Merge tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Kevin Hilman:
 "These are changes that arrived a little late but were considered
  self-contained enough to still go in for v3.14.

  They are all device tree updtes this time around, and mainly for
  Broadcom SoCs"

* tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: moxart: move fixed rate clock child node to board level dts
  clk: bcm281xx: define kona clock binding
  ARM: dts: add usb udc support to bcm281xx
  ARM: dts: Specify clocks for timer on bcm11351
  Documentation: dt: kona-timer: Add clocks property
  ARM: dts: Specify clocks for SDHCIs on bcm11351
  Documentation: dt: kona-sdhci: Add clocks property
  ARM: dts: Specify clocks for UARTs on bcm11351
  ARM: dts: bcm281xx: Add i2c busses
  ARM: dts: Declare clocks as fixed on bcm11351
  ARM: dts: bcm28155-ap: Enable all the i2c busses

8 files changed, 310 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
index 17d88b233d1..39adf54b438 100644
--- a/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/kona-timer.txt
@@ -8,13 +8,18 @@ Required properties:
 - DEPRECATED: compatible : "bcm,kona-timer"
 - reg : Register range for the timer
 - interrupts : interrupt for the timer
+- clocks: phandle + clock specifier pair of the external clock
 - clock-frequency: frequency that the clock operates
 
+Only one of clocks or clock-frequency should be specified.
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
 Example:
 	timer@35006000 {
 		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <0x0 7 0x4>;
-		clock-frequency = <32768>;
+		clocks = <&hub_timer_clk>;
 	};
 
diff --git a/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
new file mode 100644
index 00000000000..56d1f496107
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
@@ -0,0 +1,93 @@
+Broadcom Kona Family Clocks
+
+This binding is associated with Broadcom SoCs having "Kona" style
+clock control units (CCUs).  A CCU is a clock provider that manages
+a set of clock signals.  Each CCU is represented by a node in the
+device tree.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible
+	Shall have one of the following values:
+	- "brcm,bcm11351-root-ccu"
+	- "brcm,bcm11351-aon-ccu"
+	- "brcm,bcm11351-hub-ccu"
+	- "brcm,bcm11351-master-ccu"
+	- "brcm,bcm11351-slave-ccu"
+- reg
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells
+	Shall have value <1>.  The permitted clock-specifier values
+	are defined below.
+- clock-output-names
+	Shall be an ordered list of strings defining the names of
+	the clocks provided by the CCU.
+
+
+BCM281XX family SoCs use Kona CCUs.  The following table defines
+the set of CCUs and clock specifiers for BCM281XX clocks.  When
+a clock consumer references a clocks, its symbolic specifier
+(rather than its numeric index value) should be used.  These
+specifiers are defined in "include/dt-bindings/clock/bcm281xx.h".
+
+    CCU     Clock           Type    Index   Specifier
+    ---     -----           ----    -----   ---------
+    root    frac_1m         peri      0     BCM281XX_ROOT_CCU_FRAC_1M
+
+    aon     hub_timer       peri      0     BCM281XX_AON_CCU_HUB_TIMER
+    aon     pmu_bsc         peri      1     BCM281XX_AON_CCU_PMU_BSC
+    aon     pmu_bsc_var     peri      2     BCM281XX_AON_CCU_PMU_BSC_VAR
+
+    hub     tmon_1m         peri      0     BCM281XX_HUB_CCU_TMON_1M
+
+    master  sdio1           peri      0     BCM281XX_MASTER_CCU_SDIO1
+    master  sdio2           peri      1     BCM281XX_MASTER_CCU_SDIO2
+    master  sdio3           peri      2     BCM281XX_MASTER_CCU_SDIO3
+    master  sdio4           peri      3     BCM281XX_MASTER_CCU_SDIO4
+    master  dmac            peri      4     BCM281XX_MASTER_CCU_DMAC
+    master  usb_ic          peri      5     BCM281XX_MASTER_CCU_USB_IC
+    master  hsic2_48m       peri      6     BCM281XX_MASTER_CCU_HSIC_48M
+    master  hsic2_12m       peri      7     BCM281XX_MASTER_CCU_HSIC_12M
+
+    slave   uartb           peri      0     BCM281XX_SLAVE_CCU_UARTB
+    slave   uartb2          peri      1     BCM281XX_SLAVE_CCU_UARTB2
+    slave   uartb3          peri      2     BCM281XX_SLAVE_CCU_UARTB3
+    slave   uartb4          peri      3     BCM281XX_SLAVE_CCU_UARTB4
+    slave   ssp0            peri      4     BCM281XX_SLAVE_CCU_SSP0
+    slave   ssp2            peri      5     BCM281XX_SLAVE_CCU_SSP2
+    slave   bsc1            peri      6     BCM281XX_SLAVE_CCU_BSC1
+    slave   bsc2            peri      7     BCM281XX_SLAVE_CCU_BSC2
+    slave   bsc3            peri      8     BCM281XX_SLAVE_CCU_BSC3
+    slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
+
+
+Device tree example:
+
+	slave_ccu: slave_ccu {
+		compatible = "brcm,bcm11351-slave-ccu";
+		reg = <0x3e011000 0x0f00>;
+		#clock-cells = <1>;
+		clock-output-names = "uartb",
+				     "uartb2",
+				     "uartb3",
+				     "uartb4";
+	};
+
+	ref_crystal_clk: ref_crystal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt
index 789fb07a426..aaba2483b4f 100644
--- a/Documentation/devicetree/bindings/mmc/kona-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/kona-sdhci.txt
@@ -6,12 +6,16 @@ and the properties present in the bcm281xx SDHCI
 Required properties:
 - compatible : Should be "brcm,kona-sdhci"
 - DEPRECATED: compatible : Should be "bcm,kona-sdhci"
+- clocks: phandle + clock specifier pair of the external clock
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
 
 Example:
 
 sdio2: sdio@0x3f1a0000 {
 	compatible = "brcm,kona-sdhci";
 	reg = <0x3f1a0000 0x10000>;
+	clocks = <&sdio3_clk>;
 	interrupts = <0x0 74 0x4>;
 };
 
diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 23cd16d736b..396b70459cd 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -44,5 +44,11 @@
 		status = "okay";
 	};
 
+	usbotg: usb@3f120000 {
+		status = "okay";
+	};
 
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index dd8e878741c..e491b82f8d6 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -43,7 +43,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
-		clock-frequency = <13000000>;
+		clocks = <&uartb_clk>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -53,7 +53,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x1000>;
-		clock-frequency = <13000000>;
+		clocks = <&uartb2_clk>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -63,7 +63,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x1000>;
-		clock-frequency = <13000000>;
+		clocks = <&uartb3_clk>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -73,7 +73,7 @@
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e003000 0x1000>;
-		clock-frequency = <13000000>;
+		clocks = <&uartb4_clk>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
@@ -95,7 +95,7 @@
 		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <32768>;
+		clocks = <&hub_timer_clk>;
 	};
 
 	gpio: gpio@35003000 {
@@ -118,6 +118,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio1_clk>;
 		status = "disabled";
 	};
 
@@ -125,6 +126,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio2_clk>;
 		status = "disabled";
 	};
 
@@ -132,6 +134,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio3_clk>;
 		status = "disabled";
 	};
 
@@ -139,6 +142,7 @@
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sdio4_clk>;
 		status = "disabled";
 	};
 
@@ -146,4 +150,160 @@
 		compatible = "brcm,capri-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc1_clk>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc2_clk>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc3_clk>;
+		status = "disabled";
+	};
+
+	i2c@3500d000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3500d000 0x80>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmu_bsc_clk>;
+		status = "disabled";
+	};
+
+	clocks {
+		bsc1_clk: bsc1 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		bsc2_clk: bsc2 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		bsc3_clk: bsc3 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		pmu_bsc_clk: pmu_bsc {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		hub_timer_clk: hub_timer {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+
+		pwm_clk: pwm {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio1_clk: sdio1 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio2_clk: sdio2 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio3_clk: sdio3 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		sdio4_clk: sdio4 {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		tmon_1m_clk: tmon_1m {
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
+			#clock-cells = <0>;
+		};
+
+		uartb_clk: uartb {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		uartb2_clk: uartb2 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		uartb3_clk: uartb3 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		uartb4_clk: uartb4 {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 08e47c28522..c7fa9fbb999 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -27,6 +27,26 @@
 		status = "okay";
 	};
 
+	i2c@3e016000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3e017000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3e018000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3500d000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
 	sdio1: sdio@3f180000 {
 		max-frequency = <48000000>;
 		status = "okay";
@@ -43,4 +63,12 @@
 		cd-gpios = <&gpio 14 0>;
 		status = "okay";
 	};
+
+	usbotg: usb@3f120000 {
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index 90749d55de0..10d088df0c3 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -17,6 +17,14 @@
 		reg = <0x0 0x2000000>;
 	};
 
+	clocks {
+		ref12: ref12M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+	};
+
 	flash@80000000,0 {
 		compatible = "numonyx,js28f128", "cfi-flash";
 		reg = <0x80000000 0x1000000>;
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index da1d8effef9..1fd27ed65a0 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -26,12 +26,6 @@
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		ref12: ref12M {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
 	};
 
 	soc {