at91: switch to CLKDEV_LOOKUP

we do not change the clock naming convention so does not need to switch
the AVR32 yet

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

22 files changed, 372 insertions, 202 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7275009686e..5fd0be92f70 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -294,6 +294,7 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c
index bacd3764b6c..d06990777ff 100644
--- a/arch/arm/mach-at91/at572d940hf.c
+++ b/arch/arm/mach-at91/at572d940hf.c
@@ -205,6 +205,21 @@ static struct clk *periph_clocks[] __initdata = {
 	/* irq0 .. irq2 */
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The five programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -262,6 +277,11 @@ static void __init at572d940hf_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
@@ -272,6 +292,18 @@ static void __init at572d940hf_register_clocks(void)
 	clk_register(&hck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at572d940hf_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
index e52c8e078b0..14863b8e7e6 100644
--- a/arch/arm/mach-at91/at572d940hf_devices.c
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -532,7 +532,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
 		platform_device_register(&at572d940hf_spi0_device);
 	}
 	if (enable_spi1) {
@@ -540,7 +539,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PC1, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PC2, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
 		platform_device_register(&at572d940hf_spi1_device);
 	}
 }
@@ -587,10 +585,6 @@ static struct platform_device at572d940hf_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
 	platform_device_register(&at572d940hf_tcb_device);
 }
 #else
@@ -828,22 +822,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		case 0:		/* DBGU */
 			pdev = &at572d940hf_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT572D940HF_ID_US0:
 			pdev = &at572d940hf_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT572D940HF_ID_US1:
 			pdev = &at572d940hf_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT572D940HF_ID_US2:
 			pdev = &at572d940hf_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
@@ -857,8 +847,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at572d940hf_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 69df2bb4a70..17fae4a42ab 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq1
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91cap9_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index ffda9099f6f..cd850ed6f33 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 
 	/* Pullup pin is handled internally by USB device peripheral */
 
-	/* Clocks */
-	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
 	platform_device_register(&at91_usba_udc_device);
 }
 #else
@@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc0_data = *data;
-		at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
 		platform_device_register(&at91cap9_mmc0_device);
 	} else {			/* MCI1 */
 		/* CLK */
@@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc1_data = *data;
-		at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
 		platform_device_register(&at91cap9_mmc1_device);
 	}
 }
@@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91cap9_spi0_device);
 	}
 	if (enable_spi1) {
@@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91cap9_spi1_device);
 	}
 }
@@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has one clock and irq for all three TC channels */
-	at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
 	platform_device_register(&at91cap9_tcb_device);
 }
 #else
@@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91CAP9_ID_SSC0:
 		pdev = &at91cap9_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
 		break;
 	case AT91CAP9_ID_SSC1:
 		pdev = &at91cap9_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
 		break;
 	default:
 		return;
@@ -1205,22 +1193,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		case 0:		/* DBGU */
 			pdev = &at91cap9_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US0:
 			pdev = &at91cap9_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US1:
 			pdev = &at91cap9_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US2:
 			pdev = &at91cap9_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
@@ -1234,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91cap9_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 164a98ed888..d3638bd994d 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -191,6 +191,26 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq6
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -227,12 +247,29 @@ static void __init at91rm9200_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91rm9200_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 761559e589a..a0ba475be04 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
 	platform_device_register(&at91rm9200_tcb0_device);
-
-	at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
-	at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
-	at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
 	platform_device_register(&at91rm9200_tcb1_device);
 }
 #else
@@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91RM9200_ID_SSC0:
 		pdev = &at91rm9200_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
 		break;
 	case AT91RM9200_ID_SSC1:
 		pdev = &at91rm9200_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
 		break;
 	case AT91RM9200_ID_SSC2:
 		pdev = &at91rm9200_ssc2_device;
 		configure_ssc2_pins(pins);
-		at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
 		break;
 	default:
 		return;
@@ -1115,27 +1104,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		case 0:		/* DBGU */
 			pdev = &at91rm9200_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US0:
 			pdev = &at91rm9200_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US1:
 			pdev = &at91rm9200_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US2:
 			pdev = &at91rm9200_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US3:
 			pdev = &at91rm9200_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
@@ -1149,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91rm9200_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 5430669d746..7d606b04d31 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq2
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
+};
+
 /*
  * The two programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9260_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 6f8ec8d16d5..1fdeb9058a7 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9260_spi0_device);
 	}
 	if (enable_spi1) {
@@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9260_spi1_device);
 	}
 }
@@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
 	platform_device_register(&at91sam9260_tcb0_device);
-
-	at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
-	at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
-	at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
 	platform_device_register(&at91sam9260_tcb1_device);
 }
 #else
@@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9260_ID_SSC:
 		pdev = &at91sam9260_ssc_device;
 		configure_ssc_pins(pins);
-		at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1145,37 +1134,30 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		case 0:		/* DBGU */
 			pdev = &at91sam9260_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US0:
 			pdev = &at91sam9260_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US1:
 			pdev = &at91sam9260_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US2:
 			pdev = &at91sam9260_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US3:
 			pdev = &at91sam9260_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US4:
 			pdev = &at91sam9260_uart4_device;
 			configure_usart4_pins();
-			at91_clock_associate("usart4_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US5:
 			pdev = &at91sam9260_uart5_device;
 			configure_usart5_pins();
-			at91_clock_associate("usart5_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
@@ -1189,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9260_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index e3bafaebe01..c1483168c97 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq2
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
@@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void)
 	clk_register(&hck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9261_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 8792f9bfb6b..3eb4538fcee 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9261_spi0_device);
 	}
 	if (enable_spi1) {
@@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9261_spi1_device);
 	}
 }
@@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
 	platform_device_register(&at91sam9261_tcb_device);
 }
 #else
@@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9261_ID_SSC0:
 		pdev = &at91sam9261_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9261_ID_SSC1:
 		pdev = &at91sam9261_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9261_ID_SSC2:
 		pdev = &at91sam9261_ssc2_device;
 		configure_ssc2_pins(pins);
-		at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -995,22 +986,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 		case 0:		/* DBGU */
 			pdev = &at91sam9261_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US0:
 			pdev = &at91sam9261_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US1:
 			pdev = &at91sam9261_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US2:
 			pdev = &at91sam9261_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
@@ -1024,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9261_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6a085fedf6a..dc28477d14f 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq1
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9263_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 47a9f965bbb..ffe081b77ed 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/