Merge branch 'acpi-dev-pm'

* acpi-dev-pm:
  ACPI / PM: Allow attach/detach routines to change device power states
  ACPI / PM: Introduce os_accessible flag for power_state
  ACPI / PM: Add check preventing transitioning to non-D0 state from D3.
  ACPI / PM: Fix build problem when CONFIG_ACPI or CONFIG_PM is not set
  ACPI / PM: Fix build problem related to acpi_target_system_state()
  ACPI / PM: Provide ACPI PM callback routines for subsystems
  ACPI / PM: Move device PM functions related to sleep states
  ACPI / PM: Provide device PM functions operating on struct acpi_device
  ACPI / PM: Split device wakeup management routines
  ACPI / PM: Move runtime remote wakeup setup routine to device_pm.c
  ACPI / PM: Move device power state selection routine to device_pm.c
  ACPI / PM: Move routines for adding/removing device wakeup notifiers
  ACPI / PM: Fix device PM kernedoc comments and #ifdefs

8 files changed, 813 insertions, 260 deletions

diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 82422fe90f8..a2711fae62d 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -21,9 +21,10 @@ obj-y				+= acpi.o \
 acpi-y				+= osl.o utils.o reboot.o
 acpi-y				+= nvs.o
 
-# sleep related files
+# Power management related files
 acpi-y				+= wakeup.o
 acpi-y				+= sleep.o
+acpi-$(CONFIG_PM)		+= device_pm.o
 acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 
 
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index d59175efc42..1f0d457ecbc 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -257,7 +257,15 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state)
 }
 
 
-static int __acpi_bus_set_power(struct acpi_device *device, int state)
+/**
+ * acpi_device_set_power - Set power state of an ACPI device.
+ * @device: Device to set the power state of.
+ * @state: New power state to set.
+ *
+ * Callers must ensure that the device is power manageable before using this
+ * function.
+ */
+int acpi_device_set_power(struct acpi_device *device, int state)
 {
 	int result = 0;
 	acpi_status status = AE_OK;
@@ -298,6 +306,12 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
 	 * a lower-powered state.
 	 */
 	if (state < device->power.state) {
+		if (device->power.state >= ACPI_STATE_D3_HOT &&
+		    state != ACPI_STATE_D0) {
+			printk(KERN_WARNING PREFIX
+			      "Cannot transition to non-D0 state from D3\n");
+			return -ENODEV;
+		}
 		if (device->power.flags.power_resources) {
 			result = acpi_power_transition(device, state);
 			if (result)
@@ -341,6 +355,7 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state)
 
 	return result;
 }
+EXPORT_SYMBOL(acpi_device_set_power);
 
 
 int acpi_bus_set_power(acpi_handle handle, int state)
@@ -359,7 +374,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
 		return -ENODEV;
 	}
 
-	return __acpi_bus_set_power(device, state);
+	return acpi_device_set_power(device, state);
 }
 EXPORT_SYMBOL(acpi_bus_set_power);
 
@@ -402,7 +417,7 @@ int acpi_bus_update_power(acpi_handle handle, int *state_p)
 	if (result)
 		return result;
 
-	result = __acpi_bus_set_power(device, state);
+	result = acpi_device_set_power(device, state);
 	if (!result && state_p)
 		*state_p = state;
 
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
new file mode 100644
index 00000000000..f09dc987cf1
--- /dev/null
+++ b/drivers/acpi/device_pm.c
@@ -0,0 +1,668 @@
+/*
+ * drivers/acpi/device_pm.c - ACPI device power management routines.
+ *
+ * Copyright (C) 2012, Intel Corp.
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pm_runtime.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+
+static DEFINE_MUTEX(acpi_pm_notifier_lock);
+
+/**
+ * acpi_add_pm_notifier - Register PM notifier for given ACPI device.
+ * @adev: ACPI device to add the notifier for.
+ * @context: Context information to pass to the notifier routine.
+ *
+ * NOTE: @adev need not be a run-wake or wakeup device to be a valid source of
+ * PM wakeup events.  For example, wakeup events may be generated for bridges
+ * if one of the devices below the bridge is signaling wakeup, even if the
+ * bridge itself doesn't have a wakeup GPE associated with it.
+ */
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+				 acpi_notify_handler handler, void *context)
+{
+	acpi_status status = AE_ALREADY_EXISTS;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_install_notify_handler(adev->handle,
+					     ACPI_SYSTEM_NOTIFY,
+					     handler, context);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = true;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
+/**
+ * acpi_remove_pm_notifier - Unregister PM notifier from given ACPI device.
+ * @adev: ACPI device to remove the notifier from.
+ */
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+				    acpi_notify_handler handler)
+{
+	acpi_status status = AE_BAD_PARAMETER;
+
+	mutex_lock(&acpi_pm_notifier_lock);
+
+	if (!adev->wakeup.flags.notifier_present)
+		goto out;
+
+	status = acpi_remove_notify_handler(adev->handle,
+					    ACPI_SYSTEM_NOTIFY,
+					    handler);
+	if (ACPI_FAILURE(status))
+		goto out;
+
+	adev->wakeup.flags.notifier_present = false;
+
+ out:
+	mutex_unlock(&acpi_pm_notifier_lock);
+	return status;
+}
+
+/**
+ * acpi_device_power_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @adev: ACPI device node corresponding to @dev.
+ * @target_state: System state to match the resultant device state.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * Find the lowest power (highest number) ACPI device power state that the
+ * device can be in while the system is in the state represented by
+ * @target_state.  If @d_min_p is set, the highest power (lowest number) device
+ * power state that @dev can be in for the given system sleep state is stored
+ * at the location pointed to by it.
+ *
+ * Callers must ensure that @dev and @adev are valid pointers and that @adev
+ * actually corresponds to @dev before using this function.
+ */
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+			    u32 target_state, int d_max_in, int *d_min_p)
+{
+	char acpi_method[] = "_SxD";
+	unsigned long long d_min, d_max;
+	bool wakeup = false;
+
+	if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
+		return -EINVAL;
+
+	if (d_max_in > ACPI_STATE_D3_HOT) {
+		enum pm_qos_flags_status stat;
+
+		stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
+		if (stat == PM_QOS_FLAGS_ALL)
+			d_max_in = ACPI_STATE_D3_HOT;
+	}
+
+	acpi_method[2] = '0' + target_state;
+	/*
+	 * If the sleep state is S0, the lowest limit from ACPI is D3,
+	 * but if the device has _S0W, we will use the value from _S0W
+	 * as the lowest limit from ACPI.  Finally, we will constrain
+	 * the lowest limit with the specified one.
+	 */
+	d_min = ACPI_STATE_D0;
+	d_max = ACPI_STATE_D3;
+
+	/*
+	 * If present, _SxD methods return the minimum D-state (highest power
+	 * state) we can use for the corresponding S-states.  Otherwise, the
+	 * minimum D-state is D0 (ACPI 3.x).
+	 *
+	 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+	 * provided -- that's our fault recovery, we ignore retval.
+	 */
+	if (target_state > ACPI_STATE_S0) {
+		acpi_evaluate_integer(adev->handle, acpi_method, NULL, &d_min);
+		wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
+			&& adev->wakeup.sleep_state >= target_state;
+	} else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
+			PM_QOS_FLAGS_NONE) {
+		wakeup = adev->wakeup.flags.valid;
+	}
+
+	/*
+	 * If _PRW says we can wake up the system from the target sleep state,
+	 * the D-state returned by _SxD is sufficient for that (we assume a
+	 * wakeup-aware driver if wake is set).  Still, if _SxW exists
+	 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+	 * can wake the system.  _S0W may be valid, too.
+	 */
+	if (wakeup) {
+		acpi_status status;
+
+		acpi_method[3] = 'W';
+		status = acpi_evaluate_integer(adev->handle, acpi_method, NULL,
+						&d_max);
+		if (ACPI_FAILURE(status)) {
+			if (target_state != ACPI_STATE_S0 ||
+			    status != AE_NOT_FOUND)
+				d_max = d_min;
+		} else if (d_max < d_min) {
+			/* Warn the user of the broken DSDT */
+			printk(KERN_WARNING "ACPI: Wrong value from %s\n",
+				acpi_method);
+			/* Sanitize it */
+			d_min = d_max;
+		}
+	}
+
+	if (d_max_in < d_min)
+		return -EINVAL;
+	if (d_min_p)
+		*d_min_p = d_min;
+	/* constrain d_max with specified lowest limit (max number) */
+	if (d_max > d_max_in) {
+		for (d_max = d_max_in; d_max > d_min; d_max--) {
+			if (adev->power.states[d_max].flags.valid)
+				break;
+		}
+	}
+	return d_max;
+}
+EXPORT_SYMBOL_GPL(acpi_device_power_state);
+
+/**
+ * acpi_pm_device_sleep_state - Get preferred power state of ACPI device.
+ * @dev: Device whose preferred target power state to return.
+ * @d_min_p: Location to store the upper limit of the allowed states range.
+ * @d_max_in: Deepest low-power state to take into consideration.
+ * Return value: Preferred power state of the device on success, -ENODEV
+ * (if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ */
+int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	return acpi_device_power_state(dev, adev, acpi_target_system_state(),
+				       d_max_in, d_min_p);
+}
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_wakeup_device - Wakeup notification handler for ACPI devices.
+ * @handle: ACPI handle of the device the notification is for.
+ * @event: Type of the signaled event.
+ * @context: Device corresponding to @handle.
+ */
+static void acpi_wakeup_device(acpi_handle handle, u32 event, void *context)
+{
+	struct device *dev = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && dev) {
+		pm_wakeup_event(dev, 0);
+		pm_runtime_resume(dev);
+	}
+}
+
+/**
+ * __acpi_device_run_wake - Enable/disable runtime remote wakeup for device.
+ * @adev: ACPI device to enable/disable the remote wakeup for.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ *
+ * Enable/disable the GPE associated with @adev so that it can generate
+ * wakeup signals for the device in response to external (remote) events and
+ * enable/disable device wakeup power.
+ *
+ * Callers must ensure that @adev is a valid ACPI device node before executing
+ * this function.
+ */
+int __acpi_device_run_wake(struct acpi_device *adev, bool enable)
+{
+	struct acpi_device_wakeup *wakeup = &adev->wakeup;
+
+	if (enable) {
+		acpi_status res;
+		int error;
+
+		error = acpi_enable_wakeup_device_power(adev, ACPI_STATE_S0);
+		if (error)
+			return error;
+
+		res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+		if (ACPI_FAILURE(res)) {
+			acpi_disable_wakeup_device_power(adev);
+			return -EIO;
+		}
+	} else {
+		acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+		acpi_disable_wakeup_device_power(adev);
+	}
+	return 0;
+}
+
+/**
+ * acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
+ * @dev: Device to enable/disable the platform to wake up.
+ * @enable: Whether to enable or disable the wakeup functionality.
+ */
+int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
+{
+	struct acpi_device *adev;
+	acpi_handle handle;
+
+	if (!device_run_wake(phys_dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(phys_dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(phys_dev, "ACPI handle without context in %s!\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	return __acpi_device_run_wake(adev, enable);
+}
+EXPORT_SYMBOL(acpi_pm_device_run_wake);
+#else
+static inline void acpi_wakeup_device(acpi_handle handle, u32 event,
+				      void *context) {}
+#endif /* CONFIG_PM_RUNTIME */
+
+ #ifdef CONFIG_PM_SLEEP
+/**
+ * __acpi_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system.
+ * @target_state: System state the device is supposed to wake up from.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int __acpi_device_sleep_wake(struct acpi_device *adev, u32 target_state,
+			     bool enable)
+{
+	return enable ?
+		acpi_enable_wakeup_device_power(adev, target_state) :
+		acpi_disable_wakeup_device_power(adev);
+}
+
+/**
+ * acpi_pm_device_sleep_wake - Enable or disable device to wake up the system.
+ * @dev: Device to enable/desible to wake up the system from sleep states.
+ * @enable: Whether to enable or disable @dev to wake up the system.
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+	acpi_handle handle;
+	struct acpi_device *adev;
+	int error;
+
+	if (!device_can_wakeup(dev))
+		return -EINVAL;
+
+	handle = DEVICE_ACPI_HANDLE(dev);
+	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+		dev_dbg(dev, "ACPI handle without context in %s!\n", __func__);
+		return -ENODEV;
+	}
+
+	error = __acpi_device_sleep_wake(adev, acpi_target_system_state(),
+					 enable);
+	if (!error)
+		dev_info(dev, "System wakeup %s by ACPI\n",
+				enable ? "enabled" : "disabled");
+
+	return error;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * acpi_dev_pm_get_node - Get ACPI device node for the given physical device.
+ * @dev: Device to get the ACPI node for.
+ */
+static struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+{
+	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	return handle && ACPI_SUCCESS(acpi_bus_get_device(handle, &adev)) ?
+		adev : NULL;
+}
+
+/**
+ * acpi_dev_pm_low_power - Put ACPI device into a low-power state.
+ * @dev: Device to put into a low-power state.
+ * @adev: ACPI device node corresponding to @dev.
+ * @system_state: System state to choose the device state for.
+ */
+static int acpi_dev_pm_low_power(struct device *dev, struct acpi_device *adev,
+				 u32 system_state)
+{
+	int power_state;
+
+	if (!acpi_device_power_manageable(adev))
+		return 0;
+
+	power_state = acpi_device_power_state(dev, adev, system_state,
+					      ACPI_STATE_D3, NULL);
+	if (power_state < ACPI_STATE_D0 || power_state > ACPI_STATE_D3)
+		return -EIO;
+
+	return acpi_device_set_power(adev, power_state);
+}
+
+/**
+ * acpi_dev_pm_full_power - Put ACPI device into the full-power state.
+ * @adev: ACPI device node to put into the full-power state.
+ */
+static int acpi_dev_pm_full_power(struct acpi_device *adev)
+{
+	return acpi_device_power_manageable(adev) ?
+		acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+/**
+ * acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a runtime low-power state using the standard ACPI
+ * mechanism.  Set up remote wakeup if desired, choose the state to put the
+ * device into (this checks if remote wakeup is expected to work too), and set
+ * the power state of the device.
+ */
+int acpi_dev_runtime_suspend(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	bool remote_wakeup;
+	int error;
+
+	if (!adev)
+		return 0;
+
+	remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
+				PM_QOS_FLAGS_NONE;
+	error = __acpi_device_run_wake(adev, remote_wakeup);
+	if (remote_wakeup && error)
+		return -EAGAIN;
+
+	error = acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+	if (error)
+		__acpi_device_run_wake(adev, false);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_suspend);
+
+/**
+ * acpi_dev_runtime_resume - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism at run time.  Set the power state of the device to ACPI D0 and
+ * disable remote wakeup.
+ */
+int acpi_dev_runtime_resume(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	int error;
+
+	if (!adev)
+		return 0;
+
+	error = acpi_dev_pm_full_power(adev);
+	__acpi_device_run_wake(adev, false);
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_runtime_resume);
+
+/**
+ * acpi_subsys_runtime_suspend - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic runtime suspend procedure for @dev and use ACPI to put
+ * it into a runtime low-power state.
+ */
+int acpi_subsys_runtime_suspend(struct device *dev)
+{
+	int ret = pm_generic_runtime_suspend(dev);
+	return ret ? ret : acpi_dev_runtime_suspend(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_suspend);
+
+/**
+ * acpi_subsys_runtime_resume - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic runtime resume procedure for it.
+ */
+int acpi_subsys_runtime_resume(struct device *dev)
+{
+	int ret = acpi_dev_runtime_resume(dev);
+	return ret ? ret : pm_generic_runtime_resume(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * acpi_dev_suspend_late - Put device into a low-power state using ACPI.
+ * @dev: Device to put into a low-power state.
+ *
+ * Put the given device into a low-power state during system transition to a
+ * sleep state using the standard ACPI mechanism.  Set up system wakeup if
+ * desired, choose the state to put the device into (this checks if system
+ * wakeup is expected to work too), and set the power state of the device.
+ */
+int acpi_dev_suspend_late(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	u32 target_state;
+	bool wakeup;
+	int error;
+
+	if (!adev)
+		return 0;
+
+	target_state = acpi_target_system_state();
+	wakeup = device_may_wakeup(dev);
+	error = __acpi_device_sleep_wake(adev, target_state, wakeup);
+	if (wakeup && error)
+		return error;
+
+	error = acpi_dev_pm_low_power(dev, adev, target_state);
+	if (error)
+		__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_suspend_late);
+
+/**
+ * acpi_dev_resume_early - Put device into the full-power state using ACPI.
+ * @dev: Device to put into the full-power state.
+ *
+ * Put the given device into the full-power state using the standard ACPI
+ * mechanism during system transition to the working state.  Set the power
+ * state of the device to ACPI D0 and disable remote wakeup.
+ */
+int acpi_dev_resume_early(struct device *dev)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+	int error;
+
+	if (!adev)
+		return 0;
+
+	error = acpi_dev_pm_full_power(adev);
+	__acpi_device_sleep_wake(adev, ACPI_STATE_UNKNOWN, false);
+	return error;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_resume_early);
+
+/**
+ * acpi_subsys_prepare - Prepare device for system transition to a sleep state.
+ * @dev: Device to prepare.
+ */
+int acpi_subsys_prepare(struct device *dev)
+{
+	/*
+	 * Follow PCI and resume devices suspended at run time before running
+	 * their system suspend callbacks.
+	 */
+	pm_runtime_resume(dev);
+	return pm_generic_prepare(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_prepare);
+
+/**
+ * acpi_subsys_suspend_late - Suspend device using ACPI.
+ * @dev: Device to suspend.
+ *
+ * Carry out the generic late suspend procedure for @dev and use ACPI to put
+ * it into a low-power state during system transition into a sleep state.
+ */
+int acpi_subsys_suspend_late(struct device *dev)
+{
+	int ret = pm_generic_suspend_late(dev);
+	return ret ? ret : acpi_dev_suspend_late(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_suspend_late);
+
+/**
+ * acpi_subsys_resume_early - Resume device using ACPI.
+ * @dev: Device to Resume.
+ *
+ * Use ACPI to put the given device into the full-power state and carry out the
+ * generic early resume procedure for it during system transition into the
+ * working state.
+ */
+int acpi_subsys_resume_early(struct device *dev)
+{
+	int ret = acpi_dev_resume_early(dev);
+	return ret ? ret : pm_generic_resume_early(dev);
+}
+EXPORT_SYMBOL_GPL(acpi_subsys_resume_early);
+#endif /* CONFIG_PM_SLEEP */
+
+static struct dev_pm_domain acpi_general_pm_domain = {
+	.ops = {
+#ifdef CONFIG_PM_RUNTIME
+		.runtime_suspend = acpi_subsys_runtime_suspend,
+		.runtime_resume = acpi_subsys_runtime_resume,
+		.runtime_idle = pm_generic_runtime_idle,
+#endif
+#ifdef CONFIG_PM_SLEEP
+		.prepare = acpi_subsys_prepare,
+		.suspend_late = acpi_subsys_suspend_late,
+		.resume_early = acpi_subsys_resume_early,
+		.poweroff_late = acpi_subsys_suspend_late,
+		.restore_early = acpi_subsys_resume_early,
+#endif
+	},
+};
+
+/**
+ * acpi_dev_pm_attach - Prepare device for ACPI power management.
+ * @dev: Device to prepare.
+ * @power_on: Whether or not to power on the device.
+ *
+ * If @dev has a valid ACPI handle that has a valid struct acpi_device object
+ * attached to it, install a wakeup notification handler for the device and
+ * add it to the general ACPI PM domain.  If @power_on is set, the device will
+ * be put into the ACPI D0 state before the function returns.
+ *
+ * This assumes that the @dev's bus type uses generic power management callbacks
+ * (or doesn't use any power management callbacks at all).
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+	if (!adev)
+		return -ENODEV;
+
+	if (dev->pm_domain)
+		return -EEXIST;
+
+	acpi_add_pm_notifier(adev, acpi_wakeup_device, dev);
+	dev->pm_domain = &acpi_general_pm_domain;
+	if (power_on) {
+		acpi_dev_pm_full_power(adev);
+		__acpi_device_run_wake(adev, false);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
+
+/**
+ * acpi_dev_pm_detach - Remove ACPI power management from the device.
+ * @dev: Device to take care of.
+ * @power_off: Whether or not to try to remove power from the device.
+ *
+ * Remove the device from the general ACPI PM domain and remove its wakeup
+ * notifier.  If @power_off is set, additionally remove power from the device if
+ * possible.
+ *
+ * Callers must ensure proper synchronization of this function with power
+ * management callbacks.
+ */
+void acpi_dev_pm_detach(struct device *dev, bool power_off)
+{
+	struct acpi_device *adev = acpi_dev_pm_get_node(dev);
+
+	if (adev && dev->pm_domain == &acpi_general_pm_domain) {
+		dev->pm_domain = NULL;
+		acpi_remove_pm_notifier(adev, acpi_wakeup_device);
+		if (power_off) {
+			/*
+			 * If the device's PM QoS resume latency limit or flags
+			 * have been exposed to user space, they have to be
+			 * hidden at this point, so that they don't affect the
+			 * choice of the low-power state to put the device into.
+			 */
+			dev_pm_qos_hide_latency_limit(dev);
+			dev_pm_qos_hide_flags(dev);
+			__acpi_device_run_wake(adev, false);
+			acpi_dev_pm_low_power(dev, adev, ACPI_STATE_S0);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_dev_pm_detach);
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 1fcb8678665..da1416af0c8 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -965,8 +965,10 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
 		 * D3hot is only valid if _PR3 present.
 		 */
 		if (ps->resources.count ||
-		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
+		    (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT)) {
 			ps->flags.valid = 1;
+			ps->flags.os_accessible = 1;
+		}
 
 		ps->power = -1;	/* Unknown - driver assigned */
 		ps->latency = -1;	/* Unknown - driver assigned */
@@ -982,6 +984,11 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
 	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)
 		device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1;
 
+	/* Presence of _PS3 or _PRx means we can put the device into D3 cold */
+	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set ||
+			device->power.flags.power_resources)
+		device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1;
+
 	acpi_bus_init_power(device);
 
 	return 0;
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 69134653909..13a285dffac 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -18,8 +18,6 @@
 #include <linux/reboot.h>
 #include <linux/acpi.h>
 #include <linux/module.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
 
 #include <asm/io.h>
 
@@ -82,6 +80,12 @@ static int acpi_sleep_prepare(u32 acpi_state)
 
 #ifdef CONFIG_ACPI_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+u32 acpi_target_system_state(void)
+{
+	return acpi_target_sleep_state;
+}
+
 static bool pwr_btn_event_pending;
 
 /*
@@ -682,189 +686,6 @@ int acpi_suspend(u32 acpi_state)
 	return -EINVAL;
 }
 
-#ifdef CONFIG_PM
-/**
- *	acpi_pm_device_sleep_state - return preferred power state of ACPI device
- *		in the system sleep state given by %acpi_target_sleep_state
- *	@dev: device to examine; its driver model wakeup flags control
- *		whether it should be able to wake up the system
- *	@d_min_p: used to store the upper limit of allowed states range
- *	@d_max_in: specify the lowest allowed states
- *	Return value: preferred power state of the device on success, -ENODEV
- *	(ie. if there's no 'struct acpi_device' for @dev) or -EINVAL on failure
- *
- *	Find the lowest power (highest number) ACPI device power state that
- *	device @dev can be in while the system is in the sleep state represented
- *	by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
- *	able to wake up the system from this sleep state.  If @d_min_p is set,
- *	the highest power (lowest number) device power state of @dev allowed
- *	in this system sleep state is stored at the location pointed to by it.
- *
- *	The caller must ensure that @dev is valid before using this function.
- *	The caller is also responsible for figuring out if the device is
- *	supposed to be able to wake up the system and passing this information
- *	via @wake.
- */
-
-int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
-{
-	acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
-	struct acpi_device *adev;
-	char acpi_method[] = "_SxD";
-	unsigned long long d_min, d_max;
-	bool wakeup = false;
-
-	if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3)
-		return -EINVAL;
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		printk(KERN_DEBUG "ACPI handle has no context!\n");
-		return -ENODEV;
-	}
-	if (d_max_in > ACPI_STATE_D3_HOT) {
-		enum pm_qos_flags_status stat;
-
-		stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF);
-		if (stat == PM_QOS_FLAGS_ALL)
-			d_max_in = ACPI_STATE_D3_HOT;
-	}
-
-	acpi_method[2] = '0' + acpi_target_sleep_state;
-	/*
-	 * If the sleep state is S0, the lowest limit from ACPI is D3,
-	 * but if the device has _S0W, we will use the value from _S0W
-	 * as the lowest limit from ACPI.  Finally, we will constrain
-	 * the lowest limit with the specified one.
-	 */
-	d_min = ACPI_STATE_D0;
-	d_max = ACPI_STATE_D3;
-
-	/*
-	 * If present, _SxD methods return the minimum D-state (highest power
-	 * state) we can use for the corresponding S-states.  Otherwise, the
-	 * minimum D-state is D0 (ACPI 3.x).
-	 *
-	 * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
-	 * provided -- that's our fault recovery, we ignore retval.
-	 */
-	if (acpi_target_sleep_state > ACPI_STATE_S0) {
-		acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
-		wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
-			&& adev->wakeup.sleep_state >= acpi_target_sleep_state;
-	} else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
-			PM_QOS_FLAGS_NONE) {
-		wakeup = adev->wakeup.flags.valid;
-	}
-
-	/*
-	 * If _PRW says we can wake up the system from the target sleep state,
-	 * the D-state returned by _SxD is sufficient for that (we assume a
-	 * wakeup-aware driver if wake is set).  Still, if _SxW exists
-	 * (ACPI 3.x), it should return the maximum (lowest power) D-state that
-	 * can wake the system.  _S0W may be valid, too.
-	 */
-	if (wakeup) {
-		acpi_status status;
-
-		acpi_method[3] = 'W';
-		status = acpi_evaluate_integer(handle, acpi_method, NULL,
-						&d_max);
-		if (ACPI_FAILURE(status)) {
-			if (acpi_target_sleep_state != ACPI_STATE_S0 ||
-			    status != AE_NOT_FOUND)
-				d_max = d_min;
-		} else if (d_max < d_min) {
-			/* Warn the user of the broken DSDT */
-			printk(KERN_WARNING "ACPI: Wrong value from %s\n",
-				acpi_method);
-			/* Sanitize it */
-			d_min = d_max;
-		}
-	}
-
-	if (d_max_in < d_min)
-		return -EINVAL;
-	if (d_min_p)
-		*d_min_p = d_min;
-	/* constrain d_max with specified lowest limit (max number) */
-	if (d_max > d_max_in) {
-		for (d_max = d_max_in; d_max > d_min; d_max--) {
-			if (adev->power.states[d_max].flags.valid)
-				break;
-		}
-	}
-	return d_max;
-}
-EXPORT_SYMBOL(acpi_pm_device_sleep_state);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * acpi_pm_device_run_wake - Enable/disable wake-up for given device.
- * @phys_dev: Device to enable/disable the platform to wake-up the system for.
- * @enable: Whether enable or disable the wake-up functionality.
- *
- * Find the ACPI device object corresponding to @pci_dev and try to
- * enable/disable the GPE associated with it.
- */
-int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
-{
-	struct acpi_device *dev;
-	acpi_handle handle;
-
-	if (!device_run_wake(phys_dev))
-		return -EINVAL;
-
-	handle = DEVICE_ACPI_HANDLE(phys_dev);
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &dev))) {
-		dev_dbg(phys_dev, "ACPI handle has no context in %s!\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	if (enable) {
-		acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
-		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
-	} else {
-		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number);
-		acpi_disable_wakeup_device_power(dev);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(acpi_pm_device_run_wake);
-
-/**
- *	acpi_pm_device_sleep_wake - enable or disable the system wake-up
- *                                  capability of given device
- *	@dev: device to handle
- *	@enable: 'true' - enable, 'false' - disable the wake-up capability
- */
-int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
-{
-	acpi_handle handle;
-	struct acpi_device *adev;
-	int error;
-
-	if (!device_can_wakeup(dev))
-		return -EINVAL;
-
-	handle = DEVICE_ACPI_HANDLE(dev);
-	if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
-		dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
-		return -ENODEV;
-	}
-
-	error = enable ?
-		acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
-		acpi_disable_wakeup_device_power(adev);
-	if (!error)
-		dev_info(dev, "wake-up capability %s by ACPI\n",
-				enable ? "enabled" : "disabled");
-
-	return error;
-}
-#endif  /* CONFIG_PM_SLEEP */
-
 static void acpi_power_off_prepare(void)
 {
 	/* Prepare to power off the system */
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 63d6618a480..1af4008182f 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -20,8 +20,6 @@
 #include <linux/pm_qos.h>
 #include "pci.h"
 
-static DEFINE_MUTEX(pci_acpi_pm_notify_mtx);
-
 /**
  * pci_acpi_wake_bus - Wake-up notification handler for root buses.
  * @handle: ACPI handle of a device the notification is for.
@@ -69,67 +67,6 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
 }
 
 /**
- * add_pm_notifier - Register PM notifier for given ACPI device.
- * @dev: ACPI device to add the notifier for.
- * @context: PCI device or bus to check for PME status if an event is signaled.
- *
- * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of
- * PM wake-up events.  For example, wake-up events may be generated for bridges
- * if one of the devices below the bridge is signaling PME, even if the bridge
- * itself doesn't have a wake-up GPE associated with it.
- */
-static acpi_status add_pm_notifier(struct acpi_device *dev,
-				   acpi_notify_handler handler,
-				   void *context)
-{
-	acpi_status status = AE_ALREADY_EXISTS;
-
-	mutex_lock(&pci_acpi_pm_notify_mtx);
-
-	if (dev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_install_notify_handler(dev->handle,
-					     ACPI_SYSTEM_NOTIFY,
-					     handler, context);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	dev->wakeup.flags.notifier_present = true;
-
- out:
-	mutex_unlock(&pci_acpi_pm_notify_mtx);
-	return status;
-}
-
-/**
- * remove_pm_notifier - Unregister PM notifier from given ACPI device.
- * @dev: ACPI device to remove the notifier from.
- */
-static acpi_status remove_pm_notifier(struct acpi_device *dev,
-				      acpi_notify_handler handler)
-{
-	acpi_status status = AE_BAD_PARAMETER;
-
-	mutex_lock(&pci_acpi_pm_notify_mtx);
-
-	if (!dev->wakeup.flags.notifier_present)
-		goto out;
-
-	status = acpi_remove_notify_handler(dev->handle,
-					    ACPI_SYSTEM_NOTIFY,
-					    handler);
-	if (ACPI_FAILURE(status))
-		goto out;
-
-	dev->wakeup.flags.notifier_present = false;
-
- out:
-	mutex_unlock(&pci_acpi_pm_notify_mtx);
-	return status;
-}
-
-/**
  * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus.
  * @dev: ACPI device to add the notifier for.
  * @pci_bus: PCI bus to walk checking for PME status if an event is signaled.
@@ -137,7 +74,7 @@ static acpi_status remove_pm_notifier(struct acpi_device *dev,
 acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
 					 struct pci_bus *pci_bus)
 {
-	return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
+	return acpi_add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus);
 }
 
 /**
@@ -146,7 +83,7 @@ acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
  */
 acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
 {
-	return remove_pm_notifier(dev, pci_acpi_wake_bus);
+	return acpi_remove_pm_notifier(dev, pci_acpi_wake_bus);
 }
 
 /**
@@ -157,7 +94,7 @@ acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev)
 acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
 				     struct pci_dev *pci_dev)
 {
-	return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
+	return acpi_add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev);
 }
 
 /**
@@ -166,7 +103,7 @@ acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
  */
 acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
 {
-	return remove_pm_notifier(dev, pci_acpi_wake_dev);
+	return acpi_remove_pm_notifier(dev, pci_acpi_wake_dev);
 }
 
 phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 0daa0fbd865..c3bc4511e0c 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -201,6 +201,7 @@ struct acpi_device_power_flags {
 struct acpi_device_power_state {
 	struct {
 		u8 valid:1;
+		u8 os_accessible:1;
 		u8 explicit_set:1;	/* _PSx present? */
 		u8 reserved:6;
 	} flags;
@@ -339,6 +340,7 @@ acpi_status acpi_bus_get_status_handle(acpi_handle handle,
 				       unsigned long long *sta);
 int acpi_bus_get_status(struct acpi_device *device);
 int acpi_bus_set_power(acpi_handle handle, int state);
+int acpi_device_set_power(struct acpi_device *device, int state);
 int acpi_bus_update_power(acpi_handle handle, int *state_p);
 bool acpi_bus_power_manageable(acpi_handle handle);
 bool acpi_bus_can_wakeup(acpi_handle handle);
@@ -416,30 +418,94 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int state);
 int acpi_disable_wakeup_device_power(struct acpi_device *dev);
 
 #ifdef CONFIG_PM
+acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+				 acpi_notify_handler handler, void *context);
+acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+				    acpi_notify_handler handler);
+int acpi_device_power_state(struct device *dev, struct acpi_device *adev,
+			    u32 target_state, int d_max_in, int *d_min_p);
 int acpi_pm_device_sleep_state(struct device *, int *, int);
 #else
-static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
+					       acpi_notify_handler handler,
+					       void *context)
+{
+	return AE_SUPPORT;
+}
+static inline acpi_status acpi_remove_pm_notifier(struct acpi_device *adev,
+						  acpi_notify_handler handler)
+{
+	return AE_SUPPORT;
+}
+static inline int __acpi_device_power_state(int m, int *p)
 {
 	if (p)
 		*p = ACPI_STATE_D0;
 	return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
 }
+static inline int acpi_device_power_state(struct device *dev,
+					  struct acpi_device *adev,
+					  u32 target_state, int d_max_in,
+					  int *d_min_p)
+{
+	return __acpi_device_power_state(d_max_in, d_min_p);
+}
+static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
+{
+	return __acpi_device_power_state(m, p);
+}
 #endif
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_RUNTIME
+int __acpi_device_run_wake(struct acpi_device *, bool);
 int acpi_pm_device_run_wake(struct device *, bool);
-int acpi_pm_device_sleep_wake(struct device *, bool);
 #else
+static inline int __acpi_device_run_wake(struct acpi_device *adev, bool en)
+{
+	return -ENODEV;
+}
 static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
 {
 	return -ENODEV;
 }
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+int __acpi_device_sleep_wake(struct acpi_device *, u32, bool);
+int acpi_pm_device_sleep_wake(struct device *, bool);
+#else
+static inline int __acpi_device_sleep_wake(struct acpi_device *adev,
+					   u32 target_state, bool enable)
+{
+	return -ENODEV;
+}
 static inline int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
 {
 	return -ENODEV;
 }
 #endif
 
+#ifdef CONFIG_ACPI_SLEEP
+u32 acpi_target_system_state(void);
+#else
+static inline u32 acpi_target_system_state(void) { return ACPI_STATE_S0; }
+#endif
+
+static inline bool acpi_device_power_manageable(struct acpi_device *adev)
+{
+	return adev->flags.power_manageable;
+}
+
+static inline bool acpi_device_can_wakeup(struct acpi_device *adev)
+{
+	return adev->wakeup.flags.valid;
+}
+
+static inline bool acpi_device_can_poweroff(struct acpi_device *adev)
+{
+	return adev->power.states[ACPI_STATE_D3_COLD].flags.os_accessible;
+}
+
 #else	/* CONFIG_ACPI */
 
 static inline int register_acpi_bus_type(void *bus) { return 0; }
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 90be9898110..28ba643c92c 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -25,6 +25,7 @@
 #ifndef _LINUX_ACPI_H
 #define _LINUX_ACPI_H
 
+#include <linux/errno.h>
 #include <linux/ioport.h>	/* for struct resource */
 
 #ifdef	CONFIG_ACPI
@@ -430,4 +431,41 @@ acpi_status acpi_os_prepare_sleep(u8 sleep_state,
 #define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
 #endif
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME)
+int acpi_dev_runtime_suspend(struct device *dev);
+int acpi_dev_runtime_resume(struct device *dev);
+int acpi_subsys_runtime_suspend(struct device *dev);
+int acpi_subsys_runtime_resume(struct device *dev);
+#else
+static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; }
+static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
+#endif
+
+#ifdef CONFIG_ACPI_SLEEP
+int acpi_dev_suspend_late(struct device *dev);
+int acpi_dev_resume_early(struct device *dev);
+int acpi_subsys_prepare(struct device *dev);
+int acpi_subsys_suspend_late(struct device *dev);
+int acpi_subsys_resume_early(struct device *dev);
+#else
+static inline int acpi_dev_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_dev_resume_early(struct device *dev) { return 0; }
+static inline int acpi_subsys_prepare(struct device *dev) { return 0; }
+static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; }
+static inline int acpi_subsys_resume_early(struct device *dev) { return 0; }
+#endif
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
+int acpi_dev_pm_attach(struct device *dev, bool power_on);
+int acpi_dev_pm_detach(struct device *dev, bool power_off);
+#else
+static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+	return -ENODEV;
+}
+static inline void acpi_dev_pm_detach(struct device *dev, bool power_off) {}
+#endif
+
 #endif	/*_LINUX_ACPI_H*/