Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
  bnx2: Eliminate AER error messages on systems not supporting it
  cnic: Fix big endian bug
  xfrm6: Don't forget to propagate peer into ipsec route.
  tg3: Use new VLAN code
  bonding: update documentation - alternate configuration.
  TCP: fix a bug that triggers large number of TCP RST by mistake
  MAINTAINERS: remove Reinette Chatre as iwlwifi maintainer
  rt2x00: add device id for windy31 usb device
  mac80211: fix a crash in ieee80211_beacon_get_tim on change_interface
  ipv6: Revert 'administrative down' address handling changes.
  textsearch: doc - fix spelling in lib/textsearch.c.
  USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()
  pch_gbe: don't use flush_scheduled_work()
  bnx2: Always set ETH_FLAG_TXVLAN
  net: clear heap allocation for ethtool_get_regs()
  ipv6: Always clone offlink routes.
  dcbnl: make get_app handling symmetric for IEEE and CEE DCBx
  tcp: fix bug in listening_get_next()
  inetpeer: Use correct AVL tree base pointer in inet_getpeer().
  GRO: fix merging a paged skb after non-paged skbs
  ...

67 files changed, 2650 insertions, 384 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-at91 b/Documentation/ABI/testing/sysfs-platform-at91
new file mode 100644
index 00000000000..4cc6a865ae6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-at91
@@ -0,0 +1,25 @@
+What:		/sys/devices/platform/at91_can/net/<iface>/mb0_id
+Date:		January 2011
+KernelVersion:	2.6.38
+Contact:	Marc Kleine-Budde <kernel@pengutronix.de>
+Description:
+		Value representing the can_id of mailbox 0.
+
+		Default: 0x7ff (standard frame)
+
+		Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in
+		"AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the
+		contents of mailbox 0 may be send under certain
+		conditions (even if disabled or in rx mode).
+
+		The workaround in the errata suggests not to use the
+		mailbox and load it with an unused identifier.
+
+		In order to use an extended can_id add the
+		CAN_EFF_FLAG (0x80000000U) to the can_id. Example:
+
+		- standard id 0x7ff:
+		echo 0x7ff      > /sys/class/net/can0/mb0_id
+
+		- extended id 0x1fffffff:
+		echo 0x9fffffff > /sys/class/net/can0/mb0_id
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 5dc638791d9..25d2f4141d2 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -49,7 +49,8 @@ Table of Contents
 3.3	Configuring Bonding Manually with Ifenslave
 3.3.1		Configuring Multiple Bonds Manually
 3.4	Configuring Bonding Manually via Sysfs
-3.5	Overriding Configuration for Special Cases
+3.5	Configuration with Interfaces Support
+3.6	Overriding Configuration for Special Cases
 
 4. Querying Bonding Configuration
 4.1	Bonding Configuration
@@ -161,8 +162,8 @@ onwards) do not have /usr/include/linux symbolically linked to the
 default kernel source include directory.
 
 SECOND IMPORTANT NOTE:
-	If you plan to configure bonding using sysfs, you do not need
-to use ifenslave.
+	If you plan to configure bonding using sysfs or using the
+/etc/network/interfaces file, you do not need to use ifenslave.
 
 2. Bonding Driver Options
 =========================
@@ -779,22 +780,26 @@ resend_igmp
 
 	You can configure bonding using either your distro's network
 initialization scripts, or manually using either ifenslave or the
-sysfs interface.  Distros generally use one of two packages for the
-network initialization scripts: initscripts or sysconfig.  Recent
-versions of these packages have support for bonding, while older
+sysfs interface.  Distros generally use one of three packages for the
+network initialization scripts: initscripts, sysconfig or interfaces.
+Recent versions of these packages have support for bonding, while older
 versions do not.
 
 	We will first describe the options for configuring bonding for
-distros using versions of initscripts and sysconfig with full or
-partial support for bonding, then provide information on enabling
+distros using versions of initscripts, sysconfig and interfaces with full
+or partial support for bonding, then provide information on enabling
 bonding without support from the network initialization scripts (i.e.,
 older versions of initscripts or sysconfig).
 
-	If you're unsure whether your distro uses sysconfig or
-initscripts, or don't know if it's new enough, have no fear.
+	If you're unsure whether your distro uses sysconfig,
+initscripts or interfaces, or don't know if it's new enough, have no fear.
 Determining this is fairly straightforward.
 
-	First, issue the command:
+	First, look for a file called interfaces in /etc/network directory.
+If this file is present in your system, then your system use interfaces. See
+Configuration with Interfaces Support.
+
+	Else, issue the command:
 
 $ rpm -qf /sbin/ifup
 
@@ -1327,8 +1332,62 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
 echo +eth2 > /sys/class/net/bond1/bonding/slaves
 echo +eth3 > /sys/class/net/bond1/bonding/slaves
 
-3.5 Overriding Configuration for Special Cases
+3.5 Configuration with Interfaces Support
+-----------------------------------------
+
+        This section applies to distros which use /etc/network/interfaces file
+to describe network interface configuration, most notably Debian and it's
+derivatives.
+
+	The ifup and ifdown commands on Debian don't support bonding out of
+the box. The ifenslave-2.6 package should be installed to provide bonding
+support.  Once installed, this package will provide bond-* options to be used
+into /etc/network/interfaces.
+
+	Note that ifenslave-2.6 package will load the bonding module and use
+the ifenslave command when appropriate.
+
+Example Configurations
+----------------------
+
+In /etc/network/interfaces, the following stanza will configure bond0, in
+active-backup mode, with eth0 and eth1 as slaves.
+
+auto bond0
+iface bond0 inet dhcp
+	bond-slaves eth0 eth1
+	bond-mode active-backup
+	bond-miimon 100
+	bond-primary eth0 eth1
+
+If the above configuration doesn't work, you might have a system using
+upstart for system startup. This is most notably true for recent
+Ubuntu versions. The following stanza in /etc/network/interfaces will
+produce the same result on those systems.
+
+auto bond0
+iface bond0 inet dhcp
+	bond-slaves none
+	bond-mode active-backup
+	bond-miimon 100
+
+auto eth0
+iface eth0 inet manual
+	bond-master bond0
+	bond-primary eth0 eth1
+
+auto eth1
+iface eth1 inet manual
+	bond-master bond0
+	bond-primary eth0 eth1
+
+For a full list of bond-* supported options in /etc/network/interfaces and some
+more advanced examples tailored to you particular distros, see the files in
+/usr/share/doc/ifenslave-2.6.
+
+3.6 Overriding Configuration for Special Cases
 ----------------------------------------------
+
 When using the bonding driver, the physical port which transmits a frame is
 typically selected by the bonding driver, and is not relevant to the user or
 system administrator.  The output port is simply selected using the policies of
diff --git a/MAINTAINERS b/MAINTAINERS
index cf0f3a5c09c..9d12977b6ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3327,7 +3327,6 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-M:	Reinette Chatre <reinette.chatre@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c
index bca9cb89a11..487a5473985 100644
--- a/drivers/atm/idt77105.c
+++ b/drivers/atm/idt77105.c
@@ -151,7 +151,7 @@ static int fetch_stats(struct atm_dev *dev,struct idt77105_stats __user *arg,int
 	spin_unlock_irqrestore(&idt77105_priv_lock, flags);
 	if (arg == NULL)
 		return 0;
-	return copy_to_user(arg, &PRIV(dev)->stats,
+	return copy_to_user(arg, &stats,
 		    sizeof(struct idt77105_stats)) ? -EFAULT : 0;
 }
 
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 949ed09c636..a126e614601 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -47,46 +47,40 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
 #define USB_REQ_DFU_DNLOAD	1
 #define BULK_SIZE		4096
 
-struct ath3k_data {
-	struct usb_device *udev;
-	u8 *fw_data;
-	u32 fw_size;
-	u32 fw_sent;
-};
-
-static int ath3k_load_firmware(struct ath3k_data *data,
-				unsigned char *firmware,
-				int count)
+static int ath3k_load_firmware(struct usb_device *udev,
+				const struct firmware *firmware)
 {
 	u8 *send_buf;
 	int err, pipe, len, size, sent = 0;
+	int count = firmware->size;
 
-	BT_DBG("ath3k %p udev %p", data, data->udev);
+	BT_DBG("udev %p", udev);
 
-	pipe = usb_sndctrlpipe(data->udev, 0);
+	pipe = usb_sndctrlpipe(udev, 0);
 
-	if ((usb_control_msg(data->udev, pipe,
+	send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+	if (!send_buf) {
+		BT_ERR("Can't allocate memory chunk for firmware");
+		return -ENOMEM;
+	}
+
+	memcpy(send_buf, firmware->data, 20);
+	if ((err = usb_control_msg(udev, pipe,
 				USB_REQ_DFU_DNLOAD,
 				USB_TYPE_VENDOR, 0, 0,
-				firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
+				send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
 		BT_ERR("Can't change to loading configuration err");
-		return -EBUSY;
+		goto error;
 	}
 	sent += 20;
 	count -= 20;
 
-	send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
-	if (!send_buf) {
-		BT_ERR("Can't allocate memory chunk for firmware");
-		return -ENOMEM;
-	}
-
 	while (count) {
 		size = min_t(uint, count, BULK_SIZE);
-		pipe = usb_sndbulkpipe(data->udev, 0x02);
-		memcpy(send_buf, firmware + sent, size);
+		pipe = usb_sndbulkpipe(udev, 0x02);
+		memcpy(send_buf, firmware->data + sent, size);
 
-		err = usb_bulk_msg(data->udev, pipe, send_buf, size,
+		err = usb_bulk_msg(udev, pipe, send_buf, size,
 					&len, 3000);
 
 		if (err || (len != size)) {
@@ -112,57 +106,28 @@ static int ath3k_probe(struct usb_interface *intf,
 {
 	const struct firmware *firmware;
 	struct usb_device *udev = interface_to_usbdev(intf);
-	struct ath3k_data *data;
-	int size;
 
 	BT_DBG("intf %p id %p", intf, id);
 
 	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->udev = udev;
-
 	if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
-		kfree(data);
 		return -EIO;
 	}
 
-	size = max_t(uint, firmware->size, 4096);
-	data->fw_data = kmalloc(size, GFP_KERNEL);
-	if (!data->fw_data) {
+	if (ath3k_load_firmware(udev, firmware)) {
 		release_firmware(firmware);
-		kfree(data);
-		return -ENOMEM;
-	}
-
-	memcpy(data->fw_data, firmware->data, firmware->size);
-	data->fw_size = firmware->size;
-	data->fw_sent = 0;
-	release_firmware(firmware);
-
-	usb_set_intfdata(intf, data);
-	if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) {
-		usb_set_intfdata(intf, NULL);
-		kfree(data->fw_data);
-		kfree(data);
 		return -EIO;
 	}
+	release_firmware(firmware);
 
 	return 0;
 }
 
 static void ath3k_disconnect(struct usb_interface *intf)
 {
-	struct ath3k_data *data = usb_get_intfdata(intf);
-
 	BT_DBG("ath3k_disconnect intf %p", intf);
-
-	kfree(data->fw_data);
-	kfree(data);
 }
 
 static struct usb_driver ath3k_driver = {
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index df99edf3464..0ba59d5aeb7 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7553,6 +7553,10 @@ bnx2_set_flags(struct net_device *dev, u32 data)
 	    !(data & ETH_FLAG_RXVLAN))
 		return -EINVAL;
 
+	/* TSO with VLAN tag won't work with current firmware */
+	if (!(data & ETH_FLAG_TXVLAN))
+		return -EINVAL;
+
 	rc = ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH | ETH_FLAG_RXVLAN |
 				  ETH_FLAG_TXVLAN);
 	if (rc)
@@ -7962,11 +7966,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 
 		/* AER (Advanced Error Reporting) hooks */
 		err = pci_enable_pcie_error_reporting(pdev);
-		if (err) {
-			dev_err(&pdev->dev, "pci_enable_pcie_error_reporting "
-					    "failed 0x%x\n", err);
-			/* non-fatal, continue */
-		}
+		if (!err)
+			bp->flags |= BNX2_FLAG_AER_ENABLED;
 
 	} else {
 		bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
@@ -8229,8 +8230,10 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	return 0;
 
 err_out_unmap:
-	if (bp->flags & BNX2_FLAG_PCIE)
+	if (bp->flags & BNX2_FLAG_AER_ENABLED) {
 		pci_disable_pcie_error_reporting(pdev);
+		bp->flags &= ~BNX2_FLAG_AER_ENABLED;
+	}
 
 	if (bp->regview) {
 		iounmap(bp->regview);
@@ -8418,8 +8421,10 @@ bnx2_remove_one(struct pci_dev *pdev)
 
 	kfree(bp->temp_stats_blk);
 
-	if (bp->flags & BNX2_FLAG_PCIE)
+	if (bp->flags & BNX2_FLAG_AER_ENABLED) {
 		pci_disable_pcie_error_reporting(pdev);
+		bp->flags &= ~BNX2_FLAG_AER_ENABLED;
+	}
 
 	free_netdev(dev);
 
@@ -8535,7 +8540,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev)
 	}
 	rtnl_unlock();
 
-	if (!(bp->flags & BNX2_FLAG_PCIE))
+	if (!(bp->flags & BNX2_FLAG_AER_ENABLED))
 		return result;
 
 	err = pci_cleanup_aer_uncorrect_error_status(pdev);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 5488a2e82fe..f459fb2f9ad 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6741,6 +6741,7 @@ struct bnx2 {
 #define BNX2_FLAG_JUMBO_BROKEN		0x00000800
 #define BNX2_FLAG_CAN_KEEP_VLAN		0x00001000
 #define BNX2_FLAG_BROKEN_STATS		0x00002000
+#define BNX2_FLAG_AER_ENABLED		0x00004000
 
 	struct bnx2_napi	bnx2_napi[BNX2_MAX_MSIX_VEC];
 
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 171782e2bb3..1024ae15822 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2470,6 +2470,10 @@ int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct pac
 	if (!(dev->flags & IFF_MASTER))
 		goto out;
 
+	skb = skb_share_check(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out;
+
 	if (!pskb_may_pull(skb, sizeof(struct lacpdu)))
 		goto out;
 
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index f4e638c6512..5c6fba802f2 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -326,6 +326,10 @@ static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct
 		goto out;
 	}
 
+	skb = skb_share_check(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out;
+
 	if (!pskb_may_pull(skb, arp_hdr_len(bond_dev)))
 		goto out;
 
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index b1025b85acf..163e0b06eaa 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2733,6 +2733,10 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
 	if (!slave || !slave_do_arp_validate(bond, slave))
 		goto out_unlock;
 
+	skb = skb_share_check(skb, GFP_ATOMIC);
+	if (!skb)
+		goto out_unlock;
+
 	if (!pskb_may_pull(skb, arp_hdr_len(dev)))
 		goto out_unlock;
 
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index d5a9db60ade..986195eaa57 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -117,6 +117,8 @@ source "drivers/net/can/sja1000/Kconfig"
 
 source "drivers/net/can/usb/Kconfig"
 
+source "drivers/net/can/softing/Kconfig"
+
 config CAN_DEBUG_DEVICES
 	bool "CAN devices debugging messages"
 	depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 07ca159ba3f..53c82a71778 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CAN_DEV)		+= can-dev.o
 can-dev-y			:= dev.o
 
 obj-y				+= usb/
+obj-y				+= softing/
 
 obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
 obj-$(CONFIG_CAN_MSCAN)		+= mscan/
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 7ef83d06f7e..2532b963153 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -2,7 +2,7 @@
  * at91_can.c - CAN network driver for AT91 SoC CAN controller
  *
  * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
- * (C) 2008, 2009, 2010 by Marc Kleine-Budde <kernel@pengutronix.de>
+ * (C) 2008, 2009, 2010, 2011 by Marc Kleine-Budde <kernel@pengutronix.de>
  *
  * This software may be distributed under the terms of the GNU General
  * Public License ("GPL") version 2 as distributed in the 'COPYING'
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/platform_device.h>
+#include <linux/rtnetlink.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
@@ -40,22 +41,23 @@
 
 #include <mach/board.h>
 
-#define AT91_NAPI_WEIGHT	12
+#define AT91_NAPI_WEIGHT	11
 
 /*
  * RX/TX Mailbox split
  * don't dare to touch
  */
-#define AT91_MB_RX_NUM		12
+#define AT91_MB_RX_NUM		11
 #define AT91_MB_TX_SHIFT	2
 
-#define AT91_MB_RX_FIRST	0
+#define AT91_MB_RX_FIRST	1
 #define AT91_MB_RX_LAST		(AT91_MB_RX_FIRST + AT91_MB_RX_NUM - 1)
 
 #define AT91_MB_RX_MASK(i)	((1 << (i)) - 1)
 #define AT91_MB_RX_SPLIT	8
 #define AT91_MB_RX_LOW_LAST	(AT91_MB_RX_SPLIT - 1)
-#define AT91_MB_RX_LOW_MASK	(AT91_MB_RX_MASK(AT91_MB_RX_SPLIT))
+#define AT91_MB_RX_LOW_MASK	(AT91_MB_RX_MASK(AT91_MB_RX_SPLIT) & \
+				 ~AT91_MB_RX_MASK(AT91_MB_RX_FIRST))
 
 #define AT91_MB_TX_NUM		(1 << AT91_MB_TX_SHIFT)
 #define AT91_MB_TX_FIRST	(AT91_MB_RX_LAST + 1)
@@ -168,6 +170,8 @@ struct at91_priv {
 
 	struct clk		*clk;
 	struct at91_can_data	*pdata;
+
+	canid_t			mb0_id;
 };
 
 static struct can_bittiming_const at91_bittiming_const = {
@@ -220,6 +224,18 @@ static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb,
 	set_mb_mode_prio(priv, mb, mode, 0);
 }