Merge branch 'master'

18 files changed, 116 insertions, 97 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bbd9c2323d8..5627ce1d2b3 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -356,7 +356,7 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int
 /*
  * PIIX4 ACPI: Two IO regions pointed to by longwords at
  *	0x40 (64 bytes of ACPI registers)
- *	0x90 (32 bytes of SMB registers)
+ *	0x90 (16 bytes of SMB registers)
  * and a few strange programmable PIIX4 device resources.
  */
 static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
@@ -366,7 +366,7 @@ static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
 	pci_read_config_dword(dev, 0x40, &region);
 	quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
 	pci_read_config_dword(dev, 0x90, &region);
-	quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+	quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
 
 	/* Device resource A has enables for some of the other ones */
 	pci_read_config_dword(dev, 0x5c, &res_a);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 25a47d7afa2..8420204c2ea 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -41,6 +41,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -682,10 +683,10 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
 			if (!ahci_host_intr(ap, qc))
 				if (ata_ratelimit()) {
 					struct pci_dev *pdev =
-					  to_pci_dev(ap->host_set->dev);
-					printk(KERN_WARNING
-					  "ahci(%s): unhandled interrupt on port %u\n",
-					  pci_name(pdev), i);
+						to_pci_dev(ap->host_set->dev);
+					dev_printk(KERN_WARNING, &pdev->dev,
+					  "unhandled interrupt on port %u\n",
+					  i);
 				}
 
 			VPRINTK("port %u\n", i);
@@ -693,10 +694,9 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
 			VPRINTK("port %u (no irq)\n", i);
 			if (ata_ratelimit()) {
 				struct pci_dev *pdev =
-				  to_pci_dev(ap->host_set->dev);
-				printk(KERN_WARNING
-				  "ahci(%s): interrupt on disabled port %u\n",
-				  pci_name(pdev), i);
+					to_pci_dev(ap->host_set->dev);
+				dev_printk(KERN_WARNING, &pdev->dev,
+					"interrupt on disabled port %u\n", i);
 			}
 		}
 
@@ -768,8 +768,8 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 
 	tmp = readl(mmio + HOST_CTL);
 	if (tmp & HOST_RESET) {
-		printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n",
-			pci_name(pdev), tmp);
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "controller reset failed (0x%x)\n", tmp);
 		return -EIO;
 	}
 
@@ -797,22 +797,22 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
 		if (rc) {
 			rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 			if (rc) {
-				printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n",
-					pci_name(pdev));
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
 				return rc;
 			}
 		}
 	} else {
 		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
-			printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
-				pci_name(pdev));
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit DMA enable failed\n");
 			return rc;
 		}
 		rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
-			printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
-				pci_name(pdev));
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "32-bit consistent DMA enable failed\n");
 			return rc;
 		}
 	}
@@ -915,10 +915,10 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
 	else
 		scc_s = "unknown";
 
-	printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x "
+	dev_printk(KERN_INFO, &pdev->dev,
+		"AHCI %02x%02x.%02x%02x "
 		"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
 	       	,
-	       	pci_name(pdev),
 
 	       	(vers >> 24) & 0xff,
 	       	(vers >> 16) & 0xff,
@@ -931,11 +931,11 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
 		impl,
 		scc_s);
 
-	printk(KERN_INFO DRV_NAME "(%s) flags: "
+	dev_printk(KERN_INFO, &pdev->dev,
+		"flags: "
 	       	"%s%s%s%s%s%s"
 	       	"%s%s%s%s%s%s%s\n"
 	       	,
-	       	pci_name(pdev),
 
 		cap & (1 << 31) ? "64bit " : "",
 		cap & (1 << 30) ? "ncq " : "",
@@ -968,7 +968,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	VPRINTK("ENTER\n");
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc)
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index be021478f41..7f8aa1b552c 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -45,6 +45,7 @@
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -621,18 +622,19 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	struct ata_port_info *port_info[2];
-	unsigned int combined = 0, n_ports = 1;
+	unsigned int combined = 0;
 	unsigned int pata_chan = 0, sata_chan = 0;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "version " DRV_VERSION "\n");
 
 	/* no hotplugging support (FIXME) */
 	if (!in_module_init)
 		return -ENODEV;
 
 	port_info[0] = &piix_port_info[ent->driver_data];
-	port_info[1] = NULL;
+	port_info[1] = &piix_port_info[ent->driver_data];
 
 	if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
 		u8 tmp;
@@ -670,12 +672,13 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		port_info[sata_chan] = &piix_port_info[ent->driver_data];
 		port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS;
 		port_info[pata_chan] = &piix_port_info[ich5_pata];
-		n_ports++;
 
-		printk(KERN_WARNING DRV_NAME ": combined mode detected\n");
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "combined mode detected (p=%u, s=%u)\n",
+			   pata_chan, sata_chan);
 	}
 
-	return ata_pci_init_one(pdev, port_info, n_ports);
+	return ata_pci_init_one(pdev, port_info, 2);
 }
 
 static int __init piix_init(void)
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 6cab14965cc..2e022240051 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4621,11 +4621,11 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
 	return probe_ent;
 }
 
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num)
 {
 	struct ata_probe_ent *probe_ent;
 
-	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+	probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
 	if (!probe_ent)
 		return NULL;
 
@@ -4772,9 +4772,9 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
 
 	if (legacy_mode) {
 		if (legacy_mode & (1 << 0))
-			probe_ent = ata_pci_init_legacy_port(pdev, port, 0);
+			probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
 		if (legacy_mode & (1 << 1))
-			probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1);
+			probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
 	} else {
 		if (n_ports == 2)
 			probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index 988d0d70a27..a50588c60fa 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -40,6 +40,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <asm/io.h>
@@ -626,16 +627,14 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 
 	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 	if (rc) {
-		printk(KERN_ERR DRV_NAME
-			"(%s): 32-bit DMA enable failed\n",
-			pci_name(pdev));
+		dev_printk(KERN_ERR, &pdev->dev,
+			"32-bit DMA enable failed\n");
 		return rc;
 	}
 	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 	if (rc) {
-		printk(KERN_ERR DRV_NAME
-			"(%s): 32-bit consistent DMA enable failed\n",
-			pci_name(pdev));
+		dev_printk(KERN_ERR, &pdev->dev,
+			"32-bit consistent DMA enable failed\n");
 		return rc;
 	}
 	return 0;
@@ -651,7 +650,7 @@ static int adma_ata_init_one(struct pci_dev *pdev,
 	int rc, port_no;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc)
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index a3ab14c79cd..64af334e71f 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -29,6 +29,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -1438,9 +1439,9 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
 	else
 		scc_s = "unknown";
 
-	printk(KERN_INFO DRV_NAME 
-	       "(%s) %u slots %u ports %s mode IRQ via %s\n",
-	       pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, 
+	dev_printk(KERN_INFO, &pdev->dev,
+	       "%u slots %u ports %s mode IRQ via %s\n",
+	       (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, 
 	       scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
 }
 
@@ -1461,9 +1462,8 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	void __iomem *mmio_base;
 	int pci_dev_busy = 0, rc;
 
-	if (!printed_version++) {
-		printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n");
-	}
+	if (!printed_version++)
+		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc) {
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 1a56d6c79dd..d573888eda7 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -61,6 +61,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -383,7 +384,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 			return -ENODEV;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 8f41702275d..b41c977d6fa 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -38,6 +38,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -633,7 +634,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	int rc;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	/*
 	 * If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 8c20229b01b..65502c157a5 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <asm/io.h>
@@ -602,25 +603,22 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 		if (rc) {
 			rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 			if (rc) {
-				printk(KERN_ERR DRV_NAME
-					"(%s): 64-bit DMA enable failed\n",
-					pci_name(pdev));
+				dev_printk(KERN_ERR, &pdev->dev,
+					   "64-bit DMA enable failed\n");
 				return rc;
 			}
 		}
 	} else {
 		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
-			printk(KERN_ERR DRV_NAME
-				"(%s): 32-bit DMA enable failed\n",
-				pci_name(pdev));
+			dev_printk(KERN_ERR, &pdev->dev,
+				"32-bit DMA enable failed\n");
 			return rc;
 		}
 		rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
-			printk(KERN_ERR DRV_NAME
-				"(%s): 32-bit consistent DMA enable failed\n",
-				pci_name(pdev));
+			dev_printk(KERN_ERR, &pdev->dev,
+				"32-bit consistent DMA enable failed\n");
 			return rc;
 		}
 	}
@@ -637,7 +635,7 @@ static int qs_ata_init_one(struct pci_dev *pdev,
 	int rc, port_no;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 3a056173fb9..435f7e0085e 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -41,6 +41,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -386,7 +387,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	u8 cls;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	/*
 	 * If this driver happens to only be useful on Apple's K2, then
@@ -463,8 +464,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 			writeb(cls, mmio_base + SIL_FIFO_W3);
 		}
 	} else
-		printk(KERN_WARNING DRV_NAME "(%s): cache line size not set.  Driver may not function\n",
-			pci_name(pdev));
+		dev_printk(KERN_WARNING, &pdev->dev,
+			 "cache line size not set.  Driver may not function\n");
 
 	if (ent->driver_data == sil_3114) {
 		irq_mask = SIL_MASK_4PORT;
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 05ce84286ae..211ec7eebc9 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -35,6 +35,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include <scsi/scsi_host.h>
 #include "scsi.h"
 #include <linux/libata.h>
@@ -695,7 +696,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int i, rc;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc)
@@ -755,14 +756,14 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 */
 	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 	if (rc) {
-		printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
-		       pci_name(pdev));
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "32-bit DMA enable failed\n");
 		goto out_free;
 	}
 	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 	if (rc) {
-		printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
-		       pci_name(pdev));
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "32-bit consistent DMA enable failed\n");
 		goto out_free;
 	}
 
@@ -798,9 +799,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 					break;
 			}
 			if (tmp & PORT_CS_PORT_RST)
-				printk(KERN_ERR DRV_NAME
-				       "(%s): failed to clear port RST\n",
-				       pci_name(pdev));
+				dev_printk(KERN_ERR, &pdev->dev,
+				           "failed to clear port RST\n");
 		}
 
 		/* Zero error counters. */
@@ -829,9 +829,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		/* Reset itself */
 		if (__sil24_reset_controller(port))
-			printk(KERN_ERR DRV_NAME
-			       "(%s): failed to reset controller\n",
-			       pci_name(pdev));
+			dev_printk(KERN_ERR, &pdev->dev,
+			           "failed to reset controller\n");
 	}
 
 	/* Turn on interrupts */
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 057f7b98b6c..42288be0e56 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -38,6 +38,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -237,6 +238,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 
 static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	static int printed_version;
 	struct ata_probe_ent *probe_ent = NULL;
 	int rc;
 	u32 genctl;
@@ -245,6 +247,9 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	u8 pmr;
 	u8 port2_start;
 
+	if (!printed_version++)
+		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
 	rc = pci_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -288,16 +293,18 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_read_config_byte(pdev, SIS_PMR, &pmr);
 	if (ent->device != 0x182) {
 		if ((pmr & SIS_PMR_COMBINED) == 0) {
-			printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Detected SiS 180/181 chipset in SATA mode\n");
 			port2_start = 64;
 		}
 		else {
-			printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Detected SiS 180/181 chipset in combined mode\n");
 			port2_start=0;
 		}
 	}
 	else {
-		printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n");
+		dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
 		port2_start = 0x20;
 	}
 
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 46208f52d0e..db615ff794d 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -44,6 +44,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -362,7 +363,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	int i;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	/*
 	 * If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 8e2e7b8308c..f859bbd681e 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -38,6 +38,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -1384,7 +1385,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
 	int rc;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	/*
 	 * If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index d68dc7d3422..a5e245c098e 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -32,6 +32,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -178,12 +179,16 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 
 static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	static int printed_version;
 	struct ata_probe_ent *probe_ent;
 	struct ata_port_info *ppi;
 	int rc;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
 	int pci_dev_busy = 0;
 
+	if (!printed_version++)
+		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
 	rc = pci_enable_device(pdev);
 	if (rc)
 		return rc;
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 80e291a909a..b3ecdbe400e 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -41,6 +41,7 @@
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -259,15 +260,15 @@ static void svia_configure(struct pci_dev *pdev)
 	u8 tmp8;
 
 	pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
-	printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
-	       pci_name(pdev),
+	dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
 	       (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
 
 	/* make sure SATA channels are enabled */
 	pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
 	if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-		printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
-		       pci_name(pdev), (int) tmp8);
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "enabling SATA channels (0x%x)\n",
+		           (int) tmp8);
 		tmp8 |= ALL_PORTS;
 		pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
 	}
@@ -275,8 +276,9 @@ static void svia_configure(struct pci_dev *pdev)
 	/* make sure interrupts for each channel sent to us */
 	pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
 	if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
-		printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
-		       pci_name(pdev), (int) tmp8);
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "enabling SATA channel interrupts (0x%x)\n",
+		           (int) tmp8);
 		tmp8 |= ALL_PORTS;
 		pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
 	}
@@ -284,8 +286,9 @@ static void svia_configure(struct pci_dev *pdev)
 	/* make sure native mode is enabled */
 	pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
 	if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
-		printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
-		       pci_name(pdev), (int) tmp8);
+		dev_printk(KERN_DEBUG, &pdev->dev,
+			   "enabling SATA channel native mode (0x%x)\n",
+		           (int) tmp8);
 		tmp8 |= NATIVE_MODE_ALL;
 		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 	}
@@ -303,7 +306,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	u8 tmp8;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc)
@@ -318,8 +321,9 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (board_id == vt6420) {
 		pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
 		if (tmp8 & SATA_2DEV) {
-			printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
-		       	pci_name(pdev), (int) tmp8);
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "SATA master/slave not supported (0x%x)\n",
+		       		   (int) tmp8);
 			rc = -EIO;
 			goto err_out_regions;
 		}
@@ -332,10 +336,11 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
 		if ((pci_resource_start(pdev, i) == 0) ||
 		    (pci_resource_len(pdev, i) < bar_sizes[i])) {
-			printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
-			       pci_name(pdev), i,
-			       pci_resource_start(pdev, i),
-			       pci_resource_len(pdev, i));
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
+				   i,
+			           pci_resource_start(pdev, i),
+			           pci_resource_len(pdev, i));
 			rc = -ENODEV;
 			goto err_out_regions;
 		}
@@ -353,8 +358,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		probe_ent = vt6421_init_probe_ent(pdev);
 
 	if (!probe_ent) {
-		printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
-		       pci_name(pdev));
+		dev_printk(KERN_ERR, &pdev->dev, "out of memory\n");
 		rc = -ENOMEM;
 		goto err_out_regions;
 	}
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 54273e0063c..bb84ba0c7e8 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -295,7 +296,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 	int rc;
 
 	if (!printed_version++)
-		printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
 	rc = pci_enable_device(pdev);
 	if (rc)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index f2781ca4276..fc0f12ba89c 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1274,14 +1274,12 @@ static int nfs_check_inode_attributes(struct inode *inode, struct nfs_fattr *fat
 	}
 
 	if ((fattr->valid & NFS_ATTR_FATTR) == 0) {
-		spin_unlock(&inode->i_lock);
 		return 0;
 	}
 
 	/* Has the inode gone and changed behind our back? */
 	if (nfsi->fileid != fattr->fileid
 			|| (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) {
-		spin_unlock(&inode->i_lock);
 		return -EIO;
 	}