SHIFT		0x04
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING			0x08
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING_SHIFT		3
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING_SHIFT		0x03
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING			0x04
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING_SHIFT		2
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING_SHIFT		0x02
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING			0x02
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING_SHIFT		1
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING_SHIFT		0x01
 #define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING			0x01
-#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING_SHIFT		0
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING_SHIFT		0x00
 
 /* Bit definitions for INT_CTRL */
 #define PALMAS_INT_CTRL_INT_PENDING				0x04
-#define PALMAS_INT_CTRL_INT_PENDING_SHIFT			2
+#define PALMAS_INT_CTRL_INT_PENDING_SHIFT			0x02
 #define PALMAS_INT_CTRL_INT_CLEAR				0x01
-#define PALMAS_INT_CTRL_INT_CLEAR_SHIFT				0
+#define PALMAS_INT_CTRL_INT_CLEAR_SHIFT				0x00
 
 /* Registers for function USB_OTG */
-#define PALMAS_USB_WAKEUP					0x3
-#define PALMAS_USB_VBUS_CTRL_SET				0x4
-#define PALMAS_USB_VBUS_CTRL_CLR				0x5
-#define PALMAS_USB_ID_CTRL_SET					0x6
-#define PALMAS_USB_ID_CTRL_CLEAR				0x7
-#define PALMAS_USB_VBUS_INT_SRC					0x8
-#define PALMAS_USB_VBUS_INT_LATCH_SET				0x9
-#define PALMAS_USB_VBUS_INT_LATCH_CLR				0xA
-#define PALMAS_USB_VBUS_INT_EN_LO_SET				0xB
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR				0xC
-#define PALMAS_USB_VBUS_INT_EN_HI_SET				0xD
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR				0xE
-#define PALMAS_USB_ID_INT_SRC					0xF
+#define PALMAS_USB_WAKEUP					0x03
+#define PALMAS_USB_VBUS_CTRL_SET				0x04
+#define PALMAS_USB_VBUS_CTRL_CLR				0x05
+#define PALMAS_USB_ID_CTRL_SET					0x06
+#define PALMAS_USB_ID_CTRL_CLEAR				0x07
+#define PALMAS_USB_VBUS_INT_SRC					0x08
+#define PALMAS_USB_VBUS_INT_LATCH_SET				0x09
+#define PALMAS_USB_VBUS_INT_LATCH_CLR				0x0A
+#define PALMAS_USB_VBUS_INT_EN_LO_SET				0x0B
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR				0x0C
+#define PALMAS_USB_VBUS_INT_EN_HI_SET				0x0D
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR				0x0E
+#define PALMAS_USB_ID_INT_SRC					0x0F
 #define PALMAS_USB_ID_INT_LATCH_SET				0x10
 #define PALMAS_USB_ID_INT_LATCH_CLR				0x11
 #define PALMAS_USB_ID_INT_EN_LO_SET				0x12
@@ -2250,306 +2250,306 @@ enum usb_irq_events {
 
 /* Bit definitions for USB_WAKEUP */
 #define PALMAS_USB_WAKEUP_ID_WK_UP_COMP				0x01
-#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP_SHIFT			0
+#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP_SHIFT			0x00
 
 /* Bit definitions for USB_VBUS_CTRL_SET */
 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS			0x80
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS_SHIFT		7
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS_SHIFT		0x07
 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG			0x20
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG_SHIFT		5
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG_SHIFT		0x05
 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC			0x10
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC_SHIFT		4
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC_SHIFT		0x04
 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK			0x08
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK_SHIFT		3
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK_SHIFT		0x03
 #define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP			0x04
-#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP_SHIFT		2
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP_SHIFT		0x02
 
 /* Bit definitions for USB_VBUS_CTRL_CLR */
 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS			0x80
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS_SHIFT		7
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS_SHIFT		0x07
 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG			0x20
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG_SHIFT		5
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG_SHIFT		0x05
 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC			0x10
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC_SHIFT		4
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC_SHIFT		0x04
 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK			0x08
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK_SHIFT		3
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK_SHIFT		0x03
 #define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP			0x04
-#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP_SHIFT		2
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP_SHIFT		0x02
 
 /* Bit definitions for USB_ID_CTRL_SET */
 #define PALMAS_USB_ID_CTRL_SET_ID_PU_220K			0x80
-#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K_SHIFT			7
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K_SHIFT			0x07
 #define PALMAS_USB_ID_CTRL_SET_ID_PU_100K			0x40
-#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K_SHIFT			6
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K_SHIFT			0x06
 #define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV			0x20
-#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV_SHIFT			5
+#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV_SHIFT			0x05
 #define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U			0x10
-#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U_SHIFT			4
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U_SHIFT			0x04
 #define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U			0x08
-#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U_SHIFT			3
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U_SHIFT			0x03
 #define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP			0x04
-#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP_SHIFT		2
+#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP_SHIFT		0x02
 
 /* Bit definitions for USB_ID_CTRL_CLEAR */
 #define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K			0x80
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K_SHIFT		7
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K_SHIFT		0x07
 #define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K			0x40
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K_SHIFT		6
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K_SHIFT		0x06
 #define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV			0x20
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV_SHIFT		5
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV_SHIFT		0x05
 #define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U			0x10
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U_SHIFT		4
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U_SHIFT		0x04
 #define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U			0x08
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U_SHIFT		3
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U_SHIFT		0x03
 #define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP			0x04
-#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP_SHIFT		2
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP_SHIFT		0x02
 
 /* Bit definitions for USB_VBUS_INT_SRC */
 #define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD			0x80
-#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD_SHIFT		7
+#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD_SHIFT		0x07
 #define PALMAS_USB_VBUS_INT_SRC_VADP_PRB			0x40
-#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB_SHIFT			6
+#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB_SHIFT			0x06
 #define PALMAS_USB_VBUS_INT_SRC_VADP_SNS			0x20
-#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS_SHIFT			5
+#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS_SHIFT			0x05
 #define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD			0x08
-#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD_SHIFT		3
+#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD_SHIFT		0x03
 #define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD			0x04
-#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD_SHIFT		2
+#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD_SHIFT		0x02
 #define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD			0x02
-#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD_SHIFT		1
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD_SHIFT		0x01
 #define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END			0x01
-#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END_SHIFT		0
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END_SHIFT		0x00
 
 /* Bit definitions for USB_VBUS_INT_LATCH_SET */
 #define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD		0x80
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD_SHIFT	7
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD_SHIFT	0x07
 #define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB			0x40
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB_SHIFT		6
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB_SHIFT		0x06
 #define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS			0x20
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS_SHIFT		5
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS_SHIFT		0x05
 #define PALMAS_USB_VBUS_INT_LATCH_SET_ADP			0x10
-#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP_SHIFT			4
+#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP_SHIFT			0x04
 #define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD		0x08
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD_SHIFT		3
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD_SHIFT		0x03
 #define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD		0x04
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD_SHIFT		2
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD_SHIFT		0x02
 #define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD		0x02
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD_SHIFT		1
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD_SHIFT		0x01
 #define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END		0x01
-#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END_SHIFT		0
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END_SHIFT		0x00
 
 /* Bit definitions for USB_VBUS_INT_LATCH_CLR */
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD		0x80
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD_SHIFT	7
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD_SHIFT	0x07
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB			0x40
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB_SHIFT		6
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB_SHIFT		0x06
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS			0x20
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS_SHIFT		5
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS_SHIFT		0x05
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP			0x10
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP_SHIFT			4
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP_SHIFT			0x04
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD		0x08
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD_SHIFT		3
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD_SHIFT		0x03
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD		0x04
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD_SHIFT		2
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD_SHIFT		0x02
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD		0x02
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD_SHIFT		1
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD_SHIFT		0x01
 #define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END		0x01
-#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END_SHIFT		0
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END_SHIFT		0x00
 
 /* Bit definitions for USB_VBUS_INT_EN_LO_SET */
 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD		0x80
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD_SHIFT	7
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD_SHIFT	0x07
 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB			0x40
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB_SHIFT		6
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB_SHIFT		0x06
 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS			0x20
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS_SHIFT		5
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS_SHIFT		0x05
 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD		0x08
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD_SHIFT		3
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD_SHIFT		0x03
 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD		0x04
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD_SHIFT		2
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD_SHIFT		0x02
 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD		0x02
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD_SHIFT		1
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD_SHIFT		0x01
 #define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END		0x01
-#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END_SHIFT		0
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END_SHIFT		0x00
 
 /* Bit definitions for USB_VBUS_INT_EN_LO_CLR */
 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD		0x80
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD_SHIFT	7
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD_SHIFT	0x07
 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB			0x40
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB_SHIFT		6
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB_SHIFT		0x06
 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS			0x20
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS_SHIFT		5
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS_SHIFT		0x05
 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD		0x08
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD_SHIFT		3
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD_SHIFT		0x03
 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD		0x04
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD_SHIFT		2
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD_SHIFT		0x02
 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD		0x02
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD_SHIFT		1
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD_SHIFT		0x01
 #define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END		0x01
-#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END_SHIFT		0
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END_SHIFT		0x00
 
 /* Bit definitions for USB_VBUS_INT_EN_HI_SET */
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD		0x80
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD_SHIFT	7
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD_SHIFT	0x07
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB			0x40
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB_SHIFT		6
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB_SHIFT		0x06
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS			0x20
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS_SHIFT		5
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS_SHIFT		0x05
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP			0x10
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP_SHIFT			4
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP_SHIFT			0x04
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD		0x08
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD_SHIFT		3
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD_SHIFT		0x03
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD		0x04
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD_SHIFT		2
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD_SHIFT		0x02
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD		0x02
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD_SHIFT		1
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD_SHIFT		0x01
 #define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END		0x01
-#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END_SHIFT		0
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END_SHIFT		0x00
 
 /* Bit definitions for USB_VBUS_INT_EN_HI_CLR */
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD		0x80
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD_SHIFT	7
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD_SHIFT	0x07
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB			0x40
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB_SHIFT		6
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB_SHIFT		0x06
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS			0x20
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS_SHIFT		5
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS_SHIFT		0x05
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP			0x10
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP_SHIFT			4
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP_SHIFT			0x04
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD		0x08
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD_SHIFT		3
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD_SHIFT		0x03
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD		0x04
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD_SHIFT		2
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD_SHIFT		0x02
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD		0x02
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD_SHIFT		1
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD_SHIFT		0x01
 #define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END		0x01
-#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END_SHIFT		0
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END_SHIFT		0x00
 
 /* Bit definitions for USB_ID_INT_SRC */
 #define PALMAS_USB_ID_INT_SRC_ID_FLOAT				0x10
-#define PALMAS_USB_ID_INT_SRC_ID_FLOAT_SHIFT			4
+#define PALMAS_USB_ID_INT_SRC_ID_FLOAT_SHIFT			0x04
 #define PALMAS_USB_ID_INT_SRC_ID_A				0x08
-#define PALMAS_USB_ID_INT_SRC_ID_A_SHIFT			3
+#define PALMAS_USB_ID_INT_SRC_ID_A_SHIFT			0x03
 #define PALMAS_USB_ID_INT_SRC_ID_B				0x04
-#define PALMAS_USB_ID_INT_SRC_ID_B_SHIFT			2
+#define PALMAS_USB_ID_INT_SRC_ID_B_SHIFT			0x02
 #define PALMAS_USB_ID_INT_SRC_ID_C				0x02
-#define PALMAS_USB_ID_INT_SRC_ID_C_SHIFT			1
+#define PALMAS_USB_ID_INT_SRC_ID_C_SHIFT			0x01
 #define PALMAS_USB_ID_INT_SRC_ID_GND				0x01
-#define PALMAS_USB_ID_INT_SRC_ID_GND_SHIFT			0
+#define PALMAS_USB_ID_INT_SRC_ID_GND_SHIFT			0x00
 
 /* Bit definitions for USB_ID_INT_LATCH_SET */
 #define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT			0x10
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT_SHIFT		4
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT_SHIFT		0x04
 #define PALMAS_USB_ID_INT_LATCH_SET_ID_A			0x08
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_A_SHIFT			3
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_A_SHIFT			0x03
 #define PALMAS_USB_ID_INT_LATCH_SET_ID_B			0x04
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_B_SHIFT			2
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_B_SHIFT			0x02
 #define PALMAS_USB_ID_INT_LATCH_SET_ID_C			0x02
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_C_SHIFT			1
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_C_SHIFT			0x01
 #define PALMAS_USB_ID_INT_LATCH_SET_ID_GND			0x01
-#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND_SHIFT		0
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND_SHIFT		0x00
 
 /* Bit definitions for USB_ID_INT_LATCH_CLR */
 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT			0x10
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT_SHIFT		4
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT_SHIFT		0x04
 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_A			0x08
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A_SHIFT			3
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A_SHIFT			0x03
 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_B			0x04
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B_SHIFT			2
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B_SHIFT			0x02
 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_C			0x02
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C_SHIFT			1
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C_SHIFT			0x01
 #define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND			0x01
-#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND_SHIFT		0
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND_SHIFT		0x00
 
 /* Bit definitions for USB_ID_INT_EN_LO_SET */
 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT			0x10
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT_SHIFT		4
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT_SHIFT		0x04
 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_A			0x08
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A_SHIFT			3
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A_SHIFT			0x03
 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_B			0x04
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B_SHIFT			2
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B_SHIFT			0x02
 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_C			0x02
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C_SHIFT			1
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C_SHIFT			0x01
 #define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND			0x01
-#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND_SHIFT		0
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND_SHIFT		0x00
 
 /* Bit definitions for USB_ID_INT_EN_LO_CLR */
 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT			0x10
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT_SHIFT		4
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT_SHIFT		0x04
 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A			0x08
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A_SHIFT			3
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A_SHIFT			0x03
 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B			0x04
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B_SHIFT			2
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B_SHIFT			0x02
 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C			0x02
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C_SHIFT			1
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C_SHIFT			0x01
 #define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND			0x01
-#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND_SHIFT		0
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND_SHIFT		0x00
 
 /* Bit definitions for USB_ID_INT_EN_HI_SET */
 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT			0x10
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT_SHIFT		4
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT_SHIFT		0x04
 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_A			0x08
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A_SHIFT			3
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A_SHIFT			0x03
 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_B			0x04
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B_SHIFT			2
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B_SHIFT			0x02
 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_C			0x02
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C_SHIFT			1
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C_SHIFT			0x01
 #define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND			0x01
-#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND_SHIFT		0
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND_SHIFT		0x00
 
 /* Bit definitions for USB_ID_INT_EN_HI_CLR */
 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT			0x10
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT_SHIFT		4
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT_SHIFT		0x04
 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A			0x08
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A_SHIFT			3
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A_SHIFT			0x03
 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B			0x04
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B_SHIFT			2
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B_SHIFT			0x02
 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C			0x02
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C_SHIFT			1
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C_SHIFT			0x01
 #define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND			0x01
-#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND_SHIFT		0
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND_SHIFT		0x00
 
 /* Bit definitions for USB_OTG_ADP_CTRL */
 #define PALMAS_USB_OTG_ADP_CTRL_ADP_EN				0x04
-#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN_SHIFT			2
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN_SHIFT			0x02
 #define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_MASK			0x03
-#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_SHIFT			0
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_SHIFT			0x00
 
 /* Bit definitions for USB_OTG_ADP_HIGH */
-#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_MASK			0xff
-#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_SHIFT		0
+#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_MASK			0xFF
+#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_SHIFT		0x00
 
 /* Bit definitions for USB_OTG_ADP_LOW */
-#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_MASK			0xff
-#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_SHIFT			0
+#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_MASK			0xFF
+#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_SHIFT			0x00
 
 /* Bit definitions for USB_OTG_ADP_RISE */
-#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_MASK			0xff
-#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_SHIFT		0
+#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_MASK			0xFF
+#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_SHIFT		0x00
 
 /* Bit definitions for USB_OTG_REVISION */
 #define PALMAS_USB_OTG_REVISION_OTG_REV				0x01
-#define PALMAS_USB_OTG_REVISION_OTG_REV_SHIFT			0
+#define PALMAS_USB_OTG_REVISION_OTG_REV_SHIFT			0x00
 
 /* Registers for function VIBRATOR */
-#define PALMAS_VIBRA_CTRL					0x0
+#define PALMAS_VIBRA_CTRL					0x00
 
 /* Bit definitions for VIBRA_CTRL */
 #define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_MASK			0x06
-#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_SHIFT			1
+#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_SHIFT			0x01
 #define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL				0x01
-#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL_SHIFT			0
+#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL_SHIFT			0x00
 
 /* Registers for function GPIO */
-#define PALMAS_GPIO_DATA_IN					0x0
-#define PALMAS_GPIO_DATA_DIR					0x1
-#define PALMAS_GPIO_DATA_OUT					0x2
-#define PALMAS_GPIO_DEBOUNCE_EN					0x3
-#define PALMAS_GPIO_CLEAR_DATA_OUT				0x4
-#define PALMAS_GPIO_SET_DATA_OUT				0x5
-#define PALMAS_PU_PD_GPIO_CTRL1					0x6
-#define PALMAS_PU_PD_GPIO_CTRL2					0x7
-#define PALMAS_OD_OUTPUT_GPIO_CTRL				0x8
-#define PALMAS_GPIO_DATA_IN2					0x9
+#define PALMAS_GPIO_DATA_IN					0x00
+#define PALMAS_GPIO_DATA_DIR					0x01
+#define PALMAS_GPIO_DATA_OUT					0x02
+#define PALMAS_GPIO_DEBOUNCE_EN					0x03
+#define PALMAS_GPIO_CLEAR_DATA_OUT				0x04
+#define PALMAS_GPIO_SET_DATA_OUT				0x05
+#define PALMAS_PU_PD_GPIO_CTRL1					0x06
+#define PALMAS_PU_PD_GPIO_CTRL2					0x07
+#define PALMAS_OD_OUTPUT_GPIO_CTRL				0x08
+#define PALMAS_GPIO_DATA_IN2					0x09
 #define PALMAS_GPIO_DATA_DIR2					0x0A
 #define PALMAS_GPIO_DATA_OUT2					0x0B
 #define PALMAS_GPIO_DEBOUNCE_EN2				0x0C
@@ -2561,167 +2561,167 @@ enum usb_irq_events {
 
 /* Bit definitions for GPIO_DATA_IN */
 #define PALMAS_GPIO_DATA_IN_GPIO_7_IN				0x80
-#define PALMAS_GPIO_DATA_IN_GPIO_7_IN_SHIFT			7
+#define PALMAS_GPIO_DATA_IN_GPIO_7_IN_SHIFT			0x07
 #define PALMAS_GPIO_DATA_IN_GPIO_6_IN				0x40
-#define PALMAS_GPIO_DATA_IN_GPIO_6_IN_SHIFT			6
+#define PALMAS_GPIO_DATA_IN_GPIO_6_IN_SHIFT			0x06
 #define PALMAS_GPIO_DATA_IN_GPIO_5_IN				0x20
-#define PALMAS_GPIO_DATA_IN_GPIO_5_IN_SHIFT			5
+#define PALMAS_GPIO_DATA_IN_GPIO_5_IN_SHIFT			0x05
 #define PALMAS_GPIO_DATA_IN_GPIO_4_IN				0x10
-#define PALMAS_GPIO_DATA_IN_GPIO_4_IN_SHIFT			4
+#define PALMAS_GPIO_DATA_IN_GPIO_4_IN_SHIFT			0x04
 #define PALMAS_GPIO_DATA_IN_GPIO_3_IN				0x08
-#define PALMAS_GPIO_DATA_IN_GPIO_3_IN_SHIFT			3
+#define PALMAS_GPIO_DATA_IN_GPIO_3_IN_SHIFT			0x03
 #define PALMAS_GPIO_DATA_IN_GPIO_2_IN				0x04
-#define PALMAS_GPIO_DATA_IN_GPIO_2_IN_SHIFT			2
+#define PALMAS_GPIO_DATA_IN_GPIO_2_IN_SHIFT			0x02
 #define PALMAS_GPIO_DATA_IN_GPIO_1_IN				0x02
-#define PALMAS_GPIO_DATA_IN_GPIO_1_IN_SHIFT			1
+#define PALMAS_GPIO_DATA_IN_GPIO_1_IN_SHIFT			0x01
 #define PALMAS_GPIO_DATA_IN_GPIO_0_IN				0x01
-#define PALMAS_GPIO_DATA_IN_GPIO_0_IN_SHIFT			0
+#define PALMAS_GPIO_DATA_IN_GPIO_0_IN_SHIFT			0x00
 
 /* Bit definitions for GPIO_DATA_DIR */
 #define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR				0x80
-#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR_SHIFT			7
+#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR_SHIFT			0x07
 #define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR				0x40
-#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR_SHIFT			6
+#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR_SHIFT			0x06
 #define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR				0x20
-#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR_SHIFT			5
+#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR_SHIFT			0x05
 #define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR				0x10
-#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR_SHIFT			4
+#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR_SHIFT			0x04
 #define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR				0x08
-#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR_SHIFT			3
+#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR_SHIFT			0x03
 #define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR				0x04
-#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR_SHIFT			2
+#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR_SHIFT			0x02
 #define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR				0x02
-#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR_SHIFT			1
+#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR_SHIFT			0x01
 #define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR				0x01
-#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR_SHIFT			0
+#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR_SHIFT			0x00
 
 /* Bit definitions for GPIO_DATA_OUT */
 #define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT				0x80
-#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT_SHIFT			7
+#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT_SHIFT			0x07
 #define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT				0x40
-#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT_SHIFT			6
+#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT_SHIFT			0x06
 #define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT				0x20
-#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT_SHIFT			5
+#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT_SHIFT			0x05
 #define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT				0x10
-#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT_SHIFT			4
+#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT_SHIFT			0x04
 #define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT				0x08
-#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT_SHIFT			3
+#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT_SHIFT			0x03
 #define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT				0x04
-#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT_SHIFT			2
+#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT_SHIFT			0x02
 #define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT				0x02
-#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT_SHIFT			1
+#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT_SHIFT			0x01
 #define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT				0x01
-#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT_SHIFT			0
+#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT_SHIFT			0x00
 
 /* Bit definitions for GPIO_DEBOUNCE_EN */
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN		0x80
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN_SHIFT	7
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN_SHIFT	0x07
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN		0x40
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN_SHIFT	6
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN_SHIFT	0x06
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN		0x20
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN_SHIFT	5
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN_SHIFT	0x05
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN		0x10
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN_SHIFT	4
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN_SHIFT	0x04
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN		0x08
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN_SHIFT	3
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN_SHIFT	0x03
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN		0x04
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN_SHIFT	2
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN_SHIFT	0x02
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN		0x02
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN_SHIFT	1
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN_SHIFT	0x01
 #define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN		0x01
-#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN_SHIFT	0
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN_SHIFT	0x00
 
 /* Bit definitions for GPIO_CLEAR_DATA_OUT */
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT	0x80
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT_SHIFT	7
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT_SHIFT	0x07
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT	0x40
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT_SHIFT	6
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT_SHIFT	0x06
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT	0x20
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT_SHIFT	5
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT_SHIFT	0x05
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT	0x10
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT_SHIFT	4
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT_SHIFT	0x04
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT	0x08
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT_SHIFT	3
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT_SHIFT	0x03
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT	0x04
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT_SHIFT	2
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT_SHIFT	0x02
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT	0x02
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT_SHIFT	1
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT_SHIFT	0x01
 #define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT	0x01
-#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT_SHIFT	0
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT_SHIFT	0x00
 
 /* Bit definitions for GPIO_SET_DATA_OUT */
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT		0x80
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT_SHIFT	7
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT_SHIFT	0x07
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT		0x40
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT_SHIFT	6
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT_SHIFT	0x06
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT		0x20
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT_SHIFT	5
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT_SHIFT	0x05
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT		0x10
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT_SHIFT	4
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT_SHIFT	0x04
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT		0x08
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT_SHIFT	3
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT_SHIFT	0x03
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT		0x04
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT_SHIFT	2
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT_SHIFT	0x02
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT		0x02
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT_SHIFT	1
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT_SHIFT	0x01
 #define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT		0x01
-#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT_SHIFT	0
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT_SHIFT	0x00
 
 /* Bit definitions for PU_PD_GPIO_CTRL1 */
 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD			0x40
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD_SHIFT			6
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD_SHIFT			0x06
 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU			0x20
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU_SHIFT			5
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU_SHIFT			0x05
 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD			0x10
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD_SHIFT			4
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD_SHIFT			0x04
 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU			0x08
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU_SHIFT			3
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU_SHIFT			0x03
 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD			0x04
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD_SHIFT			2
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD_SHIFT			0x02
 #define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD			0x01
-#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD_SHIFT			0
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD_SHIFT			0x00
 
 /* Bit definitions for PU_PD_GPIO_CTRL2 */
 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD			0x40
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD_SHIFT			6
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD_SHIFT			0x06
 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU			0x20
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU_SHIFT			5
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU_SHIFT			0x05
 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD			0x10
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD_SHIFT			4
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD_SHIFT			0x04
 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU			0x08
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU_SHIFT			3
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU_SHIFT			0x03
 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD			0x04
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD_SHIFT			2
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD_SHIFT			0x02
 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU			0x02
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU_SHIFT			1
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU_SHIFT			0x01
 #define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD			0x01
-#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD_SHIFT			0
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD_SHIFT			0x00
 
 /* Bit definitions for OD_OUTPUT_GPIO_CTRL */
 #define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD			0x20
-#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD_SHIFT		5
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD_SHIFT		0x05
 #define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD			0x04
-#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD_SHIFT		2
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD_SHIFT		0x02
 #define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD			0x02
-#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD_SHIFT		1
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD_SHIFT		0x01
 
 /* Registers for function GPADC */
-#define PALMAS_GPADC_CTRL1					0x0
-#define PALMAS_GPADC_CTRL2					0x1
-#define PALMAS_GPADC_RT_CTRL					0x2
-#define PALMAS_GPADC_AUTO_CTRL					0x3
-#define PALMAS_GPADC_STATUS					0x4
-#define PALMAS_GPADC_RT_SELECT					0x5
-#define PALMAS_GPADC_RT_CONV0_LSB				0x6
-#define PALMAS_GPADC_RT_CONV0_MSB				0x7
-#define PALMAS_GPADC_AUTO_SELECT				0x8
-#define PALMAS_GPADC_AUTO_CONV0_LSB				0x9
-#define PALMAS_GPADC_AUTO_CONV0_MSB				0xA
-#define PALMAS_GPADC_AUTO_CONV1_LSB				0xB
-#define PALMAS_GPADC_AUTO_CONV1_MSB				0xC
-#define PALMAS_GPADC_SW_SELECT					0xD
-#define PALMAS_GPADC_SW_CONV0_LSB				0xE
-#define PALMAS_GPADC_SW_CONV0_MSB				0xF
+#define PALMAS_GPADC_CTRL1					0x00
+#define PALMAS_GPADC_CTRL2					0x01
+#define PALMAS_GPADC_RT_CTRL					0x02
+#define PALMAS_GPADC_AUTO_CTRL					0x03
+#define PALMAS_GPADC_STATUS					0x04
+#define PALMAS_GPADC_RT_SELECT					0x05
+#define PALMAS_GPADC_RT_CONV0_LSB				0x06
+#define PALMAS_GPADC_RT_CONV0_MSB				0x07
+#define PALMAS_GPADC_AUTO_SELECT				0x08
+#define PALMAS_GPADC_AUTO_CONV0_LSB				0x09
+#define PALMAS_GPADC_AUTO_CONV0_MSB				0x0A
+#define PALMAS_GPADC_AUTO_CONV1_LSB				0x0B
+#define PALMAS_GPADC_AUTO_CONV1_MSB				0x0C
+#define PALMAS_GPADC_SW_SELECT					0x0D
+#define PALMAS_GPADC_SW_CONV0_LSB				0x0E
+#define PALMAS_GPADC_SW_CONV0_MSB				0x0F
 #define PALMAS_GPADC_THRES_CONV0_LSB				0x10
 #define PALMAS_GPADC_THRES_CONV0_MSB				0x11
 #define PALMAS_GPADC_THRES_CONV1_LSB				0x12
@@ -2731,150 +2731,150 @@ enum usb_irq_events {
 
 /* Bit definitions for GPADC_CTRL1 */
 #define PALMAS_GPADC_CTRL1_RESERVED_MASK			0xc0
-#define PALMAS_GPADC_CTRL1_RESERVED_SHIFT			6
+#define PALMAS_GPADC_CTRL1_RESERVED_SHIFT			0x06
 #define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK			0x30
-#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT		4
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT		0x04
 #define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK			0x0c
-#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT		2
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT		0x02
 #define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET			0x02
-#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET_SHIFT		1
+#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET_SHIFT		0x01
 #define PALMAS_GPADC_CTRL1_GPADC_FORCE				0x01
-#define PALMAS_GPADC_CTRL1_GPADC_FORCE_SHIFT			0
+#define PALMAS_GPADC_CTRL1_GPADC_FORCE_SHIFT			0x00
 
 /* Bit definitions for GPADC_CTRL2 */
 #define PALMAS_GPADC_CTRL2_RESERVED_MASK			0x06
-#define PALMAS_GPADC_CTRL2_RESERVED_SHIFT			1
+#define PALMAS_GPADC_CTRL2_RESERVED_SHIFT			0x01
 
 /* Bit definitions for GPADC_RT_CTRL */
 #define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY			0x02
-#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT			1
+#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT			0x01
 #define PALMAS_GPADC_RT_CTRL_START_POLARITY			0x01
-#define PALMAS_GPADC_RT_CTRL_START_POLARITY_SHIFT		0
+#define PALMAS_GPADC_RT_CTRL_START_POLARITY_SHIFT		0x00
 
 /* Bit definitions for GPADC_AUTO_CTRL */
 #define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1			0x80
-#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1_SHIFT		7
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1_SHIFT		0x07
 #define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0			0x40
-#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0_SHIFT		6
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0_SHIFT		0x06
 #define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN			0x20
-#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN_SHIFT		5
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN_SHIFT		0x05
 #define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN			0x10
-#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN_SHIFT		4
-#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK		0x0f
-#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_SHIFT		0
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN_SHIFT		0x04
+#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK		0x0F
+#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_SHIFT		0x00
 
 /* Bit definitions for GPADC_STATUS */
 #define PALMAS_GPADC_STATUS_GPADC_AVAILABLE			0x10
-#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE_SHIFT		4
+#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE_SHIFT		0x04
 
 /* Bit definitions for GPADC_RT_SELECT */
 #define PALMAS_GPADC_RT_SELECT_RT_CONV_EN			0x80
-#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN_SHIFT			7
-#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_MASK		0x0f
-#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_SHIFT		0
+#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN_SHIFT			0x07
+#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_MASK		0x0F
+#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_SHIFT		0x00
 
 /* Bit definitions for GPADC_RT_CONV0_LSB */
-#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_MASK		0xff
-#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_SHIFT		0
+#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_MASK		0xFF
+#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_SHIFT		0x00
 
 /* Bit definitions for GPADC_RT_CONV0_MSB */
-#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_MASK		0x0f
-#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_SHIFT		0
+#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_MASK		0x0F
+#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_SHIFT		0x00
 
 /* Bit definitions for GPADC_AUTO_SELECT */
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_MASK		0xf0
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_SHIFT		4
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_MASK		0x0f
-#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_SHIFT		0
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_MASK		0xF0
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_SHIFT		0x04
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_MASK		0x0F
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_SHIFT		0x00
 
 /* Bit definitions for GPADC_AUTO_CONV0_LSB */
-#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_MASK		0xff
-#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_SHIFT	0
+#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_MASK		0xFF
+#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_AUTO_CONV0_MSB */
-#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_MASK		0x0f
-#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_SHIFT	0
+#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_MASK		0x0F
+#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_AUTO_CONV1_LSB */
-#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_MASK		0xff
-#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_SHIFT	0
+#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_MASK		0xFF
+#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_AUTO_CONV1_MSB */
-#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_MASK		0x0f
-#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_SHIFT	0
+#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_MASK		0x0F
+#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_SW_SELECT */
 #define PALMAS_GPADC_SW_SELECT_SW_CONV_EN			0x80
-#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN_SHIFT			7
+#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN_SHIFT			0x07
 #define PALMAS_GPADC_SW_SELECT_SW_START_CONV0			0x10
-#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0_SHIFT		4
-#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK		0x0f
-#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_SHIFT		0
+#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0_SHIFT		0x04
+#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK		0x0F
+#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_SHIFT		0x00
 
 /* Bit definitions for GPADC_SW_CONV0_LSB */
-#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_MASK		0xff
-#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_SHIFT		0
+#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_MASK		0xFF
+#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_SHIFT		0x00
 
 /* Bit definitions for GPADC_SW_CONV0_MSB */
-#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_MASK		0x0f
-#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_SHIFT		0
+#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_MASK		0x0F
+#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_SHIFT		0x00
 
 /* Bit definitions for GPADC_THRES_CONV0_LSB */
-#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_MASK	0xff
-#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_SHIFT	0
+#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_MASK	0xFF
+#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_THRES_CONV0_MSB */
 #define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL		0x80
-#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL_SHIFT	7
-#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_MASK	0x0f
-#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_SHIFT	0
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL_SHIFT	0x07
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_MASK	0x0F
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_THRES_CONV1_LSB */
-#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_MASK	0xff
-#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_SHIFT	0
+#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_MASK	0xFF
+#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_THRES_CONV1_MSB */
 #define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL		0x80
-#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL_SHIFT	7
-#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_MASK	0x0f
-#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_SHIFT	0
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL_SHIFT	0x07
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_MASK	0x0F
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_SHIFT	0x00
 
 /* Bit definitions for GPADC_SMPS_ILMONITOR_EN */
 #define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN		0x20
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN_SHIFT	5
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN_SHIFT	0x05
 #define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT		0x10
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT_SHIFT	4
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_MASK	0x0f
-#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_SHIFT	0
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT_SHIFT	0x04
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_MASK	0x0F
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_SHIFT	0x00
 
 /* Bit definitions for GPADC_SMPS_VSEL_MONITORING */
 #define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE		0x80
-#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE_SHIFT	7
-#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_MASK	0x7f
-#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_SHIFT	0
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE_SHIFT	0x07
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_MASK	0x7F
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_SHIFT	0x00
 
 /* Registers for function GPADC */
-#define PALMAS_GPADC_TRIM1					0x0
-#define PALMAS_GPADC_TRIM2					0x1
-#define PALMAS_GPADC_TRIM3					0x2
-#define PALMAS_GPADC_TRIM4					0x3
-#define PALMAS_GPADC_TRIM5					0x4
-#define PALMAS_GPADC_TRIM6					0x5
-#define PALMAS_GPADC_TRIM7					0x6
-#define PALMAS_GPADC_TRIM8					0x7
-#define PALMAS_GPADC_TRIM9					0x8
-#define PALMAS_GPADC_TRIM10					0x9
-#define PALMAS_GPADC_TRIM11					0xA
-#define PALMAS_GPADC_TRIM12					0xB
-#define PALMAS_GPADC_TRIM13					0xC
-#define PALMAS_GPADC_TRIM14					0xD
-#define PALMAS_GPADC_TRIM15					0xE
-#define PALMAS_GPADC_TRIM16					0xF
+#define PALMAS_GPADC_TRIM1					0x00
+#define PALMAS_GPADC_TRIM2					0x01
+#define PALMAS_GPADC_TRIM3					0x02
+#define PALMAS_GPADC_TRIM4					0x03
+#define PALMAS_GPADC_TRIM5					0x04
+#define PALMAS_GPADC_TRIM6					0x05
+#define PALMAS_GPADC_TRIM7					0x06
+#define PALMAS_GPADC_TRIM8					0x07
+#define PALMAS_GPADC_TRIM9					0x08
+#define PALMAS_GPADC_TRIM10					0x09
+#define PALMAS_GPADC_TRIM11					0x0A
+#define PALMAS_GPADC_TRIM12					0x0B
+#define PALMAS_GPADC_TRIM13					0x0C
+#define PALMAS_GPADC_TRIM14					0x0D
+#define PALMAS_GPADC_TRIM15					0x0E
+#define PALMAS_GPADC_TRIM16					0x0F
 
 static inline int palmas_read(struct palmas *palmas, unsigned int base,
 		unsigned int reg, unsigned int *val)
 {
-	unsigned int addr =  PALMAS_BASE_TO_REG(base, reg);
+	unsigned int addr = PALMAS_BASE_TO_REG(base, reg);
 	int slave_id = PALMAS_BASE_TO_SLAVE(base);
 
 	return regmap_read(palmas->regmap[slave_id], addr, val);
diff --git a/include/linux/mfd/pm8xxx/core.h b/include/linux/mfd/pm8xxx/core.h
deleted file mode 100644
index bd2f4f64e93..00000000000
--- a/include/linux/mfd/pm8xxx/core.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/*
- * Qualcomm PMIC 8xxx driver header file
- *
- */
-
-#ifndef __MFD_PM8XXX_CORE_H
-#define __MFD_PM8XXX_CORE_H
-
-#include <linux/mfd/core.h>
-
-struct pm8xxx_drvdata {
-	int	(*pmic_readb) (const struct device *dev, u16 addr, u8 *val);
-	int	(*pmic_writeb) (const struct device *dev, u16 addr, u8 val);
-	int	(*pmic_read_buf) (const struct device *dev, u16 addr, u8 *buf,
-									int n);
-	int	(*pmic_write_buf) (const struct device *dev, u16 addr, u8 *buf,
-									int n);
-	int	(*pmic_read_irq_stat) (const struct device *dev, int irq);
-	void	*pm_chip_data;
-};
-
-static inline int pm8xxx_readb(const struct device *dev, u16 addr, u8 *val)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_readb(dev, addr, val);
-}
-
-static inline int pm8xxx_writeb(const struct device *dev, u16 addr, u8 val)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_writeb(dev, addr, val);
-}
-
-static inline int pm8xxx_read_buf(const struct device *dev, u16 addr, u8 *buf,
-									int n)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_read_buf(dev, addr, buf, n);
-}
-
-static inline int pm8xxx_write_buf(const struct device *dev, u16 addr, u8 *buf,
-									int n)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_write_buf(dev, addr, buf, n);
-}
-
-static inline int pm8xxx_read_irq_stat(const struct device *dev, int irq)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_read_irq_stat(dev, irq);
-}
-
-#endif
diff --git a/include/linux/mfd/rdc321x.h b/include/linux/mfd/rdc321x.h
index 4bdf19c8eed..442743a8f91 100644
--- a/include/linux/mfd/rdc321x.h
+++ b/include/linux/mfd/rdc321x.h
@@ -12,7 +12,7 @@
 #define RDC321X_GPIO_CTRL_REG2	0x84
 #define RDC321X_GPIO_DATA_REG2	0x88
 
-#define RDC321X_MAX_GPIO	58
+#define RDC321X_NUM_GPIO	59
 
 struct rdc321x_gpio_pdata {
 	struct pci_dev *sb_pdev;
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 157e32b6ca2..47d84242940 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -24,35 +24,36 @@ enum sec_device_type {
 };
 
 /**
- * struct sec_pmic_dev - s5m87xx master device for sub-drivers
- * @dev: master device of the chip (can be used to access platform data)
- * @pdata: pointer to private data used to pass platform data to child
- * @i2c: i2c client private data for regulator
- * @rtc: i2c client private data for rtc
- * @iolock: mutex for serializing io access
- * @irqlock: mutex for buslock
- * @irq_base: base IRQ number for sec-pmic, required for IRQs
- * @irq: generic IRQ number for s5m87xx
- * @ono: power onoff IRQ number for s5m87xx
- * @irq_masks_cur: currently active value
- * @irq_masks_cache: cached hardware value
- * @type: indicate which s5m87xx "variant" is used
+ * struct sec_pmic_dev - s2m/s5m master device for sub-drivers
+ * @dev:		Master device of the chip
+ * @pdata:		Platform data populated with data from DTS
+ *			or board files
+ * @regmap_pmic:	Regmap associated with PMIC's I2C address
+ * @i2c:		I2C client of the main driver
+ * @device_type:	Type of device, matches enum sec_device_type
+ * @irq_base:		Base IRQ number for device, required for IRQs
+ * @irq:		Generic IRQ number for device
+ * @irq_data:		Runtime data structure for IRQ controller
+ * @ono:		Power onoff IRQ number for s5m87xx
+ * @wakeup:		Whether or not this is a wakeup device
+ * @wtsr_smpl:		Whether or not to enable in RTC driver the Watchdog
+ *			Timer Software Reset (registers set to default value
+ *			after PWRHOLD falling) and Sudden Momentary Power Loss
+ *			(PMIC will enter power on sequence after short drop in
+ *			VBATT voltage).
  */
 struct sec_pmic_dev {
 	struct device *dev;
 	struct sec_platform_data *pdata;
 	struct regmap *regmap_pmic;
-	struct regmap *regmap_rtc;
 	struct i2c_client *i2c;
-	struct i2c_client *rtc;
 
-	int device_type;
+	unsigned long device_type;
 	int irq_base;
 	int irq;
 	struct regmap_irq_chip_data *irq_data;
 
 	int ono;
-	unsigned long type;
 	bool wakeup;
 	bool wtsr_smpl;
 };
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 48395a69a7e..575a86c7fcb 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -11,6 +11,7 @@
 #include <linux/mutex.h>
 
 struct device;
+struct regulator;
 
 enum stmpe_block {
 	STMPE_BLOCK_GPIO	= 1 << 0,
@@ -62,6 +63,8 @@ struct stmpe_client_info;
 
 /**
  * struct stmpe - STMPE MFD structure
+ * @vcc: optional VCC regulator
+ * @vio: optional VIO regulator
  * @lock: lock protecting I/O operations
  * @irq_lock: IRQ bus lock
  * @dev: device, mostly for dev_dbg()
@@ -73,13 +76,14 @@ struct stmpe_client_info;
  * @regs: list of addresses of registers which are at different addresses on
  *	  different variants.  Indexed by one of STMPE_IDX_*.
  * @irq: irq number for stmpe
- * @irq_base: starting IRQ number for internal IRQs
  * @num_gpios: number of gpios, differs for variants
  * @ier: cache of IER registers for bus_lock
  * @oldier: cache of IER registers for bus_lock
  * @pdata: platform data
  */
 struct stmpe {
+	struct regulator *vcc;
+	struct regulator *vio;
 	struct mutex lock;
 	struct mutex irq_lock;
 	struct device *dev;
@@ -91,7 +95,6 @@ struct stmpe {
 	const u8 *regs;
 
 	int irq;
-	int irq_base;
 	int num_gpios;
 	u8 ier[2];
 	u8 oldier[2];
@@ -132,8 +135,6 @@ struct stmpe_keypad_platform_data {
 
 /**
  * struct stmpe_gpio_platform_data - STMPE GPIO platform data
- * @gpio_base: first gpio number assigned.  A maximum of
- *	       %STMPE_NR_GPIOS GPIOs will be allocated.
  * @norequest_mask: bitmask specifying which GPIOs should _not_ be
  *		    requestable due to different usage (e.g. touch, keypad)
  *		    STMPE_GPIO_NOREQ_* macros can be used here.
@@ -141,7 +142,6 @@ struct stmpe_keypad_platform_data {
  * @remove: board specific remove callback
  */
 struct stmpe_gpio_platform_data {
-	int gpio_base;
 	unsigned norequest_mask;
 	void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
 	void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
@@ -195,8 +195,6 @@ struct stmpe_ts_platform_data {
  * @irq_trigger: IRQ trigger to use for the interrupt to the host
  * @autosleep: bool to enable/disable stmpe autosleep
  * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
- * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
- *	      %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
  * @irq_over_gpio: true if gpio is used to get irq
  * @irq_gpio: gpio number over which irq will be requested (significant only if
  *	      irq_over_gpio is true)
@@ -207,7 +205,6 @@ struct stmpe_ts_platform_data {
 struct stmpe_platform_data {
 	int id;
 	unsigned int blocks;
-	int irq_base;
 	unsigned int irq_trigger;
 	bool autosleep;
 	bool irq_over_gpio;
@@ -219,10 +216,4 @@ struct stmpe_platform_data {
 	struct stmpe_ts_platform_data *ts;
 };
 
-#define STMPE_NR_INTERNAL_IRQS	9
-#define STMPE_INT_GPIO(x)	(STMPE_NR_INTERNAL_IRQS + (x))
-
-#define STMPE_NR_GPIOS		24
-#define STMPE_NR_IRQS		STMPE_INT_GPIO(STMPE_NR_GPIOS)
-
 #endif
diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
index 8789fa3c7fd..75e543b78f5 100644
--- a/include/linux/mfd/syscon.h
+++ b/include/linux/mfd/syscon.h
@@ -15,6 +15,8 @@
 #ifndef __LINUX_MFD_SYSCON_H__
 #define __LINUX_MFD_SYSCON_H__
 
+#include <linux/err.h>
+
 struct device_node;
 
 #ifdef CONFIG_MFD_SYSCON
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index d2e357df5a0..2f9b593246e 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -267,7 +267,6 @@ struct tps65218 {
 	u32 irq_mask;
 	struct regmap_irq_chip_data *irq_data;
 	struct regulator_desc desc[TPS65218_NUM_REGULATOR];
-	struct regulator_dev *rdev[TPS65218_NUM_REGULATOR];
 	struct tps_info *info[TPS65218_NUM_REGULATOR];
 	struct regmap *regmap;
 };
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index 81f639bc1ae..8f9fc3d26e6 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
 #include <linux/regulator/consumer.h>
+#include <linux/clk.h>
 
 #define TWL6040_REG_ASICID		0x01
 #define TWL6040_REG_ASICREV		0x02
@@ -157,6 +158,7 @@
 #define TWL6040_I2CSEL			0x01
 #define TWL6040_RESETSPLIT		0x04
 #define TWL6040_INTCLRMODE		0x08
+#define TWL6040_I2CMODE(x)		((x & 0x3) << 4)
 
 /* STATUS (0x2E) fields */
 
@@ -222,6 +224,7 @@ struct twl6040 {
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *irq_data;
 	struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */
+	struct clk *clk32k;
 	struct mutex mutex;
 	struct mutex irq_mutex;
 	struct mfd_cell cells[TWL6040_CELLS];
author	Linus Torvalds <torvalds@linux-foundation.org>	2014-06-06 12:08:39 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2014-06-06 12:08:39 -0700
commit	1fe9eb184721132c7254d76d9ef31c96edad8870 (patch)
tree	c055ffb7f201bc2370714ebe186a922d0eb39d0d
parent	0bb464624140bfdd8389d4c5464ba134b2856049 (diff)
parent	89abd4df28c6f85645e32f37ffab6426f800e4a1 (diff)