OMAPDSS: Add TPO TD043MTEA1 panel driver

Add TPO TD043MTEA1 panel driver which uses the new DSS device model
and DSS ops.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>

4 files changed, 670 insertions, 0 deletions

diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 917db6e7966..c66ecb23e3d 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -55,4 +55,11 @@ config DISPLAY_PANEL_SHARP_LS037V7DW01
         depends on BACKLIGHT_CLASS_DEVICE
         help
           LCD Panel used in TI's SDP3430 and EVM boards
+
+config DISPLAY_PANEL_TPO_TD043MTEA1
+        tristate "TPO TD043MTEA1 LCD Panel"
+        depends on SPI
+        help
+          LCD Panel used in OMAP3 Pandora
+
 endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index dde7b8ddda0..628ea3e7bb6 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
 obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
 obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+obj-$(CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
new file mode 100644
index 00000000000..eadc6529fa3
--- /dev/null
+++ b/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
@@ -0,0 +1,646 @@
+/*
+ * TPO TD043MTEA1 Panel driver
+ *
+ * Author: Gražvydas Ignotas <notasas@gmail.com>
+ * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+#define TPO_R02_MODE(x)		((x) & 7)
+#define TPO_R02_MODE_800x480	7
+#define TPO_R02_NCLK_RISING	BIT(3)
+#define TPO_R02_HSYNC_HIGH	BIT(4)
+#define TPO_R02_VSYNC_HIGH	BIT(5)
+
+#define TPO_R03_NSTANDBY	BIT(0)
+#define TPO_R03_EN_CP_CLK	BIT(1)
+#define TPO_R03_EN_VGL_PUMP	BIT(2)
+#define TPO_R03_EN_PWM		BIT(3)
+#define TPO_R03_DRIVING_CAP_100	BIT(4)
+#define TPO_R03_EN_PRE_CHARGE	BIT(6)
+#define TPO_R03_SOFTWARE_CTL	BIT(7)
+
+#define TPO_R04_NFLIP_H		BIT(0)
+#define TPO_R04_NFLIP_V		BIT(1)
+#define TPO_R04_CP_CLK_FREQ_1H	BIT(2)
+#define TPO_R04_VGL_FREQ_1H	BIT(4)
+
+#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
+			TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \
+			TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
+			TPO_R03_SOFTWARE_CTL)
+
+#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
+			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
+
+static const u16 tpo_td043_def_gamma[12] = {
+	105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
+};
+
+struct panel_drv_data {
+	struct omap_dss_device	dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings videomode;
+
+	int data_lines;
+
+	struct spi_device *spi;
+	struct regulator *vcc_reg;
+	int nreset_gpio;
+	u16 gamma[12];
+	u32 mode;
+	u32 hmirror:1;
+	u32 vmirror:1;
+	u32 powered_on:1;
+	u32 spi_suspended:1;
+	u32 power_on_resume:1;
+};
+
+static const struct omap_video_timings tpo_td043_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+
+	.pixel_clock	= 36000,
+
+	.hsw		= 1,
+	.hfp		= 68,
+	.hbp		= 214,
+
+	.vsw		= 1,
+	.vfp		= 39,
+	.vbp		= 34,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
+{
+	struct spi_message	m;
+	struct spi_transfer	xfer;
+	u16			w;
+	int			r;
+
+	spi_message_init(&m);
+
+	memset(&xfer, 0, sizeof(xfer));
+
+	w = ((u16)addr << 10) | (1 << 8) | data;
+	xfer.tx_buf = &w;
+	xfer.bits_per_word = 16;
+	xfer.len = 2;
+	spi_message_add_tail(&xfer, &m);
+
+	r = spi_sync(spi, &m);
+	if (r < 0)
+		dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
+	return r;
+}
+
+static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
+{
+	u8 i, val;
+
+	/* gamma bits [9:8] */
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x11, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x12, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x13, val);
+
+	/* gamma bits [7:0] */
+	for (val = i = 0; i < 12; i++)
+		tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
+}
+
+static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
+{
+	u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
+		TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
+	if (h)
+		reg4 &= ~TPO_R04_NFLIP_H;
+	if (v)
+		reg4 &= ~TPO_R04_NFLIP_V;
+
+	return tpo_td043_write(spi, 4, reg4);
+}
+
+static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+	ddata->hmirror = enable;
+	return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+			ddata->vmirror);
+}
+
+static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+	return ddata->hmirror;
+}
+
+static ssize_t tpo_td043_vmirror_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
+}
+
+static ssize_t tpo_td043_vmirror_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int val;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	val = !!val;
+
+	ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
+	if (ret < 0)
+		return ret;
+
+	ddata->vmirror = val;
+
+	return count;
+}
+
+static ssize_t tpo_td043_mode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
+}
+
+static ssize_t tpo_td043_mode_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	long val;
+	int ret;
+
+	ret = kstrtol(buf, 0, &val);
+	if (ret != 0 || val & ~7)
+		return -EINVAL;
+
+	ddata->mode = val;
+
+	val |= TPO_R02_NCLK_RISING;
+	tpo_td043_write(ddata->spi, 2, val);
+
+	return count;
+}
+
+static ssize_t tpo_td043_gamma_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	ssize_t len = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
+		ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
+				ddata->gamma[i]);
+		if (ret < 0)
+			return ret;
+		len += ret;
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t tpo_td043_gamma_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	unsigned int g[12];
+	int ret;
+	int i;
+
+	ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
+			&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
+			&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
+
+	if (ret != 12)
+		return -EINVAL;
+
+	for (i = 0; i < 12; i++)
+		ddata->gamma[i] = g[i];
+
+	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+	return count;
+}
+
+static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
+		tpo_td043_vmirror_show, tpo_td043_vmirror_store);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+		tpo_td043_mode_show, tpo_td043_mode_store);
+static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
+		tpo_td043_gamma_show, tpo_td043_gamma_store);
+
+static struct attribute *tpo_td043_attrs[] = {
+	&dev_attr_vmirror.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_gamma.attr,
+	NULL,
+};
+
+static struct attribute_group tpo_td043_attr_group = {
+	.attrs = tpo_td043_attrs,
+};
+
+static int tpo_td043_power_on(struct panel_drv_data *ddata)
+{
+	int r;
+
+	if (ddata->powered_on)
+		return 0;
+
+	r = regulator_enable(ddata->vcc_reg);
+	if (r != 0)
+		return r;
+
+	/* wait for panel to stabilize */
+	msleep(160);
+
+	if (gpio_is_valid(ddata->nreset_gpio))
+		gpio_set_value(ddata->nreset_gpio, 1);
+
+	tpo_td043_write(ddata->spi, 2,
+			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
+	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
+	tpo_td043_write(ddata->spi, 0x20, 0xf0);
+	tpo_td043_write(ddata->spi, 0x21, 0xf0);
+	tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+			ddata->vmirror);
+	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+	ddata->powered_on = 1;
+	return 0;
+}
+
+static void tpo_td043_power_off(struct panel_drv_data *ddata)
+{
+	if (!ddata->powered_on)
+		return;
+
+	tpo_td043_write(ddata->spi, 3,
+			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
+
+	if (gpio_is_valid(ddata->nreset_gpio))
+		gpio_set_value(ddata->nreset_gpio, 0);
+
+	/* wait for at least 2 vsyncs before cutting off power */
+	msleep(50);
+
+	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
+
+	regulator_disable(ddata->vcc_reg);
+
+	ddata->powered_on = 0;
+}
+
+static int tpo_td043_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int tpo_td043_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	/*
+	 * If we are resuming from system suspend, SPI clocks might not be
+	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
+	 */
+	if (!ddata->spi_suspended) {
+		r = tpo_td043_power_on(ddata);
+		if (r) {
+			in->ops.dpi->disable(in);
+			return r;
+		}
+	}
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void tpo_td043_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.dpi->disable(in);
+
+	if (!ddata->spi_suspended)
+		tpo_td043_power_off(ddata);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver tpo_td043_ops = {
+	.connect	= tpo_td043_connect,
+	.disconnect	= tpo_td043_disconnect,
+
+	.enable		= tpo_td043_enable,
+	.disable	= tpo_td043_disable,
+
+	.set_timings	= tpo_td043_set_timings,
+	.get_timings	= tpo_td043_get_timings,
+	.check_timings	= tpo_td043_check_timings,
+
+	.set_mirror	= tpo_td043_set_hmirror,
+	.get_mirror	= tpo_td043_get_hmirror,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+
+static int tpo_td043_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_tpo_td043mtea1_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	ddata->nreset_gpio = pdata->nreset_gpio;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tpo_td043_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->bits_per_word = 16;
+	spi->mode = SPI_MODE_0;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = tpo_td043_probe_pdata(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->mode = TPO_R02_MODE_800x480;
+	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
+
+	ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
+	if (IS_ERR(ddata->vcc_reg)) {
+		dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
+		r = PTR_ERR(ddata->vcc_reg);
+		goto err_regulator;
+	}
+
+	if (gpio_is_valid(ddata->nreset_gpio)) {
+		r = devm_gpio_request_one(&spi->dev,
+				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
+				"lcd reset");
+		if (r < 0) {
+			dev_err(&spi->dev, "couldn't request reset GPIO\n");
+			goto err_gpio_req;
+		}
+	}
+
+	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
+	if (r) {
+		dev_err(&spi->dev, "failed to create sysfs files\n");
+		goto err_sysfs;
+	}
+
+	ddata->videomode = tpo_td043_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &tpo_td043_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+err_sysfs:
+err_gpio_req:
+err_regulator:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int tpo_td043_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	tpo_td043_disable(dssdev);
+	tpo_td043_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tpo_td043_spi_suspend(struct device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
+
+	ddata->power_on_resume = ddata->powered_on;
+	tpo_td043_power_off(ddata);
+	ddata->spi_suspended = 1;
+
+	return 0;
+}
+
+static int tpo_td043_spi_resume(struct device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "tpo_td043_spi_resume\n");
+
+	if (ddata->power_on_resume) {
+		ret = tpo_td043_power_on(ddata);
+		if (ret)
+			return ret;
+	}
+	ddata->spi_suspended = 0;
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
+	tpo_td043_spi_suspend, tpo_td043_spi_resume);
+
+static struct spi_driver tpo_td043_spi_driver = {
+	.driver = {
+		.name	= "panel-tpo-td043mtea1",
+		.owner	= THIS_MODULE,
+		.pm	= &tpo_td043_spi_pm,
+	},
+	.probe	= tpo_td043_probe,
+	.remove	= tpo_td043_remove,
+};
+
+module_spi_driver(tpo_td043_spi_driver);
+
+MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index 5a6e1e8645d..efa1c80f724 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -322,4 +322,20 @@ struct panel_sharp_ls037v7dw01_platform_data {
 	int ud_gpio;
 };
 
+/**
+ * panel-tpo-td043mtea1 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @nreset_gpio: reset signal
+ */
+struct panel_tpo_td043mtea1_platform_data {
+	const char *name;
+	const char *source;
+
+	int data_lines;
+
+	int nreset_gpio;
+};
+
 #endif /* __OMAP_PANEL_DATA_H */