Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for the i2c subsystem.

  Except for a few one-liners, there is mainly one revert because of an
  overlooked dependency.  Since there is no linux-next at the moment, I
  did some extra testing, and all was fine for me."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: mxs: Handle i2c DMA failure properly
  i2c: s3c2410: Fix code to free gpios
  i2c: omap: ensure writes to dev->buf_len are ordered
  Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints"
  i2c: at91: fix SMBus quick command

6 files changed, 48 insertions, 20 deletions

diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5683a84c6e..6013831a043 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,12 +26,14 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE		0x3f
@@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id)
 
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id)
 	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
 	pdata->flags = dev_attr->flags;
 
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 * Only omap3 has support for constraints
+	 */
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
 			NULL, 0, 0);
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index aa59a254be2..c02bf208084 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -39,6 +39,7 @@
 #define	AT91_TWI_STOP		0x0002	/* Send a Stop Condition */
 #define	AT91_TWI_MSEN		0x0004	/* Master Transfer Enable */
 #define	AT91_TWI_SVDIS		0x0020	/* Slave Transfer Disable */
+#define	AT91_TWI_QUICK		0x0040	/* SMBus quick command */
 #define	AT91_TWI_SWRST		0x0080	/* Software Reset */
 
 #define	AT91_TWI_MMR		0x0004	/* Master Mode Register */
@@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 
 	INIT_COMPLETION(dev->cmd_complete);
 	dev->transfer_status = 0;
-	if (dev->msg->flags & I2C_M_RD) {
+
+	if (!dev->buf_len) {
+		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+		at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+	} else if (dev->msg->flags & I2C_M_RD) {
 		unsigned start_flags = AT91_TWI_START;
 
 		if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 286ca191782..0670da79ee5 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -287,12 +287,14 @@ read_init_dma_fail:
 select_init_dma_fail:
 	dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
 select_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
 	return -EINVAL;
 
 /* Write failpath. */
 write_init_dma_fail:
 	dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
 write_init_pio_fail:
+	dmaengine_terminate_all(i2c->dmach);
 	return -EINVAL;
 }
 
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index db31eaed6ea..3525c9e62cb 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -43,7 +43,6 @@
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
 #include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_OMAP1_REV_2		0x20
@@ -187,8 +186,9 @@ struct omap_i2c_dev {
 	int			reg_shift;      /* bit shift for I2C register addresses */
 	struct completion	cmd_complete;
 	struct resource		*ioarea;
-	u32			latency;	/* maximum MPU wkup latency */
-	struct pm_qos_request	pm_qos_request;
+	u32			latency;	/* maximum mpu wkup latency */
+	void			(*set_mpu_wkup_lat)(struct device *dev,
+						    long latency);
 	u32			speed;		/* Speed of bus in kHz */
 	u32			dtrev;		/* extra revision from DT */
 	u32			flags;
@@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx)
 		dev->b_hw = 1; /* Enable hardware fixes */
 
 	/* calculate wakeup latency constraint for MPU */
-	dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->latency = (1000000 * dev->threshold) /
+			(1000 * dev->speed / 8);
 }
 
 /*
@@ -522,6 +524,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	dev->buf = msg->buf;
 	dev->buf_len = msg->len;
 
+	/* make sure writes to dev->buf_len are ordered */
+	barrier();
+
 	omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
 
 	/* Clear the FIFO Buffers */
@@ -579,7 +584,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	 */
 	timeout = wait_for_completion_timeout(&dev->cmd_complete,
 						OMAP_I2C_TIMEOUT);
-	dev->buf_len = 0;
 	if (timeout == 0) {
 		dev_err(dev->dev, "controller timed out\n");
 		omap_i2c_init(dev);
@@ -629,16 +633,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	if (r < 0)
 		goto out;
 
-	/*
-	 * When waiting for completion of a i2c transfer, we need to
-	 * set a wake up latency constraint for the MPU. This is to
-	 * ensure quick enough wakeup from idle, when transfer
-	 * completes.
-	 */
-	if (dev->latency)
-		pm_qos_add_request(&dev->pm_qos_request,
-				   PM_QOS_CPU_DMA_LATENCY,
-				   dev->latency);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, dev->latency);
 
 	for (i = 0; i < num; i++) {
 		r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
@@ -646,8 +642,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 			break;
 	}
 
-	if (dev->latency)
-		pm_qos_remove_request(&dev->pm_qos_request);
+	if (dev->set_mpu_wkup_lat != NULL)
+		dev->set_mpu_wkup_lat(dev->dev, -1);
 
 	if (r == 0)
 		r = num;
@@ -1104,6 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	} else if (pdata != NULL) {
 		dev->speed = pdata->clkrate;
 		dev->flags = pdata->flags;
+		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
 		dev->dtrev = pdata->rev;
 	}
 
@@ -1159,8 +1156,9 @@ omap_i2c_probe(struct platform_device *pdev)
 			dev->b_hw = 1; /* Enable hardware fixes */
 
 		/* calculate wakeup latency constraint for MPU */
-		dev->latency = (1000000 * dev->fifo_size) /
-			       (1000 * dev->speed / 8);
+		if (dev->set_mpu_wkup_lat != NULL)
+			dev->latency = (1000000 * dev->fifo_size) /
+				       (1000 * dev->speed / 8);
 	}
 
 	/* reset ASAP, clearing any IRQs */
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3e0335f1fc6..9d902725bac 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -806,6 +806,7 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 			dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
 			goto free_gpio;
 		}
+		i2c->gpios[idx] = gpio;
 
 		ret = gpio_request(gpio, "i2c-bus");
 		if (ret) {
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index df804ba73e0..92a0dc75bc7 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -34,6 +34,7 @@ struct omap_i2c_bus_platform_data {
 	u32		clkrate;
 	u32		rev;
 	u32		flags;
+	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
 };
 
 #endif