Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  GRETH: resolve SMP issues and other problems
  GRETH: handle frame error interrupts
  GRETH: avoid writing bad speed/duplex when setting transfer mode
  GRETH: fixed skb buffer memory leak on frame errors
  GRETH: GBit transmit descriptor handling optimization
  GRETH: fix opening/closing
  GRETH: added raw AMBA vendor/device number to match against.
  cassini: Fix build bustage on x86.
  e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs
  e1000e: update Copyright for 2011
  e1000: Avoid unhandled IRQ
  r8169: keep firmware in memory.
  netdev: tilepro: Use is_unicast_ether_addr helper
  etherdevice.h: Add is_unicast_ether_addr function
  ks8695net: Use default implementation of ethtool_ops::get_link
  ks8695net: Disable non-working ethtool operations
  USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable.
  vxge: Remember to release firmware after upgrading firmware
  netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr
  ipsec: update MAX_AH_AUTH_LEN to support sha512
  ...

59 files changed, 655 insertions, 576 deletions

diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 03641a08e27..8906648f962 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -268,10 +268,6 @@
 !Finclude/net/mac80211.h ieee80211_ops
 !Finclude/net/mac80211.h ieee80211_alloc_hw
 !Finclude/net/mac80211.h ieee80211_register_hw
-!Finclude/net/mac80211.h ieee80211_get_tx_led_name
-!Finclude/net/mac80211.h ieee80211_get_rx_led_name
-!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
-!Finclude/net/mac80211.h ieee80211_get_radio_led_name
 !Finclude/net/mac80211.h ieee80211_unregister_hw
 !Finclude/net/mac80211.h ieee80211_free_hw
       </chapter>
@@ -382,6 +378,23 @@
         </para>
       </partintro>
 
+      <chapter id="led-support">
+        <title>LED support</title>
+        <para>
+         Mac80211 supports various ways of blinking LEDs. Wherever possible,
+         device LEDs should be exposed as LED class devices and hooked up to
+         the appropriate trigger, which will then be triggered appropriately
+         by mac80211.
+        </para>
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_tpt_blink
+!Finclude/net/mac80211.h ieee80211_tpt_led_trigger_flags
+!Finclude/net/mac80211.h ieee80211_create_tpt_led_trigger
+      </chapter>
+
       <chapter id="hardware-crypto-offload">
         <title>Hardware crypto acceleration</title>
 !Pinclude/net/mac80211.h Hardware crypto acceleration
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 54c6d849cf2..62d6f88cbab 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -854,12 +854,12 @@ ks8695_set_msglevel(struct net_device *ndev, u32 value)
 }
 
 /**
- *	ks8695_get_settings - Get device-specific settings.
+ *	ks8695_wan_get_settings - Get device-specific settings.
  *	@ndev: The network device to read settings from
  *	@cmd: The ethtool structure to read into
  */
 static int
-ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+ks8695_wan_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
 {
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 	u32 ctrl;
@@ -870,69 +870,50 @@ ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
 			  SUPPORTED_TP | SUPPORTED_MII);
 	cmd->transceiver = XCVR_INTERNAL;
 
-	/* Port specific extras */
-	switch (ksp->dtype) {
-	case KS8695_DTYPE_HPNA:
-		cmd->phy_address = 0;
-		/* not supported for HPNA */
-		cmd->autoneg = AUTONEG_DISABLE;
+	cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
+	cmd->port = PORT_MII;
+	cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
+	cmd->phy_address = 0;
 
-		/* BUG: Erm, dtype hpna implies no phy regs */
-		/*
-		ctrl = readl(KS8695_MISC_VA + KS8695_HMC);
-		cmd->speed = (ctrl & HMC_HSS) ? SPEED_100 : SPEED_10;
-		cmd->duplex = (ctrl & HMC_HDS) ? DUPLEX_FULL : DUPLEX_HALF;
-		*/
-		return -EOPNOTSUPP;
-	case KS8695_DTYPE_WAN:
-		cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
-		cmd->port = PORT_MII;
-		cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
-		cmd->phy_address = 0;
+	ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+	if ((ctrl & WMC_WAND) == 0) {
+		/* auto-negotiation is enabled */
+		cmd->advertising |= ADVERTISED_Autoneg;
+		if (ctrl & WMC_WANA100F)
+			cmd->advertising |= ADVERTISED_100baseT_Full;
+		if (ctrl & WMC_WANA100H)
+			cmd->advertising |= ADVERTISED_100baseT_Half;
+		if (ctrl & WMC_WANA10F)
+			cmd->advertising |= ADVERTISED_10baseT_Full;
+		if (ctrl & WMC_WANA10H)
+			cmd->advertising |= ADVERTISED_10baseT_Half;
+		if (ctrl & WMC_WANAP)
+			cmd->advertising |= ADVERTISED_Pause;
+		cmd->autoneg = AUTONEG_ENABLE;
+
+		cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
+		cmd->duplex = (ctrl & WMC_WDS) ?
+			DUPLEX_FULL : DUPLEX_HALF;
+	} else {
+		/* auto-negotiation is disabled */
+		cmd->autoneg = AUTONEG_DISABLE;
 
-		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-		if ((ctrl & WMC_WAND) == 0) {
-			/* auto-negotiation is enabled */
-			cmd->advertising |= ADVERTISED_Autoneg;
-			if (ctrl & WMC_WANA100F)
-				cmd->advertising |= ADVERTISED_100baseT_Full;
-			if (ctrl & WMC_WANA100H)
-				cmd->advertising |= ADVERTISED_100baseT_Half;
-			if (ctrl & WMC_WANA10F)
-				cmd->advertising |= ADVERTISED_10baseT_Full;
-			if (ctrl & WMC_WANA10H)
-				cmd->advertising |= ADVERTISED_10baseT_Half;
-			if (ctrl & WMC_WANAP)
-				cmd->advertising |= ADVERTISED_Pause;
-			cmd->autoneg = AUTONEG_ENABLE;
-
-			cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
-			cmd->duplex = (ctrl & WMC_WDS) ?
-				DUPLEX_FULL : DUPLEX_HALF;
-		} else {
-			/* auto-negotiation is disabled */
-			cmd->autoneg = AUTONEG_DISABLE;
-
-			cmd->speed = (ctrl & WMC_WANF100) ?
-				SPEED_100 : SPEED_10;
-			cmd->duplex = (ctrl & WMC_WANFF) ?
-				DUPLEX_FULL : DUPLEX_HALF;
-		}
-		break;
-	case KS8695_DTYPE_LAN:
-		return -EOPNOTSUPP;
+		cmd->speed = (ctrl & WMC_WANF100) ?
+			SPEED_100 : SPEED_10;
+		cmd->duplex = (ctrl & WMC_WANFF) ?
+			DUPLEX_FULL : DUPLEX_HALF;
 	}
 
 	return 0;
 }
 
 /**
- *	ks8695_set_settings - Set device-specific settings.
+ *	ks8695_wan_set_settings - Set device-specific settings.
  *	@ndev: The network device to configure
  *	@cmd: The settings to configure
  */
 static int
-ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+ks8695_wan_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
 {
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 	u32 ctrl;
@@ -956,171 +937,85 @@ ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
 				ADVERTISED_100baseT_Full)) == 0)
 			return -EINVAL;
 
-		switch (ksp->dtype) {
-		case KS8695_DTYPE_HPNA:
-			/* HPNA does not support auto-negotiation. */
-			return -EINVAL;
-		case KS8695_DTYPE_WAN:
-			ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
-			ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H |
-				  WMC_WANA10F | WMC_WANA10H);
-			if (cmd->advertising & ADVERTISED_100baseT_Full)
-				ctrl |= WMC_WANA100F;
-			if (cmd->advertising & ADVERTISED_100baseT_Half)
-				ctrl |= WMC_WANA100H;
-			if (cmd->advertising & ADVERTISED_10baseT_Full)
-				ctrl |= WMC_WANA10F;
-			if (cmd->advertising & ADVERTISED_10baseT_Half)
-				ctrl |= WMC_WANA10H;
-
-			/* force a re-negotiation */
-			ctrl |= WMC_WANR;
-			writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
-			break;
-		case KS8695_DTYPE_LAN:
-			return -EOPNOTSUPP;
-		}
+		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
 
+		ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H |
+			  WMC_WANA10F | WMC_WANA10H);
+		if (cmd->advertising & ADVERTISED_100baseT_Full)
+			ctrl |= WMC_WANA100F;
+		if (cmd->advertising & ADVERTISED_100baseT_Half)
+			ctrl |= WMC_WANA100H;
+		if (cmd->advertising & ADVERTISED_10baseT_Full)
+			ctrl |= WMC_WANA10F;
+		if (cmd->advertising & ADVERTISED_10baseT_Half)
+			ctrl |= WMC_WANA10H;
+
+		/* force a re-negotiation */
+		ctrl |= WMC_WANR;
+		writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
 	} else {
-		switch (ksp->dtype) {
-		case KS8695_DTYPE_HPNA:
-			/* BUG: dtype_hpna implies no phy registers */
-			/*
-			ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC);
-
-			ctrl &= ~(HMC_HSS | HMC_HDS);
-			if (cmd->speed == SPEED_100)
-				ctrl |= HMC_HSS;
-			if (cmd->duplex == DUPLEX_FULL)
-				ctrl |= HMC_HDS;
-
-			__raw_writel(ctrl, KS8695_MISC_VA + KS8695_HMC);
-			*/
-			return -EOPNOTSUPP;
-		case KS8695_DTYPE_WAN:
-			ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
-			/* disable auto-negotiation */
-			ctrl |= WMC_WAND;
-			ctrl &= ~(WMC_WANF100 | WMC_WANFF);
-
-			if (cmd->speed == SPEED_100)
-				ctrl |= WMC_WANF100;
-			if (cmd->duplex == DUPLEX_FULL)
-				ctrl |= WMC_WANFF;
-
-			writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
-			break;
-		case KS8695_DTYPE_LAN:
-			return -EOPNOTSUPP;
-		}
+		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
+
+		/* disable auto-negotiation */
+		ctrl |= WMC_WAND;
+		ctrl &= ~(WMC_WANF100 | WMC_WANFF);
+
+		if (cmd->speed == SPEED_100)
+			ctrl |= WMC_WANF100;
+		if (cmd->duplex == DUPLEX_FULL)
+			ctrl |= WMC_WANFF;
+
+		writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
 	}
 
 	return 0;
 }
 
 /**
- *	ks8695_nwayreset - Restart the autonegotiation on the port.
+ *	ks8695_wan_nwayreset - Restart the autonegotiation on the port.
  *	@ndev: The network device to restart autoneotiation on
  */
 static int
-ks8695_nwayreset(struct net_device *ndev)
+ks8695_wan_nwayreset(struct net_device *ndev)
 {
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 	u32 ctrl;
 
-	switch (ksp->dtype) {
-	case KS8695_DTYPE_HPNA:
-		/* No phy means no autonegotiation on hpna */
-		return -EINVAL;
-	case KS8695_DTYPE_WAN:
-		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
-		if ((ctrl & WMC_WAND) == 0)
-			writel(ctrl | WMC_WANR,
-			       ksp->phyiface_regs + KS8695_WMC);
-		else
-			/* auto-negotiation not enabled */
-			return -EINVAL;
-		break;
-	case KS8695_DTYPE_LAN:
-		return -EOPNOTSUPP;
-	}
-
-	return 0;
-}
+	ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
 
-/**
- *	ks8695_get_link - Retrieve link status of network interface
- *	@ndev: The network interface to retrive the link status of.
- */
-static u32
-ks8695_get_link(struct net_device *ndev)
-{
-	struct ks8695_priv *ksp = netdev_priv(ndev);
-	u32 ctrl;
+	if ((ctrl & WMC_WAND) == 0)
+		writel(ctrl | WMC_WANR,
+		       ksp->phyiface_regs + KS8695_WMC);
+	else
+		/* auto-negotiation not enabled */
+		return -EINVAL;
 
-	switch (ksp->dtype) {
-	case KS8695_DTYPE_HPNA:
-		/* HPNA always has link */
-		return 1;
-	case KS8695_DTYPE_WAN:
-		/* WAN we can read the PHY for */
-		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-		return ctrl & WMC_WLS;
-	case KS8695_DTYPE_LAN:
-		return -EOPNOTSUPP;
-	}
 	return 0;
 }
 
 /**
- *	ks8695_get_pause - Retrieve network pause/flow-control advertising
+ *	ks8695_wan_get_pause - Retrieve network pause/flow-control advertising
  *	@ndev: The device to retrieve settings from
  *	@param: The structure to fill out with the information
  */
 static void
-ks8695_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param)
+ks8695_wan_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param)
 {
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 	u32 ctrl;
 
-	switch (ksp->dtype) {
-	case KS8695_DTYPE_HPNA:
-		/* No phy link on hpna to configure */
-		return;
-	case KS8695_DTYPE_WAN:
-		ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
-
-		/* advertise Pause */
-		param->autoneg = (ctrl & WMC_WANAP);
+	ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
 
-		/* current Rx Flow-control */
-		ctrl = ks8695_readreg(ksp, KS8695_DRXC);
-		param->rx_pause = (ctrl & DRXC_RFCE);
+	/* advertise Pause */
+	param->autoneg = (ctrl & WMC_WANAP);
 
-		/* current Tx Flow-control */
-		ctrl = ks8695_readreg(ksp, KS8695_DTXC);
-		param->tx_pause = (ctrl & DTXC_TFCE);
-		break;
-	case KS8695_DTYPE_LAN:
-		/* The LAN's "phy" is a direct-attached switch */
-		return;
-	}
-}
+	/* current Rx Flow-control */
+	ctrl = ks8695_readreg(ksp, KS8695_DRXC);
+	param->rx_pause = (ctrl & DRXC_RFCE);
 
-/**
- *	ks8695_set_pause - Configure pause/flow-control
- *	@ndev: The device to configure
- *	@param: The pause parameters to set
- *
- *	TODO: Implement this
- */
-static int
-ks8695_set_pause(struct net_device *ndev, struct ethtool_pauseparam *param)
-{
-	return -EOPNOTSUPP;
+	/* current Tx Flow-control */
+	ctrl = ks8695_readreg(ksp, KS8695_DTXC);
+	param->tx_pause = (ctrl & DTXC_TFCE);
 }
 
 /**
@@ -1140,12 +1035,17 @@ ks8695_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
 static const struct ethtool_ops ks8695_ethtool_ops = {
 	.get_msglevel	= ks8695_get_msglevel,
 	.set_msglevel	= ks8695_set_msglevel,
-	.get_settings	= ks8695_get_settings,
-	.set_settings	= ks8695_set_settings,
-	.nway_reset	= ks8695_nwayreset,
-	.get_link	= ks8695_get_link,
-	.get_pauseparam = ks8695_get_pause,
-	.set_pauseparam = ks8695_set_pause,
+	.get_drvinfo	= ks8695_get_drvinfo,
+};
+
+static const struct ethtool_ops ks8695_wan_ethtool_ops = {
+	.get_msglevel	= ks8695_get_msglevel,
+	.set_msglevel	= ks8695_set_msglevel,
+	.get_settings	= ks8695_wan_get_settings,
+	.set_settings	= ks8695_wan_set_settings,
+	.nway_reset	= ks8695_wan_nwayreset,
+	.get_link	= ethtool_op_get_link,
+	.get_pauseparam = ks8695_wan_get_pause,
 	.get_drvinfo	= ks8695_get_drvinfo,
 };
 
@@ -1541,7 +1441,6 @@ ks8695_probe(struct platform_device *pdev)
 
 	/* driver system setup */
 	ndev->netdev_ops = &ks8695_netdev_ops;
-	SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops);
 	ndev->watchdog_timeo	 = msecs_to_jiffies(watchdog);
 
 	netif_napi_add(ndev, &ksp->napi, ks8695_poll, NAPI_WEIGHT);
@@ -1608,12 +1507,15 @@ ks8695_probe(struct platform_device *pdev)
 	if (ksp->phyiface_regs && ksp->link_irq == -1) {
 		ks8695_init_switch(ksp);
 		ksp->dtype = KS8695_DTYPE_LAN;
+		SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops);
 	} else if (ksp->phyiface_regs && ksp->link_irq != -1) {
 		ks8695_init_wan_phy(ksp);
 		ksp->dtype = KS8695_DTYPE_WAN;
+		SET_ETHTOOL_OPS(ndev, &ks8695_wan_ethtool_ops);
 	} else {
 		/* No initialisation since HPNA does not have a PHY */
 		ksp->dtype = KS8695_DTYPE_HPNA;
+		SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops);
 	}
 
 	/* And bring up the net_device with the net core */
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 0b9fc5173ae..22abfb39d81 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -1284,19 +1284,12 @@ static void bfin_mac_multicast_hash(struct net_device *dev)
 {
 	u32 emac_hashhi, emac_hashlo;
 	struct netdev_hw_addr *ha;
-	char *addrs;
 	u32 crc;
 
 	emac_hashhi = emac_hashlo = 0;
 
 	netdev_for_each_mc_addr(ha, dev) {
-		addrs = ha->addr;
-
-		/* skip non-multicast addresses */
-		if (!(*addrs & 1))
-			continue;
-
-		crc = ether_crc(ETH_ALEN, addrs);
+		crc = ether_crc(ETH_ALEN, ha->addr);
 		crc >>= 26;
 
 		if (crc & 0x20)
diff --git a/drivers/net/bna/bnad_ethtool.c b/drivers/net/bna/bnad_ethtool.c
index 99be5ae9199..142d6047da2 100644
--- a/drivers/net/bna/bnad_ethtool.c
+++ b/drivers/net/bna/bnad_ethtool.c
@@ -275,7 +275,6 @@ bnad_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
 
 	ioc_attr = kzalloc(sizeof(*ioc_attr), GFP_KERNEL);
 	if (ioc_attr) {
-		memset(ioc_attr, 0, sizeof(*ioc_attr));
 		spin_lock_irqsave(&bnad->bna_lock, flags);
 		bfa_nw_ioc_get_attr(&bnad->bna.device.ioc, ioc_attr);
 		spin_unlock_irqrestore(&bnad->bna_lock, flags);
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 7206ab2cbbf..3437613f045 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -3203,7 +3203,7 @@ static int cas_get_vpd_info(struct cas *cp, unsigned char *dev_addr,
 	int phy_type = CAS_PHY_MII_MDIO0; /* default phy type */
 	int mac_off  = 0;
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_SPARC)
 	const unsigned char *addr;
 #endif
 
@@ -3354,7 +3354,7 @@ use_random_mac_addr:
 	if (found & VPD_FOUND_MAC)
 		goto done;
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_SPARC)
 	addr = of_get_property(cp->of_node, "local-mac-address", NULL);
 	if (addr != NULL) {
 		memcpy(dev_addr, addr, 6);
@@ -5031,7 +5031,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	cp->msg_enable = (cassini_debug < 0) ? CAS_DEF_MSG_ENABLE :
 	  cassini_debug;
 
-#if defined(CONFIG_OF)
+#if defined(CONFIG_SPARC)
 	cp->of_node = pci_device_to_OF_node(pdev);
 #endif
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index de69c54301c..bfab14092d2 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3478,9 +3478,17 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 icr = er32(ICR);
 
-	if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
+	if (unlikely((!icr)))
 		return IRQ_NONE;  /* Not our interrupt */
 
+	/*
+	 * we might have caused the interrupt, but the above
+	 * read cleared it, and just in case the driver is
+	 * down there is nothing to do so return handled
+	 */
+	if (unlikely(test_bit(__E1000_DOWN, &adapter->flags)))
+		return IRQ_HANDLED;
+
 	if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
 		hw->get_link_status = 1;
 		/* guard against interrupt when we're going down */
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 1397da118f0..89a69035e53 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2010 Intel Corporation.
+  Copyright(c) 1999 - 2011 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -1310,7 +1310,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
 		 * apply workaround for hardware errata documented in errata
 		 * docs Fixes issue where some error prone or unreliable PCIe
 		 * completions are occurring, particularly with ASPM enabled.
-		 * Without fix, issue can cause tx timeouts.
+		 * Without fix, issue can cause Tx timeouts.
 		 */
 		reg = er32(GCR2);
 		reg |= 1;
diff --git a/drivers/net/e1000e/Makefile b/drivers/net/e1000e/Makefile
index 360c91369f3..28519acacd2 100644
--- a/drivers/net/e1000e/Makefile
+++ b/drivers/net/e1000e/Makefile
@@ -1,7 +1,7 @@
 ################################################################################
 #
 # Intel PRO/1000 Linux driver
-# Copyright(c) 1999 - 2008 Intel Corporation.
+# Copyright(c) 1999 - 2011 Intel Corporation.
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 7245dc2e0b7..13149983d07 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2010 Intel Corporation.
+  Copyright(c) 1999 - 2011 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 5255be75374..e610e136905 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c)