Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

52 files changed, 1673 insertions, 539 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 09e031c5588..ad522e3d3d8 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,35 @@ be removed from this file.
 
 ---------------------------
 
+What:	PRISM54
+When:	2.6.34
+
+Why:	prism54 FullMAC PCI / Cardbus devices used to be supported only by the
+	prism54 wireless driver. After Intersil stopped selling these
+	devices in preference for the newer more flexible SoftMAC devices
+	a SoftMAC device driver was required and prism54 did not support
+	them. The p54pci driver now exists and has been present in the kernel for
+	a while. This driver supports both SoftMAC devices and FullMAC devices.
+	The main difference between these devices was the amount of memory which
+	could be used for the firmware. The SoftMAC devices support a smaller
+	amount of memory. Because of this the SoftMAC firmware fits into FullMAC
+	devices's memory. p54pci supports not only PCI / Cardbus but also USB
+	and SPI. Since p54pci supports all devices prism54 supports
+	you will have a conflict. I'm not quite sure how distributions are
+	handling this conflict right now. prism54 was kept around due to
+	claims users may experience issues when using the SoftMAC driver.
+	Time has passed users have not reported issues. If you use prism54
+	and for whatever reason you cannot use p54pci please let us know!
+	E-mail us at: linux-wireless@vger.kernel.org
+
+	For more information see the p54 wiki page:
+
+	http://wireless.kernel.org/en/users/Drivers/p54
+
+Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
+
+---------------------------
+
 What:	IRQF_SAMPLE_RANDOM
 Check:	IRQF_SAMPLE_RANDOM
 When:	July 2009
diff --git a/MAINTAINERS b/MAINTAINERS
index 0ab47e7fc2e..6e2e12fd9ef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -876,6 +876,7 @@ M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
 M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
@@ -887,6 +888,7 @@ M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
 M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 951735c9ec0..0189dcd36f3 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -1303,10 +1303,13 @@ static void b44_chip_reset(struct b44 *bp, int reset_kind)
 		     & MDIO_CTRL_MAXF_MASK)));
 		break;
 	case SSB_BUSTYPE_PCI:
-	case SSB_BUSTYPE_PCMCIA:
 		bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
 		     (0x0d & MDIO_CTRL_MAXF_MASK)));
 		break;
+	case SSB_BUSTYPE_PCMCIA:
+	case SSB_BUSTYPE_SDIO:
+		WARN_ON(1); /* A device with this bus does not exist. */
+		break;
 	}
 
 	br32(bp, B44_MDIO_CTRL);
@@ -1764,10 +1767,13 @@ static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *inf
 	case SSB_BUSTYPE_PCI:
 		strlcpy(info->bus_info, pci_name(bus->host_pci), sizeof(info->bus_info));
 		break;
-	case SSB_BUSTYPE_PCMCIA:
 	case SSB_BUSTYPE_SSB:
 		strlcpy(info->bus_info, "SSB", sizeof(info->bus_info));
 		break;
+	case SSB_BUSTYPE_PCMCIA:
+	case SSB_BUSTYPE_SDIO:
+		WARN_ON(1); /* A device with this bus does not exist. */
+		break;
 	}
 }
 
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index a8871a84d87..ad89d23968d 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -275,51 +275,26 @@ config PCMCIA_WL3501
 	 micro support for ethtool.
 
 config PRISM54
-	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' 
+	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
 	depends on PCI && EXPERIMENTAL && WLAN_80211
 	select WIRELESS_EXT
 	select FW_LOADER
 	---help---
-	  Enable PCI and Cardbus support for the following chipset based cards:
-
-	  ISL3880 - Prism GT            802.11 b/g
-	  ISL3877 - Prism Indigo        802.11 a
-	  ISL3890 - Prism Duette        802.11 a/b/g
-	  
-	  For a complete list of supported cards visit <http://prism54.org>.
-	  Here is the latest confirmed list of supported cards:
-
-	  3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
-	  Allnet ALL0271 PCI Card
-	  Compex WL54G Cardbus Card
-	  Corega CG-WLCB54GT Cardbus Card
-	  D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
-	  I-O Data WN-G54/CB Cardbus Card
-	  Kobishi XG-300 aka Z-Com Cardbus Card
-	  Netgear WG511 Cardbus Card
-	  Ovislink WL-5400PCI PCI Card
-	  Peabird WLG-PCI PCI Card
-	  Sitecom WL-100i Cardbus Card
-	  Sitecom WL-110i PCI Card
-	  SMC2802W -    EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
-	  SMC2835W -    EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
-	  SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
-	  Z-Com XG-900 PCI Card
-	  Zyxel G-100 Cardbus Card
-
-	  If you enable this you will need a firmware file as well.
-	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
-	  You can get this non-GPL'd firmware file from the Prism54 project page:
-	  <http://prism54.org>
-	  You will also need the /etc/hotplug/firmware.agent script from
-	  a current hotplug package.
-
-	  Note: You need a motherboard with DMA support to use any of these cards 
-	  
-	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-	  The module will be called prism54.
+	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
+	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
+	  p54pci supports FullMAC PCI/Cardbus devices as well. For details on
+	  the scheduled removal of this driver on the kernel see the feature
+	  removal schedule:
+
+	  Documentation/feature-removal-schedule.txt
+
+	  For more information refer to the p54 wiki:
+
+	  http://wireless.kernel.org/en/users/Drivers/p54
+
+	  Note: You need a motherboard with DMA support to use any of these cards
+
+	  When built as module you get the module prism54
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index df86f70cd81..b3e5cf3735b 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -396,6 +396,136 @@ static struct ar9170_phy_init ar5416_phy_init[] = {
 	{ 0x1c9384, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, }
 };
 
+/*
+ * look up a certain register in ar5416_phy_init[] and return the init. value
+ * for the band and bandwidth given. Return 0 if register address not found.
+ */
+static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz)
+{
+	unsigned int i;
+	for (i = 0; i < ARRAY_SIZE(ar5416_phy_init); i++) {
+		if (ar5416_phy_init[i].reg != reg)
+			continue;
+
+		if (is_2ghz) {
+			if (is_40mhz)
+				return ar5416_phy_init[i]._2ghz_40;
+			else
+				return ar5416_phy_init[i]._2ghz_20;
+		} else {
+			if (is_40mhz)
+				return ar5416_phy_init[i]._5ghz_40;
+			else
+				return ar5416_phy_init[i]._5ghz_20;
+		}
+	}
+	return 0;
+}
+
+/*
+ * initialize some phy regs from eeprom values in modal_header[]
+ * acc. to band and bandwith
+ */
+static int ar9170_init_phy_from_eeprom(struct ar9170 *ar,
+				bool is_2ghz, bool is_40mhz)
+{
+	static const u8 xpd2pd[16] = {
+		0x2, 0x2, 0x2, 0x1, 0x2, 0x2, 0x6, 0x2,
+		0x2, 0x3, 0x7, 0x2, 0xB, 0x2, 0x2, 0x2
+	};
+	u32 defval, newval;
+	/* pointer to the modal_header acc. to band */
+	struct ar9170_eeprom_modal *m = &ar->eeprom.modal_header[is_2ghz];
+
+	ar9170_regwrite_begin(ar);
+
+	/* ant common control (index 0) */
+	newval = le32_to_cpu(m->antCtrlCommon);
+	ar9170_regwrite(0x1c5964, newval);
+
+	/* ant control chain 0 (index 1) */
+	newval = le32_to_cpu(m->antCtrlChain[0]);
+	ar9170_regwrite(0x1c5960, newval);
+
+	/* ant control chain 2 (index 2) */
+	newval = le32_to_cpu(m->antCtrlChain[1]);
+	ar9170_regwrite(0x1c7960, newval);
+
+	/* SwSettle (index 3) */
+	if (!is_40mhz) {
+		defval = ar9170_get_default_phy_reg_val(0x1c5844,
+							is_2ghz, is_40mhz);
+		newval = (defval & ~0x3f80) |
+			((m->switchSettling & 0x7f) << 7);
+		ar9170_regwrite(0x1c5844, newval);
+	}
+
+	/* adcDesired, pdaDesired (index 4) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5850, is_2ghz, is_40mhz);
+	newval = (defval & ~0xffff) | ((u8)m->pgaDesiredSize << 8) |
+		((u8)m->adcDesiredSize);
+	ar9170_regwrite(0x1c5850, newval);
+
+	/* TxEndToXpaOff, TxFrameToXpaOn (index 5) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5834, is_2ghz, is_40mhz);
+	newval = (m->txEndToXpaOff << 24) | (m->txEndToXpaOff << 16) |
+		(m->txFrameToXpaOn << 8) | m->txFrameToXpaOn;
+	ar9170_regwrite(0x1c5834, newval);
+
+	/* TxEndToRxOn (index 6) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5828, is_2ghz, is_40mhz);
+	newval = (defval & ~0xff0000) | (m->txEndToRxOn << 16);
+	ar9170_regwrite(0x1c5828, newval);
+
+	/* thresh62 (index 7) */
+	defval = ar9170_get_default_phy_reg_val(0x1c8864, is_2ghz, is_40mhz);
+	newval = (defval & ~0x7f000) | (m->thresh62 << 12);
+	ar9170_regwrite(0x1c8864, newval);
+
+	/* tx/rx attenuation chain 0 (index 8) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5848, is_2ghz, is_40mhz);
+	newval = (defval & ~0x3f000) | ((m->txRxAttenCh[0] & 0x3f) << 12);
+	ar9170_regwrite(0x1c5848, newval);
+
+	/* tx/rx attenuation chain 2 (index 9) */
+	defval = ar9170_get_default_phy_reg_val(0x1c7848, is_2ghz, is_40mhz);
+	newval = (defval & ~0x3f000) | ((m->txRxAttenCh[1] & 0x3f) << 12);
+	ar9170_regwrite(0x1c7848, newval);
+
+	/* tx/rx margin chain 0 (index 10) */
+	defval = ar9170_get_default_phy_reg_val(0x1c620c, is_2ghz, is_40mhz);
+	newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[0] & 0x3f) << 18);
+	/* bsw margin chain 0 for 5GHz only */
+	if (!is_2ghz)
+		newval = (newval & ~0x3c00) | ((m->bswMargin[0] & 0xf) << 10);
+	ar9170_regwrite(0x1c620c, newval);
+
+	/* tx/rx margin chain 2 (index 11) */
+	defval = ar9170_get_default_phy_reg_val(0x1c820c, is_2ghz, is_40mhz);
+	newval = (defval & ~0xfc0000) | ((m->rxTxMarginCh[1] & 0x3f) << 18);
+	ar9170_regwrite(0x1c820c, newval);
+
+	/* iqCall, iqCallq chain 0 (index 12) */
+	defval = ar9170_get_default_phy_reg_val(0x1c5920, is_2ghz, is_40mhz);
+	newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[0] & 0x3f) << 5) |
+		((u8)m->iqCalQCh[0] & 0x1f);
+	ar9170_regwrite(0x1c5920, newval);
+
+	/* iqCall, iqCallq chain 2 (index 13) */
+	defval = ar9170_get_default_phy_reg_val(0x1c7920, is_2ghz, is_40mhz);
+	newval = (defval & ~0x7ff) | (((u8)m->iqCalICh[1] & 0x3f) << 5) |
+		((u8)m->iqCalQCh[1] & 0x1f);
+	ar9170_regwrite(0x1c7920, newval);
+
+	/* xpd gain mask (index 14) */
+	defval = ar9170_get_default_phy_reg_val(0x1c6258, is_2ghz, is_40mhz);
+	newval = (defval & ~0xf0000) | (xpd2pd[m->xpdGain & 0xf] << 16);
+	ar9170_regwrite(0x1c6258, newval);
+	ar9170_regwrite_finish();
+
+	return ar9170_regwrite_result();
+}
+
 int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
 {
 	int i, err;
@@ -426,7 +556,9 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
 	if (err)
 		return err;
 
-	/* XXX: use EEPROM data here! */
+	err = ar9170_init_phy_from_eeprom(ar, is_2ghz, is_40mhz);
+	if (err)
+		return err;
 
 	err = ar9170_init_power_cal(ar);
 	if (err)
@@ -987,6 +1119,282 @@ static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2)
 #undef SHIFT
 }
 
+static u8 ar9170_interpolate_val(u8 x, u8 *x_array, u8 *y_array)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (x <= x_array[i + 1])
+			break;
+
+	return ar9170_interpolate_u8(x,
+				     x_array[i],
+				     y_array[i],
+				     x_array[i + 1],
+				     y_array[i + 1]);
+}
+
+static int ar9170_set_freq_cal_data(struct ar9170 *ar,
+				    struct ieee80211_channel *channel)
+{
+	u8 *cal_freq_pier;
+	u8 vpds[2][AR5416_PD_GAIN_ICEPTS];
+	u8 pwrs[2][AR5416_PD_GAIN_ICEPTS];
+	int chain, idx, i;
+	u8 f;
+
+	switch (channel->band) {
+	case IEEE80211_BAND_2GHZ:
+		f = channel->center_freq - 2300;
+		cal_freq_pier = ar->eeprom.cal_freq_pier_2G;
+		i = AR5416_NUM_2G_CAL_PIERS - 1;
+		break;
+
+	case IEEE80211_BAND_5GHZ:
+		f = (channel->center_freq - 4800) / 5;
+		cal_freq_pier = ar->eeprom.cal_freq_pier_5G;
+		i = AR5416_NUM_5G_CAL_PIERS - 1;
+		break;
+
+	default:
+		return -EINVAL;
+		break;
+	}
+
+	for (; i >= 0; i--) {
+		if (cal_freq_pier[i] != 0xff)
+			break;
+	}
+	if (i < 0)
+		return -EINVAL;
+
+	idx = ar9170_find_freq_idx(i, cal_freq_pier, f);
+
+	ar9170_regwrite_begin(ar);
+
+	for (chain = 0; chain < AR5416_MAX_CHAINS; chain++) {
+		for (i = 0; i < AR5416_PD_GAIN_ICEPTS; i++) {
+			struct ar9170_calibration_data_per_freq *cal_pier_data;
+			int j;
+
+			switch (channel->band) {
+			case IEEE80211_BAND_2GHZ:
+				cal_pier_data = &ar->eeprom.
+					cal_pier_data_2G[chain][idx];
+				break;
+
+			case IEEE80211_BAND_5GHZ:
+				cal_pier_data = &ar->eeprom.
+					cal_pier_data_5G[chain][idx];
+				break;
+
+			default:
+				return -EINVAL;
+			}
+
+			for (j = 0; j < 2; j++) {
+				vpds[j][i] = ar9170_interpolate_u8(f,
+					cal_freq_pier[idx],
+					cal_pier_data->vpd_pdg[j][i],
+					cal_freq_pier[idx + 1],
+					cal_pier_data[1].vpd_pdg[j][i]);
+
+				pwrs[j][i] = ar9170_interpolate_u8(f,
+					cal_freq_pier[idx],
+					cal_pier_data->pwr_pdg[j][i],
+					cal_freq_pier[idx + 1],
+					cal_pier_data[1].pwr_pdg[j][i]) / 2;
+			}
+		}
+
+		for (i = 0; i < 76; i++) {
+			u32 phy_data;
+			u8 tmp;
+
+			if (i < 25) {
+				tmp = ar9170_interpolate_val(i, &pwrs[0][0],
+							     &vpds[0][0]);
+			} else {
+				tmp = ar9170_interpolate_val(i - 12,
+							     &pwrs[1][0],
+							     &vpds[1][0]);
+			}
+
+			phy_data |= tmp << ((i & 3) << 3);
+			if ((i & 3) == 3) {
+				ar9170_regwrite(0x1c6280 + chain * 0x1000 +
+						(i & ~3), phy_data);
+				phy_data = 0;
+			}
+		}
+
+		for (i = 19; i < 32; i++)
+			ar9170_regwrite(0x1c6280 + chain * 0x1000 + (i << 2),
+					0x0);
+	}
+
+	ar9170_regwrite_finish();
+	return ar9170_regwrite_result();
+}
+
+static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
+				    struct ar9170_calctl_edges edges[],
+				    u32 freq)
+{
+/* TODO: move somewhere else */
+#define AR5416_MAX_RATE_POWER        63
+
+	int i;
+	u8 rc = AR5416_MAX_RATE_POWER;
+	u8 f;
+	if (freq < 3000)
+		f = freq - 2300;
+	else
+		f = (freq - 4800) / 5;
+
+	for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
+		if (edges[i].channel == 0xff)
+			break;
+		if (f == edges[i].channel) {
+			/* exact freq match */
+			rc = edges[i].power_flags & ~AR9170_CALCTL_EDGE_FLAGS;
+			break;
+		}
+		if (i > 0 && f < edges[i].channel) {
+			if (f > edges[i-1].channel &&
+			    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+				/* lower channel has the inband flag set */
+				rc = edges[i-1].power_flags &
+					~AR9170_CALCTL_EDGE_FLAGS;
+			}
+			break;
+		}
+	}
+
+	if (i == AR5416_NUM_BAND_EDGES) {
+		if (f > edges[i-1].channel &&
+		    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+			/* lower channel has the inband flag set */
+			rc = edges[i-1].power_flags &
+				~AR9170_CALCTL_EDGE_FLAGS;
+		}
+	}
+	return rc;
+}
+
+/* calculate the conformance test limits and apply them to ar->power*
+ * (derived from otus hal/hpmain.c, line 3706 ff.)
+ */
+static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
+{
+	u8 ctl_grp; /* CTL group */
+	u8 ctl_idx; /* CTL index */
+	int i, j;
+	struct ctl_modes {
+		u8 ctl_mode;
+		u8 max_power;
+		u8 *pwr_cal_data;
+		int pwr_cal_len;
+	} *modes;
+
+	/* order is relevant in the mode_list_*: we fall back to the
+	 * lower indices if any mode is missed in the EEPROM.
+	 */
+	struct ctl_modes mode_list_2ghz[] = {
+		{ CTL_11B, 0, ar->power_2G_cck, 4 },
+		{ CTL_11G, 0, ar->power_2G_ofdm, 4 },
+		{ CTL_2GHT20, 0, ar->power_2G_ht20, 8 },
+		{ CTL_2GHT40, 0, ar->power_2G_ht40, 8 },
+	};
+	struct ctl_modes mode_list_5ghz[] = {
+		{ CTL_11A, 0, ar->power_5G_leg, 4 },
+		{ CTL_5GHT20, 0, ar->power_5G_ht20, 8 },
+		{ CTL_5GHT40, 0, ar->power_5G_ht40, 8 },
+	};
+	int nr_modes;
+
+#define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
+
+	/* TODO: investigate the differences between OTUS'
+	 * hpreg.c::zfHpGetRegulatoryDomain() and
+	 * ath/regd.c::ath_regd_get_band_ctl() -
+	 * e.g. for FCC3_WORLD the OTUS procedure
+	 * always returns CTL_FCC, while the one in ath/ delivers
+	 * CTL_ETSI for 2GHz and CTL_FCC for 5GHz.
+	 */
+	ctl_grp = ath_regd_get_band_ctl(&ar->common.regulatory,
+					ar->hw->conf.channel->band);
+
+	/* ctl group not found - either invalid band (NO_CTL) or ww roaming */
+	if (ctl_grp == NO_CTL || ctl_grp == SD_NO_CTL)
+		ctl_grp = CTL_FCC;
+
+	if (ctl_grp != CTL_FCC)
+		/* skip CTL and heavy clip for CTL_MKK and CTL_ETSI */
+		return;
+
+	if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) {
+		modes = mode_list_2ghz;
+		nr_modes = ARRAY_SIZE(mode_list_2ghz);
+	} else {
+		modes = mode_list_5ghz;
+		nr_modes = ARRAY_SIZE(mode_list_5ghz);
+	}
+
+	for (i = 0; i < nr_modes; i++) {
+		u8 c = ctl_grp | modes[i].ctl_mode;
+		for (ctl_idx = 0; ctl_idx < AR5416_NUM_CTLS; ctl_idx++)
+			if (c == ar->eeprom.ctl_index[ctl_idx])
+				break;
+		if (ctl_idx < AR5416_NUM_CTLS) {
+			int f_off = 0;
+
+			/* adjust freq for 40MHz */
+			if (modes[i].ctl_mode == CTL_2GHT40 ||
+			    modes[i].ctl_mode == CTL_5GHT40) {
+				if (bw == AR9170_BW_40_BELOW)
+					f_off = -10;
+				else
+					f_off = 10;
+			}
+
+			modes[i].max_power =
+				ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
+							  freq+f_off);
+
+			/* TODO: check if the regulatory max. power is
+			 *  controlled by cfg80211 for DFS
+			 * (hpmain applies it to max_power itself for DFS freq)
+			 */
+
+		} else {
+			/* Workaround in otus driver, hpmain.c, line 3906:
+			 * if no data for 5GHT20 are found, take the
+			 * legacy 5G value.
+			 * We extend this here to fallback from any other *HT or
+			 * 11G, too.
+			 */
+			int k = i;
+
+			modes[i].max_power = AR5416_MAX_RATE_POWER;
+			while (k-- > 0) {
+				if (modes[k].max_power !=
+				    AR5416_MAX_RATE_POWER) {
+					modes[i].max_power = modes[k].max_power;
+					break;
+				}
+			}
+		}
+
+		/* apply max power to pwr_cal_data (ar->power_*) */
+		for (j = 0; j < modes[i].pwr_cal_len; j++) {
+			modes[i].pwr_cal_data[j] = min(modes[i].pwr_cal_data[j],
+						       modes[i].max_power);
+		}
+	}
+#undef EDGES
+}
+
 static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 {
 	struct ar9170_calibration_target_power_legacy *ctpl;
@@ -1089,6 +1497,12 @@ static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 					ctph[idx + 1].power[n]);
 	}
 
+
+	/* calc. conformance test limits and apply to ar->power*[] */
+	ar9170_calc_ctl(ar, freq, bw);
+
+	/* TODO: (heavy clip) regulatory domain power level fine-tuning. */
+
 	/* set ACK/CTS TX power */
 	ar9170_regwrite_begin(ar);
 
@@ -1207,6 +1621,10 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 	if (err)
 		return err;
 
+	err = ar9170_set_freq_cal_data(ar, channel);
+	if (err)
+		return err;
+
 	err = ar9170_set_power_cal(ar, channel->center_freq, bw);
 	if (err)
 		return err;
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 5618fc25d52..2ad7d0280f7 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -119,17 +119,15 @@ static int ath_ahb_probe(struct platform_device *pdev)
 	sc->bus_ops = &ath_ahb_bus_ops;
 	sc->irq = irq;
 
-	ret = ath_init_device(AR5416_AR9100_DEVID, sc);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
-		ret = -ENODEV;
+	ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto err_free_hw;
 	}
 
 	ret = request_irq(irq, ath_isr, IRQF_SHARED, "ath9k", sc);
 	if (ret) {
-		dev_err(&pdev->dev, "request_irq failed, err=%d\n", ret);
-		ret = -EIO;
+		dev_err(&pdev->dev, "request_irq failed\n");
 		goto err_detach;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 1c68a9da22d..1d59f10f68d 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -658,7 +658,7 @@ extern struct ieee80211_ops ath9k_ops;
 
 irqreturn_t ath_isr(int irq, void *dev);
 void ath_cleanup(struct