Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (48 commits)
  net: Fix wrong interpretation of some copy_to_user() results.
  xfrm: alg_key_len & alg_icv_len should be unsigned
  [netdrvr] tehuti: move ioctl perm check closer to function start
  ipv6: Fix typo in net/ipv6/Kconfig
  via-velocity: fix vlan receipt
  tg3: sparse cleanup
  forcedeth: realtek phy crossover detection
  ibm_newemac: Increase MDIO timeouts
  gianfar: Fix skb allocation strategy
  netxen: reduce stack usage of netxen_nic_flash_print
  smc911x: test after postfix decrement fails in smc911x_{reset,drop_pkt}
  net drivers: fix platform driver hotplug/coldplug
  forcedeth: new backoff implementation
  ehea: make things static
  phylib: Add support for board-level PHY fixups
  [netdrvr] atlx: code movement: move atl1 parameter parsing
  atlx: remove flash vendor parameter
  korina: misc cleanup
  korina: fix misplaced return statement
  WAN: Fix confusing insmod error code for C101 too.
  ...

67 files changed, 1673 insertions, 729 deletions

diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt
index 0bc95eab151..8df6a7b0e66 100644
--- a/Documentation/networking/phy.txt
+++ b/Documentation/networking/phy.txt
@@ -1,7 +1,7 @@
 
 -------
 PHY Abstraction Layer
-(Updated 2006-11-30)
+(Updated 2008-04-08)
 
 Purpose
 
@@ -291,3 +291,39 @@ Writing a PHY driver
  Feel free to look at the Marvell, Cicada, and Davicom drivers in
  drivers/net/phy/ for examples (the lxt and qsemi drivers have
  not been tested as of this writing)
+
+Board Fixups
+
+ Sometimes the specific interaction between the platform and the PHY requires
+ special handling.  For instance, to change where the PHY's clock input is,
+ or to add a delay to account for latency issues in the data path.  In order
+ to support such contingencies, the PHY Layer allows platform code to register
+ fixups to be run when the PHY is brought up (or subsequently reset).
+
+ When the PHY Layer brings up a PHY it checks to see if there are any fixups
+ registered for it, matching based on UID (contained in the PHY device's phy_id
+ field) and the bus identifier (contained in phydev->dev.bus_id).  Both must
+ match, however two constants, PHY_ANY_ID and PHY_ANY_UID, are provided as
+ wildcards for the bus ID and UID, respectively.
+
+ When a match is found, the PHY layer will invoke the run function associated
+ with the fixup.  This function is passed a pointer to the phy_device of
+ interest.  It should therefore only operate on that PHY.
+
+ The platform code can either register the fixup using phy_register_fixup():
+
+	int phy_register_fixup(const char *phy_id,
+		u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *));
+
+ Or using one of the two stubs, phy_register_fixup_for_uid() and
+ phy_register_fixup_for_id():
+
+ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *));
+ int phy_register_fixup_for_id(const char *phy_id,
+		int (*run)(struct phy_device *));
+
+ The stubs set one of the two matching criteria, and set the other one to
+ match anything.
+
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 978e20a1791..1e39e78f177 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -1248,3 +1248,4 @@ module_exit(at91ether_exit)
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
 MODULE_AUTHOR("Andrew Victor");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 91a6590d107..ecd8fc6146e 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -897,6 +897,7 @@ static struct platform_driver ep93xx_eth_driver = {
 	.remove		= ep93xx_eth_remove,
 	.driver		= {
 		.name	= "ep93xx-eth",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -914,3 +915,4 @@ static void __exit ep93xx_eth_cleanup_module(void)
 module_init(ep93xx_eth_init_module);
 module_exit(ep93xx_eth_cleanup_module);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-eth");
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 5586fc62468..0afe522b8f7 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -91,6 +91,144 @@
 #include "atlx.c"
 
 /*
+ * This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define ATL1_MAX_NIC 4
+
+#define OPTION_UNSET    -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
+
+/*
+ * Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 100 (200us)
+ */
+static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
+static int num_int_mod_timer;
+module_param_array_named(int_mod_timer, int_mod_timer, int,
+	&num_int_mod_timer, 0);
+MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
+
+#define DEFAULT_INT_MOD_CNT	100	/* 200us */
+#define MAX_INT_MOD_CNT		65000
+#define MIN_INT_MOD_CNT		50
+
+struct atl1_option {
+	enum { enable_option, range_option, list_option } type;
+	char *name;
+	char *err;
+	int def;
+	union {
+		struct {	/* range_option info */
+			int min;
+			int max;
+		} r;
+		struct {	/* list_option info */
+			int nr;
+			struct atl1_opt_list {
+				int i;
+				char *str;
+			} *p;
+		} l;
+	} arg;
+};
+
+static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
+	struct pci_dev *pdev)
+{
+	if (*value == OPTION_UNSET) {
+		*value = opt->def;
+		return 0;
+	}
+
+	switch (opt->type) {
+	case enable_option:
+		switch (*value) {
+		case OPTION_ENABLED:
+			dev_info(&pdev->dev, "%s enabled\n", opt->name);
+			return 0;
+		case OPTION_DISABLED:
+			dev_info(&pdev->dev, "%s disabled\n", opt->name);
+			return 0;
+		}
+		break;
+	case range_option:
+		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+			dev_info(&pdev->dev, "%s set to %i\n", opt->name,
+				*value);
+			return 0;
+		}
+		break;
+	case list_option:{
+			int i;
+			struct atl1_opt_list *ent;
+
+			for (i = 0; i < opt->arg.l.nr; i++) {
+				ent = &opt->arg.l.p[i];
+				if (*value == ent->i) {
+					if (ent->str[0] != '\0')
+						dev_info(&pdev->dev, "%s\n",
+							ent->str);
+					return 0;
+				}
+			}
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
+		opt->name, *value, opt->err);
+	*value = opt->def;
+	return -1;
+}
+
+/*
+ * atl1_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input.  If an invalid value is given, or if no user specified
+ * value exists, a default value is used.  The final value is stored
+ * in a variable in the adapter structure.
+ */
+void __devinit atl1_check_options(struct atl1_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int bd = adapter->bd_number;
+	if (bd >= ATL1_MAX_NIC) {
+		dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
+		dev_notice(&pdev->dev, "using defaults for all values\n");
+	}
+	{			/* Interrupt Moderate Timer */
+		struct atl1_option opt = {
+			.type = range_option,
+			.name = "Interrupt Moderator Timer",
+			.err = "using default of "
+				__MODULE_STRING(DEFAULT_INT_MOD_CNT),
+			.def = DEFAULT_INT_MOD_CNT,
+			.arg = {.r = {.min = MIN_INT_MOD_CNT,
+					.max = MAX_INT_MOD_CNT} }
+		};
+		int val;
+		if (num_int_mod_timer > bd) {
+			val = int_mod_timer[bd];
+			atl1_validate_option(&val, &opt, pdev);
+			adapter->imt = (u16) val;
+		} else
+			adapter->imt = (u16) (opt.def);
+	}
+}
+
+/*
  * atl1_pci_tbl - PCI Device ID Table
  */
 static const struct pci_device_id atl1_pci_tbl[] = {
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
index 4186326d1b9..f06b854e250 100644
--- a/drivers/net/atlx/atlx.c
+++ b/drivers/net/atlx/atlx.c
@@ -253,181 +253,4 @@ static void atlx_restore_vlan(struct atlx_adapter *adapter)
 	atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp);
 }
 
-/*
- * This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-#define ATL1_MAX_NIC 4
-
-#define OPTION_UNSET    -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED  1
-
-#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
-
-/*
- * Interrupt Moderate Timer in units of 2 us
- *
- * Valid Range: 10-65535
- *
- * Default Value: 100 (200us)
- */
-static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_int_mod_timer;
-module_param_array_named(int_mod_timer, int_mod_timer, int,
-	&num_int_mod_timer, 0);
-MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
-
-/*
- * flash_vendor
- *
- * Valid Range: 0-2
- *
- * 0 - Atmel
- * 1 - SST
- * 2 - ST
- *
- * Default Value: 0
- */
-static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
-static int num_flash_vendor;
-module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
-MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
-
-#define DEFAULT_INT_MOD_CNT	100	/* 200us */
-#define MAX_INT_MOD_CNT		65000
-#define MIN_INT_MOD_CNT		50
-
-#define FLASH_VENDOR_DEFAULT	0
-#define FLASH_VENDOR_MIN	0
-#define FLASH_VENDOR_MAX	2
-
-struct atl1_option {
-	enum { enable_option, range_option, list_option } type;
-	char *name;
-	char *err;
-	int def;
-	union {
-		struct {	/* range_option info */
-			int min;
-			int max;
-		} r;
-		struct {	/* list_option info */
-			int nr;
-			struct atl1_opt_list {
-				int i;
-				char *str;
-			} *p;
-		} l;
-	} arg;
-};
-
-static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
-	struct pci_dev *pdev)
-{
-	if (*value == OPTION_UNSET) {
-		*value = opt->def;
-		return 0;
-	}
-
-	switch (opt->type) {
-	case enable_option:
-		switch (*value) {
-		case OPTION_ENABLED:
-			dev_info(&pdev->dev, "%s enabled\n", opt->name);
-			return 0;
-		case OPTION_DISABLED:
-			dev_info(&pdev->dev, "%s disabled\n", opt->name);
-			return 0;
-		}
-		break;
-	case range_option:
-		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
-			dev_info(&pdev->dev, "%s set to %i\n", opt->name,
-				*value);
-			return 0;
-		}
-		break;
-	case list_option:{
-			int i;
-			struct atl1_opt_list *ent;
-
-			for (i = 0; i < opt->arg.l.nr; i++) {
-				ent = &opt->arg.l.p[i];
-				if (*value == ent->i) {
-					if (ent->str[0] != '\0')
-						dev_info(&pdev->dev, "%s\n",
-							ent->str);
-					return 0;
-				}
-			}
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
-		opt->name, *value, opt->err);
-	*value = opt->def;
-	return -1;
-}
-
-/*
- * atl1_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input.  If an invalid value is given, or if no user specified
- * value exists, a default value is used.  The final value is stored
- * in a variable in the adapter structure.
- */
-void __devinit atl1_check_options(struct atl1_adapter *adapter)
-{
-	struct pci_dev *pdev = adapter->pdev;
-	int bd = adapter->bd_number;
-	if (bd >= ATL1_MAX_NIC) {
-		dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
-		dev_notice(&pdev->dev, "using defaults for all values\n");
-	}
-	{			/* Interrupt Moderate Timer */
-		struct atl1_option opt = {
-			.type = range_option,
-			.name = "Interrupt Moderator Timer",
-			.err = "using default of "
-				__MODULE_STRING(DEFAULT_INT_MOD_CNT),
-			.def = DEFAULT_INT_MOD_CNT,
-			.arg = {.r = {.min = MIN_INT_MOD_CNT,
-					.max = MAX_INT_MOD_CNT} }
-		};
-		int val;
-		if (num_int_mod_timer > bd) {
-			val = int_mod_timer[bd];
-			atl1_validate_option(&val, &opt, pdev);
-			adapter->imt = (u16) val;
-		} else
-			adapter->imt = (u16) (opt.def);
-	}
-
-	{			/* Flash Vendor */
-		struct atl1_option opt = {
-			.type = range_option,
-			.name = "SPI Flash Vendor",
-			.err = "using default of "
-				__MODULE_STRING(FLASH_VENDOR_DEFAULT),
-			.def = DEFAULT_INT_MOD_CNT,
-			.arg = {.r = {.min = FLASH_VENDOR_MIN,
-					.max = FLASH_VENDOR_MAX} }
-		};
-		int val;
-		if (num_flash_vendor > bd) {
-			val = flash_vendor[bd];
-			atl1_validate_option(&val, &opt, pdev);
-			adapter->hw.flash_vendor = (u8) val;
-		} else
-			adapter->hw.flash_vendor = (u8) (opt.def);
-	}
-}
-
 #endif /* ATLX_C */
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 194949afacd..0b4adf4a0f7 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -1005,3 +1005,4 @@ module_exit(axdrv_exit);
 MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ax88796");
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 717dcc1aa1e..4fec8581bfd 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -47,6 +47,7 @@
 MODULE_AUTHOR(DRV_AUTHOR);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:bfin_mac");
 
 #if defined(CONFIG_BFIN_MAC_USE_L1)
 # define bfin_mac_alloc(dma_handle, size)  l1_data_sram_zalloc(size)
@@ -1089,8 +1090,9 @@ static struct platform_driver bfin_mac_driver = {
 	.resume = bfin_mac_resume,
 	.suspend = bfin_mac_suspend,
 	.driver = {
-		   .name = DRV_NAME,
-		   },
+		.name = DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
 };
 
 static int __init bfin_mac_init(void)
@@ -1106,3 +1108,4 @@ static void __exit bfin_mac_cleanup(void)
 }
 
 module_exit(bfin_mac_cleanup);
+
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 9da7ff43703..2b5740b3d18 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -42,6 +42,7 @@
 MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
 MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cpmac");
 
 static int debug_level = 8;
 static int dumb_switch;
@@ -1103,6 +1104,7 @@ static int __devexit cpmac_remove(struct platform_device *pdev)
 
 static struct platform_driver cpmac_driver = {
 	.driver.name = "cpmac",
+	.driver.owner = THIS_MODULE,
 	.probe = cpmac_probe,
 	.remove = __devexit_p(cpmac_remove),
 };
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d63cc93f055..e6fe2614ea6 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1418,3 +1418,4 @@ module_exit(dm9000_cleanup);
 MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
 MODULE_DESCRIPTION("Davicom DM9000 network driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dm9000");
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 01c88664bad..462351ca2c8 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1326,12 +1326,10 @@ struct e1000_info e1000_82571_info = {
 	.mac			= e1000_82571,
 	.flags			= FLAG_HAS_HW_VLAN_FILTER
 				  | FLAG_HAS_JUMBO_FRAMES
-				  | FLAG_HAS_STATS_PTC_PRC
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
 				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
-				  | FLAG_HAS_STATS_ICR_ICT
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_RESET_OVERWRITES_LAA /* errata */
 				  | FLAG_TARC_SPEED_MODE_BIT /* errata */
@@ -1347,12 +1345,10 @@ struct e1000_info e1000_82572_info = {
 	.mac			= e1000_82572,
 	.flags			= FLAG_HAS_HW_VLAN_FILTER
 				  | FLAG_HAS_JUMBO_FRAMES
-				  | FLAG_HAS_STATS_PTC_PRC
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
 				  | FLAG_RX_CSUM_ENABLED
 				  | FLAG_HAS_CTRLEXT_ON_LOAD
-				  | FLAG_HAS_STATS_ICR_ICT
 				  | FLAG_TARC_SPEED_MODE_BIT, /* errata */
 	.pba			= 38,
 	.get_variants		= e1000_get_variants_82571,
@@ -1365,11 +1361,9 @@ struct e1000_info e1000_82573_info = {
 	.mac			= e1000_82573,
 	.flags			= FLAG_HAS_HW_VLAN_FILTER
 				  | FLAG_HAS_JUMBO_FRAMES
-				  | FLAG_HAS_STATS_PTC_PRC
 				  | FLAG_HAS_WOL
 				  | FLAG_APME_IN_CTRL3
 				  | FLAG_RX_CSUM_ENABLED
-				  | FLAG_HAS_STATS_ICR_ICT
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_ERT
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 572cfd44397..2a53875cddb 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -184,6 +184,7 @@
 #define E1000_SWFW_EEP_SM   0x1
 #define E1000_SWFW_PHY0_SM  0x2
 #define E1000_SWFW_PHY1_SM  0x4
+#define E1000_SWFW_CSR_SM   0x8
 
 /* Device Control */
 #define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
@@ -527,8 +528,10 @@
 #define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
 #define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
 #define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
 #define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
 
 /* NVM Control */
 #define E1000_EECD_SK        0x00000001 /* NVM Clock */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 5a89dff5226..38bfd0d261f 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -64,11 +64,14 @@ struct e1000_info;
 /* Tx/Rx descriptor defines */
 #define E1000_DEFAULT_TXD		256