aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-04-19 13:35:57 +0200
committerArnd Bergmann <arnd@arndb.de>2013-04-19 14:33:09 +0200
commit56b690481c4baed815b9e4acf5ea89eadb58ba17 (patch)
treea543108af0789de129150ec4662230eeafeae877
parent408e713545ca0bebe6034935c65e7e95c70d253b (diff)
parentbd51de53e1be9896d815bbea30560262216d4616 (diff)
Merge branch 'samsung/exynos-multiplatform' into next/multiplatform
These patches get us closer to adding multiplatform support on the Exynos platform, they are part of a longer series of patches. This would get all the simple stuff out of the way, and I don't think there is a big risk of introducing regressions with these. A lot of the other patches have already been merged into subsystem trees. After this series in in arm-soc, what is left comes down to * The ASoC conversion to dmaengine won't make it unless someone who knows that code better steps up to do it right away. This means that we won't have audio in a 3.10 multiplatform kernel on Exynos, but it will still work for users that don't enable multiplatform. * The irqchip (combiner), clk and clksource patches are all based on top of other changesets we pulled in from your trees, so I would not make them part of the next/multiplatform branch. We can apply them on top of the next/drivers branch once they are tested successfully. * A trivial patch is needed in the end to actually make CONFIG_ARCH_EXYNOS visible in multiplatform configurations. We will do that as a separate patch once everything else is there. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-rw-r--r--arch/arm/Kconfig9
-rw-r--r--arch/arm/Kconfig.debug8
-rw-r--r--arch/arm/configs/exynos4_defconfig2
-rw-r--r--arch/arm/include/debug/exynos.S (renamed from arch/arm/mach-exynos/include/mach/debug-macro.S)12
-rw-r--r--arch/arm/include/debug/samsung.S (renamed from arch/arm/plat-samsung/include/plat/debug-macro.S)0
-rw-r--r--arch/arm/mach-exynos/Kconfig40
-rw-r--r--arch/arm/mach-exynos/Makefile5
-rw-r--r--arch/arm/mach-exynos/common.c6
-rw-r--r--arch/arm/mach-exynos/dev-uart.c1
-rw-r--r--arch/arm/mach-exynos/include/mach/irqs.h5
-rw-r--r--arch/arm/mach-exynos/mach-armlex4210.c1
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c1
-rw-r--r--arch/arm/mach-exynos/mach-origen.c1
-rw-r--r--arch/arm/mach-exynos/mach-smdk4x12.c1
-rw-r--r--arch/arm/mach-exynos/mach-smdkv310.c1
-rw-r--r--arch/arm/mach-exynos/setup-sdhci-gpio.c2
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-s3c64xx/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-s5pc100/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci-gpio.c1
-rw-r--r--arch/arm/mach-s5pv210/include/mach/debug-macro.S2
-rw-r--r--arch/arm/mach-s5pv210/setup-sdhci-gpio.c1
-rw-r--r--arch/arm/plat-samsung/Kconfig7
-rw-r--r--arch/arm/plat-samsung/Makefile8
-rw-r--r--arch/arm/plat-samsung/devs.c45
-rw-r--r--arch/arm/plat-samsung/include/plat/pm.h5
-rw-r--r--arch/arm/plat-samsung/include/plat/sdhci.h56
-rw-r--r--arch/arm/plat-samsung/irq-vic-timer.c1
-rw-r--r--arch/arm/plat-samsung/pm.c1
-rw-r--r--arch/arm/plat-samsung/s5p-dev-mfc.c42
-rw-r--r--arch/arm/plat-samsung/s5p-irq.c1
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/mmc/host/Kconfig2
-rw-r--r--drivers/mmc/host/sdhci-s3c-regs.h (renamed from arch/arm/plat-samsung/include/plat/regs-sdhci.h)0
-rw-r--r--drivers/mmc/host/sdhci-s3c.c5
-rw-r--r--drivers/mtd/onenand/samsung.c4
-rw-r--r--drivers/mtd/onenand/samsung.h (renamed from arch/arm/plat-samsung/include/plat/regs-onenand.h)2
-rw-r--r--drivers/rtc/rtc-s3c.c3
-rw-r--r--drivers/rtc/rtc-s3c.h (renamed from arch/arm/plat-samsung/include/plat/regs-rtc.h)3
-rw-r--r--drivers/thermal/exynos_thermal.c2
-rw-r--r--include/linux/platform_data/mmc-sdhci-s3c.h56
42 files changed, 203 insertions, 149 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 88b662d4618..21a48d1bde4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -776,18 +776,11 @@ config ARCH_S5PV210
help
Samsung S5PV210/S5PC110 series based systems
-config ARCH_EXYNOS
+config ARCH_EXYNOS_SINGLE
bool "Samsung EXYNOS"
- select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
- select HAVE_S3C_RTC if RTC_CLASS
select NEED_MACH_GPIO_H
select NEED_MACH_MEMORY_H
help
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e00bd4d4ab6..54d6fdc03e0 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -348,6 +348,7 @@ choice
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -359,6 +360,7 @@ choice
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -370,6 +372,7 @@ choice
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -381,6 +384,7 @@ choice
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART
bool "Use S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@@ -510,6 +514,9 @@ choice
endchoice
+config DEBUG_EXYNOS_UART
+ bool
+
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
@@ -607,6 +614,7 @@ config DEBUG_LL_INCLUDE
string
default "debug/bcm2835.S" if DEBUG_BCM2835
default "debug/cns3xxx.S" if DEBUG_CNS3XXX
+ default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index bffe68e190a..ae90a0f7d53 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -4,7 +4,7 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_EXYNOS_SINGLE=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
CONFIG_MACH_ARMLEX4210=y
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/include/debug/exynos.S
index e0c86ea475e..b17fdb7fbd3 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/exynos.S
@@ -1,10 +1,7 @@
-/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
- *
+/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
@@ -12,7 +9,10 @@
/* pull in the relevant register and map files. */
-#include <mach/map.h>
+#define S3C_ADDR_BASE 0xF6000000
+#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000
+#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS5_PA_UART 0x12C00000
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
@@ -36,4 +36,4 @@
#define fifo_full fifo_full_s5pv210
#define fifo_level fifo_level_s5pv210
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/include/debug/samsung.S
index f3a9cff6d5d..f3a9cff6d5d 100644
--- a/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ b/arch/arm/include/debug/samsung.S
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 54cf73e7a79..9cfbb33a9ee 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -7,6 +7,20 @@
# Configuration options for the EXYNOS4
+config ARCH_EXYNOS
+ # TODO: make this visible after all drivers are converted
+ bool "Samsung EXYNOS" if ARCH_MULTI_V7 && BROKEN
+ default ARCH_EXYNOS_SINGLE
+ select ARCH_HAS_CPUFREQ
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select HAVE_S3C2410_I2C if I2C
+ select HAVE_S3C_RTC if RTC_CLASS
+ help
+ Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
+
if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
@@ -20,6 +34,9 @@ config ARCH_EXYNOS4
help
Samsung EXYNOS4 SoCs based systems
+config ARCH_EXYNOS4_SINGLE
+ def_bool ARCH_EXYNOS4 && ARCH_EXYNOS_SINGLE
+
config ARCH_EXYNOS5
bool "SAMSUNG EXYNOS5"
select HAVE_ARM_SCU if SMP
@@ -37,7 +54,7 @@ config CPU_EXYNOS4210
select PM_GENERIC_DOMAINS
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4210 CPU support
@@ -47,7 +64,7 @@ config SOC_EXYNOS4212
depends on ARCH_EXYNOS4
select S5P_PM if PM
select S5P_SLEEP if PM
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4212 SoC support
@@ -55,7 +72,7 @@ config SOC_EXYNOS4412
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS4412 SoC support
@@ -66,7 +83,7 @@ config SOC_EXYNOS5250
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
- select SAMSUNG_DMADEV
+ select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE
help
Enable EXYNOS5250 SoC support
@@ -87,6 +104,19 @@ config EXYNOS4_MCT
help
Use MCT (Multi Core Timer) as kernel timers
+config EXYNOS_ATAGS
+ bool "ATAGS based boot for EXYNOS (deprecated)"
+ depends on !ARCH_MULTIPLATFORM
+ depends on ATAGS
+ default y
+ help
+ The EXYNOS platform is moving towards being completely probed
+ through device tree. This enables support for board files using
+ the traditional ATAGS boot format.
+ Note that this option is not available for multiplatform builds.
+
+if EXYNOS_ATAGS
+
config EXYNOS_DEV_DMA
bool
help
@@ -402,6 +432,8 @@ config MACH_SMDK4412
Machine support for Samsung SMDK4412
endif
+endif
+
comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 435757e57bb..57e9124d95e 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -4,6 +4,7 @@
# http://www.samsung.com/
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
obj-y :=
obj-m :=
@@ -48,12 +49,12 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
# device support
obj-y += dev-uart.o
-obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
+obj-$(CONFIG_ARCH_EXYNOS4_SINGLE) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
-obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS_SINGLE) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index d63d399c7ba..83bd3f0e151 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -368,6 +368,9 @@ static void __init exynos4_map_io(void)
else
iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+ if (!IS_ENABLED(CONFIG_EXYNOS_ATAGS))
+ return
+
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
@@ -570,6 +573,8 @@ static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
+
+#ifdef CONFIG_EXYNOS_ATAGS
static void __iomem *exynos_eint_base;
static DEFINE_SPINLOCK(eint_lock);
@@ -875,3 +880,4 @@ static int __init exynos_init_irq_eint(void)
return 0;
}
arch_initcall(exynos_init_irq_eint);
+#endif
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
index 7c42f4b7c8b..c48aff02c78 100644
--- a/arch/arm/mach-exynos/dev-uart.c
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -20,6 +20,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 1f4dc35cd4b..8bd5dde5fc7 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -466,7 +466,10 @@
#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
/* Set the default NR_IRQS */
+#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
-#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+#ifndef CONFIG_SPARSE_IRQ
+#define NR_IRQS EXYNOS_NR_IRQS
+#endif
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index 685f29173af..2126f3503a3 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -25,6 +25,7 @@
#include <plat/regs-srom.h>
#include <plat/sdhci.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 1ea79730187..ab920e34bd0 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -53,6 +53,7 @@
#include <plat/fimc-core.h>
#include <plat/camport.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include "common.h"
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 579d2d171da..f23ce40139c 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -46,6 +46,7 @@
#include <plat/hdmi.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <drm/exynos_drm.h>
#include "common.h"
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fe6149624b8..5df91236dbb 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -39,6 +39,7 @@
#include <plat/regs-serial.h>
#include <plat/sdhci.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index d71672922b1..9a1d3596d4c 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/hdmi.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c
index e8d08bf8965..d5b98c86673 100644
--- a/arch/arm/mach-exynos/setup-sdhci-gpio.c
+++ b/arch/arm/mach-exynos/setup-sdhci-gpio.c
@@ -19,8 +19,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
index 13ed33c6911..2558952e314 100644
--- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
@@ -98,4 +98,4 @@
/* include the reset of the code which will do the work */
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index c0c076a90f2..dd9ccca5de1 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -35,4 +35,4 @@
* will be fine with us.
*/
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index e80ba3c6981..5e2916fb19a 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -30,4 +30,4 @@
#endif
.endm
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 694f7593700..66cb7f16bf2 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -36,4 +36,4 @@
* will be fine with us.
*/
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 03c02d04c68..6010c0310cb 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -19,7 +19,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 79e55597ab6..80c21996c94 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -38,4 +38,4 @@
* will be fine with us.
*/
-#include <plat/debug-macro.S>
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index 3e3ac05bb7b..0512ada0052 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -20,7 +20,6 @@
#include <linux/mmc/card.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index a9d52167e16..8aae6816ebc 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -13,6 +13,10 @@ config PLAT_SAMSUNG
help
Base platform code for all Samsung SoC based systems
+config PLAT_SAMSUNG_SINGLE
+ def_bool PLAT_SAMSUNG && !ARCH_MULTIPLATFORM
+
+
config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
@@ -23,7 +27,7 @@ config PLAT_S5P
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select PLAT_SAMSUNG
- select S3C_GPIO_TRACK
+ select S3C_GPIO_TRACK if PLAT_SAMSUNG_SINGLE
select S5P_GPIO_DRVSTR
select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
@@ -178,6 +182,7 @@ config S5P_DEV_UART
config S3C_ADC
bool "ADC common driver support"
+ depends on PLAT_SAMSUNG_SINGLE
help
Core support for the ADC block found in the Samsung SoC systems
for drivers such as the touchscreen and hwmon to use to share
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 3a7c64d1814..cf684b2eb6f 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,6 +4,9 @@
#
# Licensed under GPLv2
+ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include
+
obj-y :=
obj-m :=
obj-n := dummy.o
@@ -34,7 +37,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o
obj-y += platformdata.o
-obj-y += devs.o
+obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += devs.o
obj-y += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o
@@ -51,9 +54,10 @@ obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
-
obj-$(CONFIG_PM) += pm.o
+ifdef CONFIG_PLAT_SAMSUNG_SINGLE
obj-$(CONFIG_PM) += pm-gpio.o
+endif
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 51afedda9ab..de9ad27495e 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -878,51 +878,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
}
#endif /* CONFIG_PLAT_S3C24XX */
-/* MFC */
-
-#ifdef CONFIG_S5P_DEV_MFC
-static struct resource s5p_mfc_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
- [1] = DEFINE_RES_IRQ(IRQ_MFC),
-};
-
-struct platform_device s5p_device_mfc = {
- .name = "s5p-mfc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s5p_mfc_resource),
- .resource = s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-struct platform_device s5p_device_mfc_l = {
- .name = "s5p-mfc-l",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device s5p_device_mfc_r = {
- .name = "s5p-mfc-r",
- .id = -1,
- .dev = {
- .parent = &s5p_device_mfc.dev,
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-#endif /* CONFIG_S5P_DEV_MFC */
-
/* MIPI CSIS */
#ifdef CONFIG_S5P_DEV_CSIS0
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index f6fcadeee96..266a4e3e245 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void);
*/
extern void s3c_pm_configure_extint(void);
+#ifdef CONFIG_PLAT_SAMSUNG_SINGLE
/**
* samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
*
@@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void);
* Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
*/
extern void samsung_pm_save_gpios(void);
+#else
+#define samsung_pm_restore_gpios() do { } while(0)
+#define samsung_pm_save_gpios() do { } while(0)
+#endif
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 9b87f38fc4f..1e0aab08c13 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -18,62 +18,9 @@
#ifndef __PLAT_S3C_SDHCI_H
#define __PLAT_S3C_SDHCI_H __FILE__
+#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <plat/devs.h>
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-enum cd_types {
- S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
- S3C_SDHCI_CD_EXTERNAL, /* use external callback */
- S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
- S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
- S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
-};
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @host_caps2: The second standard MMC host capabilities bit field.
- * @cd_type: Type of Card Detection method (see cd_types enum above)
- * @ext_cd_init: Initialize external card detect subsystem. Called on
- * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is a callback to the sdhci-s3c driver
- * that triggers the card detection event. Callback arguments:
- * dev is pointer to platform device of the host controller,
- * state is new state of the card (0 - removed, 1 - inserted).
- * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
- * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
- * notify_func argument is the same callback as for ext_cd_init.
- * @ext_cd_gpio: gpio pin used for external CD line, valid only if
- * cd_type == S3C_SDHCI_CD_GPIO
- * @ext_cd_gpio_invert: invert values for external CD gpio line
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
- unsigned int max_width;
- unsigned int host_caps;
- unsigned int host_caps2;
- unsigned int pm_caps;
- enum cd_types cd_type;
-
- int ext_cd_gpio;
- bool ext_cd_gpio_invert;
- int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
- int state));
- int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
- int state));
-
- void (*cfg_gpio)(struct platform_device *dev, int width);
-};
-
/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
* @pd: The default platform data for this device.
* @set: Pointer to the platform data to fill in.
@@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name)
break;
}
}
-
#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index f980cf3d2ba..1113066240c 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 002b1472293..53210ec4e8e 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -27,6 +27,7 @@
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-irq.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <plat/pm.h>
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
index 5ec104b5408..a93fb6fb660 100644
--- a/arch/arm/plat-samsung/s5p-dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -18,10 +18,50 @@
#include <linux/of.h>
#include <mach/map.h>
+#include <mach/irqs.h>
#include <plat/devs.h>
-#include <plat/irqs.h>
#include <plat/mfc.h>
+static struct resource s5p_mfc_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
+ [1] = DEFINE_RES_IRQ(IRQ_MFC),
+};
+
+struct platform_device s5p_device_mfc = {
+ .name = "s5p-mfc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p_mfc_resource),
+ .resource = s5p_mfc_resource,
+};
+
+/*
+ * MFC hardware has 2 memory interfaces which are modelled as two separate
+ * platform devices to let dma-mapping distinguish between them.
+ *
+ * MFC parent device (s5p_device_mfc) must be registered before memory
+ * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
+ */
+
+struct platform_device s5p_device_mfc_l = {
+ .name = "s5p-mfc-l",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device s5p_device_mfc_r = {
+ .name = "s5p-mfc-r",
+ .id = -1,
+ .dev = {
+ .parent = &s5p_device_mfc.dev,
+ .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
struct s5p_mfc_reserved_mem {
phys_addr_t base;
unsigned long size;
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index 103e371f5e3..ff1a76011b1 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/irqchip/arm-vic.h>
+#include <mach/irqs.h>
#include <mach/map.h>
#include <plat/regs-timer.h>
#include <plat/cpu.h>
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 22e07bc9fcb..6c16050d157 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -57,7 +57,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
-obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
+obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index d88219e1d86..d0547448606 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -180,7 +180,7 @@ config MMC_SDHCI_TEGRA
config MMC_SDHCI_S3C
tristate "SDHCI support on Samsung S3C SoC"
- depends on MMC_SDHCI && PLAT_SAMSUNG
+ depends on MMC_SDHCI && PLAT_SAMSUNG_SINGLE
help
This selects the Secure Digital Host Controller Interface (SDHCI)
often referrered to as the HSMMC block in some of the Samsung S3C
diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/drivers/mmc/host/sdhci-s3c-regs.h
index e34049ad44c..e34049ad44c 100644
--- a/arch/arm/plat-samsung/include/plat/regs-sdhci.h
+++ b/drivers/mmc/host/sdhci-s3c-regs.h
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 7363efe7228..e4f52b5c259 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -28,9 +29,7 @@
#include <linux/mmc/host.h>
-#include <plat/sdhci.h>
-#include <plat/regs-sdhci.h>
-
+#include "sdhci-s3c-regs.h"
#include "sdhci.h"
#define MAX_BUS_CLK (4)
diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 33f2a8fb8df..2cf74085f93 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -23,11 +23,11 @@
#include <linux/mtd/partitions.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <asm/mach/flash.h>
-#include <plat/regs-onenand.h>
-#include <linux/io.h>
+#include "samsung.h"
enum soc_type {
TYPE_S3C6400,
diff --git a/arch/arm/plat-samsung/include/plat/regs-onenand.h b/drivers/mtd/onenand/samsung.h
index 930ea8b88ed..c4a80e67e43 100644
--- a/arch/arm/plat-samsung/include/plat/regs-onenand.h
+++ b/drivers/mtd/onenand/samsung.h
@@ -11,8 +11,6 @@
#ifndef __SAMSUNG_ONENAND_H__
#define __SAMSUNG_ONENAND_H__
-#include <mach/hardware.h>
-
/*
* OneNAND Controller
*/
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index fb994e9ddc1..7995f79d07e 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -29,9 +29,8 @@
#include <linux/uaccess.h>
#include <linux/io.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/regs-rtc.h>
+#include "rtc-s3c.h"
enum s3c_cpu_type {
TYPE_S3C2410,
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/drivers/rtc/rtc-s3c.h
index 0f8263e93ee..004b61a8343 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/drivers/rtc/rtc-s3c.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
- *
+/*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index 46568c078de..b777ae6f0a8 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -39,8 +39,6 @@
#include <linux/cpu_cooling.h>
#include <linux/of.h>
-#include <plat/cpu.h>
-
/* Exynos generic registers */
#define EXYNOS_TMU_REG_TRIMINFO 0x0
#define EXYNOS_TMU_REG_CONTROL 0x20
diff --git a/include/linux/platform_data/mmc-sdhci-s3c.h b/include/linux/platform_data/mmc-sdhci-s3c.h
new file mode 100644
index 00000000000..249f02387a3
--- /dev/null
+++ b/include/linux/platform_data/mmc-sdhci-s3c.h
@@ -0,0 +1,56 @@
+#ifndef __PLATFORM_DATA_SDHCI_S3C_H
+#define __PLATFORM_DATA_SDHCI_S3C_H
+
+struct platform_device;
+
+enum cd_types {
+ S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
+ S3C_SDHCI_CD_EXTERNAL, /* use external callback */
+ S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
+ S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
+ S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
+};
+
+/**
+ * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
+ * @max_width: The maximum number of data bits supported.
+ * @host_caps: Standard MMC host capabilities bit field.
+ * @host_caps2: The second standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is a callback to the sdhci-s3c driver
+ * that triggers the card detection event. Callback arguments:
+ * dev is pointer to platform device of the host controller,
+ * state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ * cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
+ * @cfg_gpio: Configure the GPIO for a specific card bit-width
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+ * card speed information.
+*/
+struct s3c_sdhci_platdata {
+ unsigned int max_width;
+ unsigned int host_caps;
+ unsigned int host_caps2;
+ unsigned int pm_caps;
+ enum cd_types cd_type;
+
+ int ext_cd_gpio;
+ bool ext_cd_gpio_invert;
+ int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
+ int state));
+ int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+ int state));
+
+ void (*cfg_gpio)(struct platform_device *dev, int width);
+};
+
+
+#endif /* __PLATFORM_DATA_SDHCI_S3C_H */