[media] gspca: Add new se401 camera driver

Based on the old v4l1 camera by Jeroen Vreeken driver which recently got
removed from the kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

4 files changed, 876 insertions, 0 deletions

diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 34ae2c29979..43d9a20caeb 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -179,6 +179,16 @@ config USB_GSPCA_PAC7311
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_pac7311.
 
+config USB_GSPCA_SE401
+	tristate "SE401 USB Camera Driver"
+	depends on VIDEO_V4L2 && USB_GSPCA
+	help
+	 Say Y here if you want support for cameras based on the
+	 Endpoints (formerly known as AOX) se401 chip.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called gspca_se401.
+
 config USB_GSPCA_SN9C2028
 	tristate "SONIX Dual-Mode USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 802fbe1bff4..d6364a86333 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_GSPCA_OV534_9)  += gspca_ov534_9.o
 obj-$(CONFIG_USB_GSPCA_PAC207)   += gspca_pac207.o
 obj-$(CONFIG_USB_GSPCA_PAC7302)  += gspca_pac7302.o
 obj-$(CONFIG_USB_GSPCA_PAC7311)  += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SE401)    += gspca_se401.o
 obj-$(CONFIG_USB_GSPCA_SN9C2028) += gspca_sn9c2028.o
 obj-$(CONFIG_USB_GSPCA_SN9C20X)  += gspca_sn9c20x.o
 obj-$(CONFIG_USB_GSPCA_SONIXB)   += gspca_sonixb.o
@@ -58,6 +59,7 @@ gspca_ov534_9-objs  := ov534_9.o
 gspca_pac207-objs   := pac207.o
 gspca_pac7302-objs  := pac7302.o
 gspca_pac7311-objs  := pac7311.o
+gspca_se401-objs    := se401.o
 gspca_sn9c2028-objs := sn9c2028.o
 gspca_sn9c20x-objs  := sn9c20x.o
 gspca_sonixb-objs   := sonixb.o
diff --git a/drivers/media/video/gspca/se401.c b/drivers/media/video/gspca/se401.c
new file mode 100644
index 00000000000..4c283c24c75
--- /dev/null
+++ b/drivers/media/video/gspca/se401.c
@@ -0,0 +1,774 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define MODULE_NAME "se401"
+
+#define BULK_SIZE 4096
+#define PACKET_SIZE 1024
+#define READ_REQ_SIZE 64
+#define MAX_MODES ((READ_REQ_SIZE - 6) / 4)
+/* The se401 compression algorithm uses a fixed quant factor, which
+   can be configured by setting the high nibble of the SE401_OPERATINGMODE
+   feature. This needs to exactly match what is in libv4l! */
+#define SE401_QUANT_FACT 8
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "gspca.h"
+#include "se401.h"
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Endpoints se401");
+MODULE_LICENSE("GPL");
+
+/* controls */
+enum e_ctrl {
+	BRIGHTNESS,
+	GAIN,
+	EXPOSURE,
+	FREQ,
+	NCTRL	/* number of controls */
+};
+
+/* exposure change state machine states */
+enum {
+	EXPO_CHANGED,
+	EXPO_DROP_FRAME,
+	EXPO_NO_CHANGE,
+};
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;	/* !! must be the first item */
+	struct gspca_ctrl ctrls[NCTRL];
+	struct v4l2_pix_format fmts[MAX_MODES];
+	int pixels_read;
+	int packet_read;
+	u8 packet[PACKET_SIZE];
+	u8 restart_stream;
+	u8 button_state;
+	u8 resetlevel;
+	u8 resetlevel_frame_count;
+	int resetlevel_adjust_dir;
+	int expo_change_state;
+};
+
+static void setbrightness(struct gspca_dev *gspca_dev);
+static void setgain(struct gspca_dev *gspca_dev);
+static void setexposure(struct gspca_dev *gspca_dev);
+
+static const struct ctrl sd_ctrls[NCTRL] = {
+[BRIGHTNESS] = {
+		{
+			.id      = V4L2_CID_BRIGHTNESS,
+			.type    = V4L2_CTRL_TYPE_INTEGER,
+			.name    = "Brightness",
+			.minimum = 0,
+			.maximum = 255,
+			.step    = 1,
+			.default_value = 15,
+		},
+		.set_control = setbrightness
+	},
+[GAIN] = {
+		{
+			.id      = V4L2_CID_GAIN,
+			.type    = V4L2_CTRL_TYPE_INTEGER,
+			.name    = "Gain",
+			.minimum = 0,
+			.maximum = 50, /* Really 63 but > 50 is not pretty */
+			.step    = 1,
+			.default_value = 25,
+		},
+		.set_control = setgain
+	},
+[EXPOSURE] = {
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "Exposure",
+			.minimum = 0,
+			.maximum = 32767,
+			.step = 1,
+			.default_value = 15000,
+		},
+		.set_control = setexposure
+	},
+[FREQ] = {
+		{
+			.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
+			.type    = V4L2_CTRL_TYPE_MENU,
+			.name    = "Light frequency filter",
+			.minimum = 0,
+			.maximum = 2,
+			.step    = 1,
+			.default_value = 0,
+		},
+		.set_control = setexposure
+	},
+};
+
+static void se401_write_req(struct gspca_dev *gspca_dev, u16 req, u16 value,
+			    int silent)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0), req,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      value, 0, NULL, 0, 1000);
+	if (err < 0) {
+		if (!silent)
+			err("write req failed req %#04x val %#04x error %d",
+			    req, value, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	if (USB_BUF_SZ < READ_REQ_SIZE) {
+		err("USB_BUF_SZ too small!!");
+		gspca_dev->usb_err = -ENOBUFS;
+		return;
+	}
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_rcvctrlpipe(gspca_dev->dev, 0), req,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, 0, gspca_dev->usb_buf, READ_REQ_SIZE, 1000);
+	if (err < 0) {
+		if (!silent)
+			err("read req failed req %#04x error %d", req, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static void se401_set_feature(struct gspca_dev *gspca_dev,
+			      u16 selector, u16 param)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return;
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_sndctrlpipe(gspca_dev->dev, 0),
+			      SE401_REQ_SET_EXT_FEATURE,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      param, selector, NULL, 0, 1000);
+	if (err < 0) {
+		err("set feature failed sel %#04x param %#04x error %d",
+		    selector, param, err);
+		gspca_dev->usb_err = err;
+	}
+}
+
+static int se401_get_feature(struct gspca_dev *gspca_dev, u16 selector)
+{
+	int err;
+
+	if (gspca_dev->usb_err < 0)
+		return gspca_dev->usb_err;
+
+	if (USB_BUF_SZ < 2) {
+		err("USB_BUF_SZ too small!!");
+		gspca_dev->usb_err = -ENOBUFS;
+		return gspca_dev->usb_err;
+	}
+
+	err = usb_control_msg(gspca_dev->dev,
+			      usb_rcvctrlpipe(gspca_dev->dev, 0),
+			      SE401_REQ_GET_EXT_FEATURE,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, selector, gspca_dev->usb_buf, 2, 1000);
+	if (err < 0) {
+		err("get feature failed sel %#04x error %d", selector, err);
+		gspca_dev->usb_err = err;
+		return err;
+	}
+	return gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8);
+}
+
+static void setbrightness(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS))
+		return;
+
+	/* HDG: this does not seem to do anything on my cam */
+	se401_write_req(gspca_dev, SE401_REQ_SET_BRT,
+			sd->ctrls[BRIGHTNESS].val, 0);
+}
+
+static void setgain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u16 gain = 63 - sd->ctrls[GAIN].val;
+
+	/* red color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_ARCG, gain);
+	/* green color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_AGCG, gain);
+	/* blue color gain */
+	se401_set_feature(gspca_dev, HV7131_REG_ABCG, gain);
+}
+
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int integration = sd->ctrls[EXPOSURE].val << 6;
+	u8 expose_h, expose_m, expose_l;
+
+	/* Do this before the set_feature calls, for proper timing wrt
+	   the interrupt driven pkt_scan. Note we may still race but that
+	   is not a big issue, the expo change state machine is merely for
+	   avoiding underexposed frames getting send out, if one sneaks
+	   through so be it */
+	sd->expo_change_state = EXPO_CHANGED;
+
+	if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ)
+		integration = integration - integration % 106667;
+	if (sd->ctrls[FREQ].val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ)
+		integration = integration - integration % 88889;
+
+	expose_h = (integration >> 16);
+	expose_m = (integration >> 8);
+	expose_l = integration;
+
+	/* integration time low */
+	se401_set_feature(gspca_dev, HV7131_REG_TITL, expose_l);
+	/* integration time mid */
+	se401_set_feature(gspca_dev, HV7131_REG_TITM, expose_m);
+	/* integration time high */
+	se401_set_feature(gspca_dev, HV7131_REG_TITU, expose_h);
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+	u8 *cd = gspca_dev->usb_buf;
+	int i, j, n;
+	int widths[MAX_MODES], heights[MAX_MODES];
+
+	/* Read the camera descriptor */
+	se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 1);
+	if (gspca_dev->usb_err) {
+		/* Sometimes after being idle for a while the se401 won't
+		   respond and needs a good kicking  */
+		usb_reset_device(gspca_dev->dev);
+		gspca_dev->usb_err = 0;
+		se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0);
+	}
+
+	/* Some cameras start with their LED on */
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+	if (gspca_dev->usb_err)
+		return gspca_dev->usb_err;
+
+	if (cd[1] != 0x41) {
+		err("Wrong descriptor type");
+		return -ENODEV;
+	}
+
+	if (!(cd[2] & SE401_FORMAT_BAYER)) {
+		err("Bayer format not supported!");
+		return -ENODEV;
+	}
+
+	if (cd[3])
+		info("ExtraFeatures: %d", cd[3]);
+
+	n = cd[4] | (cd[5] << 8);
+	if (n > MAX_MODES) {
+		err("Too many frame sizes");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < n ; i++) {
+		widths[i] = cd[6 + i * 4 + 0] | (cd[6 + i * 4 + 1] << 8);
+		heights[i] = cd[6 + i * 4 + 2] | (cd[6 + i * 4 + 3] << 8);
+	}
+
+	for (i = 0; i < n ; i++) {
+		sd->fmts[i].width = widths[i];
+		sd->fmts[i].height = heights[i];
+		sd->fmts[i].field = V4L2_FIELD_NONE;
+		sd->fmts[i].colorspace = V4L2_COLORSPACE_SRGB;
+		sd->fmts[i].priv = 1;
+
+		/* janggu compression only works for 1/4th or 1/16th res */
+		for (j = 0; j < n; j++) {
+			if (widths[j] / 2 == widths[i] &&
+			    heights[j] / 2 == heights[i]) {
+				sd->fmts[i].priv = 2;
+				break;
+			}
+		}
+		/* 1/16th if available too is better then 1/4th, because
+		   we then use a larger area of the sensor */
+		for (j = 0; j < n; j++) {
+			if (widths[j] / 4 == widths[i] &&
+			    heights[j] / 4 == heights[i]) {
+				sd->fmts[i].priv = 4;
+				break;
+			}
+		}
+
+		if (sd->fmts[i].priv == 1) {
+			/* Not a 1/4th or 1/16th res, use bayer */
+			sd->fmts[i].pixelformat = V4L2_PIX_FMT_SBGGR8;
+			sd->fmts[i].bytesperline = widths[i];
+			sd->fmts[i].sizeimage = widths[i] * heights[i];
+			info("Frame size: %dx%d bayer", widths[i], heights[i]);
+		} else {
+			/* Found a match use janggu compression */
+			sd->fmts[i].pixelformat = V4L2_PIX_FMT_SE401;
+			sd->fmts[i].bytesperline = 0;
+			sd->fmts[i].sizeimage = widths[i] * heights[i] * 3;
+			info("Frame size: %dx%d 1/%dth janggu",
+			     widths[i], heights[i],
+			     sd->fmts[i].priv * sd->fmts[i].priv);
+		}
+	}
+
+	cam->cam_mode = sd->fmts;
+	cam->nmodes = n;
+	cam->bulk = 1;
+	cam->bulk_size = BULK_SIZE;
+	cam->bulk_nurbs = 4;
+	cam->ctrls = sd->ctrls;
+	gspca_dev->nbalt = 1;  /* Ignore the bogus isoc alt settings */
+	sd->resetlevel = 0x2d; /* Set initial resetlevel */
+
+	/* See if the camera supports brightness */
+	se401_read_req(gspca_dev, SE401_REQ_GET_BRT, 1);
+	if (gspca_dev->usb_err) {
+		gspca_dev->ctrl_dis = (1 << BRIGHTNESS);
+		gspca_dev->usb_err = 0;
+	}
+
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+	int mode = 0;
+
+	se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 1);
+	if (gspca_dev->usb_err) {
+		/* Sometimes after being idle for a while the se401 won't
+		   respond and needs a good kicking  */
+		usb_reset_device(gspca_dev->dev);
+		gspca_dev->usb_err = 0;
+		se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 0);
+	}
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 1, 0);
+
+	se401_set_feature(gspca_dev, HV7131_REG_MODE_B, 0x05);
+
+	/* set size + mode */
+	se401_write_req(gspca_dev, SE401_REQ_SET_WIDTH,
+			gspca_dev->width * mult, 0);
+	se401_write_req(gspca_dev, SE401_REQ_SET_HEIGHT,
+			gspca_dev->height * mult, 0);
+	/*
+	 * HDG: disabled this as it does not seem to do anything
+	 * se401_write_req(gspca_dev, SE401_REQ_SET_OUTPUT_MODE,
+	 *		   SE401_FORMAT_BAYER, 0);
+	 */
+
+	switch (mult) {
+	case 1: /* Raw bayer */
+		mode = 0x03; break;
+	case 2: /* 1/4th janggu */
+		mode = SE401_QUANT_FACT << 4; break;
+	case 4: /* 1/16th janggu */
+		mode = (SE401_QUANT_FACT << 4) | 0x02; break;
+	}
+	se401_set_feature(gspca_dev, SE401_OPERATINGMODE, mode);
+
+	setbrightness(gspca_dev);
+	setgain(gspca_dev);
+	setexposure(gspca_dev);
+	se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+
+	sd->packet_read = 0;
+	sd->pixels_read = 0;
+	sd->restart_stream = 0;
+	sd->resetlevel_frame_count = 0;
+	sd->resetlevel_adjust_dir = 0;
+	sd->expo_change_state = EXPO_NO_CHANGE;
+
+	se401_write_req(gspca_dev, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, 0);
+
+	return gspca_dev->usb_err;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	se401_write_req(gspca_dev, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, 0);
+	se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0);
+	se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 0, 0);
+}
+
+static void sd_dq_callback(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	unsigned int ahrc, alrc;
+	int oldreset, adjust_dir;
+
+	/* Restart the stream if requested do so by pkt_scan */
+	if (sd->restart_stream) {
+		sd_stopN(gspca_dev);
+		sd_start(gspca_dev);
+		sd->restart_stream = 0;
+	}
+
+	/* Automatically adjust sensor reset level
+	   Hyundai have some really nice docs about this and other sensor
+	   related stuff on their homepage: www.hei.co.kr */
+	sd->resetlevel_frame_count++;
+	if (sd->resetlevel_frame_count < 20)
+		return;
+
+	/* For some reason this normally read-only register doesn't get reset
+	   to zero after reading them just once... */
+	se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH);
+	se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+	se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH);
+	se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+	ahrc = 256*se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH) +
+	    se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL);
+	alrc = 256*se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH) +
+	    se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL);
+
+	/* Not an exact science, but it seems to work pretty well... */
+	oldreset = sd->resetlevel;
+	if (alrc > 10) {
+		while (alrc >= 10 && sd->resetlevel < 63) {
+			sd->resetlevel++;
+			alrc /= 2;
+		}
+	} else if (ahrc > 20) {
+		while (ahrc >= 20 && sd->resetlevel > 0) {
+			sd->resetlevel--;
+			ahrc /= 2;
+		}
+	}
+	/* Detect ping-pong-ing and halve adjustment to avoid overshoot */
+	if (sd->resetlevel > oldreset)
+		adjust_dir = 1;
+	else
+		adjust_dir = -1;
+	if (sd->resetlevel_adjust_dir &&
+	    sd->resetlevel_adjust_dir != adjust_dir)
+		sd->resetlevel = oldreset + (sd->resetlevel - oldreset) / 2;
+
+	if (sd->resetlevel != oldreset) {
+		sd->resetlevel_adjust_dir = adjust_dir;
+		se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel);
+	}
+
+	sd->resetlevel_frame_count = 0;
+}
+
+static void sd_complete_frame(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	switch (sd->expo_change_state) {
+	case EXPO_CHANGED:
+		/* The exposure was changed while this frame
+		   was being send, so this frame is ok */
+		sd->expo_change_state = EXPO_DROP_FRAME;
+		break;
+	case EXPO_DROP_FRAME:
+		/* The exposure was changed while this frame
+		   was being captured, drop it! */
+		gspca_dev->last_packet_type = DISCARD_PACKET;
+		sd->expo_change_state = EXPO_NO_CHANGE;
+		break;
+	case EXPO_NO_CHANGE:
+		break;
+	}
+	gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
+}
+
+static void sd_pkt_scan_janggu(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	int imagesize = gspca_dev->width * gspca_dev->height;
+	int i, plen, bits, pixels, info, count;
+
+	if (sd->restart_stream)
+		return;
+
+	/* Sometimes a 1024 bytes garbage bulk packet is send between frames */
+	if (gspca_dev->last_packet_type == LAST_PACKET && len == 1024) {
+		gspca_dev->last_packet_type = DISCARD_PACKET;
+		return;
+	}
+
+	i = 0;
+	while (i < len) {
+		/* Read header if not already be present from prev bulk pkt */
+		if (sd->packet_read < 4) {
+			count = 4 - sd->packet_read;
+			if (count > len - i)
+				count = len - i;
+			memcpy(&sd->packet[sd->packet_read], &data[i], count);
+			sd->packet_read += count;
+			i += count;
+			if (sd->packet_read < 4)
+				break;
+		}
+		bits   = sd->packet[3] + (sd->packet[2] << 8);
+		pixels = sd->packet[1] + ((sd->packet[0] & 0x3f) << 8);
+		info   = (sd->packet[0] & 0xc0) >> 6;
+		plen   = ((bits + 47) >> 4) << 1;
+		/* Sanity checks */
+		if (plen > 1024) {
+			err("invalid packet len %d restarting stream", plen);
+			goto error;
+		}
+		if (info == 3) {
+			err("unknown frame info value restarting stream");
+			goto error;
+		}
+
+		/* Read (remainder of) packet contents */
+		count = plen - sd->packet_read;
+		if (count > len - i)
+			count = len - i;
+		memcpy(&sd->packet[sd->packet_read], &data[i], count);
+		sd->packet_read += count;
+		i += count;
+		if (sd->packet_read < plen)
+			break;
+
+		sd->pixels_read += pixels;
+		sd->packet_read = 0;
+
+		switch (info) {
+		case 0: /* Frame data */
+			gspca_frame_add(gspca_dev, INTER_PACKET, sd->packet,
+					plen);
+			break;
+		case 1: /* EOF */
+			if (sd->pixels_read != imagesize) {
+				err("frame size %d expected %d",
+				    sd->pixels_read, imagesize);
+				goto error;
+			}
+			sd_complete_frame(gspca_dev, sd->packet, plen);
+			return; /* Discard the rest of the bulk packet !! */
+		case 2: /* SOF */
+			gspca_frame_add(gspca_dev, FIRST_PACKET, sd->packet,
+					plen);
+			sd->pixels_read = pixels;
+			break;
+		}
+	}
+	return;
+
+error:
+	sd->restart_stream = 1;
+	/* Give userspace a 0 bytes frame, so our dq callback gets
+	   called and it can restart the stream */
+	gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+	gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+}
+
+static void sd_pkt_scan_bayer(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct cam *cam = &gspca_dev->cam;
+	int imagesize = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+	if (gspca_dev->image_len == 0) {
+		gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
+		return;
+	}
+
+	if (gspca_dev->image_len + len >= imagesize) {
+		sd_complete_frame(gspca_dev, data, len);
+		return;
+	}
+
+	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+
+	if (len == 0)
+		return;
+
+	if (mult == 1) /* mult == 1 means raw bayer */
+		sd_pkt_scan_bayer(gspca_dev, data, len);
+	else
+		sd_pkt_scan_janggu(gspca_dev, data, len);
+}
+
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+			struct v4l2_querymenu *menu)
+{
+	switch (menu->id) {
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		switch (menu->index) {
+		case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED:
+			strcpy((char *) menu->name, "NoFliker");
+			return 0;
+		case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
+			strcpy((char *) menu->name, "50 Hz");
+			return 0;
+		case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
+			strcpy((char *) menu->name, "60 Hz");
+			return 0;
+		}
+		break;
+	}
+	return -EINVAL;
+}
+
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len)
+{
+	struct sd *sd = (struct sd *)gspca_dev;
+	u8 state;
+
+	if (len != 2)
+		return -EINVAL;
+
+	switch (data[0]) {
+	case 0:
+	case 1:
+		state = data[0];
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (sd->button_state != state) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA, state);
+		input_sync(gspca_dev->input_dev);
+		sd->button_state = state;
+	}
+
+	return 0;
+}
+#endif
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.dq_callback = sd_dq_callback,
+	.pkt_scan = sd_pkt_scan,
+	.querymenu = sd_querymenu,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	.int_pkt_scan = sd_int_pkt_scan,
+#endif
+};
+
+/* -- module initialisation -- */
+static const struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x03e8, 0x0004)}, /* Endpoints/Aox SE401 */
+	{USB_DEVICE(0x0471, 0x030b)}, /* Philips PCVC665K */
+	{USB_DEVICE(0x047d, 0x5001)}, /* Kensington 67014 */
+	{USB_DEVICE(0x047d, 0x5002)}, /* Kensington 6701(5/7) */
+	{USB_DEVICE(0x047d, 0x5003)}, /* Kensington 67016 */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static int sd_pre_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static int sd_post_reset(struct usb_interface *intf)
+{
+	return 0;
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
+	.pre_reset = sd_pre_reset,
+	.post_reset = sd_post_reset,
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	return usb_register(&sd_driver);
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/se401.h b/drivers/media/video/gspca/se401.h
new file mode 100644
index 00000000000..96d8ebf3cf5
--- /dev/null
+++ b/drivers/media/video/gspca/se401.h
@@ -0,0 +1,90 @@
+/*
+ * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver
+ *
+ * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on the v4l1 se401 driver which is:
+ *
+ * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define SE401_REQ_GET_CAMERA_DESCRIPTOR		0x06
+#define SE401_REQ_START_CONTINUOUS_CAPTURE	0x41
+#define SE401_REQ_STOP_CONTINUOUS_CAPTURE	0x42
+#define SE401_REQ_CAPTURE_FRAME			0x43
+#define SE401_REQ_GET_BRT			0x44
+#define SE401_REQ_SET_BRT			0x45
+#define SE401_REQ_GET_WIDTH			0x4c
+#define SE401_REQ_SET_WIDTH			0x4d
+#define SE401_REQ_GET_HEIGHT			0x4e
+#define SE401_REQ_SET_HEIGHT			0x4f
+#define SE401_REQ_GET_OUTPUT_MODE		0x50
+#define SE401_REQ_SET_OUTPUT_MODE		0x51
+#define SE401_REQ_GET_EXT_FEATURE		0x52
+#define SE401_REQ_SET_EXT_FEATURE		0x53
+#define SE401_REQ_CAMERA_POWER			0x56
+#define SE401_REQ_LED_CONTROL			0x57
+#define SE401_REQ_BIOS				0xff
+
+#define SE401_BIOS_READ				0x07
+
+#define SE401_FORMAT_BAYER	0x40
+
+/* Hyundai hv7131b registers
+   7121 and 7141 should be the same (haven't really checked...) */
+/* Mode registers: */
+#define HV7131_REG_MODE_A		0x00
+#define HV7131_REG_MODE_B		0x01
+#define HV7131_REG_MODE_C		0x02
+/* Frame registers: */
+#define HV7131_REG_FRSU		0x10
+#define HV7131_REG_FRSL		0x11
+#define HV7131_REG_FCSU		0x12
+#define HV7131_REG_FCSL		0x13
+#define HV7131_REG_FWHU		0x14
+#define HV7131_REG_FWHL		0x15
+#define HV7131_REG_FWWU		0x16
+#define HV7131_REG_FWWL		0x17
+/* Timing registers: */
+#define HV7131_REG_THBU		0x20
+#define HV7131_REG_THBL		0x21
+#define HV7131_REG_TVBU		0x22
+#define HV7131_REG_TVBL		0x23
+#define HV7131_REG_TITU		0x25
+#define HV7131_REG_TITM		0x26
+#define HV7131_REG_TITL		0x27
+#define HV7131_REG_TMCD		0x28
+/* Adjust Registers: */
+#define HV7131_REG_ARLV		0x30
+#define HV7131_REG_ARCG		0x31
+#define HV7131_REG_AGCG		0x32
+#define HV7131_REG_ABCG		0x33
+#define HV7131_REG_APBV		0x34
+#define HV7131_REG_ASLP		0x54
+/* Offset Registers: */
+#define HV7131_REG_OFSR		0x50
+#define HV7131_REG_OFSG		0x51
+#define HV7131_REG_OFSB		0x52
+/* REset level statistics registers: */
+#define HV7131_REG_LOREFNOH	0x57
+#define HV7131_REG_LOREFNOL	0x58
+#define HV7131_REG_HIREFNOH	0x59
+#define HV7131_REG_HIREFNOL	0x5a
+
+/* se401 registers */
+#define SE401_OPERATINGMODE	0x2000