Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: Kconfig menu touch-up
  firewire: Kconfig menu touch-up
  firewire: deadline for PHY config transmission
  firewire: fw-ohci: unify printk prefixes
  firewire: fill_bus_reset_event needs lock protection
  firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID
  firewire: fw-ohci: disable PHY packet reception into AR context
  firewire: fw-ohci: use of uninitialized data in AR handler
  firewire: don't panic on invalid AR request buffer

5 files changed, 180 insertions, 141 deletions

diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index fb4d391810b..76f26710fc1 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -1,28 +1,26 @@
-comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
+comment "A new alternative FireWire stack is available with EXPERIMENTAL=y"
 	depends on EXPERIMENTAL=n
 
+comment "Enable only one of the two stacks, unless you know what you are doing"
+	depends on EXPERIMENTAL
+
 config FIREWIRE
-	tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL"
+	tristate "New FireWire stack, EXPERIMENTAL"
 	depends on EXPERIMENTAL
 	select CRC_ITU_T
 	help
 	  This is the "Juju" FireWire stack, a new alternative implementation
 	  designed for robustness and simplicity.  You can build either this
-	  stack, or the classic stack (the ieee1394 driver, ohci1394 etc.)
-	  or both.  Please read http://wiki.linux1394.org/JujuMigration before
-	  you enable the new stack.
+	  stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
+	  Please read http://wiki.linux1394.org/JujuMigration before you
+	  enable the new stack.
 
 	  To compile this driver as a module, say M here: the module will be
 	  called firewire-core.  It functionally replaces ieee1394, raw1394,
 	  and video1394.
 
-          NOTE:
-
-	  You should only build ONE of the stacks, unless you REALLY know what
-	  you are doing.
-
 config FIREWIRE_OHCI
-	tristate "Support for OHCI FireWire host controllers"
+	tristate "OHCI-1394 controllers"
 	depends on PCI && FIREWIRE
 	help
 	  Enable this driver if you have a FireWire controller based
@@ -33,12 +31,12 @@ config FIREWIRE_OHCI
 	  called firewire-ohci.  It replaces ohci1394 of the classic IEEE 1394
 	  stack.
 
-          NOTE:
+	  NOTE:
 
-	  You should only build ohci1394 or firewire-ohci, but not both.
-	  If you nevertheless want to install both, you should configure them
-	  only as modules and blacklist the driver(s) which you don't want to
-	  have auto-loaded.  Add either
+	  You should only build either firewire-ohci or the old ohci1394 driver,
+	  but not both.  If you nevertheless want to install both, you should
+	  configure them only as modules and blacklist the driver(s) which you
+	  don't want to have auto-loaded.  Add either
 
 	      blacklist firewire-ohci
 	  or
@@ -60,7 +58,7 @@ config FIREWIRE_OHCI_DEBUG
 	default y
 
 config FIREWIRE_SBP2
-	tristate "Support for storage devices (SBP-2 protocol driver)"
+	tristate "Storage devices (SBP-2 protocol)"
 	depends on FIREWIRE && SCSI
 	help
 	  This option enables you to use SBP-2 devices connected to a
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index dda14015e87..c639915fc3c 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -205,6 +205,7 @@ fw_device_op_read(struct file *file,
 	return dequeue_event(client, buffer, count);
 }
 
+/* caller must hold card->lock so that node pointers can be dereferenced here */
 static void
 fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
 		     struct client *client)
@@ -214,7 +215,6 @@ fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
 	event->closure	     = client->bus_reset_closure;
 	event->type          = FW_CDEV_EVENT_BUS_RESET;
 	event->generation    = client->device->generation;
-	smp_rmb();           /* node_id must not be older than generation */
 	event->node_id       = client->device->node_id;
 	event->local_node_id = card->local_node->node_id;
 	event->bm_node_id    = 0; /* FIXME: We don't track the BM. */
@@ -274,6 +274,7 @@ static int ioctl_get_info(struct client *client, void *buffer)
 {
 	struct fw_cdev_get_info *get_info = buffer;
 	struct fw_cdev_event_bus_reset bus_reset;
+	struct fw_card *card = client->device->card;
 	unsigned long ret = 0;
 
 	client->version = get_info->version;
@@ -299,13 +300,17 @@ static int ioctl_get_info(struct client *client, void *buffer)
 	client->bus_reset_closure = get_info->bus_reset_closure;
 	if (get_info->bus_reset != 0) {
 		void __user *uptr = u64_to_uptr(get_info->bus_reset);
+		unsigned long flags;
 
+		spin_lock_irqsave(&card->lock, flags);
 		fill_bus_reset_event(&bus_reset, client);
+		spin_unlock_irqrestore(&card->lock, flags);
+
 		if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset)))
 			return -EFAULT;
 	}
 
-	get_info->card = client->device->card->index;
+	get_info->card = card->index;
 
 	return 0;
 }
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 4f02c55f13e..0b66306af47 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -265,27 +265,25 @@ static void log_irqs(u32 evt)
 	    !(evt & OHCI1394_busReset))
 		return;
 
-	printk(KERN_DEBUG KBUILD_MODNAME ": IRQ "
-	       "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
-	       evt,
-	       evt & OHCI1394_selfIDComplete	? " selfID"		: "",
-	       evt & OHCI1394_RQPkt		? " AR_req"		: "",
-	       evt & OHCI1394_RSPkt		? " AR_resp"		: "",
-	       evt & OHCI1394_reqTxComplete	? " AT_req"		: "",
-	       evt & OHCI1394_respTxComplete	? " AT_resp"		: "",
-	       evt & OHCI1394_isochRx		? " IR"			: "",
-	       evt & OHCI1394_isochTx		? " IT"			: "",
-	       evt & OHCI1394_postedWriteErr	? " postedWriteErr"	: "",
-	       evt & OHCI1394_cycleTooLong	? " cycleTooLong"	: "",
-	       evt & OHCI1394_cycle64Seconds	? " cycle64Seconds"	: "",
-	       evt & OHCI1394_regAccessFail	? " regAccessFail"	: "",
-	       evt & OHCI1394_busReset		? " busReset"		: "",
-	       evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
-		       OHCI1394_RSPkt | OHCI1394_reqTxComplete |
-		       OHCI1394_respTxComplete | OHCI1394_isochRx |
-		       OHCI1394_isochTx | OHCI1394_postedWriteErr |
-		       OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
-		       OHCI1394_regAccessFail | OHCI1394_busReset)
+	fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+	    evt & OHCI1394_selfIDComplete	? " selfID"		: "",
+	    evt & OHCI1394_RQPkt		? " AR_req"		: "",
+	    evt & OHCI1394_RSPkt		? " AR_resp"		: "",
+	    evt & OHCI1394_reqTxComplete	? " AT_req"		: "",
+	    evt & OHCI1394_respTxComplete	? " AT_resp"		: "",
+	    evt & OHCI1394_isochRx		? " IR"			: "",
+	    evt & OHCI1394_isochTx		? " IT"			: "",
+	    evt & OHCI1394_postedWriteErr	? " postedWriteErr"	: "",
+	    evt & OHCI1394_cycleTooLong		? " cycleTooLong"	: "",
+	    evt & OHCI1394_cycle64Seconds	? " cycle64Seconds"	: "",
+	    evt & OHCI1394_regAccessFail	? " regAccessFail"	: "",
+	    evt & OHCI1394_busReset		? " busReset"		: "",
+	    evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
+		    OHCI1394_RSPkt | OHCI1394_reqTxComplete |
+		    OHCI1394_respTxComplete | OHCI1394_isochRx |
+		    OHCI1394_isochTx | OHCI1394_postedWriteErr |
+		    OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+		    OHCI1394_regAccessFail | OHCI1394_busReset)
 						? " ?"			: "");
 }
 
@@ -308,23 +306,22 @@ static void log_selfids(int node_id, int generation, int self_id_count, u32 *s)
 	if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS)))
 		return;
 
-	printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, "
-	       "local node ID %04x\n", self_id_count, generation, node_id);
+	fw_notify("%d selfIDs, generation %d, local node ID %04x\n",
+		  self_id_count, generation, node_id);
 
 	for (; self_id_count--; ++s)
 		if ((*s & 1 << 23) == 0)
-			printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] "
-			       "%s gc=%d %s %s%s%s\n",
-			       *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
-			       speed[*s >> 14 & 3], *s >> 16 & 63,
-			       power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
-			       *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
+			fw_notify("selfID 0: %08x, phy %d [%c%c%c] "
+			    "%s gc=%d %s %s%s%s\n",
+			    *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
+			    speed[*s >> 14 & 3], *s >> 16 & 63,
+			    power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
+			    *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
 		else
-			printk(KERN_DEBUG "selfID n: %08x, phy %d "
-			       "[%c%c%c%c%c%c%c%c]\n",
-			       *s, *s >> 24 & 63,
-			       _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
-			       _p(s,  8), _p(s,  6), _p(s,  4), _p(s,  2));
+			fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n",
+			    *s, *s >> 24 & 63,
+			    _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
+			    _p(s,  8), _p(s,  6), _p(s,  4), _p(s,  2));
 }
 
 static const char *evts[] = {
@@ -373,15 +370,14 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt)
 			evt = 0x1f;
 
 	if (evt == OHCI1394_evt_bus_reset) {
-		printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n",
-		       dir, (header[2] >> 16) & 0xff);
+		fw_notify("A%c evt_bus_reset, generation %d\n",
+		    dir, (header[2] >> 16) & 0xff);
 		return;
 	}
 
 	if (header[0] == ~header[1]) {
-		printk(KERN_DEBUG "A%c %s, %s, %08x\n",
-		       dir, evts[evt], phys[header[0] >> 30 & 0x3],
-		       header[0]);
+		fw_notify("A%c %s, %s, %08x\n",
+		    dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]);
 		return;
 	}
 
@@ -400,24 +396,23 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt)
 
 	switch (tcode) {
 	case 0xe: case 0xa:
-		printk(KERN_DEBUG "A%c %s, %s\n",
-		       dir, evts[evt], tcodes[tcode]);
+		fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]);
 		break;
 	case 0x0: case 0x1: case 0x4: case 0x5: case 0x9:
-		printk(KERN_DEBUG "A%c spd %x tl %02x, "
-		       "%04x -> %04x, %s, "
-		       "%s, %04x%08x%s\n",
-		       dir, speed, header[0] >> 10 & 0x3f,
-		       header[1] >> 16, header[0] >> 16, evts[evt],
-		       tcodes[tcode], header[1] & 0xffff, header[2], specific);
+		fw_notify("A%c spd %x tl %02x, "
+		    "%04x -> %04x, %s, "
+		    "%s, %04x%08x%s\n",
+		    dir, speed, header[0] >> 10 & 0x3f,
+		    header[1] >> 16, header[0] >> 16, evts[evt],
+		    tcodes[tcode], header[1] & 0xffff, header[2], specific);
 		break;
 	default:
-		printk(KERN_DEBUG "A%c spd %x tl %02x, "
-		       "%04x -> %04x, %s, "
-		       "%s%s\n",
-		       dir, speed, header[0] >> 10 & 0x3f,
-		       header[1] >> 16, header[0] >> 16, evts[evt],
-		       tcodes[tcode], specific);
+		fw_notify("A%c spd %x tl %02x, "
+		    "%04x -> %04x, %s, "
+		    "%s%s\n",
+		    dir, speed, header[0] >> 10 & 0x3f,
+		    header[1] >> 16, header[0] >> 16, evts[evt],
+		    tcodes[tcode], specific);
 	}
 }
 
@@ -548,6 +543,11 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 		p.header_length = 12;
 		p.payload_length = 0;
 		break;
+
+	default:
+		/* FIXME: Stop context, discard everything, and restart? */
+		p.header_length = 0;
+		p.payload_length = 0;
 	}
 
 	p.payload = (void *) buffer + p.header_length;
@@ -1468,6 +1468,9 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
 	reg_write(ohci, OHCI1394_HCControlClear,
 		  OHCI1394_HCControl_noByteSwapData);
 
+	reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+	reg_write(ohci, OHCI1394_LinkControlClear,
+		  OHCI1394_LinkControl_rcvPhyPkt);
 	reg_write(ohci, OHCI1394_LinkControlSet,
 		  OHCI1394_LinkControl_rcvSelfID |
 		  OHCI1394_LinkControl_cycleTimerEnable |
@@ -1481,7 +1484,6 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
 	ar_context_run(&ohci->ar_request_ctx);
 	ar_context_run(&ohci->ar_response_ctx);
 
-	reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
 	reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
 	reg_write(ohci, OHCI1394_IntEventClear, ~0);
 	reg_write(ohci, OHCI1394_IntMaskClear, ~0);
diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c
index ccf0e4cf108..03ae8a77c47 100644
--- a/drivers/firewire/fw-transaction.c
+++ b/drivers/firewire/fw-transaction.c
@@ -20,6 +20,7 @@
 
 #include <linux/completion.h>
 #include <linux/kernel.h>
+#include <linux/kref.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -297,37 +298,55 @@ EXPORT_SYMBOL(fw_send_request);
 struct fw_phy_packet {
 	struct fw_packet packet;
 	struct completion done;
+	struct kref kref;
 };
 
-static void
-transmit_phy_packet_callback(struct fw_packet *packet,
-			     struct fw_card *card, int status)
+static void phy_packet_release(struct kref *kref)
+{
+	struct fw_phy_packet *p =
+			container_of(kref, struct fw_phy_packet, kref);
+	kfree(p);
+}
+
+static void transmit_phy_packet_callback(struct fw_packet *packet,
+					 struct fw_card *card, int status)
 {
 	struct fw_phy_packet *p =
 			container_of(packet, struct fw_phy_packet, packet);
 
 	complete(&p->done);
+	kref_put(&p->kref, phy_packet_release);
 }
 
 void fw_send_phy_config(struct fw_card *card,
 			int node_id, int generation, int gap_count)
 {
-	struct fw_phy_packet p;
+	struct fw_phy_packet *p;
+	long timeout = DIV_ROUND_UP(HZ, 10);
 	u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
 		   PHY_CONFIG_ROOT_ID(node_id) |
 		   PHY_CONFIG_GAP_COUNT(gap_count);
 
-	p.packet.header[0] = data;
-	p.packet.header[1] = ~data;
-	p.packet.header_length = 8;
-	p.packet.payload_length = 0;
-	p.packet.speed = SCODE_100;
-	p.packet.generation = generation;
-	p.packet.callback = transmit_phy_packet_callback;
-	init_completion(&p.done);
-
-	card->driver->send_request(card, &p.packet);
-	wait_for_completion(&p.done);
+	p = kmalloc(sizeof(*p), GFP_KERNEL);
+	if (p == NULL)
+		return;
+
+	p->packet.header[0] = data;
+	p->packet.header[1] = ~data;
+	p->packet.header_length = 8;
+	p->packet.payload_length = 0;
+	p->packet.speed = SCODE_100;
+	p->packet.generation = generation;
+	p->packet.callback = transmit_phy_packet_callback;
+	init_completion(&p->done);
+	kref_set(&p->kref, 2);
+
+	card->driver->send_request(card, &p->packet);
+	timeout = wait_for_completion_timeout(&p->done, timeout);
+	kref_put(&p->kref, phy_packet_release);
+
+	/* will leak p if the callback is never executed */
+	WARN_ON(timeout == 0);
 }
 
 void fw_flush_transactions(struct fw_card *card)
@@ -572,7 +591,8 @@ allocate_request(struct fw_packet *p)
 		break;
 
 	default:
-		BUG();
+		fw_error("ERROR - corrupt request received - %08x %08x %08x\n",
+			 p->header[0], p->header[1], p->header[2]);
 		return NULL;
 	}
 
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
index 545663ef820..95f45f9b8e5 100644
--- a/drivers/ieee1394/Kconfig
+++ b/drivers/ieee1394/Kconfig
@@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support"
 source "drivers/firewire/Kconfig"
 
 config IEEE1394
-	tristate "IEEE 1394 (FireWire) support"
+	tristate "Stable FireWire stack"
 	depends on PCI || BROKEN
 	help
 	  IEEE 1394 describes a high performance serial bus, which is also
@@ -19,30 +19,45 @@ config IEEE1394
 	  To compile this driver as a module, say M here: the
 	  module will be called ieee1394.
 
-comment "Subsystem Options"
-	depends on IEEE1394
-
-config IEEE1394_VERBOSEDEBUG
-	bool "Excessive debugging output"
-	depends on IEEE1394
+config IEEE1394_OHCI1394
+	tristate "OHCI-1394 controllers"
+	depends on PCI && IEEE1394
 	help
-	  If you say Y here, you will get very verbose debugging logs from
-	  the subsystem which includes a dump of the header of every sent
-	  and received packet.  This can amount to a high amount of data
-	  collected in a very short time which is usually also saved to
-	  disk by the system logging daemons.
+	  Enable this driver if you have an IEEE 1394 controller based on the
+	  OHCI-1394 specification. The current driver is only tested with OHCI
+	  chipsets made by Texas Instruments and NEC. Most third-party vendors
+	  use one of these chipsets.  It should work with any OHCI-1394
+	  compliant card, however.
 
-	  Say Y if you really want or need the debugging output, everyone
-	  else says N.
+	  To compile this driver as a module, say M here: the
+	  module will be called ohci1394.
 
-comment "Controllers"
-	depends on IEEE1394
+	  NOTE:
 
-comment "Texas Instruments PCILynx requires I2C"
+	  You should only build either ohci1394 or the new firewire-ohci driver,
+	  but not both.  If you nevertheless want to install both, you should
+	  configure them only as modules and blacklist the driver(s) which you
+	  don't want to have auto-loaded.  Add either
+
+	      blacklist firewire-ohci
+	  or
+	      blacklist ohci1394
+	      blacklist video1394
+	      blacklist dv1394
+
+	  to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+	  depending on your distribution.  The latter two modules should be
+	  blacklisted together with ohci1394 because they depend on ohci1394.
+
+	  If you have an old modprobe which doesn't implement the blacklist
+	  directive, use "install modulename /bin/true" for the modules to be
+	  blacklisted.
+
+comment "PCILynx controller requires I2C"
 	depends on IEEE1394 && I2C=n
 
 config IEEE1394_PCILYNX
-	tristate "Texas Instruments PCILynx support"
+	tristate "PCILynx controller"
 	depends on PCI && IEEE1394 && I2C
 	select I2C_ALGOBIT
 	help
@@ -57,35 +72,11 @@ config IEEE1394_PCILYNX
 	  PowerMacs G3 B&W contain the PCILynx controller.  Therefore
 	  almost everybody can say N here.
 
-config IEEE1394_OHCI1394
-	tristate "OHCI-1394 support"
-	depends on PCI && IEEE1394
-	help
-	  Enable this driver if you have an IEEE 1394 controller based on the
-	  OHCI-1394 specification. The current driver is only tested with OHCI
-	  chipsets made by Texas Instruments and NEC. Most third-party vendors
-	  use one of these chipsets.  It should work with any OHCI-1394
-	  compliant card, however.
-
-	  To compile this driver as a module, say M here: the
-	  module will be called ohci1394.
-
-comment "Protocols"
-	depends on IEEE1394
-
-config IEEE1394_VIDEO1394
-	tristate "OHCI-1394 Video support"
-	depends on IEEE1394 && IEEE1394_OHCI1394
-	help
-	  This option enables video device usage for OHCI-1394 cards.  Enable
-	  this option only if you have an IEEE 1394 video device connected to
-	  an OHCI-1394 card.
-
 comment "SBP-2 support (for storage devices) requires SCSI"
 	depends on IEEE1394 && SCSI=n
 
 config IEEE1394_SBP2
-	tristate "SBP-2 support (Harddisks etc.)"
+	tristate "Storage devices (SBP-2 protocol)"
 	depends on IEEE1394 && SCSI
 	help
 	  This option enables you to use SBP-2 devices connected to an IEEE
@@ -127,24 +118,47 @@ config IEEE1394_ETH1394
 
 	  The module is called eth1394 although it does not emulate Ethernet.
 
+config IEEE1394_RAWIO
+	tristate "raw1394 userspace interface"
+	depends on IEEE1394
+	help
+	  This option adds support for the raw1394 device file which enables
+	  direct communication of user programs with IEEE 1394 devices
+	  (isochronous and asynchronous).  Almost all application programs
+	  which access FireWire require this option.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called raw1394.
+
+config IEEE1394_VIDEO1394
+	tristate "video1394 userspace interface"
+	depends on IEEE1394 && IEEE1394_OHCI1394
+	help
+	  This option adds support for the video1394 device files which enable
+	  isochronous communication of user programs with IEEE 1394 devices,
+	  especially video capture or export.  This interface is used by all
+	  libdc1394 based programs and by several other programs, in addition to
+	  the raw1394 interface.  It is generally not required for DV capture.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called video1394.
+
 config IEEE1394_DV1394
-	tristate "OHCI-DV I/O support (deprecated)"
+	tristate "dv1394 userspace interface (deprecated)"
 	depends on IEEE1394 && IEEE1394_OHCI1394
 	help
 	  The dv1394 driver is unsupported and may be removed from Linux in a
 	  future release.  Its functionality is now provided by raw1394 together
 	  with libraries such as libiec61883.
 
-config IEEE1394_RAWIO
-	tristate "Raw IEEE1394 I/O support"
+config IEEE1394_VERBOSEDEBUG
+	bool "Excessive debugging output"
 	depends on IEEE1394
 	help
-	  This option adds support for the raw1394 device file which enables
-	  direct communication of user programs with the IEEE 1394 bus and thus
-	  with the attached peripherals.  Almost all application programs which
-	  access FireWire require this option.
+	  If you say Y here, you will get very verbose debugging logs from the
+	  ieee1394 drivers, including sent and received packet headers.  This
+	  will quickly result in large amounts of data sent to the system log.
 
-	  To compile this driver as a module, say M here: the module will be
-	  called raw1394.
+	  Say Y if you really need the debugging output.  Everyone else says N.
 
 endmenu