Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...

95 files changed, 4798 insertions, 790 deletions

diff --git a/Documentation/arm/sti/overview.txt b/Documentation/arm/sti/overview.txt
new file mode 100644
index 00000000000..1a4e93d6027
--- /dev/null
+++ b/Documentation/arm/sti/overview.txt
@@ -0,0 +1,33 @@
+			STi ARM Linux Overview
+			==========================
+
+Introduction
+------------
+
+  The ST Microelectronics Multimedia and Application Processors range of
+  CortexA9 System-on-Chip are supported by the 'STi' platform of
+  ARM Linux. Currently STiH415, STiH416 SOCs are supported with both
+  B2000 and B2020 Reference boards.
+
+
+  configuration
+  -------------
+
+  A generic configuration is provided for both STiH415/416, and can be used as the
+  default by
+	make stih41x_defconfig
+
+  Layout
+  ------
+  All the files for multiple machine families (STiH415, STiH416, and STiG125)
+  are located in the platform code contained in arch/arm/mach-sti
+
+  There is a generic board board-dt.c in the mach folder which support
+  Flattened Device Tree, which means, It works with any compatible board with
+  Device Trees.
+
+
+  Document Author
+  ---------------
+
+  Srinivas Kandagatla <srinivas.kandagatla@st.com>, (c) 2013 ST Microelectronics
diff --git a/Documentation/arm/sti/stih415-overview.txt b/Documentation/arm/sti/stih415-overview.txt
new file mode 100644
index 00000000000..1383e33f265
--- /dev/null
+++ b/Documentation/arm/sti/stih415-overview.txt
@@ -0,0 +1,12 @@
+			STiH415 Overview
+			================
+
+Introduction
+------------
+
+    The STiH415 is the next generation of HD, AVC set-top box processors
+    for satellite, cable, terrestrial and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.0 GHz, dual-core CPU
+    - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/Documentation/arm/sti/stih416-overview.txt b/Documentation/arm/sti/stih416-overview.txt
new file mode 100644
index 00000000000..558444c201c
--- /dev/null
+++ b/Documentation/arm/sti/stih416-overview.txt
@@ -0,0 +1,12 @@
+			STiH416 Overview
+			================
+
+Introduction
+------------
+
+    The STiH416 is the next generation of HD, AVC set-top box processors
+    for satellite, cable, terrestrial and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.2 GHz dual core CPU
+    - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/Documentation/devicetree/bindings/arm/nspire.txt b/Documentation/devicetree/bindings/arm/nspire.txt
new file mode 100644
index 00000000000..4d08518bd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nspire.txt
@@ -0,0 +1,14 @@
+TI-NSPIRE calculators
+
+Required properties:
+- compatible: Compatible property value should contain "ti,nspire".
+	CX models should have "ti,nspire-cx"
+	Touchpad models should have "ti,nspire-tp"
+	Clickpad models should have "ti,nspire-clp"
+
+Example:
+
+/ {
+	model = "TI-NSPIRE CX";
+	compatible = "ti,nspire-cx";
+	...
diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
new file mode 100644
index 00000000000..9bcc4b1bff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
@@ -0,0 +1,201 @@
+* Samsung Exynos5420 Clock Controller
+
+The Exynos5420 clock controller generates and supplies clock to various
+controllers within the Exynos5420 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  fin_pll		1
+
+  [Clock Gate for Special Clocks]
+
+  Clock			ID
+  ----------------------------
+  sclk_uart0		128
+  sclk_uart1		129
+  sclk_uart2		130
+  sclk_uart3		131
+  sclk_mmc0		132
+  sclk_mmc1		133
+  sclk_mmc2		134
+  sclk_spi0		135
+  sclk_spi1		136
+  sclk_spi2		137
+  sclk_i2s1		138
+  sclk_i2s2		139
+  sclk_pcm1		140
+  sclk_pcm2		141
+  sclk_spdif		142
+  sclk_hdmi		143
+  sclk_pixel		144
+  sclk_dp1		145
+  sclk_mipi1		146
+  sclk_fimd1		147
+  sclk_maudio0		148
+  sclk_maupcm0		149
+  sclk_usbd300		150
+  sclk_usbd301		151
+  sclk_usbphy300	152
+  sclk_usbphy301	153
+  sclk_unipro		154
+  sclk_pwm		155
+  sclk_gscl_wa		156
+  sclk_gscl_wb		157
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  aclk66_peric		256
+  uart0			257
+  uart1			258
+  uart2			259
+  uart3			260
+  i2c0			261
+  i2c1			262
+  i2c2			263
+  i2c3			264
+  i2c4			265
+  i2c5			266
+  i2c6			267
+  i2c7			268
+  i2c_hdmi		269
+  tsadc			270
+  spi0			271
+  spi1			272
+  spi2			273
+  keyif			274
+  i2s1			275
+  i2s2			276
+  pcm1			277
+  pcm2			278
+  pwm			279
+  spdif			280
+  i2c8			281
+  i2c9			282
+  i2c10			283
+  aclk66_psgen		300
+  chipid		301
+  sysreg		302
+  tzpc0			303
+  tzpc1			304
+  tzpc2			305
+  tzpc3			306
+  tzpc4			307
+  tzpc5			308
+  tzpc6			309
+  tzpc7			310
+  tzpc8			311
+  tzpc9			312
+  hdmi_cec		313
+  seckey		314
+  mct			315
+  wdt			316
+  rtc			317
+  tmu			318
+  tmu_gpu		319
+  pclk66_gpio		330
+  aclk200_fsys2		350
+  mmc0			351
+  mmc1			352
+  mmc2			353
+  sromc			354
+  ufs			355
+  aclk200_fsys		360
+  tsi			361
+  pdma0			362
+  pdma1			363
+  rtic			364
+  usbh20		365
+  usbd300		366
+  usbd301		377
+  aclk400_mscl		380
+  mscl0			381
+  mscl1			382
+  mscl2			383
+  smmu_mscl0		384
+  smmu_mscl1		385
+  smmu_mscl2		386
+  aclk333		400
+  mfc			401
+  smmu_mfcl		402
+  smmu_mfcr		403
+  aclk200_disp1		410
+  dsim1			411
+  dp1			412
+  hdmi			413
+  aclk300_disp1		420
+  fimd1			421
+  smmu_fimd1		422
+  aclk166		430
+  mixer			431
+  aclk266		440
+  rotator		441
+  mdma1			442
+  smmu_rotator		443
+  smmu_mdma1		444
+  aclk300_jpeg		450
+  jpeg			451
+  jpeg2			452
+  smmu_jpeg		453
+  aclk300_gscl		460
+  smmu_gscl0		461
+  smmu_gscl1		462
+  gscl_wa		463
+  gscl_wb		464
+  gscl0			465
+  gscl1			466
+  clk_3aa		467
+  aclk266_g2d		470
+  sss			471
+  slim_sss		472
+  mdma0			473
+  aclk333_g2d		480
+  g2d			481
+  aclk333_432_gscl	490
+  smmu_3aa		491
+  smmu_fimcl0		492
+  smmu_fimcl1		493
+  smmu_fimcl3		494
+  fimc_lite3		495
+  aclk_g3d		500
+  g3d			501
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5420-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 259>, <&clock 130>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 72e9cd1e89b..36281e7a2a4 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -15,6 +15,7 @@ Required Properties:
   - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
+  - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d247d100398..db0457d6168 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -31,6 +31,7 @@ idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
 linux	Linux-specific binding
+lsi	LSI Corp. (LSI Logic)
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
 mosaixtech	Mosaix Technologies, Inc.
diff --git a/MAINTAINERS b/MAINTAINERS
index 8128b141b92..e626794c386 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1203,6 +1203,15 @@ M:	Dinh Nguyen <dinguyen@altera.com>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
+ARM/STI ARCHITECTURE
+M:	Srinivas Kandagatla <srinivas.kandagatla@st.com>
+M:	Stuart Menefy <stuart.menefy@st.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	kernel@stlinux.com
+W:	http://www.stlinux.com
+S:	Maintained
+F:	arch/arm/mach-sti/
+
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 49fdc432512..de7049bdea8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -625,8 +625,8 @@ config ARCH_MSM
 	bool "Qualcomm MSM"
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -969,6 +969,8 @@ source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
 
+source "arch/arm/mach-nspire/Kconfig"
+
 source "arch/arm/plat-omap/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
@@ -996,6 +998,8 @@ source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/mach-spear/Kconfig"
 
+source "arch/arm/mach-sti/Kconfig"
+
 source "arch/arm/mach-s3c24xx/Kconfig"
 
 if ARCH_S3C64XX
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index ab95f07e154..77c1411c9a9 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -362,6 +362,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on NOMADIK based platforms.
 
+	config DEBUG_NSPIRE_CLASSIC_UART
+		bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
+		depends on ARCH_NSPIRE
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on TI-NSPIRE classic models.
+
+	config DEBUG_NSPIRE_CX_UART
+		bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
+		depends on ARCH_NSPIRE
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on TI-NSPIRE CX models.
+
 	config DEBUG_OMAP2PLUS_UART
 		bool "Kernel low-level debugging messages via OMAP2PLUS UART"
 		depends on ARCH_OMAP2PLUS
@@ -543,6 +557,16 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
+	config DEBUG_STI_UART
+		depends on ARCH_STI
+		bool "Use StiH415/416 ASC for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on StiH415/416 based platforms like B2000, B2020.
+		  It support UART2 and SBC_UART1.
+
+		  If unsure, say N.
+
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
 		depends on !ARCH_MULTIPLATFORM
@@ -704,6 +728,30 @@ choice
 
 endchoice
 
+choice
+	prompt "Low-level debug console UART"
+	depends on DEBUG_LL && DEBUG_STI_UART
+
+	config STIH41X_DEBUG_ASC2
+		bool "ASC2 UART"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2000, which has
+		  default UART wired up to ASC2.
+
+		  If unsure, say N.
+
+	config STIH41X_DEBUG_SBC_ASC1
+		bool "SBC ASC1 UART"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2020. which has
+		  default UART wired up to SBC ASC1.
+
+		  If unsure, say N.
+
+endchoice
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/bcm2835.S" if DEBUG_BCM2835
@@ -726,6 +774,8 @@ config DEBUG_LL_INCLUDE
 				   DEBUG_MVEBU_UART_ALTERNATE
 	default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default "debug/nomadik.S" if DEBUG_NOMADIK_UART
+	default "debug/nspire.S" if 	DEBUG_NSPIRE_CX_UART || \
+					DEBUG_NSPIRE_CLASSIC_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \
@@ -733,6 +783,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+	default "debug/sti.S" if DEBUG_STI_UART
 	default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/u300.S" if DEBUG_U300_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c01e4a72855..72caf82a828 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -165,6 +165,7 @@ machine-$(CONFIG_ARCH_MXS)		+= mxs
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
+machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
@@ -193,6 +194,7 @@ machine-$(CONFIG_ARCH_W90X900)		+= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
 machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
+machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 962c0eee303..641b3c9a702 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5420-smdk5420.dtb \
 	exynos5440-ssdk5440.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
@@ -148,6 +149,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
+dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
+	nspire-tp.dtb \
+	nspire-clp.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
@@ -197,6 +201,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \
+	stih416-b2000.dtb \
+	stih415-b2020.dtb \
+	stih416-b2020.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun4i-a10-cubieboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 422fdb3fcfc..e750ab9086d 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -10,7 +10,7 @@
  * option) any later version.
  */
 /dts-v1/;
-/include/ "da850.dtsi"
+#include "da850.dtsi"
 
 / {
 	compatible = "enbw,cmc", "ti,da850";
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index c914357c0d8..5bce7cc55cf 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -8,7 +8,7 @@
  * Free Software Foundation, version 2.
  */
 /dts-v1/;
-/include/ "da850.dtsi"
+#include "da850.dtsi"
 
 / {
 	compatible = "ti,da850-evm", "ti,da850";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 2c88313d2c7..d70ba550448 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -7,7 +7,7 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	arm {
@@ -37,7 +37,7 @@
 			#size-cells = <0>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0xffffffff>;
+			pinctrl-single,function-mask = <0xf>;
 			status = "disabled";
 
 			nand_cs3_pins: pinmux_nand_pins {
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
new file mode 100644
index 00000000000..f65e124c04a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Samsung's Exynos5 SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
+ * SoCs from Exynos5 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		samsung,combiner-nr = <32>;
+		reg = <0x10440000 0x1000>;
+		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+	};
+
+	gic:interrupt-controller@10481000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg =	<0x10481000 0x1000>,
+			<0x10482000 0x1000>,
+			<0x10484000 0x2000>,
+			<0x10486000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	dwmmc_0: dwmmc0@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 51 0>;
+	};
+
+	serial@12C10000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C10000 0x100>;
+		interrupts = <0 52 0>;
+	};
+
+	serial@12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C20000 0x100>;
+		interrupts = <0 53 0>;
+	};
+
+	serial@12C30000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C30000 0x100>;
+		interrupts = <0 54 0>;
+	};
+
+	rtc {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x101E0000 0x100>;
+		interrupts = <0 43 0>, <0 44 0>;
+		status = "disabled";
+	};
+
+	watchdog {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x101D0000 0x100>;
+		interrupts = <0 42 0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 964158c1844..41cd625b602 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -17,14 +17,13 @@
  * published by the Free Software Foundation.
 */
 
-#include "skeleton.dtsi"
+#include "exynos5.dtsi"
 #include "exynos5250-pinctrl.dtsi"
 
 #include <dt-bindings/clk/exynos-audss-clk.h>
 
 / {
 	compatible = "samsung,exynos5250";
-	interrupt-parent = <&gic>;
 
 	aliases {
 		spi0 = &spi_0;
@@ -53,9 +52,20 @@
 		pinctrl3 = &pinctrl_3;
 	};
 
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
 	};
 
 	pd_gsc: gsc-power-domain@0x10044000 {
@@ -80,17 +90,6 @@
 		#clock-cells = <1>;
 	};
 
-	gic:interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10481000 0x1000>,
-		      <0x10482000 0x1000>,
-		      <0x10484000 0x2000>,
-		      <0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 13 0xf08>,
@@ -99,22 +98,6 @@
 			     <1 10 0xf08>;
 	};
 
-	combiner:interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-			     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-			     <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
-
 	mct@101C0000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x101C0000 0x800>;
@@ -176,9 +159,6 @@
 	};
 
 	watchdog {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
 		clocks = <&clock 336>;
 		clock-names = "watchdog";
 	};
@@ -191,12 +171,8 @@
 	};
 
 	rtc {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
 		clocks = <&clock 337>;
 		clock-names = "rtc";
-		status = "disabled";
 	};
 
 	tmu@10060000 {
@@ -208,33 +184,21 @@
 	};
 
 	serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
 		clocks = <&clock 289>, <&clock 146>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
 		clocks = <&clock 290>, <&clock 147>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
 		clocks = <&clock 291>, <&clock 148>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
 
 	serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
 		clocks = <&clock 292>, <&clock 149>;
 		clock-names = "uart", "clk_uart_baud0";
 	};
@@ -413,31 +377,19 @@
 	};
 
 	dwmmc_0: dwmmc0@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clocks = <&clock 280>, <&clock 139>;
 		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_1: dwmmc1@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12210000 0x1000>;
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clocks = <&clock 281>, <&clock 140>;
 		clock-names = "biu", "ciu";
 	};
 
 	dwmmc_2: dwmmc2@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12220000 0x1000>;
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		clocks = <&clock 282>, <&clock 141>;
 		clock-names = "biu", "ciu";
 	};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
new file mode 100644
index 00000000000..5848c425ae4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -0,0 +1,680 @@
+/*
+ * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@13400000 {
+		gpy7: gpy7 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+				     <26 0>, <26 1>, <27 0>, <27 1>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+				     <30 0>, <30 1>, <31 0>, <31 1>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@13410000 {
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpc0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpc0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpc0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpc0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpc1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpc1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpc1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_int: sd1-int {
+			samsung,pins = "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpc1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus8: sd1-bus-width8 {
+			samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpc2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpc2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpc2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpc2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+	};
+
+	pinctrl@14000000 {
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj4: gpj4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cam_gpio_a: cam-gpio-a {
+			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				       "gpe1-0", "gpe1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_b: cam-gpio-b {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c2_bus: cam-i2c2-bus {
+			samsung,pins = "gpf0-4", "gpf0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+		cam_spi1_bus: cam-spi1-bus {
+			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c1_bus: cam-i2c1-bus {
+			samsung,pins = "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c0_bus: cam-i2c0-bus {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi0_bus: cam-spi0-bus {
+			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_bayrgb_bus: cam-bayrgb-bus {
+			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+				       "gpg2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@14010000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb4: gpb4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_hs_bus: i2c4-hs-bus {
+			samsung,pins = "gpa2-0", "gpa2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_hs_bus: i2c5-hs-bus {
+			samsung,pins = "gpa2-2", "gpa2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpb1-0", "gpb1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_hs_bus: i2c6-hs-bus {
+			samsung,pins = "gpb1-3", "gpb1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_hs_bus: i2c7-hs-bus {
+			samsung,pins = "gpb2-2", "gpb2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c8_hs_bus: i2c8-hs-bus {
+			samsung,pins = "gpb3-4", "gpb3-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c9_hs_bus: i2c9-hs-bus {
+			samsung,pins = "gpb3-6", "gpb3-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c10_hs_bus: i2c10-hs-bus {
+			samsung,pins = "gpb4-0", "gpb4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
new file mode 100644
index 00000000000..08607df6a18
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -0,0 +1,33 @@
+/*
+ * SAMSUNG SMDK5420 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Samsung SMDK5420 board based on EXYNOS5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5420";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200 init=/linuxrc";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
new file mode 100644
index 00000000000..8c54c4b74f0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -0,0 +1,148 @@
+/*
+ * SAMSUNG EXYNOS5420 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
+ * EXYNOS5420 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5.dtsi"
+/include/ "exynos5420-pinctrl.dtsi"
+/ {
+	compatible = "samsung,exynos5420";
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		pinctrl4 = &pinctrl_4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clock-frequency = <1800000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+		};
+	};
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5420-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <1>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>;
+		clocks = <&clock 1>, <&clock 315>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &combiner 23 3>,
+					<1 &combiner 23 4>,
+					<2 &combiner 25 2>,
+					<3 &combiner 25 3>,
+					<4 &gic 0 120 0>,
+					<5 &gic 0 121 0>,
+					<6 &gic 0 122 0>,
+					<7 &gic 0 123 0>;
+		};
+	};
+
+	pinctrl_0: pinctrl@13400000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@13410000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x13410000 0x1000>;
+		interrupts = <0 78 0>;
+	};
+
+	pinctrl_2: pinctrl@14000000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x14000000 0x1000>;
+		interrupts = <0 46 0>;
+	};
+
+	pinctrl_3: pinctrl@14010000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x14010000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_4: pinctrl@03860000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	serial@12C00000 {
+		clocks = <&clock 257>, <&clock 128>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	serial@12C10000 {
+		clocks = <&clock 258>, <&clock 129>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	serial@12C20000 {
+		clocks = <&clock 259>, <&clock 130>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	serial@12C30000 {
+		clocks = <&clock 260>, <&clock 131>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
new file mode 100644
index 00000000000..9565199bce7
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -0,0 +1,74 @@
+/*
+ *  linux/arch/arm/boot/nspire-classic.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	lcd-type = "classic";
+};
+
+&fast_timer {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+};
+
+&uart {
+	compatible = "ns16550";
+	reg-shift = <2>;
+	reg-io-width = <4>;
+	clocks = <&apb_pclk>;
+	no-loopback-test;
+};
+
+&timer0 {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+};
+
+&timer1 {
+	compatible = "lsi,zevio-timer";
+	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+};
+
+&keypad {
+	active-low;
+
+};
+
+&base_clk {
+	compatible = "lsi,nspire-classic-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-classic-ahb-divider";
+};
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x2000000>; /* 32 MB */
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@DC000000 {
+			compatible = "lsi,zevio-intc";
+			interrupt-controller;
+			reg = <0xDC000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts
new file mode 100644
index 00000000000..fa5a044656d
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-clp.dts
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/boot/nspire-clp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00020039
+	0x0004002c 	0x00050034 	0x00060015
+	0x0007000b 	0x0008002d 	0x01000033
+	0x0101004e 	0x01020011 	0x01030004
+	0x0104002f 	0x01050003 	0x01060016
+	0x01070002 	0x01080014 	0x02000062
+	0x0201000c 	0x0202001f 	0x02030007
+	0x02040013 	0x02050006 	0x02060010
+	0x02070005 	0x02080019 	0x03000027
+	0x03010037 	0x03020018 	0x0303000a
+	0x03040031 	0x03050009 	0x03060032
+	0x03070008 	0x03080026 	0x04000028
+	0x04010035 	0x04020025 	0x04040024
+	0x04060017 	0x04080023 	0x05000028
+	0x05020022 	0x0503001b 	0x05040021
+	0x0505001a 	0x05060012 	0x0507006f
+	0x05080020 	0x0509002a 	0x0601001c
+	0x0602002e 	0x06030068 	0x06040030
+	0x0605006d 	0x0606001e 	0x06070001
+	0x0608002b 	0x0609000f 	0x07000067
+	0x0702006a 	0x0704006c 	0x07060069
+	0x0707000e 	0x0708001d 	0x070a000d
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Clickpad";
+	compatible = "ti,nspire-clp";
+};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
new file mode 100644
index 00000000000..375b924f60d
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -0,0 +1,112 @@
+/*
+ *  linux/arch/arm/boot/nspire-cx.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	lcd-type = "cx";
+};
+
+&fast_timer {
+	/* compatible = "arm,sp804", "arm,primecell"; */
+};
+
+&uart {
+	compatible = "arm,pl011", "arm,primecell";
+
+	clocks = <&uart_clk>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+};
+
+&timer0 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&timer1 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&base_clk {
+	compatible = "lsi,nspire-cx-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-cx-ahb-divider";
+};
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+/ {
+	model = "TI-NSPIRE CX";
+	compatible = "ti,nspire-cx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>; /* 64 MB */
+	};
+
+	uart_clk: uart_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@DC000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xDC000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		apb@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			i2c@90050000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x90050000 0x1000>;
+				interrupts = <20>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts
new file mode 100644
index 00000000000..621391ce6ed
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-tp.dts
@@ -0,0 +1,44 @@
+/*
+ *  linux/arch/arm/boot/nspire-tp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+/ {
+	model = "TI-NSPIRE Touchpad";
+	compatible = "ti,nspire-tp";
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
new file mode 100644
index 00000000000..a22ffe633b4
--- /dev/null
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/arm/boot/nspire.dtsi
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	bootrom: bootrom@00000000 {
+		reg = <0x00000000 0x80000>;
+	};
+
+	sram: sram@A4000000 {
+		device = "memory";
+		reg = <0xA4000000 0x20000>;
+	};
+
+	timer_clk: timer_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	base_clk: base_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+	};
+
+	ahb_clk: ahb_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+		clocks = <&base_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&ahb_clk>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		spi: spi@A9000000 {
+			reg = <0xA9000000 0x1000>;
+		};
+
+		usb0: usb@B0000000 {
+			reg = <0xB0000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		usb1: usb@B4000000 {
+			reg = <0xB4000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		lcd: lcd@C0000000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <21>;
+
+			clocks = <&apb_pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		adc: adc@C4000000 {
+			reg = <0xC4000000 0x1000>;
+			interrupts = <11>;
+		};
+
+		tdes: crypto@C8010000 {
+			reg = <0xC8010000 0x1000>;
+		};
+
+		sha256: crypto@CC000000 {
+			reg = <0xCC000000 0x1000>;
+		};
+
+		apb@90000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-ranges;
+			ranges;
+
+			gpio: gpio@90000000 {
+				reg = <0x90000000 0x1000>;
+				interrupts = <7>;
+			};
+
+			fast_timer: timer@90010000 {
+				reg = <0x90010000 0x1000>;
+				interrupts = <17>;
+			};
+
+			uart: serial@90020000 {
+				reg = <0x90020000 0x1000>;
+				interrupts = <1>;
+			};
+
+			timer0: timer@900C0000 {
+				reg = <0x900C0000 0x1000>;
+
+				clocks = <&timer_clk>;
+			};
+
+			timer1: timer@900D0000 {
+				reg = <0x900D0000 0x1000>;
+				interrupts = <19>;
+
+				clocks = <&timer_clk>;
+			};
+
+			watchdog: watchdog@90060000 {
+				compatible = "arm,amba-primecell";
+				reg = <0x90060000 0x1000>;
+				interrupts = <3>;
+			};
+
+			rtc: rtc@90090000 {
+				reg = <0x90090000 0x1000>;
+				interrupts = <4>;
+			};
+
+			misc: misc@900A0000 {
+				reg = <0x900A0000 0x1000>;
+			};
+
+			pwr: pwr@900B0000 {
+				reg = <0x900B0000 0x1000>;
+				interrupts = <15>;
+			};
+
+			keypad: input@900E0000 {
+				compatible = "ti,nspire-keypad";
+				reg = <0x900E0000 0x1000>;
+				interrupts = <16>;
+
+				scan-interval = <1000>;
+				row-delay = <200>;
+
+				clocks = <&apb_pclk>;
+			};
+
+			contrast: contrast@900F0000 {
+				reg = <0x900F0000 0x1000>;
+			};
+
+			led: led@90110000 {
+				reg = <0x90110000 0x1000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st-pincfg.h b/arch/arm/boot/dts/st-pincfg.h
new file mode 100644
index 00000000000..8c45d85ac13
--- /dev/null
+++ b/arch/arm/boot/dts/st-pincfg.h
@@ -0,0 +1,71 @@
+#ifndef _ST_PINCFG_H_
+#define _ST_PINCFG_H_
+
+/* Alternate functions */
+#define ALT1	1
+#define ALT2	2
+#define ALT3	3
+#define ALT4	4
+#define ALT5	5
+#define ALT6	6
+#define ALT7	7
+
+/* Output enable */
+#define OE			(1 << 27)
+/* Pull Up */
+#define PU			(1 << 26)
+/* Open Drain */
+#define OD			(1 << 26)
+#define RT			(1 << 23)
+#define INVERTCLK		(1 << 22)
+#define CLKNOTDATA		(1 << 21)
+#define DOUBLE_EDGE		(1 << 20)
+#define CLK_A			(0 << 18)
+#define CLK_B			(1 << 18)
+#define CLK_C			(2 << 18)
+#define CLK_D			(3 << 18)
+
+/* User-frendly defines for Pin Direction */
+		/* oe = 0, pu = 0, od = 0 */
+#define IN			(0)
+		/* oe = 0, pu = 1, od = 0 */
+#define IN_PU			(PU)
+		/* oe = 1, pu = 0, od = 0 */
+#define OUT			(OE)
+		/* oe = 1, pu = 0, od = 1 */
+#define BIDIR			(OE | OD)
+		/* oe = 1, pu = 1, od = 1 */
+#define BIDIR_PU		(OE | PU | OD)
+
+/* RETIME_TYPE */
+/*
+ * B Mode
+ * Bypass retime with optional delay parameter
+ */
+#define BYPASS		(0)
+/*
+ * R0, R1, R0D, R1D modes
+ * single-edge data non inverted clock, retime data with clk
+ */
+#define SE_NICLK_IO	(RT)
+/*
+ * RIV0, RIV1, RIV0D, RIV1D modes
+ * single-edge data inverted clock, retime data with clk
+ */
+#define SE_ICLK_IO	(RT | INVERTCLK)
+/*
+ * R0E, R1E, R0ED, R1ED modes
+ * double-edge data, retime data with clk
+ */
+#define DE_IO		(RT | DOUBLE_EDGE)
+/*
+ * CIV0, CIV1 modes with inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define ICLK		(RT | CLKNOTDATA | INVERTCLK)
+/*
+ * CLK0, CLK1 modes with non-inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define NICLK		(RT | CLKNOTDATA)
+#endif /* _ST_PINCFG_H_ */
diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts
new file mode 100644
index 00000000000..d4af5316043
--- /dev/null
+++ b/arch/arm/boot/dts/stih415-b2000.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih415.dtsi"
+#include "stih41x-b2000.dtsi"
+/ {
+	model = "STiH415 B2000 Board";
+	compatible = "st,stih415", "st,stih415-b2000";
+};
diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts
new file mode 100644
index 00000000000..442b019e9a3
--- /dev/null
+++ b/arch/arm/boot/dts/stih415-b2020.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih415.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+	model = "STiH415 B2020 Board";
+	compatible = "st,stih415", "st,stih415-b2020";
+};
diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi
new file mode 100644
index 00000000000..174c799df74
--- /dev/null
+++ b/arch/arm/boot/dts/stih415-clock.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+	clocks {
+		/*
+		 * Fixed 30MHz oscillator input to SoC
+		 */
+		CLK_SYSIN: CLK_SYSIN {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: arm_periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <500000000>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		CLKS_ICN_REG_0: CLKS_ICN_REG_0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
new file mode 100644
index 00000000000..1d322b24d1e
--- /dev/null
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -0,0 +1,268 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+	aliases {
+		gpio0	= &PIO0;
+		gpio1	= &PIO1;
+		gpio2	= &PIO2;
+		gpio3	= &PIO3;
+		gpio4	= &PIO4;
+		gpio5	= &PIO5;
+		gpio6	= &PIO6;
+		gpio7	= &PIO7;
+		gpio8	= &PIO8;
+		gpio9	= &PIO9;
+		gpio10	= &PIO10;
+		gpio11	= &PIO11;
+		gpio12	= &PIO12;
+		gpio13	= &PIO13;
+		gpio14	= &PIO14;
+		gpio15	= &PIO15;
+		gpio16	= &PIO16;
+		gpio17	= &PIO17;
+		gpio18	= &PIO18;
+		gpio19	= &PIO100;
+		gpio20	= &PIO101;
+		gpio21	= &PIO102;
+		gpio22	= &PIO103;
+		gpio23	= &PIO104;
+		gpio24	= &PIO105;
+		gpio25	= &PIO106;
+		gpio26	= &PIO107;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-sbc-pinctrl";
+			st,syscfg	= <&syscfg_sbc>;
+			ranges 		= <0 0xfe610000 0x5000>;
+
+			PIO0: gpio@fe610000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO0";
+			};
+			PIO1: gpio@fe611000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO1";
+			};
+			PIO2: gpio@fe612000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO2";
+			};
+			PIO3: gpio@fe613000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO3";
+			};
+			PIO4: gpio@fe614000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO4";
+			};
+
+			sbc_serial1 {
+				pinctrl_sbc_serial1:sbc_serial1 {
+					st,pins {
+						tx	= <&PIO2 6 ALT3 OUT>;
+						rx	= <&PIO2 7 ALT3 IN>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-front-pinctrl";
+			st,syscfg	= <&syscfg_front>;
+			ranges		= <0 0xfee00000 0x8000>;
+
+			PIO5: gpio@fee00000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO5";
+			};
+			PIO6: gpio@fee01000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO6";
+			};
+			PIO7: gpio@fee02000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO7";
+			};
+			PIO8: gpio@fee03000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO8";
+			};
+			PIO9: gpio@fee04000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO9";
+			};
+			PIO10: gpio@fee05000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO10";
+			};
+			PIO11: gpio@fee06000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x6000 0x100>;
+				st,bank-name	= "PIO11";
+			};
+			PIO12: gpio@fee07000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x7000 0x100>;
+				st,bank-name	= "PIO12";
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-rear-pinctrl";
+			st,syscfg	= <&syscfg_rear>;
+			ranges		= <0 0xfe820000 0x8000>;
+
+			PIO13: gpio@fe820000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO13";
+			};
+			PIO14: gpio@fe821000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO14";
+			};
+			PIO15: gpio@fe822000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO15";
+			};
+			PIO16: gpio@fe823000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO16";
+			};
+			PIO17: gpio@fe824000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO17";
+			};
+			PIO18: gpio@fe825000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO18";
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx	= <&PIO17 4 ALT2 OUT>;
+						rx	= <&PIO17 5 ALT2 IN>;
+					};
+				};
+			};
+		};
+
+		pin-controller-left {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-left-pinctrl";
+			st,syscfg	= <&syscfg_left>;
+			ranges		= <0 0xfd6b0000 0x3000>;
+
+			PIO100: gpio@fd6b0000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO100";
+			};
+			PIO101: gpio@fd6b1000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO101";
+			};
+			PIO102: gpio@fd6b2000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO102";
+			};
+		};
+
+		pin-controller-right {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-right-pinctrl";
+			st,syscfg	= <&syscfg_right>;
+			ranges		= <0 0xfd330000 0x5000>;
+
+			PIO103: gpio@fd330000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO103";
+			};
+			PIO104: gpio@fd331000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO104";
+			};
+			PIO105: gpio@fd332000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO105";
+			};
+			PIO106: gpio@fd333000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO106";
+			};
+			PIO107: gpio@fd334000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO107";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
new file mode 100644
index 00000000000..74ab8ded4b4
--- /dev/null
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih415-clock.dtsi"
+#include "stih415-pinctrl.dtsi"
+/ {
+
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0xfffe2000 0x1000>;
+		arm,data-latency = <3 2 2>;
+		arm,tag-latency = <1 1 1>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible	= "simple-bus";
+
+		syscfg_sbc: sbc-syscfg@fe600000{
+			compatible      = "st,stih415-sbc-syscfg", "syscon";
+			reg		= <0xfe600000 0xb4>;
+		};
+
+		syscfg_front: front-syscfg@fee10000{
+			compatible      = "st,stih415-front-syscfg", "syscon";
+			reg		= <0xfee10000 0x194>;
+		};
+
+		syscfg_rear: rear-syscfg@fe830000{
+			compatible      = "st,stih415-rear-syscfg", "syscon";
+			reg		= <0xfe830000 0x190>;
+		};
+
+		/* MPE syscfgs */
+		syscfg_left: left-syscfg@fd690000{
+			compatible      = "st,stih415-left-syscfg", "syscon";
+			reg		= <0xfd690000 0x78>;
+		};
+
+		syscfg_right: right-syscfg@fd320000{
+			compatible      = "st,stih415-right-syscfg", "syscon";
+			reg		= <0xfd320000 0x180>;
+		};
+
+		syscfg_system: system-syscfg@fdde0000  {
+			compatible      = "st,stih415-system-syscfg", "syscon";
+			reg		= <0xfdde0000 0x15c>;
+		};
+
+		syscfg_lpm: lpm-syscfg@fe4b5100{
+			compatible      = "st,stih415-lpm-syscfg", "syscon";
+			reg		= <0xfe4b5100 0x08>;
+		};
+
+		serial2: serial@fed32000 {
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfed32000 0x2c>;
+			interrupts	= <0 197 0>;
+			pinctrl-names 	= "default";
+			pinctrl-0 	= <&pinctrl_serial2>;
+			clocks		= <&CLKS_ICN_REG_0>;
+		};
+
+		/* SBC comms block ASCs in SASG1 */
+		sbc_serial1: serial@fe531000 {
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfe531000 0x2c>;
+			interrupts	= <0 210 0>;
+			clocks		= <&CLK_SYSIN>;
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_sbc_serial1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts
new file mode 100644
index 00000000000..a5eb6eee10b
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-b2000.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2000.dtsi"
+
+/ {
+	compatible = "st,stih416", "st,stih416-b2000";
+	model = "STiH416 B2000";
+};
diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts
new file mode 100644
index 00000000000..276f28da573
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-b2020.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+	model = "STiH416 B2020";
+	compatible = "st,stih416", "st,stih416-b2020";
+
+};
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi
new file mode 100644
index 00000000000..7026bf1158d
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-clock.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics R&D Limited
+ * <stlinux-devel@stlinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+	clocks {
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		CLK_SYSIN: CLK_SYSIN {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+			clock-output-names = "CLK_SYSIN";
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: arm_periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <600000000>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		CLK_S_ICN_REG_0: clockgenA0@4 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+			clock-output-names = "CLK_S_ICN_REG_0";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
new file mode 100644
index 00000000000..957b21a71b4
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -0,0 +1,295 @@
+
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+	aliases {
+		gpio0	= &PIO0;
+		gpio1	= &PIO1;
+		gpio2	= &PIO2;
+		gpio3	= &PIO3;
+		gpio4	= &PIO4;
+		gpio5	= &PIO40;
+		gpio6	= &PIO5;
+		gpio7	= &PIO6;
+		gpio8	= &PIO7;
+		gpio9	= &PIO8;
+		gpio10	= &PIO9;
+		gpio11	= &PIO10;
+		gpio12	= &PIO11;
+		gpio13	= &PIO12;
+		gpio14	= &PIO30;
+		gpio15	= &PIO31;
+		gpio16	= &PIO13;
+		gpio17	= &PIO14;
+		gpio18	= &PIO15;
+		gpio19	= &PIO16;
+		gpio20	= &PIO17;
+		gpio21	= &PIO18;
+		gpio22	= &PIO100;
+		gpio23	= &PIO101;
+		gpio24	= &PIO102;
+		gpio25	= &PIO103;
+		gpio26	= &PIO104;
+		gpio27	= &PIO105;
+		gpio28	= &PIO106;
+		gpio29	= &PIO107;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-sbc-pinctrl";
+			st,syscfg	= <&syscfg_sbc>;
+			ranges		= <0 0xfe610000 0x6000>;
+
+			PIO0: gpio@fe610000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO0";
+			};
+			PIO1: gpio@fe611000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO1";
+			};
+			PIO2: gpio@fe612000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO2";
+			};
+			PIO3: gpio@fe613000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO3";
+			};
+			PIO4: gpio@fe614000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO4";
+			};
+			PIO40: gpio@fe615000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO40";
+				st,retime-pin-mask = <0x7f>;
+			};
+
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1 {
+					st,pins {
+						tx	= <&PIO2 6 ALT3 OUT>;
+						rx	= <&PIO2 7 ALT3 IN>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-front-pinctrl";
+			st,syscfg	= <&syscfg_front>;
+			ranges		= <0 0xfee00000 0x10000>;
+
+			PIO5: gpio@fee00000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO5";
+			};
+			PIO6: gpio@fee01000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO6";
+			};
+			PIO7: gpio@fee02000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO7";
+			};
+			PIO8: gpio@fee03000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO8";
+			};
+			PIO9: gpio@fee04000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO9";
+			};
+			PIO10: gpio@fee05000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO10";
+			};
+			PIO11: gpio@fee06000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x6000 0x100>;
+				st,bank-name	= "PIO11";
+			};
+			PIO12: gpio@fee07000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x7000 0x100>;
+				st,bank-name	= "PIO12";
+			};
+			PIO30: gpio@fee08000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x8000 0x100>;
+				st,bank-name	= "PIO30";
+			};
+			PIO31: gpio@fee09000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x9000 0x100>;
+				st,bank-name	= "PIO31";
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-rear-pinctrl";
+			st,syscfg	= <&syscfg_rear>;
+			ranges 		= <0 0xfe820000 0x6000>;
+
+			PIO13: gpio@fe820000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO13";
+			};
+			PIO14: gpio@fe821000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO14";
+			};
+			PIO15: gpio@fe822000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO15";
+			};
+			PIO16: gpio@fe823000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO16";
+			};
+			PIO17: gpio@fe824000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO17";
+			};
+			PIO18: gpio@fe825000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO18";
+				st,retime-pin-mask = <0xf>;
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx	= <&PIO17 4 ALT2 OUT>;
+						rx	= <&PIO17 5 ALT2 IN>;
+						output-enable	= <&PIO11 3 ALT2 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-fvdp-fe {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-fvdp-fe-pinctrl";
+			st,syscfg	= <&syscfg_fvdp_fe>;
+			ranges		= <0 0xfd6b0000 0x3000>;
+
+			PIO100: gpio@fd6b0000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO100";
+			};
+			PIO101: gpio@fd6b1000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO101";
+			};
+			PIO102: gpio@fd6b2000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO102";
+			};
+		};
+
+		pin-controller-fvdp-lite {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-fvdp-lite-pinctrl";
+			st,syscfg		= <&syscfg_fvdp_lite>;
+			ranges			= <0 0xfd330000 0x5000>;
+
+			PIO103: gpio@fd330000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO103";
+			};
+			PIO104: gpio@fd331000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO104";
+			};
+			PIO105: gpio@fd332000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO105";
+			};
+			PIO106: gpio@fd333000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO106";
+			};
+
+			PIO107: gpio@fd334000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO107";
+				st,retime-pin-mask = <0xf>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
new file mode 100644
index 00000000000..3cecd9689a4
--- /dev/null
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2012 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih416-clock.dtsi"
+#include "stih416-pinctrl.dtsi"
+/ {
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0xfffe2000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible	= "simple-bus";
+
+		syscfg_sbc:sbc-syscfg@fe600000{
+			compatible	= "st,stih416-sbc-syscfg", "syscon";
+			reg		= <0xfe600000 0x1000>;
+		};
+
+		syscfg_front:front-syscfg@fee10000{
+			compatible	= "st,stih416-front-syscfg", "syscon";
+			reg		= <0xfee10000 0x1000>;
+		};
+
+		syscfg_rear:rear-syscfg@fe830000{
+			compatible	= "st,stih416-rear-syscfg", "syscon";
+			reg		= <0xfe830000 0x1000>;
+		};
+
+		/* MPE */
+		syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
+			compatible	= "st,stih416-fvdp-fe-syscfg", "syscon";
+			reg		= <0xfddf0000 0x1000>;
+		};
+
+		syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
+			compatible	= "st,stih416-fvdp-lite-syscfg", "syscon";
+			reg		= <0xfd6a0000 0x1000>;
+		};
+
+		syscfg_cpu:cpu-syscfg@fdde0000{
+			compatible	= "st,stih416-cpu-syscfg", "syscon";
+			reg		= <0xfdde0000 0x1000>;
+		};
+
+		syscfg_compo:compo-syscfg@fd320000{
+			compatible	= "st,stih416-compo-syscfg", "syscon";
+			reg		= <0xfd320000 0x1000>;
+		};
+
+		syscfg_transport:transport-syscfg@fd690000{
+			compatible	= "st,stih416-transport-syscfg", "syscon";
+			reg		= <0xfd690000 0x1000>;
+		};
+
+		syscfg_lpm:lpm-syscfg@fe4b5100{
+			compatible	= "st,stih416-lpm-syscfg", "syscon";
+			reg		= <0xfe4b5100 0x8>;
+		};
+
+		serial2: serial@fed32000{
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfed32000 0x2c>;
+			interrupts	= <0 197 0>;
+			clocks          = <&CLK_S_ICN_REG_0>;
+			pinctrl-names 	= "default";
+			pinctrl-0 	= <&pinctrl_serial2>;
+		};
+
+		/* SBC_UART1 */
+		sbc_serial1: serial@fe531000 {
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfe531000 0x2c>;
+			interrupts	= <0 210 0>;
+			pinctrl-names 	= "default";
+			pinctrl-0 	= <&pinctrl_sbc_serial1>;
+			clocks          = <&CLK_SYSIN>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
new file mode 100644
index 00000000000..8e694d2b8f5
--- /dev/null
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+
+	memory{
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAS0,115200";
+		linux,stdout-path = &serial2;
+	};
+
+	aliases {
+		ttyAS0 = &serial2;
+	};
+
+	soc {
+		serial2: serial@fed32000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible	= "gpio-leds";
+			fp_led {
+				#gpio-cells = <1>;
+				label	= "Front Panel LED";
+				gpios	= <&PIO105 7>;
+				linux,default-trigger	= "heartbeat";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
new file mode 100644
index 00000000000..133e18143b1
--- /dev/null
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+	memory{
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAS0,115200";
+		linux,stdout-path = &sbc_serial1;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial1;
+	};
+	soc {
+		sbc_serial1: serial@fe531000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible	= "gpio-leds";
+			red {
+				#gpio-cells = <1>;
+				label	= "Front Panel LED";
+				gpios	= <&PIO4 1>;
+				linux,default-trigger	= "heartbeat";
+			};
+			green {
+				gpios	= <&PIO4 7>;
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi
new file mode 100644
index 00000000000..7321403cab8
--- /dev/null
+++ b/arch/arm/boot/dts/stih41x.dtsi
@@ -0,0 +1,38 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	intc: interrupt-controller@fffe1000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfffe1000 0x1000>,
+		      <0xfffe0100 0x100>;
+	};
+
+	scu@fffe0000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfffe0000 0x1000>;
+	};
+
+	timer@fffe0200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfffe0200 0x100>;
+		interrupts = <1 11 0x04>;
+		clocks = <&arm_periph_clk>;
+	};
+};
diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S
new file mode 100644
index 00000000000..886fd276fcb
--- /dev/null
+++ b/arch/arm/include/debug/nspire.S
@@ -0,0 +1,28 @@
+/*
+ *	linux/arch/arm/include/debug/nspire.S
+ *
+ *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define NSPIRE_EARLY_UART_PHYS_BASE	   0x90020000
+#define NSPIRE_EARLY_UART_VIRT_BASE	   0xfee20000
+
+.macro	addruart, rp, rv, tmp
+	ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE)		@ physical base address
+	ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE)		@ virtual base address
+.endm
+
+
+#ifdef CONFIG_DEBUG_NSPIRE_CX_UART
+#include <asm/hardware/debug-pl01x.S>
+#endif
+
+#ifdef CONFIG_DEBUG_NSPIRE_CLASSIC_UART
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
+#endif
diff --git a/arch/arm/include/debug/sti.S b/arch/arm/include/debug/sti.S
new file mode 100644
index 00000000000..e3aa58ff177
--- /dev/null
+++ b/arch/arm/include/debug/sti.S
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/include/debug/sti.S
+ *
+ * Debugging macro include header
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define STIH41X_COMMS_BASE              0xfed00000
+#define STIH41X_ASC2_BASE               (STIH41X_COMMS_BASE+0x32000)
+
+#define STIH41X_SBC_LPM_BASE            0xfe400000
+#define STIH41X_SBC_COMMS_BASE          (STIH41X_SBC_LPM_BASE + 0x100000)
+#define STIH41X_SBC_ASC1_BASE           (STIH41X_SBC_COMMS_BASE + 0x31000)
+
+
+#define VIRT_ADDRESS(x)		(x - 0x1000000)
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2)
+#define DEBUG_LL_UART_BASE	STIH41X_ASC2_BASE
+#endif
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1)
+#define DEBUG_LL_UART_BASE	STIH41X_SBC_ASC1_BASE
+#endif
+
+#ifndef DEBUG_LL_UART_BASE
+#error "DEBUG UART is not Configured"
+#endif
+
+#define ASC_TX_BUF_OFF  0x04
+#define ASC_CTRL_OFF    0x0c
+#define ASC_STA_OFF     0x14
+
+#define ASC_STA_TX_FULL         (1<<9)
+#define ASC_STA_TX_EMPTY        (1<<1)
+
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp,      =DEBUG_LL_UART_BASE	@ physical base
+		ldr	\rv,      =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base
+		.endm
+
+                .macro  senduart,rd,rx
+                strb    \rd, [\rx, #ASC_TX_BUF_OFF]
+                .endm
+
+                .macro  waituart,rd,rx
+1001:           ldr     \rd, [\rx, #ASC_STA_OFF]
+                tst     \rd, #ASC_STA_TX_FULL
+                bne     1001b
+                .endm
+
+                .macro  busyuart,rd,rx
+1001:           ldr     \rd, [\rx, #ASC_STA_OFF]
+                tst     \rd, #ASC_STA_TX_EMPTY
+                beq     1001b
+                .endm
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 0ecd5af2054..2d503b3684c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -78,6 +78,16 @@ config SOC_EXYNOS5250
 	help
 	  Enable EXYNOS5250 SoC support
 
+config SOC_EXYNOS5420
+	bool "SAMSUNG EXYNOS5420"
+	default y
+	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
+	select S5P_PM if PM
+	select S5P_SLEEP if PM
+	help
+	  Enable EXYNOS5420 SoC support
+
 config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 81e6320ca09..2c655db4b78 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -53,6 +53,7 @@ static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
 static const char name_exynos4412[] = "EXYNOS4412";
 static const char name_exynos5250[] = "EXYNOS5250";
+static const char name_exynos5420[] = "EXYNOS5420";
 static const char name_exynos5440[] = "EXYNOS5440";
 
 static void exynos4_map_io(void);
@@ -86,6 +87,12 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	}, {
+		.idcode		= EXYNOS5420_SOC_ID,
+		.idmask		= EXYNOS5_SOC_MASK,
+		.map_io		= exynos5_map_io,
+		.init		= exynos_init,
+		.name		= name_exynos5420,
+	}, {
 		.idcode		= EXYNOS5440_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5440_map_io,
@@ -289,10 +296,10 @@ void exynos5_restart(char mode, const char *cmd)
 	u32 val;
 	void __iomem *addr;
 
-	if (of_machine_is_compatible("samsung,exynos5250")) {
-		val = 0x1;
-		addr = EXYNOS_SWRESET;
-	} else if (of_machine_is_compatible("samsung,exynos5440")) {
+	val = 0x1;
+	addr = EXYNOS_SWRESET;
+
+	if (of_machine_is_compatible("samsung,exynos5440")) {
 		u32 status;
 		np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
 
@@ -303,9 +310,6 @@ void exynos5_restart(char mode, const char *cmd)
 		val = __raw_readl(addr);
 
 		val = (val & 0xffff0000) | (status & 0xffff);
-	} else {
-		pr_err("%s: cannot support non-DT\n", __func__);
-		return;
 	}
 
 	__raw_writel(val, addr);
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index d405762be18..5d7ce36be46 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -28,13 +28,12 @@ static void arch_detect_cpu(void)
 
 	/*
 	 * product_id is bits 31:12
-	 *    bits 23:20 describe the exynosX family
-	 *
+	 * bits 23:20 describe the exynosX family
+	 * bits 27:24 describe the exynosX family in exynos5420
 	 */
 	chip_id >>= 20;
-	chip_id &= 0xf;
 
-	if (chip_id == 0x5)
+	if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
 		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 	else
 		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index d5c8afdeaa3..f874b773ca1 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -52,6 +52,7 @@ static void __init exynos5_dt_machine_init(void)
 
 static char const *exynos5_dt_compat[] __initdata = {
 	"samsung,exynos5250",
+	"samsung,exynos5420",
 	"samsung,exynos5440",
 	NULL
 };
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index d9c6d0ab6a0..deba1308ff1 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -50,6 +50,8 @@ static inline void __iomem *cpu_boot_reg(int cpu)
 	boot_reg = cpu_boot_reg_base();
 	if (soc_is_exynos4412())
 		boot_reg += 4*cpu;
+	else if (soc_is_exynos5420())
+		boot_reg += 4;
 	return boot_reg;
 }
 
@@ -180,10 +182,14 @@ static void __init exynos_smp_init_cpus(void)
 	void __iomem *scu_base = scu_base_addr();
 	unsigned int i, ncores;
 
-	if (soc_is_exynos5250())
-		ncores = 2;
-	else
+	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9)
 		ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+	else
+		/*
+		 * CPU Nodes are passed thru DT and set_cpu_possible
+		 * is set by "arm_dt_init_cpu_maps".
+		 */
+		return;
 
 	/* sanity check */
 	if (ncores > nr_cpu_ids) {
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 1a26d04c940..d257ff40e16 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,16 +1,18 @@
 obj-y += io.o timer.o
 obj-y += clock.o
-obj-$(CONFIG_DEBUG_FS) += clock-debug.o
 
 obj-$(CONFIG_MSM_VIC) += irq-vic.o
 obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
 
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o
-obj-$(CONFIG_ARCH_MSM7X30) += dma.o
-obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o
+obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
+obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
 
 obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
 
+obj-$(CONFIG_ARCH_MSM7X00A) += dma.o
+obj-$(CONFIG_ARCH_MSM7X30) += dma.o
+obj-$(CONFIG_ARCH_QSD8X50) += dma.o
+
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 82eaf88d202..803651ad4f6 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -59,6 +59,7 @@ static struct platform_device smc91x_device = {
 };
 
 static struct platform_device *devices[] __initdata = {
+	&msm_clock_7x01a,
 	&msm_device_gpio_7201,
 	&msm_device_uart3,
 	&msm_device_smd,
@@ -91,7 +92,6 @@ static void __init halibut_fixup(struct tag *tags, char **cmdline,
 static void __init halibut_map_io(void)
 {
 	msm_map_common_io();
-	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
 static void __init halibut_init_late(void)
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 520c141acd0..db3d8c0bc8a 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -89,6 +89,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
 };
 
 static struct platform_device *devices[] __initdata = {
+	&msm_clock_7x30,
 	&msm_device_gpio_7x30,
 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
         &msm_device_uart2,
@@ -116,7 +117,6 @@ static void __init msm7x30_init(void)
 static void __init msm7x30_map_io(void)
 {
 	msm_map_msm7x30_io();
-	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
 }
 
 static void __init msm7x30_init_late(void)
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 38a532d6937..f14a73d86bc 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -89,6 +89,7 @@ static struct msm_otg_platform_data msm_otg_pdata = {
 };
 
 static struct platform_device *devices[] __initdata = {
+	&msm_clock_8x50,
 	&msm_device_gpio_8x50,
 	&msm_device_uart3,
 	&msm_device_smd,
@@ -172,7 +173,6 @@ static void __init qsd8x50_init_mmc(void)
 static void __init qsd8x50_map_io(void)
 {
 	msm_map_qsd8x50_io();
-	msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
 }
 
 static void __init qsd8x50_init_irq(void)
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index f9a5db6d2ce..77b0a26f897 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -7,7 +7,6 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
-#include <linux/clk.h>
 #include <linux/err.h>
 
 #include <asm/io.h>
@@ -19,6 +18,7 @@
 
 #include "board-trout.h"
 #include "proc_comm.h"
+#include "clock-pcom.h"
 #include "devices.h"
 
 #define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
@@ -170,7 +170,6 @@ static struct mddi_table mddi_toshiba_init_table[] = {
 #define INTMASK_VWAKEOUT (1U << 0)
 
 
-static struct clk *gp_clk;
 static int trout_new_backlight = 1;
 static struct vreg *vreg_mddi_1v5;
 static struct vreg *vreg_lcm_2v85;
@@ -273,18 +272,14 @@ int __init trout_init_panel(void)
 	} else {
 		uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
 						GPIO_NO_PULL, GPIO_8MA);
+		uint32_t id = P_GP_CLK;
+		uint32_t rate = 19200000;
+
 		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
 
-		gp_clk = clk_get(NULL, "gp_clk");
-		if (IS_ERR(gp_clk)) {
-			printk(KERN_ERR "trout_init_panel: could not get gp"
-			       "clock\n");
-			gp_clk = NULL;
-		}
-		rc = clk_set_rate(gp_clk, 19200000);
-		if (rc)
-			printk(KERN_ERR "trout_init_panel: set clock rate "
-			       "failed\n");
+		msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
+		if (id < 0)
+			pr_err("trout_init_panel: set clock rate failed\n");
 	}
 
 	rc = platform_device_register(&msm_device_mdp);
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 80fe1c5ff5c..64a46eb4fc4 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -36,6 +36,7 @@
 extern int trout_init_mmc(unsigned int);
 
 static struct platform_device *devices[] __initdata = {
+	&msm_clock_7x01a,
 	&msm_device_gpio_7201,
 	&msm_device_uart3,
 	&msm_device_smd,
@@ -94,8 +95,6 @@ static void __init trout_map_io(void)
 	/* route UART3 to the "H2W" extended usb connector */
 	writeb(0x80, TROUT_CPLD_BASE + 0x00);
 #endif
-
-	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
 static void __init trout_init_late(void)
diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h
deleted file mode 100644
index 14104453688..00000000000
--- a/arch/arm/mach-msm/clock-7x30.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
-
-enum {
-	L_7X30_NONE_CLK = -1,
-	L_7X30_ADM_CLK,
-	L_7X30_I2C_CLK,
-	L_7X30_I2C_2_CLK,
-	L_7X30_QUP_I2C_CLK,
-	L_7X30_UART1DM_CLK,
-	L_7X30_UART1DM_P_CLK,
-	L_7X30_UART2DM_CLK,
-	L_7X30_UART2DM_P_CLK,
-	L_7X30_EMDH_CLK,
-	L_7X30_EMDH_P_CLK,
-	L_7X30_PMDH_CLK,
-	L_7X30_PMDH_P_CLK,
-	L_7X30_GRP_2D_CLK,
-	L_7X30_GRP_2D_P_CLK,
-	L_7X30_GRP_3D_SRC_CLK,
-	L_7X30_GRP_3D_CLK,
-	L_7X30_GRP_3D_P_CLK,
-	L_7X30_IMEM_CLK,
-	L_7X30_SDC1_CLK,
-	L_7X30_SDC1_P_CLK,
-	L_7X30_SDC2_CLK,
-	L_7X30_SDC2_P_CLK,
-	L_7X30_SDC3_CLK,
-	L_7X30_SDC3_P_CLK,
-	L_7X30_SDC4_CLK,
-	L_7X30_SDC4_P_CLK,
-	L_7X30_MDP_CLK,
-	L_7X30_MDP_P_CLK,
-	L_7X30_MDP_LCDC_PCLK_CLK,
-	L_7X30_MDP_LCDC_PAD_PCLK_CLK,
-	L_7X30_MDP_VSYNC_CLK,
-	L_7X30_MI2S_CODEC_RX_M_CLK,
-	L_7X30_MI2S_CODEC_RX_S_CLK,
-	L_7X30_MI2S_CODEC_TX_M_CLK,
-	L_7X30_MI2S_CODEC_TX_S_CLK,
-	L_7X30_MI2S_M_CLK,
-	L_7X30_MI2S_S_CLK,
-	L_7X30_LPA_CODEC_CLK,
-	L_7X30_LPA_CORE_CLK,
-	L_7X30_LPA_P_CLK,
-	L_7X30_MIDI_CLK,
-	L_7X30_MDC_CLK,
-	L_7X30_ROTATOR_IMEM_CLK,
-	L_7X30_ROTATOR_P_CLK,
-	L_7X30_SDAC_M_CLK,
-	L_7X30_SDAC_CLK,
-	L_7X30_UART1_CLK,
-	L_7X30_UART2_CLK,
-	L_7X30_UART3_CLK,
-	L_7X30_TV_CLK,
-	L_7X30_TV_DAC_CLK,
-	L_7X30_TV_ENC_CLK,
-	L_7X30_HDMI_CLK,
-	L_7X30_TSIF_REF_CLK,
-	L_7X30_TSIF_P_CLK,
-	L_7X30_USB_HS_SRC_CLK,
-	L_7X30_USB_HS_CLK,
-	L_7X30_USB_HS_CORE_CLK,
-	L_7X30_USB_HS_P_CLK,
-	L_7X30_USB_HS2_CLK,
-	L_7X30_USB_HS2_CORE_CLK,
-	L_7X30_USB_HS2_P_CLK,
-	L_7X30_USB_HS3_CLK,
-	L_7X30_USB_HS3_CORE_CLK,
-	L_7X30_USB_HS3_P_CLK,
-	L_7X30_VFE_CLK,
-	L_7X30_VFE_P_CLK,
-	L_7X30_VFE_MDC_CLK,
-	L_7X30_VFE_CAMIF_CLK,
-	L_7X30_CAMIF_PAD_P_CLK,
-	L_7X30_CAM_M_CLK,
-	L_7X30_JPEG_CLK,
-	L_7X30_JPEG_P_CLK,
-	L_7X30_VPE_CLK,
-	L_7X30_MFC_CLK,
-	L_7X30_MFC_DIV2_CLK,
-	L_7X30_MFC_P_CLK,
-	L_7X30_SPI_CLK,
-	L_7X30_SPI_P_CLK,
-	L_7X30_CSI0_CLK,
-	L_7X30_CSI0_VFE_CLK,
-	L_7X30_CSI0_P_CLK,
-	L_7X30_CSI1_CLK,
-	L_7X30_CSI1_VFE_CLK,
-	L_7X30_CSI1_P_CLK,
-	L_7X30_GLBL_ROOT_CLK,
-
-	L_7X30_AXI_LI_VG_CLK,
-	L_7X30_AXI_LI_GRP_CLK,
-	L_7X30_AXI_LI_JPEG_CLK,
-	L_7X30_AXI_GRP_2D_CLK,
-	L_7X30_AXI_MFC_CLK,
-	L_7X30_AXI_VPE_CLK,
-	L_7X30_AXI_LI_VFE_CLK,
-	L_7X30_AXI_LI_APPS_CLK,
-	L_7X30_AXI_MDP_CLK,
-	L_7X30_AXI_IMEM_CLK,
-	L_7X30_AXI_LI_ADSP_A_CLK,
-	L_7X30_AXI_ROTATOR_CLK,
-
-	L_7X30_NR_CLKS
-};
-
-struct clk_ops;
-extern struct clk_ops clk_ops_7x30;
-
-struct clk_ops *clk_7x30_is_local(uint32_t id);
-int clk_7x30_init(void);
-
-void pll_enable(uint32_t pll);
-void pll_disable(uint32_t pll);
-
-extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable);
-
-#define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = L_7X30_##clk_id, \
-		.remote_id = P_##clk_id, \
-		.flags = clk_flags, \
-		.dbg_name = #clk_id, \
-	}, \
-	}
-
-#define CLK_7X30S(clk_name, l_id, r_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = L_7X30_##l_id, \
-		.remote_id = P_##r_id, \
-		.flags = clk_flags, \
-		.dbg_name = #l_id, \
-		.ops = &clk_ops_pcom, \
-	}, \
-	}
-
-#endif
diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c
deleted file mode 100644
index b0fbdf1cbdd..00000000000
--- a/arch/arm/mach-msm/clock-debug.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ctype.h>
-#include <linux/debugfs.h>
-#include <linux/clk.h>
-#include "clock.h"
-
-static int clock_debug_rate_set(void *data, u64 val)
-{
-	struct clk *clock = data;
-	int ret;
-
-	/* Only increases to max rate will succeed, but that's actually good
-	 * for debugging purposes so we don't check for error. */
-	if (clock->flags & CLK_MAX)
-		clk_set_max_rate(clock, val);
-	if (clock->flags & CLK_MIN)
-		ret = clk_set_min_rate(clock, val);
-	else
-		ret = clk_set_rate(clock, val);
-	if (ret != 0)
-		printk(KERN_ERR "clk_set%s_rate failed (%d)\n",
-			(clock->flags & CLK_MIN) ? "_min" : "", ret);
-	return ret;
-}
-
-static int clock_debug_rate_get(void *data, u64 *val)
-{
-	struct clk *clock = data;
-	*val = clk_get_rate(clock);
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_debug_rate_get,
-			clock_debug_rate_set, "%llu\n");
-
-static int clock_debug_enable_set(void *data, u64 val)
-{
-	struct clk *clock = data;
-	int rc = 0;
-
-	if (val)
-		rc = clock->ops->enable(clock->id);
-	else
-		clock->ops->disable(clock->id);
-
-	return rc;
-}
-
-static int clock_debug_enable_get(void *data, u64 *val)
-{
-	struct clk *clock = data;
-
-	*val = clock->ops->is_enabled(clock->id);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(clock_enable_fops, clock_debug_enable_get,
-			clock_debug_enable_set, "%llu\n");
-
-static int clock_debug_local_get(void *data, u64 *val)
-{
-	struct clk *clock = data;
-
-	*val = clock->ops->is_local(clock->id);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get,
-			NULL, "%llu\n");
-
-static struct dentry *debugfs_base;
-
-int __init clock_debug_init(void)
-{
-	debugfs_base = debugfs_create_dir("clk", NULL);
-	if (!debugfs_base)
-		return -ENOMEM;
-	return 0;
-}
-
-int __init clock_debug_add(struct clk *clock)
-{
-	char temp[50], *ptr;
-	struct dentry *clk_dir;
-
-	if (!debugfs_base)
-		return -ENOMEM;
-
-	strlcpy(temp, clock->dbg_name, ARRAY_SIZE(temp));
-	for (ptr = temp; *ptr; ptr++)
-		*ptr = tolower(*ptr);
-
-	clk_dir = debugfs_create_dir(temp, debugfs_base);
-	if (!clk_dir)
-		return -ENOMEM;
-
-	if (!debugfs_create_file("rate", S_IRUGO | S_IWUSR, clk_dir,
-				clock, &clock_rate_fops))
-		goto error;
-
-	if (!debugfs_create_file("enable", S_IRUGO | S_IWUSR, clk_dir,
-				clock, &clock_enable_fops))
-		goto error;
-
-	if (!debugfs_create_file("is_local", S_IRUGO, clk_dir, clock,
-				&clock_local_fops))
-		goto error;
-	return 0;
-error:
-	debugfs_remove_recursive(clk_dir);
-	return -ENOMEM;
-}
diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c
index a52c970df15..9a80449518e 100644
--- a/arch/arm/mach-msm/clock-pcom.c
+++ b/arch/arm/mach-msm/clock-pcom.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -13,20 +13,33 @@
  *
  */
 
+#include <linux/kernel.h>
 #include <linux/err.h>
-#include <linux/ctype.h>
-#include <linux/stddef.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
 #include <mach/clk.h>
 
 #include "proc_comm.h"
 #include "clock.h"
 #include "clock-pcom.h"
 
-/*
- * glue for the proc_comm interface
- */
-static int pc_clk_enable(unsigned id)
+struct clk_pcom {
+	unsigned id;
+	unsigned long flags;
+	struct msm_clk msm_clk;
+};
+
+static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw)
 {
+	return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk);
+}
+
+static int pc_clk_enable(struct clk_hw *hw)
+{
+	unsigned id = to_clk_pcom(hw)->id;
 	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
 	if (rc < 0)
 		return rc;
@@ -34,14 +47,16 @@ static int pc_clk_enable(unsigned id)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-static void pc_clk_disable(unsigned id)
+static void pc_clk_disable(struct clk_hw *hw)
 {
+	unsigned id = to_clk_pcom(hw)->id;
 	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
 }
 
-int pc_clk_reset(unsigned id, enum clk_reset_action action)
+static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action)
 {
 	int rc;
+	unsigned id = to_clk_pcom(hw)->id;
 
 	if (action == CLK_RESET_ASSERT)
 		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
@@ -54,85 +69,109 @@ int pc_clk_reset(unsigned id, enum clk_reset_action action)
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-static int pc_clk_set_rate(unsigned id, unsigned rate)
+static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate,
+			   unsigned long p_rate)
 {
-	/* The rate _might_ be rounded off to the nearest KHz value by the
+	struct clk_pcom *p = to_clk_pcom(hw);
+	unsigned id = p->id, rate = new_rate;
+	int rc;
+
+	/*
+	 * The rate _might_ be rounded off to the nearest KHz value by the
 	 * remote function. So a return value of 0 doesn't necessarily mean
 	 * that the exact rate was set successfully.
 	 */
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-static int pc_clk_set_min_rate(unsigned id, unsigned rate)
-{
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-static int pc_clk_set_max_rate(unsigned id, unsigned rate)
-{
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
-	if (rc < 0)
-		return rc;
+	if (p->flags & CLKFLAG_MIN)
+		rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
 	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-static int pc_clk_set_flags(unsigned id, unsigned flags)
-{
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
+		rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
 	if (rc < 0)
 		return rc;
 	else
 		return (int)id < 0 ? -EINVAL : 0;
 }
 
-static unsigned pc_clk_get_rate(unsigned id)
+static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate)
 {
+	unsigned id = to_clk_pcom(hw)->id;
 	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
 		return 0;
 	else
 		return id;
 }
 
-static unsigned pc_clk_is_enabled(unsigned id)
+static int pc_clk_is_enabled(struct clk_hw *hw)
 {
+	unsigned id = to_clk_pcom(hw)->id;
 	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
 		return 0;
 	else
 		return id;
 }
 
-static long pc_clk_round_rate(unsigned id, unsigned rate)
+static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *p_rate)
 {
-
 	/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
 	return rate;
 }
 
-static bool pc_clk_is_local(unsigned id)
-{
-	return false;
-}
-
-struct clk_ops clk_ops_pcom = {
+static struct clk_ops clk_ops_pcom = {
 	.enable = pc_clk_enable,
 	.disable = pc_clk_disable,
-	.auto_off = pc_clk_disable,
-	.reset = pc_clk_reset,
 	.set_rate = pc_clk_set_rate,
-	.set_min_rate = pc_clk_set_min_rate,
-	.set_max_rate = pc_clk_set_max_rate,
-	.set_flags = pc_clk_set_flags,
-	.get_rate = pc_clk_get_rate,
+	.recalc_rate = pc_clk_recalc_rate,
 	.is_enabled = pc_clk_is_enabled,
 	.round_rate = pc_clk_round_rate,
-	.is_local = pc_clk_is_local,
 };
+
+static int msm_clock_pcom_probe(struct platform_device *pdev)
+{
+	const struct pcom_clk_pdata *pdata = pdev->dev.platform_data;
+	int i, ret;
+
+	for (i = 0; i < pdata->num_lookups; i++) {
+		const struct clk_pcom_desc *desc = &pdata->lookup[i];
+		struct clk *c;
+		struct clk_pcom *p;
+		struct clk_hw *hw;
+		struct clk_init_data init;
+
+		p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+		if (!p)
+			return -ENOMEM;
+
+		p->id = desc->id;
+		p->flags = desc->flags;
+		p->msm_clk.reset = pc_clk_reset;
+
+		hw = &p->msm_clk.hw;
+		hw->init = &init;
+
+		init.name = desc->name;
+		init.ops = &clk_ops_pcom;
+		init.num_parents = 0;
+		init.flags = CLK_IS_ROOT;
+
+		if (!(p->flags & CLKFLAG_AUTO_OFF))
+			init.flags |= CLK_IGNORE_UNUSED;
+
+		c = devm_clk_register(&pdev->dev, hw);
+		ret = clk_register_clkdev(c, desc->con, desc->dev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver msm_clock_pcom_driver = {
+	.probe		= msm_clock_pcom_probe,
+	.driver		= {
+		.name	= "msm-clock-pcom",
+		.owner	= THIS_MODULE,
+	},
+};
+module_platform_driver(msm_clock_pcom_driver);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h
index 974d0032f3a..5bb164fd46a 100644
--- a/arch/arm/mach-msm/clock-pcom.h
+++ b/arch/arm/mach-msm/clock-pcom.h
@@ -1,4 +1,5 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+/*
+ * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -120,21 +121,25 @@
 
 #define P_NR_CLKS		102
 
-struct clk_ops;
-extern struct clk_ops clk_ops_pcom;
+struct clk_pcom_desc {
+	unsigned id;
+	const char *name;
+	const char *con;
+	const char *dev;
+	unsigned long flags;
+};
 
-int pc_clk_reset(unsigned id, enum clk_reset_action action);
+struct pcom_clk_pdata {
+	struct clk_pcom_desc *lookup;
+	u32 num_lookups;
+};
 
 #define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = P_##clk_id, \
-		.remote_id = P_##clk_id, \
-		.ops = &clk_ops_pcom, \
-		.flags = clk_flags, \
-		.dbg_name = #clk_id, \
-	}, \
+	.id = P_##clk_id,					\
+	.name = #clk_id,					\
+	.con = clk_name,					\
+	.dev = clk_dev,						\
+	.flags = clk_flags,					\
 	}
 
 #endif
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
index d9145dfc2a3..35ea02b5248 100644
--- a/arch/arm/mach-msm/clock.c
+++ b/arch/arm/mach-msm/clock.c
@@ -1,7 +1,7 @@
 /* arch/arm/mach-msm/clock.c
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -14,171 +14,15 @@
  *
  */
 
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/spinlock.h>
-#include <linux/pm_qos.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/string.h>
+#include <linux/clk-provider.h>
 #include <linux/module.h>
-#include <linux/clkdev.h>
 
 #include "clock.h"
 
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(clocks);
-
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&clocks_lock, flags);
-	clk->count++;
-	if (clk->count == 1)
-		clk->ops->enable(clk->id);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&clocks_lock, flags);
-	BUG_ON(clk->count == 0);
-	clk->count--;
-	if (clk->count == 0)
-		clk->ops->disable(clk->id);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
 int clk_reset(struct clk *clk, enum clk_reset_action action)
 {
-	return clk->ops->reset(clk->remote_id, action);
+	struct clk_hw *hw = __clk_get_hw(clk);
+	struct msm_clk *m = to_msm_clk(hw);
+	return m->reset(hw, action);
 }
 EXPORT_SYMBOL(clk_reset);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->ops->get_rate(clk->id);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-	if (clk->flags & CLKFLAG_MAX) {
-		ret = clk->ops->set_max_rate(clk->id, rate);
-		if (ret)
-			return ret;
-	}
-	if (clk->flags & CLKFLAG_MIN) {
-		ret = clk->ops->set_min_rate(clk->id, rate);
-		if (ret)
-			return ret;
-	}
-
-	if (clk->flags & CLKFLAG_MAX || clk->flags & CLKFLAG_MIN)
-		return ret;
-
-	return clk->ops->set_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->ops->round_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_min_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->ops->set_min_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_set_min_rate);
-
-int clk_set_max_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->ops->set_max_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_set_max_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return ERR_PTR(-ENOSYS);
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_flags(struct clk *clk, unsigned long flags)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-	return clk->ops->set_flags(clk->id, flags);
-}
-EXPORT_SYMBOL(clk_set_flags);
-
-/* EBI1 is the only shared clock that several clients want to vote on as of
- * this commit. If this changes in the future, then it might be better to
- * make clk_min_rate handle the voting or make ebi1_clk_set_min_rate more
- * generic to support different clocks.
- */
-static struct clk *ebi1_clk;
-
-void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks)
-{
-	unsigned n;
-
-	mutex_lock(&clocks_mutex);
-	for (n = 0; n < num_clocks; n++) {
-		clkdev_add(&clock_tbl[n]);
-		list_add_tail(&clock_tbl[n].clk->list, &clocks);
-	}
-	mutex_unlock(&clocks_mutex);
-
-	ebi1_clk = clk_get(NULL, "ebi1_clk");
-	BUG_ON(ebi1_clk == NULL);
-
-}
-
-/* The bootloader and/or AMSS may have left various clocks enabled.
- * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have
- * not been explicitly enabled by a clk_enable() call.
- */
-static int __init clock_late_init(void)
-{
-	unsigned long flags;
-	struct clk *clk;
-	unsigned count = 0;
-
-	clock_debug_init();
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(clk, &clocks, list) {
-		clock_debug_add(clk);
-		if (clk->flags & CLKFLAG_AUTO_OFF) {
-			spin_lock_irqsave(&clocks_lock, flags);
-			if (!clk->count) {
-				count++;
-				clk->ops->auto_off(clk->id);
-			}
-			spin_unlock_irqrestore(&clocks_lock, flags);
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-	pr_info("clock_late_init() disabled %d unused clocks\n", count);
-	return 0;
-}
-
-late_initcall(clock_late_init);
-
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
index 2c007f606d2..42d29dd7aaf 100644
--- a/arch/arm/mach-msm/clock.h
+++ b/arch/arm/mach-msm/clock.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-msm/clock.h
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -17,56 +17,27 @@
 #ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
 #define __ARCH_ARM_MACH_MSM_CLOCK_H
 
-#include <linux/init.h>
-#include <linux/list.h>
+#include <linux/clk-provider.h>
 #include <mach/clk.h>
 
-#define CLKFLAG_INVERT			0x00000001
-#define CLKFLAG_NOINVERT		0x00000002
-#define CLKFLAG_NONEST			0x00000004
-#define CLKFLAG_NORESET			0x00000008
-
 #define CLK_FIRST_AVAILABLE_FLAG	0x00000100
 #define CLKFLAG_AUTO_OFF		0x00000200
 #define CLKFLAG_MIN			0x00000400
 #define CLKFLAG_MAX			0x00000800
 
-struct clk_ops {
-	int (*enable)(unsigned id);
-	void (*disable)(unsigned id);
-	void (*auto_off)(unsigned id);
-	int (*reset)(unsigned id, enum clk_reset_action action);
-	int (*set_rate)(unsigned id, unsigned rate);
-	int (*set_min_rate)(unsigned id, unsigned rate);
-	int (*set_max_rate)(unsigned id, unsigned rate);
-	int (*set_flags)(unsigned id, unsigned flags);
-	unsigned (*get_rate)(unsigned id);
-	unsigned (*is_enabled)(unsigned id);
-	long (*round_rate)(unsigned id, unsigned rate);
-	bool (*is_local)(unsigned id);
-};
-
-struct clk {
-	uint32_t id;
-	uint32_t remote_id;
-	uint32_t count;
-	uint32_t flags;
-	struct clk_ops *ops;
-	const char *dbg_name;
-	struct list_head list;
-};
-
 #define OFF CLKFLAG_AUTO_OFF
 #define CLK_MIN CLKFLAG_MIN
 #define CLK_MAX CLKFLAG_MAX
 #define CLK_MINMAX (CLK_MIN | CLK_MAX)
 
-#ifdef CONFIG_DEBUG_FS
-int __init clock_debug_init(void);
-int __init clock_debug_add(struct clk *clock);
-#else
-static inline int __init clock_debug_init(void) { return 0; }
-static inline int __init clock_debug_add(struct clk *clock) { return 0; }
-#endif
+struct msm_clk {
+	int (*reset)(struct clk_hw *hw, enum clk_reset_action action);
+	struct clk_hw hw;
+};
+
+static inline struct msm_clk *to_msm_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct msm_clk, hw);
+}
 
 #endif
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index 1a0a2306b11..6d50fb96486 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -425,7 +425,7 @@ struct platform_device msm_device_mdp = {
 	.resource = resources_mdp,
 };
 
-struct clk_lookup msm_clocks_7x01a[] = {
+static struct clk_pcom_desc msm_clocks_7x01a[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
 	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, 0),
@@ -469,4 +469,12 @@ struct clk_lookup msm_clocks_7x01a[] = {
 	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
 };
 
-unsigned msm_num_clocks_7x01a = ARRAY_SIZE(msm_clocks_7x01a);
+static struct pcom_clk_pdata msm_clock_7x01a_pdata = {
+	.lookup = msm_clocks_7x01a,
+	.num_lookups = ARRAY_SIZE(msm_clocks_7x01a),
+};
+
+struct platform_device msm_clock_7x01a = {
+	.name = "msm-clock-pcom",
+	.dev.platform_data = &msm_clock_7x01a_pdata,
+};
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index 12f482c0774..d4db75acff5 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -28,8 +28,8 @@
 
 #include <asm/mach/flash.h>
 
+#include "clock.h"
 #include "clock-pcom.h"
-#include "clock-7x30.h"
 
 #include <linux/platform_data/mmc-msm_sdcc.h>
 
@@ -161,7 +161,7 @@ struct platform_device msm_device_hsusb_host = {
 	},
 };
 
-struct clk_lookup msm_clocks_7x30[] = {
+static struct clk_pcom_desc msm_clocks_7x30[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
 	CLK_PCOM("cam_m_clk",	CAM_M_CLK,	NULL, 0),
@@ -177,7 +177,6 @@ struct clk_lookup msm_clocks_7x30[] = {
 	CLK_PCOM("grp_2d_pclk",	GRP_2D_P_CLK,	NULL, 0),
 	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
 	CLK_PCOM("grp_pclk",	GRP_3D_P_CLK,	NULL, 0),
-	CLK_7X30S("grp_src_clk", GRP_3D_SRC_CLK, GRP_3D_CLK,	NULL, 0),
 	CLK_PCOM("hdmi_clk",	HDMI_CLK,	NULL, 0),
 	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
 	CLK_PCOM("jpeg_clk",	JPEG_CLK,	NULL, OFF),
@@ -210,7 +209,6 @@ struct clk_lookup msm_clocks_7x30[] = {
 	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
 	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
 	CLK_PCOM("spi_pclk",	SPI_P_CLK,	NULL, 0),
-	CLK_7X30S("tv_src_clk",	TV_CLK, 	TV_ENC_CLK,	NULL, 0),
 	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
 	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
 	CLK_PCOM("uart_clk",	UART2_CLK,	"msm_serial.1", 0),
@@ -237,5 +235,12 @@ struct clk_lookup msm_clocks_7x30[] = {
 	CLK_PCOM("csi_vfe_clk",	CSI0_VFE_CLK,	NULL, 0),
 };
 
-unsigned msm_num_clocks_7x30 = ARRAY_SIZE(msm_clocks_7x30);
+static struct pcom_clk_pdata msm_clock_7x30_pdata = {
+	.lookup = msm_clocks_7x30,
+	.num_lookups = ARRAY_SIZE(msm_clocks_7x30),
+};
 
+struct platform_device msm_clock_7x30 = {
+	.name = "msm-clock-pcom",
+	.dev.platform_data = &msm_clock_7x30_pdata,
+};
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 2e1b3ec9dfc..f5518112284 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -28,6 +28,7 @@
 #include <asm/mach/flash.h>
 
 #include <linux/platform_data/mmc-msm_sdcc.h>
+#include "clock.h"
 #include "clock-pcom.h"
 
 static struct resource msm_gpio_resources[] = {
@@ -322,7 +323,7 @@ int __init msm_add_sdcc(unsigned int controller,
 	return platform_device_register(pdev);
 }
 
-struct clk_lookup msm_clocks_8x50[] = {
+static struct clk_pcom_desc msm_clocks_8x50[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("ce_clk",	CE_CLK,		NULL, 0),
 	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
@@ -376,5 +377,12 @@ struct clk_lookup msm_clocks_8x50[] = {
 	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
 };
 
-unsigned msm_num_clocks_8x50 = ARRAY_SIZE(msm_clocks_8x50);
+static struct pcom_clk_pdata msm_clock_8x50_pdata = {
+	.lookup = msm_clocks_8x50,
+	.num_lookups = ARRAY_SIZE(msm_clocks_8x50),
+};
 
+struct platform_device msm_clock_8x50 = {
+	.name = "msm-clock-pcom",
+	.dev.platform_data = &msm_clock_8x50_pdata,
+};
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
index da902cf5116..dccefad9f9b 100644
--- a/arch/arm/mach-msm/devices.h
+++ b/arch/arm/mach-msm/devices.h
@@ -16,10 +16,6 @@
 #ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
 #define __ARCH_ARM_MACH_MSM_DEVICES_H
 
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
 extern struct platform_device msm_device_gpio_7201;
 extern struct platform_device msm_device_gpio_7x30;
 extern struct platform_device msm_device_gpio_8x50;
@@ -50,13 +46,8 @@ extern struct platform_device msm_device_mddi0;
 extern struct platform_device msm_device_mddi1;
 extern struct platform_device msm_device_mdp;
 
-extern struct clk_lookup msm_clocks_7x01a[];
-extern unsigned msm_num_clocks_7x01a;
-
-extern struct clk_lookup msm_clocks_7x30[];
-extern unsigned msm_num_clocks_7x30;
-
-extern struct clk_lookup msm_clocks_8x50[];
-extern unsigned msm_num_clocks_8x50;
+extern struct platform_device msm_clock_7x01a;
+extern struct platform_device msm_clock_7x30;
+extern struct platform_device msm_clock_8x50;
 
 #endif
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index b279fd8a31b..f8f6adfa07c 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -284,6 +284,7 @@ static int __init msm_init_datamover(void)
 	clk = clk_get(NULL, "adm_clk");
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
+	clk_prepare(clk);
 	msm_dmov_clk = clk;
 	ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
 	if (ret)
@@ -291,6 +292,4 @@ static int __init msm_init_datamover(void)
 	disable_irq(INT_ADM_AARM);
 	return 0;
 }
-
-arch_initcall(msm_init_datamover);
-
+module_init(msm_init_datamover);
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index 8cebedb1123..c34e246a3e0 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -20,16 +20,11 @@
 #include <linux/types.h>
 #include <linux/platform_data/mmc-msm_sdcc.h>
 
-/* platform device data structures */
-
-struct clk_lookup;
-
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 
 void __init msm_add_devices(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
-void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks);
 int __init msm_add_sdcc(unsigned int controller,
 			struct msm_mmc_platform_data *plat,
 			unsigned int stat_irq, unsigned long stat_irq_flags);
diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h
index e8d38428d81..fd4f4a7a83b 100644
--- a/arch/arm/mach-msm/include/mach/clk.h
+++ b/arch/arm/mach-msm/include/mach/clk.h
@@ -25,16 +25,7 @@ enum clk_reset_action {
 
 struct clk;
 
-/* Rate is minimum clock rate in Hz */
-int clk_set_min_rate(struct clk *clk, unsigned long rate);
-
-/* Rate is maximum clock rate in Hz */
-int clk_set_max_rate(struct clk *clk, unsigned long rate);
-
 /* Assert/Deassert reset to a hardware block associated with a clock */
 int clk_reset(struct clk *clk, enum clk_reset_action action);
 
-/* Set clock-specific configuration parameters */
-int clk_set_flags(struct clk *clk, unsigned long flags);
-
 #endif
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
new file mode 100644
index 00000000000..59d8f0a7091
--- /dev/null
+++ b/arch/arm/mach-nspire/Kconfig
@@ -0,0 +1,16 @@
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4_V5
+	depends on MMU
+	select CPU_ARM926T
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select SPARSE_IRQ
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select USE_OF
+	select CLKSRC_OF
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile
new file mode 100644
index 00000000000..1bec256eba0
--- /dev/null
+++ b/arch/arm/mach-nspire/Makefile
@@ -0,0 +1,2 @@
+obj-y				+= nspire.o
+obj-y				+= clcd.o
diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/arch/arm/mach-nspire/Makefile.boot
diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c
new file mode 100644
index 00000000000..abea12617b1
--- /dev/null
+++ b/arch/arm/mach-nspire/clcd.c
@@ -0,0 +1,119 @@
+/*
+ *	linux/arch/arm/mach-nspire/clcd.c
+ *
+ *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/dma-mapping.h>
+
+static struct clcd_panel nspire_cx_lcd_panel = {
+	.mode		= {
+		.name		= "Color LCD",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.pixclock	= 1,
+		.hsync_len	= 6,
+		.vsync_len	= 1,
+		.right_margin	= 50,
+		.left_margin	= 38,
+		.lower_margin	= 3,
+		.upper_margin	= 17,
+	},
+	.width		= 65, /* ~6.50 cm */
+	.height		= 49, /* ~4.87 cm */
+	.tim2		= TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+	.caps		= CLCD_CAP_565,
+};
+
+static struct clcd_panel nspire_classic_lcd_panel = {
+	.mode		= {
+		.name		= "Grayscale LCD",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.pixclock	= 1,
+		.hsync_len	= 6,
+		.vsync_len	= 1,
+		.right_margin	= 6,
+		.left_margin	= 6,
+	},
+	.width		= 71, /* 7.11cm */
+	.height		= 53, /* 5.33cm */
+	.tim2		= 0x80007d0,
+	.cntl		= CNTL_LCDMONO8,
+	.bpp		= 8,
+	.grayscale	= 1,
+	.caps		= CLCD_CAP_5551,
+};
+
+int nspire_clcd_setup(struct clcd_fb *fb)
+{
+	struct clcd_panel *panel;
+	size_t panel_size;
+	const char *type;
+	dma_addr_t dma;
+	int err;
+
+	BUG_ON(!fb->dev->dev.of_node);
+
+	err = of_property_read_string(fb->dev->dev.of_node, "lcd-type", &type);
+	if (err) {
+		pr_err("CLCD: Could not find lcd-type property\n");
+		return err;
+	}
+
+	if (!strcmp(type, "cx")) {
+		panel = &nspire_cx_lcd_panel;
+	} else if (!strcmp(type, "classic")) {
+		panel = &nspire_classic_lcd_panel;
+	} else {
+		pr_err("CLCD: Unknown lcd-type %s\n", type);
+		return -EINVAL;
+	}
+
+	panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8;
+	panel_size = ALIGN(panel_size, PAGE_SIZE);
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
+		panel_size, &dma, GFP_KERNEL);
+
+	if (!fb->fb.screen_base) {
+		pr_err("CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = panel_size;
+	fb->panel = panel;
+
+	return 0;
+}
+
+int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+		fb->fb.screen_base, fb->fb.fix.smem_start,
+		fb->fb.fix.smem_len);
+}
+
+void nspire_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+		fb->fb.screen_base, fb->fb.fix.smem_start);
+}
diff --git a/arch/arm/mach-nspire/clcd.h b/arch/arm/mach-nspire/clcd.h
new file mode 100644
index 00000000000..8c33d2c1837
--- /dev/null
+++ b/arch/arm/mach-nspire/clcd.h
@@ -0,0 +1,14 @@
+/*
+ *	linux/arch/arm/mach-nspire/clcd.h
+ *
+ *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+int nspire_clcd_setup(struct clcd_fb *fb);
+int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
+void nspire_clcd_remove(struct clcd_fb *fb);
diff --git a/arch/arm/mach-nspire/mmio.h b/arch/arm/mach-nspire/mmio.h
new file mode 100644
index 00000000000..8813471af4c
--- /dev/null
+++ b/arch/arm/mach-nspire/mmio.h
@@ -0,0 +1,20 @@
+/*
+ *	linux/arch/arm/mach-nspire/mmio.h
+ *
+ *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define NSPIRE_MISC_PHYS_BASE		0x900A0000
+#define NSPIRE_MISC_HWRESET		0x08
+
+#define NSPIRE_PWR_PHYS_BASE		0x900B0000
+#define NSPIRE_PWR_VIRT_BASE		0xFEEB0000
+#define NSPIRE_PWR_BUS_DISABLE1		0x18
+#define NSPIRE_PWR_BUS_DISABLE2		0x20
+
+#define NSPIRE_LCD_PHYS_BASE		0xC0000000
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
new file mode 100644
index 00000000000..99e26092a9f
--- /dev/null
+++ b/arch/arm/mach-nspire/nspire.c
@@ -0,0 +1,89 @@
+/*
+ *	linux/arch/arm/mach-nspire/nspire.c
+ *
+ *	Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-vic.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/clocksource.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware/timer-sp.h>
+
+#include "mmio.h"
+#include "clcd.h"
+
+static const char *nspire_dt_match[] __initconst = {
+	"ti,nspire",
+	"ti,nspire-cx",
+	"ti,nspire-tp",
+	"ti,nspire-clp",
+	NULL,
+};
+
+static void __init nspire_map_io(void)
+{
+	debug_ll_io_init();
+}
+
+static struct clcd_board nspire_clcd_data = {
+	.name		= "LCD",
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_565,
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.setup		= nspire_clcd_setup,
+	.mmap		= nspire_clcd_mmap,
+	.remove		= nspire_clcd_remove,
+};
+
+
+static struct of_dev_auxdata nspire_auxdata[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl111", NSPIRE_LCD_PHYS_BASE,
+			NULL, &nspire_clcd_data),
+	{ }
+};
+
+static void __init nspire_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+			nspire_auxdata, NULL);
+}
+
+static void __init nspire_init_time(void)
+{
+	of_clk_init(NULL);
+	clocksource_of_init();
+}
+
+static void nspire_restart(char mode, const char *cmd)
+{
+	void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K);
+	if (!base)
+		return;
+
+	writel(2, base + NSPIRE_MISC_HWRESET);
+}
+
+DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
+	.dt_compat	= nspire_dt_match,
+	.map_io		= nspire_map_io,
+	.init_time	= nspire_init_time,
+	.init_machine	= nspire_init,
+	.restart	= nspire_restart,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index b461d93431e..28f94752b8f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -30,17 +30,17 @@
 #include <mach/r8a7790.h>
 #include <asm/mach/arch.h>
 
-static const struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
 };
 
 #define R8A7790_GPIO(idx)						\
-static struct resource r8a7790_gpio##idx##_resources[] = {		\
+static struct resource r8a7790_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
 	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
 };									\
 									\
-static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data = {	\
+static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = {	\
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= 0,						\
 	.number_of_pins	= 32,						\
@@ -98,12 +98,20 @@ void __init r8a7790_pinmux_init(void)
 [index] = {						\
 	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
 	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
 }
 
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
+#define HSCIF_DATA(index, baseaddr, irq)		\
+[index] = {						\
+	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
+	.scbrr_algo_id	= SCBRR_ALGO_6,			\
+	.scscr = SCSCR_RE | SCSCR_TE,	\
+}
+
+enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
+       HSCIF0, HSCIF1 };
 
-static const struct plat_sci_port scif[] = {
+static struct plat_sci_port scif[] __initdata = {
 	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
 	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
 	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
@@ -112,6 +120,8 @@ static const struct plat_sci_port scif[] = {
 	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
 	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
 	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
+	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
+	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
 };
 
 static inline void r8a7790_register_scif(int idx)
@@ -120,11 +130,11 @@ static inline void r8a7790_register_scif(int idx)
 				      sizeof(struct plat_sci_port));
 }
 
-static struct renesas_irqc_config irqc0_data = {
+static struct renesas_irqc_config irqc0_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 };
 
-static struct resource irqc0_resources[] = {
+static struct resource irqc0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
 	DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
 	DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
@@ -149,6 +159,8 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIFA2);
 	r8a7790_register_scif(SCIF0);
 	r8a7790_register_scif(SCIF1);
+	r8a7790_register_scif(HSCIF0);
+	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
 }
 
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
new file mode 100644
index 00000000000..d04e3bfe191
--- /dev/null
+++ b/arch/arm/mach-sti/Kconfig
@@ -0,0 +1,45 @@
+menuconfig ARCH_STI
+	bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
+	select GENERIC_CLOCKEVENTS
+	select CLKDEV_LOOKUP
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select PINCTRL
+	select PINCTRL_ST
+	select MFD_SYSCON
+	select MIGHT_HAVE_CACHE_L2X0
+	select HAVE_SMP
+	select HAVE_ARM_SCU if SMP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_ERRATA_720789
+	select ARM_ERRATA_754322
+	select PL310_ERRATA_753970 if CACHE_PL310
+	select PL310_ERRATA_769419 if CACHE_PL310
+	help
+	  Include support for STiH41x SOCs like STiH415/416 using the device tree
+	  for discovery
+	  More information at Documentation/arm/STiH41x and
+	  at Documentation/devicetree
+
+
+if ARCH_STI
+
+config SOC_STIH415
+	bool "STiH415 STMicroelectronics Consumer Electronics family"
+	default y
+	help
+	  This enables support for STMicroelectronics Digital Consumer
+	  Electronics family StiH415 parts, primarily targetted at set-top-box
+	  and other digital audio/video applications using Flattned Device
+	  Trees.
+
+config SOC_STIH416
+	bool "STiH416 STMicroelectronics Consumer Electronics family"
+	default y
+	help
+	  This enables support for STMicroelectronics Digital Consumer
+	  Electronics family StiH416 parts, primarily targetted at set-top-box
+	  and other digital audio/video applications using Flattened Device
+	  Trees.
+
+endif
diff --git a/arch/arm/mach-sti/Makefile b/arch/arm/mach-sti/Makefile
new file mode 100644
index 00000000000..acb33091633
--- /dev/null
+++ b/arch/arm/mach-sti/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_ARCH_STI) 		+= board-dt.o
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
new file mode 100644
index 00000000000..8fe6f0c4648
--- /dev/null
+++ b/arch/arm/mach-sti/board-dt.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author(s): Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/irq.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+
+#include "smp.h"
+
+void __init stih41x_l2x0_init(void)
+{
+	u32 way_size = 0x4;
+	u32 aux_ctrl;
+	/* may be this can be encoded in macros like BIT*() */
+	aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
+		(0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
+		(0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
+		(way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+
+	l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+}
+
+static void __init stih41x_timer_init(void)
+{
+	of_clk_init(NULL);
+	clocksource_of_init();
+	stih41x_l2x0_init();
+}
+
+static const char *stih41x_dt_match[] __initdata = {
+	"st,stih415",
+	"st,stih416",
+	NULL
+};
+
+DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
+	.init_time	= stih41x_timer_init,
+	.smp		= smp_ops(sti_smp_ops),
+	.dt_compat	= stih41x_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S
new file mode 100644
index 00000000000..78ebc7559f5
--- /dev/null
+++ b/arch/arm/mach-sti/headsmp.S
@@ -0,0 +1,44 @@
+/*
+ *  arch/arm/mach-sti/headsmp.S
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *		http://www.st.com
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * ST specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(sti_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c
new file mode 100644
index 00000000000..977a863468f
--- /dev/null
+++ b/arch/arm/mach-sti/platsmp.c
@@ -0,0 +1,117 @@
+/*
+ *  arch/arm/mach-sti/platsmp.c
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *		http://www.st.com
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#include "smp.h"
+
+static void __cpuinit write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit sti_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit sti_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	write_pen_release(cpu_logical_map(cpu));
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * it to jump to the secondary entrypoint.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+void __init sti_smp_prepare_cpus(unsigned int max_cpus)
+{
+	void __iomem *scu_base = NULL;
+	struct device_node *np = of_find_compatible_node(
+					NULL, NULL, "arm,cortex-a9-scu");
+	if (np) {
+		scu_base = of_iomap(np, 0);
+		scu_enable(scu_base);
+		of_node_put(np);
+	}
+}
+
+struct smp_operations __initdata sti_smp_ops = {
+	.smp_prepare_cpus	= sti_smp_prepare_cpus,
+	.smp_secondary_init	= sti_secondary_init,
+	.smp_boot_secondary	= sti_boot_secondary,
+};
diff --git a/arch/arm/mach-sti/smp.h b/arch/arm/mach-sti/smp.h
new file mode 100644
index 00000000000..1871b72b1a7
--- /dev/null
+++ b/arch/arm/mach-sti/smp.h
@@ -0,0 +1,17 @@
+/*
+ *  arch/arm/mach-sti/smp.h
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *		http://www.st.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_STI_SMP_H
+#define __MACH_STI_SMP_H
+
+extern struct smp_operations	sti_smp_ops;
+
+#endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index f58615b5c60..82ccf1d9873 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -42,7 +42,8 @@ static int __init ux500_l2x0_init(void)
 	if (cpu_is_u8500_family() || cpu_is_ux540_family())
 		l2x0_base = __io_address(U8500_L2CC_BASE);
 	else
-		ux500_unknown_soc();
+		/* Non-Ux500 platform */
+		return -ENODEV;
 
 	/* Unlock before init */
 	ux500_l2x0_unlock();
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 989fefe18be..4fb1f03a10d 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -46,6 +46,7 @@ extern unsigned long samsung_cpu_id;
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
 #define EXYNOS5250_SOC_ID	0x43520000
+#define EXYNOS5420_SOC_ID	0xE5420000
 #define EXYNOS5440_SOC_ID	0xE5440000
 #define EXYNOS5_SOC_MASK	0xFFFFF000
 
@@ -67,6 +68,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
 IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
+IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
 IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
@@ -142,6 +144,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
 # define soc_is_exynos5250()	0
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS5420)
+# define soc_is_exynos5420()	is_samsung_exynos5420()
+#else
+# define soc_is_exynos5420()	0
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS5440)
 # define soc_is_exynos5440()	is_samsung_exynos5440()
 #else
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 187681013bd..5d4d432cc4a 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -5,5 +5,6 @@
 obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
new file mode 100644
index 00000000000..68a96cbd493
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -0,0 +1,762 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Authors: Thomas Abraham <thomas.ab@samsung.com>
+ *	    Chander Kashyap <k.chander@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5420 SoC.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_CPU			0x200
+#define DIV_CPU0		0x500
+#define DIV_CPU1		0x504
+#define GATE_BUS_CPU		0x700
+#define GATE_SCLK_CPU		0x800
+#define SRC_TOP0		0x10200
+#define SRC_TOP1		0x10204
+#define SRC_TOP2		0x10208
+#define SRC_TOP3		0x1020c
+#define SRC_TOP4		0x10210
+#define SRC_TOP5		0x10214
+#define SRC_TOP6		0x10218
+#define SRC_TOP7		0x1021c
+#define SRC_DISP10		0x1022c
+#define SRC_MAU			0x10240
+#define SRC_FSYS		0x10244
+#define SRC_PERIC0		0x10250
+#define SRC_PERIC1		0x10254
+#define SRC_TOP10		0x10280
+#define SRC_TOP11		0x10284
+#define SRC_TOP12		0x10288
+#define	SRC_MASK_DISP10		0x1032c
+#define SRC_MASK_FSYS		0x10340
+#define SRC_MASK_PERIC0		0x10350
+#define SRC_MASK_PERIC1		0x10354
+#define DIV_TOP0		0x10500
+#define DIV_TOP1		0x10504
+#define DIV_TOP2		0x10508
+#define DIV_DISP10		0x1052c
+#define DIV_MAU			0x10544
+#define DIV_FSYS0		0x10548
+#define DIV_FSYS1		0x1054c
+#define DIV_FSYS2		0x10550
+#define DIV_PERIC0		0x10558
+#define DIV_PERIC1		0x1055c
+#define DIV_PERIC2		0x10560
+#define DIV_PERIC3		0x10564
+#define DIV_PERIC4		0x10568
+#define GATE_BUS_TOP		0x10700
+#define GATE_BUS_FSYS0		0x10740
+#define GATE_BUS_PERIC		0x10750
+#define GATE_BUS_PERIC1		0x10754
+#define GATE_BUS_PERIS0		0x10760
+#define GATE_BUS_PERIS1		0x10764
+#define GATE_IP_GSCL0		0x10910
+#define GATE_IP_GSCL1		0x10920
+#define GATE_IP_MFC		0x1092c
+#define GATE_IP_DISP1		0x10928
+#define GATE_IP_G3D		0x10930
+#define GATE_IP_GEN		0x10934
+#define GATE_IP_MSCL		0x10970
+#define GATE_TOP_SCLK_GSCL	0x10820
+#define GATE_TOP_SCLK_DISP1	0x10828
+#define GATE_TOP_SCLK_MAU	0x1083c
+#define GATE_TOP_SCLK_FSYS	0x10840
+#define GATE_TOP_SCLK_PERIC	0x10850
+#define SRC_CDREX		0x20200
+#define SRC_KFC			0x28200
+#define DIV_KFC0		0x28500
+
+enum exynos5420_clks {
+	none,
+
+	/* core clocks */
+	fin_pll,
+
+	/* gate for special clocks (sclk) */
+	sclk_uart0 = 128, sclk_uart1, sclk_uart2, sclk_uart3, sclk_mmc0,
+	sclk_mmc1, sclk_mmc2, sclk_spi0, sclk_spi1, sclk_spi2, sclk_i2s1,
+	sclk_i2s2, sclk_pcm1, sclk_pcm2, sclk_spdif, sclk_hdmi, sclk_pixel,
+	sclk_dp1, sclk_mipi1, sclk_fimd1, sclk_maudio0, sclk_maupcm0,
+	sclk_usbd300, sclk_usbd301, sclk_usbphy300, sclk_usbphy301, sclk_unipro,
+	sclk_pwm, sclk_gscl_wa, sclk_gscl_wb,
+
+	/* gate clocks */
+	aclk66_peric = 256, uart0, uart1, uart2, uart3, i2c0, i2c1, i2c2, i2c3,
+	i2c4, i2c5, i2c6, i2c7, i2c_hdmi, tsadc, spi0, spi1, spi2, keyif, i2s1,
+	i2s2, pcm1, pcm2, pwm, spdif, i2c8, i2c9, i2c10, aclk66_psgen = 300,
+	chipid, sysreg, tzpc0, tzpc1, tzpc2, tzpc3, tzpc4, tzpc5, tzpc6, tzpc7,
+	tzpc8, tzpc9, hdmi_cec, seckey, mct, wdt, rtc, tmu, tmu_gpu,
+	pclk66_gpio = 330, aclk200_fsys2 = 350, mmc0, mmc1, mmc2, sromc, ufs,
+	aclk200_fsys = 360, tsi, pdma0, pdma1, rtic, usbh20, usbd300, usbd301,
+	aclk400_mscl = 380, mscl0, mscl1, mscl2, smmu_mscl0, smmu_mscl1,
+	smmu_mscl2, aclk333 = 400, mfc, smmu_mfcl, smmu_mfcr,
+	aclk200_disp1 = 410, dsim1, dp1, hdmi, aclk300_disp1 = 420, fimd1,
+	smmu_fimd1, aclk166 = 430, mixer, aclk266 = 440, rotator, mdma1,
+	smmu_rotator, smmu_mdma1, aclk300_jpeg = 450, jpeg, jpeg2, smmu_jpeg,
+	aclk300_gscl = 460, smmu_gscl0, smmu_gscl1, gscl_wa, gscl_wb, gscl0,
+	gscl1, clk_3aa, aclk266_g2d = 470, sss, slim_sss, mdma0,
+	aclk333_g2d = 480, g2d, aclk333_432_gscl = 490, smmu_3aa, smmu_fimcl0,
+	smmu_fimcl1, smmu_fimcl3, fimc_lite3, aclk_g3d = 500, g3d,
+
+	nr_clks,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static __initdata unsigned long exynos5420_clk_regs[] = {
+	SRC_CPU,
+	DIV_CPU0,
+	DIV_CPU1,
+	GATE_BUS_CPU,
+	GATE_SCLK_CPU,
+	SRC_TOP0,
+	SRC_TOP1,
+	SRC_TOP2,
+	SRC_TOP3,
+	SRC_TOP4,
+	SRC_TOP5,
+	SRC_TOP6,
+	SRC_TOP7,
+	SRC_DISP10,
+	SRC_MAU,
+	SRC_FSYS,
+	SRC_PERIC0,
+	SRC_PERIC1,
+	SRC_TOP10,
+	SRC_TOP11,
+	SRC_TOP12,
+	SRC_MASK_DISP10,
+	SRC_MASK_FSYS,
+	SRC_MASK_PERIC0,
+	SRC_MASK_PERIC1,
+	DIV_TOP0,
+	DIV_TOP1,
+	DIV_TOP2,
+	DIV_DISP10,
+	DIV_MAU,
+	DIV_FSYS0,
+	DIV_FSYS1,
+	DIV_FSYS2,
+	DIV_PERIC0,
+	DIV_PERIC1,
+	DIV_PERIC2,
+	DIV_PERIC3,
+	DIV_PERIC4,
+	GATE_BUS_TOP,
+	GATE_BUS_FSYS0,
+	GATE_BUS_PERIC,
+	GATE_BUS_PERIC1,
+	GATE_BUS_PERIS0,
+	GATE_BUS_PERIS1,
+	GATE_IP_GSCL0,
+	GATE_IP_GSCL1,
+	GATE_IP_MFC,
+	GATE_IP_DISP1,
+	GATE_IP_G3D,
+	GATE_IP_GEN,
+	GATE_IP_MSCL,
+	GATE_TOP_SCLK_GSCL,
+	GATE_TOP_SCLK_DISP1,
+	GATE_TOP_SCLK_MAU,
+	GATE_TOP_SCLK_FSYS,
+	GATE_TOP_SCLK_PERIC,
+	SRC_CDREX,
+	SRC_KFC,
+	DIV_KFC0,
+};
+
+/* list of all parent clocks */
+PNAME(mspll_cpu_p)	= { "sclk_cpll", "sclk_dpll",
+				"sclk_mpll", "sclk_spll" };
+PNAME(cpu_p)		= { "mout_apll" , "mout_mspll_cpu" };
+PNAME(kfc_p)		= { "mout_kpll" , "mout_mspll_kfc" };
+PNAME(apll_p)		= { "fin_pll", "fout_apll", };
+PNAME(bpll_p)		= { "fin_pll", "fout_bpll", };
+PNAME(cpll_p)		= { "fin_pll", "fout_cpll", };
+PNAME(dpll_p)		= { "fin_pll", "fout_dpll", };
+PNAME(epll_p)		= { "fin_pll", "fout_epll", };
+PNAME(ipll_p)		= { "fin_pll", "fout_ipll", };
+PNAME(kpll_p)		= { "fin_pll", "fout_kpll", };
+PNAME(mpll_p)		= { "fin_pll", "fout_mpll", };
+PNAME(rpll_p)		= { "fin_pll", "fout_rpll", };
+PNAME(spll_p)		= { "fin_pll", "fout_spll", };
+PNAME(vpll_p)		= { "fin_pll", "fout_vpll", };
+
+PNAME(group1_p)		= { "sclk_cpll", "sclk_dpll", "sclk_mpll" };
+PNAME(group2_p)		= { "fin_pll", "sclk_cpll", "sclk_dpll", "sclk_mpll",
+			  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(group3_p)		= { "sclk_rpll", "sclk_spll" };
+PNAME(group4_p)		= { "sclk_ipll", "sclk_dpll", "sclk_mpll" };
+PNAME(group5_p)		= { "sclk_vpll", "sclk_dpll" };
+
+PNAME(sw_aclk66_p)	= { "dout_aclk66", "sclk_spll" };
+PNAME(aclk66_peric_p)	= { "fin_pll", "mout_sw_aclk66" };
+
+PNAME(sw_aclk200_fsys_p) = { "dout_aclk200_fsys", "sclk_spll"};
+PNAME(user_aclk200_fsys_p)	= { "fin_pll", "mout_sw_aclk200_fsys" };
+
+PNAME(sw_aclk200_fsys2_p) = { "dout_aclk200_fsys2", "sclk_spll"};
+PNAME(user_aclk200_fsys2_p)	= { "fin_pll", "mout_sw_aclk200_fsys2" };
+
+PNAME(sw_aclk200_p) = { "dout_aclk200", "sclk_spll"};
+PNAME(aclk200_disp1_p)	= { "fin_pll", "mout_sw_aclk200" };
+
+PNAME(sw_aclk400_mscl_p) = { "dout_aclk400_mscl", "sclk_spll"};
+PNAME(user_aclk400_mscl_p)	= { "fin_pll", "mout_sw_aclk400_mscl" };
+
+PNAME(sw_aclk333_p) = { "dout_aclk333", "sclk_spll"};
+PNAME(user_aclk333_p)	= { "fin_pll", "mout_sw_aclk333" };
+
+PNAME(sw_aclk166_p) = { "dout_aclk166", "sclk_spll"};
+PNAME(user_aclk166_p)	= { "fin_pll", "mout_sw_aclk166" };
+
+PNAME(sw_aclk266_p) = { "dout_aclk266", "sclk_spll"};
+PNAME(user_aclk266_p)	= { "fin_pll", "mout_sw_aclk266" };
+
+PNAME(sw_aclk333_432_gscl_p) = { "dout_aclk333_432_gscl", "sclk_spll"};
+PNAME(user_aclk333_432_gscl_p)	= { "fin_pll", "mout_sw_aclk333_432_gscl" };
+
+PNAME(sw_aclk300_gscl_p) = { "dout_aclk300_gscl", "sclk_spll"};
+PNAME(user_aclk300_gscl_p)	= { "fin_pll", "mout_sw_aclk300_gscl" };
+
+PNAME(sw_aclk300_disp1_p) = { "dout_aclk300_disp1", "sclk_spll"};
+PNAME(user_aclk300_disp1_p)	= { "fin_pll", "mout_sw_aclk300_disp1" };
+
+PNAME(sw_aclk300_jpeg_p) = { "dout_aclk300_jpeg", "sclk_spll"};
+PNAME(user_aclk300_jpeg_p)	= { "fin_pll", "mout_sw_aclk300_jpeg" };
+
+PNAME(sw_aclk_g3d_p) = { "dout_aclk_g3d", "sclk_spll"};
+PNAME(user_aclk_g3d_p)	= { "fin_pll", "mout_sw_aclk_g3d" };
+
+PNAME(sw_aclk266_g2d_p) = { "dout_aclk266_g2d", "sclk_spll"};
+PNAME(user_aclk266_g2d_p)	= { "fin_pll", "mout_sw_aclk266_g2d" };
+
+PNAME(sw_aclk333_g2d_p) = { "dout_aclk333_g2d", "sclk_spll"};
+PNAME(user_aclk333_g2d_p)	= { "fin_pll", "mout_sw_aclk333_g2d" };
+
+PNAME(audio0_p)	= { "fin_pll", "cdclk0", "sclk_dpll", "sclk_mpll",
+		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(audio1_p)	= { "fin_pll", "cdclk1", "sclk_dpll", "sclk_mpll",
+		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(audio2_p)	= { "fin_pll", "cdclk2", "sclk_dpll", "sclk_mpll",
+		  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(spdif_p)	= { "fin_pll", "dout_audio0", "dout_audio1", "dout_audio2",
+		  "spdif_extclk", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+PNAME(hdmi_p)	= { "sclk_hdmiphy", "dout_hdmi_pixel" };
+PNAME(maudio0_p)	= { "fin_pll", "maudio_clk", "sclk_dpll", "sclk_mpll",
+			  "sclk_spll", "sclk_ipll", "sclk_epll", "sclk_rpll" };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos5420_fixed_rate_ext_clks[] __initdata = {
+	FRATE(fin_pll, "fin_pll", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = {
+	FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
+	FRATE(none, "sclk_pwi", NULL, CLK_IS_ROOT, 24000000),
+	FRATE(none, "sclk_usbh20", NULL, CLK_IS_ROOT, 48000000),
+	FRATE(none, "mphy_refclk_ixtal24", NULL, CLK_IS_ROOT, 48000000),
+	FRATE(none, "sclk_usbh20_scan_clk", NULL, CLK_IS_ROOT, 480000000),
+};
+
+struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = {
+	FFACTOR(none, "sclk_hsic_12m", "fin_pll", 1, 2, 0),
+};
+
+struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
+	MUX(none, "mout_mspll_kfc", mspll_cpu_p, SRC_TOP7, 8, 2),
+	MUX(none, "mout_mspll_cpu", mspll_cpu_p, SRC_TOP7, 12, 2),
+	MUX(none, "mout_apll", apll_p, SRC_CPU, 0, 1),
+	MUX(none, "mout_cpu", cpu_p, SRC_CPU, 16, 1),
+	MUX(none, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
+	MUX(none, "mout_cpu_kfc", kfc_p, SRC_KFC, 16, 1),
+
+	MUX(none, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
+
+	MUX_A(none, "mout_aclk400_mscl", group1_p,
+			SRC_TOP0, 4, 2, "aclk400_mscl"),
+	MUX(none, "mout_aclk200", group1_p, SRC_TOP0, 8, 2),
+	MUX(none, "mout_aclk200_fsys2", group1_p, SRC_TOP0, 12, 2),
+	MUX(none, "mout_aclk200_fsys", group1_p, SRC_TOP0, 28, 2),
+
+	MUX(none, "mout_aclk333_432_gscl", group4_p, SRC_TOP1, 0, 2),
+	MUX(none, "mout_aclk66", group1_p, SRC_TOP1, 8, 2),
+	MUX(none, "mout_aclk266", group1_p, SRC_TOP1, 20, 2),
+	MUX(none, "mout_aclk166", group1_p, SRC_TOP1, 24, 2),
+	MUX(none, "mout_aclk333", group1_p, SRC_TOP1, 28, 2),
+
+	MUX(none, "mout_aclk333_g2d", group1_p, SRC_TOP2, 8, 2),
+	MUX(none, "mout_aclk266_g2d", group1_p, SRC_TOP2, 12, 2),
+	MUX(none, "mout_aclk_g3d", group5_p, SRC_TOP2, 16, 1),
+	MUX(none, "mout_aclk300_jpeg", group1_p, SRC_TOP2, 20, 2),
+	MUX(none, "mout_aclk300_disp1", group1_p, SRC_TOP2, 24, 2),
+	MUX(none, "mout_aclk300_gscl", group1_p, SRC_TOP2, 28, 2),
+
+	MUX(none, "mout_user_aclk400_mscl", user_aclk400_mscl_p,
+			SRC_TOP3, 4, 1),
+	MUX_A(none, "mout_aclk200_disp1", aclk200_disp1_p,
+			SRC_TOP3, 8, 1, "aclk200_disp1"),
+	MUX(none, "mout_user_aclk200_fsys2", user_aclk200_fsys2_p,
+			SRC_TOP3, 12, 1),
+	MUX(none, "mout_user_aclk200_fsys", user_aclk200_fsys_p,
+			SRC_TOP3, 28, 1),
+
+	MUX(none, "mout_user_aclk333_432_gscl", user_aclk333_432_gscl_p,
+			SRC_TOP4, 0, 1),
+	MUX(none, "mout_aclk66_peric", aclk66_peric_p, SRC_TOP4, 8, 1),
+	MUX(none, "mout_user_aclk266", user_aclk266_p, SRC_TOP4, 20, 1),
+	MUX(none, "mout_user_aclk166", user_aclk166_p, SRC_TOP4, 24, 1),
+	MUX(none, "mout_user_aclk333", user_aclk333_p, SRC_TOP4, 28, 1),
+
+	MUX(none, "mout_aclk66_psgen", aclk66_peric_p, SRC_TOP5, 4, 1),
+	MUX(none, "mout_user_aclk333_g2d", user_aclk333_g2d_p, SRC_TOP5, 8, 1),
+	MUX(none, "mout_user_aclk266_g2d", user_aclk266_g2d_p, SRC_TOP5, 12, 1),
+	MUX_A(none, "mout_user_aclk_g3d", user_aclk_g3d_p,
+			SRC_TOP5, 16, 1, "aclkg3d"),
+	MUX(none, "mout_user_aclk300_jpeg", user_aclk300_jpeg_p,
+			SRC_TOP5, 20, 1),
+	MUX(none, "mout_user_aclk300_disp1", user_aclk300_disp1_p,
+			SRC_TOP5, 24, 1),
+	MUX(none, "mout_user_aclk300_gscl", user_aclk300_gscl_p,
+			SRC_TOP5, 28, 1),
+
+	MUX(none, "sclk_mpll", mpll_p, SRC_TOP6, 0, 1),
+	MUX(none, "sclk_vpll", vpll_p, SRC_TOP6, 4, 1),
+	MUX(none, "sclk_spll", spll_p, SRC_TOP6, 8, 1),
+	MUX(none, "sclk_ipll", ipll_p, SRC_TOP6, 12, 1),
+	MUX(none, "sclk_rpll", rpll_p, SRC_TOP6, 16, 1),
+	MUX(none, "sclk_epll", epll_p, SRC_TOP6, 20, 1),
+	MUX(none, "sclk_dpll", dpll_p, SRC_TOP6, 24, 1),
+	MUX(none, "sclk_cpll", cpll_p, SRC_TOP6, 28, 1),
+
+	MUX(none, "mout_sw_aclk400_mscl", sw_aclk400_mscl_p, SRC_TOP10, 4, 1),
+	MUX(none, "mout_sw_aclk200", sw_aclk200_p, SRC_TOP10, 8, 1),
+	MUX(none, "mout_sw_aclk200_fsys2", sw_aclk200_fsys2_p,
+			SRC_TOP10, 12, 1),
+	MUX(none, "mout_sw_aclk200_fsys", sw_aclk200_fsys_p, SRC_TOP10, 28, 1),
+
+	MUX(none, "mout_sw_aclk333_432_gscl", sw_aclk333_432_gscl_p,
+			SRC_TOP11, 0, 1),
+	MUX(none, "mout_sw_aclk66", sw_aclk66_p, SRC_TOP11, 8, 1),
+	MUX(none, "mout_sw_aclk266", sw_aclk266_p, SRC_TOP11, 20, 1),
+	MUX(none, "mout_sw_aclk166", sw_aclk166_p, SRC_TOP11, 24, 1),
+	MUX(none, "mout_sw_aclk333", sw_aclk333_p, SRC_TOP11, 28, 1),
+
+	MUX(none, "mout_sw_aclk333_g2d", sw_aclk333_g2d_p, SRC_TOP12, 8, 1),
+	MUX(none, "mout_sw_aclk266_g2d", sw_aclk266_g2d_p, SRC_TOP12, 12, 1),
+	MUX(none, "mout_sw_aclk_g3d", sw_aclk_g3d_p, SRC_TOP12, 16, 1),
+	MUX(none, "mout_sw_aclk300_jpeg", sw_aclk300_jpeg_p, SRC_TOP12, 20, 1),
+	MUX(none, "mout_sw_aclk300_disp1", sw_aclk300_disp1_p,
+			SRC_TOP12, 24, 1),
+	MUX(none, "mout_sw_aclk300_gscl", sw_aclk300_gscl_p, SRC_TOP12, 28, 1),
+
+	/* DISP1 Block */
+	MUX(none, "mout_fimd1", group3_p, SRC_DISP10, 4, 1),
+	MUX(none, "mout_mipi1", group2_p, SRC_DISP10, 16, 3),
+	MUX(none, "mout_dp1", group2_p, SRC_DISP10, 20, 3),
+	MUX(none, "mout_pixel", group2_p, SRC_DISP10, 24, 3),
+	MUX(none, "mout_hdmi", hdmi_p, SRC_DISP10, 28, 1),
+
+	/* MAU Block */
+	MUX(none, "mout_maudio0", maudio0_p, SRC_MAU, 28, 3),
+
+	/* FSYS Block */
+	MUX(none, "mout_usbd301", group2_p, SRC_FSYS, 4, 3),
+	MUX(none, "mout_mmc0", group2_p, SRC_FSYS, 8, 3),
+	MUX(none, "mout_mmc1", group2_p, SRC_FSYS, 12, 3),
+	MUX(none, "mout_mmc2", group2_p, SRC_FSYS, 16, 3),
+	MUX(none, "mout_usbd300", group2_p, SRC_FSYS, 20, 3),
+	MUX(none, "mout_unipro", group2_p, SRC_FSYS, 24, 3),
+
+	/* PERIC Block */
+	MUX(none, "mout_uart0", group2_p, SRC_PERIC0, 4, 3),
+	MUX(none, "mout_uart1", group2_p, SRC_PERIC0, 8, 3),
+	MUX(none, "mout_uart2", group2_p, SRC_PERIC0, 12, 3),
+	MUX(none, "mout_uart3", group2_p, SRC_PERIC0, 16, 3),
+	MUX(none, "mout_pwm", group2_p, SRC_PERIC0, 24, 3),
+	MUX(none, "mout_spdif", spdif_p, SRC_PERIC0, 28, 3),
+	MUX(none, "mout_audio0", audio0_p, SRC_PERIC1, 8, 3),
+	MUX(none, "mout_audio1", audio1_p, SRC_PERIC1, 12, 3),
+	MUX(none, "mout_audio2", audio2_p, SRC_PERIC1, 16, 3),
+	MUX(none, "mout_spi0", group2_p, SRC_PERIC1, 20, 3),
+	MUX(none, "mout_spi1", group2_p, SRC_PERIC1, 24, 3),
+	MUX(none, "mout_spi2", group2_p, SRC_PERIC1, 28, 3),
+};
+
+struct samsung_div_clock exynos5420_div_clks[] __initdata = {
+	DIV(none, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
+	DIV(none, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
+	DIV(none, "armclk2", "div_arm", DIV_CPU0, 28, 3),
+	DIV(none, "div_kfc", "mout_cpu_kfc", DIV_KFC0, 0, 3),
+	DIV(none, "sclk_kpll", "mout_kpll", DIV_KFC0, 24, 3),
+
+	DIV(none, "dout_aclk400_mscl", "mout_aclk400_mscl", DIV_TOP0, 4, 3),
+	DIV(none, "dout_aclk200", "mout_aclk200", DIV_TOP0, 8, 3),
+	DIV(none, "dout_aclk200_fsys2", "mout_aclk200_fsys2", DIV_TOP0, 12, 3),
+	DIV(none, "dout_pclk200_fsys", "mout_pclk200_fsys", DIV_TOP0, 24, 3),
+	DIV(none, "dout_aclk200_fsys", "mout_aclk200_fsys", DIV_TOP0, 28, 3),
+
+	DIV(none, "dout_aclk333_432_gscl", "mout_aclk333_432_gscl",
+			DIV_TOP1, 0, 3),
+	DIV(none, "dout_aclk66", "mout_aclk66", DIV_TOP1, 8, 6),
+	DIV(none, "dout_aclk266", "mout_aclk266", DIV_TOP1, 20, 3),
+	DIV(none, "dout_aclk166", "mout_aclk166", DIV_TOP1, 24, 3),
+	DIV(none, "dout_aclk333", "mout_aclk333", DIV_TOP1, 28, 3),
+
+	DIV(none, "dout_aclk333_g2d", "mout_aclk333_g2d", DIV_TOP2, 8, 3),
+	DIV(none, "dout_aclk266_g2d", "mout_aclk266_g2d", DIV_TOP2, 12, 3),
+	DIV(none, "dout_aclk_g3d", "mout_aclk_g3d", DIV_TOP2, 16, 3),
+	DIV(none, "dout_aclk300_jpeg", "mout_aclk300_jpeg", DIV_TOP2, 20, 3),
+	DIV_A(none, "dout_aclk300_disp1", "mout_aclk300_disp1",
+			DIV_TOP2, 24, 3, "aclk300_disp1"),
+	DIV(none, "dout_aclk300_gscl", "mout_aclk300_gscl", DIV_TOP2, 28, 3),
+
+	/* DISP1 Block */
+	DIV(none, "dout_fimd1", "mout_fimd1", DIV_DISP10, 0, 4),
+	DIV(none, "dout_mipi1", "mout_mipi1", DIV_DISP10, 16, 8),
+	DIV(none, "dout_dp1", "mout_dp1", DIV_DISP10, 24, 4),
+	DIV(none, "dout_hdmi_pixel", "mout_pixel", DIV_DISP10, 28, 4),
+
+	/* Audio Block */
+	DIV(none, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
+	DIV(none, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8),
+
+	/* USB3.0 */
+	DIV(none, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4),
+	DIV(none, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
+	DIV(none, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4),
+	DIV(none, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
+
+	/* MMC */
+	DIV(none, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10),
+	DIV(none, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10),
+	DIV(none, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10),
+
+	DIV(none, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8),
+
+	/* UART and PWM */
+	DIV(none, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4),
+	DIV(none, "dout_uart1", "mout_uart1", DIV_PERIC0, 12, 4),
+	DIV(none, "dout_uart2", "mout_uart2", DIV_PERIC0, 16, 4),
+	DIV(none, "dout_uart3", "mout_uart3", DIV_PERIC0, 20, 4),
+	DIV(none, "dout_pwm", "mout_pwm", DIV_PERIC0, 28, 4),
+
+	/* SPI */
+	DIV(none, "dout_spi0", "mout_spi0", DIV_PERIC1, 20, 4),
+	DIV(none, "dout_spi1", "mout_spi1", DIV_PERIC1, 24, 4),
+	DIV(none, "dout_spi2", "mout_spi2", DIV_PERIC1, 28, 4),
+
+	/* PCM */
+	DIV(none, "dout_pcm1", "dout_audio1", DIV_PERIC2, 16, 8),
+	DIV(none, "dout_pcm2", "dout_audio2", DIV_PERIC2, 24, 8),
+
+	/* Audio - I2S */
+	DIV(none, "dout_i2s1", "dout_audio1", DIV_PERIC3, 6, 6),
+	DIV(none, "dout_i2s2", "dout_audio2", DIV_PERIC3, 12, 6),
+	DIV(none, "dout_audio0", "mout_audio0", DIV_PERIC3, 20, 4),
+	DIV(none, "dout_audio1", "mout_audio1", DIV_PERIC3, 24, 4),
+	DIV(none, "dout_audio2", "mout_audio2", DIV_PERIC3, 28, 4),
+
+	/* SPI Pre-Ratio */
+	DIV(none, "dout_pre_spi0", "dout_spi0", DIV_PERIC4, 8, 8),
+	DIV(none, "dout_pre_spi1", "dout_spi1", DIV_PERIC4, 16, 8),
+	DIV(none, "dout_pre_spi2", "dout_spi2", DIV_PERIC4, 24, 8),
+};
+
+struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
+	/* TODO: Re-verify the CG bits for all the gate clocks */
+	GATE_A(mct, "pclk_st", "aclk66_psgen", GATE_BUS_PERIS1, 2, 0, 0, "mct"),
+
+	GATE(0, "aclk200_fsys", "mout_user_aclk200_fsys",
+			GATE_BUS_FSYS0, 9, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk200_fsys2", "mout_user_aclk200_fsys2",
+			GATE_BUS_FSYS0, 10, CLK_IGNORE_UNUSED, 0),
+
+	GATE(0, "aclk333_g2d", "mout_user_aclk333_g2d",
+			GATE_BUS_TOP, 0, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk266_g2d", "mout_user_aclk266_g2d",
+			GATE_BUS_TOP, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk300_jpeg", "mout_user_aclk300_jpeg",
+			GATE_BUS_TOP, 4, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk300_gscl", "mout_user_aclk300_gscl",
+			GATE_BUS_TOP, 6, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk333_432_gscl", "mout_user_aclk333_432_gscl",
+			GATE_BUS_TOP, 7, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "pclk66_gpio", "mout_sw_aclk66",
+			GATE_BUS_TOP, 9, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk66_psgen", "mout_aclk66_psgen",
+			GATE_BUS_TOP, 10, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk66_peric", "mout_aclk66_peric",
+			GATE_BUS_TOP, 11, 0, 0),
+	GATE(0, "aclk166", "mout_user_aclk166",
+			GATE_BUS_TOP, 14, CLK_IGNORE_UNUSED, 0),
+	GATE(0, "aclk333", "mout_aclk333",
+			GATE_BUS_TOP, 15, CLK_IGNORE_UNUSED, 0),
+
+	/* sclk */
+	GATE(sclk_uart0, "sclk_uart0", "dout_uart0",
+		GATE_TOP_SCLK_PERIC, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_uart1, "sclk_uart1", "dout_uart1",
+		GATE_TOP_SCLK_PERIC, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_uart2, "sclk_uart2", "dout_uart2",
+		GATE_TOP_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_uart3, "sclk_uart3", "dout_uart3",
+		GATE_TOP_SCLK_PERIC, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_spi0, "sclk_spi0", "dout_pre_spi0",
+		GATE_TOP_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_spi1, "sclk_spi1", "dout_pre_spi1",
+		GATE_TOP_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_spi2, "sclk_spi2", "dout_pre_spi2",
+		GATE_TOP_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_spdif, "sclk_spdif", "mout_spdif",
+		GATE_TOP_SCLK_PERIC, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_pwm, "sclk_pwm", "dout_pwm",
+		GATE_TOP_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_pcm1, "sclk_pcm1", "dout_pcm1",
+		GATE_TOP_SCLK_PERIC, 15, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_pcm2, "sclk_pcm2", "dout_pcm2",
+		GATE_TOP_SCLK_PERIC, 16, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_i2s1, "sclk_i2s1", "dout_i2s1",
+		GATE_TOP_SCLK_PERIC, 17, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_i2s2, "sclk_i2s2", "dout_i2s2",
+		GATE_TOP_SCLK_PERIC, 18, CLK_SET_RATE_PARENT, 0),
+
+	GATE(sclk_mmc0, "sclk_mmc0", "dout_mmc0",
+		GATE_TOP_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_mmc1, "sclk_mmc1", "dout_mmc1",
+		GATE_TOP_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_mmc2, "sclk_mmc2", "dout_mmc2",
+		GATE_TOP_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_usbphy301, "sclk_usbphy301", "dout_usbphy301",
+		GATE_TOP_SCLK_FSYS, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_usbphy300, "sclk_usbphy300", "dout_usbphy300",
+		GATE_TOP_SCLK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_usbd300, "sclk_usbd300", "dout_usbd300",
+		GATE_TOP_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_usbd301, "sclk_usbd301", "dout_usbd301",
+		GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
+
+	GATE(sclk_usbd301, "sclk_unipro", "dout_unipro",
+		SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+
+	GATE(sclk_gscl_wa, "sclk_gscl_wa", "aclK333_432_gscl",
+		GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_gscl_wb, "sclk_gscl_wb", "aclk333_432_gscl",
+		GATE_TOP_SCLK_GSCL, 7, CLK_SET_RATE_PARENT, 0),
+
+	/* Display */
+	GATE(sclk_fimd1, "sclk_fimd1", "dout_fimd1",
+		GATE_TOP_SCLK_DISP1, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_mipi1, "sclk_mipi1", "dout_mipi1",
+		GATE_TOP_SCLK_DISP1, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi",
+		GATE_TOP_SCLK_DISP1, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_pixel, "sclk_pixel", "dout_hdmi_pixel",
+		GATE_TOP_SCLK_DISP1, 10, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_dp1, "sclk_dp1", "dout_dp1",
+		GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
+
+	/* Maudio Block */
+	GATE(sclk_maudio0, "sclk_maudio0", "dout_maudio0",
+		GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
+	GATE(sclk_maupcm0, "sclk_maupcm0", "dout_maupcm0",
+		GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
+	/* FSYS */
+	GATE(tsi, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
+	GATE(pdma0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
+	GATE(pdma1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
+	GATE(ufs, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
+	GATE(rtic, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0),
+	GATE(mmc0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0),
+	GATE(mmc1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0),
+	GATE(mmc2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0),
+	GATE(sromc, "sromc", "aclk200_fsys2",
+			GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0),
+	GATE(usbh20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0),
+	GATE(usbd300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0),
+	GATE(usbd301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0),
+
+	/* UART */
+	GATE(uart0, "uart0", "aclk66_peric", GATE_BUS_PERIC, 4, 0, 0),
+	GATE(uart1, "uart1", "aclk66_peric", GATE_BUS_PERIC, 5, 0, 0),
+	GATE_A(uart2, "uart2", "aclk66_peric",
+		GATE_BUS_PERIC, 6, CLK_IGNORE_UNUSED, 0, "uart2"),
+	GATE(uart3, "uart3", "aclk66_peric", GATE_BUS_PERIC, 7, 0, 0),
+	/* I2C */
+	GATE(i2c0, "i2c0", "aclk66_peric", GATE_BUS_PERIC, 9, 0, 0),
+	GATE(i2c1, "i2c1", "aclk66_peric", GATE_BUS_PERIC, 10, 0, 0),
+	GATE(i2c2, "i2c2", "aclk66_peric", GATE_BUS_PERIC, 11, 0, 0),
+	GATE(i2c3, "i2c3", "aclk66_peric", GATE_BUS_PERIC, 12, 0, 0),
+	GATE(i2c4, "i2c4", "aclk66_peric", GATE_BUS_PERIC, 13, 0, 0),
+	GATE(i2c5, "i2c5", "aclk66_peric", GATE_BUS_PERIC, 14, 0, 0),
+	GATE(i2c6, "i2c6", "aclk66_peric", GATE_BUS_PERIC, 15, 0, 0),
+	GATE(i2c7, "i2c7", "aclk66_peric", GATE_BUS_PERIC, 16, 0, 0),
+	GATE(i2c_hdmi, "i2c_hdmi", "aclk66_peric", GATE_BUS_PERIC, 17, 0, 0),
+	GATE(tsadc, "tsadc", "aclk66_peric", GATE_BUS_PERIC, 18, 0, 0),
+	/* SPI */
+	GATE(spi0, "spi0", "aclk66_peric", GATE_BUS_PERIC, 19, 0, 0),
+	GATE(spi1, "spi1", "aclk66_peric", GATE_BUS_PERIC, 20, 0, 0),
+	GATE(spi2, "spi2", "aclk66_peric", GATE_BUS_PERIC, 21, 0, 0),
+	GATE(keyif, "keyif", "aclk66_peric", GATE_BUS_PERIC, 22, 0, 0),
+	/* I2S */
+	GATE(i2s1, "i2s1", "aclk66_peric", GATE_BUS_PERIC, 23, 0, 0),
+	GATE(i2s2, "i2s2", "aclk66_peric", GATE_BUS_PERIC, 24, 0, 0),
+	/* PCM */
+	GATE(pcm1, "pcm1", "aclk66_peric", GATE_BUS_PERIC, 25, 0, 0),
+	GATE(pcm2, "pcm2", "aclk66_peric", GATE_BUS_PERIC, 26, 0, 0),
+	/* PWM */
+	GATE(pwm, "pwm", "aclk66_peric", GATE_BUS_PERIC, 27, 0, 0),
+	/* SPDIF */
+	GATE(spdif, "spdif", "aclk66_peric", GATE_BUS_PERIC, 29, 0, 0),
+
+	GATE(i2c8, "i2c8", "aclk66_peric", GATE_BUS_PERIC1, 0, 0, 0),
+	GATE(i2c9, "i2c9", "aclk66_peric", GATE_BUS_PERIC1, 1, 0, 0),
+	GATE(i2c10, "i2c10", "aclk66_peric", GATE_BUS_PERIC1, 2, 0, 0),
+
+	GATE(chipid, "chipid", "aclk66_psgen",
+			GATE_BUS_PERIS0, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(sysreg, "sysreg", "aclk66_psgen",
+			GATE_BUS_PERIS0, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(tzpc0, "tzpc0", "aclk66_psgen", GATE_BUS_PERIS0, 18, 0, 0),
+	GATE(tzpc1, "tzpc1", "aclk66_psgen", GATE_BUS_PERIS0, 19, 0, 0),
+	GATE(tzpc2, "tzpc2", "aclk66_psgen", GATE_BUS_PERIS0, 20, 0, 0),
+	GATE(tzpc3, "tzpc3", "aclk66_psgen", GATE_BUS_PERIS0, 21, 0, 0),
+	GATE(tzpc4, "tzpc4", "aclk66_psgen", GATE_BUS_PERIS0, 22, 0, 0),
+	GATE(tzpc5, "tzpc5", "aclk66_psgen", GATE_BUS_PERIS0, 23, 0, 0),
+	GATE(tzpc6, "tzpc6", "aclk66_psgen", GATE_BUS_PERIS0, 24, 0, 0),
+	GATE(tzpc7, "tzpc7", "aclk66_psgen", GATE_BUS_PERIS0, 25, 0, 0),
+	GATE(tzpc8, "tzpc8", "aclk66_psgen", GATE_BUS_PERIS0, 26, 0, 0),
+	GATE(tzpc9, "tzpc9", "aclk66_psgen", GATE_BUS_PERIS0, 27, 0, 0),
+
+	GATE(hdmi_cec, "hdmi_cec", "aclk66_psgen", GATE_BUS_PERIS1, 0, 0, 0),
+	GATE(seckey, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
+	GATE(wdt, "wdt", "aclk66_psgen", GATE_BUS_PERIS1, 3, 0, 0),
+	GATE(rtc, "rtc", "aclk66_psgen", GATE_BUS_PERIS1, 4, 0, 0),
+	GATE(tmu, "tmu", "aclk66_psgen", GATE_BUS_PERIS1, 5, 0, 0),
+	GATE(tmu_gpu, "tmu_gpu", "aclk66_psgen", GATE_BUS_PERIS1, 6, 0, 0),
+
+	GATE(gscl0, "gscl0", "aclk300_gscl", GATE_IP_GSCL0, 0, 0, 0),
+	GATE(gscl1, "gscl1", "aclk300_gscl", GATE_IP_GSCL0, 1, 0, 0),
+	GATE(clk_3aa, "clk_3aa", "aclk300_gscl", GATE_IP_GSCL0, 4, 0, 0),
+
+	GATE(smmu_3aa, "smmu_3aa", "aclk333_432_gscl", GATE_IP_GSCL1, 2, 0, 0),
+	GATE(smmu_fimcl0, "smmu_fimcl0", "aclk333_432_gscl",
+			GATE_IP_GSCL1, 3, 0, 0),
+	GATE(smmu_fimcl1, "smmu_fimcl1", "aclk333_432_gscl",
+			GATE_IP_GSCL1, 4, 0, 0),
+	GATE(smmu_gscl0, "smmu_gscl0", "aclk300_gscl", GATE_IP_GSCL1, 6, 0, 0),
+	GATE(smmu_gscl1, "smmu_gscl1", "aclk300_gscl", GATE_IP_GSCL1, 7, 0, 0),
+	GATE(gscl_wa, "gscl_wa", "aclk300_gscl", GATE_IP_GSCL1, 12, 0, 0),
+	GATE(gscl_wb, "gscl_wb", "aclk300_gscl", GATE_IP_GSCL1, 13, 0, 0),
+	GATE(smmu_fimcl3, "smmu_fimcl3,", "aclk333_432_gscl",
+			GATE_IP_GSCL1, 16, 0, 0),
+	GATE(fimc_lite3, "fimc_lite3", "aclk333_432_gscl",
+			GATE_IP_GSCL1, 17, 0, 0),
+
+	GATE(fimd1, "fimd1", "aclk300_disp1", GATE_IP_DISP1, 0, 0, 0),
+	GATE(dsim1, "dsim1", "aclk200_disp1", GATE_IP_DISP1, 3, 0, 0),
+	GATE(dp1, "dp1", "aclk200_disp1", GATE_IP_DISP1, 4, 0, 0),
+	GATE(mixer, "mixer", "aclk166", GATE_IP_DISP1, 5, 0, 0),
+	GATE(hdmi, "hdmi", "aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
+	GATE(smmu_fimd1, "smmu_fimd1", "aclk300_disp1", GATE_IP_DISP1, 8, 0, 0),
+
+	GATE(mfc, "mfc", "aclk333", GATE_IP_MFC, 0, 0, 0),
+	GATE(smmu_mfcl, "smmu_mfcl", "aclk333", GATE_IP_MFC, 1, 0, 0),
+	GATE(smmu_mfcr, "smmu_mfcr", "aclk333", GATE_IP_MFC, 2, 0, 0),
+
+	GATE(g3d, "g3d", "aclkg3d", GATE_IP_G3D, 9, 0, 0),
+
+	GATE(rotator, "rotator", "aclk266", GATE_IP_GEN, 1, 0, 0),
+	GATE(jpeg, "jpeg", "aclk300_jpeg", GATE_IP_GEN, 2, 0, 0),
+	GATE(jpeg2, "jpeg2", "aclk300_jpeg", GATE_IP_GEN, 3, 0, 0),
+	GATE(mdma1, "mdma1", "aclk266", GATE_IP_GEN, 4, 0, 0),
+	GATE(smmu_rotator, "smmu_rotator", "aclk266", GATE_IP_GEN, 6, 0, 0),
+	GATE(smmu_jpeg, "smmu_jpeg", "aclk300_jpeg", GATE_IP_GEN, 7, 0, 0),
+	GATE(smmu_mdma1, "smmu_mdma1", "aclk266", GATE_IP_GEN, 9, 0, 0),
+
+	GATE(mscl0, "mscl0", "aclk400_mscl", GATE_IP_MSCL, 0, 0, 0),
+	GATE(mscl1, "mscl1", "aclk400_mscl", GATE_IP_MSCL, 1, 0, 0),
+	GATE(mscl2, "mscl2", "aclk400_mscl", GATE_IP_MSCL, 2, 0, 0),
+	GATE(smmu_mscl0, "smmu_mscl0", "aclk400_mscl", GATE_IP_MSCL, 8, 0, 0),
+	GATE(smmu_mscl1, "smmu_mscl1", "aclk400_mscl", GATE_IP_MSCL, 9, 0, 0),
+	GATE(smmu_mscl2, "smmu_mscl2", "aclk400_mscl", GATE_IP_MSCL, 10, 0, 0),
+};
+
+static __initdata struct of_device_id ext_clk_match[] = {
+	{ .compatible = "samsung,exynos5420-oscclk", .data = (void *)0, },
+	{ },
+};
+
+/* register exynos5420 clocks */
+void __init exynos5420_clk_init(struct device_node *np)
+{
+	void __iomem *reg_base;
+	struct clk *apll, *bpll, *cpll, *dpll, *epll, *ipll, *kpll, *mpll;
+	struct clk *rpll, *spll, *vpll;
+
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	} else {
+		panic("%s: unable to determine soc\n", __func__);
+	}
+
+	samsung_clk_init(np, reg_base, nr_clks,
+			exynos5420_clk_regs, ARRAY_SIZE(exynos5420_clk_regs),
+			NULL, 0);
+	samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
+			ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
+			ext_clk_match);
+
+	apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
+			reg_base + 0x100);
+	bpll = samsung_clk_register_pll35xx("fout_bpll", "fin_pll",
+			reg_base + 0x20110);
+	cpll = samsung_clk_register_pll35xx("fout_cpll", "fin_pll",
+			reg_base + 0x10120);
+	dpll = samsung_clk_register_pll35xx("fout_dpll", "fin_pll",
+			reg_base + 0x10128);
+	epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll",
+			reg_base + 0x10130);
+	ipll = samsung_clk_register_pll35xx("fout_ipll", "fin_pll",
+			reg_base + 0x10150);
+	kpll = samsung_clk_register_pll35xx("fout_kpll", "fin_pll",
+			reg_base + 0x28100);
+	mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
+			reg_base + 0x10180);
+	rpll = samsung_clk_register_pll36xx("fout_rpll", "fin_pll",
+			reg_base + 0x10140);
+	spll = samsung_clk_register_pll35xx("fout_spll", "fin_pll",
+			reg_base + 0x10160);
+	vpll = samsung_clk_register_pll35xx("fout_vpll", "fin_pll",
+			reg_base + 0x10170);
+
+	samsung_clk_register_fixed_rate(exynos5420_fixed_rate_clks,
+			ARRAY_SIZE(exynos5420_fixed_rate_clks));
+	samsung_clk_register_fixed_factor(exynos5420_fixed_factor_clks,
+			ARRAY_SIZE(exynos5420_fixed_factor_clks));
+	samsung_clk_register_mux(exynos5420_mux_clks,
+			ARRAY_SIZE(exynos5420_mux_clks));
+	samsung_clk_register_div(exynos5420_div_clks,
+			ARRAY_SIZE(exynos5420_div_clks));
+	samsung_clk_register_gate(exynos5420_gate_clks,
+			ARRAY_SIZE(exynos5420_gate_clks));
+}
+CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 662fcc06582..a70480409ea 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -400,18 +400,6 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mct_tick0_event_irq = {
-	.name		= "mct_tick0_irq",
-	.flags		= IRQF_TIMER | IRQF_NOBALANCING,
-	.handler	= exynos4_mct_tick_isr,
-};
-
-static struct irqaction mct_tick1_event_irq = {
-	.name		= "mct_tick1_irq",
-	.flags		= IRQF_TIMER | IRQF_NOBALANCING,
-	.handler	= exynos4_mct_tick_isr,
-};
-
 static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt;
@@ -435,16 +423,15 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 
 	if (mct_int_type == MCT_INT_SPI) {
-		if (cpu == 0) {
-			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = mct_irqs[MCT_L0_IRQ];
-			setup_irq(evt->irq, &mct_tick0_event_irq);
-		} else {
-			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = mct_irqs[MCT_L1_IRQ];
-			setup_irq(evt->irq, &mct_tick1_event_irq);
-			irq_set_affinity(evt->irq, cpumask_of(1));
+		evt->irq = mct_irqs[MCT_L0_IRQ + cpu];
+		if (request_irq(evt->irq, exynos4_mct_tick_isr,
+				IRQF_TIMER | IRQF_NOBALANCING,
+				evt->name, mevt)) {
+			pr_err("exynos-mct: cannot register IRQ %d\n",
+				evt->irq);
+			return -EIO;
 		}
+		irq_set_affinity(evt->irq, cpumask_of(cpu));
 	} else {
 		enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
 	}
@@ -454,13 +441,9 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 
 static void exynos4_local_timer_stop(struct clock_event_device *evt)
 {
-	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI)
-		if (cpu == 0)
-			remove_irq(evt->irq, &mct_tick0_event_irq);
-		else
-			remove_irq(evt->irq, &mct_tick1_event_irq);
+		free_irq(evt->irq, this_cpu_ptr(&percpu_mct_tick));
 	else
 		disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
 }
diff --git a/drivers/iommu/msm_iommu_dev.c b/drivers/iommu/msm_iommu_dev.c
index 8e8fb079852..9144a6beed9 100644
--- a/drivers/iommu/msm_iommu_dev.c
+++ b/drivers/iommu/msm_iommu_dev.c
@@ -29,7 +29,6 @@
 
 #include <mach/iommu_hw-8xxx.h>
 #include <mach/iommu.h>
-#include <mach/clk.h>
 
 struct iommu_ctx_iter_data {
 	/* input */
@@ -160,7 +159,7 @@ static int msm_iommu_probe(struct platform_device *pdev)
 		goto fail;
 	}
 
-	ret = clk_enable(iommu_pclk);
+	ret = clk_prepare_enable(iommu_pclk);
 	if (ret)
 		goto fail_enable;
 
@@ -168,9 +167,9 @@ static int msm_iommu_probe(struct platform_device *pdev)
 
 	if (!IS_ERR(iommu_clk))	{
 		if (clk_get_rate(iommu_clk) == 0)
-			clk_set_min_rate(iommu_clk, 1);
+			clk_set_rate(iommu_clk, 1);
 
-		ret = clk_enable(iommu_clk);
+		ret = clk_prepare_enable(iommu_clk);
 		if (ret) {
 			clk_put(iommu_clk);
 			goto fail_pclk;
@@ -261,7 +260,7 @@ fail_clk:
 		clk_put(iommu_clk);
 	}
 fail_pclk:
-	clk_disable(iommu_pclk);
+	clk_disable_unprepare(iommu_pclk);
 fail_enable:
 	clk_put(iommu_pclk);
 fail:
@@ -275,8 +274,11 @@ static int msm_iommu_remove(struct platform_device *pdev)
 
 	drv = platform_get_drvdata(pdev);
 	if (drv) {
-		if (drv->clk)
+		if (drv->clk) {
+			clk_unprepare(drv->clk);
 			clk_put(drv->clk);
+		}
+		clk_unprepare(drv->pclk);
 		clk_put(drv->pclk);
 		memset(drv, 0, sizeof(*drv));
 		kfree(drv);
@@ -314,14 +316,14 @@ static int msm_iommu_ctx_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&ctx_drvdata->attached_elm);
 	platform_set_drvdata(pdev, ctx_drvdata);
 
-	ret = clk_enable(drvdata->pclk);
+	ret = clk_prepare_enable(drvdata->pclk);
 	if (ret)
 		goto fail;
 
 	if (drvdata->clk) {
-		ret = clk_enable(drvdata->clk);
+		ret = clk_prepare_enable(drvdata->clk);
 		if (ret) {
-			clk_disable(drvdata->pclk);
+			clk_disable_unprepare(drvdata->pclk);
 			goto fail;
 		}
 	}
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 0ee4a57fe6b..b900de4e7e9 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -1268,10 +1268,18 @@ msmsdcc_probe(struct platform_device *pdev)
 		goto clk_put;
 	}
 
+	ret = clk_prepare(host->pclk);
+	if (ret)
+		goto clk_put;
+
+	ret = clk_prepare(host->clk);
+	if (ret)
+		goto clk_unprepare_p;
+
 	/* Enable clocks */
 	ret = msmsdcc_enable_clocks(host);
 	if (ret)
-		goto clk_put;
+		goto clk_unprepare;
 
 	host->pclk_rate = clk_get_rate(host->pclk);
 	host->clk_rate = clk_get_rate(host->clk);
@@ -1386,6 +1394,10 @@ msmsdcc_probe(struct platform_device *pdev)
 		free_irq(host->stat_irq, host);
  clk_disable:
 	msmsdcc_disable_clocks(host, 0);
+ clk_unprepare:
+	clk_unprepare(host->clk);
+ clk_unprepare_p:
+	clk_unprepare(host->pclk);
  clk_put:
 	clk_put(host->clk);
  pclk_put:
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 2d76f66a2e0..5f58cf0e96e 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -941,3 +941,121 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
 		.label		= "exynos5250-gpio-ctrl3",
 	},
 };
+
+/* pin banks of exynos5420 pin-controller 0 */
+static struct samsung_pin_bank exynos5420_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5420 pin-controller 1 */
+static struct samsung_pin_bank exynos5420_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpc0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpc3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpc4", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpd1", 0x14),
+	EXYNOS_PIN_BANK_EINTN(6, 0x0C0, "gpy0"),
+	EXYNOS_PIN_BANK_EINTN(4, 0x0E0, "gpy1"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x100, "gpy2"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpy3"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpy4"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x160, "gpy5"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy6"),
+};
+
+/* pin banks of exynos5420 pin-controller 2 */
+static struct samsung_pin_bank exynos5420_pin_banks2[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(6, 0x040, "gpf0", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpf1", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
+	EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gpj4", 0x1c),
+};
+
+/* pin banks of exynos5420 pin-controller 3 */
+static struct samsung_pin_bank exynos5420_pin_banks3[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpb3", 0x18),
+	EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpb4", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph0", 0x20),
+};
+
+/* pin banks of exynos5420 pin-controller 4 */
+static struct samsung_pin_bank exynos5420_pin_banks4[] = {
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5420 SoC. Exynos5420 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5420_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos5420_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks0),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.weint_con	= EXYNOS_WKUP_ECON_OFFSET,
+		.weint_mask	= EXYNOS_WKUP_EMASK_OFFSET,
+		.weint_pend	= EXYNOS_WKUP_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.label		= "exynos5420-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos5420_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks1),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl1",
+	}, {
+		/* pin-controller instance 2 data */
+		.pin_banks	= exynos5420_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks2),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl2",
+	}, {
+		/* pin-controller instance 3 data */
+		.pin_banks	= exynos5420_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks3),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl3",
+	}, {
+		/* pin-controller instance 4 data */
+		.pin_banks	= exynos5420_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks4),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl4",
+	},
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index e67ff1b8042..0a6c720b665 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -1113,6 +1113,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = (void *)exynos4x12_pin_ctrl },
 	{ .compatible = "samsung,exynos5250-pinctrl",
 		.data = (void *)exynos5250_pin_ctrl },
+	{ .compatible = "samsung,exynos5420-pinctrl",
+		.data = (void *)exynos5420_pin_ctrl },
 #endif
 #ifdef CONFIG_PINCTRL_S3C64XX
 	{ .compatible = "samsung,s3c64xx-pinctrl",
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index 79fcc2076c0..11bb75ba81a 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -254,6 +254,7 @@ struct samsung_pmx_func {
 extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5420_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index b11e99797fd..2c6cfb3cf03 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -408,9 +408,9 @@ static void msm_init_clock(struct uart_port *port)
 {
 	struct msm_port *msm_port = UART_TO_MSM(port);
 
-	clk_enable(msm_port->clk);
+	clk_prepare_enable(msm_port->clk);
 	if (!IS_ERR(msm_port->pclk))
-		clk_enable(msm_port->pclk);
+		clk_prepare_enable(msm_port->pclk);
 	msm_serial_set_mnd_regs(port);
 }
 
@@ -486,7 +486,7 @@ static void msm_shutdown(struct uart_port *port)
 	msm_port->imr = 0;
 	msm_write(port, 0, UART_IMR); /* disable interrupts */
 
-	clk_disable(msm_port->clk);
+	clk_disable_unprepare(msm_port->clk);
 
 	free_irq(port->irq, port);
 }
@@ -688,14 +688,14 @@ static void msm_power(struct uart_port *port, unsigned int state,
 
 	switch (state) {
 	case 0:
-		clk_enable(msm_port->clk);
+		clk_prepare_enable(msm_port->clk);
 		if (!IS_ERR(msm_port->pclk))
-			clk_enable(msm_port->pclk);
+			clk_prepare_enable(msm_port->pclk);
 		break;
 	case 3:
-		clk_disable(msm_port->clk);
+		clk_disable_unprepare(msm_port->clk);
 		if (!IS_ERR(msm_port->pclk))
-			clk_disable(msm_port->pclk);
+			clk_disable_unprepare(msm_port->pclk);
 		break;
 	default:
 		printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state);
@@ -884,19 +884,22 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 		msm_port->is_uartdm = 0;
 
 	if (msm_port->is_uartdm) {
-		msm_port->clk = clk_get(&pdev->dev, "gsbi_uart_clk");
-		msm_port->pclk = clk_get(&pdev->dev, "gsbi_pclk");
+		msm_port->clk = devm_clk_get(&pdev->dev, "gsbi_uart_clk");
+		msm_port->pclk = devm_clk_get(&pdev->dev, "gsbi_pclk");
 	} else {
-		msm_port->clk = clk_get(&pdev->dev, "uart_clk");
+		msm_port->clk = devm_clk_get(&pdev->dev, "uart_clk");
 		msm_port->pclk = ERR_PTR(-ENOENT);
 	}
 
-	if (unlikely(IS_ERR(msm_port->clk) || (IS_ERR(msm_port->pclk) &&
-					       msm_port->is_uartdm)))
-			return PTR_ERR(msm_port->clk);
+	if (IS_ERR(msm_port->clk))
+		return PTR_ERR(msm_port->clk);
+
+	if (msm_port->is_uartdm) {
+		if (IS_ERR(msm_port->pclk))
+			return PTR_ERR(msm_port->pclk);
 
-	if (msm_port->is_uartdm)
 		clk_set_rate(msm_port->clk, 1843200);
+	}
 
 	port->uartclk = clk_get_rate(msm_port->clk);
 	printk(KERN_INFO "uartclk = %d\n", port->uartclk);
@@ -919,9 +922,9 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 
 static int msm_serial_remove(struct platform_device *pdev)
 {
-	struct msm_port *msm_port = platform_get_drvdata(pdev);
+	struct uart_port *port = platform_get_drvdata(pdev);
 
-	clk_put(msm_port->clk);
+	uart_remove_one_port(&msm_uart_driver, port);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 81ebc86a9e2..376079b9bd7 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1713,9 +1713,7 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
 #define S5PV210_SERIAL_DRV_DATA	(kernel_ulong_t)NULL
 #endif
 
-#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \
-	defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) || \
-	defined(CONFIG_SOC_EXYNOS5440)
+#if defined(CONFIG_ARCH_EXYNOS)
 static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
 	.info = &(struct s3c24xx_uart_info) {
 		.name		= "Samsung Exynos4 UART",
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 15641861994..7477e0ea5cd 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -146,6 +146,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -165,6 +166,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -183,6 +185,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -201,6 +204,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x3c, 16 },
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -220,6 +224,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -238,6 +243,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -256,6 +262,26 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= { 0x20, 16 },
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
+	},
+
+	/*
+	 * Common HSCIF definitions.
+	 */
+	[SCIx_HSCIF_REGTYPE] = {
+		[SCSMR]		= { 0x00, 16 },
+		[SCBRR]		= { 0x04,  8 },
+		[SCSCR]		= { 0x08, 16 },
+		[SCxTDR]	= { 0x0c,  8 },
+		[SCxSR]		= { 0x10, 16 },
+		[SCxRDR]	= { 0x14,  8 },
+		[SCFCR]		= { 0x18, 16 },
+		[SCFDR]		= { 0x1c, 16 },
+		[SCTFDR]	= sci_reg_invalid,
+		[SCRFDR]	= sci_reg_invalid,
+		[SCSPTR]	= { 0x20, 16 },
+		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= { 0x40, 16 },
 	},
 
 	/*
@@ -275,6 +301,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= { 0x24, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -294,6 +321,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= { 0x20, 16 },
 		[SCSPTR]	= { 0x24, 16 },
 		[SCLSR]		= { 0x28, 16 },
+		[HSSRR]		= sci_reg_invalid,
 	},
 
 	/*
@@ -313,6 +341,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
 		[SCRFDR]	= sci_reg_invalid,
 		[SCSPTR]	= sci_reg_invalid,
 		[SCLSR]		= sci_reg_invalid,
+		[HSSRR]		= sci_reg_invalid,
 	},
 };
 
@@ -374,6 +403,9 @@ static int sci_probe_regmap(struct plat_sci_port *cfg)
 		 */
 		cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
 		break;
+	case PORT_HSCIF:
+		cfg->regtype = SCIx_HSCIF_REGTYPE;
+		break;
 	default:
 		printk(KERN_ERR "Can't probe register map for given port\n");
 		return -EINVAL;
@@ -1798,6 +1830,42 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 	return ((freq + 16 * bps) / (32 * bps) - 1);
 }
 
+/* calculate sample rate, BRR, and clock select for HSCIF */
+static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
+				int *brr, unsigned int *srr,
+				unsigned int *cks)
+{
+	int sr, c, br, err;
+	int min_err = 1000; /* 100% */
+
+	/* Find the combination of sample rate and clock select with the
+	   smallest deviation from the desired baud rate. */
+	for (sr = 8; sr <= 32; sr++) {
+		for (c = 0; c <= 3; c++) {
+			/* integerized formulas from HSCIF documentation */
+			br = freq / (sr * (1 << (2 * c + 1)) * bps) - 1;
+			if (br < 0 || br > 255)
+				continue;
+			err = freq / ((br + 1) * bps * sr *
+			      (1 << (2 * c + 1)) / 1000) - 1000;
+			if (min_err > err) {
+				min_err = err;
+				*brr = br;
+				*srr = sr - 1;
+				*cks = c;
+			}
+		}
+	}
+
+	if (min_err == 1000) {
+		WARN_ON(1);
+		/* use defaults */
+		*brr = 255;
+		*srr = 15;
+		*cks = 0;
+	}
+}
+
 static void sci_reset(struct uart_port *port)
 {
 	struct plat_sci_reg *reg;
@@ -1819,8 +1887,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 {
 	struct sci_port *s = to_sci_port(port);
 	struct plat_sci_reg *reg;
-	unsigned int baud, smr_val, max_baud, cks;
+	unsigned int baud, smr_val, max_baud, cks = 0;
 	int t = -1;
+	unsigned int srr = 15;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
@@ -1833,8 +1902,17 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	max_baud = port->uartclk ? port->uartclk / 16 : 115200;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
-	if (likely(baud && port->uartclk))
-		t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk);
+	if (likely(baud && port->uartclk)) {
+		if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
+			sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
+					    &cks);
+		} else {
+			t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
+					   port->uartclk);
+			for (cks = 0; t >= 256 && cks <= 3; cks++)
+				t >>= 2;
+		}
+	}
 
 	sci_port_enable(s);
 
@@ -1853,15 +1931,15 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	for (cks = 0; t >= 256 && cks <= 3; cks++)
-		t >>= 2;
-
 	dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
 		__func__, smr_val, cks, t, s->cfg->scscr);
 
 	if (t >= 0) {
 		serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
 		serial_port_out(port, SCBRR, t);
+		reg = sci_getreg(port, HSSRR);
+		if (reg->size)
+			serial_port_out(port, HSSRR, srr | HSCIF_SRE);
 		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
 	} else
 		serial_port_out(port, SCSMR, smr_val);
@@ -1947,6 +2025,8 @@ static const char *sci_type(struct uart_port *port)
 		return "scifa";
 	case PORT_SCIFB:
 		return "scifb";
+	case PORT_HSCIF:
+		return "hscif";
 	}
 
 	return NULL;
@@ -1960,7 +2040,10 @@ static inline unsigned long sci_port_size(struct uart_port *port)
 	 * from platform resource data at such a time that ports begin to
 	 * behave more erratically.
 	 */
-	return 64;
+	if (port->type == PORT_HSCIF)
+		return 96;
+	else
+		return 64;
 }
 
 static int sci_remap_port(struct uart_port *port)
@@ -2085,6 +2168,9 @@ static int sci_init_single(struct platform_device *dev,
 	case PORT_SCIFB:
 		port->fifosize = 256;
 		break;
+	case PORT_HSCIF:
+		port->fifosize = 128;
+		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
 		break;
@@ -2325,7 +2411,7 @@ static inline int sci_probe_earlyprintk(struct platform_device *pdev)
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
 static char banner[] __initdata =
-	KERN_INFO "SuperH SCI(F) driver initialized\n";
+	KERN_INFO "SuperH (H)SCI(F) driver initialized\n";
 
 static struct uart_driver sci_uart_driver = {
 	.owner		= THIS_MODULE,
@@ -2484,4 +2570,4 @@ module_exit(sci_exit);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:sh-sci");
 MODULE_AUTHOR("Paul Mundt");
-MODULE_DESCRIPTION("SuperH SCI(F) serial driver");
+MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver");
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 749fbf41fb6..d08f33435e9 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -514,13 +514,13 @@ static int msm_otg_suspend(struct msm_otg *motg)
 			motg->pdata->otg_control == OTG_PMIC_CONTROL)
 		writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL);
 
-	clk_disable(motg->pclk);
-	clk_disable(motg->clk);
+	clk_disable_unprepare(motg->pclk);
+	clk_disable_unprepare(motg->clk);
 	if (motg->core_clk)
-		clk_disable(motg->core_clk);
+		clk_disable_unprepare(motg->core_clk);
 
 	if (!IS_ERR(motg->pclk_src))
-		clk_disable(motg->pclk_src);
+		clk_disable_unprepare(motg->pclk_src);
 
 	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
 			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -552,12 +552,12 @@ static int msm_otg_resume(struct msm_otg *motg)
 		return 0;
 
 	if (!IS_ERR(motg->pclk_src))
-		clk_enable(motg->pclk_src);
+		clk_prepare_enable(motg->pclk_src);
 
-	clk_enable(motg->pclk);
-	clk_enable(motg->clk);
+	clk_prepare_enable(motg->pclk);
+	clk_prepare_enable(motg->clk);
 	if (motg->core_clk)
-		clk_enable(motg->core_clk);
+		clk_prepare_enable(motg->core_clk);
 
 	if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
 			motg->pdata->otg_control == OTG_PMIC_CONTROL) {
@@ -1468,7 +1468,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
 		if (IS_ERR(motg->pclk_src))
 			goto put_clk;
 		clk_set_rate(motg->pclk_src, INT_MAX);
-		clk_enable(motg->pclk_src);
+		clk_prepare_enable(motg->pclk_src);
 	} else
 		motg->pclk_src = ERR_PTR(-ENOENT);
 
@@ -1511,8 +1511,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
 		goto free_regs;
 	}
 
-	clk_enable(motg->clk);
-	clk_enable(motg->pclk);
+	clk_prepare_enable(motg->clk);
+	clk_prepare_enable(motg->pclk);
 
 	ret = msm_hsusb_init_vddcx(motg, 1);
 	if (ret) {
@@ -1532,7 +1532,7 @@ static int __init msm_otg_probe(struct platform_device *pdev)
 	}
 
 	if (motg->core_clk)
-		clk_enable(motg->core_clk);
+		clk_prepare_enable(motg->core_clk);
 
 	writel(0, USB_USBINTR);
 	writel(0, USB_OTGSC);
@@ -1579,8 +1579,8 @@ static int __init msm_otg_probe(struct platform_device *pdev)
 free_irq:
 	free_irq(motg->irq, motg);
 disable_clks:
-	clk_disable(motg->pclk);
-	clk_disable(motg->clk);
+	clk_disable_unprepare(motg->pclk);
+	clk_disable_unprepare(motg->clk);
 ldo_exit:
 	msm_hsusb_ldo_init(motg, 0);
 vddcx_exit:
@@ -1593,7 +1593,7 @@ put_core_clk:
 	clk_put(motg->pclk);
 put_pclk_src:
 	if (!IS_ERR(motg->pclk_src)) {
-		clk_disable(motg->pclk_src);
+		clk_disable_unprepare(motg->pclk_src);
 		clk_put(motg->pclk_src);
 	}
 put_clk:
@@ -1643,12 +1643,12 @@ static int msm_otg_remove(struct platform_device *pdev)
 	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
 		dev_err(phy->dev, "Unable to suspend PHY\n");
 
-	clk_disable(motg->pclk);
-	clk_disable(motg->clk);
+	clk_disable_unprepare(motg->pclk);
+	clk_disable_unprepare(motg->clk);
 	if (motg->core_clk)
-		clk_disable(motg->core_clk);
+		clk_disable_unprepare(motg->core_clk);
 	if (!IS_ERR(motg->pclk_src)) {
-		clk_disable(motg->pclk_src);
+		clk_disable_unprepare(motg->pclk_src);
 		clk_put(motg->pclk_src);
 	}
 	msm_hsusb_ldo_init(motg, 0);
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index eb763adf981..d34049712a4 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -5,7 +5,7 @@
 #include <linux/sh_dma.h>
 
 /*
- * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
+ * Generic header for SuperH (H)SCI(F) (used by sh/sh64/h8300 and related parts)
  */
 
 #define SCIx_NOT_SUPPORTED	(-1)
@@ -16,6 +16,7 @@ enum {
 	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
 	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
 	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
+	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
 #define SCSCR_TIE	(1 << 7)
@@ -37,7 +38,7 @@ enum {
 
 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
 
-/* SCxSR SCIF */
+/* SCxSR SCIF, HSCIF */
 #define SCIF_ER    0x0080
 #define SCIF_TEND  0x0040
 #define SCIF_TDFE  0x0020
@@ -55,6 +56,9 @@ enum {
 #define SCSPTR_SPB2IO	(1 << 1)
 #define SCSPTR_SPB2DT	(1 << 0)
 
+/* HSSRR HSCIF */
+#define HSCIF_SRE	0x8000
+
 /* Offsets into the sci_port->irqs array */
 enum {
 	SCIx_ERI_IRQ,
@@ -90,6 +94,7 @@ enum {
 	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 	SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH7705_SCIF_REGTYPE,
+	SCIx_HSCIF_REGTYPE,
 
 	SCIx_NR_REGTYPES,
 };
@@ -115,6 +120,7 @@ enum {
 	SCSMR, SCBRR, SCSCR, SCxSR,
 	SCFCR, SCFDR, SCxTDR, SCxRDR,
 	SCLSR, SCTFDR, SCRFDR, SCSPTR,
+	HSSRR,
 
 	SCIx_NR_REGS,
 };
@@ -137,7 +143,7 @@ struct plat_sci_port {
 	unsigned long	mapbase;		/* resource base */
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
-	unsigned int	type;			/* SCI / SCIF / IRDA */
+	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
 	unsigned long	capabilities;		/* Port features/capabilities */
 
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index c8eaeb5465e..9119cc0977b 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -229,4 +229,7 @@
 /* Freescale lpuart */
 #define PORT_LPUART	103
 
+/* SH-SCI */
+#define PORT_HSCIF	104
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */